* add hmip climate services
* Rename accesspoint_id to hapid
to comply with config
* Revert "Rename accesspoint_id to hapid"
This reverts commit 4a3cd14e1482fb508273c728ad8020945b02e426.
* Fix valve/thermostat out of reach
* Fix boost for valves
* Set netatmo default max temp to 30
* Remove unnecessary get
* Remove unnecessary default value
* Readd get
* initial commit
* refactor for sync
* minor tweak
* refactor convert code
* fix regression
* remove bad await
* de-lint
* de-lint 2
* address edge case - invalid tokens
* address edge case - delint
* handle no schedule
* improve support for RoundThermostat
* tweak logging
* delint
* refactor for greatness
* use time_zone: for state attributes
* small tweak
* small tweak 2
* have datetime state attributes as UTC
* have datetime state attributes as UTC - delint
* have datetime state attributes as UTC - tweak
* missed this - remove
* de-lint type hint
* use parse_datetime instead of datetime.strptime)
* remove debug code
* state atrribute datetimes are UTC now
* revert
* de-lint (again)
* tweak type hints
* de-lint (again, again)
* tweak type hints
* Convert datetime closer to sending it out
Persons are now threated the same as device trackers, so the logbook states
"<name> is at <location>" or "<name> is away" instead of "<name> changed to <location|not_home>"
Binary sensors now show phrases that relate to their device_class attribute.
So "Front door is closed" instead of "Front door turned off" or "Hallway PIR detected movement"
instead of "Hallway PIR turned on"
* Add support for World Wide Lightning Location Network
* Updated .coveragerc
* Added test
* Updated requirements
* Fixed tests
* Use local time for nearest strike
* Base geo location in place
* Finished geolocation work
* Fixed tests
* Cleanup
* Removed no-longer-needed method
* Updated requirements
* Add support for window and attrs
* Add strike ID to entity name
* Member comments
* Added CT80 Current Humidity Support
Added a check for if device is a CT80, and if so, queries the humidity object to get the current measured humidity reading.
* Update climate.py
Removed whitespace on line 229
* Update climate.py
Added humidity property. Version on local machine had that from previous tinkering.
* Update climate.py
Removed whitespace
* Update climate.py
Fixed tstat error handling for humidity data.
* Renames internal climate state variable to preset
* Shorten function comments
* Updates local variables on preset and temp changes
* Adds support for hvac_action
* Support populating list of flows from custom components
* Re-allow custom component config flows
* Add tests for custom component retrieval
* Don't crash view if no handler exist
* Use get_custom_components instead fo resolve_from_root
* Switch to using an event instead of lock
* Leave list of integrations as set
* The returned list is not guaranteed to be ordered
Backend uses a set to represent them.
* Add arcam_fmj support
* Just use use state in player avoid direct client access
* Avoid leaking exceptions on invalid data
* Fix return value for volume in case of 0
* Mark component as having no coverage
* Add new requirement
* Add myself as maintainer
* Correct linting errors
* Use async_create_task instead of async_add_job
* Use new style string format instead of concat
* Don't call init of base class without init
* Annotate callbacks with @callback
Otherwise they won't be called in loop
* Reduce log level to debug
* Use async_timeout instead of wait_for
* Bump to version of arcam_fmj supporting 3.5
* Fix extra spaces
* Drop somewhat flaky unique_id
* Un-blackify ident to satisy pylint
* Un-blackify ident to satisy pylint
* Move default name calculation to config validation
* Add test folder
* Drop unused code
* Add tests for config flow import
* bump envoy_reader version to 0.4
* bump dependency envoy_reader to 0.4
* Enphase envoy get individual inverter production
* Add period in function description
* Fix dumb typo
* Define _attributes in __init__
* Better error messages, make update async
* Fix format error
* Fix pylint errors
* set unknown state to None
* Bump envoy_reader version to 0.8
* Change attributes to separate sensors
* Fix dumb thing
* Improve platform_setup for inverters
* Remove unneeded self._attributes, refactor platform setup
* Refactor platform setup
* Implement Twilio SMS notify MediaUrl support
Adds support for setting the `media_url` parameter of the twilio API
client with an optional attribute under the notify `data`
attribute.
Per the twilio docs (https://www.twilio.com/docs/sms/send-messages#include-medi$
this feature is only available in the US and Canada, for
GIF, PNG, or JPEG content.
* lint: fix 80 char ruler
* use kwargs to set the media_url
after testing locally, seems like the previous way of using
object() was not working. this seems to be working
* re-use the ATTR_MEDIAURL attribute
* Make sure we use same family for ssl socket and connection
getaddrinfo result could be different from what connection
was made with. It also blocks potential use of
happy eye balls algorithm
This also fixes lingering sockets until python garbage
collection.
* Add availability value if unable to get expiry
* Fix lint issue
* Add support for aurora ABB Powerone solar photovoltaic inverter
* Add support for aurora ABB Powerone solar photovoltaic inverter
* Update stale docstring
* Fixed whitespace lint errors
* Remove test code
* Delete README.md
Website documentation contains setup instructions. README not needed here.
* Only close the serial line once.
* Correct newlines between imports
* Change add_devices to add_entites and remove unnecessary logging.
* Use new style string formatting instead of concatenation
* Directly access variables rather than via config.get
* Update sensor.py
* Update sleepyq to 0.7
Fixes crash when working with a single sleeper.
* sleepiq: Handle null side definitions
These happen if no sleeper is defined for a side of the bed. Don't
create sensors for null sides; they'll crash every time we try to use
them.
* sleepiq: Fix urls mocked to match sleepyq 0.7
* sleepi: Fix test_sensor.TestSleepIQSensorSetup
Sleepyq 0.7 throws on empty strings, so we have to specify them.
* sleepiq: Test for ValueError thrown by sleepyq 0.7
* sleepiq: Drop no longer used HTTPError import
* sleepiq: Add tests for single sleeper case
* sleepiq: Shorten comments to not overflow line length
* sleepiq: Use formatted string literals for adding suffixes to test files
* sleepiq: Use str.format() for test suffixing
* Add sonos.play_queue service
* Add SERVICE_PLAY_QUEUE import in alphabetical order
* Add queue_position parameter for sonos.play_queue service
* Move queue_position default to schema definition
* initial implementation for zha device trackers
* constant
* review comments
* Revert "review comments"
This reverts commit 2130823566820dfc114dbeda08fcdf76ed47a4e7.
* rename device tracker entity
* update trackers
* raise when not implemented
* Update homeassistant/components/device_tracker/config_entry.py
Review comment
Co-Authored-By: Martin Hjelmare <marhje52@kth.se>
* move source type to base state attrs
* review comments
* review comments
* review comments
* fix super call
* fix battery and use last seen from device
* add test
* cleanup and add more to test
* cleanup post zha entity removal PR
* add tests for base entities
* rework entity tests
* move availability handling to device
* update last_seen format
* add battery sensor
* fix interval
* fix battery reporting now that it is a sensor
* remove zha entities and add battery sensor
* Added ability to send attachments in pushover notifications
* Added full name for exception to satisfy static check
* Fixed hanging indent lint problem
* Added path checking, removed import re, changed url check method to use
startswith.
* Removed argument from logging statement.
* Changed IOError to OSError, fixed logging, added logging statement.
* tweak battery icons according to device state/availability
* tweak battery icons according to device state/availability 2
* make dt objects aware
* make dt objects aware 2
* woops - use util.dt in favour of datetime
* woops - use util.dt in favour of datetime 2
* refactor battery icon code, remove parallel_updates
PR #22457 added some code that used new methods in `sisyphus-control` 2.2.
Unfortunately, because of the move to manifests it was merged still depending
on 2.1.
Fixes#24834
* Add template vacuum component
* Fix linting issues
* Make vacuum state optional
* Fix pylint issues
* Add context to template vacuum service calls
* Added tests to template vacuum
* Fix indent
* Fix docstrings
* Move files for new component folder structure
* Revert additions for template_vacuum tests to common.py
* Use existing constants for template vacuum config
* Handle invalid templates
* Add tests for unused services
* Add test for invalid templates
* Fix line too long
* Do not start template change tracking in case of MATCH_ALL
* Resolve review comments
* Zestimate fix for issue #23837
removed references to MIN_TIME_BETWEEN_UPDATES
and replaced with SCAN_INTERVAL
* Zestimate fix for issue #23837
removed references to MIN_TIME_BETWEEN_UPDATES
and replaced with SCAN_INTERVAL
* Add time delta option when searching for connections
Add another option 'in' to search for upcoming connections in the future.
Handy if you need a few minutes to get to the train station and need to add that to the queried departure time.
* correct style errors
* rename new option
* rename new option (2/2)
* add offset correctly
* Cleanup ZHA entities model and manufacturer usage.
Zigpy includes manufacturer and model as attributes of a zigpy
Device class, which simplifies handling of manufacturer and/or model
derived properties for the ZHA platform.
* Sort ZHA imports.
* Lint.
* Fixed integration with ESPhome, which caused an error if ESPhome did not update fast enough on startup
* Set state to problem if sensor is unavailable
* Fix line length.
* Option to change sensor names
* Python 3.5 compatibility
* Oops
* Get serial number at start
* Remove config opportunity
* Oops comma
* Changes from review
* Check yourself before you commit.
* Added Trafikverket train component
* Updated manifest with proper name and codeowner
* Updated requirements and manifest
* Updated CODEOWNERS
* Corrected requirements
* Added trafikverket_train/sensor.py to .coveragerc
* Added error handling and log if API call fails
* Corrected styles, removed dev log, improved validation
* Method calls to async_update(), improved error handling
* Minor cleanup/reorg for effeciency
* Added station cache and corrected to fit standards
* Simplified trainstop id and cleaned up dict.get
* Corrected mistake after change from dict to array
* Change device class to timestamp
* Add a test for see service gaurd
* Guard from seeing devices part of entity registry
* Await registry task early
* Lint
* Correct comment
* Clean up wait for registry
* Fix spelling
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* Fix spelling
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* Vlc telnet first commit
First functional version, remains to add more functionality.
* New functions added and bugfixes
* Compliance with dev checklist
* Compliance with dev checklist
* Compliance with pydocstyle
* Removed unused import
* Fixed wrong reference for exception
* Module renamed
* Fixed module rename in other
* Fixed wrong reference for exception
Module renamed
Fixed module rename in other
* Update homeassistant/components/vlc_telnet/media_player.py
Accepted suggestion by @OttoWinter
Co-Authored-By: Otto Winter <otto@otto-winter.com>
* Update homeassistant/components/vlc_telnet/media_player.py
Accepted suggestion by @OttoWinter
Co-Authored-By: Otto Winter <otto@otto-winter.com>
* Update homeassistant/components/vlc_telnet/media_player.py
Accepted suggestion by @OttoWinter
Co-Authored-By: Otto Winter <otto@otto-winter.com>
* Update homeassistant/components/vlc_telnet/media_player.py
Accepted suggestion by @OttoWinter
Co-Authored-By: Otto Winter <otto@otto-winter.com>
* Suggestions by @OttoWinter
+Manage error when the VLC dissapears to show status unavailable.
* Removed error log, instead set unavailable state
* Changes suggested by @pvizeli
-Import location
-Use of constants
* Implemented available method
* Improved available method
* Vlc telnet first commit
First functional version, remains to add more functionality.
* New functions added and bugfixes
* Compliance with dev checklist
* Compliance with dev checklist
* Compliance with pydocstyle
* Removed unused import
* Fixed wrong reference for exception
* Module renamed
* Fixed module rename in other
* Fixed wrong reference for exception
Module renamed
Fixed module rename in other
* Update homeassistant/components/vlc_telnet/media_player.py
Accepted suggestion by @OttoWinter
Co-Authored-By: Otto Winter <otto@otto-winter.com>
* Update homeassistant/components/vlc_telnet/media_player.py
Accepted suggestion by @OttoWinter
Co-Authored-By: Otto Winter <otto@otto-winter.com>
* Update homeassistant/components/vlc_telnet/media_player.py
Accepted suggestion by @OttoWinter
Co-Authored-By: Otto Winter <otto@otto-winter.com>
* Update homeassistant/components/vlc_telnet/media_player.py
Accepted suggestion by @OttoWinter
Co-Authored-By: Otto Winter <otto@otto-winter.com>
* Suggestions by @OttoWinter
+Manage error when the VLC dissapears to show status unavailable.
* Removed error log, instead set unavailable state
* Changes suggested by @pvizeli
-Import location
-Use of constants
* Implemented available method
* Improved available method
* Breaking change: Rewrite opentherm_gw to add support for more than one OpenTherm Gateway.
Breaks config layout and child entity ids and adds a required parameter to all service calls (gateway_id).
* Add schema and parameter description for service opentherm_gw.reset_gateway.
* Add optional name attribute in config to be used for friendly names.
Fix bugs in binary_sensor and climate platforms.
* pylint fixes
* Remove unused variables.
* Update manifest.json, remove REQUIREMENTS from .py file
* Update CODEOWNERS
* Address issues that were brought up (requested changes):
- Move imports to module level
- Change certain functions from async to sync
- Move constants to const.py (new file)
- Call gateway setup from outside of __init__()
- Move validation of monitored_variables to config schema
* Address requested changes:
- Make module imports relative
- Move more functions from async to sync, decorate with @callback where necessary
- Remove monitored_variables option, add all sensors by default
* Add a test for see service gaurd
* Guard from seeing devices part of entity registry
* Await registry task early
* Lint
* Correct comment
* Clean up wait for registry
* Fix spelling
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* Fix spelling
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* Fixing tplink issues with offline devices during setup.
* Fixing circleci errors.
* Adding code to defer the creation of entities that are not online.
* Addressing code review changes and cleaning up a little.
* Fixing tests and static analysis.
* Adding test to satisfy coverage requirements.
* Resolving merge conflicts.
* Fixing issue where lights don't appear in the integration page.
* Using pyHS100 properties for most sysinfo.
Addressing some PR feedback.
* Addressing some PR feedback.
* Better testing async_add_entities_retry
Testing for static dimmers.
Making greater use of conf constants.
* Fixing all static analysis issues.
* Adding non-blocking call for getting discovering devices.
* Address PR feedback
* Quick & Dirty weather alert integration
* Add attributes in weather alert sensor.
* MeteoFranceUpdate returns dept to init the alert watcher
* add rain forecast to weather attribute
* Add checks when no weather alert data are available
* Improve date and state when online source is unreachable
* update to take into account new API of vigilancemeteo 3.0.0
* Clean local patchs and put requirements in manfiest.json
* Use only one proxy for weather alerts to avoid too much HTTP requests
* linting and comments style corrections
* Add error catching and debug logging
* Correction following PR checklist
* Add code owners
* Update requirements_all.txt
* Comment style
* Update CODEOWNERS after rebaseline with dev branch
* update requirements_all.txt
* initial version of qfes bushfire geolocation platform
* removed all occurrences of legally protected names; using new georss library
* regenerated codeowners
* fixed pylint
* added one more valid category
* moved library import to top and ran isort
* Fix validator for lcn.send_keys service
* Removed lowercase table names from send_keys and lock_keys validators
* Revert lowercase regex.
* Fixed table name regex.
* change us-based default temps to Fahrenheit
* update CODEOWNERS
* update CODEOWNERS
* tweak docstring
* tweak docstring
* Coerce Fahrenheit Temps to int
* Adds integration for Plaato Airlock
* Updates codeowners and coveragerc
* Fixes lint errors
* Fixers lint check error
* Removed sv translation file
* Adds en translation file
* Sets config flow to true in manifest
* Moves config flow and domain to seperate files
* Fixes lint errors
* Runs hassfest to regenerate config_flows.py
* Adds should poll property and fixes for loop
* Only log a warning when webhook data was broken
* Fixes static test failure
* Moves state update from async_update to state prop
* Unsubscribes the dispatch signal listener
* Update sensor.py
* Added toggle service to cover
* Added toggle tilt service and tilt closed property
* Added is_tilt_closed so tilt can be toggled
* Added toggle services
* Added toggle tilt service
* Removed spaces
* Added tests for tilt services
* Updated tests
* Added range conversion in comparison
* Added tests to cover broken areas
* Fixed open/close tilt values and added toggle function
* Added default toggle behavior using tilt_position of 0, reverted other changes
* blank space
* Added constants and swapped assert comparisons
* Fixed attribute name
* Added mqtt responses in test
* Added constants
* Space
* Fix tilt_optimistic flag being ignored if status topic set
* Added more tests
* Changed async toggle call
* Updated group tilt test
* Updated format of asserts
* Updated states calls
* Updated function variables
* merge fixes
* Added blank line
* Changed calls to async
* More async updates
* Extract const to a const file, Add battery as tracker attribute, add accuracy filter option
* Update homeassistant/components/traccar/device_tracker.py
Co-Authored-By: Otto Winter <otto@otto-winter.com>
* Update homeassistant/components/traccar/device_tracker.py
Co-Authored-By: Otto Winter <otto@otto-winter.com>
* Update homeassistant/components/traccar/device_tracker.py
Use [] syntax for keys that are in the validated data.
Co-Authored-By: Otto Winter <otto@otto-winter.com>
* Fix indentation
* Update aioswitcher requirement to 2019.4.26.
* Removed unnecessary legacy function call.
* Fixed log message capital first letter.
* Replaced None argument with empty dict.
* Replaced guard.
* Added ServiceCallType.
* Added set_auto_off and update_device_name services to the component.
* Added test cases for service calls.
* Conditioned the component services registry with the platform discovery.
* Update homeassistant/components/switcher_kis/__init__.py
Co-Authored-By: TomerFi <tomer.figenblat@gmail.com>
* Update homeassistant/components/switcher_kis/__init__.py
Co-Authored-By: TomerFi <tomer.figenblat@gmail.com>
* Resolved change requests.
* Added ContextType.
* Addes permission verification for service calls.
* Added test cases for permision verification and more.
* Replaced POLICY_CONTROL with the more suited POLICY_EDIT.
* More appropriate function name.
* Added domain and entity_id validation for calling services.
* Removed service for setting the vendor's device name.
* Added name to sensors
Added name to sensors, should allow for multiple devices.
This should fix#22571 and #21591
* Update sensor.py
Fixed spelling issue, and line too long
* Update sensor.py
Removed _ as it is a friendly name
* Separate yeelight light classes
* Removed not used variable
* Allow to create device right away, when model is declared
* Lint fixes
* Use correct brightness, when nightlight mode is on
* Pylint fix
* Add power property
* Fix imports
* Update homeassistant/components/yeelight/light.py
Co-Authored-By: Teemu R. <tpr@iki.fi>
* Small PR fixes
* Simplify device to yeelight class mapping
* Simplify device initialization code
* Fix comment
Some location update messages do not contain the 't' (trigger) key. Before the change in 0.94 to
entity based trackers, these would default to source_type of 'gps' (due to default parameter
value in async_see method.) To mirror this behavior in the new entity based tracker, the
source_type property should default to SOURCE_TYPE_GPS under the same conditions.
Some location update messages do not contain the 't' (trigger) key. Before the change in 0.94 to
entity based trackers, these would default to source_type of 'gps' (due to default parameter
value in async_see method.) To mirror this behavior in the new entity based tracker, the
source_type property should default to SOURCE_TYPE_GPS under the same conditions.
* Add camera for buienradar radar
* Use asyncio.Conditions instead of asyncio.Lock
* Add test and fix python 3.5 compatibility
* rename interval to delta for consistency with BOM integration
* fix linting error introduced during rebase
* Improved buienradar.camera documentation and tests
* Incorporated one comment on a redundant/cargo cult function
* Improved documentation
* Increase test coverage by fixing one test by making it a coroutine
(to make it actually run), adding another test case, and changing
the flow in the implementation.
* style changes after review, additional test case
* Use python 3.5 style mypy type annotations in __init__
* Remove explicit passing of event loop
* Adopt buienradar camera as codeowner
* Update manifest.json
* Update CODEOWNERS through hassfest
Updated CODEOWNERS through hassfest (instead of manually), thanks to
@balloob for the hint.
* Support ZLO device types
Support the device types that are added in https://github.com/zigpy/zigpy/pull/176
so newer Zigbee devices can be supported.
* Remove BINARY_SENSOR mappings
* Add back ON_OFF_LIGHT_SWITCH, DIMMER_SWITCH and COLOR_DIMMABLE_LIGHT
Since they are target devices I've added them as switch and lights,
which matches the Zigbee documentation.
* Upgrade to zigpy-homeassistant v0.5.0
To be able to use the new DeviceTypes
* Add Linky sensors : yesterday + months + years
- SCAN_INTERVAL to 4 hours
- Always close_session after getting the data
- Add username attr
- Fix not updating Linky sensor when Enedis API fails
* Fix @balloob review: remove monitored_conditions
* Add APRS device tracker component
This component keeps open a connection to the APRS-IS infrastructure so
messages generated by filtered callsigns can be immediately acted upon.
Any messages with certain values for the 'format' key are position
reports and are parsed into device tracker entities.
* Log errors and return if startup failure
* Fix unit tests
* CREATE Somfy component
* CREATE cover Somfy platform
* USE somfy id as unique id
* UPDATE all the devices in one call to limit the number of call
* FIX Don't load devices if not yet configured
* IMP Replace configurator by a simple notification
* ADD log in case state does not match
* IMP wording
* REMOVE debug stuf
* ADD support for tilt position
* UPDATE requirements
* FIX Use code instead of authorization response
- Will allow to setup Somfy without https
* HANDLE stateless devices (Somfy RTS)
* FIX import locally 3rd party library
* UPDATE pymfy to 0.4.3
* ADD missing docstring
* FIX For Somfy 100 means closed and 0 opened
* FIX position can be None
* ENHANCE error management when error 500 occurs at setup
* FIX indent
* ROLLBACK tilt modification
- See https://community.home-assistant.io/t/somfy-tahoma-official-api/61448/90?u=tetienne
* FIX Look for capability instead of state
* DON'T use exception to test if a feature is available
* UPDATE dependency
* ADD device_info property
* AVOID object creation in each method
* REMOVE unused constants
* ADD missing doc
* IMP Only make one call to add_entities
* USE dict[key] instead of get method
* IMP Don't pass hass object to the entities
* FIX Don't end logging messages with period
* USE config entries instead of a cache file
* IMPLEMENT async_unload_entry
* CONSOLIDATE package
- see home-assistant/architecture#124
* UPDATE to pymfy 0.5.1
* SIMPLIFY config flow
* ADD French translation
* FIX 80 vs 79 max length
* ABORT flow asap
* FIX A tupple was returned
* MIGRATE to manifest.json
* ADD a placeholder async_setup_platform coroutine
- It's currently required and expected by the platform helper.
* FIX codeowner
* ADD missing translations file
* USE new external step
* UPGRADE pymfy version
* Close Somfy tab automatically
* ADD manufacturer
- Somfy only for the moment.
* HANDLE missing code or state in Somfy request
* REMOVE unused strings
* DECLARE somfy component to use config_flow
* APPLY static check remarks
* FIX async method cannot be called from sync context
* FIX only unload what has been loaded during entry setup
* DON't catch them all
* DON'T log full stacktrace
* ABORT conflig flow if configuration missing
* OMIT Somfy files for coverage
* ADD tests about Somfy config flow
* ADD pymfy to the test dependencies
* fix(hue): Load the SSDP component only when it's needed
* fix(deconz): Don't load the SSDP component when it's not needed
* Update config_flow.py
* Update test_config_flow.py
Was improperly generating a warning each restart.
Was not properly handling a password change in configuration.
Was not properly removing config entries for accounts removed from configuration.
* fix(hue): Load the SSDP component only when it's needed
* fix(deconz): Don't load the SSDP component when it's not needed
* Update config_flow.py
* Update test_config_flow.py
* Improve amcrest error handling and bump amcrest package to 1.5.3
amcrest package update fixes command retry, especially with Digest Authentication, and allows sending snapshot command without channel parameter.
Get rid of persistent_notification.
Errors at startup, other than login errors, are no longer fatal.
Display debug messages about how many times an error has occurred in a row.
Remove initial communications test. If camera is off line at startup this just delays the component setup.
Handle urllib3 errors when getting data from commands that were sent with stream=True.
If errors occur during camera update, try repeating until it works or the camera is determined to be off line.
Drop channel parameter in snapshot command which allows camera to use its default channel, which is different in different camera models and firmware versions.
Make entities unavailable if too many errors occur in a row.
Add new configuration variables to control how many errors in a row should be interpreted as camera being offline, and how frequently to "ping" camera to see when it becomes available again.
Add online binary_sensor option to indicate if camera is available (i.e., responding to commands.)
* Update per review comments
Remove max_errors and recheck_interval configuration variables and used fixed values instead.
Move definition of AmcrestChecker class to module level.
Change should_poll in camera.py to return a fixed value of True and move logic to update method.
* Use LAN status instead of wireless status for DD-WRT device tracking
* Use the previous DD-WRT device tracker behavior unless specified in the configuration
* Add support for DoorLock cluster
* Add test for zha lock
* Change lock_state report to REPORT_CONFIG_IMMEDIATE
* Update channel command wrapper to return the entire result
This allows for return values other than result[1]
* Fix tests
* Fix lint
* Update DoorLock test to work with updated zigpy schema
* Fix lint
* Fix unlock test
* Refactor Waze Travel Time & Update Requirements
Refactored Waze Travel Time to contain a data object.
Changed error retrieving data to a warning.
Added distance conversion depending on region.
Removed dependency on TRACKABLE_DOMAINS list.
Update to use WazeRouteCalculator 0.10
3rd time's a charm. Deleted fork, caused last PR to screw up. So here we are.
* Update requirements_all.txt
* Revert package upgrade.
* Revert package upgrade.
* Bring the Sisyphus integration to silver quality
Checklist:
- [x] (N/A - push integration) Set an appropriate SCAN_INTERVAL (if a polling integration)
- [x] Raise PlatformNotReady if unable to connect during platform setup
- [x] (N/A - no credentials) Handles expiration of auth credentials. Refresh if possible or print correct error and fail setup. If based on a config entry, should trigger a new config entry flow to re-authorize.
- [x] (N/A - local integration) Handles internet unavailable. Log a warning once when unavailable, log once when reconnected.
- [x] Handles device/service unavailable. Log a warning once when unavailable, log once when reconnected.
- [x] Set available property to False if appropriate
- [x] Entities have unique ID (if available)
* Feedback (fix a couple verbose places)
* Use a task instead of a lock
* Initialize field in constructor
* Revert package upgrade.
* Add Streamlabs Water Monitor
* Fail Streamlabswater component setup when given invalid parameters
The Streamlabs Water component is unable to recover if it is given
an invalid API key or location id so this change is to ensure
we validate they are correct during setup and return a failure
if they are not.
* Prime Streamlabswater component sensors so data is available immediately
The sensors for the component were not causing an immediate load of
data from the API when being set up so there was some lag after
startup before values would show up. This change does an explicit
update when the sensors are setup to ensure data is viewable
immediately after startup.
* Switch Streamlabswater logging to use %s for string formatting
* Update Streamlabswater component with correct dependencies
Dependencies were incorrectly specified using DEPENDS rather
than DEPENDENCIES
* Streamlabswater pull request feedback
Remove detailed class docstrings since they're in the documentation,
reduce code duplication in sensor classes, and remove periods from
the end of log messages.
* Reduce line length in Streamlabswater sensor
* Add docstring on Streamlabswater service callback method
* Get rid of unnecessary initializers in Streamlabswater sensor
* Add manifest file for Streamlabs Water Monitor
* Remove unused REQUIREMENTS
* Added Google Cloud TTS service component feature
* Added Neutral voice gender
* Added line break at the end of files
* Updated CODEOWNERS, reqirements_all.txt and .coveragerc
* Fixed some ci/circleci: static-check errors
* Fixed some ci/circleci: static-check error
* Fixed some ci/circleci: pylint errors
* Fixed some ci/circleci: pylint errors
* * made supported_options const
* fixed direct env variable access
* Fixed import order
* * Component renamed
* Added encoding parameter
* Other fixes
* Changed folder name in .coveragerc
* * Removed whitespaces in blank lines
* Split long line
* Removed whitespaces in blank lines
* ci/circleci: static-check
* Fixed requirements_all.txt
* Added speed, pitch and gain parameters
* Added speed, pitch and gain as supported options
* Split too long line
* * Added profiles parameter
* Changed supported languages and encodings values
* Added parameters validations
* Fixes
* Fixes
* Fixes
* Fixes
* Fixes
* Changed options validation
* Added ToggleEntity save and restore state mechanism
* Revert "Added ToggleEntity save and restore state mechanism"
This reverts commit 0e275014
* Basic local SolarEdge monitoring for energy / power
* Basic local SolarEdge monitoring for energy / power
* generated CODEOWNERS, requirements, excluded tests
* generated CODEOWNERS, requirements, excluded tests
* lint fixes, etc
* lint fixes, etc
* Fix docstyle for init
Of course thats the file I forgot to run tests on
* Load all sensors by default
They use the same API endpoint. This changes was made per https://github.com/home-assistant/architecture/pull/244
* remve unneded date/time
* ran hassfest again
* add throttle when updating
* readd solax, mistakenly removed
* Update sensor.py
* Add support for learning new commands
This update creates a generic service in the 'remote' component to enable remote control platforms to learn new commands.
* Update __init__.py with the proposed changes
- Add 'supported_features' property and a constant related to the 'learn_command' functionality.
- Redefine 'async_learn_command' function as a coroutine.
* Update __init__.py
* Fix assertion error
Adding the 'supported_features' attribute generated an assertion error on the 'Demo Remote' platform. This update fixes this.
* Fix duplicated 'hass' object
This update fixes a typo that occurred at the last update.
* Update cover.py
Blinds, Rollingshutters and Awnings did not set their respective device_class attribute
Previously they would all appear as device_class "window"
* fallback device class is always 'window'
fallback device class is always 'window' in the event we have an unknown cover type
* trailing whitespace removed, trimmed as well
* Update cover.py
* Migrate deCONZ to use new SSDP discovery
Add new discovery info manufacturer URL to be able to separate Hue and deCONZ bridges
* Mark deCONZ as migrated in Discovery component
* Fix tests
* Fix Hue discovery ignore deCONZ bridge
* Less snake more badger
* Mushroom
* Fix indentation
* Config flow ignore manufacturer url that is not philips
* Migrate deCONZ to use new SSDP discovery
Add new discovery info manufacturer URL to be able to separate Hue and deCONZ bridges
* Mark deCONZ as migrated in Discovery component
* Fix tests
* Fix Hue discovery ignore deCONZ bridge
* Less snake more badger
* Mushroom
* Fix indentation
* Config flow ignore manufacturer url that is not philips
* Add service for adding event to google component
* Add service examples for google.add_event
* add refactoring based on reviews
* Fix too long lines
* Order import
* Move to move line
* Remove parenthesis
* Add service for adding event to google component
* Add service examples for google.add_event
* add refactoring based on reviews
* Add check for correct scopes, otherwise re-authenticate
* fix build failure
* fix build failure
* Adds AdGuard Home integration
* 👕 Addresses linting warnings
* 🚑 Fixes typehint in async_setup_entry
* 👕 Take advantage of Python's coalescing operators
* 👕 Use adguard instance from outer scope directly in service calls
* 👕 Use more sensible scan_interval default for sensors
* 👕 Adds specific files to .coveragerc
* ☔ Added tests and small changes to improve coverage
* 🔨 Import adguardhome dependencies at the top
* 🚑 Converted service handlers to be async
* 🔥 Removed init step from config flow
* Bump skybellpy to 0.4.0
* Bump skybellpy to 0.4.0 in requirements_all.txt
* Added extra states for STATE_ALARM_TRIGGERED to allow users to know if
it is a burglar or fire or carbon monoxide so automations can take
appropriate actions. Updated TotalConnect component to handle these new
states.
* Fix const import
* Fix const import
* Fix const imports
* Bump total-connect-client to 0.26.
* Catch details of alarm trigger in state attributes.
Also bumps total_connect_client to 0.27.
* Change state_attributes() to device_state_attributes()
Enable feature by default but allow it to be disabled by "control_light: false" in config.
Get brand from camera instead of assuming Amcrest (since this works with other cameras, too.)
Retrieve RTSP URL in update method instead of in stream_source property and in handle_async_mjpeg_stream method.
Move amcrest imports from methods to global.
* Fixing tplink issues with offline devices during setup.
* Fixing circleci errors.
* Adding code to defer the creation of entities that are not online.
* Addressing code review changes and cleaning up a little.
* Fixing tests and static analysis.
* Adding test to satisfy coverage requirements.
* Resolving merge conflicts.
* Fixing issue where lights don't appear in the integration page.
* Using pyHS100 properties for most sysinfo.
Addressing some PR feedback.
* Addressing some PR feedback.
* Better testing async_add_entities_retry
Testing for static dimmers.
Making greater use of conf constants.
* Fixing all static analysis issues.
* Adding non-blocking call for getting discovering devices.
* Address PR feedback
* Revert back to previously used library
* Fix test
* Remove unused import
* Fix import
* Update __init__.py
* Update __init__.py
* Fix test after rebase
* Move tradfri component to use new zeroconf discovery
* Will this work?
* Remove prints
* Correct order in generated zeroconf
* Update test_init.py
* Update test_init.py
* Update test_init.py
* Update test_init.py
* Extract exposed devices function
* Add might_2fa info to trait
* Do not filter with should_expose in Google helper func
* Cloud: allow setting if Google entity is exposed
* Allow disabling 2FA via config
* Cloud: allow disabling 2FA
* Lint
* More changes
* Fix typing
* Bumped to version 2.0
* Updated requirements
* Updated requirements and coveragerc
* Removed long lines, changes to coveragerc and requirements
* Fixed under-indented lines
* Fixed invalid syntax
* Updated .coveragerc to include repetier/__init__.py and sensor.py
* Module update
* Rebased to latest dev
* Blank lines fix
* Add missing manifest.json
* Update requirements
* Bumped component to new API module style
* Removed whitespaces and line feeds
* Added missing newline
* Added missing heated chamber sensor
* Fixed wrong indentation
* Various fixes
* Various build fixes
* Clean up
* Load platform only once
* Sort imports
* Add printer api
* Clean up
* Build out sensor classes
* Clarify temperature sensor variable names
* Move constants
* Clean up name
* Run script/gen_requirements_all.py
* Working code, missing auto add of new sensors
* Updated code to return proper device_class and timestamp
* Removed unnessecary code
* Renamed elapsed and remaining sensors
* Dynamically adding sensors as they become available
* Rebased .coveragerc due to conflicts
* Code changes and cleanup
* Removed whitespace and code simplification
* Use global import for ESPHome
* Add aioesphomeapi to test requirements
aioesphomeapi is also shipped as a pure-python wheel, so this should not impact test install time
* Improved sensors
* Lib update signalling
* Replace reason with changed
* Move imports to top of file
* Add support for secondary temperature reported by some Xiaomi devices
* Bump dependency to v59
* Use central polling to update entities
* Fix for line length
* Remove unnecessary import
* Use interval
* Trigger entity refreshes after commands
* Lint
* v1 of Azure Event Hub History component
* updates to EH
* small fix
* small updates and changed requirements_all
* new version of Event Hub component
* redid config to just ask names
* small edit
* latest version of EH component
* updated codeowners
* codeowner fix
* typo in domain
* updates based on reviews.
* using built-in jsonencoder for DT
* delete unused import
* Solax inverter direct API
* Linter compliance
* lint++
* move api communication to external lib
* lint++
* requirements
* Revert "requirements"
This reverts commit 82a6c0c095.
* potentially?
* Addressing review comments
* Also update CODEOWNERS
* Only update sensor state if data has changed
* Moved helper functions to const.py
* Removed pypck attribute from LcnDevice
* Bump to pypck==0.6.0
* Added myself as a codeowner
* Moved helper functions to helpers.py
* Added support for MCP23017 I2C GPIO extender.
* Updated .coveragerc to exclude mcp23017 component from tests.
* Generated CODEOWNERS for mcp23017 usign script.
* Removed .svn folder that had been accidentally uploaded.
* Added link to www.home-assistant.io docs in manifest.json
* Fixed logic error in switch platform.
* Cleaned up code and removed unnecessary should_poll() function.
* Limited the options for pull mode to UP and DOWN
* Fixed line too long in binary sensor.
* Fixed line too long on switch.py
* Changed to setup_platform.
* Reorder constants
* Change timeout from 5 seconds to 10 seconds
Underpowered platforms timeout during configuration/discovery of a Hue bridge on a new install. Increasing this timeout fixes this.
* Add 'adb_response' attribute to Android TV / Fire TV
* Use None instead of empty string for empty ADB responses
* Initialize self._adb_response as None, not empty string
* Update the state after sending an ADB command
This ensures that the `'adb_response'` attribute contains the response to the latest command
* Zestimate: fix for issue #23757
Changed name property to return Zestimate
and the property address. This will make it easier
distinguish multiple Zestimate sensor entities
in the UI.
Also removed MIN_TIME_BETWEEN_UPDATES in
favor of SCAN_INTERVAL per suggestion from
amelchio#9580 on Discord
* Zestimate fix for issue #23757
Changed name property to return Zestimate
and the property address. This will make it easier
distinguish multiple Zestimate sensor entities
in the UI.
* Changed name property to return Zestimate
and the property address. This will make it easier
distinguish multiple Zestimate sensor entities
in the UI.
* moved code fix to the correct function
* removed code change from unique_id function
* Fix entity id naming when not using first install
Currently, the verisure component will use the alias of the first
installation to decide entity id of the alarm_control_panel even though
a different installation is configured through a specified giid. This
fixes that
* Fixed pulled request review comments
* Remove trailing whitespace
* Fix remaining pylint errors
* Proof of concept
* Follow comments
* Fix line length and bad imports
* Move imports to top
* Exception handling for unicode decoding
Create debug print for new service types
Add empty test files
* First try at a test
* Add type and name to service info
Fix static check
* Add aiozeroconf to test dependencies
* Use HA defined timezone
* Cleanup
* Use homeassistant.util.dt.now to get the correct time.
* Update homeassistant/components/vasttrafik/sensor.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* Remove schedule management. Allow custom HTTP events defined in the configuration
* Consolidate doorbird request handling. Make token a per device configuration item.
* Lint fixes
* Do not register dummy listener
* Remove punctuation
* Split up method to allow caching event
* Lower frequency of updates.
* Code review patches.
* Minor changes to test
* Skip end of period at fixed multiple of delta.
Improved documentation.
* Initial commit
* add lastComms and de-lint
* dummy commit
* dummy commit 2
* refactor to temp in favour of battery
* back to battery, and no temp
* use snake_case
* Bump client
* only v3 API exposes device attributes
* delint
* delint2
* Change GeniusSwitch to GensiusBinarySensor
* Use aiozeroconf in preparation for new zeroconf discovery
* Update requirements
* Remove sleep
* Make stop zeroconf a coroutine
* Remove unused import
* Fix aiozeroconf dependency in default_config tests
* updated list of supported fan_modes
* AirBase units does not support Holiday-mode
* AirBase units does not support outside temp
* pydaikin version bump
* don't modify constant
* Start moving parts of yaml utils to own module
Move parts of yaml loader out of the single large file and start
to create the structure of the yaml loaders in Ansible [0].
[0]: https://github.com/ansible/ansible/tree/devel/lib/ansible/parsing/yaml
* Finish yaml migration, update tests and mocks
* Move code around to finish the migration
* Update the mocks so that `open` is patched in
`homeassistant.util.yaml.loader` instead of
`homeassistant.util.yaml`.
* Updated mypy ignores
* Updated external API of `homeasistant.util.yaml`, see below:
Checked what part of the api of `homeassistant.util.yaml` was actually
called from outside the tests and added an `__ALL__` that contains only
these elements.
Updated the tests so that references to internal parts of the API (e.g.
the yaml module imported into `homeassistant.util.yaml.loader`) are
referenced directly from `homeassistant.util.yaml.loader`.
In `tests/test_yaml.py` the import `yaml` refers to
`homeassistant.util.yaml` and `yaml_loader` refers to `~.loader`.
Future work that remains for the next iteration is to create a custom
SafeConstructor and refers to that instead of monkey patching `yaml` with
custom loaders.
* Update mocks in yaml dumper, check_config
* Update Sesame component to use Candy House's library using the V3 API
* Updated requirements_all.txt
* Fix pylint warning
* Revert back to ATTR_DEVICE_ID
* Try to make the process more readable and paritioned.
* Validate child values using set message.
* Only validate using relevant schemas.
* Extract node validation.
* Rework const types and schemas.
* Rework child validator.
* Enhance warning logging message.
* Return an extra oauth2 auth code during onboarding
* Areas in const
* Add integration step
* Lint
* Fix tests
* Fix test
* Verify integration added to done
* Verify step is marked as done
* Added new component meteoalarm
* Update sensor.py
* Update manifest.json
* Update manifest.json
* Update manifest.json
* Added file CODEOWNERS
* Modified some code, thanks @amelchio
* removed Throttle because is not being used anymore
* Update _attributes ad _state
* some cleanup
* Update sensor.py
Change sensor to binarysensor
* Rename sensor.py to binary_sensor.py
rename the file
* Update binary_sensor.py
Removed BinarySensorDevice from class
* Update binary_sensor.py
Made a mistake with BinarySensorDevice
* Update binary_sensor.py
clean up white spaces
* Update binary_sensor.py
Fix BinarySensorDevice
* Update binary_sensor.py
cleanup the import libs
* modified __init__
* fix
* final fix, thanks @amelchio
* forgot to change the sensor.py
* correct some typo in text
* fix typos
* fix another typo
* fix typo
* Add TTL custom support and custom headers support.
* fix pywebpush version
* removed whitespaces surrounding docstrings.
* fixes for tests
* priority option to data
* checking of ATTR_ENDPOINT
* change checking of target to vol.Schema
* more tests
* Clean and fix google calendar tests
* Extract test calendar constant for google test
* Rewrite google calendar tests
* Clean and fix google calendar tests
* Clean and fix google component tests
* Add google conftest
* Skip flaky google calendar test
* Fix google calendar bug
* Fix yield fixture
* Set fixture names to avoid lint warning
* Fix yield fixture
* Updated to the current version of dev
* Added the component to .coveragerc
* Added __init__.py and manifest.json
* Changed the manifest to comply the json format
* Changes in for complete the PEP8 Code
* Fixed the api call to use PyPI package
* Fixed API correrct call
* Fixes for complete the requirements
* Added dependencies in manifest.json
* Changed the __init__.py to complete PEP8
* Simplified the __init__.py
* Runned codeowner script
* executed gen_requirements_all.py
* Direct call for dicts and unit changed to minutes
* Fixed the optional dict call, sorry, my bad, I did not that
* Deleted unused vars
* Changed optional parameter to required
* Remove blank first line
* Onvif camera improvements using zeep
* Fix static code checks
* Make obtain_input_uri async
* Convert several methods to async
* Fix static checks
* Fix static checks
* Fix requirements_all.txt
* Lint improvements
* Async services
* Use onvif-zeep-async and check if PTZ service is available before creating it
* Remove some hacks that are now defined in onvif-zeep-async
* Don't log input, it might contain sensitive information
* Static code analysis fixes
* Run requirements stuff
* Fix
* Remove suds requirement
* Onvif camera improvements using zeep
* Fix static code checks
* Make obtain_input_uri async
* Convert several methods to async
* Fix static checks
* Fix static checks
* Fix requirements_all.txt
* Lint improvements
* Async services
* Use onvif-zeep-async and check if PTZ service is available before creating it
* Remove some hacks that are now defined in onvif-zeep-async
* Don't log input, it might contain sensitive information
* Static code analysis fixes
* Run requirements stuff
* Fix
* Remove suds requirement
* Use dt_util.utcnow
* Platform setup should not have a return value
* Remove explicit dependency to zeep[async]
* Bump onvif-zeep-async to 0.1.2
* Update requirements_all.txt
* Add exception handling
* Fix static checks
* Don't catch generic exceptions
* Update camera.py
* refactor - add const.py, change order of propertys, methods
* import client at top of file
* remove debug line
* de-lint
* delint
* add me as CODEOWNER
* remove lint hint
* delint
* Prevent turning on tellduslive lights with 0 brightness
It was possible for the light compontent to get in a state where the last_brightness was set to zero, and when turning on (by calling turn_on) it would call the TellStick with 0 dim level, ergo not turning on the light.
With this, it will fall back on a 75% dim level if the level is set to zero.
* Wrap long log line over two lines
And using a more proper way of formatting the message
* Fallback to 100% instead of 75%
* Make entity_filter be a modifiable builder
* Add render_with_collect method
* Use sync render_with_collect and non-class based test case
* Refactor: Template renders to RenderInfo
* Freeze with exception too
* Finish merging test changes
* Removed unused sync interface
* Final bits of the diff
* ptvsd debugger component.
* Add test case
* ptvsd as test dependency
* Fix for 3.5
* Fixed bootstrap test
* Use dict direct lookup.
* Don't need to load dependencies.
* Get the test working.
* 3.5 fix
* Set mock return value
* Put tests back, but skip them
* Change log level
fix check for already created entities
remove hepa and carbon filter
add AQI attribute
initial commit
fix check for already created entities
remove hepa and carbon filter
add AQI attribute
add air quality component tests
fix method call tests
fix line lengths
fix pylint issues
fix docstrings
revert fan related changes
remove whitespace change
fix fan update state test
add for loop for platform initialization
add requested changes to aiq platform
change string concatenation to new style string formatting
update air quality tests
update air quality tests
refactor sensor component changes
fix pylint issues
fix debug string in the air quality component
replace failing tests for older devices
fix line length fan tests
remove dependencies const and move imports
move back imports to methods
remove whitespace from blank line
* Always print invalide configuration data
* Print offending data as yaml
* Revert "Print offending data as yaml"
This reverts commit 01721a21a9ff918ed2c8595151ebfe55eb2f7d36.
* Do not print sensitive data
* Print MQTT topic
* Add line break
* Review comments
* review comments
Fixed AlexaPowerController to report power state for thermostats, to look if state is OFF return OFF, otherwise report ON as thermostats have multiple values for ON
* Don't send volume on volume set
This needs updated lib
* Bump version and avoid getting channels explicitly
* Add myself as codeowner
* Use version 0.0.8 instead which doesn't reuse session
Some TV's doesn't play nice with HTTP/1.1 connection
re-use.
* Add new requirement to requirements_all.txt
The config option 'max_result' was assigned to not existing 'max_result' variable, it should be assigned to 'maxResult'.
The current version causes an error when max_result option is used.
* Added option to use self-signed certificates
I defined a new option for configuration.yaml, 'verify_ssl', which is set to 'True' by default for obvious security reasons. However, in order to work with self-signed certificates, it is now possible to disable the certificate validation.(eg, I use a nextcloud instance with self-signed certificates)
Credit for code in line 57 goes to user 'gen2' on the homeassistant community, who suggested this solution.
https://community.home-assistant.io/t/caldav-configuration/38198/25
I only took it a step further and made it a config option.
* Update calendar.py
* Added the import of CONF_VERIFY_SSL
I hope this passes the test now...
* Update homeassistant/components/caldav/calendar.py
Cool! Didn't know about that possibility, my coding experience is literally two weeks. Thanks for sharing!
Co-Authored-By: anrudolph <49680492+anrudolph@users.noreply.github.com>
* Removed some lines of code
I think, in order for the last commit to work, these lines have to be removed. Correct?
* Trying to get this passing the checks
Trying around to get the simplified code to work
Improve sdcard sensor so it only sends one command to camera per update as opposed to the four it used to send to reduce network traffic and make data consistent. Also better handle returned values of 'unknown'.
* Refactor NETATMO_AUTH to use hass.data
* Minor cleanup
* Rename conf to auth and other suggestions by Martin
* Revert webhook name change
* Rename constant
* Move auth
* Don't use hass.data.get()
* Fix auth string
* Allow host/ipv6 address for broadlink service
This matches switch config and is a regression fix
* Restore padding of packets for broadlink
* Drop unused import
* Fix comment on test
* Add amcrest camera services and deprecate switches
- Implement enabling and disabling motion detection from camera platform.
- Add amcrest specific camera services for controlling audio stream, motion recording, continuous recording and camera color mode, as well as moving camera to PTZ preset and starting and stopping PTZ tour function.
- Add camera attributes to indicate the state of the various camera settings controlled by the new services.
- Deprecate switches in favor of camera services and attributes.
* Rename services and move service handling to __init__.py
Rename services from 'camera.amcrest_xxx' to 'amcrest.xxx'. This allows services to be documented in services.yaml.
Add services.yaml.
Reorganize hass.data[DATA_AMCREST] and do some general cleanup to make various platform modules more consistent.
Move service handling code to __init__.py from camera.py.
* Update per review comments, part 1
- Rebase
- Add permission checking to services
- Change cv.ensure_list_csv to cv.ensure_list
- Add comment for "pointless-statement" in setup
- Change handler_services to handled_services
- Remove check if services have alreaday been registered
- Pass ffmpeg instead of hass to AmcrestCam __init__
- Remove writing motion_detection attr from device_state_attributes
- Change service methods from callbacks to coroutines
* Update per review comments, part 2
- Use dispatcher to signal camera entities to run services.
- Reorganize a bit, including moving a few things to new modules const.py & helpers.py.
* Update per review comments, part 3
Move call data extraction from camera.py to __init__.py.
tox fails due to being unable to reference the `script` module when
trying to run `script/gen_requirements_all.py`. Instead it needs to be
run as a module.
* Implement EnOcean temperature and humidity sensors.
* Bump EnOcean version to 0.50
* Refactor components for more generic device handling
* Move radio packet data interpretation to specific devices
* Update CODEOWNERS
* Implement code review changes
* Bump Ecovacs dependency (sucks)
Update to new version of sucks, which switches to a custom-built SleekXMPP that turns off certificate validation. This is to fix issues caused by Ecovacs serving invalid certificates.
* Update requirements file
* Fix non syncthru-syncthru supporting printers
* Formatting
* Update requirements_all
* Update syncthru.py
* Fix component to be async (as is the used SyncThru implementation)
* Add async syntax
* Omit loop passing
* Don't await async_add_platform
* Generate new all requirements
* Explain, why exception is caught in setuExplain, why exception is caught in setupp
* Handle failing initial setup correctly
* Formatting
* Formatting
* Fix requested changes
* Update requirements and add nielstron as codeowner
* Run codeowners script
* Make notification about missing syncthru support a warning
* Revert pure formatting
* Fix logging
* Add action.devices.traits.Volume
* Drop media player from brightness trait
* Factor out commands into separate functions
* Drop support for explicit mute
* Expose door cover/binary_sensor as door type
More logical to ask "What doors are open" than "What sensors are open"
* Add test for binary_sensor device_classes
* Cosmetic flake8
* Add test for device class for cover
* reorg HmiP Imports after introduction of manifests
* add type to some functions
* fix usage of dimLevel (HomematicipDimmer,HomematicipNotificationLight)
* align naming to HomematicipMultiSwitch: channel_index -> channel for (HomematicipNotificationLight)
* fix lint
* Fix is_on for dimmers
* fix lint
* Drop unused constant
* Don't default to localhost
A philips tv will never run on localhost
* Use library internal state
* Add play media support for channels
* Control update manually
This allow us to delay update of state when we perform
and action.
* Bump version for support for api v1 again
* Consider missing source and only channels as channels
* Fix some flake8 tasks
* Fix some pylint errors
* Adjust requirements_all file
* Switch to async_add_executor_job
* Assume device turns of off a sucessfull standby call
* Added component named switcher_kis switcher water heater integration.
* Fixed conflicts.
* Updated requirements.
* Added manifest.json file and updated CODEOWNERS.
* Fixed requirements_all.txt.
* Better component tests.
* Removed unnecessary parameter from fixture function.
* Removed tests section from mypy.ini.
* Remove unused ENTITY_ID_FORMAT.
* Stop udp bridge when failed to setup the component.
* Replace DISCOVERY_ constants prefix with DATA_.
* Various change requests.
* Fixed constant name change remifications.
* Added explicit name to fixture.
* Various change requests.
* More various change requests.
* Added EventType for homeassistant.core.Event.
* Switched from event driven data distribution to dispatcher type plus clean-ups.
* Removed name and icon keys from the component configuration.
* Various change requests.
* Various change reqeusts and clean-ups.
* Removed unnecessary DEPENDENCIES constant from swith platform.
* Replaced configuration data guard with assert.
* Removed unused constants.
* Removed confusing type casting for mypy sake.
* Refactor property device_name to name.
* Removed None guard effecting mypy only.
* Removed unnecessary function from switch entity.
* Removed None guard in use by mypy only.
* Removed unused constant.
* Removed unnecessary context manager.
* Stopped messing around with mypy.ini.
* Referring to typing.TYPE_CHECKING for non-runtime imports.
* Added test requierment correctyly.
* Replaced queue.get() with queue.get_nowait() to avoid backing up intervals requests.
* Revert changes in mypy.ini.
* Changed attributes content to device properties instead of entity properties.
* Fixed typo in constant name.
* Remove unnecessary async keyword from callable.
* Waiting for tasks on event loop to end.
* Added callback decorator to callable.
* Fix read gps position accuracy & read device status
* Fix: W291 trailing whitespace & E501 line too long (80 > 79 characters)
* Upgrade pytraccar dependency to 0.7.0
* met snake case
* Hass.io Add-on panel support for Ingress
* Revert part of discovery startup handling
* Add type
* Fix tests
* Add tests
* Fix lint
* Fix lint on test
* Remove archived 17track packages from the entity registry
* Fix incorrect __init__.py
* Member comments
* Member comments
* Fix too many params
* Member comments
* Member comments
* Set default value for input_datetime
If no initial value is set and no value is available to be restored, set the default value as specified in the docs to 1970-01-01 00:00.
* Use regular if statement
Ternary statements can be tricky if you try to keep the value the same if not something
* Add test for default values
Check that if no initial value is set, state returns 1970-01-01 at 00:00
* Fix tests - was passing wrong args to time/date
* Verify we get a timestamp attribute for input_datetime
This adds a check that when using the default timestamp of 1970-1-1 00:00:00, we
get a timestamp attribute. This is waht prompted this PR in the first place, as
when specifying an automation trying to access the timestamp attribute for a non-
initialized input_datetime HASS wouldn't start.
* Simplify the change for a default value
Based on @balloob comment. Simplifying the code
* Revert "Simplify the change for a default value"
This reverts commit c2d67f19a6.
* update vizio component to support latest pyvizio with soundbar support
* Resolved Hound issues
* Additional Hound issue
* Updated based on feedback
* Style updates
* Additional code styling changes
* Added check for auth token not being set for tv device_class
* Limited lines to 80 characters
* moved MAX_VOLUME into base package
* fixed supported commands
* styling changes
* fix styling yet again
* remove unnecessary elif
* removed play/pause since I can't get current state
* changed value access method from config dict
* fixed flake failures
* try to fix docstring
* try to fix docstring
* fixed auth token validation
* rebase and regenerate requirements_all.txt
* updated log text
* line length fix
* added config validation to handle conditionally optional parameter
* updated validate setup log message and string formatting based on review
* fix pylint error
* less ugly
* handle the off part of on with timed off command
* use correct var
* only bind / configure cluster once
* clean up channel configuration
* additional debug logging
* add guard
* prevent multiple discoveries for a device
* cleanup and still configure on rejoin
* Skip entity if no device type found
* Add test for potentially skipped binary sensors
* Reorg code, add tests to ensure all exposed things have types
* Lint
* Fix tests
* Lint
* Add basic support for native Hue sensors
* Update coveragerc
* Simplify attributes
* Remove config option
* Refactor and document device-ness and update mechanism
* Entity docstrings
* Remove lingering config for sensors
* Whitespace
* Remove redundant entity ID generation and hass assignment.
* More meaningful variable name.
* Add new 'not-darkness' pseudo-sensor.
* Refactor sensors into separate binary, non-binary, and shared modules.
* formatting
* make linter happy.
* Refactor again, fix update mechanism, and address comments.
* Remove unnecessary assignment
* Small fixes.
* docstring
* Another refactor: only call API once and make testing easier
* Tests & test fixes
* Flake & lint
* Use gather and dispatcher
* Remove unnecessary whitespace change.
* Move component related stuff out of the shared module
* Remove unused remnant of failed approach.
* Increase test coverage
* Don't get too upset if we're already trying to update an entity before it has finished adding
* relative imports
* Kill bluetooth LE scanning gracefully when asked to shut down.
* Add missing argument.
* Refactor to use data instead of passing nonlocal variables about.
* Fix typo.
* Pass host string instead of forcing an ip-address
Pass the configured host (https://www.home-assistant.io/components/homematic/#host) instead of always forcing an ip-address. This is required to get SSL certificate validation working.
* Remove unused 'socket' import
**Related issue (if applicable):** fixes #<home-assistant issue number goes here>
**Pull request in [home-assistant.io](https://github.com/home-assistant/home-assistant.io) with documentation (if applicable):** home-assistant/home-assistant.io#<home-assistant.io PR number goes here>
**Pull request with documentation for [home-assistant.io](https://github.com/home-assistant/home-assistant.io) (if applicable):** home-assistant/home-assistant.io#<home-assistant.io PR number goes here>
## Example entry for `configuration.yaml` (if applicable):
```yaml
@@ -18,21 +18,18 @@
- [ ] The code change is tested and works locally.
- [ ] Local tests pass with `tox`. **Your PR cannot be merged unless tests pass**
- [ ] There is no commented out code in this PR.
- [ ] I have followed the [development checklist][dev-checklist]
If user exposed functionality or configuration variables are added/changed:
- [ ] Documentation added/updated in [home-assistant.io](https://github.com/home-assistant/home-assistant.io)
If the code communicates with devices, web services, or third-party tools:
- [ ] [_The manifest file_][manifest-docs] has all fields filled out correctly ([example][ex-manifest]).
- [ ] New dependencies have been added to `requirements` in the manifest ([example][ex-requir]).
- [ ]New dependencies are only imported inside functions that use them ([example][ex-import]).
- [ ] New or updated dependencies have been added to `requirements_all.txt` by running `script/gen_requirements_all.py`.
- [ ] New files were added to `.coveragerc`.
- [ ] [_The manifest file_][manifest-docs] has all fields filled out correctly. Update and include derived files by running `python3 -m script.hassfest`.
- [ ] New or updated dependencies have been added to `requirements_all.txt` by running `python3 -m script.gen_requirements_all`.
- [ ]Untested files have been added to `.coveragerc`.
If the code does not interact with devices:
- [ ] Tests have been added to verify that the new code works.
Home Assistant is a home automation platform running on Python 3. It is able to track and control all devices at home and offer a platform for automating control.
"single_instance_allowed":"Solo se permite una \u00fanica configuraci\u00f3n de AdGuard Home."
},
"error":{
"connection_error":"Error al conectar."
},
"step":{
"hassio_confirm":{
"description":"\u00bfDesea configurar Home Assistant para conectarse a la p\u00e1gina principal de AdGuard proporcionada por el complemento Hass.io: {addon}?",
"title":"AdGuard Home a trav\u00e9s del complemento Hass.io"
},
"user":{
"data":{
"password":"Contrase\u00f1a",
"port":"Puerto",
"ssl":"AdGuard Home utiliza un certificado SSL",
"username":"Nombre de usuario",
"verify_ssl":"AdGuard Home utiliza un certificado adecuado"
},
"description":"Configure su instancia de AdGuard Home para permitir la supervisi\u00f3n y el control."
"existing_instance_updated":"D\u00e9i bestehend Konfiguratioun ass ge\u00e4nnert.",
"single_instance_allowed":"N\u00ebmmen eng eenzeg Konfiguratioun vun AdGuard Home ass erlaabt."
},
"error":{
"connection_error":"Feeler beim verbannen."
},
"step":{
"hassio_confirm":{
"description":"W\u00ebllt dir Home Assistant konfigur\u00e9iere fir sech mam AdGuard Home ze verbannen dee vum hass.io add-on {addon} bereet gestallt g\u00ebtt?",
"title":"AdGuard Home via Hass.io add-on"
},
"user":{
"data":{
"host":"Apparat",
"password":"Passwuert",
"port":"Port",
"ssl":"AdGuard Home benotzt een SSL Zertifikat",
"username":"Benotzernumm",
"verify_ssl":"AdGuard Home benotzt een eegenen Zertifikat"
},
"description":"Konfigur\u00e9iert \u00e4r AdGuard Home Instanz fir d'Iwwerwaachung an d'Kontroll z'erlaben.",
"ssl":"AdGuard Home \u0438\u0441\u043f\u043e\u043b\u044c\u0437\u0443\u0435\u0442 \u0441\u0435\u0440\u0442\u0438\u0444\u0438\u043a\u0430\u0442 SSL",
"username":"\u041b\u043e\u0433\u0438\u043d",
"verify_ssl":"AdGuard Home \u0438\u0441\u043f\u043e\u043b\u044c\u0437\u0443\u0435\u0442 \u0441\u043e\u0431\u0441\u0442\u0432\u0435\u043d\u043d\u044b\u0439 \u0441\u0435\u0440\u0442\u0438\u0444\u0438\u043a\u0430\u0442"
"access_token":"S'ha produ\u00eft un error desconegut al generat un testimoni d'acc\u00e9s.",
"already_setup":"El compte d\u2019Ambi Climate est\u00e0 configurat.",
"no_config":"Necessites configurar Ambi Climate abans de poder autenticar-t'hi. Llegeix les [instruccions](https://www.home-assistant.io/components/ambiclimate/)."
},
"create_entry":{
"default":"Autenticaci\u00f3 exitosa amb Ambi Climate."
},
"error":{
"follow_link":"V\u00e9s a l'enlla\u00e7 i autentica't abans de pr\u00e9mer Envia",
"no_token":"No autenticat amb Ambi Climate"
},
"step":{
"auth":{
"description":"V\u00e9s a l'[enlla\u00e7]({authorization_url}) i <b>Permet</b> l'acc\u00e9s al teu compte de Ambi Climate, despr\u00e9s torna i prem <b>Envia</b> (a sota).\n(Assegura't que l'enlla\u00e7 de retorn \u00e9s el seg\u00fcent {cb_url})",
"follow_link":"N\u00e1sledujte odkaz a prove\u010fte ov\u011b\u0159en\u00ed p\u0159ed stisknut\u00edm tla\u010d\u00edtka Odeslat.",
"no_token":"Nen\u00ed ov\u011b\u0159en s Ambiclimate"
},
"step":{
"auth":{
"description":"N\u00e1sledujte tento [odkaz]({authorization_url}) a <b> Povolit </b> p\u0159\u00edstup k va\u0161emu \u00fa\u010dtu Ambiclimate, pot\u00e9 se vra\u0165te a stiskn\u011bte <b> Odeslat </b> n\u00ed\u017ee. \n (Ujist\u011bte se, \u017ee zadan\u00e1 adresa URL zp\u011btn\u00e9ho vol\u00e1n\u00ed je {cb_url} )",
"access_token":"Unbekannter Fehler beim Generieren eines Zugriffstokens.",
"already_setup":"Das Ambiclimate Konto ist konfiguriert.",
"no_config":"Ambiclimate muss konfiguriert sein, bevor die Authentifizierund durchgef\u00fchrt werden kann. [Bitte lies die Anleitung] (https://www.home-assistant.io/components/ambiclimate/)."
},
"create_entry":{
"default":"Erfolgreiche Authentifizierung mit Ambiclimate"
},
"error":{
"follow_link":"Bitte folge dem Link und authentifizieren dich, bevor du auf Senden klickst",
"no_token":"Nicht authentifiziert mit Ambiclimate"
},
"step":{
"auth":{
"description":"Bitte folge diesem [link] ({authorization_url}) und <b> Erlaube </b> Zugriff auf dein Ambiclimate-Konto, komme dann zur\u00fcck und dr\u00fccke <b> Senden </b> darunter.\n (Pr\u00fcfe, dass die Callback-URL {cb_url} ist.)",
"access_token":"Unknown error generating an access token.",
"already_setup":"The Ambiclimate account is configured.",
"no_config":"You need to configure Ambiclimate before being able to authenticate with it. [Please read the instructions](https://www.home-assistant.io/components/ambiclimate/)."
},
"create_entry":{
"default":"Successfully authenticated with Ambiclimate"
},
"error":{
"follow_link":"Please follow the link and authenticate before pressing Submit",
"no_token":"Not authenticated with Ambiclimate"
},
"step":{
"auth":{
"description":"Please follow this [link]({authorization_url}) and <b>Allow</b> access to your Ambiclimate account, then come back and press <b>Submit</b> below.\n(Make sure the specified callback url is {cb_url})",
"access_token":"Error desconocido al generar un token de acceso.",
"already_setup":"La cuenta de Ambiclimate est\u00e1 configurada.",
"no_config":"Es necesario configurar Ambiclimate antes de poder autenticarse con \u00e9l. Por favor, lea las instrucciones](https://www.home-assistant.io/components/ambiclimate/)."
},
"create_entry":{
"default":"Autenticaci\u00f3n exitosa con Ambiclimate"
"access_token":"Error desconocido al generar un token de acceso.",
"already_setup":"La cuenta de Ambiclimate est\u00e1 configurada.",
"no_config":"Es necesario configurar Ambiclimate antes de poder autenticarse con \u00e9l. [Por favor, lee las instrucciones](https://www.home-assistant.io/components/ambiclimate/)."
},
"create_entry":{
"default":"Autenticado correctamente con Ambiclimate"
},
"error":{
"follow_link":"Accede al enlace e identif\u00edcate antes de pulsar Enviar.",
"no_token":"No autenticado con Ambiclimate"
},
"step":{
"auth":{
"description":"Accede al siguiente [enlace]({authorization_url}) y <b>permite</b> el acceso a tu cuenta de Ambiclimate, despu\u00e9s vuelve y pulsa en <b>enviar</b> a continuaci\u00f3n.\n(Aseg\u00farate que la url de devoluci\u00f3n de llamada es {cb_url})",
"access_token":"Erreur inconnue lors de la g\u00e9n\u00e9ration d'un jeton d'acc\u00e8s.",
"already_setup":"Le compte Ambiclimate est configur\u00e9.",
"no_config":"Vous devez configurer Ambiclimate avant de pouvoir vous authentifier aupr\u00e8s de celui-ci. [Veuillez lire les instructions] (https://www.home-assistant.io/components/ambiclimate/)."
},
"create_entry":{
"default":"Authentifi\u00e9 avec succ\u00e8s avec Ambiclimate"
},
"error":{
"follow_link":"Veuillez suivre le lien et vous authentifier avant d'appuyer sur Soumettre.",
"no_token":"Non authentifi\u00e9 avec Ambiclimate"
},
"step":{
"auth":{
"description":"Suivez ce [lien] ( {authorization_url} ) et <b> Autorisez </b> l'acc\u00e8s \u00e0 votre compte Ambiclimate, puis revenez et appuyez sur <b> Envoyer </b> ci-dessous. \n (Assurez-vous que l'URL de rappel sp\u00e9cifi\u00e9 est {cb_url} )",
"default":"Erfollegr\u00e4ich mat Ambiclimate authentifiz\u00e9iert."
},
"error":{
"follow_link":"Follegt w.e.g. dem Link an authentifiz\u00e9iert de Kont ier dir op ofsch\u00e9cken dr\u00e9ckt.",
"no_token":"Net mat Ambiclimate authentifiz\u00e9iert"
},
"step":{
"auth":{
"description":"Follegt d\u00ebsem [Link]({authorization_url}) an <b>erlaabtt</b> den Acc\u00e8s zu \u00e4rem Ambiclimate Kont , a kommt dann zer\u00e9ck heihin an dr\u00e9ck op <b>ofsch\u00e9cken</b> hei \u00ebnnen.\n(Stellt s\u00e9cher dass den Type vun Callback {cb_url} ass.)",
"access_token":"Onbekende fout bij het genereren van een toegangstoken.",
"already_setup":"Het Ambiclimate-account is geconfigureerd.",
"no_config":"U moet Ambiclimate configureren voordat u zich ermee kunt authenticeren. (Lees de instructies) (https://www.home-assistant.io/components/ambiclimate/)."
},
"create_entry":{
"default":"Succesvol geverifieerd met Ambiclimate"
},
"error":{
"follow_link":"Gelieve de link te volgen en te verifi\u00ebren voordat u op Verzenden drukt.",
"no_token":"Niet geverifieerd met Ambiclimate"
},
"step":{
"auth":{
"description":"Volg deze [link] ( {authorization_url} ) en <b> Toestaan </b> toegang tot uw Ambiclimate-account, kom dan terug en druk hieronder op <b> Verzenden </b> . \n (Zorg ervoor dat de opgegeven callback-URL {cb_url} )",
"access_token":"Ukjent feil ved oppretting av tilgangstoken.",
"already_setup":"Ambiclimate-kontoen er konfigurert.",
"no_config":"Du m\u00e5 konfigurere Ambiclimate f\u00f8r du kan autentisere med den. [Vennligst les instruksjonene](https://www.home-assistant.io/components/ambiclimate/)."
},
"create_entry":{
"default":"Vellykket autentisering med Ambiclimate"
},
"error":{
"follow_link":"Vennligst f\u00f8lg lenken og godkjen f\u00f8r du trykker p\u00e5 Send",
"no_token":"Ikke autentisert med Ambiclimate"
},
"step":{
"auth":{
"description":"Vennligst f\u00f8lg denne [linken]({authorization_url}) og <b>Tillat</b> tilgang til din Ambiclimate konto, og kom s\u00e5 tilbake og trykk <b>Send</b> nedenfor.\n(Kontroller at den angitte URL-adressen for tilbakeringing er {cb_url})",
"access_token":"Nieznany b\u0142\u0105d podczas generowania tokena dost\u0119pu.",
"already_setup":"Konto Ambiclimate jest skonfigurowane.",
"no_config":"Musisz skonfigurowa\u0107 Ambiclimate, zanim b\u0119dziesz m\u00f3g\u0142 si\u0119 z nim uwierzytelni\u0107. [Przeczytaj instrukcj\u0119](https://www.home-assistant.io/components/ambiclimate/)."
},
"create_entry":{
"default":"Pomy\u015blnie uwierzytelniono z Ambiclimate"
},
"error":{
"follow_link":"Prosz\u0119 klikn\u0105\u0107 link i uwierzytelni\u0107 przed naci\u015bni\u0119ciem przycisku Prze\u015blij",
"no_token":"Nie uwierzytelniony z Ambiclimate"
},
"step":{
"auth":{
"description":"Kliknij poni\u017cszy [link]({authorization_url}) i <b>Zezw\u00f3l</b> na dost\u0119p do swojego konta Ambiclimate, a nast\u0119pnie wr\u00f3\u0107 i naci\u015bnij <b>Prze\u015blij</b> poni\u017cej. \n(Upewnij si\u0119, \u017ce podany adres URL to {cb_url})",
"access_token":"Erro desconhecido ao gerar um token de acesso.",
"already_setup":"A conta Ambiclimate est\u00e1 configurada.",
"no_config":"Voc\u00ea precisa configurar o Ambiclimate antes de poder autenticar com ele. [Por favor, leia as instru\u00e7\u00f5es] (https://www.home-assistant.io/components/ambiclimate/)."
},
"create_entry":{
"default":"Autenticado com sucesso no Ambiclimate"
},
"error":{
"follow_link":"Por favor, siga o link e autentique-se antes de pressionar Enviar",
"no_token":"N\u00e3o autenticado com o Ambiclimate"
},
"step":{
"auth":{
"description":"Por favor, siga este [link]({authorization_url}) e <b>Permitir</b> acesso \u00e0 sua conta Ambiclimate, em seguida, volte e pressione <b>Enviar</b> abaixo. \n (Verifique se a URL de retorno de chamada especificada \u00e9 {cb_url})",
"access_token":"Neznana napaka pri ustvarjanju \u017eetona za dostop.",
"already_setup":"Ra\u010dun Ambiclimate je konfiguriran.",
"no_config":"Ambiclimat morate konfigurirati, preden lahko z njo preverjate pristnost. [Preberite navodila] (https://www.home-assistant.io/components/ambiclimate/)."
},
"create_entry":{
"default":"Uspe\u0161no overjeno z funkcijo Ambiclimate"
},
"error":{
"follow_link":"Preden pritisnete Po\u0161lji, sledite povezavi in preverite pristnost",
"no_token":"Ni overjeno z Ambiclimate"
},
"step":{
"auth":{
"description":"Sledite temu povezavi ( {authorization_url} in <b> Dovoli </b> dostopu do svojega ra\u010duna Ambiclimate, nato se vrnite in pritisnite <b> Po\u0161lji </b> spodaj. \n (Poskrbite, da je dolo\u010den url za povratni klic {cb_url} )",
"no_config":"Du m\u00e5ste konfigurera Ambiclimate innan du kan autentisera med den. [V\u00e4nligen l\u00e4s instruktionerna] (https://www.home-assistant.io/components/ambiclimate/)."
},
"create_entry":{
"default":"Lyckad autentisering med Ambiclimate"
},
"error":{
"follow_link":"V\u00e4nligen f\u00f6lj l\u00e4nken och autentisera dig innan du trycker p\u00e5 Skicka",
"no_token":"Inte autentiserad med Ambiclimate"
},
"step":{
"auth":{
"description":"V\u00e4nligen f\u00f6lj denna [l\u00e4nk] ({authorization_url}) och <b> till\u00e5ta </b> till g\u00e5ng till ditt Ambiclimate konto, kom sedan tillbaka och tryck p\u00e5 <b> Skicka </b> nedan.\n(Kontrollera att den angivna callback url \u00e4r {cb_url})",
"description":"Please follow this [link]({authorization_url}) and <b>Allow</b> access to your Ambiclimate account, then come back and press <b>Submit</b> below.\n(Make sure the specified callback url is {cb_url})"
}
},
"create_entry":{
"default":"Successfully authenticated with Ambiclimate"
},
"error":{
"no_token":"Not authenticated with Ambiclimate",
"follow_link":"Please follow the link and authenticate before pressing Submit"
},
"abort":{
"already_setup":"The Ambiclimate account is configured.",
"no_config":"You need to configure Ambiclimate before being able to authenticate with it. [Please read the instructions](https://www.home-assistant.io/components/ambiclimate/).",
"access_token":"Unknown error generating an access token."
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
