Replace climate-control device with thermostat in climate translations

Co-authored-by: RaHehl <rahehl@users.noreply.github.com>
Co-authored-by: Joostlek <joostlek@outlook.com>

.github/workflows/ci.yaml

@@ -1187,6 +1187,8 @@ jobs:
       - pytest-postgres
       - pytest-mariadb
     timeout-minutes: 10
+    permissions:
+      id-token: write
     # codecov/test-results-action currently doesn't support tokenless uploads
     # therefore we can't run it on forks
     if: |
@@ -1198,8 +1200,9 @@ jobs:
         with:
           pattern: test-results-*
       - name: Upload test results to Codecov
-        uses: codecov/test-results-action@47f89e9acb64b76debcd5ea40642d25a4adced9f # v1.1.1
+        uses: codecov/codecov-action@671740ac38dd9b0130fbe1cec585b89eea48d3de # v5.5.2
         with:
+          report_type: test_results
           fail_ci_if_error: true
           verbose: true
-          token: ${{ secrets.CODECOV_TOKEN }}
+          use_oidc: true

.pre-commit-config.yaml

@@ -1,6 +1,6 @@
 repos:
   - repo: https://github.com/astral-sh/ruff-pre-commit
-    rev: v0.13.0
+    rev: v0.14.13
     hooks:
       - id: ruff-check
         args:

homeassistant/components/alarm_control_panel/strings.json

@@ -14,7 +14,7 @@
           "name": "[%key:component::alarm_control_panel::common::condition_behavior_name%]"
         }
       },
-      "name": "If an alarm is armed"
+      "name": "Alarm is armed"
     },
     "is_armed_away": {
       "description": "Tests if one or more alarms are armed in away mode.",
@@ -24,7 +24,7 @@
           "name": "[%key:component::alarm_control_panel::common::condition_behavior_name%]"
         }
       },
-      "name": "If an alarm is armed away"
+      "name": "Alarm is armed away"
     },
     "is_armed_home": {
       "description": "Tests if one or more alarms are armed in home mode.",
@@ -34,7 +34,7 @@
           "name": "[%key:component::alarm_control_panel::common::condition_behavior_name%]"
         }
       },
-      "name": "If an alarm is armed home"
+      "name": "Alarm is armed home"
     },
     "is_armed_night": {
       "description": "Tests if one or more alarms are armed in night mode.",
@@ -44,7 +44,7 @@
           "name": "[%key:component::alarm_control_panel::common::condition_behavior_name%]"
         }
       },
-      "name": "If an alarm is armed night"
+      "name": "Alarm is armed night"
     },
     "is_armed_vacation": {
       "description": "Tests if one or more alarms are armed in vacation mode.",
@@ -54,7 +54,7 @@
           "name": "[%key:component::alarm_control_panel::common::condition_behavior_name%]"
         }
       },
-      "name": "If an alarm is armed vacation"
+      "name": "Alarm is armed vacation"
     },
     "is_disarmed": {
       "description": "Tests if one or more alarms are disarmed.",
@@ -64,7 +64,7 @@
           "name": "[%key:component::alarm_control_panel::common::condition_behavior_name%]"
         }
       },
-      "name": "If an alarm is disarmed"
+      "name": "Alarm is disarmed"
     },
     "is_triggered": {
       "description": "Tests if one or more alarms are triggered.",
@@ -74,7 +74,7 @@
           "name": "[%key:component::alarm_control_panel::common::condition_behavior_name%]"
         }
       },
-      "name": "If an alarm is triggered"
+      "name": "Alarm is triggered"
     }
   },
   "device_automation": {

homeassistant/components/apple_tv/__init__.py

@@ -5,9 +5,14 @@ from __future__ import annotations
 import asyncio
 import logging
 from random import randrange
-import sys
 from typing import Any, cast
 
+from pyatv import connect, exceptions, scan
+from pyatv.conf import AppleTV
+from pyatv.const import DeviceModel, Protocol
+from pyatv.convert import model_str
+from pyatv.interface import AppleTV as AppleTVInterface, DeviceListener
+
 from homeassistant.components import zeroconf
 from homeassistant.config_entries import ConfigEntry
 from homeassistant.const import (
@@ -24,11 +29,7 @@ from homeassistant.const import (
     Platform,
 )
 from homeassistant.core import Event, HomeAssistant, callback
-from homeassistant.exceptions import (
-    ConfigEntryAuthFailed,
-    ConfigEntryNotReady,
-    HomeAssistantError,
-)
+from homeassistant.exceptions import ConfigEntryAuthFailed, ConfigEntryNotReady
 from homeassistant.helpers import device_registry as dr
 from homeassistant.helpers.aiohttp_client import async_get_clientsession
 from homeassistant.helpers.dispatcher import async_dispatcher_send
@@ -42,18 +43,6 @@ from .const import (
     SIGNAL_DISCONNECTED,
 )
 
-if sys.version_info < (3, 14):
-    from pyatv import connect, exceptions, scan
-    from pyatv.conf import AppleTV
-    from pyatv.const import DeviceModel, Protocol
-    from pyatv.convert import model_str
-    from pyatv.interface import AppleTV as AppleTVInterface, DeviceListener
-else:
-
-    class DeviceListener:
-        """Dummy class."""
-
-
 _LOGGER = logging.getLogger(__name__)
 
 DEFAULT_NAME_TV = "Apple TV"
@@ -64,30 +53,25 @@ BACKOFF_TIME_UPPER_LIMIT = 300  # Five minutes
 
 PLATFORMS = [Platform.MEDIA_PLAYER, Platform.REMOTE]
 
-if sys.version_info < (3, 14):
-    AUTH_EXCEPTIONS = (
-        exceptions.AuthenticationError,
-        exceptions.InvalidCredentialsError,
-        exceptions.NoCredentialsError,
-    )
-    CONNECTION_TIMEOUT_EXCEPTIONS = (
-        OSError,
-        asyncio.CancelledError,
-        TimeoutError,
-        exceptions.ConnectionLostError,
-        exceptions.ConnectionFailedError,
-    )
-    DEVICE_EXCEPTIONS = (
-        exceptions.ProtocolError,
-        exceptions.NoServiceError,
-        exceptions.PairingError,
-        exceptions.BackOffError,
-        exceptions.DeviceIdMissingError,
-    )
-else:
-    AUTH_EXCEPTIONS = ()
-    CONNECTION_TIMEOUT_EXCEPTIONS = ()
-    DEVICE_EXCEPTIONS = ()
+AUTH_EXCEPTIONS = (
+    exceptions.AuthenticationError,
+    exceptions.InvalidCredentialsError,
+    exceptions.NoCredentialsError,
+)
+CONNECTION_TIMEOUT_EXCEPTIONS = (
+    OSError,
+    asyncio.CancelledError,
+    TimeoutError,
+    exceptions.ConnectionLostError,
+    exceptions.ConnectionFailedError,
+)
+DEVICE_EXCEPTIONS = (
+    exceptions.ProtocolError,
+    exceptions.NoServiceError,
+    exceptions.PairingError,
+    exceptions.BackOffError,
+    exceptions.DeviceIdMissingError,
+)
 
 
 type AppleTvConfigEntry = ConfigEntry[AppleTVManager]
@@ -95,10 +79,6 @@ type AppleTvConfigEntry = ConfigEntry[AppleTVManager]
 
 async def async_setup_entry(hass: HomeAssistant, entry: AppleTvConfigEntry) -> bool:
     """Set up a config entry for Apple TV."""
-    if sys.version_info >= (3, 14):
-        raise HomeAssistantError(
-            "Apple TV is not supported on Python 3.14. Please use Python 3.13."
-        )
     manager = AppleTVManager(hass, entry)
 
     if manager.is_on:

homeassistant/components/apple_tv/manifest.json

@@ -8,7 +8,7 @@
   "integration_type": "device",
   "iot_class": "local_push",
   "loggers": ["pyatv", "srptools"],
-  "requirements": ["pyatv==0.16.1;python_version<'3.14'"],
+  "requirements": ["pyatv==0.17.0"],
   "zeroconf": [
     "_mediaremotetv._tcp.local.",
     "_companion-link._tcp.local.",

homeassistant/components/apple_tv/media_player.py

@@ -239,6 +239,15 @@ class AppleTvMediaPlayer(
         """
         self.async_write_ha_state()
 
+    @callback
+    def volume_device_update(
+        self, output_device: OutputDevice, old_level: float, new_level: float
+    ) -> None:
+        """Output device volume was updated.
+
+        This is a callback function from pyatv.interface.AudioListener.
+        """
+
     @callback
     def outputdevices_update(
         self, old_devices: list[OutputDevice], new_devices: list[OutputDevice]

homeassistant/components/arve/__init__.py

@@ -2,14 +2,35 @@
 
 from __future__ import annotations
 
+import logging
+
 from homeassistant.const import Platform
 from homeassistant.core import HomeAssistant
 
 from .coordinator import ArveConfigEntry, ArveCoordinator
 
+_LOGGER = logging.getLogger(__name__)
+
 PLATFORMS: list[Platform] = [Platform.SENSOR]
 
 
+async def async_migrate_entry(hass: HomeAssistant, entry: ArveConfigEntry) -> bool:
+    """Migrate entry."""
+    _LOGGER.debug("Migrating from version %s.%s", entry.version, entry.minor_version)
+
+    if entry.version == 1:
+        # 1 -> 1.2: Unique ID from integer to string
+        if entry.minor_version == 1:
+            minor_version = 2
+            hass.config_entries.async_update_entry(
+                entry, unique_id=str(entry.unique_id), minor_version=minor_version
+            )
+
+    _LOGGER.debug("Migration successful")
+
+    return True
+
+
 async def async_setup_entry(hass: HomeAssistant, entry: ArveConfigEntry) -> bool:
     """Set up Arve from a config entry."""
 

homeassistant/components/arve/config_flow.py

@@ -19,6 +19,9 @@ _LOGGER = logging.getLogger(__name__)
 class ArveConfigFlowHandler(ConfigFlow, domain=DOMAIN):
     """Handle a config flow for Arve."""
 
+    VERSION = 1
+    MINOR_VERSION = 2
+
     async def async_step_user(
         self, user_input: dict[str, Any] | None = None
     ) -> ConfigFlowResult:
@@ -35,7 +38,7 @@ class ArveConfigFlowHandler(ConfigFlow, domain=DOMAIN):
             except ArveConnectionError:
                 errors["base"] = "cannot_connect"
             else:
-                await self.async_set_unique_id(customer.customerId)
+                await self.async_set_unique_id(str(customer.customerId))
                 self._abort_if_unique_id_configured()
                 return self.async_create_entry(
                     title="Arve",

homeassistant/components/assist_satellite/strings.json

@@ -14,7 +14,7 @@
           "name": "[%key:component::assist_satellite::common::condition_behavior_name%]"
         }
       },
-      "name": "If a satellite is idle"
+      "name": "Satellite is idle"
     },
     "is_listening": {
       "description": "Tests if one or more Assist satellites are listening.",
@@ -24,7 +24,7 @@
           "name": "[%key:component::assist_satellite::common::condition_behavior_name%]"
         }
       },
-      "name": "If a satellite is listening"
+      "name": "Satellite is listening"
     },
     "is_processing": {
       "description": "Tests if one or more Assist satellites are processing.",
@@ -34,7 +34,7 @@
           "name": "[%key:component::assist_satellite::common::condition_behavior_name%]"
         }
       },
-      "name": "If a satellite is processing"
+      "name": "Satellite is processing"
     },
     "is_responding": {
       "description": "Tests if one or more Assist satellites are responding.",
@@ -44,7 +44,7 @@
           "name": "[%key:component::assist_satellite::common::condition_behavior_name%]"
         }
       },
-      "name": "If a satellite is responding"
+      "name": "Satellite is responding"
     }
   },
   "entity_component": {

homeassistant/components/automation/__init__.py

@@ -56,7 +56,7 @@ from homeassistant.core import (
     valid_entity_id,
 )
 from homeassistant.exceptions import HomeAssistantError, ServiceNotFound, TemplateError
-from homeassistant.helpers import condition, config_validation as cv
+from homeassistant.helpers import condition as condition_helper, config_validation as cv
 from homeassistant.helpers.entity import ToggleEntity
 from homeassistant.helpers.entity_component import EntityComponent
 from homeassistant.helpers.issue_registry import (
@@ -554,7 +554,7 @@ class AutomationEntity(BaseAutomationEntity, RestoreEntity):
         automation_id: str | None,
         name: str,
         trigger_config: list[ConfigType],
-        cond_func: IfAction | None,
+        condition: IfAction | None,
         action_script: Script,
         initial_state: bool | None,
         variables: ScriptVariables | None,
@@ -567,7 +567,7 @@ class AutomationEntity(BaseAutomationEntity, RestoreEntity):
         self._attr_name = name
         self._trigger_config = trigger_config
         self._async_detach_triggers: CALLBACK_TYPE | None = None
-        self._cond_func = cond_func
+        self._condition = condition
         self.action_script = action_script
         self.action_script.change_listener = self.async_write_ha_state
         self._initial_state = initial_state
@@ -602,6 +602,12 @@ class AutomationEntity(BaseAutomationEntity, RestoreEntity):
         """Return a set of referenced labels."""
         referenced = self.action_script.referenced_labels
 
+        if self._condition is not None:
+            for conf in self._condition.config:
+                referenced |= condition_helper.async_extract_targets(
+                    conf, ATTR_LABEL_ID
+                )
+
         for conf in self._trigger_config:
             referenced |= set(_get_targets_from_trigger_config(conf, ATTR_LABEL_ID))
         return referenced
@@ -611,6 +617,12 @@ class AutomationEntity(BaseAutomationEntity, RestoreEntity):
         """Return a set of referenced floors."""
         referenced = self.action_script.referenced_floors
 
+        if self._condition is not None:
+            for conf in self._condition.config:
+                referenced |= condition_helper.async_extract_targets(
+                    conf, ATTR_FLOOR_ID
+                )
+
         for conf in self._trigger_config:
             referenced |= set(_get_targets_from_trigger_config(conf, ATTR_FLOOR_ID))
         return referenced
@@ -620,6 +632,10 @@ class AutomationEntity(BaseAutomationEntity, RestoreEntity):
         """Return a set of referenced areas."""
         referenced = self.action_script.referenced_areas
 
+        if self._condition is not None:
+            for conf in self._condition.config:
+                referenced |= condition_helper.async_extract_targets(conf, ATTR_AREA_ID)
+
         for conf in self._trigger_config:
             referenced |= set(_get_targets_from_trigger_config(conf, ATTR_AREA_ID))
         return referenced
@@ -636,9 +652,9 @@ class AutomationEntity(BaseAutomationEntity, RestoreEntity):
         """Return a set of referenced devices."""
         referenced = self.action_script.referenced_devices
 
-        if self._cond_func is not None:
-            for conf in self._cond_func.config:
-                referenced |= condition.async_extract_devices(conf)
+        if self._condition is not None:
+            for conf in self._condition.config:
+                referenced |= condition_helper.async_extract_devices(conf)
 
         for conf in self._trigger_config:
             referenced |= set(_trigger_extract_devices(conf))
@@ -650,9 +666,9 @@ class AutomationEntity(BaseAutomationEntity, RestoreEntity):
         """Return a set of referenced entities."""
         referenced = self.action_script.referenced_entities
 
-        if self._cond_func is not None:
-            for conf in self._cond_func.config:
-                referenced |= condition.async_extract_entities(conf)
+        if self._condition is not None:
+            for conf in self._condition.config:
+                referenced |= condition_helper.async_extract_entities(conf)
 
         for conf in self._trigger_config:
             for entity_id in _trigger_extract_entities(conf):
@@ -772,8 +788,8 @@ class AutomationEntity(BaseAutomationEntity, RestoreEntity):
 
             if (
                 not skip_condition
-                and self._cond_func is not None
-                and not self._cond_func(variables)
+                and self._condition is not None
+                and not self._condition(variables)
             ):
                 self._logger.debug(
                     "Conditions not met, aborting automation. Condition summary: %s",
@@ -1035,12 +1051,12 @@ async def _create_automation_entities(
         )
 
         if CONF_CONDITIONS in config_block:
-            cond_func = await _async_process_if(hass, name, config_block)
+            condition = await _async_process_if(hass, name, config_block)
 
-            if cond_func is None:
+            if condition is None:
                 continue
         else:
-            cond_func = None
+            condition = None
 
         # Add trigger variables to variables
         variables = None
@@ -1058,7 +1074,7 @@ async def _create_automation_entities(
             automation_id,
             name,
             config_block[CONF_TRIGGERS],
-            cond_func,
+            condition,
             action_script,
             initial_state,
             variables,
@@ -1200,7 +1216,7 @@ async def _async_process_if(
     if_configs = config[CONF_CONDITIONS]
 
     try:
-        if_action = await condition.async_conditions_from_config(
+        if_action = await condition_helper.async_conditions_from_config(
             hass, if_configs, LOGGER, name
         )
     except HomeAssistantError as ex:

homeassistant/components/climate/strings.json

@@ -1,6 +1,6 @@
 {
   "common": {
-    "trigger_behavior_description": "The behavior of the targeted climates to trigger on.",
+    "trigger_behavior_description": "The behavior of the targeted thermostats to trigger on.",
     "trigger_behavior_name": "Behavior"
   },
   "device_automation": {
@@ -298,22 +298,22 @@
       "name": "Set target temperature"
     },
     "toggle": {
-      "description": "Toggles climate device, from on to off, or off to on.",
+      "description": "Toggles thermostat, from on to off, or off to on.",
       "name": "[%key:common::action::toggle%]"
     },
     "turn_off": {
-      "description": "Turns climate device off.",
+      "description": "Turns thermostat off.",
       "name": "[%key:common::action::turn_off%]"
     },
     "turn_on": {
-      "description": "Turns climate device on.",
+      "description": "Turns thermostat on.",
       "name": "[%key:common::action::turn_on%]"
     }
   },
   "title": "Climate",
   "triggers": {
     "current_humidity_changed": {
-      "description": "Triggers after the humidity measured by one or more climate-control devices changes.",
+      "description": "Triggers after the humidity measured by one or more thermostats changes.",
       "fields": {
         "above": {
           "description": "Trigger when the humidity is above this value.",
@@ -324,10 +324,10 @@
           "name": "Below"
         }
       },
-      "name": "Climate-control device current humidity changed"
+      "name": "Thermostat current humidity changed"
     },
     "current_humidity_crossed_threshold": {
-      "description": "Triggers after the humidity measured by one or more climate-control devices crosses a threshold.",
+      "description": "Triggers after the humidity measured by one or more thermostats crosses a threshold.",
       "fields": {
         "behavior": {
           "description": "[%key:component::climate::common::trigger_behavior_description%]",
@@ -346,10 +346,10 @@
           "name": "Upper threshold"
         }
       },
-      "name": "Climate-control device current humidity crossed threshold"
+      "name": "Thermostat current humidity crossed threshold"
     },
     "current_temperature_changed": {
-      "description": "Triggers after the temperature measured by one or more climate-control devices changes.",
+      "description": "Triggers after the temperature measured by one or more thermostats changes.",
       "fields": {
         "above": {
           "description": "Trigger when the temperature is above this value.",
@@ -360,10 +360,10 @@
           "name": "Below"
         }
       },
-      "name": "Climate-control device current temperature changed"
+      "name": "Thermostat current temperature changed"
     },
     "current_temperature_crossed_threshold": {
-      "description": "Triggers after the temperature measured by one or more climate-control devices crosses a threshold.",
+      "description": "Triggers after the temperature measured by one or more thermostats crosses a threshold.",
       "fields": {
         "behavior": {
           "description": "[%key:component::climate::common::trigger_behavior_description%]",
@@ -382,10 +382,10 @@
           "name": "Upper threshold"
         }
       },
-      "name": "Climate-control device current temperature crossed threshold"
+      "name": "Thermostat current temperature crossed threshold"
     },
     "hvac_mode_changed": {
-      "description": "Triggers after the mode of one or more climate-control devices changes.",
+      "description": "Triggers after the mode of one or more thermostats changes.",
       "fields": {
         "behavior": {
           "description": "[%key:component::climate::common::trigger_behavior_description%]",
@@ -396,40 +396,40 @@
           "name": "Modes"
         }
       },
-      "name": "Climate-control device mode changed"
+      "name": "Thermostat mode changed"
     },
     "started_cooling": {
-      "description": "Triggers after one or more climate-control devices start cooling.",
+      "description": "Triggers after one or more thermostats start cooling.",
       "fields": {
         "behavior": {
           "description": "[%key:component::climate::common::trigger_behavior_description%]",
           "name": "[%key:component::climate::common::trigger_behavior_name%]"
         }
       },
-      "name": "Climate-control device started cooling"
+      "name": "Thermostat started cooling"
     },
     "started_drying": {
-      "description": "Triggers after one or more climate-control devices start drying.",
+      "description": "Triggers after one or more thermostats start drying.",
       "fields": {
         "behavior": {
           "description": "[%key:component::climate::common::trigger_behavior_description%]",
           "name": "[%key:component::climate::common::trigger_behavior_name%]"
         }
       },
-      "name": "Climate-control device started drying"
+      "name": "Thermostat started drying"
     },
     "started_heating": {
-      "description": "Triggers after one or more climate-control devices start heating.",
+      "description": "Triggers after one or more thermostats start heating.",
       "fields": {
         "behavior": {
           "description": "[%key:component::climate::common::trigger_behavior_description%]",
           "name": "[%key:component::climate::common::trigger_behavior_name%]"
         }
       },
-      "name": "Climate-control device started heating"
+      "name": "Thermostat started heating"
     },
     "target_humidity_changed": {
-      "description": "Triggers after the humidity setpoint of one or more climate-control devices changes.",
+      "description": "Triggers after the humidity setpoint of one or more thermostats changes.",
       "fields": {
         "above": {
           "description": "Trigger when the target humidity is above this value.",
@@ -440,10 +440,10 @@
           "name": "Below"
         }
       },
-      "name": "Climate-control device target humidity changed"
+      "name": "Thermostat target humidity changed"
     },
     "target_humidity_crossed_threshold": {
-      "description": "Triggers after the humidity setpoint of one or more climate-control devices crosses a threshold.",
+      "description": "Triggers after the humidity setpoint of one or more thermostats crosses a threshold.",
       "fields": {
         "behavior": {
           "description": "[%key:component::climate::common::trigger_behavior_description%]",
@@ -462,10 +462,10 @@
           "name": "Upper threshold"
         }
       },
-      "name": "Climate-control device target humidity crossed threshold"
+      "name": "Thermostat target humidity crossed threshold"
     },
     "target_temperature_changed": {
-      "description": "Triggers after the temperature setpoint of one or more climate-control devices changes.",
+      "description": "Triggers after the temperature setpoint of one or more thermostats changes.",
       "fields": {
         "above": {
           "description": "Trigger when the target temperature is above this value.",
@@ -476,10 +476,10 @@
           "name": "Below"
         }
       },
-      "name": "Climate-control device target temperature changed"
+      "name": "Thermostat target temperature changed"
     },
     "target_temperature_crossed_threshold": {
-      "description": "Triggers after the temperature setpoint of one or more climate-control devices crosses a threshold.",
+      "description": "Triggers after the temperature setpoint of one or more thermostats crosses a threshold.",
       "fields": {
         "behavior": {
           "description": "[%key:component::climate::common::trigger_behavior_description%]",
@@ -498,27 +498,27 @@
           "name": "Upper threshold"
         }
       },
-      "name": "Climate-control device target temperature crossed threshold"
+      "name": "Thermostat target temperature crossed threshold"
     },
     "turned_off": {
-      "description": "Triggers after one or more climate-control devices turn off.",
+      "description": "Triggers after one or more thermostats turn off.",
       "fields": {
         "behavior": {
           "description": "[%key:component::climate::common::trigger_behavior_description%]",
           "name": "[%key:component::climate::common::trigger_behavior_name%]"
         }
       },
-      "name": "Climate-control device turned off"
+      "name": "Thermostat turned off"
     },
     "turned_on": {
-      "description": "Triggers after one or more climate-control devices turn on, regardless of the mode.",
+      "description": "Triggers after one or more thermostats turn on, regardless of the mode.",
       "fields": {
         "behavior": {
           "description": "[%key:component::climate::common::trigger_behavior_description%]",
           "name": "[%key:component::climate::common::trigger_behavior_name%]"
         }
       },
-      "name": "Climate-control device turned on"
+      "name": "Thermostat turned on"
     }
   }
 }

homeassistant/components/fan/strings.json

@@ -14,7 +14,7 @@
           "name": "[%key:component::fan::common::condition_behavior_name%]"
         }
       },
-      "name": "If a fan is off"
+      "name": "Fan is off"
     },
     "is_on": {
       "description": "Tests if one or more fans are on.",
@@ -24,7 +24,7 @@
           "name": "[%key:component::fan::common::condition_behavior_name%]"
         }
       },
-      "name": "If a fan is on"
+      "name": "Fan is on"
     }
   },
   "device_automation": {

homeassistant/components/google_air_quality/icons.json

@@ -7,20 +7,11 @@
       "benzene": {
         "default": "mdi:molecule"
       },
-      "nitrogen_dioxide": {
-        "default": "mdi:molecule"
-      },
       "nitrogen_monoxide": {
         "default": "mdi:molecule"
       },
       "non_methane_hydrocarbons": {
         "default": "mdi:molecule"
-      },
-      "ozone": {
-        "default": "mdi:molecule"
-      },
-      "sulphur_dioxide": {
-        "default": "mdi:molecule"
       }
     }
   }

homeassistant/components/google_air_quality/manifest.json

@@ -8,5 +8,5 @@
   "iot_class": "cloud_polling",
   "loggers": ["google_air_quality_api"],
   "quality_scale": "bronze",
-  "requirements": ["google_air_quality_api==2.1.2"]
+  "requirements": ["google_air_quality_api==3.0.0"]
 }

homeassistant/components/google_air_quality/sensor.py

@@ -13,7 +13,11 @@ from homeassistant.components.sensor import (
     SensorStateClass,
 )
 from homeassistant.config_entries import ConfigSubentry
-from homeassistant.const import CONF_LATITUDE, CONF_LONGITUDE
+from homeassistant.const import (
+    CONCENTRATION_PARTS_PER_MILLION,
+    CONF_LATITUDE,
+    CONF_LONGITUDE,
+)
 from homeassistant.core import HomeAssistant
 from homeassistant.helpers.device_registry import DeviceEntryType, DeviceInfo
 from homeassistant.helpers.entity_platform import AddConfigEntryEntitiesCallback
@@ -114,6 +118,7 @@ AIR_QUALITY_SENSOR_TYPES: tuple[AirQualitySensorEntityDescription, ...] = (
         native_unit_of_measurement_fn=lambda x: x.pollutants.co.concentration.units,
         exists_fn=lambda x: "co" in {p.code for p in x.pollutants},
         value_fn=lambda x: x.pollutants.co.concentration.value,
+        suggested_unit_of_measurement=CONCENTRATION_PARTS_PER_MILLION,
     ),
     AirQualitySensorEntityDescription(
         key="nh3",
@@ -141,16 +146,16 @@ AIR_QUALITY_SENSOR_TYPES: tuple[AirQualitySensorEntityDescription, ...] = (
     ),
     AirQualitySensorEntityDescription(
         key="no2",
-        translation_key="nitrogen_dioxide",
         state_class=SensorStateClass.MEASUREMENT,
+        device_class=SensorDeviceClass.NITROGEN_DIOXIDE,
         native_unit_of_measurement_fn=lambda x: x.pollutants.no2.concentration.units,
         exists_fn=lambda x: "no2" in {p.code for p in x.pollutants},
         value_fn=lambda x: x.pollutants.no2.concentration.value,
     ),
     AirQualitySensorEntityDescription(
         key="o3",
-        translation_key="ozone",
         state_class=SensorStateClass.MEASUREMENT,
+        device_class=SensorDeviceClass.OZONE,
         native_unit_of_measurement_fn=lambda x: x.pollutants.o3.concentration.units,
         exists_fn=lambda x: "o3" in {p.code for p in x.pollutants},
         value_fn=lambda x: x.pollutants.o3.concentration.value,
@@ -173,8 +178,8 @@ AIR_QUALITY_SENSOR_TYPES: tuple[AirQualitySensorEntityDescription, ...] = (
     ),
     AirQualitySensorEntityDescription(
         key="so2",
-        translation_key="sulphur_dioxide",
         state_class=SensorStateClass.MEASUREMENT,
+        device_class=SensorDeviceClass.SULPHUR_DIOXIDE,
         native_unit_of_measurement_fn=lambda x: x.pollutants.so2.concentration.units,
         exists_fn=lambda x: "so2" in {p.code for p in x.pollutants},
         value_fn=lambda x: x.pollutants.so2.concentration.value,

homeassistant/components/google_air_quality/strings.json

@@ -205,21 +205,12 @@
           "so2": "[%key:component::sensor::entity_component::sulphur_dioxide::name%]"
         }
       },
-      "nitrogen_dioxide": {
-        "name": "[%key:component::sensor::entity_component::nitrogen_dioxide::name%]"
-      },
       "nitrogen_monoxide": {
         "name": "[%key:component::sensor::entity_component::nitrogen_monoxide::name%]"
       },
       "non_methane_hydrocarbons": {
         "name": "Non-methane hydrocarbons"
       },
-      "ozone": {
-        "name": "[%key:component::sensor::entity_component::ozone::name%]"
-      },
-      "sulphur_dioxide": {
-        "name": "[%key:component::sensor::entity_component::sulphur_dioxide::name%]"
-      },
       "uaqi": {
         "name": "Universal Air Quality Index"
       },

homeassistant/components/habitica/strings.json

@@ -83,6 +83,9 @@
       "invalid_credentials": "Input is incomplete. You must provide either your login details or an API token",
       "unknown": "[%key:common::config_flow::error::unknown%]"
     },
+    "initiate_flow": {
+      "user": "[%key:common::config_flow::initiate_flow::account%]"
+    },
     "step": {
       "advanced": {
         "data": {

homeassistant/components/hassio/addon_panel.py

@@ -6,7 +6,7 @@ from typing import Any
 
 from aiohttp import web
 
-from homeassistant.components import frontend, panel_custom
+from homeassistant.components import frontend
 from homeassistant.components.http import HomeAssistantView
 from homeassistant.const import ATTR_ICON
 from homeassistant.core import HomeAssistant
@@ -33,7 +33,7 @@ async def async_setup_addon_panel(hass: HomeAssistant, hassio: HassIO) -> None:
         # _register_panel never suspends and is only
         # a coroutine because it would be a breaking change
         # to make it a normal function
-        await _register_panel(hass, addon, data)
+        _register_panel(hass, addon, data)
 
 
 class HassIOAddonPanel(HomeAssistantView):
@@ -58,7 +58,7 @@ class HassIOAddonPanel(HomeAssistantView):
         data = panels[addon]
 
         # Register panel
-        await _register_panel(self.hass, addon, data)
+        _register_panel(self.hass, addon, data)
         return web.Response()
 
     async def delete(self, request: web.Request, addon: str) -> web.Response:
@@ -76,18 +76,14 @@ class HassIOAddonPanel(HomeAssistantView):
         return {}
 
 
-async def _register_panel(
-    hass: HomeAssistant, addon: str, data: dict[str, Any]
-) -> None:
+def _register_panel(hass: HomeAssistant, addon: str, data: dict[str, Any]):
     """Init coroutine to register the panel."""
-    await panel_custom.async_register_panel(
+    frontend.async_register_built_in_panel(
         hass,
+        "app",
         frontend_url_path=addon,
-        webcomponent_name="hassio-main",
         sidebar_title=data[ATTR_TITLE],
         sidebar_icon=data[ATTR_ICON],
-        js_url="/api/hassio/app/entrypoint.js",
-        embed_iframe=True,
         require_admin=data[ATTR_ADMIN],
-        config={"ingress": addon},
+        config={"addon": addon},
     )

homeassistant/components/hdfury/manifest.json

@@ -7,5 +7,5 @@
   "integration_type": "device",
   "iot_class": "local_polling",
   "quality_scale": "silver",
-  "requirements": ["hdfury==1.3.1"]
+  "requirements": ["hdfury==1.4.2"]
 }

homeassistant/components/iaqualink/__init__.py

@@ -28,6 +28,7 @@ from homeassistant.helpers import device_registry as dr
 from homeassistant.helpers.dispatcher import async_dispatcher_send
 from homeassistant.helpers.event import async_track_time_interval
 from homeassistant.helpers.httpx_client import get_async_client
+from homeassistant.util.ssl import SSL_ALPN_HTTP11_HTTP2
 
 from .const import DOMAIN, UPDATE_INTERVAL
 from .entity import AqualinkEntity
@@ -66,7 +67,11 @@ async def async_setup_entry(hass: HomeAssistant, entry: AqualinkConfigEntry) ->
     username = entry.data[CONF_USERNAME]
     password = entry.data[CONF_PASSWORD]
 
-    aqualink = AqualinkClient(username, password, httpx_client=get_async_client(hass))
+    aqualink = AqualinkClient(
+        username,
+        password,
+        httpx_client=get_async_client(hass, alpn_protocols=SSL_ALPN_HTTP11_HTTP2),
+    )
     try:
         await aqualink.login()
     except AqualinkServiceException as login_exception:

homeassistant/components/iaqualink/config_flow.py

@@ -15,6 +15,7 @@ import voluptuous as vol
 from homeassistant.config_entries import ConfigFlow, ConfigFlowResult
 from homeassistant.const import CONF_PASSWORD, CONF_USERNAME
 from homeassistant.helpers.httpx_client import get_async_client
+from homeassistant.util.ssl import SSL_ALPN_HTTP11_HTTP2
 
 from .const import DOMAIN
 
@@ -36,7 +37,11 @@ class AqualinkFlowHandler(ConfigFlow, domain=DOMAIN):
 
             try:
                 async with AqualinkClient(
-                    username, password, httpx_client=get_async_client(self.hass)
+                    username,
+                    password,
+                    httpx_client=get_async_client(
+                        self.hass, alpn_protocols=SSL_ALPN_HTTP11_HTTP2
+                    ),
                 ):
                     pass
             except AqualinkServiceUnauthorizedException:

homeassistant/components/imgw_pib/manifest.json

@@ -7,5 +7,5 @@
   "integration_type": "service",
   "iot_class": "cloud_polling",
   "quality_scale": "platinum",
-  "requirements": ["imgw_pib==1.6.0"]
+  "requirements": ["imgw_pib==2.0.1"]
 }

homeassistant/components/kostal_plenticore/manifest.json

@@ -7,5 +7,5 @@
   "integration_type": "device",
   "iot_class": "local_polling",
   "loggers": ["kostal"],
-  "requirements": ["pykoplenti==1.3.0"]
+  "requirements": ["pykoplenti==1.5.0"]
 }

homeassistant/components/light/strings.json

@@ -49,7 +49,7 @@
           "name": "[%key:component::light::common::condition_behavior_name%]"
         }
       },
-      "name": "If a light is off"
+      "name": "Light is off"
     },
     "is_on": {
       "description": "Tests if one or more lights are on.",
@@ -59,7 +59,7 @@
           "name": "[%key:component::light::common::condition_behavior_name%]"
         }
       },
-      "name": "If a light is on"
+      "name": "Light is on"
     }
   },
   "device_automation": {

homeassistant/components/light/trigger.py

@@ -1,24 +1,47 @@
 """Provides triggers for lights."""
 
+from typing import Any
+
 from homeassistant.const import STATE_OFF, STATE_ON
 from homeassistant.core import HomeAssistant
 from homeassistant.helpers.trigger import (
+    EntityNumericalStateAttributeChangedTriggerBase,
+    EntityNumericalStateAttributeCrossedThresholdTriggerBase,
     Trigger,
-    make_entity_numerical_state_attribute_changed_trigger,
-    make_entity_numerical_state_attribute_crossed_threshold_trigger,
     make_entity_target_state_trigger,
 )
 
 from . import ATTR_BRIGHTNESS
 from .const import DOMAIN
 
+
+def _convert_uint8_to_percentage(value: Any) -> float:
+    """Convert a uint8 value (0-255) to a percentage (0-100)."""
+    return (float(value) / 255.0) * 100.0
+
+
+class BrightnessChangedTrigger(EntityNumericalStateAttributeChangedTriggerBase):
+    """Trigger for brightness changed."""
+
+    _domain = DOMAIN
+    _attribute = ATTR_BRIGHTNESS
+
+    _converter = staticmethod(_convert_uint8_to_percentage)
+
+
+class BrightnessCrossedThresholdTrigger(
+    EntityNumericalStateAttributeCrossedThresholdTriggerBase
+):
+    """Trigger for brightness crossed threshold."""
+
+    _domain = DOMAIN
+    _attribute = ATTR_BRIGHTNESS
+    _converter = staticmethod(_convert_uint8_to_percentage)
+
+
 TRIGGERS: dict[str, type[Trigger]] = {
-    "brightness_changed": make_entity_numerical_state_attribute_changed_trigger(
-        DOMAIN, ATTR_BRIGHTNESS
-    ),
-    "brightness_crossed_threshold": make_entity_numerical_state_attribute_crossed_threshold_trigger(
-        DOMAIN, ATTR_BRIGHTNESS
-    ),
+    "brightness_changed": BrightnessChangedTrigger,
+    "brightness_crossed_threshold": BrightnessCrossedThresholdTrigger,
     "turned_off": make_entity_target_state_trigger(DOMAIN, STATE_OFF),
     "turned_on": make_entity_target_state_trigger(DOMAIN, STATE_ON),
 }

homeassistant/components/light/triggers.yaml

@@ -22,7 +22,10 @@
         number:
           selector:
             number:
+              max: 100
+              min: 0
               mode: box
+              unit_of_measurement: "%"
         entity:
           selector:
             entity:

homeassistant/components/microbees/__init__.py

@@ -2,6 +2,7 @@
 
 from dataclasses import dataclass
 from http import HTTPStatus
+import logging
 
 import aiohttp
 from microBeesPy import MicroBees
@@ -15,6 +16,8 @@ from homeassistant.helpers import config_entry_oauth2_flow
 from .const import DOMAIN, PLATFORMS
 from .coordinator import MicroBeesUpdateCoordinator
 
+_LOGGER = logging.getLogger(__name__)
+
 
 @dataclass(frozen=True, kw_only=True)
 class HomeAssistantMicroBeesData:
@@ -25,6 +28,23 @@ class HomeAssistantMicroBeesData:
     session: config_entry_oauth2_flow.OAuth2Session
 
 
+async def async_migrate_entry(hass: HomeAssistant, entry: ConfigEntry) -> bool:
+    """Migrate entry."""
+    _LOGGER.debug("Migrating from version %s.%s", entry.version, entry.minor_version)
+
+    if entry.version == 1:
+        # 1 -> 1.2: Unique ID from integer to string
+        if entry.minor_version == 1:
+            minor_version = 2
+            hass.config_entries.async_update_entry(
+                entry, unique_id=str(entry.unique_id), minor_version=minor_version
+            )
+
+    _LOGGER.debug("Migration successful")
+
+    return True
+
+
 async def async_setup_entry(hass: HomeAssistant, entry: ConfigEntry) -> bool:
     """Set up microBees from a config entry."""
     implementation = (

homeassistant/components/microbees/config_flow.py

@@ -19,6 +19,8 @@ class OAuth2FlowHandler(
     """Handle a config flow for microBees."""
 
     DOMAIN = DOMAIN
+    VERSION = 1
+    MINOR_VERSION = 2
 
     @property
     def logger(self) -> logging.Logger:
@@ -47,7 +49,7 @@ class OAuth2FlowHandler(
             self.logger.exception("Unexpected error")
             return self.async_abort(reason="unknown")
 
-        await self.async_set_unique_id(current_user.id)
+        await self.async_set_unique_id(str(current_user.id))
         if self.source != SOURCE_REAUTH:
             self._abort_if_unique_id_configured()
             return self.async_create_entry(

homeassistant/components/monzo/__init__.py

@@ -2,6 +2,8 @@
 
 from __future__ import annotations
 
+import logging
+
 from homeassistant.config_entries import ConfigEntry
 from homeassistant.const import Platform
 from homeassistant.core import HomeAssistant
@@ -15,9 +17,28 @@ from .api import AuthenticatedMonzoAPI
 from .const import DOMAIN
 from .coordinator import MonzoCoordinator
 
+_LOGGER = logging.getLogger(__name__)
+
 PLATFORMS: list[Platform] = [Platform.SENSOR]
 
 
+async def async_migrate_entry(hass: HomeAssistant, entry: ConfigEntry) -> bool:
+    """Migrate entry."""
+    _LOGGER.debug("Migrating from version %s.%s", entry.version, entry.minor_version)
+
+    if entry.version == 1:
+        # 1 -> 1.2: Unique ID from integer to string
+        if entry.minor_version == 1:
+            minor_version = 2
+            hass.config_entries.async_update_entry(
+                entry, unique_id=str(entry.unique_id), minor_version=minor_version
+            )
+
+    _LOGGER.debug("Migration successful")
+
+    return True
+
+
 async def async_setup_entry(hass: HomeAssistant, entry: ConfigEntry) -> bool:
     """Set up Monzo from a config entry."""
     implementation = await async_get_config_entry_implementation(hass, entry)

homeassistant/components/monzo/config_flow.py

@@ -21,6 +21,8 @@ class MonzoFlowHandler(
     """Handle a config flow."""
 
     DOMAIN = DOMAIN
+    VERSION = 1
+    MINOR_VERSION = 2
 
     oauth_data: dict[str, Any]
 
@@ -51,7 +53,7 @@ class MonzoFlowHandler(
         """Create an entry for the flow."""
         self.oauth_data = data
         user_id = data[CONF_TOKEN]["user_id"]
-        await self.async_set_unique_id(user_id)
+        await self.async_set_unique_id(str(user_id))
         if self.source != SOURCE_REAUTH:
             self._abort_if_unique_id_configured()
         else:

homeassistant/components/ntfy/manifest.json

@@ -8,5 +8,5 @@
   "iot_class": "cloud_push",
   "loggers": ["aionfty"],
   "quality_scale": "platinum",
-  "requirements": ["aiontfy==0.6.1"]
+  "requirements": ["aiontfy==0.7.0"]
 }

homeassistant/components/ntfy/notify.py

@@ -43,6 +43,7 @@ ATTR_ICON = "icon"
 ATTR_MARKDOWN = "markdown"
 ATTR_PRIORITY = "priority"
 ATTR_TAGS = "tags"
+ATTR_SEQUENCE_ID = "sequence_id"
 
 SERVICE_PUBLISH_SCHEMA = cv.make_entity_service_schema(
     {
@@ -60,6 +61,7 @@ SERVICE_PUBLISH_SCHEMA = cv.make_entity_service_schema(
         vol.Optional(ATTR_EMAIL): vol.Email(),
         vol.Optional(ATTR_CALL): cv.string,
         vol.Optional(ATTR_ICON): vol.All(vol.Url(), vol.Coerce(URL)),
+        vol.Optional(ATTR_SEQUENCE_ID): cv.string,
     }
 )
 

homeassistant/components/ntfy/services.yaml

@@ -88,3 +88,8 @@ publish:
           type: url
           autocomplete: url
       example: https://example.org/logo.png
+    sequence_id:
+      required: false
+      selector:
+        text:
+      example: "Mc3otamDNcpJ"

homeassistant/components/ntfy/strings.json

@@ -1,6 +1,7 @@
 {
   "common": {
     "add_topic_description": "Set up a topic for notifications.",
+    "sequence_id": "Sequence ID",
     "topic": "Topic"
   },
   "config": {
@@ -171,6 +172,9 @@
           "icon": { "name": "Icon" },
           "message": { "name": "Message" },
           "priority": { "name": "Priority" },
+          "sequence_id": {
+            "name": "[%key:component::ntfy::common::sequence_id%]"
+          },
           "tags": { "name": "Tags" },
           "time": { "name": "Time" },
           "title": { "name": "Title" },
@@ -356,6 +360,10 @@
           "description": "All messages have a priority that defines how urgently your phone notifies you, depending on the configured vibration patterns, notification sounds, and visibility in the notification drawer or pop-over.",
           "name": "Message priority"
         },
+        "sequence_id": {
+          "description": "Enter a message or sequence ID to update an existing notification, or specify a sequence ID to reference later when updating, clearing (mark as read and dismiss), or deleting a notification.",
+          "name": "[%key:component::ntfy::common::sequence_id%]"
+        },
         "tags": {
           "description": "Add tags or emojis to the notification. Emojis (using shortcodes like smile) will appear in the notification title or message. Other tags will be displayed below the notification content.",
           "name": "Tags/Emojis"

homeassistant/components/number/const.py

@@ -247,7 +247,7 @@ class NumberDeviceClass(StrEnum):
     NITROGEN_DIOXIDE = "nitrogen_dioxide"
     """Amount of NO2.
 
-    Unit of measurement: `μg/m³`
+    Unit of measurement: `ppb` (parts per billion), `μg/m³`
     """
 
     NITROGEN_MONOXIDE = "nitrogen_monoxide"
@@ -265,7 +265,7 @@ class NumberDeviceClass(StrEnum):
     OZONE = "ozone"
     """Amount of O3.
 
-    Unit of measurement: `μg/m³`
+    Unit of measurement: `ppb` (parts per billion), `μg/m³`
     """
 
     PH = "ph"
@@ -517,10 +517,16 @@ DEVICE_CLASS_UNITS: dict[NumberDeviceClass, set[type[StrEnum] | str | None]] = {
     NumberDeviceClass.ILLUMINANCE: {LIGHT_LUX},
     NumberDeviceClass.IRRADIANCE: set(UnitOfIrradiance),
     NumberDeviceClass.MOISTURE: {PERCENTAGE},
-    NumberDeviceClass.NITROGEN_DIOXIDE: {CONCENTRATION_MICROGRAMS_PER_CUBIC_METER},
+    NumberDeviceClass.NITROGEN_DIOXIDE: {
+        CONCENTRATION_PARTS_PER_BILLION,
+        CONCENTRATION_MICROGRAMS_PER_CUBIC_METER,
+    },
     NumberDeviceClass.NITROGEN_MONOXIDE: {CONCENTRATION_MICROGRAMS_PER_CUBIC_METER},
     NumberDeviceClass.NITROUS_OXIDE: {CONCENTRATION_MICROGRAMS_PER_CUBIC_METER},
-    NumberDeviceClass.OZONE: {CONCENTRATION_MICROGRAMS_PER_CUBIC_METER},
+    NumberDeviceClass.OZONE: {
+        CONCENTRATION_PARTS_PER_BILLION,
+        CONCENTRATION_MICROGRAMS_PER_CUBIC_METER,
+    },
     NumberDeviceClass.PH: {None},
     NumberDeviceClass.PM1: {CONCENTRATION_MICROGRAMS_PER_CUBIC_METER},
     NumberDeviceClass.PM10: {CONCENTRATION_MICROGRAMS_PER_CUBIC_METER},

homeassistant/components/nyt_games/strings.json

@@ -8,6 +8,9 @@
       "invalid_auth": "[%key:common::config_flow::error::invalid_auth%]",
       "unknown": "[%key:common::config_flow::error::unknown%]"
     },
+    "initiate_flow": {
+      "user": "[%key:common::config_flow::initiate_flow::account%]"
+    },
     "step": {
       "user": {
         "data": {

homeassistant/components/onedrive/backup.py

@@ -178,6 +178,7 @@ class OneDriveBackupAgent(BackupAgent):
                 file,
                 upload_chunk_size=upload_chunk_size,
                 session=async_get_clientsession(self._hass),
+                smart_chunk_size=True,
             )
         except HashMismatchError as err:
             raise BackupAgentError(

homeassistant/components/onedrive/manifest.json

@@ -10,5 +10,5 @@
   "iot_class": "cloud_polling",
   "loggers": ["onedrive_personal_sdk"],
   "quality_scale": "platinum",
-  "requirements": ["onedrive-personal-sdk==0.1.0"]
+  "requirements": ["onedrive-personal-sdk==0.1.1"]
 }

homeassistant/components/onedrive/strings.json

@@ -25,6 +25,9 @@
       "folder_creation_error": "Failed to create folder",
       "folder_rename_error": "Failed to rename folder"
     },
+    "initiate_flow": {
+      "user": "[%key:common::config_flow::initiate_flow::account%]"
+    },
     "step": {
       "folder_name": {
         "data": {

homeassistant/components/playstation_network/strings.json

@@ -13,6 +13,9 @@
       "invalid_auth": "[%key:common::config_flow::error::invalid_auth%]",
       "unknown": "[%key:common::config_flow::error::unknown%]"
     },
+    "initiate_flow": {
+      "user": "[%key:common::config_flow::initiate_flow::account%]"
+    },
     "step": {
       "reauth_confirm": {
         "data": {

homeassistant/components/qnap_qsw/manifest.json

@@ -9,6 +9,7 @@
     }
   ],
   "documentation": "https://www.home-assistant.io/integrations/qnap_qsw",
+  "integration_type": "device",
   "iot_class": "local_polling",
   "loggers": ["aioqsw"],
   "requirements": ["aioqsw==0.4.2"]

homeassistant/components/rabbitair/manifest.json

@@ -5,6 +5,7 @@
   "codeowners": ["@rabbit-air"],
   "config_flow": true,
   "documentation": "https://www.home-assistant.io/integrations/rabbitair",
+  "integration_type": "device",
   "iot_class": "local_polling",
   "requirements": ["python-rabbitair==0.0.8"],
   "zeroconf": ["_rabbitair._udp.local."]

homeassistant/components/radiotherm/manifest.json

@@ -13,6 +13,7 @@
     }
   ],
   "documentation": "https://www.home-assistant.io/integrations/radiotherm",
+  "integration_type": "device",
   "iot_class": "local_polling",
   "loggers": ["radiotherm"],
   "requirements": ["radiotherm==2.1.0"]

homeassistant/components/rainbird/manifest.json

@@ -4,6 +4,7 @@
   "codeowners": ["@konikvranik", "@allenporter"],
   "config_flow": true,
   "documentation": "https://www.home-assistant.io/integrations/rainbird",
+  "integration_type": "hub",
   "iot_class": "local_polling",
   "loggers": ["pyrainbird"],
   "requirements": ["pyrainbird==6.0.1"]

homeassistant/components/rainforest_raven/manifest.json

@@ -5,6 +5,7 @@
   "config_flow": true,
   "dependencies": ["usb"],
   "documentation": "https://www.home-assistant.io/integrations/rainforest_raven",
+  "integration_type": "hub",
   "iot_class": "local_polling",
   "requirements": ["aioraven==0.7.1"],
   "usb": [

homeassistant/components/rapt_ble/manifest.json

@@ -15,6 +15,7 @@
   "config_flow": true,
   "dependencies": ["bluetooth_adapters"],
   "documentation": "https://www.home-assistant.io/integrations/rapt_ble",
+  "integration_type": "device",
   "iot_class": "local_push",
   "requirements": ["rapt-ble==0.1.2"]
 }

homeassistant/components/rdw/strings.json

@@ -7,6 +7,9 @@
       "cannot_connect": "[%key:common::config_flow::error::cannot_connect%]",
       "unknown_license_plate": "Unknown license plate"
     },
+    "initiate_flow": {
+      "user": "Add vehicle"
+    },
     "step": {
       "user": {
         "data": {

homeassistant/components/recorder/statistics.py

@@ -59,6 +59,8 @@ from homeassistant.util.unit_conversion import (
     InformationConverter,
     MassConverter,
     MassVolumeConcentrationConverter,
+    NitrogenDioxideConcentrationConverter,
+    OzoneConcentrationConverter,
     PowerConverter,
     PressureConverter,
     ReactiveEnergyConverter,
@@ -225,8 +227,10 @@ _PRIMARY_UNIT_CONVERTERS: list[type[BaseUnitConverter]] = [
 
 _SECONDARY_UNIT_CONVERTERS: list[type[BaseUnitConverter]] = [
     CarbonMonoxideConcentrationConverter,
-    TemperatureDeltaConverter,
+    NitrogenDioxideConcentrationConverter,
+    OzoneConcentrationConverter,
     SulphurDioxideConcentrationConverter,
+    TemperatureDeltaConverter,
 ]
 
 STATISTIC_UNIT_TO_UNIT_CONVERTER: dict[str | None, type[BaseUnitConverter]] = {

homeassistant/components/recorder/websocket_api.py

@@ -33,6 +33,8 @@ from homeassistant.util.unit_conversion import (
     InformationConverter,
     MassConverter,
     MassVolumeConcentrationConverter,
+    NitrogenDioxideConcentrationConverter,
+    OzoneConcentrationConverter,
     PowerConverter,
     PressureConverter,
     ReactiveEnergyConverter,
@@ -85,11 +87,14 @@ UNIT_SCHEMA = vol.Schema(
         vol.Optional("distance"): vol.In(DistanceConverter.VALID_UNITS),
         vol.Optional("duration"): vol.In(DurationConverter.VALID_UNITS),
         vol.Optional("electric_current"): vol.In(ElectricCurrentConverter.VALID_UNITS),
-        vol.Optional("voltage"): vol.In(ElectricPotentialConverter.VALID_UNITS),
         vol.Optional("energy"): vol.In(EnergyConverter.VALID_UNITS),
         vol.Optional("energy_distance"): vol.In(EnergyDistanceConverter.VALID_UNITS),
         vol.Optional("information"): vol.In(InformationConverter.VALID_UNITS),
         vol.Optional("mass"): vol.In(MassConverter.VALID_UNITS),
+        vol.Optional("nitrogen_dioxide"): vol.In(
+            NitrogenDioxideConcentrationConverter.VALID_UNITS
+        ),
+        vol.Optional("ozone"): vol.In(OzoneConcentrationConverter.VALID_UNITS),
         vol.Optional("power"): vol.In(PowerConverter.VALID_UNITS),
         vol.Optional("pressure"): vol.In(PressureConverter.VALID_UNITS),
         vol.Optional("reactive_energy"): vol.In(ReactiveEnergyConverter.VALID_UNITS),
@@ -103,6 +108,7 @@ UNIT_SCHEMA = vol.Schema(
             TemperatureDeltaConverter.VALID_UNITS
         ),
         vol.Optional("unitless"): vol.In(UnitlessRatioConverter.VALID_UNITS),
+        vol.Optional("voltage"): vol.In(ElectricPotentialConverter.VALID_UNITS),
         vol.Optional("volume"): vol.In(VolumeConverter.VALID_UNITS),
         vol.Optional("volume_flow_rate"): vol.In(VolumeFlowRateConverter.VALID_UNITS),
     }

homeassistant/components/refoss/manifest.json

@@ -4,6 +4,7 @@
   "codeowners": ["@ashionky"],
   "config_flow": true,
   "documentation": "https://www.home-assistant.io/integrations/refoss",
+  "integration_type": "hub",
   "iot_class": "local_polling",
   "requirements": ["refoss-ha==1.2.5"],
   "single_config_entry": true

homeassistant/components/rehlko/manifest.json

@@ -10,6 +10,7 @@
     }
   ],
   "documentation": "https://www.home-assistant.io/integrations/rehlko",
+  "integration_type": "hub",
   "iot_class": "cloud_polling",
   "loggers": ["aiokem"],
   "quality_scale": "silver",

homeassistant/components/renault/strings.json

@@ -12,6 +12,9 @@
       "invalid_credentials": "[%key:common::config_flow::error::invalid_auth%]",
       "unknown": "[%key:common::config_flow::error::unknown%]"
     },
+    "initiate_flow": {
+      "user": "[%key:common::config_flow::initiate_flow::account%]"
+    },
     "step": {
       "kamereon": {
         "data": {

homeassistant/components/renson/manifest.json

@@ -4,6 +4,7 @@
   "codeowners": ["@jimmyd-be"],
   "config_flow": true,
   "documentation": "https://www.home-assistant.io/integrations/renson",
+  "integration_type": "device",
   "iot_class": "local_polling",
   "requirements": ["renson-endura-delta==1.7.2"]
 }

homeassistant/components/rfxtrx/manifest.json

@@ -4,6 +4,7 @@
   "codeowners": ["@danielhiversen", "@elupus", "@RobBie1221"],
   "config_flow": true,
   "documentation": "https://www.home-assistant.io/integrations/rfxtrx",
+  "integration_type": "hub",
   "iot_class": "local_push",
   "loggers": ["RFXtrx"],
   "requirements": ["pyRFXtrx==0.31.1"]

homeassistant/components/rituals_perfume_genie/manifest.json

@@ -4,6 +4,7 @@
   "codeowners": ["@milanmeu", "@frenck", "@quebulm"],
   "config_flow": true,
   "documentation": "https://www.home-assistant.io/integrations/rituals_perfume_genie",
+  "integration_type": "hub",
   "iot_class": "cloud_polling",
   "loggers": ["pyrituals"],
   "requirements": ["pyrituals==0.0.7"]

homeassistant/components/romy/manifest.json

@@ -4,6 +4,7 @@
   "codeowners": ["@xeniter"],
   "config_flow": true,
   "documentation": "https://www.home-assistant.io/integrations/romy",
+  "integration_type": "device",
   "iot_class": "local_polling",
   "requirements": ["romy==0.0.10"],
   "zeroconf": ["_aicu-http._tcp.local."]

homeassistant/components/roomba/manifest.json

@@ -22,6 +22,7 @@
     }
   ],
   "documentation": "https://www.home-assistant.io/integrations/roomba",
+  "integration_type": "device",
   "iot_class": "local_push",
   "loggers": ["paho_mqtt", "roombapy"],
   "requirements": ["roombapy==1.9.0"],

homeassistant/components/roon/manifest.json

@@ -4,6 +4,7 @@
   "codeowners": ["@pavoni"],
   "config_flow": true,
   "documentation": "https://www.home-assistant.io/integrations/roon",
+  "integration_type": "hub",
   "iot_class": "local_push",
   "loggers": ["roonapi"],
   "requirements": ["roonapi==0.1.6"]

homeassistant/components/rova/manifest.json

@@ -4,6 +4,7 @@
   "codeowners": [],
   "config_flow": true,
   "documentation": "https://www.home-assistant.io/integrations/rova",
+  "integration_type": "service",
   "iot_class": "cloud_polling",
   "loggers": ["rova"],
   "requirements": ["rova==0.4.1"]

homeassistant/components/russound_rio/manifest.json

@@ -4,6 +4,7 @@
   "codeowners": ["@noahhusby"],
   "config_flow": true,
   "documentation": "https://www.home-assistant.io/integrations/russound_rio",
+  "integration_type": "hub",
   "iot_class": "local_push",
   "loggers": ["aiorussound"],
   "quality_scale": "silver",

homeassistant/components/ruuvi_gateway/manifest.json

@@ -10,6 +10,7 @@
     }
   ],
   "documentation": "https://www.home-assistant.io/integrations/ruuvi_gateway",
+  "integration_type": "device",
   "iot_class": "local_polling",
   "requirements": ["aioruuvigateway==0.1.0"]
 }

homeassistant/components/ruuvitag_ble/manifest.json

@@ -15,6 +15,7 @@
   "config_flow": true,
   "dependencies": ["bluetooth_adapters"],
   "documentation": "https://www.home-assistant.io/integrations/ruuvitag_ble",
+  "integration_type": "device",
   "iot_class": "local_push",
   "requirements": ["ruuvitag-ble==0.4.0"]
 }

homeassistant/components/rympro/manifest.json

@@ -4,6 +4,7 @@
   "codeowners": ["@OnFreund", "@elad-bar", "@maorcc"],
   "config_flow": true,
   "documentation": "https://www.home-assistant.io/integrations/rympro",
+  "integration_type": "hub",
   "iot_class": "cloud_polling",
   "requirements": ["pyrympro==0.0.9"]
 }

homeassistant/components/sabnzbd/manifest.json

@@ -4,6 +4,7 @@
   "codeowners": ["@shaiu", "@jpbede"],
   "config_flow": true,
   "documentation": "https://www.home-assistant.io/integrations/sabnzbd",
+  "integration_type": "service",
   "iot_class": "local_polling",
   "loggers": ["pysabnzbd"],
   "quality_scale": "bronze",

homeassistant/components/sanix/manifest.json

@@ -4,6 +4,7 @@
   "codeowners": ["@tomaszsluszniak"],
   "config_flow": true,
   "documentation": "https://www.home-assistant.io/integrations/sanix",
+  "integration_type": "device",
   "iot_class": "cloud_polling",
   "requirements": ["sanix==1.0.6"]
 }

homeassistant/components/schlage/manifest.json

@@ -4,6 +4,7 @@
   "codeowners": ["@dknowles2"],
   "config_flow": true,
   "documentation": "https://www.home-assistant.io/integrations/schlage",
+  "integration_type": "hub",
   "iot_class": "cloud_polling",
   "requirements": ["pyschlage==2025.9.0"]
 }

homeassistant/components/screenlogic/manifest.json

@@ -13,6 +13,7 @@
     }
   ],
   "documentation": "https://www.home-assistant.io/integrations/screenlogic",
+  "integration_type": "hub",
   "iot_class": "local_push",
   "loggers": ["screenlogicpy"],
   "requirements": ["screenlogicpy==0.10.2"]

homeassistant/components/sense/manifest.json

@@ -18,6 +18,7 @@
     }
   ],
   "documentation": "https://www.home-assistant.io/integrations/sense",
+  "integration_type": "hub",
   "iot_class": "cloud_polling",
   "loggers": ["sense_energy"],
   "requirements": ["sense-energy==0.13.8"]

homeassistant/components/sensibo/manifest.json

@@ -12,6 +12,7 @@
   "homekit": {
     "models": ["Sensibo"]
   },
+  "integration_type": "hub",
   "iot_class": "cloud_polling",
   "loggers": ["pysensibo"],
   "quality_scale": "platinum",

homeassistant/components/sensor/const.py

@@ -63,6 +63,8 @@ from homeassistant.util.unit_conversion import (
     InformationConverter,
     MassConverter,
     MassVolumeConcentrationConverter,
+    NitrogenDioxideConcentrationConverter,
+    OzoneConcentrationConverter,
     PowerConverter,
     PressureConverter,
     ReactiveEnergyConverter,
@@ -283,7 +285,7 @@ class SensorDeviceClass(StrEnum):
     NITROGEN_DIOXIDE = "nitrogen_dioxide"
     """Amount of NO2.
 
-    Unit of measurement: `μg/m³`
+    Unit of measurement: `ppb` (parts per billion), `μg/m³`
     """
 
     NITROGEN_MONOXIDE = "nitrogen_monoxide"
@@ -301,7 +303,7 @@ class SensorDeviceClass(StrEnum):
     OZONE = "ozone"
     """Amount of O3.
 
-    Unit of measurement: `μg/m³`
+    Unit of measurement: `ppb` (parts per billion),`μg/m³`
     """
 
     PH = "ph"
@@ -563,6 +565,8 @@ UNIT_CONVERTERS: dict[SensorDeviceClass | str | None, type[BaseUnitConverter]] =
     SensorDeviceClass.ENERGY_DISTANCE: EnergyDistanceConverter,
     SensorDeviceClass.ENERGY_STORAGE: EnergyConverter,
     SensorDeviceClass.GAS: VolumeConverter,
+    SensorDeviceClass.NITROGEN_DIOXIDE: NitrogenDioxideConcentrationConverter,
+    SensorDeviceClass.OZONE: OzoneConcentrationConverter,
     SensorDeviceClass.POWER: PowerConverter,
     SensorDeviceClass.POWER_FACTOR: UnitlessRatioConverter,
     SensorDeviceClass.PRECIPITATION: DistanceConverter,
@@ -631,10 +635,16 @@ DEVICE_CLASS_UNITS: dict[SensorDeviceClass, set[type[StrEnum] | str | None]] = {
     SensorDeviceClass.ILLUMINANCE: {LIGHT_LUX},
     SensorDeviceClass.IRRADIANCE: set(UnitOfIrradiance),
     SensorDeviceClass.MOISTURE: {PERCENTAGE},
-    SensorDeviceClass.NITROGEN_DIOXIDE: {CONCENTRATION_MICROGRAMS_PER_CUBIC_METER},
+    SensorDeviceClass.NITROGEN_DIOXIDE: {
+        CONCENTRATION_PARTS_PER_BILLION,
+        CONCENTRATION_MICROGRAMS_PER_CUBIC_METER,
+    },
     SensorDeviceClass.NITROGEN_MONOXIDE: {CONCENTRATION_MICROGRAMS_PER_CUBIC_METER},
     SensorDeviceClass.NITROUS_OXIDE: {CONCENTRATION_MICROGRAMS_PER_CUBIC_METER},
-    SensorDeviceClass.OZONE: {CONCENTRATION_MICROGRAMS_PER_CUBIC_METER},
+    SensorDeviceClass.OZONE: {
+        CONCENTRATION_PARTS_PER_BILLION,
+        CONCENTRATION_MICROGRAMS_PER_CUBIC_METER,
+    },
     SensorDeviceClass.PH: {None},
     SensorDeviceClass.PM1: {CONCENTRATION_MICROGRAMS_PER_CUBIC_METER},
     SensorDeviceClass.PM10: {CONCENTRATION_MICROGRAMS_PER_CUBIC_METER},

homeassistant/components/smartthings/strings.json

@@ -18,6 +18,9 @@
     "error": {
       "already_configured": "[%key:common::config_flow::abort::already_configured_account%]"
     },
+    "initiate_flow": {
+      "user": "[%key:common::config_flow::initiate_flow::account%]"
+    },
     "step": {
       "pick_implementation": {
         "data": {

homeassistant/components/template/select.py

@@ -49,8 +49,8 @@ DEFAULT_NAME = "Template Select"
 
 SELECT_COMMON_SCHEMA = vol.Schema(
     {
-        vol.Optional(ATTR_OPTIONS): cv.template,
-        vol.Optional(CONF_SELECT_OPTION): cv.SCRIPT_SCHEMA,
+        vol.Required(ATTR_OPTIONS): cv.template,
+        vol.Required(CONF_SELECT_OPTION): cv.SCRIPT_SCHEMA,
         vol.Optional(CONF_STATE): cv.template,
     }
 )

homeassistant/components/tibber/__init__.py

@@ -8,7 +8,6 @@ import logging
 import aiohttp
 from aiohttp.client_exceptions import ClientError, ClientResponseError
 import tibber
-from tibber import data_api as tibber_data_api
 
 from homeassistant.const import CONF_ACCESS_TOKEN, EVENT_HOMEASSISTANT_STOP, Platform
 from homeassistant.core import Event, HomeAssistant
@@ -23,13 +22,7 @@ from homeassistant.helpers.config_entry_oauth2_flow import (
 from homeassistant.helpers.typing import ConfigType
 from homeassistant.util import dt as dt_util, ssl as ssl_util
 
-from .const import (
-    AUTH_IMPLEMENTATION,
-    CONF_LEGACY_ACCESS_TOKEN,
-    DATA_HASS_CONFIG,
-    DOMAIN,
-    TibberConfigEntry,
-)
+from .const import AUTH_IMPLEMENTATION, DATA_HASS_CONFIG, DOMAIN, TibberConfigEntry
 from .coordinator import TibberDataAPICoordinator
 from .services import async_setup_services
 
@@ -44,24 +37,23 @@ _LOGGER = logging.getLogger(__name__)
 class TibberRuntimeData:
     """Runtime data for Tibber API entries."""
 
-    tibber_connection: tibber.Tibber
     session: OAuth2Session
     data_api_coordinator: TibberDataAPICoordinator | None = field(default=None)
-    _client: tibber_data_api.TibberDataAPI | None = None
+    _client: tibber.Tibber | None = None
 
-    async def async_get_client(
-        self, hass: HomeAssistant
-    ) -> tibber_data_api.TibberDataAPI:
-        """Return an authenticated Tibber Data API client."""
+    async def async_get_client(self, hass: HomeAssistant) -> tibber.Tibber:
+        """Return an authenticated Tibber client."""
         await self.session.async_ensure_token_valid()
         token = self.session.token
         access_token = token.get(CONF_ACCESS_TOKEN)
         if not access_token:
             raise ConfigEntryAuthFailed("Access token missing from OAuth session")
         if self._client is None:
-            self._client = tibber_data_api.TibberDataAPI(
-                access_token,
+            self._client = tibber.Tibber(
+                access_token=access_token,
                 websession=async_get_clientsession(hass),
+                time_zone=dt_util.get_default_time_zone(),
+                ssl=ssl_util.get_default_context(),
             )
         self._client.set_access_token(access_token)
         return self._client
@@ -88,32 +80,6 @@ async def async_setup_entry(hass: HomeAssistant, entry: TibberConfigEntry) -> bo
             translation_key="data_api_reauth_required",
         )
 
-    tibber_connection = tibber.Tibber(
-        access_token=entry.data[CONF_LEGACY_ACCESS_TOKEN],
-        websession=async_get_clientsession(hass),
-        time_zone=dt_util.get_default_time_zone(),
-        ssl=ssl_util.get_default_context(),
-    )
-
-    async def _close(event: Event) -> None:
-        await tibber_connection.rt_disconnect()
-
-    entry.async_on_unload(hass.bus.async_listen_once(EVENT_HOMEASSISTANT_STOP, _close))
-
-    try:
-        await tibber_connection.update_info()
-    except (
-        TimeoutError,
-        aiohttp.ClientError,
-        tibber.RetryableHttpExceptionError,
-    ) as err:
-        raise ConfigEntryNotReady("Unable to connect") from err
-    except tibber.InvalidLoginError as exp:
-        _LOGGER.error("Failed to login. %s", exp)
-        return False
-    except tibber.FatalHttpExceptionError:
-        return False
-
     try:
         implementation = await async_get_config_entry_implementation(hass, entry)
     except ImplementationUnavailableError as err:
@@ -135,10 +101,29 @@ async def async_setup_entry(hass: HomeAssistant, entry: TibberConfigEntry) -> bo
         raise ConfigEntryNotReady from err
 
     entry.runtime_data = TibberRuntimeData(
-        tibber_connection=tibber_connection,
         session=session,
     )
 
+    tibber_connection = await entry.runtime_data.async_get_client(hass)
+
+    async def _close(event: Event) -> None:
+        await tibber_connection.rt_disconnect()
+
+    entry.async_on_unload(hass.bus.async_listen_once(EVENT_HOMEASSISTANT_STOP, _close))
+
+    try:
+        await tibber_connection.update_info()
+    except (
+        TimeoutError,
+        aiohttp.ClientError,
+        tibber.RetryableHttpExceptionError,
+    ) as err:
+        raise ConfigEntryNotReady("Unable to connect") from err
+    except tibber.InvalidLoginError as err:
+        raise ConfigEntryAuthFailed("Invalid login credentials") from err
+    except tibber.FatalHttpExceptionError as err:
+        raise ConfigEntryNotReady("Fatal HTTP error from Tibber API") from err
+
     coordinator = TibberDataAPICoordinator(hass, entry)
     await coordinator.async_config_entry_first_refresh()
     entry.runtime_data.data_api_coordinator = coordinator
@@ -154,5 +139,6 @@ async def async_unload_entry(
     if unload_ok := await hass.config_entries.async_unload_platforms(
         config_entry, PLATFORMS
     ):
-        await config_entry.runtime_data.tibber_connection.rt_disconnect()
+        tibber_connection = await config_entry.runtime_data.async_get_client(hass)
+        await tibber_connection.rt_disconnect()
     return unload_ok

homeassistant/components/tibber/config_flow.py

@@ -8,21 +8,16 @@ from typing import Any
 
 import aiohttp
 import tibber
-from tibber import data_api as tibber_data_api
-import voluptuous as vol
 
-from homeassistant.config_entries import SOURCE_REAUTH, SOURCE_USER, ConfigFlowResult
+from homeassistant.config_entries import SOURCE_REAUTH, ConfigFlowResult
 from homeassistant.const import CONF_ACCESS_TOKEN, CONF_TOKEN
 from homeassistant.helpers.aiohttp_client import async_get_clientsession
 from homeassistant.helpers.config_entry_oauth2_flow import AbstractOAuth2FlowHandler
 
-from .const import CONF_LEGACY_ACCESS_TOKEN, DATA_API_DEFAULT_SCOPES, DOMAIN
+from .const import DATA_API_DEFAULT_SCOPES, DOMAIN
 
-DATA_SCHEMA = vol.Schema({vol.Required(CONF_LEGACY_ACCESS_TOKEN): str})
-ERR_TIMEOUT = "timeout"
 ERR_CLIENT = "cannot_connect"
 ERR_TOKEN = "invalid_access_token"
-TOKEN_URL = "https://developer.tibber.com/settings/access-token"
 
 _LOGGER = logging.getLogger(__name__)
 
@@ -36,8 +31,7 @@ class TibberConfigFlow(AbstractOAuth2FlowHandler, domain=DOMAIN):
     def __init__(self) -> None:
         """Initialize the config flow."""
         super().__init__()
-        self._access_token: str | None = None
-        self._title = ""
+        self._oauth_data: dict[str, Any] | None = None
 
     @property
     def logger(self) -> logging.Logger:
@@ -52,114 +46,70 @@ class TibberConfigFlow(AbstractOAuth2FlowHandler, domain=DOMAIN):
             "scope": " ".join(DATA_API_DEFAULT_SCOPES),
         }
 
-    async def async_step_user(
-        self, user_input: dict[str, Any] | None = None
-    ) -> ConfigFlowResult:
-        """Handle the initial step."""
-        if user_input is None:
-            data_schema = self.add_suggested_values_to_schema(
-                DATA_SCHEMA, {CONF_LEGACY_ACCESS_TOKEN: self._access_token or ""}
-            )
-
-            return self.async_show_form(
-                step_id=SOURCE_USER,
-                data_schema=data_schema,
-                description_placeholders={"url": TOKEN_URL},
-                errors={},
-            )
-
-        self._access_token = user_input[CONF_LEGACY_ACCESS_TOKEN].replace(" ", "")
-        tibber_connection = tibber.Tibber(
-            access_token=self._access_token,
-            websession=async_get_clientsession(self.hass),
-        )
-        self._title = tibber_connection.name or "Tibber"
-
-        errors: dict[str, str] = {}
-        try:
-            await tibber_connection.update_info()
-        except TimeoutError:
-            errors[CONF_LEGACY_ACCESS_TOKEN] = ERR_TIMEOUT
-        except tibber.InvalidLoginError:
-            errors[CONF_LEGACY_ACCESS_TOKEN] = ERR_TOKEN
-        except (
-            aiohttp.ClientError,
-            tibber.RetryableHttpExceptionError,
-            tibber.FatalHttpExceptionError,
-        ):
-            errors[CONF_LEGACY_ACCESS_TOKEN] = ERR_CLIENT
-
-        if errors:
-            data_schema = self.add_suggested_values_to_schema(
-                DATA_SCHEMA, {CONF_LEGACY_ACCESS_TOKEN: self._access_token or ""}
-            )
-
-            return self.async_show_form(
-                step_id=SOURCE_USER,
-                data_schema=data_schema,
-                description_placeholders={"url": TOKEN_URL},
-                errors=errors,
-            )
-
-        await self.async_set_unique_id(tibber_connection.user_id)
-
-        if self.source == SOURCE_REAUTH:
-            reauth_entry = self._get_reauth_entry()
-            self._abort_if_unique_id_mismatch(
-                reason="wrong_account",
-                description_placeholders={"title": reauth_entry.title},
-            )
-        else:
-            self._abort_if_unique_id_configured()
-
-        return await self.async_step_pick_implementation()
-
     async def async_step_reauth(
         self, entry_data: Mapping[str, Any]
     ) -> ConfigFlowResult:
         """Handle a reauth flow."""
-        reauth_entry = self._get_reauth_entry()
-        self._access_token = reauth_entry.data.get(CONF_LEGACY_ACCESS_TOKEN)
-        self._title = reauth_entry.title
         return await self.async_step_reauth_confirm()
 
     async def async_step_reauth_confirm(
         self, user_input: dict[str, Any] | None = None
     ) -> ConfigFlowResult:
         """Confirm reauthentication by reusing the user step."""
-        reauth_entry = self._get_reauth_entry()
-        self._access_token = reauth_entry.data.get(CONF_LEGACY_ACCESS_TOKEN)
-        self._title = reauth_entry.title
         if user_input is None:
-            return self.async_show_form(
-                step_id="reauth_confirm",
-            )
+            return self.async_show_form(step_id="reauth_confirm")
         return await self.async_step_user()
 
     async def async_oauth_create_entry(self, data: dict) -> ConfigFlowResult:
         """Finalize the OAuth flow and create the config entry."""
-        if self._access_token is None:
-            return self.async_abort(reason="missing_configuration")
+        self._oauth_data = data
+        return await self._async_validate_and_create()
 
-        data[CONF_LEGACY_ACCESS_TOKEN] = self._access_token
+    async def async_step_connection_error(
+        self, user_input: dict[str, Any] | None = None
+    ) -> ConfigFlowResult:
+        """Handle connection error retry."""
+        if user_input is not None:
+            return await self._async_validate_and_create()
+        return self.async_show_form(step_id="connection_error")
 
-        access_token = data[CONF_TOKEN][CONF_ACCESS_TOKEN]
-        data_api_client = tibber_data_api.TibberDataAPI(
-            access_token,
+    async def _async_validate_and_create(self) -> ConfigFlowResult:
+        """Validate the OAuth token and create the config entry."""
+        assert self._oauth_data is not None
+        access_token = self._oauth_data[CONF_TOKEN][CONF_ACCESS_TOKEN]
+        tibber_connection = tibber.Tibber(
+            access_token=access_token,
             websession=async_get_clientsession(self.hass),
         )
 
         try:
-            await data_api_client.get_userinfo()
-        except (aiohttp.ClientError, TimeoutError):
-            return self.async_abort(reason="cannot_connect")
+            await tibber_connection.update_info()
+        except TimeoutError:
+            return await self.async_step_connection_error()
+        except tibber.InvalidLoginError:
+            return self.async_abort(reason=ERR_TOKEN)
+        except (
+            aiohttp.ClientError,
+            tibber.RetryableHttpExceptionError,
+        ):
+            return await self.async_step_connection_error()
+        except tibber.FatalHttpExceptionError:
+            return self.async_abort(reason=ERR_CLIENT)
 
+        await self.async_set_unique_id(tibber_connection.user_id)
+
+        title = tibber_connection.name or "Tibber"
         if self.source == SOURCE_REAUTH:
             reauth_entry = self._get_reauth_entry()
+            self._abort_if_unique_id_mismatch(
+                reason="wrong_account",
+                description_placeholders={"title": reauth_entry.title},
+            )
             return self.async_update_reload_and_abort(
                 reauth_entry,
-                data=data,
-                title=self._title,
+                data=self._oauth_data,
+                title=title,
             )
 
-        return self.async_create_entry(title=self._title, data=data)
+        self._abort_if_unique_id_configured()
+        return self.async_create_entry(title=title, data=self._oauth_data)

homeassistant/components/tibber/const.py

@@ -5,7 +5,6 @@ from __future__ import annotations
 from typing import TYPE_CHECKING
 
 from homeassistant.config_entries import ConfigEntry
-from homeassistant.const import CONF_ACCESS_TOKEN
 
 if TYPE_CHECKING:
     from . import TibberRuntimeData
@@ -13,8 +12,6 @@ if TYPE_CHECKING:
 type TibberConfigEntry = ConfigEntry[TibberRuntimeData]
 
 
-CONF_LEGACY_ACCESS_TOKEN = CONF_ACCESS_TOKEN
-
 AUTH_IMPLEMENTATION = "auth_implementation"
 DATA_HASS_CONFIG = "tibber_hass_config"
 DOMAIN = "tibber"

homeassistant/components/tibber/coordinator.py

@@ -8,7 +8,7 @@ from typing import TYPE_CHECKING, cast
 
 from aiohttp.client_exceptions import ClientError
 import tibber
-from tibber.data_api import TibberDataAPI, TibberDevice
+from tibber.data_api import TibberDevice
 
 from homeassistant.components.recorder import get_instance
 from homeassistant.components.recorder.models import (
@@ -230,28 +230,26 @@ class TibberDataAPICoordinator(DataUpdateCoordinator[dict[str, TibberDevice]]):
             return device_sensors.get(sensor_id)
         return None
 
-    async def _async_get_client(self) -> TibberDataAPI:
-        """Get the Tibber Data API client with error handling."""
+    async def _async_get_client(self) -> tibber.Tibber:
+        """Get the Tibber client with error handling."""
         try:
             return await self._runtime_data.async_get_client(self.hass)
         except ConfigEntryAuthFailed:
             raise
         except (ClientError, TimeoutError, tibber.UserAgentMissingError) as err:
-            raise UpdateFailed(
-                f"Unable to create Tibber Data API client: {err}"
-            ) from err
+            raise UpdateFailed(f"Unable to create Tibber client: {err}") from err
 
     async def _async_setup(self) -> None:
         """Initial load of Tibber Data API devices."""
         client = await self._async_get_client()
-        devices = await client.get_all_devices()
+        devices = await client.data_api.get_all_devices()
         self._build_sensor_lookup(devices)
 
     async def _async_update_data(self) -> dict[str, TibberDevice]:
         """Fetch the latest device capabilities from the Tibber Data API."""
         client = await self._async_get_client()
         try:
-            devices: dict[str, TibberDevice] = await client.update_devices()
+            devices: dict[str, TibberDevice] = await client.data_api.update_devices()
         except tibber.exceptions.RateLimitExceededError as err:
             raise UpdateFailed(
                 f"Rate limit exceeded, retry after {err.retry_after} seconds",

homeassistant/components/tibber/diagnostics.py

@@ -15,6 +15,7 @@ async def async_get_config_entry_diagnostics(
     """Return diagnostics for a config entry."""
 
     runtime = config_entry.runtime_data
+    tibber_connection = await runtime.async_get_client(hass)
     result: dict[str, Any] = {
         "homes": [
             {
@@ -24,7 +25,7 @@ async def async_get_config_entry_diagnostics(
                 "last_cons_data_timestamp": home.last_cons_data_timestamp,
                 "country": home.country,
             }
-            for home in runtime.tibber_connection.get_homes(only_active=False)
+            for home in tibber_connection.get_homes(only_active=False)
         ]
     }
 

homeassistant/components/tibber/notify.py

@@ -2,6 +2,8 @@
 
 from __future__ import annotations
 
+import tibber
+
 from homeassistant.components.notify import (
     ATTR_TITLE_DEFAULT,
     NotifyEntity,
@@ -37,7 +39,9 @@ class TibberNotificationEntity(NotifyEntity):
 
     async def async_send_message(self, message: str, title: str | None = None) -> None:
         """Send a message to Tibber devices."""
-        tibber_connection = self._entry.runtime_data.tibber_connection
+        tibber_connection: tibber.Tibber = (
+            await self._entry.runtime_data.async_get_client(self.hass)
+        )
         try:
             await tibber_connection.send_notification(
                 title or ATTR_TITLE_DEFAULT, message

homeassistant/components/tibber/sensor.py

@@ -605,7 +605,7 @@ async def _async_setup_graphql_sensors(
 ) -> None:
     """Set up the Tibber sensor."""
 
-    tibber_connection = entry.runtime_data.tibber_connection
+    tibber_connection = await entry.runtime_data.async_get_client(hass)
 
     entity_registry = er.async_get(hass)
 

homeassistant/components/tibber/services.py

@@ -42,7 +42,7 @@ async def __get_prices(call: ServiceCall) -> ServiceResponse:
             translation_domain=DOMAIN,
             translation_key="no_config_entry",
         )
-    tibber_connection = entries[0].runtime_data.tibber_connection
+    tibber_connection = await entries[0].runtime_data.async_get_client(call.hass)
 
     start = __get_date(call.data.get(ATTR_START), "start")
     end = __get_date(call.data.get(ATTR_END), "end")

homeassistant/components/tibber/strings.json

@@ -2,26 +2,21 @@
   "config": {
     "abort": {
       "already_configured": "[%key:common::config_flow::abort::already_configured_service%]",
+      "cannot_connect": "[%key:common::config_flow::error::cannot_connect%]",
+      "invalid_access_token": "[%key:common::config_flow::error::invalid_access_token%]",
       "missing_configuration": "[%key:common::config_flow::abort::oauth2_missing_configuration%]",
       "missing_credentials": "[%key:common::config_flow::abort::oauth2_missing_credentials%]",
       "reauth_successful": "[%key:common::config_flow::abort::reauth_successful%]",
       "wrong_account": "The connected account does not match {title}. Sign in with the same Tibber account and try again."
     },
-    "error": {
-      "cannot_connect": "[%key:common::config_flow::error::cannot_connect%]",
-      "invalid_access_token": "[%key:common::config_flow::error::invalid_access_token%]",
-      "timeout": "[%key:common::config_flow::error::timeout_connect%]"
-    },
     "step": {
+      "connection_error": {
+        "description": "Could not connect to Tibber. Check your internet connection and try again.",
+        "title": "Connection failed"
+      },
       "reauth_confirm": {
         "description": "Reconnect your Tibber account to refresh access.",
         "title": "[%key:common::config_flow::title::reauth%]"
-      },
-      "user": {
-        "data": {
-          "access_token": "[%key:common::config_flow::data::access_token%]"
-        },
-        "description": "Enter your access token from {url}"
       }
     }
   },

homeassistant/components/toon/__init__.py

@@ -83,6 +83,14 @@ async def async_migrate_entry(hass: HomeAssistant, entry: ConfigEntry) -> bool:
         )
         return False
 
+    if entry.version == 2:
+        # 2 -> 2.2: Unique ID from integer to string
+        if entry.minor_version == 1:
+            minor_version = 2
+            hass.config_entries.async_update_entry(
+                entry, unique_id=str(entry.unique_id), minor_version=minor_version
+            )
+
     return True
 
 

homeassistant/components/toon/config_flow.py

@@ -20,6 +20,7 @@ class ToonFlowHandler(AbstractOAuth2FlowHandler, domain=DOMAIN):
 
     DOMAIN = DOMAIN
     VERSION = 2
+    MINOR_VERSION = 2
 
     agreements: list[Agreement]
     data: dict[str, Any]
@@ -92,7 +93,7 @@ class ToonFlowHandler(AbstractOAuth2FlowHandler, domain=DOMAIN):
         if self.migrate_entry:
             await self.hass.config_entries.async_remove(self.migrate_entry)
 
-        await self.async_set_unique_id(agreement.agreement_id)
+        await self.async_set_unique_id(str(agreement.agreement_id))
         self._abort_if_unique_id_configured()
 
         self.data[CONF_AGREEMENT_ID] = agreement.agreement_id

homeassistant/components/twitch/strings.json

@@ -10,6 +10,9 @@
       "unknown": "[%key:common::config_flow::error::unknown%]",
       "wrong_account": "Wrong account: Please authenticate with {username}."
     },
+    "initiate_flow": {
+      "user": "[%key:common::config_flow::initiate_flow::account%]"
+    },
     "step": {
       "reauth_confirm": {
         "description": "The Twitch integration needs to re-authenticate your account",

homeassistant/components/unifiprotect/binary_sensor.py

@@ -8,6 +8,7 @@ import dataclasses
 from uiprotect.data import (
     NVR,
     Camera,
+    Event,
     ModelType,
     MountType,
     ProtectAdoptableDeviceModel,
@@ -644,6 +645,31 @@ class ProtectEventBinarySensor(EventEntityMixin, BinarySensorEntity):
         self._attr_is_on = False
         self._attr_extra_state_attributes = {}
 
+    @callback
+    def _find_active_event_with_object_type(
+        self, device: ProtectDeviceType
+    ) -> Event | None:
+        """Find an active event containing this sensor's object type.
+
+        Fallback for issue #152133: last_smart_detect_event_ids may not update
+        immediately when a new detection type is added to an ongoing event.
+        """
+        obj_type = self.entity_description.ufp_obj_type
+        if obj_type is None or not isinstance(device, Camera):
+            return None
+
+        # Check known active event IDs from camera first (fast path)
+        for event_id in device.last_smart_detect_event_ids.values():
+            if (
+                event_id
+                and (event := self.data.api.bootstrap.events.get(event_id))
+                and event.end is None
+                and obj_type in event.smart_detect_types
+            ):
+                return event
+
+        return None
+
     @callback
     def _async_update_device_from_protect(self, device: ProtectDeviceType) -> None:
         description = self.entity_description
@@ -651,9 +677,15 @@ class ProtectEventBinarySensor(EventEntityMixin, BinarySensorEntity):
         prev_event = self._event
         prev_event_end = self._event_end
         super()._async_update_device_from_protect(device)
-        if event := description.get_event_obj(device):
+
+        event = description.get_event_obj(device)
+        if event is None:
+            # Fallback for #152133: check active events directly
+            event = self._find_active_event_with_object_type(device)
+
+        if event:
             self._event = event
-            self._event_end = event.end if event else None
+            self._event_end = event.end
 
         if not (
             event

homeassistant/components/unifiprotect/manifest.json

@@ -41,7 +41,7 @@
   "iot_class": "local_push",
   "loggers": ["uiprotect", "unifi_discovery"],
   "quality_scale": "platinum",
-  "requirements": ["uiprotect==8.1.1", "unifi-discovery==1.2.0"],
+  "requirements": ["uiprotect==10.0.1", "unifi-discovery==1.2.0"],
   "ssdp": [
     {
       "manufacturer": "Ubiquiti Networks",

homeassistant/components/withings/strings.json

@@ -21,6 +21,9 @@
     "error": {
       "already_configured": "[%key:common::config_flow::abort::already_configured_account%]"
     },
+    "initiate_flow": {
+      "user": "[%key:common::config_flow::initiate_flow::account%]"
+    },
     "step": {
       "oauth_discovery": {
         "description": "Home Assistant has found a Withings device on your network. Be aware that the setup of Withings is more complicated than many other integrations. Press **Submit** to continue setting up Withings."

homeassistant/components/xbox/strings.json

@@ -15,6 +15,9 @@
     "create_entry": {
       "default": "[%key:common::config_flow::create_entry::authenticated%]"
     },
+    "initiate_flow": {
+      "user": "[%key:common::config_flow::initiate_flow::account%]"
+    },
     "step": {
       "oauth_discovery": {
         "description": "Home Assistant has found an Xbox device on your network. Press **Submit** to continue setting up the Xbox integration.",

homeassistant/components/youtube/strings.json

@@ -17,6 +17,9 @@
       "cannot_connect": "[%key:common::config_flow::error::cannot_connect%]",
       "invalid_auth": "[%key:common::config_flow::error::invalid_auth%]"
     },
+    "initiate_flow": {
+      "user": "[%key:common::config_flow::initiate_flow::account%]"
+    },
     "step": {
       "channels": {
         "data": { "channels": "YouTube channels" },

homeassistant/generated/integrations.json

@@ -5375,7 +5375,7 @@
           "name": "QNAP"
         },
         "qnap_qsw": {
-          "integration_type": "hub",
+          "integration_type": "device",
           "config_flow": true,
           "iot_class": "local_polling",
           "name": "QNAP QSW"
@@ -5413,7 +5413,7 @@
     },
     "rabbitair": {
       "name": "Rabbit Air",
-      "integration_type": "hub",
+      "integration_type": "device",
       "config_flow": true,
       "iot_class": "local_polling"
     },
@@ -5438,7 +5438,7 @@
     },
     "radiotherm": {
       "name": "Radio Thermostat",
-      "integration_type": "hub",
+      "integration_type": "device",
       "config_flow": true,
       "iot_class": "local_polling"
     },
@@ -5473,7 +5473,7 @@
     },
     "rapt_ble": {
       "name": "RAPT Bluetooth",
-      "integration_type": "hub",
+      "integration_type": "device",
       "config_flow": true,
       "iot_class": "local_push"
     },
@@ -5571,7 +5571,7 @@
     },
     "renson": {
       "name": "Renson",
-      "integration_type": "hub",
+      "integration_type": "device",
       "config_flow": true,
       "iot_class": "local_polling"
     },
@@ -5679,13 +5679,13 @@
     },
     "romy": {
       "name": "ROMY Vacuum Cleaner",
-      "integration_type": "hub",
+      "integration_type": "device",
       "config_flow": true,
       "iot_class": "local_polling"
     },
     "roomba": {
       "name": "iRobot Roomba and Braava",
-      "integration_type": "hub",
+      "integration_type": "device",
       "config_flow": true,
       "iot_class": "local_push"
     },
@@ -5720,7 +5720,7 @@
     },
     "rova": {
       "name": "ROVA",
-      "integration_type": "hub",
+      "integration_type": "service",
       "config_flow": true,
       "iot_class": "cloud_polling"
     },
@@ -5763,13 +5763,13 @@
       "name": "Ruuvi",
       "integrations": {
         "ruuvi_gateway": {
-          "integration_type": "hub",
+          "integration_type": "device",
           "config_flow": true,
           "iot_class": "local_polling",
           "name": "Ruuvi Gateway"
         },
         "ruuvitag_ble": {
-          "integration_type": "hub",
+          "integration_type": "device",
           "config_flow": true,
           "iot_class": "local_push",
           "name": "Ruuvi BLE"
@@ -5784,7 +5784,7 @@
     },
     "sabnzbd": {
       "name": "SABnzbd",
-      "integration_type": "hub",
+      "integration_type": "service",
       "config_flow": true,
       "iot_class": "local_polling"
     },
@@ -5824,7 +5824,7 @@
     },
     "sanix": {
       "name": "Sanix",
-      "integration_type": "hub",
+      "integration_type": "device",
       "config_flow": true,
       "iot_class": "cloud_polling"
     },

homeassistant/helpers/aiohttp_client.py

@@ -370,9 +370,13 @@ def _async_get_connector(
         return connectors[connector_key]
 
     if verify_ssl:
-        ssl_context: SSLContext = ssl_util.client_context(ssl_cipher)
+        ssl_context: SSLContext = ssl_util.client_context(
+            ssl_cipher, ssl_util.SSL_ALPN_HTTP11
+        )
     else:
-        ssl_context = ssl_util.client_context_no_verify(ssl_cipher)
+        ssl_context = ssl_util.client_context_no_verify(
+            ssl_cipher, ssl_util.SSL_ALPN_HTTP11
+        )
 
     connector = HomeAssistantTCPConnector(
         family=family,

homeassistant/helpers/condition.py

@@ -17,6 +17,7 @@ from typing import (
     TYPE_CHECKING,
     Any,
     Final,
+    Literal,
     Protocol,
     TypedDict,
     Unpack,
@@ -1346,13 +1347,18 @@ def async_extract_entities(config: ConfigType | Template) -> set[str]:
         if entity_ids is not None:
             referenced.update(entity_ids)
 
+        if target_entities := _get_targets_from_condition_config(
+            config, CONF_ENTITY_ID
+        ):
+            referenced.update(target_entities)
+
     return referenced
 
 
 @callback
 def async_extract_devices(config: ConfigType | Template) -> set[str]:
     """Extract devices from a condition."""
-    referenced = set()
+    referenced: set[str] = set()
     to_process = deque([config])
 
     while to_process:
@@ -1366,15 +1372,57 @@ def async_extract_devices(config: ConfigType | Template) -> set[str]:
             to_process.extend(config["conditions"])
             continue
 
-        if condition != "device":
+        if condition == "device":
+            if (device_id := config.get(CONF_DEVICE_ID)) is not None:
+                referenced.add(device_id)
             continue
 
-        if (device_id := config.get(CONF_DEVICE_ID)) is not None:
-            referenced.add(device_id)
+        if target_devices := _get_targets_from_condition_config(config, CONF_DEVICE_ID):
+            referenced.update(target_devices)
 
     return referenced
 
 
+@callback
+def async_extract_targets(
+    config: ConfigType | Template,
+    target_type: Literal["area_id", "floor_id", "label_id"],
+) -> set[str]:
+    """Extract targets from a condition."""
+    referenced: set[str] = set()
+    to_process = deque([config])
+
+    while to_process:
+        config = to_process.popleft()
+        if isinstance(config, Template):
+            continue
+
+        condition = config[CONF_CONDITION]
+
+        if condition in ("and", "not", "or"):
+            to_process.extend(config["conditions"])
+            continue
+
+        if targets := _get_targets_from_condition_config(config, target_type):
+            referenced.update(targets)
+
+    return referenced
+
+
+@callback
+def _get_targets_from_condition_config(
+    config: ConfigType,
+    target: Literal["entity_id", "device_id", "area_id", "floor_id", "label_id"],
+) -> list[str]:
+    """Extract targets from a condition target config."""
+    if not (target_conf := config.get(CONF_TARGET)):
+        return []
+    if not (targets := target_conf.get(target)):
+        return []
+
+    return [targets] if isinstance(targets, str) else targets
+
+
 def _load_conditions_file(integration: Integration) -> dict[str, Any]:
     """Load conditions file for an integration."""
     try:

homeassistant/helpers/httpx_client.py

@@ -17,6 +17,9 @@ from homeassistant.core import Event, HomeAssistant, callback
 from homeassistant.loader import bind_hass
 from homeassistant.util.hass_dict import HassKey
 from homeassistant.util.ssl import (
+    SSL_ALPN_HTTP11,
+    SSL_ALPN_HTTP11_HTTP2,
+    SSLALPNProtocols,
     SSLCipherList,
     client_context,
     create_no_verify_ssl_context,
@@ -28,9 +31,9 @@ from .frame import warn_use
 # and we want to keep the connection open for a while so we
 # don't have to reconnect every time so we use 15s to match aiohttp.
 KEEP_ALIVE_TIMEOUT = 15
-DATA_ASYNC_CLIENT: HassKey[httpx.AsyncClient] = HassKey("httpx_async_client")
-DATA_ASYNC_CLIENT_NOVERIFY: HassKey[httpx.AsyncClient] = HassKey(
-    "httpx_async_client_noverify"
+# Shared httpx clients keyed by (verify_ssl, alpn_protocols)
+DATA_ASYNC_CLIENT: HassKey[dict[tuple[bool, SSLALPNProtocols], httpx.AsyncClient]] = (
+    HassKey("httpx_async_client")
 )
 DEFAULT_LIMITS = limits = httpx.Limits(keepalive_expiry=KEEP_ALIVE_TIMEOUT)
 SERVER_SOFTWARE = (
@@ -42,15 +45,26 @@ USER_AGENT = "User-Agent"
 
 @callback
 @bind_hass
-def get_async_client(hass: HomeAssistant, verify_ssl: bool = True) -> httpx.AsyncClient:
+def get_async_client(
+    hass: HomeAssistant,
+    verify_ssl: bool = True,
+    alpn_protocols: SSLALPNProtocols = SSL_ALPN_HTTP11,
+) -> httpx.AsyncClient:
     """Return default httpx AsyncClient.
 
     This method must be run in the event loop.
-    """
-    key = DATA_ASYNC_CLIENT if verify_ssl else DATA_ASYNC_CLIENT_NOVERIFY
 
-    if (client := hass.data.get(key)) is None:
-        client = hass.data[key] = create_async_httpx_client(hass, verify_ssl)
+    Pass alpn_protocols=SSL_ALPN_HTTP11_HTTP2 to get a client configured for HTTP/2.
+    Clients are cached separately by ALPN protocol to ensure proper SSL context
+    configuration (ALPN protocols differ between HTTP versions).
+    """
+    client_key = (verify_ssl, alpn_protocols)
+    clients = hass.data.setdefault(DATA_ASYNC_CLIENT, {})
+
+    if (client := clients.get(client_key)) is None:
+        client = clients[client_key] = create_async_httpx_client(
+            hass, verify_ssl, alpn_protocols=alpn_protocols
+        )
 
     return client
 
@@ -77,6 +91,7 @@ def create_async_httpx_client(
     verify_ssl: bool = True,
     auto_cleanup: bool = True,
     ssl_cipher_list: SSLCipherList = SSLCipherList.PYTHON_DEFAULT,
+    alpn_protocols: SSLALPNProtocols = SSL_ALPN_HTTP11,
     **kwargs: Any,
 ) -> httpx.AsyncClient:
     """Create a new httpx.AsyncClient with kwargs, i.e. for cookies.
@@ -84,13 +99,22 @@ def create_async_httpx_client(
     If auto_cleanup is False, the client will be
     automatically closed on homeassistant_stop.
 
+    Pass alpn_protocols=SSL_ALPN_HTTP11_HTTP2 for HTTP/2 support (automatically
+    enables httpx http2 mode).
+
     This method must be run in the event loop.
     """
+    # Use the requested ALPN protocols directly to ensure proper SSL context
+    # bucketing. httpx/httpcore mutates SSL contexts by calling set_alpn_protocols(),
+    # so we pre-set the correct protocols to prevent shared context corruption.
     ssl_context = (
-        client_context(ssl_cipher_list)
+        client_context(ssl_cipher_list, alpn_protocols)
         if verify_ssl
-        else create_no_verify_ssl_context(ssl_cipher_list)
+        else create_no_verify_ssl_context(ssl_cipher_list, alpn_protocols)
     )
+    # Enable httpx HTTP/2 mode when HTTP/2 protocol is requested
+    if alpn_protocols == SSL_ALPN_HTTP11_HTTP2:
+        kwargs.setdefault("http2", True)
     client = HassHttpXAsyncClient(
         verify=ssl_context,
         headers={USER_AGENT: SERVER_SOFTWARE},

homeassistant/helpers/script.py

@@ -1601,8 +1601,13 @@ class Script:
                 ):
                     _referenced_extract_ids(data, target, referenced)
 
+            elif action == cv.SCRIPT_ACTION_CHECK_CONDITION:
+                referenced |= condition.async_extract_targets(step, target)
+
             elif action == cv.SCRIPT_ACTION_CHOOSE:
                 for choice in step[CONF_CHOOSE]:
+                    for cond in choice[CONF_CONDITIONS]:
+                        referenced |= condition.async_extract_targets(cond, target)
                     Script._find_referenced_target(
                         target, referenced, choice[CONF_SEQUENCE]
                     )
@@ -1612,6 +1617,8 @@ class Script:
                     )
 
             elif action == cv.SCRIPT_ACTION_IF:
+                for cond in step[CONF_IF]:
+                    referenced |= condition.async_extract_targets(cond, target)
                 Script._find_referenced_target(target, referenced, step[CONF_THEN])
                 if CONF_ELSE in step:
                     Script._find_referenced_target(target, referenced, step[CONF_ELSE])

homeassistant/helpers/trigger.py

@@ -594,6 +594,8 @@ class EntityNumericalStateAttributeChangedTriggerBase(EntityTriggerBase):
     _above: None | float | str
     _below: None | float | str
 
+    _converter: Callable[[Any], float] = float
+
     def __init__(self, hass: HomeAssistant, config: TriggerConfig) -> None:
         """Initialize the state trigger."""
         super().__init__(hass, config)
@@ -616,7 +618,7 @@ class EntityNumericalStateAttributeChangedTriggerBase(EntityTriggerBase):
             return False
 
         try:
-            current_value = float(_attribute_value)
+            current_value = self._converter(_attribute_value)
         except (TypeError, ValueError):
             # Attribute is not a valid number, don't trigger
             return False
@@ -706,6 +708,8 @@ class EntityNumericalStateAttributeCrossedThresholdTriggerBase(EntityTriggerBase
     _upper_limit: float | str | None = None
     _threshold_type: ThresholdType
 
+    _converter: Callable[[Any], float] = float
+
     def __init__(self, hass: HomeAssistant, config: TriggerConfig) -> None:
         """Initialize the state trigger."""
         super().__init__(hass, config)
@@ -741,7 +745,7 @@ class EntityNumericalStateAttributeCrossedThresholdTriggerBase(EntityTriggerBase
             return False
 
         try:
-            current_value = float(_attribute_value)
+            current_value = self._converter(_attribute_value)
         except (TypeError, ValueError):
             # Attribute is not a valid number, don't trigger
             return False

homeassistant/util/ssl.py

@@ -8,6 +8,17 @@ import ssl
 
 import certifi
 
+# Type alias for ALPN protocols tuple (None means no ALPN protocols set)
+type SSLALPNProtocols = tuple[str, ...] | None
+
+# ALPN protocol configurations
+# No ALPN protocols - used for libraries that don't support/need ALPN (e.g., aioimap)
+SSL_ALPN_NONE: SSLALPNProtocols = None
+# HTTP/1.1 only - used by default and for aiohttp (which doesn't support HTTP/2)
+SSL_ALPN_HTTP11: SSLALPNProtocols = ("http/1.1",)
+# HTTP/1.1 with HTTP/2 support - used when httpx http2=True
+SSL_ALPN_HTTP11_HTTP2: SSLALPNProtocols = ("http/1.1", "h2")
+
 
 class SSLCipherList(StrEnum):
     """SSL cipher lists."""
@@ -64,7 +75,10 @@ SSL_CIPHER_LISTS = {
 
 
 @cache
-def _client_context_no_verify(ssl_cipher_list: SSLCipherList) -> ssl.SSLContext:
+def _client_context_no_verify(
+    ssl_cipher_list: SSLCipherList,
+    alpn_protocols: SSLALPNProtocols,
+) -> ssl.SSLContext:
     # This is a copy of aiohttp's create_default_context() function, with the
     # ssl verify turned off.
     # https://github.com/aio-libs/aiohttp/blob/33953f110e97eecc707e1402daa8d543f38a189b/aiohttp/connector.py#L911
@@ -78,12 +92,18 @@ def _client_context_no_verify(ssl_cipher_list: SSLCipherList) -> ssl.SSLContext:
     sslcontext.set_default_verify_paths()
     if ssl_cipher_list != SSLCipherList.PYTHON_DEFAULT:
         sslcontext.set_ciphers(SSL_CIPHER_LISTS[ssl_cipher_list])
+    # Set ALPN protocols to prevent downstream libraries (e.g., httpx/httpcore)
+    # from mutating the shared SSL context with different protocol settings.
+    # If alpn_protocols is None, don't set ALPN (for libraries like aioimap).
+    if alpn_protocols is not None:
+        sslcontext.set_alpn_protocols(list(alpn_protocols))
 
     return sslcontext
 
 
 def _create_client_context(
     ssl_cipher_list: SSLCipherList = SSLCipherList.PYTHON_DEFAULT,
+    alpn_protocols: SSLALPNProtocols = SSL_ALPN_NONE,
 ) -> ssl.SSLContext:
     """Return an independent SSL context for making requests."""
     # Reuse environment variable definition from requests, since it's already a
@@ -96,6 +116,11 @@ def _create_client_context(
     )
     if ssl_cipher_list != SSLCipherList.PYTHON_DEFAULT:
         sslcontext.set_ciphers(SSL_CIPHER_LISTS[ssl_cipher_list])
+    # Set ALPN protocols to prevent downstream libraries (e.g., httpx/httpcore)
+    # from mutating the shared SSL context with different protocol settings.
+    # If alpn_protocols is None, don't set ALPN (for libraries like aioimap).
+    if alpn_protocols is not None:
+        sslcontext.set_alpn_protocols(list(alpn_protocols))
 
     return sslcontext
 
@@ -103,63 +128,63 @@ def _create_client_context(
 @cache
 def _client_context(
     ssl_cipher_list: SSLCipherList = SSLCipherList.PYTHON_DEFAULT,
+    alpn_protocols: SSLALPNProtocols = SSL_ALPN_NONE,
 ) -> ssl.SSLContext:
     # Cached version of _create_client_context
-    return _create_client_context(ssl_cipher_list)
+    return _create_client_context(ssl_cipher_list, alpn_protocols)
 
 
-# Create this only once and reuse it
-_DEFAULT_SSL_CONTEXT = _client_context(SSLCipherList.PYTHON_DEFAULT)
-_DEFAULT_NO_VERIFY_SSL_CONTEXT = _client_context_no_verify(SSLCipherList.PYTHON_DEFAULT)
-_NO_VERIFY_SSL_CONTEXTS = {
-    SSLCipherList.INTERMEDIATE: _client_context_no_verify(SSLCipherList.INTERMEDIATE),
-    SSLCipherList.MODERN: _client_context_no_verify(SSLCipherList.MODERN),
-    SSLCipherList.INSECURE: _client_context_no_verify(SSLCipherList.INSECURE),
-}
-_SSL_CONTEXTS = {
-    SSLCipherList.INTERMEDIATE: _client_context(SSLCipherList.INTERMEDIATE),
-    SSLCipherList.MODERN: _client_context(SSLCipherList.MODERN),
-    SSLCipherList.INSECURE: _client_context(SSLCipherList.INSECURE),
-}
+# Pre-warm the cache for ALL SSL context configurations at module load time.
+# This is critical because creating SSL contexts loads certificates from disk,
+# which is blocking I/O that must not happen in the event loop.
+_SSL_ALPN_PROTOCOLS = (SSL_ALPN_NONE, SSL_ALPN_HTTP11, SSL_ALPN_HTTP11_HTTP2)
+for _cipher in SSLCipherList:
+    for _alpn in _SSL_ALPN_PROTOCOLS:
+        _client_context(_cipher, _alpn)
+        _client_context_no_verify(_cipher, _alpn)
 
 
 def get_default_context() -> ssl.SSLContext:
     """Return the default SSL context."""
-    return _DEFAULT_SSL_CONTEXT
+    return _client_context(SSLCipherList.PYTHON_DEFAULT, SSL_ALPN_HTTP11)
 
 
 def get_default_no_verify_context() -> ssl.SSLContext:
     """Return the default SSL context that does not verify the server certificate."""
-    return _DEFAULT_NO_VERIFY_SSL_CONTEXT
+    return _client_context_no_verify(SSLCipherList.PYTHON_DEFAULT, SSL_ALPN_HTTP11)
 
 
 def client_context_no_verify(
     ssl_cipher_list: SSLCipherList = SSLCipherList.PYTHON_DEFAULT,
+    alpn_protocols: SSLALPNProtocols = SSL_ALPN_NONE,
 ) -> ssl.SSLContext:
     """Return a SSL context with no verification with a specific ssl cipher."""
-    return _NO_VERIFY_SSL_CONTEXTS.get(ssl_cipher_list, _DEFAULT_NO_VERIFY_SSL_CONTEXT)
+    return _client_context_no_verify(ssl_cipher_list, alpn_protocols)
 
 
 def client_context(
     ssl_cipher_list: SSLCipherList = SSLCipherList.PYTHON_DEFAULT,
+    alpn_protocols: SSLALPNProtocols = SSL_ALPN_NONE,
 ) -> ssl.SSLContext:
     """Return an SSL context for making requests."""
-    return _SSL_CONTEXTS.get(ssl_cipher_list, _DEFAULT_SSL_CONTEXT)
+    return _client_context(ssl_cipher_list, alpn_protocols)
 
 
 def create_client_context(
     ssl_cipher_list: SSLCipherList = SSLCipherList.PYTHON_DEFAULT,
+    alpn_protocols: SSLALPNProtocols = SSL_ALPN_NONE,
 ) -> ssl.SSLContext:
     """Return an independent SSL context for making requests."""
     # This explicitly uses the non-cached version to create a client context
-    return _create_client_context(ssl_cipher_list)
+    return _create_client_context(ssl_cipher_list, alpn_protocols)
 
 
 def create_no_verify_ssl_context(
     ssl_cipher_list: SSLCipherList = SSLCipherList.PYTHON_DEFAULT,
+    alpn_protocols: SSLALPNProtocols = SSL_ALPN_NONE,
 ) -> ssl.SSLContext:
     """Return an SSL context that does not verify the server certificate."""
-    return _client_context_no_verify(ssl_cipher_list)
+    return _client_context_no_verify(ssl_cipher_list, alpn_protocols)
 
 
 def server_context_modern() -> ssl.SSLContext:

homeassistant/util/unit_conversion.py

@@ -103,6 +103,8 @@ _AMBIENT_IDEAL_GAS_MOLAR_VOLUME = (  # m3⋅mol⁻¹
 )
 # Molar masses in g⋅mol⁻¹
 _CARBON_MONOXIDE_MOLAR_MASS = 28.01
+_NITROGEN_DIOXIDE_MOLAR_MASS = 46.0055
+_OZONE_MOLAR_MASS = 48.00
 _SULPHUR_DIOXIDE_MOLAR_MASS = 64.066
 
 
@@ -186,6 +188,52 @@ class BaseUnitConverter:
         return (from_unit in cls._UNIT_INVERSES) != (to_unit in cls._UNIT_INVERSES)
 
 
+class ApparentPowerConverter(BaseUnitConverter):
+    """Utility to convert apparent power values."""
+
+    UNIT_CLASS = "apparent_power"
+    _UNIT_CONVERSION: dict[str | None, float] = {
+        UnitOfApparentPower.MILLIVOLT_AMPERE: 1 * 1000,
+        UnitOfApparentPower.VOLT_AMPERE: 1,
+        UnitOfApparentPower.KILO_VOLT_AMPERE: 1 / 1000,
+    }
+    VALID_UNITS = {
+        UnitOfApparentPower.MILLIVOLT_AMPERE,
+        UnitOfApparentPower.VOLT_AMPERE,
+        UnitOfApparentPower.KILO_VOLT_AMPERE,
+    }
+
+
+class AreaConverter(BaseUnitConverter):
+    """Utility to convert area values."""
+
+    UNIT_CLASS = "area"
+    _UNIT_CONVERSION: dict[str | None, float] = {
+        UnitOfArea.SQUARE_METERS: 1,
+        UnitOfArea.SQUARE_CENTIMETERS: 1 / _CM2_TO_M2,
+        UnitOfArea.SQUARE_MILLIMETERS: 1 / _MM2_TO_M2,
+        UnitOfArea.SQUARE_KILOMETERS: 1 / _KM2_TO_M2,
+        UnitOfArea.SQUARE_INCHES: 1 / _IN2_TO_M2,
+        UnitOfArea.SQUARE_FEET: 1 / _FT2_TO_M2,
+        UnitOfArea.SQUARE_YARDS: 1 / _YD2_TO_M2,
+        UnitOfArea.SQUARE_MILES: 1 / _MI2_TO_M2,
+        UnitOfArea.ACRES: 1 / _ACRE_TO_M2,
+        UnitOfArea.HECTARES: 1 / _HECTARE_TO_M2,
+    }
+    VALID_UNITS = set(UnitOfArea)
+
+
+class BloodGlucoseConcentrationConverter(BaseUnitConverter):
+    """Utility to convert blood glucose concentration values."""
+
+    UNIT_CLASS = "blood_glucose_concentration"
+    _UNIT_CONVERSION: dict[str | None, float] = {
+        UnitOfBloodGlucoseConcentration.MILLIGRAMS_PER_DECILITER: 18,
+        UnitOfBloodGlucoseConcentration.MILLIMOLE_PER_LITER: 1,
+    }
+    VALID_UNITS = set(UnitOfBloodGlucoseConcentration)
+
+
 class CarbonMonoxideConcentrationConverter(BaseUnitConverter):
     """Convert carbon monoxide ratio to mass per volume.
 
@@ -211,20 +259,16 @@ class CarbonMonoxideConcentrationConverter(BaseUnitConverter):
     }
 
 
-class SulphurDioxideConcentrationConverter(BaseUnitConverter):
-    """Convert sulphur dioxide ratio to mass per volume."""
+class ConductivityConverter(BaseUnitConverter):
+    """Utility to convert electric current values."""
 
-    UNIT_CLASS = "sulphur_dioxide"
+    UNIT_CLASS = "conductivity"
     _UNIT_CONVERSION: dict[str | None, float] = {
-        CONCENTRATION_PARTS_PER_BILLION: 1e9,
-        CONCENTRATION_MICROGRAMS_PER_CUBIC_METER: (
-            _SULPHUR_DIOXIDE_MOLAR_MASS / _AMBIENT_IDEAL_GAS_MOLAR_VOLUME * 1e6
-        ),
-    }
-    VALID_UNITS = {
-        CONCENTRATION_PARTS_PER_BILLION,
-        CONCENTRATION_MICROGRAMS_PER_CUBIC_METER,
+        UnitOfConductivity.MICROSIEMENS_PER_CM: 1,
+        UnitOfConductivity.MILLISIEMENS_PER_CM: 1e-3,
+        UnitOfConductivity.SIEMENS_PER_CM: 1e-6,
     }
+    VALID_UNITS = set(UnitOfConductivity)
 
 
 class DataRateConverter(BaseUnitConverter):
@@ -248,25 +292,6 @@ class DataRateConverter(BaseUnitConverter):
     VALID_UNITS = set(UnitOfDataRate)
 
 
-class AreaConverter(BaseUnitConverter):
-    """Utility to convert area values."""
-
-    UNIT_CLASS = "area"
-    _UNIT_CONVERSION: dict[str | None, float] = {
-        UnitOfArea.SQUARE_METERS: 1,
-        UnitOfArea.SQUARE_CENTIMETERS: 1 / _CM2_TO_M2,
-        UnitOfArea.SQUARE_MILLIMETERS: 1 / _MM2_TO_M2,
-        UnitOfArea.SQUARE_KILOMETERS: 1 / _KM2_TO_M2,
-        UnitOfArea.SQUARE_INCHES: 1 / _IN2_TO_M2,
-        UnitOfArea.SQUARE_FEET: 1 / _FT2_TO_M2,
-        UnitOfArea.SQUARE_YARDS: 1 / _YD2_TO_M2,
-        UnitOfArea.SQUARE_MILES: 1 / _MI2_TO_M2,
-        UnitOfArea.ACRES: 1 / _ACRE_TO_M2,
-        UnitOfArea.HECTARES: 1 / _HECTARE_TO_M2,
-    }
-    VALID_UNITS = set(UnitOfArea)
-
-
 class DistanceConverter(BaseUnitConverter):
     """Utility to convert distance values."""
 
@@ -295,27 +320,28 @@ class DistanceConverter(BaseUnitConverter):
     }
 
 
-class BloodGlucoseConcentrationConverter(BaseUnitConverter):
-    """Utility to convert blood glucose concentration values."""
+class DurationConverter(BaseUnitConverter):
+    """Utility to convert duration values."""
 
-    UNIT_CLASS = "blood_glucose_concentration"
+    UNIT_CLASS = "duration"
     _UNIT_CONVERSION: dict[str | None, float] = {
-        UnitOfBloodGlucoseConcentration.MILLIGRAMS_PER_DECILITER: 18,
-        UnitOfBloodGlucoseConcentration.MILLIMOLE_PER_LITER: 1,
+        UnitOfTime.MICROSECONDS: 1000000,
+        UnitOfTime.MILLISECONDS: 1000,
+        UnitOfTime.SECONDS: 1,
+        UnitOfTime.MINUTES: 1 / _MIN_TO_SEC,
+        UnitOfTime.HOURS: 1 / _HRS_TO_SECS,
+        UnitOfTime.DAYS: 1 / _DAYS_TO_SECS,
+        UnitOfTime.WEEKS: 1 / (7 * _DAYS_TO_SECS),
     }
-    VALID_UNITS = set(UnitOfBloodGlucoseConcentration)
-
-
-class ConductivityConverter(BaseUnitConverter):
-    """Utility to convert electric current values."""
-
-    UNIT_CLASS = "conductivity"
-    _UNIT_CONVERSION: dict[str | None, float] = {
-        UnitOfConductivity.MICROSIEMENS_PER_CM: 1,
-        UnitOfConductivity.MILLISIEMENS_PER_CM: 1e-3,
-        UnitOfConductivity.SIEMENS_PER_CM: 1e-6,
+    VALID_UNITS = {
+        UnitOfTime.MICROSECONDS,
+        UnitOfTime.MILLISECONDS,
+        UnitOfTime.SECONDS,
+        UnitOfTime.MINUTES,
+        UnitOfTime.HOURS,
+        UnitOfTime.DAYS,
+        UnitOfTime.WEEKS,
     }
-    VALID_UNITS = set(UnitOfConductivity)
 
 
 class ElectricCurrentConverter(BaseUnitConverter):
@@ -444,19 +470,51 @@ class MassConverter(BaseUnitConverter):
     }
 
 
-class ApparentPowerConverter(BaseUnitConverter):
-    """Utility to convert apparent power values."""
+class MassVolumeConcentrationConverter(BaseUnitConverter):
+    """Utility to convert mass volume concentration values."""
 
-    UNIT_CLASS = "apparent_power"
+    UNIT_CLASS = "concentration"
     _UNIT_CONVERSION: dict[str | None, float] = {
-        UnitOfApparentPower.MILLIVOLT_AMPERE: 1 * 1000,
-        UnitOfApparentPower.VOLT_AMPERE: 1,
-        UnitOfApparentPower.KILO_VOLT_AMPERE: 1 / 1000,
+        CONCENTRATION_MICROGRAMS_PER_CUBIC_METER: 1000000.0,  # 1000 µg/m³ = 1 mg/m³
+        CONCENTRATION_MILLIGRAMS_PER_CUBIC_METER: 1000.0,  # 1000 mg/m³ = 1 g/m³
+        CONCENTRATION_GRAMS_PER_CUBIC_METER: 1.0,
     }
     VALID_UNITS = {
-        UnitOfApparentPower.MILLIVOLT_AMPERE,
-        UnitOfApparentPower.VOLT_AMPERE,
-        UnitOfApparentPower.KILO_VOLT_AMPERE,
+        CONCENTRATION_MICROGRAMS_PER_CUBIC_METER,
+        CONCENTRATION_MILLIGRAMS_PER_CUBIC_METER,
+        CONCENTRATION_GRAMS_PER_CUBIC_METER,
+    }
+
+
+class NitrogenDioxideConcentrationConverter(BaseUnitConverter):
+    """Convert nitrogen dioxide ratio to mass per volume."""
+
+    UNIT_CLASS = "nitrogen_dioxide"
+    _UNIT_CONVERSION: dict[str | None, float] = {
+        CONCENTRATION_PARTS_PER_BILLION: 1e9,
+        CONCENTRATION_MICROGRAMS_PER_CUBIC_METER: (
+            _NITROGEN_DIOXIDE_MOLAR_MASS / _AMBIENT_IDEAL_GAS_MOLAR_VOLUME * 1e6
+        ),
+    }
+    VALID_UNITS = {
+        CONCENTRATION_PARTS_PER_BILLION,
+        CONCENTRATION_MICROGRAMS_PER_CUBIC_METER,
+    }
+
+
+class OzoneConcentrationConverter(BaseUnitConverter):
+    """Convert ozone ratio to mass per volume."""
+
+    UNIT_CLASS = "ozone"
+    _UNIT_CONVERSION: dict[str | None, float] = {
+        CONCENTRATION_PARTS_PER_BILLION: 1e9,
+        CONCENTRATION_MICROGRAMS_PER_CUBIC_METER: (
+            _OZONE_MOLAR_MASS / _AMBIENT_IDEAL_GAS_MOLAR_VOLUME * 1e6
+        ),
+    }
+    VALID_UNITS = {
+        CONCENTRATION_PARTS_PER_BILLION,
+        CONCENTRATION_MICROGRAMS_PER_CUBIC_METER,
     }
 
 
@@ -645,6 +703,22 @@ class SpeedConverter(BaseUnitConverter):
         return float(0.836 * beaufort ** (3 / 2))
 
 
+class SulphurDioxideConcentrationConverter(BaseUnitConverter):
+    """Convert sulphur dioxide ratio to mass per volume."""
+
+    UNIT_CLASS = "sulphur_dioxide"
+    _UNIT_CONVERSION: dict[str | None, float] = {
+        CONCENTRATION_PARTS_PER_BILLION: 1e9,
+        CONCENTRATION_MICROGRAMS_PER_CUBIC_METER: (
+            _SULPHUR_DIOXIDE_MOLAR_MASS / _AMBIENT_IDEAL_GAS_MOLAR_VOLUME * 1e6
+        ),
+    }
+    VALID_UNITS = {
+        CONCENTRATION_PARTS_PER_BILLION,
+        CONCENTRATION_MICROGRAMS_PER_CUBIC_METER,
+    }
+
+
 class TemperatureConverter(BaseUnitConverter):
     """Utility to convert temperature values."""
 
@@ -815,22 +889,6 @@ class UnitlessRatioConverter(BaseUnitConverter):
     }
 
 
-class MassVolumeConcentrationConverter(BaseUnitConverter):
-    """Utility to convert mass volume concentration values."""
-
-    UNIT_CLASS = "concentration"
-    _UNIT_CONVERSION: dict[str | None, float] = {
-        CONCENTRATION_MICROGRAMS_PER_CUBIC_METER: 1000000.0,  # 1000 µg/m³ = 1 mg/m³
-        CONCENTRATION_MILLIGRAMS_PER_CUBIC_METER: 1000.0,  # 1000 mg/m³ = 1 g/m³
-        CONCENTRATION_GRAMS_PER_CUBIC_METER: 1.0,
-    }
-    VALID_UNITS = {
-        CONCENTRATION_MICROGRAMS_PER_CUBIC_METER,
-        CONCENTRATION_MILLIGRAMS_PER_CUBIC_METER,
-        CONCENTRATION_GRAMS_PER_CUBIC_METER,
-    }
-
-
 class VolumeConverter(BaseUnitConverter):
     """Utility to convert volume values."""
 
@@ -893,27 +951,3 @@ class VolumeFlowRateConverter(BaseUnitConverter):
         UnitOfVolumeFlowRate.GALLONS_PER_DAY,
         UnitOfVolumeFlowRate.MILLILITERS_PER_SECOND,
     }
-
-
-class DurationConverter(BaseUnitConverter):
-    """Utility to convert duration values."""
-
-    UNIT_CLASS = "duration"
-    _UNIT_CONVERSION: dict[str | None, float] = {
-        UnitOfTime.MICROSECONDS: 1000000,
-        UnitOfTime.MILLISECONDS: 1000,
-        UnitOfTime.SECONDS: 1,
-        UnitOfTime.MINUTES: 1 / _MIN_TO_SEC,
-        UnitOfTime.HOURS: 1 / _HRS_TO_SECS,
-        UnitOfTime.DAYS: 1 / _DAYS_TO_SECS,
-        UnitOfTime.WEEKS: 1 / (7 * _DAYS_TO_SECS),
-    }
-    VALID_UNITS = {
-        UnitOfTime.MICROSECONDS,
-        UnitOfTime.MILLISECONDS,
-        UnitOfTime.SECONDS,
-        UnitOfTime.MINUTES,
-        UnitOfTime.HOURS,
-        UnitOfTime.DAYS,
-        UnitOfTime.WEEKS,
-    }

pyproject.toml

@@ -676,7 +676,7 @@ exclude_lines = [
 ]
 
 [tool.ruff]
-required-version = ">=0.13.0"
+required-version = ">=0.14.13"
 
 [tool.ruff.lint]
 select = [

requirements_all.txt

@@ -334,7 +334,7 @@ aionanoleaf==0.2.1
 aionotion==2024.03.0
 
 # homeassistant.components.ntfy
-aiontfy==0.6.1
+aiontfy==0.7.0
 
 # homeassistant.components.nut
 aionut==4.3.4
@@ -1104,7 +1104,7 @@ google-nest-sdm==9.1.2
 google-photos-library-api==0.12.1
 
 # homeassistant.components.google_air_quality
-google_air_quality_api==2.1.2
+google_air_quality_api==3.0.0
 
 # homeassistant.components.slide
 # homeassistant.components.slide_local
@@ -1184,7 +1184,7 @@ hassil==3.5.0
 hdate[astral]==1.1.2
 
 # homeassistant.components.hdfury
-hdfury==1.3.1
+hdfury==1.4.2
 
 # homeassistant.components.heatmiser
 heatmiserV3==2.0.4
@@ -1281,7 +1281,7 @@ ihcsdk==2.8.5
 imeon_inverter_api==0.4.0
 
 # homeassistant.components.imgw_pib
-imgw_pib==1.6.0
+imgw_pib==2.0.1
 
 # homeassistant.components.incomfort
 incomfort-client==0.6.11
@@ -1646,7 +1646,7 @@ omnilogic==0.4.5
 ondilo==0.5.0
 
 # homeassistant.components.onedrive
-onedrive-personal-sdk==0.1.0
+onedrive-personal-sdk==0.1.1
 
 # homeassistant.components.onvif
 onvif-zeep-async==4.0.4
@@ -1909,7 +1909,7 @@ pyatag==0.3.5.3
 pyatmo==9.2.3
 
 # homeassistant.components.apple_tv
-pyatv==0.16.1;python_version<'3.14'
+pyatv==0.17.0
 
 # homeassistant.components.aussie_broadband
 pyaussiebb==0.1.5
@@ -2147,7 +2147,7 @@ pykmtronic==0.3.0
 pykodi==0.2.7
 
 # homeassistant.components.kostal_plenticore
-pykoplenti==1.3.0
+pykoplenti==1.5.0
 
 # homeassistant.components.kraken
 pykrakenapi==0.1.8
@@ -3080,7 +3080,7 @@ typedmonarchmoney==0.4.4
 uasiren==0.0.1
 
 # homeassistant.components.unifiprotect
-uiprotect==8.1.1
+uiprotect==10.0.1
 
 # homeassistant.components.landisgyr_heat_meter
 ultraheat-api==0.5.7

requirements_test_all.txt

@@ -319,7 +319,7 @@ aionanoleaf==0.2.1
 aionotion==2024.03.0
 
 # homeassistant.components.ntfy
-aiontfy==0.6.1
+aiontfy==0.7.0
 
 # homeassistant.components.nut
 aionut==4.3.4
@@ -980,7 +980,7 @@ google-nest-sdm==9.1.2
 google-photos-library-api==0.12.1
 
 # homeassistant.components.google_air_quality
-google_air_quality_api==2.1.2
+google_air_quality_api==3.0.0
 
 # homeassistant.components.slide
 # homeassistant.components.slide_local
@@ -1051,7 +1051,7 @@ hassil==3.5.0
 hdate[astral]==1.1.2
 
 # homeassistant.components.hdfury
-hdfury==1.3.1
+hdfury==1.4.2
 
 # homeassistant.components.here_travel_time
 here-routing==1.2.0
@@ -1127,7 +1127,7 @@ igloohome-api==0.1.1
 imeon_inverter_api==0.4.0
 
 # homeassistant.components.imgw_pib
-imgw_pib==1.6.0
+imgw_pib==2.0.1
 
 # homeassistant.components.incomfort
 incomfort-client==0.6.11
@@ -1429,7 +1429,7 @@ omnilogic==0.4.5
 ondilo==0.5.0
 
 # homeassistant.components.onedrive
-onedrive-personal-sdk==0.1.0
+onedrive-personal-sdk==0.1.1
 
 # homeassistant.components.onvif
 onvif-zeep-async==4.0.4
@@ -1637,7 +1637,7 @@ pyatag==0.3.5.3
 pyatmo==9.2.3
 
 # homeassistant.components.apple_tv
-pyatv==0.16.1;python_version<'3.14'
+pyatv==0.17.0
 
 # homeassistant.components.aussie_broadband
 pyaussiebb==0.1.5
@@ -1821,7 +1821,7 @@ pykmtronic==0.3.0
 pykodi==0.2.7
 
 # homeassistant.components.kostal_plenticore
-pykoplenti==1.3.0
+pykoplenti==1.5.0
 
 # homeassistant.components.kraken
 pykrakenapi==0.1.8
@@ -2577,7 +2577,7 @@ typedmonarchmoney==0.4.4
 uasiren==0.0.1
 
 # homeassistant.components.unifiprotect
-uiprotect==8.1.1
+uiprotect==10.0.1
 
 # homeassistant.components.landisgyr_heat_meter
 ultraheat-api==0.5.7