Extend script continue_on_error suppression when calling actions

2026-05-21 08:15:14 +02:00 · 2026-04-21 10:01:08 +02:00
10750 changed files with 61049 additions and 218457 deletions
@@ -18,13 +18,6 @@ description: Reviews GitHub pull requests and provides feedback comments. This i
 4. Ensure any existing review comments have been addressed.
 5. Generate constructive review comments in the CONSOLE. DO NOT POST TO GITHUB YOURSELF.

-## Verification:
-
- After the review, run parallel subagents for each finding to double check it.
- Spawn up to a maximum of 10 parallel subagents at a time.
- Gather the results from the subagents and summarize them in the final review comments.
-
-
 ## IMPORTANT:
 - Just review. DO NOT make any changes
 - Be constructive and specific in your comments
@@ -34,13 +27,12 @@ description: Reviews GitHub pull requests and provides feedback comments. This i
 - No need to highlight things that are already good.

 ## Output format:
- List specific comments for each file/line that needs attention.
+- List specific comments for each file/line that needs attention
 - In the end, summarize with an overall assessment (approve, request changes, or comment) and bullet point list of changes suggested, if any.
  - Example output:
    ```
    Overall assessment: request changes.
-    - [CRITICAL] sensor.py:143 - Memory leak
-    - [PROBLEM] data_processing.py:87 - Inefficient algorithm
-    - [SUGGESTION] test_init.py:45 - Improve x variable name
+    - [CRITICAL] Memory leak in homeassistant/components/sensor/my_sensor.py:143
+    - [PROBLEM] Inefficient algorithm in homeassistant/helpers/data_processing.py:87
+    - [SUGGESTION] Improve variable naming in homeassistant/helpers/config_validation.py:45
    ```
-  - Make sure to include the file and line number when possible in the bullet points.
@@ -1,5 +1,5 @@
 ---
-name: ha-integration-knowledge
+name: Home Assistant Integration knowledge
 description: Everything you need to know to build, test and review Home Assistant Integrations. If you're looking at an integration, you must use this as your primary reference.
 ---

@@ -14,16 +14,11 @@ description: Everything you need to know to build, test and review Home Assistan
 - Do NOT allow users to set config entry names in config flows. Names are automatically generated or can be customized later in UI. Exception: helper integrations may allow custom names.
 - For entity actions and entity services, avoid requesting redundant defensive checks for fields already enforced by Home Assistant validation schemas and entity filters; only request extra guards when values bypass validation or are transformed unsafely.
 - When validation guarantees a key is present, prefer direct dictionary indexing (`data["key"]`) over `.get("key")` so invalid assumptions fail fast.
- Integrations should be thin wrappers. Protocol parsing, device state machines, or other domain logic belong in a separate PyPI library, not in the integration itself. If unsure, ask before inlining.
- Integrations should not implement fixes or workarounds for limitations in libraries. Instead, the library should be updated to fix the issue.

 The following platforms have extra guidelines:
 - **Diagnostics**: [`platform-diagnostics.md`](platform-diagnostics.md) for diagnostic data collection
 - **Repairs**: [`platform-repairs.md`](platform-repairs.md) for user-actionable repair issues

-## Entity platforms
-
- Ensure `async_added_to_hass()` and `async_will_remove_from_hass()` have symmetrical behavior. For example, if a subscription is created in `async_added_to_hass()`, it should be unsubscribed in `async_will_remove_from_hass()`. Also, if something is torn down in `async_will_remove_from_hass()`, it should be set up in `async_added_to_hass()`.

 ## Integration Quality Scale

@@ -36,7 +36,6 @@ base_platforms: &base_platforms
  - homeassistant/components/image_processing/**
  - homeassistant/components/infrared/**
  - homeassistant/components/lawn_mower/**
-  - homeassistant/components/radio_frequency/**
  - homeassistant/components/light/**
  - homeassistant/components/lock/**
  - homeassistant/components/media_player/**
@@ -14,6 +14,7 @@ Dockerfile.dev linguist-language=Dockerfile

 # Generated files
 CODEOWNERS linguist-generated=true
+Dockerfile linguist-generated=true
 homeassistant/generated/*.py linguist-generated=true
 machine/* linguist-generated=true
 mypy.ini linguist-generated=true
@@ -22,4 +23,3 @@ requirements_all.txt linguist-generated=true
 requirements_test_all.txt linguist-generated=true
 requirements_test_pre_commit.txt linguist-generated=true
 script/hassfest/docker/Dockerfile linguist-generated=true
-.github/workflows/*.lock.yml linguist-generated=true
@@ -5,8 +5,7 @@
 # Copilot code review instructions

 - Start review comments with a short, one-sentence summary of the suggested fix.
- Do not comment on code style, formatting or linting issues.
- A Pull Request with a dependency version bump should only contain changes required for the version bump. If the PR includes other changes, request that they are removed from the PR.
+- Do not add comments about code style, formatting or linting issues.

 # GitHub Copilot & Claude Code Instructions

@@ -16,36 +15,27 @@ This repository contains the core of Home Assistant, a Python 3 based home autom

 - **Do NOT amend, squash, or rebase commits that have already been pushed to the PR branch after the PR is opened** - Reviewers need to follow the commit history, as well as see what changed since their last review

-## Pull Requests
-
- When opening a pull request, use the repository's PR template (`.github/PULL_REQUEST_TEMPLATE.md`). NEVER REMOVE ANYTHING from the template.
- Do not remove checkboxes that are not checked — leave all unchecked checkboxes in place so reviewers can see which options were not selected.
-
 ## Development Commands

- When entering a new environment or worktree, run `script/setup` to set up the virtual environment with all development dependencies (pylint, pre-commit hooks, etc.). This is required before committing.
- .vscode/tasks.json contains useful commands used for development.
+.vscode/tasks.json contains useful commands used for development.

 ## Python Syntax Notes

- Home Assistant officially supports Python 3.14 as its minimum version. Do not flag syntax or features that require Python 3.14 as issues, and do not suggest workarounds for older Python versions.
- Python 3.14 explicitly allows `except TypeA, TypeB:` without parentheses. Never flag this as an issue.
- Python 3.14 evaluates annotations lazily (PEP 649). Forward references in annotations do not need to be quoted — annotations can reference names defined later in the module without quoting them or using `from __future__ import annotations`. Do not flag unquoted forward references in annotations as issues.
+- Python 3.14 explicitly allows `except TypeA, TypeB:` without parentheses.

 ## Testing

- Use `uv run pytest` to run tests
- After modifying `strings.json` for an integration, regenerate the English translation file before running tests: `.venv/bin/python3 -m script.translations develop --integration <integration_name>`. Tests load translations from the generated `translations/en.json`, not directly from `strings.json`.
- When writing or modifying tests, ensure all test function parameters have type annotations.
- Prefer concrete types (for example, `HomeAssistant`, `MockConfigEntry`, etc.) over `Any`.
- Prefer `@pytest.mark.usefixtures` over arguments, if the argument is not going to be used.
- Avoid using conditions/branching in tests. Instead, either split tests or adjust the test parametrization to cover all cases without branching.
- If multiple tests share most of their code, use `pytest.mark.parametrize` to merge them into a single parameterized test instead of duplicating the body. Use `pytest.param` with an `id` parameter to name the test cases clearly.
- We use Syrupy for snapshot testing. Leverage `.ambr` snapshots instead of repetitive and exhaustive generation of test data within Python code itself.
+When writing or modifying tests, ensure all test function parameters have type annotations.
+Prefer concrete types (for example, `HomeAssistant`, `MockConfigEntry`, etc.) over `Any`.

 ## Good practices

- Integrations with Platinum or Gold level in the Integration Quality Scale reflect a high standard of code quality and maintainability. When looking for examples of something, these are good places to start. The level is indicated in the manifest.json of the integration.
- When reviewing entity actions, do not suggest extra defensive checks for input fields that are already validated by Home Assistant's service/action schemas and entity selection filters. Suggest additional guards only when data bypasses those validators or is transformed into a less-safe form.
- When validation guarantees a dict key exists, prefer direct key access (`data["key"]`) instead of `.get("key")` so contract violations are surfaced instead of silently masked.
- Do not add comments that just restate the code on the following line(s) (e.g. `# Check if initialized` above `if self.initialized:`). Comments should only explain why — non-obvious constraints, surprising behavior, or workarounds — never what.
+Integrations with Platinum or Gold level in the Integration Quality Scale reflect a high standard of code quality and maintainability. When looking for examples of something, these are good places to start. The level is indicated in the manifest.json of the integration.
+
+When reviewing entity actions, do not suggest extra defensive checks for input fields that are already validated by Home Assistant's service/action schemas and entity selection filters. Suggest additional guards only when data bypasses those validators or is transformed into a less-safe form.
+When validation guarantees a dict key exists, prefer direct key access (`data["key"]`) instead of `.get("key")` so contract violations are surfaced instead of silently masked.
+
+
+# Skills
+
+- Home Assistant Integration knowledge: .claude/skills/integrations/SKILL.md
@@ -11,6 +11,3 @@ updates:
      - github_actions
    cooldown:
      default-days: 7
-    ignore:
-      # Managed by gh aw compile. Version-locked to the gh-aw compiler; do not bump.
-      - dependency-name: "github/gh-aw-actions/**"
@@ -1,50 +0,0 @@
---
-applyTo: "homeassistant/components/**, tests/components/**"
-excludeAgent: "cloud-agent"
---
-
-<!-- Automatically generated by gen_copilot_instructions.py, do not edit -->
-
-
-## File Locations
- **Integration code**: `./homeassistant/components/<integration_domain>/`
- **Integration tests**: `./tests/components/<integration_domain>/`
-
-## General guidelines
-
- When looking for examples, prefer integrations with the platinum or gold quality scale level first.
- Polling intervals are NOT user-configurable. Never add scan_interval, update_interval, or polling frequency options to config flows or config entries.
- Do NOT allow users to set config entry names in config flows. Names are automatically generated or can be customized later in UI. Exception: helper integrations may allow custom names.
- For entity actions and entity services, avoid requesting redundant defensive checks for fields already enforced by Home Assistant validation schemas and entity filters; only request extra guards when values bypass validation or are transformed unsafely.
- When validation guarantees a key is present, prefer direct dictionary indexing (`data["key"]`) over `.get("key")` so invalid assumptions fail fast.
- Integrations should be thin wrappers. Protocol parsing, device state machines, or other domain logic belong in a separate PyPI library, not in the integration itself. If unsure, ask before inlining.
- Integrations should not implement fixes or workarounds for limitations in libraries. Instead, the library should be updated to fix the issue.
-
-The following platforms have extra guidelines:
- **Diagnostics**: [`platform-diagnostics.md`](platform-diagnostics.md) for diagnostic data collection
- **Repairs**: [`platform-repairs.md`](platform-repairs.md) for user-actionable repair issues
-
-## Entity platforms
-
- Ensure `async_added_to_hass()` and `async_will_remove_from_hass()` have symmetrical behavior. For example, if a subscription is created in `async_added_to_hass()`, it should be unsubscribed in `async_will_remove_from_hass()`. Also, if something is torn down in `async_will_remove_from_hass()`, it should be set up in `async_added_to_hass()`.
-
-## Integration Quality Scale
-
- When validating the quality scale rules, check them at https://developers.home-assistant.io/docs/core/integration-quality-scale/rules
- When implementing or reviewing an integration, always consider the quality scale rules, since they promote best practices.
-
-Template scale file: `./script/scaffold/templates/integration/integration/quality_scale.yaml`
-
-### How Rules Apply
-1. **Check `manifest.json`**: Look for `"quality_scale"` key to determine integration level
-2. **Bronze Rules**: Always required for any integration with quality scale
-3. **Higher Tier Rules**: Only apply if integration targets that tier or higher
-4. **Rule Status**: Check `quality_scale.yaml` in integration folder for:
-   - `done`: Rule implemented
-   - `exempt`: Rule doesn't apply (with reason in comment)
-   - `todo`: Rule needs implementation
-
-
-## Testing Requirements
-
- Tests should avoid interacting or mocking internal integration details. For more info, see https://developers.home-assistant.io/docs/development_testing/#writing-tests-for-integrations
@@ -6,8 +6,7 @@
    "pep621",
    "pip_requirements",
    "pre-commit",
-    "dockerfile",
-    "custom.regex",
+    "regex",
    "homeassistant-manifest"
  ],

@@ -22,32 +21,19 @@
    ]
  },

-  "dockerfile": {
-    "managerFilePatterns": ["/^Dockerfile$/"]
-  },
-
  "homeassistant-manifest": {
    "managerFilePatterns": [
      "/^homeassistant/components/[^/]+/manifest\\.json$/"
    ]
  },

-  "customManagers": [
+  "regexManagers": [
    {
-      "customType": "regex",
      "description": "Update ruff required-version in pyproject.toml",
      "managerFilePatterns": ["/^pyproject\\.toml$/"],
      "matchStrings": ["required-version = \">=(?<currentValue>[\\d.]+)\""],
      "depNameTemplate": "ruff",
      "datasourceTemplate": "pypi"
-    },
-    {
-      "customType": "regex",
-      "description": "Update go2rtc RECOMMENDED_VERSION in const.py alongside the Dockerfile pin",
-      "managerFilePatterns": ["/^homeassistant/components/go2rtc/const\\.py$/"],
-      "matchStrings": ["RECOMMENDED_VERSION = \"(?<currentValue>[\\d.]+)\""],
-      "depNameTemplate": "ghcr.io/alexxit/go2rtc",
-      "datasourceTemplate": "docker"
    }
  ],

@@ -128,7 +114,6 @@
        "standard-aifc",
        "standard-telnetlib",
        "ulid-transform",
-        "unidiff",
        "url-normalize",
        "xmltodict"
      ],
@@ -142,8 +127,7 @@
        "home-assistant-bluetooth",
        "home-assistant-frontend",
        "home-assistant-intents",
-        "infrared-protocols",
-        "rf-protocols"
+        "infrared-protocols"
      ],
      "enabled": true,
      "minimumReleaseAge": null,
@@ -198,13 +182,6 @@
      "enabled": true,
      "labels": ["dependency"]
    },
-    {
-      "description": "Docker allowlist (ghcr.io exposes no release timestamps so the global cooldown needs to be bypassed)",
-      "matchPackageNames": ["ghcr.io/alexxit/go2rtc"],
-      "enabled": true,
-      "minimumReleaseAge": null,
-      "labels": ["dependency"]
-    },
    {
      "description": "Group ruff pre-commit hook with its PyPI twin into one PR",
      "matchPackageNames": ["astral-sh/ruff-pre-commit", "ruff"],
@@ -234,12 +211,6 @@
      "matchPackageNames": ["pylint", "astroid"],
      "groupName": "pylint",
      "groupSlug": "pylint"
-    },
-    {
-      "description": "Group go2rtc Dockerfile pin with const.py RECOMMENDED_VERSION into one PR",
-      "matchPackageNames": ["ghcr.io/alexxit/go2rtc"],
-      "groupName": "go2rtc",
-      "groupSlug": "go2rtc"
    }
  ]
 }
@@ -14,7 +14,7 @@ env:
  UV_HTTP_TIMEOUT: 60
  UV_SYSTEM_PYTHON: "true"
  # Base image version from https://github.com/home-assistant/docker
-  BASE_IMAGE_VERSION: "2026.05.0"
+  BASE_IMAGE_VERSION: "2026.01.0"
  ARCHITECTURES: '["amd64", "aarch64"]'

 permissions: {}
@@ -108,7 +108,7 @@ jobs:

      - name: Download nightly wheels of frontend
        if: needs.init.outputs.channel == 'dev'
-        uses: dawidd6/action-download-artifact@b6e2e70617bc3265edd6dab6c906732b2f1ae151 # v21
+        uses: dawidd6/action-download-artifact@8305c0f1062bb0d184d09ef4493ecb9288447732 # v20
        with:
          github_token: ${{secrets.GITHUB_TOKEN}}
          repo: home-assistant/frontend
@@ -119,7 +119,7 @@ jobs:

      - name: Download nightly wheels of intents
        if: needs.init.outputs.channel == 'dev'
-        uses: dawidd6/action-download-artifact@b6e2e70617bc3265edd6dab6c906732b2f1ae151 # v21
+        uses: dawidd6/action-download-artifact@8305c0f1062bb0d184d09ef4493ecb9288447732 # v20
        with:
          github_token: ${{secrets.GITHUB_TOKEN}}
          repo: OHF-Voice/intents-package
@@ -323,7 +323,7 @@ jobs:
          exclude-list: '["odroid-xu","qemuarm","qemux86","raspberrypi","raspberrypi2","raspberrypi3","raspberrypi4","tinker"]'

  publish_container:
-    name: Publish to ${{ matrix.registry }}
+    name: Publish meta container for ${{ matrix.registry }}
    environment: ${{ needs.init.outputs.channel }}
    if: github.repository_owner == 'home-assistant'
    needs: ["init", "build_base"]
@@ -338,7 +338,7 @@ jobs:
        registry: ["ghcr.io/home-assistant", "docker.io/homeassistant"]
    steps:
      - name: Install Cosign
-        uses: sigstore/cosign-installer@6f9f17788090df1f26f669e9d70d6ae9567deba6 # v4.1.2
+        uses: sigstore/cosign-installer@cad07c2e89fa2edd6e2d7bab4c1aa38e53f76003 # v4.1.1
        with:
          cosign-release: "v2.5.3"

@@ -1,74 +0,0 @@
-name: Check requirements (deterministic)
-
-# Stage 1 of the Check requirements pipeline.
-#
-# Runs the deterministic Python checks and uploads the structured
-# results as an artifact. Stage 2 (the agentic workflow defined in
-# `check-requirements.md`) consumes the artifact on completion.
-
-# yamllint disable-line rule:truthy
-on:
-  # Auto-trigger on PRs that touch tracked requirement files is disabled
-  # for now while we iterate — testing the workflow_run handoff to the
-  # agentic stage is hard with an auto-trigger. Re-enable once the chain
-  # has been validated end-to-end.
-  # pull_request:
-  #   types: [opened, synchronize, reopened]
-  #   paths:
-  #     - "**/requirements*.txt"
-  #     - "homeassistant/package_constraints.txt"
-  workflow_dispatch:
-    inputs:
-      pull_request_number:
-        description: "Pull request number to (re-)check"
-        required: true
-        type: number
-
-permissions: {}
-
-concurrency:
-  group: ${{ github.workflow }}-${{ inputs.pull_request_number || github.event.pull_request.number }}
-  cancel-in-progress: true
-
-jobs:
-  deterministic:
-    name: Run deterministic requirement checks
-    runs-on: ubuntu-24.04
-    permissions:
-      contents: read
-      pull-requests: read # To fetch the PR diff via gh CLI
-    timeout-minutes: 10
-    steps:
-      - name: Check out code from GitHub
-        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
-        with:
-          persist-credentials: false
-      - name: Set up Python
-        uses: actions/setup-python@a309ff8b426b58ec0e2a45f0f869d46889d02405 # v6.2.0
-        with:
-          python-version-file: ".python-version"
-          check-latest: true
-      - name: Install script dependencies
-        run: pip install -r script/check_requirements/requirements.txt
-      - name: Collect PR diff
-        env:
-          GH_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-          PR_NUMBER: ${{ inputs.pull_request_number || github.event.pull_request.number }}
-        run: |
-          mkdir -p deterministic
-          gh pr diff "${PR_NUMBER}" > deterministic/pr.diff
-      - name: Run deterministic checks
-        env:
-          PR_NUMBER: ${{ inputs.pull_request_number || github.event.pull_request.number }}
-        run: |
-          python -m script.check_requirements \
-            --pr-number "${PR_NUMBER}" \
-            --diff deterministic/pr.diff \
-            --output deterministic/results.json
-      - name: Upload deterministic-results artifact
-        uses: actions/upload-artifact@043fb46d1a93c77aae656e7c1c64a875d1fc6a0a # v7.0.1
-        with:
-          name: check-requirements-deterministic
-          path: deterministic/results.json
-          if-no-files-found: error
-          retention-days: 7
@@ -1,253 +0,0 @@
---
-on:
-  workflow_run:
-    workflows: ["Check requirements (deterministic)"]
-    types: [completed]
-permissions:
-  contents: read
-  actions: read
-  issues: read
-  pull-requests: read
-network:
-  allowed:
-    - python
-tools:
-  web-fetch: {}
-  github:
-    toolsets: [default, actions]
-    min-integrity: unapproved
-safe-outputs:
-  add-comment:
-    max: 1
-    target: "${{ env.PR_NUMBER }}"
-concurrency:
-  group: ${{ github.workflow }}-${{ github.event.workflow_run.head_sha }}
-  cancel-in-progress: true
-steps:
-  - name: Download deterministic-results artifact
-    if: github.event.workflow_run.conclusion == 'success'
-    uses: actions/download-artifact@3e5f45b2cfb9172054b4087a40e8e0b5a5461e7c # v8.0.1
-    with:
-      name: check-requirements-deterministic
-      path: /tmp/gh-aw/deterministic
-      run-id: ${{ github.event.workflow_run.id }}
-      github-token: ${{ secrets.GITHUB_TOKEN }}
-  - name: Extract PR number from artifact
-    if: github.event.workflow_run.conclusion == 'success'
-    run: |
-      PR=$(python3 -c 'import json,sys;print(json.load(open("/tmp/gh-aw/deterministic/results.json"))["pr_number"])')
-      echo "PR_NUMBER=${PR}" >> "${GITHUB_ENV}"
-post-steps:
-  - name: Verify agent produced an add_comment safe-output
-    if: always() && github.event.workflow_run.conclusion == 'success'
-    run: |
-      OUTPUT=/tmp/gh-aw/agent_output.json
-      if [ ! -f "${OUTPUT}" ]; then
-        echo "::error::Agent output file ${OUTPUT} is missing; the agent did not run to completion."
-        exit 1
-      fi
-      if ! grep -q '"add_comment"' "${OUTPUT}"; then
-        echo "::error::Agent did not emit an add_comment safe-output; no review comment was posted to the PR."
-        echo "Agent output:"
-        cat "${OUTPUT}"
-        exit 1
-      fi
-description: >
-  Resolves the deterministic-stage artifact's NEEDS_AGENT checks for changed
-  Python package requirements on PRs targeting the core repo, then posts the
-  final review comment. Triggered by completion of the deterministic workflow.
-  Reads the uploaded artifact from disk, replaces placeholders for any check
-  whose status is `needs_agent`, and posts the merged comment using the PR
-  number recorded inside the artifact itself. Each check kind has a dedicated
-  instruction section below; if the artifact contains a check kind that does
-  not have a section here, the agent fails hard rather than guess.
---
-
-# Check requirements (AW)
-
-You are a code review assistant for the Home Assistant project. The
-deterministic stage has already evaluated every check it can on its own
-and produced an artifact containing the PR number, per-package check
-results, and a pre-rendered comment with placeholders. **Your only job is
-to read that artifact, resolve any `needs_agent` checks, and post the
-final comment.**
-
-## Step 1 — Read the deterministic-stage artifact
-
-The deterministic stage uploaded its results to the runner at
-`/tmp/gh-aw/deterministic/results.json`.
-
-The JSON has this shape:
-
- `pr_number` — the PR being checked. The `add_comment` safe-output is
-  already targeted at this PR (the workflow extracted `pr_number` from
-  the artifact and wired it into the safe-output config), so **you do
-  not need to set `item_number` yourself** — just emit `add_comment`
-  with the rendered body.
- `needs_agent` — `true` iff any package's check needs resolution.
- `packages[]` — one entry per changed package. Each entry has:
-  - `name`, `old_version` (`null` for a newly added package; otherwise the
-    previous pin), `new_version`, `repo_url`, `publisher_kind`.
-  - `checks` — a dict keyed by **check kind** (string). Each value has a
-    `status` (`pass`, `warn`, `fail`, or `needs_agent`) and `details`.
- `rendered_comment` — the final PR comment body, already rendered. For
-  every check whose status is `needs_agent` it contains two placeholders
-  you must replace:
-  - `{{CHECK_CELL:<pkg-name>:<check-kind>}}` — one cell of the summary
-    table. Replace with exactly one of `✅`, `⚠️`, `❌`.
-  - `{{CHECK_DETAIL:<pkg-name>:<check-kind>}}` — the body of one bullet
-    in the package's `<details>` block. Replace with
-    `<icon> <one-line explanation>` (the bullet's leading
-    `- **<label>**:` is already rendered — replace only the placeholder).
-
-You **must not** modify any other content in `rendered_comment`. Do not
-re-evaluate checks that already have a deterministic status. Do not add
-or remove packages.
-
-## Step 2 — Resolve each `needs_agent` check
-
-For each `package` in `packages`:
-
-For each `(check_kind, result)` in `package.checks` where
-`result.status == "needs_agent"`:
-
-1. Look up `## Check kind: <check_kind>` in the **Check instructions**
-   section below.
-2. **If no matching section exists**: emit a single `add_comment` whose
-   body is:
-
-   ```
-   <!-- requirements-check -->
-   ## Check requirements
-
-   ❌ Internal error: the deterministic artifact contains a check kind
-   (`<check_kind>` on package `<pkg-name>`) that this workflow has no
-   instructions for. Update `.github/workflows/check-requirements.md`
-   to add a matching `## Check kind: <check_kind>` section, or remove
-   the kind from the deterministic stage.
-   ```
-
-   Then stop. **Do not improvise** a verdict for an unknown check kind.
-3. Otherwise, follow the instructions in that section. They tell you
-   which icon (✅/⚠️/❌) and one-line explanation to produce.
-
-## Step 3 — Post the comment
-
-1. Replace every `{{CHECK_CELL:…}}` and `{{CHECK_DETAIL:…}}` placeholder
-   in `rendered_comment` with the resolved value.
-2. Emit the resulting markdown using `add_comment` — set `body` to the
-   merged `rendered_comment` verbatim (the leading
-   `<!-- requirements-check -->` marker must be preserved). The PR
-   target is already set by the workflow; do not pass `item_number`.
-
-If the artifact's top-level `needs_agent` is `false` (no checks need
-you), emit `rendered_comment` unchanged.
-
-## Check instructions
-
-### Check kind: `repo_public`
-
-Verify that the package's source repository is publicly reachable.
-
-1. Read `package.repo_url`.
-2. Use the `web-fetch` tool to GET that URL.
-3. Decide the verdict:
-   - HTTP 200, returns a public repository page → ✅
-     `<repo_url> is publicly accessible.`
-   - HTTP 4xx/5xx, or the response redirects to a login / sign-in page →
-     ❌ `Source repository at <repo_url> is not publicly accessible.
-     Home Assistant requires all dependencies to have publicly available
-     source code.`
-   - Any other inconclusive result → ⚠️ with a one-line description.
-
-If `repo_public` resolves to ❌ for a package, **also** mark that
-package's `release_pipeline` cell/detail as `—` (em dash) and explain
-`Skipped because the source repository is not publicly accessible.` —
-because the release pipeline cannot be inspected without a public repo.
-
-### Check kind: `pr_link`
-
-Verify the PR description contains the right link for the change.
-
-1. Fetch the PR body via the GitHub MCP tool, using the `pr_number`
-   field from the artifact.
-2. Extract all URLs from the body.
-3. For a **new package** (`package.old_version` is `null`):
-   - The PR body must contain a URL that points at `package.repo_url`
-     (any sub-path of the same `owner/repo` on the same host is
-     acceptable). A PyPI link is **not** sufficient.
-   - ✅ if such a URL is present.
-   - ❌ otherwise:
-     `PR description must link to the source repository at <repo_url>.
-     A PyPI page link is not sufficient.`
-4. For a **version bump** (`package.old_version` is not `null`):
-   - The PR body must contain a URL on the same host as
-     `package.repo_url` that references **both** `package.old_version`
-     and `package.new_version` (e.g. a GitHub compare URL
-     `compare/vX...vY`, a release / changelog URL containing both
-     versions, etc.).
-   - ✅ if such a URL is present and the versions match the actual bump.
-   - ❌ otherwise:
-     `PR description should link to a changelog or compare URL on
-     <repo_url> that mentions both <old_version> and <new_version>.`
-
-### Check kind: `release_pipeline`
-
-Inspect the upstream project's release / publish CI pipeline.
-
-For each package needing inspection, determine the source repository
-host from `package.repo_url`, then apply the corresponding checklist.
-
-#### GitHub repositories (`github.com`)
-
-1. List workflows: `GET /repos/{owner}/{repo}/actions/workflows`.
-2. Identify any workflow whose name or filename suggests publishing to
-   PyPI (`release`, `publish`, `pypi`, or `deploy`).
-3. Fetch the workflow file and check:
-   - **Trigger sanity**: triggered by `push` to tags,
-     `release: published`, or `workflow_run` on a release job —
-     **not** solely `workflow_dispatch` with no environment-protection
-     guard.
-   - **OIDC / Trusted Publisher**: look for `id-token: write` and one of
-     `pypa/gh-action-pypi-publish`, `actions/attest-build-provenance`,
-     or `TWINE_PASSWORD` from a static `secrets.PYPI_TOKEN`.
-   - **No manual upload bypass**: no ungated `twine upload` or
-     `pip upload`.
-4. Verdict:
-   - ✅ if OIDC + sane triggers + no bypass.
-   - ⚠️ if static token but version bump, or details unclear.
-   - ❌ if static token on a new package, or only-manual triggers with
-     no environment protection.
-
-#### GitLab repositories (`gitlab.com` or self-hosted GitLab)
-
-1. Resolve the project ID via
-   `GET https://gitlab.com/api/v4/projects/{url-encoded-namespace-and-name}`.
-2. Fetch `.gitlab-ci.yml` via
-   `GET https://gitlab.com/api/v4/projects/{id}/repository/files/.gitlab-ci.yml/raw?ref=HEAD`.
-3. Apply the same conceptual checks: tag-only / protected-branch
-   triggers, GitLab OIDC `id_tokens` or CI/CD protected `PYPI_TOKEN`, no
-   ungated `twine upload`. Same verdict rules as GitHub.
-
-#### Other code hosting providers (Bitbucket, Codeberg, Gitea, Sourcehut, …)
-
-1. Use `web-fetch` to retrieve any visible CI configuration
-   (`.circleci/config.yml`, `Jenkinsfile`, `azure-pipelines.yml`,
-   `bitbucket-pipelines.yml`, `.builds/*.yml`).
-2. Apply the conceptual checks: automated triggers, CI-injected
-   credentials, no manual `twine upload`.
-3. If no CI config can be retrieved: ⚠️ `Release pipeline could not be
-   inspected; hosting provider is not GitHub or GitLab.`
-
-## Notes
-
- Be constructive and helpful. Reference the inspected workflow / CI
-  file by URL where useful so the contributor can fix the issue.
- The dedup of the requirements-check comment is handled by gh-aw's
-  `add_comment` safe-output via the `<!-- requirements-check -->`
-  marker on the first line of `rendered_comment`.
- If the deterministic workflow concluded with a non-success status,
-  this workflow's `if:` guard on `Download deterministic-results
-  artifact` skipped the download. If you find no file at
-  `/tmp/gh-aw/deterministic/results.json`, emit nothing — the post-step
-  verification is also gated and will not complain.
@@ -38,8 +38,9 @@ on:

 env:
  CACHE_VERSION: 3
+  UV_CACHE_VERSION: 1
  MYPY_CACHE_VERSION: 1
-  HA_SHORT_VERSION: "2026.6"
+  HA_SHORT_VERSION: "2026.5"
  ADDITIONAL_PYTHON_VERSIONS: "[]"
  # 10.3 is the oldest supported version
  # - 10.3.32 is the version currently shipped with Synology (as of 17 Feb 2022)
@@ -281,7 +282,7 @@ jobs:
          echo "::add-matcher::.github/workflows/matchers/check-executables-have-shebangs.json"
          echo "::add-matcher::.github/workflows/matchers/codespell.json"
      - name: Run prek
-        uses: j178/prek-action@6ad80277337ad479fe43bd70701c3f7f8aa74db3 # v2.0.3
+        uses: j178/prek-action@cbc2f23eb5539cf20d82d1aabd0d0ecbcc56f4e3 # v2.0.2
        env:
          PREK_SKIP: no-commit-to-branch,mypy,pylint,gen_requirements_all,hassfest,hassfest-metadata,hassfest-mypy-config,zizmor
          RUFF_OUTPUT_FORMAT: github
@@ -302,7 +303,7 @@ jobs:
        with:
          persist-credentials: false
      - name: Run zizmor
-        uses: j178/prek-action@6ad80277337ad479fe43bd70701c3f7f8aa74db3 # v2.0.3
+        uses: j178/prek-action@cbc2f23eb5539cf20d82d1aabd0d0ecbcc56f4e3 # v2.0.2
        with:
          extra-args: --all-files zizmor

@@ -357,33 +358,32 @@ jobs:
        with:
          python-version: ${{ matrix.python-version }}
          check-latest: true
+      - name: Generate partial uv restore key
+        id: generate-uv-key
+        run: |
+          uv_version=$(cat requirements.txt | grep uv | cut -d '=' -f 3)
+          echo "version=${uv_version}" >> $GITHUB_OUTPUT
+          echo "key=uv-${UV_CACHE_VERSION}-${uv_version}-${HA_SHORT_VERSION}-$(date -u '+%Y-%m-%dT%H:%M:%s')" >> $GITHUB_OUTPUT
      - name: Restore base Python virtual environment
        id: cache-venv
-        uses: actions/cache/restore@27d5ce7f107fe9357f9df03efb73ab90386fccae # v5.0.5
+        uses: actions/cache@27d5ce7f107fe9357f9df03efb73ab90386fccae # v5.0.5
        with:
          path: venv
          key: >-
            ${{ runner.os }}-${{ runner.arch }}-${{ steps.python.outputs.python-version }}-${{
            needs.info.outputs.python_cache_key }}
-      - name: Generate partial uv restore key
-        if: steps.cache-venv.outputs.cache-hit != 'true'
-        id: generate-uv-key
-        env:
-          RUNNER_OS: ${{ runner.os }}
-          RUNNER_ARCH: ${{ runner.arch }}
-          PYTHON_VERSION: ${{ steps.python.outputs.python-version }}
-          HASH_FILES: ${{ hashFiles('requirements.txt', 'requirements_all.txt', 'requirements_test.txt', 'homeassistant/package_constraints.txt') }}
-        run: |
-          partial_key="${RUNNER_OS}-${RUNNER_ARCH}-${PYTHON_VERSION}-uv-"
-          echo "partial_key=${partial_key}" >> $GITHUB_OUTPUT
-          echo "full_key=${partial_key}${HASH_FILES}" >> $GITHUB_OUTPUT
      - name: Restore uv wheel cache
        if: steps.cache-venv.outputs.cache-hit != 'true'
-        uses: actions/cache/restore@27d5ce7f107fe9357f9df03efb73ab90386fccae # v5.0.5
+        uses: actions/cache@27d5ce7f107fe9357f9df03efb73ab90386fccae # v5.0.5
        with:
          path: ${{ env.UV_CACHE_DIR }}
-          key: ${{ steps.generate-uv-key.outputs.full_key }}
-          restore-keys: ${{ steps.generate-uv-key.outputs.partial_key }}
+          key: >-
+            ${{ runner.os }}-${{ runner.arch }}-${{ steps.python.outputs.python-version }}-${{
+            steps.generate-uv-key.outputs.key }}
+          restore-keys: |
+            ${{ runner.os }}-${{ runner.arch }}-${{ steps.python.outputs.python-version }}-uv-${{
+            env.UV_CACHE_VERSION }}-${{ steps.generate-uv-key.outputs.version }}-${{
+            env.HA_SHORT_VERSION }}-
      - name: Check if apt cache exists
        id: cache-apt-check
        uses: actions/cache@27d5ce7f107fe9357f9df03efb73ab90386fccae # v5.0.5
@@ -398,7 +398,6 @@ jobs:
        if: |
          steps.cache-venv.outputs.cache-hit != 'true'
          || steps.cache-apt-check.outputs.cache-hit != 'true'
-        id: install-os-deps
        timeout-minutes: 10
        env:
          APT_CACHE_HIT: ${{ steps.cache-apt-check.outputs.cache-hit }}
@@ -432,10 +431,7 @@ jobs:
            sudo chmod -R 755 ${APT_CACHE_BASE}
          fi
      - name: Save apt cache
-        if: |
-          always()
-          && steps.cache-apt-check.outputs.cache-hit != 'true'
-          && steps.install-os-deps.outcome == 'success'
+        if: steps.cache-apt-check.outputs.cache-hit != 'true'
        uses: actions/cache/save@27d5ce7f107fe9357f9df03efb73ab90386fccae # v5.0.5
        with:
          path: |
@@ -445,7 +441,6 @@ jobs:
            ${{ runner.os }}-${{ runner.arch }}-${{ needs.info.outputs.apt_cache_key }}
      - name: Create Python virtual environment
        if: steps.cache-venv.outputs.cache-hit != 'true'
-        id: create-venv
        run: |
          python -m venv venv
          . venv/bin/activate
@@ -453,7 +448,8 @@ jobs:
          pip install "$(grep '^uv' < requirements.txt)"
          uv pip install -U "pip>=25.2"
          uv pip install -r requirements.txt
-          uv pip install -r requirements_all.txt -r requirements_test.txt
+          python -m script.gen_requirements_all ci
+          uv pip install -r requirements_all_pytest.txt -r requirements_test.txt
          uv pip install -e . --config-settings editable_mode=compat
      - name: Dump pip freeze
        run: |
@@ -469,29 +465,12 @@ jobs:
          overwrite: true
      - name: Remove pip_freeze
        run: rm pip_freeze.txt
+      - name: Remove generated requirements_all
+        if: steps.cache-venv.outputs.cache-hit != 'true'
+        run: rm requirements_all_pytest.txt requirements_all_wheels_*.txt
      - name: Check dirty
        run: |
          ./script/check_dirty
-      - name: Prune uv cache
-        if: steps.cache-venv.outputs.cache-hit != 'true'
-        id: prune-uv-cache
-        run: |
-          . venv/bin/activate
-          uv cache prune --ci
-      - name: Save uv wheel cache
-        if: steps.cache-venv.outputs.cache-hit != 'true'
-        uses: actions/cache/save@27d5ce7f107fe9357f9df03efb73ab90386fccae # v5.0.5
-        with:
-          path: ${{ env.UV_CACHE_DIR }}
-          key: ${{ steps.generate-uv-key.outputs.full_key }}
-      - name: Save base Python virtual environment
-        if: always() && steps.create-venv.outcome == 'success'
-        uses: actions/cache/save@27d5ce7f107fe9357f9df03efb73ab90386fccae # v5.0.5
-        with:
-          path: venv
-          key: >-
-            ${{ runner.os }}-${{ runner.arch }}-${{ steps.python.outputs.python-version }}-${{
-            needs.info.outputs.python_cache_key }}

  hassfest:
    name: Check hassfest
@@ -632,7 +611,7 @@ jobs:
        with:
          persist-credentials: false
      - name: Dependency review
-        uses: actions/dependency-review-action@a1d282b36b6f3519aa1f3fc636f609c47dddb294 # v5.0.0
+        uses: actions/dependency-review-action@2031cfc080254a8a887f58cffee85186f0e49e48 # v4.9.0
        with:
          license-check: false # We use our own license audit checks

@@ -853,7 +832,7 @@ jobs:
        run: |
          . venv/bin/activate
          python --version
-          mypy --num-workers=4 homeassistant pylint
+          mypy homeassistant pylint
      - name: Run mypy (partially)
        if: needs.info.outputs.test_full_suite == 'false'
        shell: bash
@@ -862,7 +841,7 @@ jobs:
        run: |
          . venv/bin/activate
          python --version
-          mypy --num-workers=4 $(printf "homeassistant/components/%s " ${INTEGRATIONS_GLOB})
+          mypy $(printf "homeassistant/components/%s " ${INTEGRATIONS_GLOB})

  prepare-pytest-full:
    name: Split tests for full run
@@ -1088,7 +1067,6 @@ jobs:
        options: >-
          --health-cmd="if command -v mariadb-admin >/dev/null; then mariadb-admin ping -uroot -ppassword; else mysqladmin ping -uroot -ppassword; fi"
          --health-interval=5s --health-timeout=2s --health-retries=3
-          --tmpfs /var/lib/mysql:size=2g,mode=0750
    needs:
      - info
      - base
@@ -1246,10 +1224,7 @@ jobs:
          - 5432:5432
        env:
          POSTGRES_PASSWORD: password
-        options: >-
-          --health-cmd="pg_isready -hlocalhost -Upostgres"
-          --health-interval=5s --health-timeout=2s --health-retries=3
-          --tmpfs /var/lib/postgresql/data:size=2g,mode=0700
+        options: --health-cmd="pg_isready -hlocalhost -Upostgres" --health-interval=5s --health-timeout=2s --health-retries=3
    needs:
      - info
      - base
@@ -28,11 +28,11 @@ jobs:
          persist-credentials: false

      - name: Initialize CodeQL
-        uses: github/codeql-action/init@68bde559dea0fdcac2102bfdf6230c5f70eb485e # v4.35.4
+        uses: github/codeql-action/init@c10b8064de6f491fea524254123dbe5e09572f13 # v4.35.1
        with:
          languages: python

      - name: Perform CodeQL Analysis
-        uses: github/codeql-action/analyze@68bde559dea0fdcac2102bfdf6230c5f70eb485e # v4.35.4
+        uses: github/codeql-action/analyze@c10b8064de6f491fea524254123dbe5e09572f13 # v4.35.1
        with:
          category: "/language:python"
@@ -236,7 +236,7 @@ jobs:
      - name: Detect duplicates using AI
        id: ai_detection
        if: steps.extract.outputs.should_continue == 'true' && steps.fetch_similar.outputs.has_similar == 'true'
-        uses: actions/ai-inference@17ff458cb182449bbb2e43701fcd98f6af8f6570 # v2.1.0
+        uses: actions/ai-inference@e09e65981758de8b2fdab13c2bfb7c7d5493b0b6 # v2.0.7
        with:
          model: openai/gpt-4o
          system-prompt: |
@@ -62,7 +62,7 @@ jobs:
      - name: Detect language using AI
        id: ai_language_detection
        if: steps.detect_language.outputs.should_continue == 'true'
-        uses: actions/ai-inference@17ff458cb182449bbb2e43701fcd98f6af8f6570 # v2.1.0
+        uses: actions/ai-inference@e09e65981758de8b2fdab13c2bfb7c7d5493b0b6 # v2.0.7
        with:
          model: openai/gpt-4o-mini
          system-prompt: |
@@ -1,6 +1,6 @@
 repos:
  - repo: https://github.com/astral-sh/ruff-pre-commit
-    rev: v0.15.13
+    rev: v0.15.10
    hooks:
      - id: ruff-check
        args:
@@ -18,12 +18,11 @@ repos:
        exclude_types: [csv, json, html]
        exclude: ^tests/fixtures/|homeassistant/generated/|tests/components/.*/snapshots/
  - repo: https://github.com/zizmorcore/zizmor-pre-commit
-    rev: v1.24.1
+    rev: v1.24.0
    hooks:
      - id: zizmor
        args:
          - --pedantic
-        exclude: ^\.github/workflows/.*\.lock\.yml$
  - repo: https://github.com/pre-commit/pre-commit-hooks
    rev: v6.0.0
    hooks:
@@ -47,7 +46,6 @@ repos:
        additional_dependencies:
          - prettier@3.6.2
          - prettier-plugin-sort-json@4.2.0
-        exclude: ^\.github/workflows/.*\.lock\.yml$
  - repo: https://github.com/cdce8p/python-typing-update
    rev: v0.6.0
    hooks:
@@ -1 +1 @@
-3.14.5
+3.14.2
@@ -139,7 +139,6 @@ homeassistant.components.cambridge_audio.*
 homeassistant.components.camera.*
 homeassistant.components.canary.*
 homeassistant.components.casper_glow.*
-homeassistant.components.centriconnect.*
 homeassistant.components.cert_expiry.*
 homeassistant.components.clickatell.*
 homeassistant.components.clicksend.*
@@ -156,7 +155,6 @@ homeassistant.components.counter.*
 homeassistant.components.cover.*
 homeassistant.components.cpuspeed.*
 homeassistant.components.crownstone.*
-homeassistant.components.data_grand_lyon.*
 homeassistant.components.date.*
 homeassistant.components.datetime.*
 homeassistant.components.deako.*
@@ -250,7 +248,6 @@ homeassistant.components.gpsd.*
 homeassistant.components.greeneye_monitor.*
 homeassistant.components.group.*
 homeassistant.components.guardian.*
-homeassistant.components.guntamatic.*
 homeassistant.components.habitica.*
 homeassistant.components.hardkernel.*
 homeassistant.components.hardware.*
@@ -298,7 +295,6 @@ homeassistant.components.imap.*
 homeassistant.components.imgw_pib.*
 homeassistant.components.immich.*
 homeassistant.components.incomfort.*
-homeassistant.components.indevolt.*
 homeassistant.components.inels.*
 homeassistant.components.infrared.*
 homeassistant.components.input_button.*
@@ -358,7 +354,6 @@ homeassistant.components.lunatone.*
 homeassistant.components.lutron.*
 homeassistant.components.madvr.*
 homeassistant.components.manual.*
-homeassistant.components.marantz_infrared.*
 homeassistant.components.mastodon.*
 homeassistant.components.matrix.*
 homeassistant.components.matter.*
@@ -425,11 +420,9 @@ homeassistant.components.opower.*
 homeassistant.components.oralb.*
 homeassistant.components.otbr.*
 homeassistant.components.otp.*
-homeassistant.components.ouman_eh_800.*
 homeassistant.components.overkiz.*
 homeassistant.components.overseerr.*
 homeassistant.components.p1_monitor.*
-homeassistant.components.paj_gps.*
 homeassistant.components.panel_custom.*
 homeassistant.components.paperless_ngx.*
 homeassistant.components.peblar.*
@@ -449,7 +442,6 @@ homeassistant.components.private_ble_device.*
 homeassistant.components.prometheus.*
 homeassistant.components.proximity.*
 homeassistant.components.prusalink.*
-homeassistant.components.ptdevices.*
 homeassistant.components.pure_energie.*
 homeassistant.components.purpleair.*
 homeassistant.components.pushbullet.*
@@ -492,7 +484,6 @@ homeassistant.components.rss_feed_template.*
 homeassistant.components.russound_rio.*
 homeassistant.components.ruuvi_gateway.*
 homeassistant.components.ruuvitag_ble.*
-homeassistant.components.samsung_infrared.*
 homeassistant.components.samsungtv.*
 homeassistant.components.saunum.*
 homeassistant.components.scene.*
@@ -608,7 +599,6 @@ homeassistant.components.vallox.*
 homeassistant.components.valve.*
 homeassistant.components.velbus.*
 homeassistant.components.velux.*
-homeassistant.components.victron_gx.*
 homeassistant.components.vivotek.*
 homeassistant.components.vlc_telnet.*
 homeassistant.components.vodafone_station.*
@@ -1,6 +1,5 @@
 ignore: |
  tests/fixtures/core/config/yaml_errors/
-  .github/workflows/*.lock.yml
 rules:
  braces:
    level: error
@@ -6,36 +6,22 @@ This repository contains the core of Home Assistant, a Python 3 based home autom

 - **Do NOT amend, squash, or rebase commits that have already been pushed to the PR branch after the PR is opened** - Reviewers need to follow the commit history, as well as see what changed since their last review

-## Pull Requests
-
- When opening a pull request, use the repository's PR template (`.github/PULL_REQUEST_TEMPLATE.md`). NEVER REMOVE ANYTHING from the template.
- Do not remove checkboxes that are not checked — leave all unchecked checkboxes in place so reviewers can see which options were not selected.
-
 ## Development Commands

- When entering a new environment or worktree, run `script/setup` to set up the virtual environment with all development dependencies (pylint, pre-commit hooks, etc.). This is required before committing.
- .vscode/tasks.json contains useful commands used for development.
+.vscode/tasks.json contains useful commands used for development.

 ## Python Syntax Notes

- Home Assistant officially supports Python 3.14 as its minimum version. Do not flag syntax or features that require Python 3.14 as issues, and do not suggest workarounds for older Python versions.
- Python 3.14 explicitly allows `except TypeA, TypeB:` without parentheses. Never flag this as an issue.
- Python 3.14 evaluates annotations lazily (PEP 649). Forward references in annotations do not need to be quoted — annotations can reference names defined later in the module without quoting them or using `from __future__ import annotations`. Do not flag unquoted forward references in annotations as issues.
+- Python 3.14 explicitly allows `except TypeA, TypeB:` without parentheses.

 ## Testing

- Use `uv run pytest` to run tests
- After modifying `strings.json` for an integration, regenerate the English translation file before running tests: `.venv/bin/python3 -m script.translations develop --integration <integration_name>`. Tests load translations from the generated `translations/en.json`, not directly from `strings.json`.
- When writing or modifying tests, ensure all test function parameters have type annotations.
- Prefer concrete types (for example, `HomeAssistant`, `MockConfigEntry`, etc.) over `Any`.
- Prefer `@pytest.mark.usefixtures` over arguments, if the argument is not going to be used.
- Avoid using conditions/branching in tests. Instead, either split tests or adjust the test parametrization to cover all cases without branching.
- If multiple tests share most of their code, use `pytest.mark.parametrize` to merge them into a single parameterized test instead of duplicating the body. Use `pytest.param` with an `id` parameter to name the test cases clearly.
- We use Syrupy for snapshot testing. Leverage `.ambr` snapshots instead of repetitive and exhaustive generation of test data within Python code itself.
+When writing or modifying tests, ensure all test function parameters have type annotations.
+Prefer concrete types (for example, `HomeAssistant`, `MockConfigEntry`, etc.) over `Any`.

 ## Good practices

- Integrations with Platinum or Gold level in the Integration Quality Scale reflect a high standard of code quality and maintainability. When looking for examples of something, these are good places to start. The level is indicated in the manifest.json of the integration.
- When reviewing entity actions, do not suggest extra defensive checks for input fields that are already validated by Home Assistant's service/action schemas and entity selection filters. Suggest additional guards only when data bypasses those validators or is transformed into a less-safe form.
- When validation guarantees a dict key exists, prefer direct key access (`data["key"]`) instead of `.get("key")` so contract violations are surfaced instead of silently masked.
- Do not add comments that just restate the code on the following line(s) (e.g. `# Check if initialized` above `if self.initialized:`). Comments should only explain why — non-obvious constraints, surprising behavior, or workarounds — never what.
+Integrations with Platinum or Gold level in the Integration Quality Scale reflect a high standard of code quality and maintainability. When looking for examples of something, these are good places to start. The level is indicated in the manifest.json of the integration.
+
+When reviewing entity actions, do not suggest extra defensive checks for input fields that are already validated by Home Assistant's service/action schemas and entity selection filters. Suggest additional guards only when data bypasses those validators or is transformed into a less-safe form.
+When validation guarantees a dict key exists, prefer direct key access (`data["key"]`) instead of `.get("key")` so contract violations are surfaced instead of silently masked.
@@ -68,8 +68,6 @@ CLAUDE.md @home-assistant/core
 /tests/components/agent_dvr/ @ispysoftware
 /homeassistant/components/ai_task/ @home-assistant/core
 /tests/components/ai_task/ @home-assistant/core
-/homeassistant/components/aidot/ @s1eedz @HongBryan
-/tests/components/aidot/ @s1eedz @HongBryan
 /homeassistant/components/air_quality/ @home-assistant/core
 /tests/components/air_quality/ @home-assistant/core
 /homeassistant/components/airgradient/ @airgradienthq @joostlek
@@ -198,7 +196,6 @@ CLAUDE.md @home-assistant/core
 /homeassistant/components/autoskope/ @mcisk
 /tests/components/autoskope/ @mcisk
 /homeassistant/components/avea/ @pattyland
-/tests/components/avea/ @pattyland
 /homeassistant/components/awair/ @ahayworth @ricohageman
 /tests/components/awair/ @ahayworth @ricohageman
 /homeassistant/components/aws_s3/ @tomasbedrich
@@ -291,16 +288,12 @@ CLAUDE.md @home-assistant/core
 /tests/components/cast/ @emontnemery
 /homeassistant/components/ccm15/ @ocalvo
 /tests/components/ccm15/ @ocalvo
-/homeassistant/components/centriconnect/ @gresrun
-/tests/components/centriconnect/ @gresrun
 /homeassistant/components/cert_expiry/ @jjlawren
 /tests/components/cert_expiry/ @jjlawren
 /homeassistant/components/chacon_dio/ @cnico
 /tests/components/chacon_dio/ @cnico
 /homeassistant/components/chess_com/ @joostlek
 /tests/components/chess_com/ @joostlek
-/homeassistant/components/cielo_home/ @ihsan-cielo @mudasar-cielo
-/tests/components/cielo_home/ @ihsan-cielo @mudasar-cielo
 /homeassistant/components/cisco_ios/ @fbradyirl
 /homeassistant/components/cisco_mobility_express/ @fbradyirl
 /homeassistant/components/cisco_webex_teams/ @fbradyirl
@@ -352,8 +345,6 @@ CLAUDE.md @home-assistant/core
 /tests/components/cync/ @Kinachi249
 /homeassistant/components/daikin/ @fredrike
 /tests/components/daikin/ @fredrike
-/homeassistant/components/data_grand_lyon/ @Crocmagnon
-/tests/components/data_grand_lyon/ @Crocmagnon
 /homeassistant/components/date/ @home-assistant/core
 /tests/components/date/ @home-assistant/core
 /homeassistant/components/datetime/ @home-assistant/core
@@ -409,8 +400,6 @@ CLAUDE.md @home-assistant/core
 /tests/components/dnsip/ @gjohansson-ST
 /homeassistant/components/door/ @home-assistant/core
 /tests/components/door/ @home-assistant/core
-/homeassistant/components/doorbell/ @home-assistant/core
-/tests/components/doorbell/ @home-assistant/core
 /homeassistant/components/doorbird/ @oblogic7 @bdraco @flacjacket
 /tests/components/doorbird/ @oblogic7 @bdraco @flacjacket
 /homeassistant/components/dormakaba_dkey/ @emontnemery
@@ -697,8 +686,6 @@ CLAUDE.md @home-assistant/core
 /tests/components/growatt_server/ @johanzander
 /homeassistant/components/guardian/ @bachya
 /tests/components/guardian/ @bachya
-/homeassistant/components/guntamatic/ @JensTimmerman
-/tests/components/guntamatic/ @JensTimmerman
 /homeassistant/components/habitica/ @tr4nt0r
 /tests/components/habitica/ @tr4nt0r
 /homeassistant/components/hanna/ @bestycame
@@ -769,8 +756,6 @@ CLAUDE.md @home-assistant/core
 /tests/components/homewizard/ @DCSBL
 /homeassistant/components/honeywell/ @rdfurman @mkmer
 /tests/components/honeywell/ @rdfurman @mkmer
-/homeassistant/components/honeywell_string_lights/ @balloob
-/tests/components/honeywell_string_lights/ @balloob
 /homeassistant/components/hr_energy_qube/ @MattieGit
 /tests/components/hr_energy_qube/ @MattieGit
 /homeassistant/components/html5/ @alexyao2015 @tr4nt0r
@@ -862,8 +847,8 @@ CLAUDE.md @home-assistant/core
 /tests/components/input_select/ @home-assistant/core
 /homeassistant/components/input_text/ @home-assistant/core
 /tests/components/input_text/ @home-assistant/core
-/homeassistant/components/insteon/ @teharris1 @ssyrell
-/tests/components/insteon/ @teharris1 @ssyrell
+/homeassistant/components/insteon/ @teharris1
+/tests/components/insteon/ @teharris1
 /homeassistant/components/integration/ @dgomes
 /tests/components/integration/ @dgomes
 /homeassistant/components/intelliclima/ @dvdinth
@@ -983,8 +968,8 @@ CLAUDE.md @home-assistant/core
 /tests/components/lektrico/ @lektrico
 /homeassistant/components/letpot/ @jpelgrom
 /tests/components/letpot/ @jpelgrom
-/homeassistant/components/lg_infrared/ @abmantis
-/tests/components/lg_infrared/ @abmantis
+/homeassistant/components/lg_infrared/ @home-assistant/core
+/tests/components/lg_infrared/ @home-assistant/core
 /homeassistant/components/lg_netcast/ @Drafteed @splinter98
 /tests/components/lg_netcast/ @Drafteed @splinter98
 /homeassistant/components/lg_thinq/ @LG-ThinQ-Integration
@@ -1047,8 +1032,6 @@ CLAUDE.md @home-assistant/core
 /tests/components/lyric/ @timmo001
 /homeassistant/components/madvr/ @iloveicedgreentea
 /tests/components/madvr/ @iloveicedgreentea
-/homeassistant/components/marantz_infrared/ @balloob
-/tests/components/marantz_infrared/ @balloob
 /homeassistant/components/mastodon/ @fabaff @andrew-codechimp
 /tests/components/mastodon/ @fabaff @andrew-codechimp
 /homeassistant/components/matrix/ @PaarthShah
@@ -1105,8 +1088,6 @@ CLAUDE.md @home-assistant/core
 /tests/components/minecraft_server/ @elmurato @zachdeibert
 /homeassistant/components/minio/ @tkislan
 /tests/components/minio/ @tkislan
-/homeassistant/components/mitsubishi_comfort/ @nikolairahimi
-/tests/components/mitsubishi_comfort/ @nikolairahimi
 /homeassistant/components/moat/ @bdraco
 /tests/components/moat/ @bdraco
 /homeassistant/components/mobile_app/ @home-assistant/core
@@ -1218,8 +1199,6 @@ CLAUDE.md @home-assistant/core
 /tests/components/notify_events/ @matrozov @papajojo
 /homeassistant/components/notion/ @bachya
 /tests/components/notion/ @bachya
-/homeassistant/components/novy_cooker_hood/ @piitaya
-/tests/components/novy_cooker_hood/ @piitaya
 /homeassistant/components/nrgkick/ @andijakl
 /tests/components/nrgkick/ @andijakl
 /homeassistant/components/nsw_fuel_station/ @nickw444
@@ -1256,8 +1235,6 @@ CLAUDE.md @home-assistant/core
 /homeassistant/components/ollama/ @synesthesiam
 /tests/components/ollama/ @synesthesiam
 /homeassistant/components/ombi/ @larssont
-/homeassistant/components/omie/ @luuuis
-/tests/components/omie/ @luuuis
 /homeassistant/components/onboarding/ @home-assistant/core
 /tests/components/onboarding/ @home-assistant/core
 /homeassistant/components/ondilo_ico/ @JeromeHXP
@@ -1276,8 +1253,6 @@ CLAUDE.md @home-assistant/core
 /tests/components/open_meteo/ @frenck
 /homeassistant/components/open_router/ @joostlek @ab3lson
 /tests/components/open_router/ @joostlek @ab3lson
-/homeassistant/components/openai_conversation/ @Shulyaka
-/tests/components/openai_conversation/ @Shulyaka
 /homeassistant/components/opendisplay/ @g4bri3lDev
 /tests/components/opendisplay/ @g4bri3lDev
 /homeassistant/components/openerz/ @misialq
@@ -1311,8 +1286,6 @@ CLAUDE.md @home-assistant/core
 /tests/components/osoenergy/ @osohotwateriot
 /homeassistant/components/otbr/ @home-assistant/core
 /tests/components/otbr/ @home-assistant/core
-/homeassistant/components/ouman_eh_800/ @Markus98
-/tests/components/ouman_eh_800/ @Markus98
 /homeassistant/components/ourgroceries/ @OnFreund
 /tests/components/ourgroceries/ @OnFreund
 /homeassistant/components/overkiz/ @imicknl
@@ -1323,8 +1296,6 @@ CLAUDE.md @home-assistant/core
 /tests/components/ovo_energy/ @timmo001
 /homeassistant/components/p1_monitor/ @klaasnicolaas
 /tests/components/p1_monitor/ @klaasnicolaas
-/homeassistant/components/paj_gps/ @skipperro
-/tests/components/paj_gps/ @skipperro
 /homeassistant/components/palazzetti/ @dotvav
 /tests/components/palazzetti/ @dotvav
 /homeassistant/components/panel_custom/ @home-assistant/frontend
@@ -1397,8 +1368,6 @@ CLAUDE.md @home-assistant/core
 /tests/components/proxmoxve/ @Corbeno @erwindouna @CoMPaTech
 /homeassistant/components/ps4/ @ktnrg45
 /tests/components/ps4/ @ktnrg45
-/homeassistant/components/ptdevices/ @ParemTech-Inc @frogman85978
-/tests/components/ptdevices/ @ParemTech-Inc @frogman85978
 /homeassistant/components/pterodactyl/ @elmurato
 /tests/components/pterodactyl/ @elmurato
 /homeassistant/components/pure_energie/ @klaasnicolaas
@@ -1442,8 +1411,6 @@ CLAUDE.md @home-assistant/core
 /tests/components/radarr/ @tkdrob
 /homeassistant/components/radio_browser/ @frenck
 /tests/components/radio_browser/ @frenck
-/homeassistant/components/radio_frequency/ @home-assistant/core
-/tests/components/radio_frequency/ @home-assistant/core
 /homeassistant/components/radiotherm/ @vinnyfuria
 /tests/components/radiotherm/ @vinnyfuria
 /homeassistant/components/rainbird/ @konikvranik @allenporter
@@ -1512,8 +1479,8 @@ CLAUDE.md @home-assistant/core
 /tests/components/roku/ @ctalkington
 /homeassistant/components/romy/ @xeniter
 /tests/components/romy/ @xeniter
-/homeassistant/components/roomba/ @pschmitt @cyr-ius @shenxn
-/tests/components/roomba/ @pschmitt @cyr-ius @shenxn
+/homeassistant/components/roomba/ @pschmitt @cyr-ius @shenxn @Orhideous
+/tests/components/roomba/ @pschmitt @cyr-ius @shenxn @Orhideous
 /homeassistant/components/roon/ @pavoni
 /tests/components/roon/ @pavoni
 /homeassistant/components/route_b_smart_meter/ @SeraphicRav
@@ -1536,8 +1503,6 @@ CLAUDE.md @home-assistant/core
 /homeassistant/components/sabnzbd/ @shaiu @jpbede
 /tests/components/sabnzbd/ @shaiu @jpbede
 /homeassistant/components/saj/ @fredericvl
-/homeassistant/components/samsung_infrared/ @lmaertin
-/tests/components/samsung_infrared/ @lmaertin
 /homeassistant/components/samsungtv/ @chemelli74 @epenet
 /tests/components/samsungtv/ @chemelli74 @epenet
 /homeassistant/components/sanix/ @tomaszsluszniak
@@ -2014,8 +1979,8 @@ CLAUDE.md @home-assistant/core
 /tests/components/wled/ @frenck @mik-laj
 /homeassistant/components/wmspro/ @mback2k
 /tests/components/wmspro/ @mback2k
-/homeassistant/components/wolflink/ @adamkrol93 @EnjoyingM
-/tests/components/wolflink/ @adamkrol93 @EnjoyingM
+/homeassistant/components/wolflink/ @adamkrol93 @mtielen
+/tests/components/wolflink/ @adamkrol93 @mtielen
 /homeassistant/components/workday/ @fabaff @gjohansson-ST
 /tests/components/workday/ @fabaff @gjohansson-ST
 /homeassistant/components/worldclock/ @fabaff
@@ -2036,8 +2001,6 @@ CLAUDE.md @home-assistant/core
 /tests/components/xiaomi_miio/ @rytilahti @syssi @starkillerOG
 /homeassistant/components/xiaomi_tv/ @simse
 /homeassistant/components/xmpp/ @fabaff @flowolf
-/homeassistant/components/xthings_cloud/ @XthingsJacobs
-/tests/components/xthings_cloud/ @XthingsJacobs
 /homeassistant/components/yale/ @bdraco
 /tests/components/yale/ @bdraco
 /homeassistant/components/yale_smart_alarm/ @gjohansson-ST
@@ -2068,8 +2031,8 @@ CLAUDE.md @home-assistant/core
 /tests/components/zeroconf/ @bdraco
 /homeassistant/components/zerproc/ @emlove
 /tests/components/zerproc/ @emlove
-/homeassistant/components/zeversolar/ @kvanzuijlen @mhuiskes
-/tests/components/zeversolar/ @kvanzuijlen @mhuiskes
+/homeassistant/components/zeversolar/ @kvanzuijlen
+/tests/components/zeversolar/ @kvanzuijlen
 /homeassistant/components/zha/ @dmulcahey @adminiuga @puddly @TheJulianJES
 /tests/components/zha/ @dmulcahey @adminiuga @puddly @TheJulianJES
 /homeassistant/components/zimi/ @markhannon
@@ -1,5 +1,5 @@
 # syntax=docker/dockerfile@sha256:2780b5c3bab67f1f76c781860de469442999ed1a0d7992a5efdf2cffc0e3d769
-# Partly generated by hassfest.
+# Automatically generated by hassfest.
 #
 # To update, run python3 -m script.hassfest -p docker
 ARG BUILD_FROM
@@ -26,7 +26,7 @@ WORKDIR /usr/src
 COPY rootfs /

 # Add go2rtc binary
-COPY --from=ghcr.io/alexxit/go2rtc:1.9.14@sha256:675c318b23c06fd862a61d262240c9a63436b4050d177ffc68a32710d9e05bae /usr/local/bin/go2rtc /bin/go2rtc
+COPY --from=ghcr.io/alexxit/go2rtc@sha256:675c318b23c06fd862a61d262240c9a63436b4050d177ffc68a32710d9e05bae /usr/local/bin/go2rtc /bin/go2rtc

 ## Setup Home Assistant Core dependencies
 COPY --parents requirements.txt homeassistant/package_constraints.txt homeassistant/
@@ -1,5 +1,7 @@
 """Start Home Assistant."""

+from __future__ import annotations
+
 import argparse
 from contextlib import suppress
 import faulthandler
@@ -1,5 +1,7 @@
 """Provide an authentication layer for Home Assistant."""

+from __future__ import annotations
+
 import asyncio
 from collections import OrderedDict
 from collections.abc import Mapping
@@ -73,12 +75,10 @@ async def auth_manager_from_config(
        provider_hash[key] = provider

        if isinstance(provider, HassAuthProvider):
-            # Can be removed in 2026.7 with the legacy mode of
-            # homeassistant auth provider.
-            # We need to initialize the provider to create the repair
-            # if needed as otherwise the provider will be initialized
-            # on first use, which could be rare as users don't
-            # frequently change auth settings
+            # Can be removed in 2026.7 with the legacy mode of homeassistant auth provider
+            # We need to initialize the provider to create the repair if needed as otherwise
+            # the provider will be initialized on first use, which could be rare as users
+            # don't frequently change auth settings
            await provider.async_initialize()

    if module_configs:
@@ -1,5 +1,7 @@
 """Storage for auth models."""

+from __future__ import annotations
+
 from datetime import timedelta
 import hmac
 import itertools
@@ -5,6 +5,8 @@ we can cache the result of the decode of valid tokens
 to speed up the process.
 """

+from __future__ import annotations
+
 from collections.abc import Container, Iterable, Sequence
 from datetime import timedelta
 from functools import lru_cache
@@ -1,5 +1,7 @@
 """Pluggable auth modules for Home Assistant."""

+from __future__ import annotations
+
 import logging
 import types
 from typing import Any
@@ -1,5 +1,7 @@
 """Example auth module."""

+from __future__ import annotations
+
 from typing import Any

 import voluptuous as vol
@@ -3,6 +3,8 @@
 Sending HOTP through notify service
 """

+from __future__ import annotations
+
 import asyncio
 import logging
 from typing import Any, cast
@@ -1,5 +1,7 @@
 """Time-based One Time Password auth module."""

+from __future__ import annotations
+
 import asyncio
 from io import BytesIO
 from typing import Any, cast
@@ -1,5 +1,7 @@
 """Auth models."""

+from __future__ import annotations
+
 from datetime import datetime, timedelta
 from ipaddress import IPv4Address, IPv6Address
 import secrets
@@ -1,7 +1,8 @@
 """Permissions for Home Assistant."""

-from collections.abc import Callable, Iterable
-from typing import TYPE_CHECKING
+from __future__ import annotations
+
+from collections.abc import Callable

 import voluptuous as vol

@@ -12,9 +13,6 @@ from .models import PermissionLookup
 from .types import PolicyType
 from .util import test_all

-if TYPE_CHECKING:
-    from ..models import User
-
 POLICY_SCHEMA = vol.Schema({vol.Optional(CAT_ENTITIES): ENTITY_POLICY_SCHEMA})

 __all__ = [
@@ -24,21 +22,10 @@ __all__ = [
    "PermissionLookup",
    "PolicyPermissions",
    "PolicyType",
-    "filter_entity_ids_by_permission",
    "merge_policies",
 ]


-def filter_entity_ids_by_permission(
-    user: User, entity_ids: Iterable[str], key: str
-) -> list[str]:
-    """Filter entity IDs to those the user can access for the given policy key."""
-    if user.is_admin or user.permissions.access_all_entities(key):
-        return list(entity_ids)
-    check_entity = user.permissions.check_entity
-    return [entity_id for entity_id in entity_ids if check_entity(entity_id, key)]
-
-
 class AbstractPermissions:
    """Default permissions class."""

@@ -1,5 +1,7 @@
 """Entity permissions."""

+from __future__ import annotations
+
 from collections import OrderedDict
 from collections.abc import Callable

@@ -1,5 +1,7 @@
 """Permission for events."""

+from __future__ import annotations
+
 from typing import Any, Final

 from homeassistant.const import (
@@ -1,5 +1,7 @@
 """Merging of policies."""

+from __future__ import annotations
+
 from typing import cast

 from .types import CategoryType, PolicyType
@@ -1,5 +1,7 @@
 """Models for permissions."""

+from __future__ import annotations
+
 from typing import TYPE_CHECKING

 import attr
@@ -1,5 +1,7 @@
 """Helpers to deal with permissions."""

+from __future__ import annotations
+
 from collections.abc import Callable
 from functools import wraps
 from typing import cast
@@ -1,5 +1,7 @@
 """Auth providers for Home Assistant."""

+from __future__ import annotations
+
 from collections.abc import Mapping
 import logging
 import types
@@ -1,5 +1,7 @@
 """Auth provider that validates credentials via an external command."""

+from __future__ import annotations
+
 import asyncio
 from collections.abc import Mapping
 import logging
@@ -1,5 +1,7 @@
 """Home Assistant auth provider."""

+from __future__ import annotations
+
 import asyncio
 import base64
 from collections.abc import Mapping
@@ -120,10 +122,9 @@ class Data:
            if self.normalize_username(username, force_normalize=True) != username:
                logging.getLogger(__name__).warning(
                    (
-                        "Home Assistant auth provider is running in"
-                        " legacy mode because we detected usernames"
-                        " that are normalized (lowercase and without"
-                        " spaces). Please change the username: '%s'."
+                        "Home Assistant auth provider is running in legacy mode "
+                        "because we detected usernames that are normalized (lowercase and without spaces)."
+                        " Please change the username: '%s'."
                    ),
                    username,
                )
@@ -140,9 +141,7 @@ class Data:
                severity=ir.IssueSeverity.WARNING,
                translation_key="homeassistant_provider_not_normalized_usernames",
                translation_placeholders={
-                    "usernames": (
-                        f'- "{'"\n- "'.join(sorted(not_normalized_usernames))}"'
-                    )
+                    "usernames": f'- "{'"\n- "'.join(sorted(not_normalized_usernames))}"'
                },
                learn_more_url="homeassistant://config/users",
            )
@@ -1,5 +1,7 @@
 """Example auth provider."""

+from __future__ import annotations
+
 from collections.abc import Mapping
 import hmac

@@ -4,6 +4,8 @@ It shows list of users if access from trusted network.
 Abort login flow if not access from trusted network.
 """

+from __future__ import annotations
+
 from collections.abc import Mapping
 from ipaddress import (
    IPv4Address,
@@ -1,5 +1,7 @@
 """Home Assistant module to handle restoring backups."""

+from __future__ import annotations
+
 from collections.abc import Iterable
 from dataclasses import dataclass
 import json
@@ -60,10 +62,7 @@ def restore_backup_file_content(config_dir: Path) -> RestoreBackupFileContent |


 def _clear_configuration_directory(config_dir: Path, keep: Iterable[str]) -> None:
-    """Delete all files and directories in the config dir.
-
-    Entries in the keep list are preserved.
-    """
+    """Delete all files and directories in the config directory except entries in the keep list."""
    keep_paths = [config_dir.joinpath(path) for path in keep]
    entries_to_remove = sorted(
        entry for entry in config_dir.iterdir() if entry not in keep_paths
@@ -104,8 +103,7 @@ def _extract_backup(
            )
        ) > HA_VERSION:
            raise ValueError(
-                f"You need at least Home Assistant version"
-                f" {backup_meta_version} to restore this backup"
+                f"You need at least Home Assistant version {backup_meta_version} to restore this backup"
            )

        with securetar.SecureTarFile(
@@ -1,5 +1,7 @@
 """Provide methods to bootstrap a Home Assistant instance."""

+from __future__ import annotations
+
 import asyncio
 from collections import defaultdict
 import contextlib
@@ -17,8 +19,7 @@ from time import monotonic
 from typing import TYPE_CHECKING, Any

 # Import cryptography early since import openssl is not thread-safe
-# _frozen_importlib._DeadlockError: deadlock detected by
-# _ModuleLock('cryptography.hazmat.backends.openssl.backend')
+# _frozen_importlib._DeadlockError: deadlock detected by _ModuleLock('cryptography.hazmat.backends.openssl.backend')
 import cryptography.hazmat.backends.openssl.backend  # noqa: F401
 import voluptuous as vol
 import yarl
@@ -166,14 +167,10 @@ FRONTEND_INTEGRATIONS = {
    # visible in frontend
    "frontend",
 }
-# Stage 0 is divided into substages. Each substage has a name,
-# a set of integrations and a timeout.
-# The substage containing recorder should have no timeout, as it
-# could cancel a database migration.
-# Recorder freezes "recorder" timeout during a migration, but it
-# does not freeze other timeouts.
-# If we add timeouts to the frontend substages, we should make sure
-# they don't apply in recovery mode.
+# Stage 0 is divided into substages. Each substage has a name, a set of integrations and a timeout.
+# The substage containing recorder should have no timeout, as it could cancel a database migration.
+# Recorder freezes "recorder" timeout during a migration, but it does not freeze other timeouts.
+# If we add timeouts to the frontend substages, we should make sure they don't apply in recovery mode.
 STAGE_0_INTEGRATIONS = (
    # Load logging and http deps as soon as possible
    ("logging, http deps", LOGGING_AND_HTTP_DEPS_INTEGRATIONS, None),
@@ -1,5 +1,5 @@
 {
  "domain": "honeywell",
  "name": "Honeywell",
-  "integrations": ["lyric", "evohome", "honeywell", "honeywell_string_lights"]
+  "integrations": ["lyric", "evohome", "honeywell"]
 }
@@ -1,5 +0,0 @@
-{
-  "domain": "marantz",
-  "name": "Marantz",
-  "integrations": ["marantz", "marantz_infrared"]
-}
@@ -1,5 +0,0 @@
-{
-  "domain": "mitsubishi",
-  "name": "Mitsubishi",
-  "integrations": ["melcloud", "mitsubishi_comfort"]
-}
@@ -1,5 +1,5 @@
 {
  "domain": "samsung",
  "name": "Samsung",
-  "integrations": ["familyhub", "samsung_infrared", "samsungtv", "syncthru"]
+  "integrations": ["familyhub", "samsungtv", "syncthru"]
 }
@@ -1,5 +0,0 @@
-{
-  "domain": "sensereo",
-  "name": "Sensereo",
-  "iot_standards": ["matter"]
-}
@@ -1,5 +0,0 @@
-{
-  "domain": "zunzunbee",
-  "name": "Zunzunbee",
-  "iot_standards": ["zigbee"]
-}
@@ -1,5 +1,7 @@
 """Support for the Abode Security System."""

+from __future__ import annotations
+
 from dataclasses import dataclass, field
 from functools import partial
 from pathlib import Path
@@ -28,7 +30,7 @@ from homeassistant.exceptions import ConfigEntryAuthFailed, ConfigEntryNotReady
 from homeassistant.helpers import config_validation as cv
 from homeassistant.helpers.typing import ConfigType

-from .const import CONF_POLLING, DOMAIN, LOGGER
+from .const import CONF_POLLING, DOMAIN, DOMAIN_DATA, LOGGER
 from .services import async_setup_services

 ATTR_DEVICE_NAME = "device_name"
@@ -65,16 +67,13 @@ class AbodeSystem:
    logout_listener: CALLBACK_TYPE | None = None


-type AbodeConfigEntry = ConfigEntry[AbodeSystem]
-
-
 async def async_setup(hass: HomeAssistant, config: ConfigType) -> bool:
    """Set up the Abode component."""
    async_setup_services(hass)
    return True


-async def async_setup_entry(hass: HomeAssistant, entry: AbodeConfigEntry) -> bool:
+async def async_setup_entry(hass: HomeAssistant, entry: ConfigEntry) -> bool:
    """Set up Abode integration from a config entry."""
    username = entry.data[CONF_USERNAME]
    password = entry.data[CONF_PASSWORD]
@@ -100,54 +99,50 @@ async def async_setup_entry(hass: HomeAssistant, entry: AbodeConfigEntry) -> boo
    except (AbodeException, ConnectTimeout, HTTPError) as ex:
        raise ConfigEntryNotReady(f"Unable to connect to Abode: {ex}") from ex

-    entry.runtime_data = AbodeSystem(abode, polling)
+    hass.data[DOMAIN_DATA] = AbodeSystem(abode, polling)

    await hass.config_entries.async_forward_entry_setups(entry, PLATFORMS)

-    await setup_hass_events(hass, entry)
-    await hass.async_add_executor_job(setup_abode_events, hass, entry)
+    await setup_hass_events(hass)
+    await hass.async_add_executor_job(setup_abode_events, hass)

    return True


-def _shutdown_client(abode: Abode) -> None:
-    """Shutdown client."""
-    abode.events.stop()
-    abode.logout()
-
-
-async def async_unload_entry(hass: HomeAssistant, entry: AbodeConfigEntry) -> bool:
+async def async_unload_entry(hass: HomeAssistant, entry: ConfigEntry) -> bool:
    """Unload a config entry."""
    unload_ok = await hass.config_entries.async_unload_platforms(entry, PLATFORMS)

-    await hass.async_add_executor_job(_shutdown_client, entry.runtime_data.abode)
+    await hass.async_add_executor_job(hass.data[DOMAIN_DATA].abode.events.stop)
+    await hass.async_add_executor_job(hass.data[DOMAIN_DATA].abode.logout)

-    if logout_listener := entry.runtime_data.logout_listener:
+    if logout_listener := hass.data[DOMAIN_DATA].logout_listener:
        logout_listener()
+    hass.data.pop(DOMAIN_DATA)

    return unload_ok


-async def setup_hass_events(hass: HomeAssistant, entry: AbodeConfigEntry) -> None:
+async def setup_hass_events(hass: HomeAssistant) -> None:
    """Home Assistant start and stop callbacks."""

    def logout(event: Event) -> None:
        """Logout of Abode."""
-        if not entry.runtime_data.polling:
-            entry.runtime_data.abode.events.stop()
+        if not hass.data[DOMAIN_DATA].polling:
+            hass.data[DOMAIN_DATA].abode.events.stop()

-        entry.runtime_data.abode.logout()
+        hass.data[DOMAIN_DATA].abode.logout()
        LOGGER.info("Logged out of Abode")

-    if not entry.runtime_data.polling:
-        await hass.async_add_executor_job(entry.runtime_data.abode.events.start)
+    if not hass.data[DOMAIN_DATA].polling:
+        await hass.async_add_executor_job(hass.data[DOMAIN_DATA].abode.events.start)

-    entry.runtime_data.logout_listener = hass.bus.async_listen_once(
+    hass.data[DOMAIN_DATA].logout_listener = hass.bus.async_listen_once(
        EVENT_HOMEASSISTANT_STOP, logout
    )


-def setup_abode_events(hass: HomeAssistant, entry: AbodeConfigEntry) -> None:
+def setup_abode_events(hass: HomeAssistant) -> None:
    """Event callbacks."""

    def event_callback(event: str, event_json: dict[str, str]) -> None:
@@ -184,6 +179,6 @@ def setup_abode_events(hass: HomeAssistant, entry: AbodeConfigEntry) -> None:
    ]

    for event in events:
-        entry.runtime_data.abode.events.add_event_callback(
+        hass.data[DOMAIN_DATA].abode.events.add_event_callback(
            event, partial(event_callback, event)
        )
@@ -1,5 +1,7 @@
 """Support for Abode Security System alarm control panels."""

+from __future__ import annotations
+
 from jaraco.abode.devices.alarm import Alarm

 from homeassistant.components.alarm_control_panel import (
@@ -7,20 +9,21 @@ from homeassistant.components.alarm_control_panel import (
    AlarmControlPanelEntityFeature,
    AlarmControlPanelState,
 )
+from homeassistant.config_entries import ConfigEntry
 from homeassistant.core import HomeAssistant
 from homeassistant.helpers.entity_platform import AddConfigEntryEntitiesCallback

-from . import AbodeConfigEntry
+from .const import DOMAIN_DATA
 from .entity import AbodeDevice


 async def async_setup_entry(
    hass: HomeAssistant,
-    entry: AbodeConfigEntry,
+    entry: ConfigEntry,
    async_add_entities: AddConfigEntryEntitiesCallback,
 ) -> None:
    """Set up Abode alarm control panel device."""
-    data = entry.runtime_data
+    data = hass.data[DOMAIN_DATA]
    async_add_entities(
        [AbodeAlarm(data, await hass.async_add_executor_job(data.abode.get_alarm))]
    )
@@ -1,5 +1,7 @@
 """Support for Abode Security System binary sensors."""

+from __future__ import annotations
+
 from typing import cast

 from jaraco.abode.devices.binary_sensor import BinarySensor
@@ -8,21 +10,22 @@ from homeassistant.components.binary_sensor import (
    BinarySensorDeviceClass,
    BinarySensorEntity,
 )
+from homeassistant.config_entries import ConfigEntry
 from homeassistant.core import HomeAssistant
 from homeassistant.helpers.entity_platform import AddConfigEntryEntitiesCallback
 from homeassistant.util.enum import try_parse_enum

-from . import AbodeConfigEntry
+from .const import DOMAIN_DATA
 from .entity import AbodeDevice


 async def async_setup_entry(
    hass: HomeAssistant,
-    entry: AbodeConfigEntry,
+    entry: ConfigEntry,
    async_add_entities: AddConfigEntryEntitiesCallback,
 ) -> None:
    """Set up Abode binary sensor devices."""
-    data = entry.runtime_data
+    data = hass.data[DOMAIN_DATA]

    device_types = [
        "connectivity",
@@ -1,5 +1,7 @@
 """Support for Abode Security System cameras."""

+from __future__ import annotations
+
 from datetime import timedelta
 from typing import Any, cast

@@ -10,13 +12,14 @@ import requests
 from requests.models import Response

 from homeassistant.components.camera import Camera
+from homeassistant.config_entries import ConfigEntry
 from homeassistant.core import Event, HomeAssistant
 from homeassistant.helpers.dispatcher import async_dispatcher_connect
 from homeassistant.helpers.entity_platform import AddConfigEntryEntitiesCallback
 from homeassistant.util import Throttle

-from . import AbodeConfigEntry, AbodeSystem
-from .const import LOGGER
+from . import AbodeSystem
+from .const import DOMAIN_DATA, LOGGER
 from .entity import AbodeDevice

 MIN_TIME_BETWEEN_UPDATES = timedelta(seconds=90)
@@ -24,11 +27,11 @@ MIN_TIME_BETWEEN_UPDATES = timedelta(seconds=90)

 async def async_setup_entry(
    hass: HomeAssistant,
-    entry: AbodeConfigEntry,
+    entry: ConfigEntry,
    async_add_entities: AddConfigEntryEntitiesCallback,
 ) -> None:
    """Set up Abode camera devices."""
-    data = entry.runtime_data
+    data = hass.data[DOMAIN_DATA]

    async_add_entities(
        AbodeCamera(data, device, timeline.CAPTURE_IMAGE)
@@ -1,5 +1,7 @@
 """Config flow for the Abode Security System component."""

+from __future__ import annotations
+
 from collections.abc import Mapping
 from http import HTTPStatus
 from typing import Any, cast
@@ -1,10 +1,19 @@
 """Constants for the Abode Security System component."""

+from __future__ import annotations
+
 import logging
+from typing import TYPE_CHECKING
+
+from homeassistant.util.hass_dict import HassKey
+
+if TYPE_CHECKING:
+    from . import AbodeSystem

 LOGGER = logging.getLogger(__package__)

 DOMAIN = "abode"
+DOMAIN_DATA: HassKey[AbodeSystem] = HassKey(DOMAIN)
 ATTRIBUTION = "Data provided by goabode.com"

 CONF_POLLING = "polling"
@@ -5,20 +5,21 @@ from typing import Any
 from jaraco.abode.devices.cover import Cover

 from homeassistant.components.cover import CoverEntity
+from homeassistant.config_entries import ConfigEntry
 from homeassistant.core import HomeAssistant
 from homeassistant.helpers.entity_platform import AddConfigEntryEntitiesCallback

-from . import AbodeConfigEntry
+from .const import DOMAIN_DATA
 from .entity import AbodeDevice


 async def async_setup_entry(
    hass: HomeAssistant,
-    entry: AbodeConfigEntry,
+    entry: ConfigEntry,
    async_add_entities: AddConfigEntryEntitiesCallback,
 ) -> None:
    """Set up Abode cover devices."""
-    data = entry.runtime_data
+    data = hass.data[DOMAIN_DATA]

    async_add_entities(
        AbodeCover(data, device)
@@ -7,7 +7,7 @@ from homeassistant.helpers.device_registry import DeviceInfo
 from homeassistant.helpers.entity import Entity

 from . import AbodeSystem
-from .const import ATTRIBUTION, DOMAIN
+from .const import ATTRIBUTION, DOMAIN, DOMAIN_DATA


 class AbodeEntity(Entity):
@@ -29,7 +29,7 @@ class AbodeEntity(Entity):
            self._update_connection_status,
        )

-        self._data.entity_ids.add(self.entity_id)
+        self.hass.data[DOMAIN_DATA].entity_ids.add(self.entity_id)

    async def async_will_remove_from_hass(self) -> None:
        """Unsubscribe from Abode connection status updates."""
@@ -1,5 +1,7 @@
 """Support for Abode Security System lights."""

+from __future__ import annotations
+
 from math import ceil
 from typing import Any

@@ -14,20 +16,21 @@ from homeassistant.components.light import (
    ColorMode,
    LightEntity,
 )
+from homeassistant.config_entries import ConfigEntry
 from homeassistant.core import HomeAssistant
 from homeassistant.helpers.entity_platform import AddConfigEntryEntitiesCallback

-from . import AbodeConfigEntry
+from .const import DOMAIN_DATA
 from .entity import AbodeDevice


 async def async_setup_entry(
    hass: HomeAssistant,
-    entry: AbodeConfigEntry,
+    entry: ConfigEntry,
    async_add_entities: AddConfigEntryEntitiesCallback,
 ) -> None:
    """Set up Abode light devices."""
-    data = entry.runtime_data
+    data = hass.data[DOMAIN_DATA]

    async_add_entities(
        AbodeLight(data, device)
@@ -5,20 +5,21 @@ from typing import Any
 from jaraco.abode.devices.lock import Lock

 from homeassistant.components.lock import LockEntity
+from homeassistant.config_entries import ConfigEntry
 from homeassistant.core import HomeAssistant
 from homeassistant.helpers.entity_platform import AddConfigEntryEntitiesCallback

-from . import AbodeConfigEntry
+from .const import DOMAIN_DATA
 from .entity import AbodeDevice


 async def async_setup_entry(
    hass: HomeAssistant,
-    entry: AbodeConfigEntry,
+    entry: ConfigEntry,
    async_add_entities: AddConfigEntryEntitiesCallback,
 ) -> None:
    """Set up Abode lock devices."""
-    data = entry.runtime_data
+    data = hass.data[DOMAIN_DATA]

    async_add_entities(
        AbodeLock(data, device)
@@ -1,5 +1,7 @@
 """Support for Abode Security System sensors."""

+from __future__ import annotations
+
 from collections.abc import Callable
 from dataclasses import dataclass
 from typing import cast
@@ -12,11 +14,13 @@ from homeassistant.components.sensor import (
    SensorEntityDescription,
    SensorStateClass,
 )
+from homeassistant.config_entries import ConfigEntry
 from homeassistant.const import LIGHT_LUX, PERCENTAGE, UnitOfTemperature
 from homeassistant.core import HomeAssistant
 from homeassistant.helpers.entity_platform import AddConfigEntryEntitiesCallback

-from . import AbodeConfigEntry, AbodeSystem
+from . import AbodeSystem
+from .const import DOMAIN_DATA
 from .entity import AbodeDevice

 ABODE_TEMPERATURE_UNIT_HA_UNIT = {
@@ -62,11 +66,11 @@ SENSOR_TYPES: tuple[AbodeSensorDescription, ...] = (

 async def async_setup_entry(
    hass: HomeAssistant,
-    entry: AbodeConfigEntry,
+    entry: ConfigEntry,
    async_add_entities: AddConfigEntryEntitiesCallback,
 ) -> None:
    """Set up Abode sensor devices."""
-    data = entry.runtime_data
+    data = hass.data[DOMAIN_DATA]

    async_add_entities(
        AbodeSensor(data, device, description)
@@ -1,20 +1,16 @@
 """Support for the Abode Security System."""

-from typing import TYPE_CHECKING
+from __future__ import annotations

 from jaraco.abode.exceptions import Exception as AbodeException
 import voluptuous as vol

 from homeassistant.const import ATTR_ENTITY_ID
 from homeassistant.core import HomeAssistant, ServiceCall, callback
-from homeassistant.exceptions import ServiceValidationError
 from homeassistant.helpers import config_validation as cv
 from homeassistant.helpers.dispatcher import dispatcher_send

-from .const import DOMAIN, LOGGER
-
-if TYPE_CHECKING:
-    from . import AbodeConfigEntry, AbodeSystem
+from .const import DOMAIN, DOMAIN_DATA, LOGGER

 ATTR_SETTING = "setting"
 ATTR_VALUE = "value"
@@ -29,22 +25,13 @@ CAPTURE_IMAGE_SCHEMA = vol.Schema({ATTR_ENTITY_ID: cv.entity_ids})
 AUTOMATION_SCHEMA = vol.Schema({ATTR_ENTITY_ID: cv.entity_ids})


-def _get_abode_system(hass: HomeAssistant) -> AbodeSystem:
-    """Return the Abode system for the loaded config entry."""
-    entries: list[AbodeConfigEntry] = hass.config_entries.async_loaded_entries(DOMAIN)
-    if not entries:
-        raise ServiceValidationError("Abode integration is not loaded")
-    return entries[0].runtime_data
-
-
 def _change_setting(call: ServiceCall) -> None:
    """Change an Abode system setting."""
    setting = call.data[ATTR_SETTING]
    value = call.data[ATTR_VALUE]

    try:
-        _get_abode_system(call.hass).abode.set_setting(setting, value)
-    # pylint: disable-next=home-assistant-action-swallowed-exception
+        call.hass.data[DOMAIN_DATA].abode.set_setting(setting, value)
    except AbodeException as ex:
        LOGGER.warning(ex)

@@ -55,7 +42,7 @@ def _capture_image(call: ServiceCall) -> None:

    target_entities = [
        entity_id
-        for entity_id in _get_abode_system(call.hass).entity_ids
+        for entity_id in call.hass.data[DOMAIN_DATA].entity_ids
        if entity_id in entity_ids
    ]

@@ -70,7 +57,7 @@ def _trigger_automation(call: ServiceCall) -> None:

    target_entities = [
        entity_id
-        for entity_id in _get_abode_system(call.hass).entity_ids
+        for entity_id in call.hass.data[DOMAIN_DATA].entity_ids
        if entity_id in entity_ids
    ]

@@ -1,15 +1,18 @@
 """Support for Abode Security System switches."""

+from __future__ import annotations
+
 from typing import Any, cast

 from jaraco.abode.devices.switch import Switch

 from homeassistant.components.switch import SwitchEntity
+from homeassistant.config_entries import ConfigEntry
 from homeassistant.core import HomeAssistant
 from homeassistant.helpers.dispatcher import async_dispatcher_connect
 from homeassistant.helpers.entity_platform import AddConfigEntryEntitiesCallback

-from . import AbodeConfigEntry
+from .const import DOMAIN_DATA
 from .entity import AbodeAutomation, AbodeDevice

 DEVICE_TYPES = ["switch", "valve"]
@@ -17,11 +20,11 @@ DEVICE_TYPES = ["switch", "valve"]

 async def async_setup_entry(
    hass: HomeAssistant,
-    entry: AbodeConfigEntry,
+    entry: ConfigEntry,
    async_add_entities: AddConfigEntryEntitiesCallback,
 ) -> None:
    """Set up Abode switch devices."""
-    data = entry.runtime_data
+    data = hass.data[DOMAIN_DATA]

    entities: list[SwitchEntity] = [
        AbodeSwitch(data, device)
@@ -1,5 +1,7 @@
 """Coordinator for Acaia integration."""

+from __future__ import annotations
+
 from datetime import timedelta
 import logging

@@ -1,5 +1,7 @@
 """Diagnostics support for Acaia."""

+from __future__ import annotations
+
 from dataclasses import asdict
 from typing import Any

@@ -143,4 +143,4 @@ class AcaiaRestoreSensor(AcaiaEntity, RestoreSensor):
    @property
    def available(self) -> bool:
        """Return True if entity is available."""
-        return super().available or self.native_value is not None
+        return super().available or self._restored_data is not None
@@ -1,5 +1,7 @@
 """The AccuWeather component."""

+from __future__ import annotations
+
 import asyncio
 import logging

@@ -1,8 +1,10 @@
 """Adds config flow for AccuWeather."""

+from __future__ import annotations
+
 from asyncio import timeout
 from collections.abc import Mapping
-from typing import TYPE_CHECKING, Any
+from typing import Any

 from accuweather import AccuWeather, ApiError, InvalidApiKeyError, RequestsExceededError
 from aiohttp import ClientError
@@ -10,7 +12,7 @@ from aiohttp.client_exceptions import ClientConnectorError
 import voluptuous as vol

 from homeassistant.config_entries import ConfigFlow, ConfigFlowResult
-from homeassistant.const import CONF_API_KEY, CONF_LATITUDE, CONF_LONGITUDE
+from homeassistant.const import CONF_API_KEY, CONF_LATITUDE, CONF_LONGITUDE, CONF_NAME
 from homeassistant.helpers import config_validation as cv
 from homeassistant.helpers.aiohttp_client import async_get_clientsession

@@ -53,11 +55,8 @@ class AccuWeatherFlowHandler(ConfigFlow, domain=DOMAIN):
                )
                self._abort_if_unique_id_configured()

-                if TYPE_CHECKING:
-                    assert accuweather.location_name is not None
-
                return self.async_create_entry(
-                    title=accuweather.location_name, data=user_input
+                    title=user_input[CONF_NAME], data=user_input
                )

        return self.async_show_form(
@@ -71,6 +70,9 @@ class AccuWeatherFlowHandler(ConfigFlow, domain=DOMAIN):
                    vol.Optional(
                        CONF_LONGITUDE, default=self.hass.config.longitude
                    ): cv.longitude,
+                    vol.Optional(
+                        CONF_NAME, default=self.hass.config.location_name
+                    ): str,
                }
            ),
            errors=errors,
@@ -1,5 +1,7 @@
 """Constants for AccuWeather integration."""

+from __future__ import annotations
+
 from datetime import timedelta
 from typing import Final

@@ -1,5 +1,7 @@
 """The AccuWeather coordinator."""

+from __future__ import annotations
+
 from asyncio import timeout
 from collections.abc import Awaitable, Callable
 from dataclasses import dataclass
@@ -62,7 +64,7 @@ class AccuWeatherObservationDataUpdateCoordinator(
        """Initialize."""
        self.accuweather = accuweather
        self.location_key = accuweather.location_key
-        name = config_entry.data.get(CONF_NAME) or config_entry.title
+        name = config_entry.data[CONF_NAME]

        if TYPE_CHECKING:
            assert self.location_key is not None
@@ -120,7 +122,7 @@ class AccuWeatherForecastDataUpdateCoordinator(
        self.accuweather = accuweather
        self.location_key = accuweather.location_key
        self._fetch_method = fetch_method
-        name = config_entry.data.get(CONF_NAME) or config_entry.title
+        name = config_entry.data[CONF_NAME]

        if TYPE_CHECKING:
            assert self.location_key is not None
@@ -1,5 +1,7 @@
 """Diagnostics support for AccuWeather."""

+from __future__ import annotations
+
 from typing import Any

 from homeassistant.components.diagnostics import async_redact_data
@@ -1,5 +1,7 @@
 """Support for the AccuWeather service."""

+from __future__ import annotations
+
 from collections.abc import Callable
 from dataclasses import dataclass
 from typing import Any, cast
@@ -25,7 +25,8 @@
        "data": {
          "api_key": "[%key:common::config_flow::data::api_key%]",
          "latitude": "[%key:common::config_flow::data::latitude%]",
-          "longitude": "[%key:common::config_flow::data::longitude%]"
+          "longitude": "[%key:common::config_flow::data::longitude%]",
+          "name": "[%key:common::config_flow::data::name%]"
        },
        "data_description": {
          "api_key": "API key generated in the AccuWeather APIs portal."
@@ -1,5 +1,7 @@
 """Provide info to system health."""

+from __future__ import annotations
+
 from typing import Any

 from accuweather.const import ENDPOINT
@@ -1,5 +1,7 @@
 """Support for the AccuWeather service."""

+from __future__ import annotations
+
 from typing import cast

 from homeassistant.components.weather import (
@@ -1,5 +1,7 @@
 """Use serial protocol of Acer projector to obtain state of the projector."""

+from __future__ import annotations
+
 from typing import Final

 from homeassistant.const import STATE_OFF, STATE_ON
@@ -5,5 +5,5 @@
  "documentation": "https://www.home-assistant.io/integrations/acer_projector",
  "iot_class": "local_polling",
  "quality_scale": "legacy",
-  "requirements": ["serialx==1.8.0"]
+  "requirements": ["serialx==1.4.1"]
 }
@@ -1,5 +1,7 @@
 """Use serial protocol of Acer projector to obtain state of the projector."""

+from __future__ import annotations
+
 import logging
 import re
 from typing import Any
@@ -1,5 +1,7 @@
 """Config flow for Rollease Acmeda Automate Pulse Hub."""

+from __future__ import annotations
+
 from asyncio import timeout
 from contextlib import suppress
 from typing import Any
@@ -1,5 +1,7 @@
 """Support for Acmeda Roller Blinds."""

+from __future__ import annotations
+
 from typing import Any

 from homeassistant.components.cover import (
@@ -1,5 +1,7 @@
 """Base class for Acmeda Roller Blinds."""

+from __future__ import annotations
+
 import aiopulse

 from homeassistant.core import callback
@@ -1,5 +1,7 @@
 """Helper functions for Acmeda Pulse."""

+from __future__ import annotations
+
 from typing import TYPE_CHECKING

 from aiopulse import Roller
@@ -1,5 +1,7 @@
 """Code to handle a Pulse Hub."""

+from __future__ import annotations
+
 import asyncio
 from collections.abc import Callable

@@ -1,5 +1,7 @@
 """Support for Acmeda Roller Blind Batteries."""

+from __future__ import annotations
+
 from homeassistant.components.sensor import SensorDeviceClass, SensorEntity
 from homeassistant.const import PERCENTAGE
 from homeassistant.core import HomeAssistant, callback
@@ -1,5 +1,7 @@
 """Support for Actiontec MI424WR (Verizon FIOS) routers."""

+from __future__ import annotations
+
 import re
 from typing import Final

@@ -1,5 +1,7 @@
 """Support for Actiontec MI424WR (Verizon FIOS) routers."""

+from __future__ import annotations
+
 import logging
 from typing import Final

@@ -38,7 +38,6 @@ HVAC_MODE_MAPPING_ACTRONAIR_TO_HA = {
    "HEAT": HVACMode.HEAT,
    "FAN": HVACMode.FAN_ONLY,
    "AUTO": HVACMode.AUTO,
-    "DRY": HVACMode.DRY,
    "OFF": HVACMode.OFF,
 }
 HVAC_MODE_MAPPING_HA_TO_ACTRONAIR = {
@@ -80,6 +79,7 @@ class ActronAirClimateEntity(ClimateEntity):
    )
    _attr_name = None
    _attr_fan_modes = list(FAN_MODE_MAPPING_ACTRONAIR_TO_HA.values())
+    _attr_hvac_modes = list(HVAC_MODE_MAPPING_ACTRONAIR_TO_HA.values())


 class ActronSystemClimate(ActronAirAcEntity, ActronAirClimateEntity):
@@ -93,17 +93,6 @@ class ActronSystemClimate(ActronAirAcEntity, ActronAirClimateEntity):
        super().__init__(coordinator)
        self._attr_unique_id = self._serial_number

-    @property
-    def hvac_modes(self) -> list[HVACMode]:
-        """Return the list of supported HVAC modes."""
-        modes = [
-            HVAC_MODE_MAPPING_ACTRONAIR_TO_HA[mode]
-            for mode in self._status.user_aircon_settings.supported_modes
-            if mode in HVAC_MODE_MAPPING_ACTRONAIR_TO_HA
-        ]
-        modes.append(HVACMode.OFF)
-        return modes
-
    @property
    def min_temp(self) -> float:
        """Return the minimum temperature that can be set."""
@@ -147,7 +136,7 @@ class ActronSystemClimate(ActronAirAcEntity, ActronAirClimateEntity):
    @property
    def target_temperature(self) -> float:
        """Return the target temperature."""
-        return self._status.user_aircon_settings.current_setpoint
+        return self._status.user_aircon_settings.temperature_setpoint_cool_c

    @actron_air_command
    async def async_set_fan_mode(self, fan_mode: str) -> None:
@@ -190,18 +179,6 @@ class ActronZoneClimate(ActronAirZoneEntity, ActronAirClimateEntity):
        super().__init__(coordinator, zone)
        self._attr_unique_id: str = self._zone_identifier

-    @property
-    def hvac_modes(self) -> list[HVACMode]:
-        """Return the list of supported HVAC modes."""
-        status = self.coordinator.data
-        modes = [
-            HVAC_MODE_MAPPING_ACTRONAIR_TO_HA[mode]
-            for mode in status.user_aircon_settings.supported_modes
-            if mode in HVAC_MODE_MAPPING_ACTRONAIR_TO_HA
-        ]
-        modes.append(HVACMode.OFF)
-        return modes
-
    @property
    def min_temp(self) -> float:
        """Return the minimum temperature that can be set."""
@@ -239,7 +216,7 @@ class ActronZoneClimate(ActronAirZoneEntity, ActronAirClimateEntity):
    @property
    def target_temperature(self) -> float | None:
        """Return the target temperature."""
-        return self._zone.current_setpoint
+        return self._zone.temperature_setpoint_cool_c

    @actron_air_command
    async def async_set_hvac_mode(self, hvac_mode: HVACMode) -> None:
@@ -6,12 +6,7 @@ from typing import Any

 from actron_neo_api import ActronAirAPI, ActronAirAuthError

-from homeassistant.config_entries import (
-    SOURCE_REAUTH,
-    SOURCE_RECONFIGURE,
-    ConfigFlow,
-    ConfigFlowResult,
-)
+from homeassistant.config_entries import SOURCE_REAUTH, ConfigFlow, ConfigFlowResult
 from homeassistant.const import CONF_API_TOKEN
 from homeassistant.exceptions import HomeAssistantError

@@ -110,14 +105,6 @@ class ActronAirConfigFlow(ConfigFlow, domain=DOMAIN):
                data_updates={CONF_API_TOKEN: self._api.refresh_token_value},
            )

-        # Check if this is a reconfigure flow
-        if self.source == SOURCE_RECONFIGURE:
-            self._abort_if_unique_id_mismatch(reason="wrong_account")
-            return self.async_update_reload_and_abort(
-                self._get_reconfigure_entry(),
-                data_updates={CONF_API_TOKEN: self._api.refresh_token_value},
-            )
-
        self._abort_if_unique_id_configured()
        return self.async_create_entry(
            title=user_data.email,
@@ -151,20 +138,6 @@ class ActronAirConfigFlow(ConfigFlow, domain=DOMAIN):

        return self.async_show_form(step_id="reauth_confirm")

-    async def async_step_reconfigure(
-        self, user_input: dict[str, Any] | None = None
-    ) -> ConfigFlowResult:
-        """Handle reconfiguration request."""
-        return await self.async_step_reconfigure_confirm()
-
-    async def async_step_reconfigure_confirm(
-        self, user_input: dict[str, Any] | None = None
-    ) -> ConfigFlowResult:
-        """Confirm reconfiguration dialog."""
-        if user_input is not None:
-            return await self.async_step_user()
-        return self.async_show_form(step_id="reconfigure_confirm")
-
    async def async_step_connection_error(
        self, user_input: dict[str, Any] | None = None
    ) -> ConfigFlowResult:
@@ -1,5 +1,7 @@
 """Coordinator for Actron Air integration."""

+from __future__ import annotations
+
 from dataclasses import dataclass
 from datetime import timedelta

@@ -1,5 +1,7 @@
 """Diagnostics support for Actron Air."""

+from __future__ import annotations
+
 from typing import Any

 from homeassistant.components.diagnostics import async_redact_data
@@ -13,5 +13,5 @@
  "integration_type": "hub",
  "iot_class": "cloud_polling",
  "quality_scale": "silver",
-  "requirements": ["actron-neo-api==0.5.6"]
+  "requirements": ["actron-neo-api==0.5.3"]
 }
@@ -60,7 +60,7 @@ rules:
  entity-translations: done
  exception-translations: done
  icon-translations: done
-  reconfiguration-flow: done
+  reconfiguration-flow: todo
  repair-issues:
    status: exempt
    comment: This integration does not have any known issues that require repair.
@@ -4,8 +4,7 @@
      "already_configured": "[%key:common::config_flow::abort::already_configured_account%]",
      "oauth2_error": "Failed to start authentication flow",
      "reauth_successful": "[%key:common::config_flow::abort::reauth_successful%]",
-      "reconfigure_successful": "[%key:common::config_flow::abort::reconfigure_successful%]",
-      "wrong_account": "You must authenticate with the same Actron Air account that was originally configured."
+      "wrong_account": "You must reauthenticate with the same Actron Air account that was originally configured."
    },
    "error": {
      "oauth2_error": "Failed to start authentication flow. Please try again later."
@@ -23,10 +22,6 @@
        "description": "Your Actron Air authentication has expired. Select continue to reauthenticate with your Actron Air account. You will be prompted to log in again to restore the connection.",
        "title": "Authentication expired"
      },
-      "reconfigure_confirm": {
-        "description": "Reconfigure your Actron Air account. You will be prompted to log in again. Note: you must use the same account that was originally configured.",
-        "title": "Reconfigure Actron Air"
-      },
      "timeout": {
        "data": {},
        "description": "The authentication process timed out. Please try again.",
@@ -1,5 +1,7 @@
 """The Adax integration."""

+from __future__ import annotations
+
 from homeassistant.const import Platform
 from homeassistant.core import HomeAssistant

@@ -1,5 +1,7 @@
 """Support for Adax wifi-enabled home heaters."""

+from __future__ import annotations
+
 from typing import Any, cast

 from adax import Adax
@@ -1,5 +1,7 @@
 """Config flow for Adax integration."""

+from __future__ import annotations
+
 import logging
 from typing import Any

@@ -1,5 +1,7 @@
 """Support for Adax energy sensors."""

+from __future__ import annotations
+
 from dataclasses import dataclass
 from typing import cast

--- a/Show More
+++ b/Show More
@@ -1 +1 @@
 .14.5
 .14.2