Homevolt select

Signed-off-by: Daniel Hjelseth Høyer <github@dahoiv.net>

.claude/skills/github-pr-reviewer/SKILL.md

@@ -1,46 +0,0 @@
----
-name: github-pr-reviewer
-description: Review a GitHub pull request and provide feedback comments. Use when the user says "review the current PR" or asks to review a specific PR.
----
-
-# Review GitHub Pull Request
-
-## Preparation:
-- Check if the local commit matches the last one in the PR. If not, checkout the PR locally using 'gh pr checkout'. 
-- CRITICAL: If 'gh pr checkout' fails for ANY reason, you MUST immediately STOP.
-    - Do NOT attempt any workarounds. 
-    - Do NOT proceed with the review.
-    - ALERT about the failure and WAIT for instructions.
-    - This is a hard requirement - no exceptions.
-
-## Follow these steps:
-1. Use 'gh pr view' to get the PR details and description.
-2. Use 'gh pr diff' to see all the changes in the PR.
-3. Analyze the code changes for:
-   - Code quality and style consistency
-   - Potential bugs or issues
-   - Performance implications
-   - Security concerns
-   - Test coverage
-   - Documentation updates if needed
-4. Ensure any existing review comments have been addressed.
-5. Generate constructive review comments in the CONSOLE. DO NOT POST TO GITHUB YOURSELF.
-
-## IMPORTANT:
-- Just review. DO NOT make any changes
-- Be constructive and specific in your comments
-- Suggest improvements where appropriate
-- Only provide review feedback in the CONSOLE. DO NOT ACT ON GITHUB.
-- No need to run tests or linters, just review the code changes.
-- No need to highlight things that are already good.
-
-## Output format:
-- List specific comments for each file/line that needs attention
-- In the end, summarize with an overall assessment (approve, request changes, or comment) and bullet point list of changes suggested, if any.
-  - Example output:
-    ```
-    Overall assessment: request changes.
-    - [CRITICAL] Memory leak in homeassistant/components/sensor/my_sensor.py:143
-    - [PROBLEM] Inefficient algorithm in homeassistant/helpers/data_processing.py:87
-    - [SUGGESTION] Improve variable naming in homeassistant/helpers/config_validation.py:45
-    ```

.claude/skills/integrations/SKILL.md

@@ -620,14 +620,12 @@ rules:
 
 ### Config Flow Testing
 - **100% Coverage Required**: All config flow paths must be tested
-- **Patch Boundaries**: Only patch library or client methods when testing config flows. Do not patch methods defined in `config_flow.py`; exercise the flow logic end-to-end.
 - **Test Scenarios**:
   - All flow initiation methods (user, discovery, import)
   - Successful configuration paths
   - Error recovery scenarios
   - Prevention of duplicate entries
   - Flow completion after errors
-  - Reauthentication/reconfigure flows
 
 ### Testing
 - **Integration-specific tests** (recommended):

.core_files.yaml

@@ -34,7 +34,6 @@ base_platforms: &base_platforms
   - homeassistant/components/humidifier/**
   - homeassistant/components/image/**
   - homeassistant/components/image_processing/**
-  - homeassistant/components/infrared/**
   - homeassistant/components/lawn_mower/**
   - homeassistant/components/light/**
   - homeassistant/components/lock/**

.gitattributes

@@ -16,7 +16,6 @@ Dockerfile.dev linguist-language=Dockerfile
 CODEOWNERS linguist-generated=true
 Dockerfile linguist-generated=true
 homeassistant/generated/*.py linguist-generated=true
-machine/* linguist-generated=true
 mypy.ini linguist-generated=true
 requirements.txt linguist-generated=true
 requirements_all.txt linguist-generated=true

.github/workflows/builder.yml

@@ -10,6 +10,7 @@ on:
 
 env:
   BUILD_TYPE: core
+  DEFAULT_PYTHON: "3.14.2"
   PIP_TIMEOUT: 60
   UV_HTTP_TIMEOUT: 60
   UV_SYSTEM_PYTHON: "true"
@@ -35,17 +36,16 @@ jobs:
       channel: ${{ steps.version.outputs.channel }}
       publish: ${{ steps.version.outputs.publish }}
       architectures: ${{ env.ARCHITECTURES }}
-      base_image_version: ${{ env.BASE_IMAGE_VERSION }}
     steps:
       - name: Checkout the repository
         uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
         with:
           persist-credentials: false
 
-      - name: Set up Python
+      - name: Set up Python ${{ env.DEFAULT_PYTHON }}
         uses: actions/setup-python@a309ff8b426b58ec0e2a45f0f869d46889d02405 # v6.2.0
         with:
-          python-version-file: ".python-version"
+          python-version: ${{ env.DEFAULT_PYTHON }}
 
       - name: Get information
         id: info
@@ -73,14 +73,14 @@ jobs:
       - name: Download Translations
         run: python3 -m script.translations download
         env:
-          LOKALISE_TOKEN: ${{ secrets.LOKALISE_TOKEN }} # zizmor: ignore[secrets-outside-env]
+          LOKALISE_TOKEN: ${{ secrets.LOKALISE_TOKEN }}
 
       - name: Archive translations
         shell: bash
         run: find ./homeassistant/components/*/translations -name "*.json" | tar zcvf translations.tar.gz -T -
 
       - name: Upload translations
-        uses: actions/upload-artifact@bbbca2ddaa5d8feaa63e36b76fdaad77386f024f # v7.0.0
+        uses: actions/upload-artifact@b7c566a772e6b6bfb58ed0dc250532a479d7789f # v6.0.0
         with:
           name: translations
           path: translations.tar.gz
@@ -101,7 +101,7 @@ jobs:
         arch: ${{ fromJson(needs.init.outputs.architectures) }}
         include:
           - arch: amd64
-            os: ubuntu-24.04
+            os: ubuntu-latest
           - arch: aarch64
             os: ubuntu-24.04-arm
     steps:
@@ -112,7 +112,7 @@ jobs:
 
       - name: Download nightly wheels of frontend
         if: needs.init.outputs.channel == 'dev'
-        uses: dawidd6/action-download-artifact@2536c51d3d126276eb39f74d6bc9c72ac6ef30d3 # v16
+        uses: dawidd6/action-download-artifact@5c98f0b039f36ef966fdb7dfa9779262785ecb05 # v14
         with:
           github_token: ${{secrets.GITHUB_TOKEN}}
           repo: home-assistant/frontend
@@ -123,7 +123,7 @@ jobs:
 
       - name: Download nightly wheels of intents
         if: needs.init.outputs.channel == 'dev'
-        uses: dawidd6/action-download-artifact@2536c51d3d126276eb39f74d6bc9c72ac6ef30d3 # v16
+        uses: dawidd6/action-download-artifact@5c98f0b039f36ef966fdb7dfa9779262785ecb05 # v14
         with:
           github_token: ${{secrets.GITHUB_TOKEN}}
           repo: OHF-Voice/intents-package
@@ -132,11 +132,11 @@ jobs:
           workflow_conclusion: success
           name: package
 
-      - name: Set up Python
+      - name: Set up Python ${{ env.DEFAULT_PYTHON }}
         if: needs.init.outputs.channel == 'dev'
         uses: actions/setup-python@a309ff8b426b58ec0e2a45f0f869d46889d02405 # v6.2.0
         with:
-          python-version-file: ".python-version"
+          python-version: ${{ env.DEFAULT_PYTHON }}
 
       - name: Adjust nightly version
         if: needs.init.outputs.channel == 'dev'
@@ -182,7 +182,7 @@ jobs:
           fi
 
       - name: Download translations
-        uses: actions/download-artifact@3e5f45b2cfb9172054b4087a40e8e0b5a5461e7c # v8.0.1
+        uses: actions/download-artifact@37930b1c2abaa49bbe596cd826c3c89aef350131 # v7.0.0
         with:
           name: translations
 
@@ -196,26 +196,83 @@ jobs:
         run: |
           echo "${GITHUB_SHA};${GITHUB_REF};${GITHUB_EVENT_NAME};${GITHUB_ACTOR}" > rootfs/OFFICIAL_IMAGE
 
-      - name: Build base image
-        uses: home-assistant/builder/actions/build-image@62a1597b84b3461abad9816d9cd92862a2b542c3 # 2026.03.2
+      - name: Login to GitHub Container Registry
+        uses: docker/login-action@c94ce9fb468520275223c153574b00df6fe4bcc9 # v3.7.0
         with:
-          arch: ${{ matrix.arch }}
-          build-args: |
-            BUILD_FROM=ghcr.io/home-assistant/${{ matrix.arch }}-homeassistant-base:${{ needs.init.outputs.base_image_version }}
-          cache-gha: false
-          container-registry-password: ${{ secrets.GITHUB_TOKEN }}
-          cosign-base-identity: "https://github.com/home-assistant/docker/.*"
-          cosign-base-verify: ghcr.io/home-assistant/${{ matrix.arch }}-homeassistant-base:${{ needs.init.outputs.base_image_version }}
-          image: ghcr.io/home-assistant/${{ matrix.arch }}-homeassistant
-          image-tags: ${{ needs.init.outputs.version }}
+          registry: ghcr.io
+          username: ${{ github.repository_owner }}
+          password: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Install Cosign
+        uses: sigstore/cosign-installer@faadad0cce49287aee09b3a48701e75088a2c6ad # v4.0.0
+        with:
+          cosign-release: "v2.5.3"
+
+      - name: Set up Docker Buildx
+        uses: docker/setup-buildx-action@8d2750c68a42422c14e847fe6c8ac0403b4cbd6f # v3.12.0
+
+      - name: Build variables
+        id: vars
+        shell: bash
+        env:
+          ARCH: ${{ matrix.arch }}
+        run: |
+          echo "base_image=ghcr.io/home-assistant/${ARCH}-homeassistant-base:${BASE_IMAGE_VERSION}" >> "$GITHUB_OUTPUT"
+          echo "cache_image=ghcr.io/home-assistant/${ARCH}-homeassistant:latest" >> "$GITHUB_OUTPUT"
+          echo "created=$(date --rfc-3339=seconds --utc)" >> "$GITHUB_OUTPUT"
+
+      - name: Verify base image signature
+        env:
+          BASE_IMAGE: ${{ steps.vars.outputs.base_image }}
+        run: |
+          cosign verify \
+            --certificate-oidc-issuer https://token.actions.githubusercontent.com \
+            --certificate-identity-regexp "https://github.com/home-assistant/docker/.*" \
+            "${BASE_IMAGE}"
+
+      - name: Verify cache image signature
+        id: cache
+        continue-on-error: true
+        env:
+          CACHE_IMAGE: ${{ steps.vars.outputs.cache_image }}
+        run: |
+          cosign verify \
+            --certificate-oidc-issuer https://token.actions.githubusercontent.com \
+            --certificate-identity-regexp "https://github.com/home-assistant/core/.*" \
+            "${CACHE_IMAGE}"
+
+      - name: Build base image
+        id: build
+        uses: docker/build-push-action@10e90e3645eae34f1e60eeb005ba3a3d33f178e8 # v6.19.2
+        with:
+          context: .
+          file: ./Dockerfile
+          platforms: ${{ steps.vars.outputs.platform }}
           push: true
-          version: ${{ needs.init.outputs.version }}
+          cache-from: ${{ steps.cache.outcome == 'success' && steps.vars.outputs.cache_image || '' }}
+          build-args: |
+            BUILD_FROM=${{ steps.vars.outputs.base_image }}
+          tags: ghcr.io/home-assistant/${{ matrix.arch }}-homeassistant:${{ needs.init.outputs.version }}
+          outputs: type=image,push=true,compression=zstd,compression-level=9,force-compression=true,oci-mediatypes=true
+          labels: |
+            io.hass.arch=${{ matrix.arch }}
+            io.hass.version=${{ needs.init.outputs.version }}
+            org.opencontainers.image.created=${{ steps.vars.outputs.created }}
+            org.opencontainers.image.version=${{ needs.init.outputs.version }}
+
+      - name: Sign image
+        env:
+          ARCH: ${{ matrix.arch }}
+          VERSION: ${{ needs.init.outputs.version }}
+          DIGEST: ${{ steps.build.outputs.digest }}
+        run: |
+          cosign sign --yes "ghcr.io/home-assistant/${ARCH}-homeassistant:${VERSION}@${DIGEST}"
 
   build_machine:
     name: Build ${{ matrix.machine }} machine core image
     if: github.repository_owner == 'home-assistant'
     needs: ["init", "build_base"]
-    runs-on: ${{ matrix.runs-on }}
+    runs-on: ubuntu-latest
     permissions:
       contents: read # To check out the repository
       packages: write # To push to GHCR
@@ -224,6 +281,7 @@ jobs:
       matrix:
         machine:
           - generic-x86-64
+          - intel-nuc
           - khadas-vim3
           - odroid-c2
           - odroid-c4
@@ -236,55 +294,40 @@ jobs:
           - raspberrypi5-64
           - yellow
           - green
-        include:
-          # Default: aarch64 on native ARM runner
-          - arch: aarch64
-            runs-on: ubuntu-24.04-arm
-          # Overrides for amd64 machines
-          - machine: generic-x86-64
-            arch: amd64
-            runs-on: ubuntu-24.04
-          - machine: qemux86-64
-            arch: amd64
-            runs-on: ubuntu-24.04
     steps:
       - name: Checkout the repository
         uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
         with:
           persist-credentials: false
 
-      - name: Compute extra tags
-        id: tags
-        shell: bash
+      - name: Set build additional args
         env:
           VERSION: ${{ needs.init.outputs.version }}
         run: |
+          # Create general tags
           if [[ "${VERSION}" =~ d ]]; then
-            echo "extra_tags=dev" >> "$GITHUB_OUTPUT"
+            echo "BUILD_ARGS=--additional-tag dev" >> $GITHUB_ENV
           elif [[ "${VERSION}" =~ b ]]; then
-            echo "extra_tags=beta" >> "$GITHUB_OUTPUT"
+            echo "BUILD_ARGS=--additional-tag beta" >> $GITHUB_ENV
           else
-            echo "extra_tags=stable" >> "$GITHUB_OUTPUT"
+            echo "BUILD_ARGS=--additional-tag stable" >> $GITHUB_ENV
           fi
 
-      - name: Build machine image
-        uses: home-assistant/builder/actions/build-image@62a1597b84b3461abad9816d9cd92862a2b542c3 # 2026.03.2
+      - name: Login to GitHub Container Registry
+        uses: docker/login-action@c94ce9fb468520275223c153574b00df6fe4bcc9 # v3.7.0
         with:
-          arch: ${{ matrix.arch }}
-          build-args: |
-            BUILD_FROM=ghcr.io/home-assistant/${{ matrix.arch }}-homeassistant:${{ needs.init.outputs.version }}
-          cache-gha: false
-          container-registry-password: ${{ secrets.GITHUB_TOKEN }}
-          context: machine/
-          cosign-base-identity: "https://github.com/home-assistant/core/.*"
-          cosign-base-verify: ghcr.io/home-assistant/${{ matrix.arch }}-homeassistant:${{ needs.init.outputs.version }}
-          file: machine/${{ matrix.machine }}
-          image: ghcr.io/home-assistant/${{ matrix.machine }}-homeassistant
-          image-tags: |
-            ${{ needs.init.outputs.version }}
-            ${{ steps.tags.outputs.extra_tags }}
-          push: true
-          version: ${{ needs.init.outputs.version }}
+          registry: ghcr.io
+          username: ${{ github.repository_owner }}
+          password: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Build base image
+        uses: home-assistant/builder@2025.11.0 # zizmor: ignore[unpinned-uses]
+        with:
+          args: |
+            $BUILD_ARGS \
+            --target /data/machine \
+            --cosign \
+            --machine "${{ needs.init.outputs.version }}=${{ matrix.machine }}"
 
   publish_ha:
     name: Publish version files
@@ -342,19 +385,19 @@ jobs:
         registry: ["ghcr.io/home-assistant", "docker.io/homeassistant"]
     steps:
       - name: Install Cosign
-        uses: sigstore/cosign-installer@ba7bc0a3fef59531c69a25acd34668d6d3fe6f22 # v4.1.0
+        uses: sigstore/cosign-installer@faadad0cce49287aee09b3a48701e75088a2c6ad # v4.0.0
         with:
           cosign-release: "v2.5.3"
 
       - name: Login to DockerHub
         if: matrix.registry == 'docker.io/homeassistant'
-        uses: docker/login-action@b45d80f862d83dbcd57f89517bcf500b2ab88fb2 # v4.0.0
+        uses: docker/login-action@c94ce9fb468520275223c153574b00df6fe4bcc9 # v3.7.0
         with:
           username: ${{ secrets.DOCKERHUB_USERNAME }}
           password: ${{ secrets.DOCKERHUB_TOKEN }}
 
       - name: Login to GitHub Container Registry
-        uses: docker/login-action@b45d80f862d83dbcd57f89517bcf500b2ab88fb2 # v4.0.0
+        uses: docker/login-action@c94ce9fb468520275223c153574b00df6fe4bcc9 # v3.7.0
         with:
           registry: ghcr.io
           username: ${{ github.repository_owner }}
@@ -384,7 +427,7 @@ jobs:
       #   2025.12.0.dev202511250240 -> tags: 2025.12.0.dev202511250240, dev
       - name: Generate Docker metadata
         id: meta
-        uses: docker/metadata-action@030e881283bb7a6894de51c315a6bfe6a94e05cf # v6.0.0
+        uses: docker/metadata-action@c299e40c65443455700f0fdfc63efafe5b349051 # v5.10.0
         with:
           images: ${{ matrix.registry }}/home-assistant
           sep-tags: ","
@@ -398,7 +441,7 @@ jobs:
             type=semver,pattern={{major}}.{{minor}},value=${{ needs.init.outputs.version }},enable=${{ !contains(needs.init.outputs.version, 'd') && !contains(needs.init.outputs.version, 'b') }}
 
       - name: Set up Docker Buildx
-        uses: docker/setup-buildx-action@4d04d5d9486b7bd6fa91e7baf45bbb4f8b9deedd # v3.7.1
+        uses: docker/setup-buildx-action@8d2750c68a42422c14e847fe6c8ac0403b4cbd6f # v3.7.1
 
       - name: Copy architecture images to DockerHub
         if: matrix.registry == 'docker.io/homeassistant'
@@ -479,13 +522,13 @@ jobs:
         with:
           persist-credentials: false
 
-      - name: Set up Python
+      - name: Set up Python ${{ env.DEFAULT_PYTHON }}
         uses: actions/setup-python@a309ff8b426b58ec0e2a45f0f869d46889d02405 # v6.2.0
         with:
-          python-version-file: ".python-version"
+          python-version: ${{ env.DEFAULT_PYTHON }}
 
       - name: Download translations
-        uses: actions/download-artifact@3e5f45b2cfb9172054b4087a40e8e0b5a5461e7c # v8.0.1
+        uses: actions/download-artifact@37930b1c2abaa49bbe596cd826c3c89aef350131 # v7.0.0
         with:
           name: translations
 
@@ -527,14 +570,14 @@ jobs:
           persist-credentials: false
 
       - name: Login to GitHub Container Registry
-        uses: docker/login-action@b45d80f862d83dbcd57f89517bcf500b2ab88fb2 # v4.0.0
+        uses: docker/login-action@c94ce9fb468520275223c153574b00df6fe4bcc9 # v3.7.0
         with:
           registry: ghcr.io
           username: ${{ github.repository_owner }}
           password: ${{ secrets.GITHUB_TOKEN }}
 
       - name: Build Docker image
-        uses: docker/build-push-action@d08e5c354a6adb9ed34480a06d141179aa583294 # v7.0.0
+        uses: docker/build-push-action@10e90e3645eae34f1e60eeb005ba3a3d33f178e8 # v6.19.2
         with:
           context: . # So action will not pull the repository again
           file: ./script/hassfest/docker/Dockerfile
@@ -547,7 +590,7 @@ jobs:
       - name: Push Docker image
         if: needs.init.outputs.channel != 'dev' && needs.init.outputs.publish == 'true'
         id: push
-        uses: docker/build-push-action@d08e5c354a6adb9ed34480a06d141179aa583294 # v7.0.0
+        uses: docker/build-push-action@10e90e3645eae34f1e60eeb005ba3a3d33f178e8 # v6.19.2
         with:
           context: . # So action will not pull the repository again
           file: ./script/hassfest/docker/Dockerfile
@@ -556,7 +599,7 @@ jobs:
 
       - name: Generate artifact attestation
         if: needs.init.outputs.channel != 'dev' && needs.init.outputs.publish == 'true'
-        uses: actions/attest@59d89421af93a897026c735860bf21b6eb4f7b26 # v4.1.0
+        uses: actions/attest-build-provenance@96278af6caaf10aea03fd8d33a09a777ca52d62f # v3.2.0
         with:
           subject-name: ${{ env.HASSFEST_IMAGE_NAME }}
           subject-digest: ${{ steps.push.outputs.digest }}

.github/workflows/ci.yaml

@@ -40,8 +40,9 @@ env:
   CACHE_VERSION: 3
   UV_CACHE_VERSION: 1
   MYPY_CACHE_VERSION: 1
-  HA_SHORT_VERSION: "2026.4"
-  ADDITIONAL_PYTHON_VERSIONS: "[]"
+  HA_SHORT_VERSION: "2026.3"
+  DEFAULT_PYTHON: "3.14.2"
+  ALL_PYTHON_VERSIONS: "['3.14.2']"
   # 10.3 is the oldest supported version
   # - 10.3.32 is the version currently shipped with Synology (as of 17 Feb 2022)
   # 10.6 is the current long-term-support
@@ -120,7 +121,7 @@ jobs:
         run: |
           echo "key=$(lsb_release -rs)-apt-${CACHE_VERSION}-${HA_SHORT_VERSION}" >> $GITHUB_OUTPUT
       - name: Filter for core changes
-        uses: dorny/paths-filter@fbd0ab8f3e69293af611ebaee6363fc25e6d187d # v4.0.1
+        uses: dorny/paths-filter@de90cc6fb38fc0963ad72b210f1f284cd68cea36 # v3.0.2
         id: core
         with:
           filters: .core_files.yaml
@@ -135,7 +136,7 @@ jobs:
           echo "Result:"
           cat .integration_paths.yaml
       - name: Filter for integration changes
-        uses: dorny/paths-filter@fbd0ab8f3e69293af611ebaee6363fc25e6d187d # v4.0.1
+        uses: dorny/paths-filter@de90cc6fb38fc0963ad72b210f1f284cd68cea36 # v3.0.2
         id: integrations
         with:
           filters: .integration_paths.yaml
@@ -165,11 +166,6 @@ jobs:
           tests_glob=""
           lint_only=""
           skip_coverage=""
-          default_python=$(cat .python-version)
-          all_python_versions=$(jq -cn \
-            --arg default_python "${default_python}" \
-            --argjson additional_python_versions "${ADDITIONAL_PYTHON_VERSIONS}" \
-            '[$default_python] + $additional_python_versions')
 
           if [[ "${INTEGRATION_CHANGES}" != "[]" ]];
           then
@@ -239,8 +235,8 @@ jobs:
           echo "mariadb_groups=${mariadb_groups}" >> $GITHUB_OUTPUT
           echo "postgresql_groups: ${postgresql_groups}"
           echo "postgresql_groups=${postgresql_groups}" >> $GITHUB_OUTPUT
-          echo "python_versions: ${all_python_versions}"
-          echo "python_versions=${all_python_versions}" >> $GITHUB_OUTPUT
+          echo "python_versions: ${ALL_PYTHON_VERSIONS}"
+          echo "python_versions=${ALL_PYTHON_VERSIONS}" >> $GITHUB_OUTPUT
           echo "test_full_suite: ${test_full_suite}"
           echo "test_full_suite=${test_full_suite}" >> $GITHUB_OUTPUT
           echo "integrations_glob: ${integrations_glob}"
@@ -456,7 +452,7 @@ jobs:
           python --version
           uv pip freeze >> pip_freeze.txt
       - name: Upload pip_freeze artifact
-        uses: actions/upload-artifact@bbbca2ddaa5d8feaa63e36b76fdaad77386f024f # v7.0.0
+        uses: actions/upload-artifact@b7c566a772e6b6bfb58ed0dc250532a479d7789f # v6.0.0
         with:
           name: pip-freeze-${{ matrix.python-version }}
           path: pip_freeze.txt
@@ -507,13 +503,13 @@ jobs:
         uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
         with:
           persist-credentials: false
-      - name: Set up Python
+      - name: Set up Python ${{ env.DEFAULT_PYTHON }}
         id: python
         uses: actions/setup-python@a309ff8b426b58ec0e2a45f0f869d46889d02405 # v6.2.0
         with:
-          python-version-file: ".python-version"
+          python-version: ${{ env.DEFAULT_PYTHON }}
           check-latest: true
-      - name: Restore full Python virtual environment
+      - name: Restore full Python ${{ env.DEFAULT_PYTHON }} virtual environment
         id: cache-venv
         uses: actions/cache/restore@cdf6c1fa76f9f475f3d7449005a359c84ca0f306 # v5.0.3
         with:
@@ -544,13 +540,13 @@ jobs:
         uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
         with:
           persist-credentials: false
-      - name: Set up Python
+      - name: Set up Python ${{ env.DEFAULT_PYTHON }}
         id: python
         uses: actions/setup-python@a309ff8b426b58ec0e2a45f0f869d46889d02405 # v6.2.0
         with:
-          python-version-file: ".python-version"
+          python-version: ${{ env.DEFAULT_PYTHON }}
           check-latest: true
-      - name: Restore full Python virtual environment
+      - name: Restore full Python ${{ env.DEFAULT_PYTHON }} virtual environment
         id: cache-venv
         uses: actions/cache/restore@cdf6c1fa76f9f475f3d7449005a359c84ca0f306 # v5.0.3
         with:
@@ -580,11 +576,11 @@ jobs:
         uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
         with:
           persist-credentials: false
-      - name: Set up Python
+      - name: Set up Python ${{ env.DEFAULT_PYTHON }}
         id: python
         uses: actions/setup-python@a309ff8b426b58ec0e2a45f0f869d46889d02405 # v6.2.0
         with:
-          python-version-file: ".python-version"
+          python-version: ${{ env.DEFAULT_PYTHON }}
           check-latest: true
       - name: Run gen_copilot_instructions.py
         run: |
@@ -609,7 +605,7 @@ jobs:
         with:
           persist-credentials: false
       - name: Dependency review
-        uses: actions/dependency-review-action@2031cfc080254a8a887f58cffee85186f0e49e48 # v4.9.0
+        uses: actions/dependency-review-action@3c4e3dcb1aa7874d2c16be7d79418e9b7efd6261 # v4.8.2
         with:
           license-check: false # We use our own license audit checks
 
@@ -657,7 +653,7 @@ jobs:
           . venv/bin/activate
           python -m script.licenses extract --output-file=licenses-${PYTHON_VERSION}.json
       - name: Upload licenses
-        uses: actions/upload-artifact@bbbca2ddaa5d8feaa63e36b76fdaad77386f024f # v7.0.0
+        uses: actions/upload-artifact@b7c566a772e6b6bfb58ed0dc250532a479d7789f # v6.0.0
         with:
           name: licenses-${{ github.run_number }}-${{ matrix.python-version }}
           path: licenses-${{ matrix.python-version }}.json
@@ -686,13 +682,13 @@ jobs:
         uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
         with:
           persist-credentials: false
-      - name: Set up Python
+      - name: Set up Python ${{ env.DEFAULT_PYTHON }}
         id: python
         uses: actions/setup-python@a309ff8b426b58ec0e2a45f0f869d46889d02405 # v6.2.0
         with:
-          python-version-file: ".python-version"
+          python-version: ${{ env.DEFAULT_PYTHON }}
           check-latest: true
-      - name: Restore full Python virtual environment
+      - name: Restore full Python ${{ env.DEFAULT_PYTHON }} virtual environment
         id: cache-venv
         uses: actions/cache/restore@cdf6c1fa76f9f475f3d7449005a359c84ca0f306 # v5.0.3
         with:
@@ -739,13 +735,13 @@ jobs:
         uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
         with:
           persist-credentials: false
-      - name: Set up Python
+      - name: Set up Python ${{ env.DEFAULT_PYTHON }}
         id: python
         uses: actions/setup-python@a309ff8b426b58ec0e2a45f0f869d46889d02405 # v6.2.0
         with:
-          python-version-file: ".python-version"
+          python-version: ${{ env.DEFAULT_PYTHON }}
           check-latest: true
-      - name: Restore full Python virtual environment
+      - name: Restore full Python ${{ env.DEFAULT_PYTHON }} virtual environment
         id: cache-venv
         uses: actions/cache/restore@cdf6c1fa76f9f475f3d7449005a359c84ca0f306 # v5.0.3
         with:
@@ -790,11 +786,11 @@ jobs:
         uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
         with:
           persist-credentials: false
-      - name: Set up Python
+      - name: Set up Python ${{ env.DEFAULT_PYTHON }}
         id: python
         uses: actions/setup-python@a309ff8b426b58ec0e2a45f0f869d46889d02405 # v6.2.0
         with:
-          python-version-file: ".python-version"
+          python-version: ${{ env.DEFAULT_PYTHON }}
           check-latest: true
       - name: Generate partial mypy restore key
         id: generate-mypy-key
@@ -802,7 +798,7 @@ jobs:
           mypy_version=$(cat requirements_test.txt | grep 'mypy.*=' | cut -d '=' -f 3)
           echo "version=${mypy_version}" >> $GITHUB_OUTPUT
           echo "key=mypy-${MYPY_CACHE_VERSION}-${mypy_version}-${HA_SHORT_VERSION}-$(date -u '+%Y-%m-%dT%H:%M:%s')" >> $GITHUB_OUTPUT
-      - name: Restore full Python virtual environment
+      - name: Restore full Python ${{ env.DEFAULT_PYTHON }} virtual environment
         id: cache-venv
         uses: actions/cache/restore@cdf6c1fa76f9f475f3d7449005a359c84ca0f306 # v5.0.3
         with:
@@ -852,6 +848,10 @@ jobs:
     needs:
       - info
       - base
+      - gen-requirements-all
+      - hassfest
+      - prek
+      - mypy
     steps:
       - name: Restore apt cache
         uses: actions/cache/restore@cdf6c1fa76f9f475f3d7449005a359c84ca0f306 # v5.0.3
@@ -879,13 +879,13 @@ jobs:
         uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
         with:
           persist-credentials: false
-      - name: Set up Python
+      - name: Set up Python ${{ env.DEFAULT_PYTHON }}
         id: python
         uses: actions/setup-python@a309ff8b426b58ec0e2a45f0f869d46889d02405 # v6.2.0
         with:
-          python-version-file: ".python-version"
+          python-version: ${{ env.DEFAULT_PYTHON }}
           check-latest: true
-      - name: Restore full Python virtual environment
+      - name: Restore full Python ${{ env.DEFAULT_PYTHON }} virtual environment
         id: cache-venv
         uses: actions/cache/restore@cdf6c1fa76f9f475f3d7449005a359c84ca0f306 # v5.0.3
         with:
@@ -901,7 +901,7 @@ jobs:
           . venv/bin/activate
           python -m script.split_tests ${TEST_GROUP_COUNT} tests
       - name: Upload pytest_buckets
-        uses: actions/upload-artifact@bbbca2ddaa5d8feaa63e36b76fdaad77386f024f # v7.0.0
+        uses: actions/upload-artifact@b7c566a772e6b6bfb58ed0dc250532a479d7789f # v6.0.0
         with:
           name: pytest_buckets
           path: pytest_buckets.txt
@@ -978,7 +978,7 @@ jobs:
         run: |
           echo "::add-matcher::.github/workflows/matchers/pytest-slow.json"
       - name: Download pytest_buckets
-        uses: actions/download-artifact@3e5f45b2cfb9172054b4087a40e8e0b5a5461e7c # v8.0.1
+        uses: actions/download-artifact@37930b1c2abaa49bbe596cd826c3c89aef350131 # v7.0.0
         with:
           name: pytest_buckets
       - name: Compile English translations
@@ -1020,14 +1020,14 @@ jobs:
               2>&1 | tee pytest-${PYTHON_VERSION}-${TEST_GROUP}.txt
       - name: Upload pytest output
         if: success() || failure() && steps.pytest-full.conclusion == 'failure'
-        uses: actions/upload-artifact@bbbca2ddaa5d8feaa63e36b76fdaad77386f024f # v7.0.0
+        uses: actions/upload-artifact@b7c566a772e6b6bfb58ed0dc250532a479d7789f # v6.0.0
         with:
           name: pytest-${{ github.run_number }}-${{ matrix.python-version }}-${{ matrix.group }}
           path: pytest-*.txt
           overwrite: true
       - name: Upload coverage artifact
         if: needs.info.outputs.skip_coverage != 'true'
-        uses: actions/upload-artifact@bbbca2ddaa5d8feaa63e36b76fdaad77386f024f # v7.0.0
+        uses: actions/upload-artifact@b7c566a772e6b6bfb58ed0dc250532a479d7789f # v6.0.0
         with:
           name: coverage-${{ matrix.python-version }}-${{ matrix.group }}
           path: coverage.xml
@@ -1040,7 +1040,7 @@ jobs:
           mv "junit.xml-tmp" "junit.xml"
       - name: Upload test results artifact
         if: needs.info.outputs.skip_coverage != 'true' && !cancelled()
-        uses: actions/upload-artifact@bbbca2ddaa5d8feaa63e36b76fdaad77386f024f # v7.0.0
+        uses: actions/upload-artifact@b7c566a772e6b6bfb58ed0dc250532a479d7789f # v6.0.0
         with:
           name: test-results-full-${{ matrix.python-version }}-${{ matrix.group }}
           path: junit.xml
@@ -1177,7 +1177,7 @@ jobs:
               2>&1 | tee pytest-${PYTHON_VERSION}-${mariadb}.txt
       - name: Upload pytest output
         if: success() || failure() && steps.pytest-partial.conclusion == 'failure'
-        uses: actions/upload-artifact@bbbca2ddaa5d8feaa63e36b76fdaad77386f024f # v7.0.0
+        uses: actions/upload-artifact@b7c566a772e6b6bfb58ed0dc250532a479d7789f # v6.0.0
         with:
           name: pytest-${{ github.run_number }}-${{ matrix.python-version }}-${{
             steps.pytest-partial.outputs.mariadb }}
@@ -1185,7 +1185,7 @@ jobs:
           overwrite: true
       - name: Upload coverage artifact
         if: needs.info.outputs.skip_coverage != 'true'
-        uses: actions/upload-artifact@bbbca2ddaa5d8feaa63e36b76fdaad77386f024f # v7.0.0
+        uses: actions/upload-artifact@b7c566a772e6b6bfb58ed0dc250532a479d7789f # v6.0.0
         with:
           name: coverage-${{ matrix.python-version }}-${{
             steps.pytest-partial.outputs.mariadb }}
@@ -1199,7 +1199,7 @@ jobs:
           mv "junit.xml-tmp" "junit.xml"
       - name: Upload test results artifact
         if: needs.info.outputs.skip_coverage != 'true' && !cancelled()
-        uses: actions/upload-artifact@bbbca2ddaa5d8feaa63e36b76fdaad77386f024f # v7.0.0
+        uses: actions/upload-artifact@b7c566a772e6b6bfb58ed0dc250532a479d7789f # v6.0.0
         with:
           name: test-results-mariadb-${{ matrix.python-version }}-${{
             steps.pytest-partial.outputs.mariadb }}
@@ -1338,7 +1338,7 @@ jobs:
               2>&1 | tee pytest-${PYTHON_VERSION}-${postgresql}.txt
       - name: Upload pytest output
         if: success() || failure() && steps.pytest-partial.conclusion == 'failure'
-        uses: actions/upload-artifact@bbbca2ddaa5d8feaa63e36b76fdaad77386f024f # v7.0.0
+        uses: actions/upload-artifact@b7c566a772e6b6bfb58ed0dc250532a479d7789f # v6.0.0
         with:
           name: pytest-${{ github.run_number }}-${{ matrix.python-version }}-${{
             steps.pytest-partial.outputs.postgresql }}
@@ -1346,7 +1346,7 @@ jobs:
           overwrite: true
       - name: Upload coverage artifact
         if: needs.info.outputs.skip_coverage != 'true'
-        uses: actions/upload-artifact@bbbca2ddaa5d8feaa63e36b76fdaad77386f024f # v7.0.0
+        uses: actions/upload-artifact@b7c566a772e6b6bfb58ed0dc250532a479d7789f # v6.0.0
         with:
           name: coverage-${{ matrix.python-version }}-${{
             steps.pytest-partial.outputs.postgresql }}
@@ -1360,7 +1360,7 @@ jobs:
           mv "junit.xml-tmp" "junit.xml"
       - name: Upload test results artifact
         if: needs.info.outputs.skip_coverage != 'true' && !cancelled()
-        uses: actions/upload-artifact@bbbca2ddaa5d8feaa63e36b76fdaad77386f024f # v7.0.0
+        uses: actions/upload-artifact@b7c566a772e6b6bfb58ed0dc250532a479d7789f # v6.0.0
         with:
           name: test-results-postgres-${{ matrix.python-version }}-${{
             steps.pytest-partial.outputs.postgresql }}
@@ -1387,7 +1387,7 @@ jobs:
         with:
           persist-credentials: false
       - name: Download all coverage artifacts
-        uses: actions/download-artifact@3e5f45b2cfb9172054b4087a40e8e0b5a5461e7c # v8.0.1
+        uses: actions/download-artifact@37930b1c2abaa49bbe596cd826c3c89aef350131 # v7.0.0
         with:
           pattern: coverage-*
       - name: Upload coverage to Codecov
@@ -1396,7 +1396,7 @@ jobs:
         with:
           fail_ci_if_error: true
           flags: full-suite
-          token: ${{ secrets.CODECOV_TOKEN }} # zizmor: ignore[secrets-outside-env]
+          token: ${{ secrets.CODECOV_TOKEN }}
 
   pytest-partial:
     name: Run tests Python ${{ matrix.python-version }} (${{ matrix.group }})
@@ -1514,14 +1514,14 @@ jobs:
               2>&1 | tee pytest-${PYTHON_VERSION}-${TEST_GROUP}.txt
       - name: Upload pytest output
         if: success() || failure() && steps.pytest-partial.conclusion == 'failure'
-        uses: actions/upload-artifact@bbbca2ddaa5d8feaa63e36b76fdaad77386f024f # v7.0.0
+        uses: actions/upload-artifact@b7c566a772e6b6bfb58ed0dc250532a479d7789f # v6.0.0
         with:
           name: pytest-${{ github.run_number }}-${{ matrix.python-version }}-${{ matrix.group }}
           path: pytest-*.txt
           overwrite: true
       - name: Upload coverage artifact
         if: needs.info.outputs.skip_coverage != 'true'
-        uses: actions/upload-artifact@bbbca2ddaa5d8feaa63e36b76fdaad77386f024f # v7.0.0
+        uses: actions/upload-artifact@b7c566a772e6b6bfb58ed0dc250532a479d7789f # v6.0.0
         with:
           name: coverage-${{ matrix.python-version }}-${{ matrix.group }}
           path: coverage.xml
@@ -1534,7 +1534,7 @@ jobs:
           mv "junit.xml-tmp" "junit.xml"
       - name: Upload test results artifact
         if: needs.info.outputs.skip_coverage != 'true' && !cancelled()
-        uses: actions/upload-artifact@bbbca2ddaa5d8feaa63e36b76fdaad77386f024f # v7.0.0
+        uses: actions/upload-artifact@b7c566a772e6b6bfb58ed0dc250532a479d7789f # v6.0.0
         with:
           name: test-results-partial-${{ matrix.python-version }}-${{ matrix.group }}
           path: junit.xml
@@ -1558,7 +1558,7 @@ jobs:
         with:
           persist-credentials: false
       - name: Download all coverage artifacts
-        uses: actions/download-artifact@3e5f45b2cfb9172054b4087a40e8e0b5a5461e7c # v8.0.1
+        uses: actions/download-artifact@37930b1c2abaa49bbe596cd826c3c89aef350131 # v7.0.0
         with:
           pattern: coverage-*
       - name: Upload coverage to Codecov
@@ -1566,7 +1566,7 @@ jobs:
         uses: codecov/codecov-action@671740ac38dd9b0130fbe1cec585b89eea48d3de # v5.5.2
         with:
           fail_ci_if_error: true
-          token: ${{ secrets.CODECOV_TOKEN }} # zizmor: ignore[secrets-outside-env]
+          token: ${{ secrets.CODECOV_TOKEN }}
 
   upload-test-results:
     name: Upload test results to Codecov
@@ -1587,7 +1587,7 @@ jobs:
       && needs.info.outputs.skip_coverage != 'true' && !cancelled()
     steps:
       - name: Download all coverage artifacts
-        uses: actions/download-artifact@3e5f45b2cfb9172054b4087a40e8e0b5a5461e7c # v8.0.1
+        uses: actions/download-artifact@37930b1c2abaa49bbe596cd826c3c89aef350131 # v7.0.0
         with:
           pattern: test-results-*
       - name: Upload test results to Codecov

.github/workflows/codeql.yml

@@ -28,11 +28,11 @@ jobs:
           persist-credentials: false
 
       - name: Initialize CodeQL
-        uses: github/codeql-action/init@0d579ffd059c29b07949a3cce3983f0780820c98 # v4.32.6
+        uses: github/codeql-action/init@9e907b5e64f6b83e7804b09294d44122997950d6 # v4.32.3
         with:
           languages: python
 
       - name: Perform CodeQL Analysis
-        uses: github/codeql-action/analyze@0d579ffd059c29b07949a3cce3983f0780820c98 # v4.32.6
+        uses: github/codeql-action/analyze@9e907b5e64f6b83e7804b09294d44122997950d6 # v4.32.3
         with:
           category: "/language:python"

.github/workflows/detect-duplicate-issues.yml

@@ -236,7 +236,7 @@ jobs:
       - name: Detect duplicates using AI
         id: ai_detection
         if: steps.extract.outputs.should_continue == 'true' && steps.fetch_similar.outputs.has_similar == 'true'
-        uses: actions/ai-inference@e09e65981758de8b2fdab13c2bfb7c7d5493b0b6 # v2.0.7
+        uses: actions/ai-inference@a380166897b5408b8fb7dddd148142794cb5624a # v2.0.6
         with:
           model: openai/gpt-4o
           system-prompt: |

.github/workflows/detect-non-english-issues.yml

@@ -62,7 +62,7 @@ jobs:
       - name: Detect language using AI
         id: ai_language_detection
         if: steps.detect_language.outputs.should_continue == 'true'
-        uses: actions/ai-inference@e09e65981758de8b2fdab13c2bfb7c7d5493b0b6 # v2.0.7
+        uses: actions/ai-inference@a380166897b5408b8fb7dddd148142794cb5624a # v2.0.6
         with:
           model: openai/gpt-4o-mini
           system-prompt: |

.github/workflows/stale.yml

@@ -58,8 +58,8 @@ jobs:
         # v1.7.0
         uses: tibdex/github-app-token@3beb63f4bd073e61482598c45c71c1019b59b73a
         with:
-          app_id: ${{ secrets.ISSUE_TRIAGE_APP_ID }} # zizmor: ignore[secrets-outside-env]
-          private_key: ${{ secrets.ISSUE_TRIAGE_APP_PEM }} # zizmor: ignore[secrets-outside-env]
+          app_id: ${{ secrets.ISSUE_TRIAGE_APP_ID }}
+          private_key: ${{ secrets.ISSUE_TRIAGE_APP_PEM }}
 
       # The 90 day stale policy for issues
       # Used for:

.github/workflows/translations.yml

@@ -15,6 +15,9 @@ concurrency:
   group: ${{ github.workflow }}
   cancel-in-progress: true
 
+env:
+  DEFAULT_PYTHON: "3.14.2"
+
 jobs:
   upload:
     name: Upload
@@ -26,13 +29,13 @@ jobs:
         with:
           persist-credentials: false
 
-      - name: Set up Python
+      - name: Set up Python ${{ env.DEFAULT_PYTHON }}
         uses: actions/setup-python@a309ff8b426b58ec0e2a45f0f869d46889d02405 # v6.2.0
         with:
-          python-version-file: ".python-version"
+          python-version: ${{ env.DEFAULT_PYTHON }}
 
       - name: Upload Translations
         env:
-          LOKALISE_TOKEN: ${{ secrets.LOKALISE_TOKEN }} # zizmor: ignore[secrets-outside-env]
+          LOKALISE_TOKEN: ${{ secrets.LOKALISE_TOKEN }}
         run: |
           python3 -m script.translations upload

.github/workflows/wheels.yml

@@ -16,6 +16,9 @@ on:
       - "requirements.txt"
       - "script/gen_requirements_all.py"
 
+env:
+  DEFAULT_PYTHON: "3.14.2"
+
 permissions: {}
 
 concurrency:
@@ -33,11 +36,11 @@ jobs:
         with:
           persist-credentials: false
 
-      - name: Set up Python
+      - name: Set up Python ${{ env.DEFAULT_PYTHON }}
         id: python
         uses: actions/setup-python@a309ff8b426b58ec0e2a45f0f869d46889d02405 # v6.2.0
         with:
-          python-version-file: ".python-version"
+          python-version: ${{ env.DEFAULT_PYTHON }}
           check-latest: true
 
       - name: Create Python virtual environment
@@ -74,7 +77,7 @@ jobs:
           ) > .env_file
 
       - name: Upload env_file
-        uses: actions/upload-artifact@bbbca2ddaa5d8feaa63e36b76fdaad77386f024f # v7.0.0
+        uses: actions/upload-artifact@b7c566a772e6b6bfb58ed0dc250532a479d7789f # v6.0.0
         with:
           name: env_file
           path: ./.env_file
@@ -82,7 +85,7 @@ jobs:
           overwrite: true
 
       - name: Upload requirements_diff
-        uses: actions/upload-artifact@bbbca2ddaa5d8feaa63e36b76fdaad77386f024f # v7.0.0
+        uses: actions/upload-artifact@b7c566a772e6b6bfb58ed0dc250532a479d7789f # v6.0.0
         with:
           name: requirements_diff
           path: ./requirements_diff.txt
@@ -94,7 +97,7 @@ jobs:
           python -m script.gen_requirements_all ci
 
       - name: Upload requirements_all_wheels
-        uses: actions/upload-artifact@bbbca2ddaa5d8feaa63e36b76fdaad77386f024f # v7.0.0
+        uses: actions/upload-artifact@b7c566a772e6b6bfb58ed0dc250532a479d7789f # v6.0.0
         with:
           name: requirements_all_wheels
           path: ./requirements_all_wheels_*.txt
@@ -107,7 +110,7 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        abi: ["cp314"]
+        abi: ["cp313", "cp314"]
         arch: ["amd64", "aarch64"]
         include:
           - arch: amd64
@@ -121,12 +124,12 @@ jobs:
           persist-credentials: false
 
       - name: Download env_file
-        uses: actions/download-artifact@3e5f45b2cfb9172054b4087a40e8e0b5a5461e7c # v8.0.1
+        uses: actions/download-artifact@37930b1c2abaa49bbe596cd826c3c89aef350131 # v7.0.0
         with:
           name: env_file
 
       - name: Download requirements_diff
-        uses: actions/download-artifact@3e5f45b2cfb9172054b4087a40e8e0b5a5461e7c # v8.0.1
+        uses: actions/download-artifact@37930b1c2abaa49bbe596cd826c3c89aef350131 # v7.0.0
         with:
           name: requirements_diff
 
@@ -142,7 +145,7 @@ jobs:
           abi: ${{ matrix.abi }}
           tag: musllinux_1_2
           arch: ${{ matrix.arch }}
-          wheels-key: ${{ secrets.WHEELS_KEY }} # zizmor: ignore[secrets-outside-env]
+          wheels-key: ${{ secrets.WHEELS_KEY }}
           env-file: true
           apk: "libffi-dev;openssl-dev;yaml-dev;nasm;zlib-ng-dev"
           skip-binary: aiohttp;multidict;propcache;yarl;SQLAlchemy
@@ -158,7 +161,7 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        abi: ["cp314"]
+        abi: ["cp313", "cp314"]
         arch: ["amd64", "aarch64"]
         include:
           - arch: amd64
@@ -172,17 +175,17 @@ jobs:
           persist-credentials: false
 
       - name: Download env_file
-        uses: actions/download-artifact@3e5f45b2cfb9172054b4087a40e8e0b5a5461e7c # v8.0.1
+        uses: actions/download-artifact@37930b1c2abaa49bbe596cd826c3c89aef350131 # v7.0.0
         with:
           name: env_file
 
       - name: Download requirements_diff
-        uses: actions/download-artifact@3e5f45b2cfb9172054b4087a40e8e0b5a5461e7c # v8.0.1
+        uses: actions/download-artifact@37930b1c2abaa49bbe596cd826c3c89aef350131 # v7.0.0
         with:
           name: requirements_diff
 
       - name: Download requirements_all_wheels
-        uses: actions/download-artifact@3e5f45b2cfb9172054b4087a40e8e0b5a5461e7c # v8.0.1
+        uses: actions/download-artifact@37930b1c2abaa49bbe596cd826c3c89aef350131 # v7.0.0
         with:
           name: requirements_all_wheels
 
@@ -200,10 +203,10 @@ jobs:
           abi: ${{ matrix.abi }}
           tag: musllinux_1_2
           arch: ${{ matrix.arch }}
-          wheels-key: ${{ secrets.WHEELS_KEY }} # zizmor: ignore[secrets-outside-env]
+          wheels-key: ${{ secrets.WHEELS_KEY }}
           env-file: true
           apk: "bluez-dev;libffi-dev;openssl-dev;glib-dev;eudev-dev;libxml2-dev;libxslt-dev;libpng-dev;libjpeg-turbo-dev;tiff-dev;gmp-dev;mpfr-dev;mpc1-dev;ffmpeg-dev;yaml-dev;openblas-dev;fftw-dev;lapack-dev;gfortran;blas-dev;eigen-dev;freetype-dev;glew-dev;harfbuzz-dev;hdf5-dev;libdc1394-dev;libtbb-dev;mesa-dev;openexr-dev;openjpeg-dev;uchardet-dev;nasm;zlib-ng-dev"
           skip-binary: aiohttp;charset-normalizer;grpcio;multidict;SQLAlchemy;propcache;protobuf;pymicro-vad;yarl
           constraints: "homeassistant/package_constraints.txt"
           requirements-diff: "requirements_diff.txt"
-          requirements: "requirements_all_wheels_${{ matrix.arch }}.txt"
+          requirements: "requirements_all.txt"

.pre-commit-config.yaml

@@ -18,7 +18,7 @@ repos:
         exclude_types: [csv, json, html]
         exclude: ^tests/fixtures/|homeassistant/generated/|tests/components/.*/snapshots/
   - repo: https://github.com/zizmorcore/zizmor-pre-commit
-    rev: v1.23.1
+    rev: v1.22.0
     hooks:
       - id: zizmor
         args:

.python-version

@@ -1 +1 @@
-3.14.2
+3.14

.strict-typing

@@ -123,6 +123,7 @@ homeassistant.components.blueprint.*
 homeassistant.components.bluesound.*
 homeassistant.components.bluetooth.*
 homeassistant.components.bluetooth_adapters.*
+homeassistant.components.bmw_connected_drive.*
 homeassistant.components.bond.*
 homeassistant.components.bosch_alarm.*
 homeassistant.components.braviatv.*
@@ -137,7 +138,6 @@ homeassistant.components.calendar.*
 homeassistant.components.cambridge_audio.*
 homeassistant.components.camera.*
 homeassistant.components.canary.*
-homeassistant.components.casper_glow.*
 homeassistant.components.cert_expiry.*
 homeassistant.components.clickatell.*
 homeassistant.components.clicksend.*
@@ -174,7 +174,6 @@ homeassistant.components.dnsip.*
 homeassistant.components.doorbird.*
 homeassistant.components.dormakaba_dkey.*
 homeassistant.components.downloader.*
-homeassistant.components.dropbox.*
 homeassistant.components.droplet.*
 homeassistant.components.dsmr.*
 homeassistant.components.duckdns.*
@@ -214,7 +213,6 @@ homeassistant.components.flexit_bacnet.*
 homeassistant.components.flux_led.*
 homeassistant.components.folder_watcher.*
 homeassistant.components.forecast_solar.*
-homeassistant.components.freshr.*
 homeassistant.components.fritz.*
 homeassistant.components.fritzbox.*
 homeassistant.components.fritzbox_callmonitor.*
@@ -274,12 +272,10 @@ homeassistant.components.homekit_controller.storage
 homeassistant.components.homekit_controller.utils
 homeassistant.components.homewizard.*
 homeassistant.components.homeworks.*
-homeassistant.components.hr_energy_qube.*
 homeassistant.components.http.*
 homeassistant.components.huawei_lte.*
 homeassistant.components.humidifier.*
 homeassistant.components.husqvarna_automower.*
-homeassistant.components.huum.*
 homeassistant.components.hydrawise.*
 homeassistant.components.hyperion.*
 homeassistant.components.hypontech.*
@@ -293,7 +289,6 @@ homeassistant.components.imgw_pib.*
 homeassistant.components.immich.*
 homeassistant.components.incomfort.*
 homeassistant.components.inels.*
-homeassistant.components.infrared.*
 homeassistant.components.input_button.*
 homeassistant.components.input_select.*
 homeassistant.components.input_text.*
@@ -329,7 +324,6 @@ homeassistant.components.ld2410_ble.*
 homeassistant.components.led_ble.*
 homeassistant.components.lektrico.*
 homeassistant.components.letpot.*
-homeassistant.components.lg_infrared.*
 homeassistant.components.libre_hardware_monitor.*
 homeassistant.components.lidarr.*
 homeassistant.components.lifx.*
@@ -347,7 +341,6 @@ homeassistant.components.lookin.*
 homeassistant.components.lovelace.*
 homeassistant.components.luftdaten.*
 homeassistant.components.lunatone.*
-homeassistant.components.lutron.*
 homeassistant.components.madvr.*
 homeassistant.components.manual.*
 homeassistant.components.mastodon.*
@@ -551,7 +544,6 @@ homeassistant.components.tcp.*
 homeassistant.components.technove.*
 homeassistant.components.tedee.*
 homeassistant.components.telegram_bot.*
-homeassistant.components.teslemetry.*
 homeassistant.components.text.*
 homeassistant.components.thethingsnetwork.*
 homeassistant.components.threshold.*
@@ -575,7 +567,6 @@ homeassistant.components.trafikverket_train.*
 homeassistant.components.trafikverket_weatherstation.*
 homeassistant.components.transmission.*
 homeassistant.components.trend.*
-homeassistant.components.trmnl.*
 homeassistant.components.tts.*
 homeassistant.components.twentemilieu.*
 homeassistant.components.unifi.*

AGENTS.md

@@ -4,22 +4,325 @@ This repository contains the core of Home Assistant, a Python 3 based home autom
 
 ## Code Review Guidelines
 
+**When reviewing code, do NOT comment on:**
+- **Missing imports** - We use static analysis tooling to catch that
+- **Code formatting** - We have ruff as a formatting tool that will catch those if needed (unless specifically instructed otherwise in these instructions)
+
 **Git commit practices during review:**
 - **Do NOT amend, squash, or rebase commits after review has started** - Reviewers need to see what changed since their last review
 
+## Python Requirements
+
+- **Compatibility**: Python 3.13+
+- **Language Features**: Use the newest features when possible:
+  - Pattern matching
+  - Type hints
+  - f-strings (preferred over `%` or `.format()`)
+  - Dataclasses
+  - Walrus operator
+
+### Strict Typing (Platinum)
+- **Comprehensive Type Hints**: Add type hints to all functions, methods, and variables
+- **Custom Config Entry Types**: When using runtime_data:
+  ```python
+  type MyIntegrationConfigEntry = ConfigEntry[MyClient]
+  ```
+- **Library Requirements**: Include `py.typed` file for PEP-561 compliance
+
+## Code Quality Standards
+
+- **Formatting**: Ruff
+- **Linting**: PyLint and Ruff
+- **Type Checking**: MyPy
+- **Lint/Type/Format Fixes**: Always prefer addressing the underlying issue (e.g., import the typed source, update shared stubs, align with Ruff expectations, or correct formatting at the source) before disabling a rule, adding `# type: ignore`, or skipping a formatter. Treat suppressions and `noqa` comments as a last resort once no compliant fix exists
+- **Testing**: pytest with plain functions and fixtures
+- **Language**: American English for all code, comments, and documentation (use sentence case, including titles)
+
+### Writing Style Guidelines
+- **Tone**: Friendly and informative
+- **Perspective**: Use second-person ("you" and "your") for user-facing messages
+- **Inclusivity**: Use objective, non-discriminatory language
+- **Clarity**: Write for non-native English speakers
+- **Formatting in Messages**:
+  - Use backticks for: file paths, filenames, variable names, field entries
+  - Use sentence case for titles and messages (capitalize only the first word and proper nouns)
+  - Avoid abbreviations when possible
+
+### Documentation Standards
+- **File Headers**: Short and concise
+  ```python
+  """Integration for Peblar EV chargers."""
+  ```
+- **Method/Function Docstrings**: Required for all
+  ```python
+  async def async_setup_entry(hass: HomeAssistant, entry: PeblarConfigEntry) -> bool:
+      """Set up Peblar from a config entry."""
+  ```
+- **Comment Style**:
+  - Use clear, descriptive comments
+  - Explain the "why" not just the "what"
+  - Keep code block lines under 80 characters when possible
+  - Use progressive disclosure (simple explanation first, complex details later)
+
+## Async Programming
+
+- All external I/O operations must be async
+- **Best Practices**:
+  - Avoid sleeping in loops
+  - Avoid awaiting in loops - use `gather` instead
+  - No blocking calls
+  - Group executor jobs when possible - switching between event loop and executor is expensive
+
+### Blocking Operations
+- **Use Executor**: For blocking I/O operations
+  ```python
+  result = await hass.async_add_executor_job(blocking_function, args)
+  ```
+- **Never Block Event Loop**: Avoid file operations, `time.sleep()`, blocking HTTP calls
+- **Replace with Async**: Use `asyncio.sleep()` instead of `time.sleep()`
+
+### Thread Safety
+- **@callback Decorator**: For event loop safe functions
+  ```python
+  @callback
+  def async_update_callback(self, event):
+      """Safe to run in event loop."""
+      self.async_write_ha_state()
+  ```
+- **Sync APIs from Threads**: Use sync versions when calling from non-event loop threads
+- **Registry Changes**: Must be done in event loop thread
+
+### Error Handling
+- **Exception Types**: Choose most specific exception available
+  - `ServiceValidationError`: User input errors (preferred over `ValueError`)
+  - `HomeAssistantError`: Device communication failures
+  - `ConfigEntryNotReady`: Temporary setup issues (device offline)
+  - `ConfigEntryAuthFailed`: Authentication problems
+  - `ConfigEntryError`: Permanent setup issues
+- **Try/Catch Best Practices**:
+  - Only wrap code that can throw exceptions
+  - Keep try blocks minimal - process data after the try/catch
+  - **Avoid bare exceptions** except in specific cases:
+    - ❌ Generally not allowed: `except:` or `except Exception:`
+    - ✅ Allowed in config flows to ensure robustness
+    - ✅ Allowed in functions/methods that run in background tasks
+  - Bad pattern:
+    ```python
+    try:
+        data = await device.get_data()  # Can throw
+        # ❌ Don't process data inside try block
+        processed = data.get("value", 0) * 100
+        self._attr_native_value = processed
+    except DeviceError:
+        _LOGGER.error("Failed to get data")
+    ```
+  - Good pattern:
+    ```python
+    try:
+        data = await device.get_data()  # Can throw
+    except DeviceError:
+        _LOGGER.error("Failed to get data")
+        return
+
+    # ✅ Process data outside try block
+    processed = data.get("value", 0) * 100
+    self._attr_native_value = processed
+    ```
+- **Bare Exception Usage**:
+  ```python
+  # ❌ Not allowed in regular code
+  try:
+      data = await device.get_data()
+  except Exception:  # Too broad
+      _LOGGER.error("Failed")
+
+  # ✅ Allowed in config flow for robustness
+  async def async_step_user(self, user_input=None):
+      try:
+          await self._test_connection(user_input)
+      except Exception:  # Allowed here
+          errors["base"] = "unknown"
+
+  # ✅ Allowed in background tasks
+  async def _background_refresh():
+      try:
+          await coordinator.async_refresh()
+      except Exception:  # Allowed in task
+          _LOGGER.exception("Unexpected error in background task")
+  ```
+- **Setup Failure Patterns**:
+  ```python
+  try:
+      await device.async_setup()
+  except (asyncio.TimeoutError, TimeoutException) as ex:
+      raise ConfigEntryNotReady(f"Timeout connecting to {device.host}") from ex
+  except AuthFailed as ex:
+      raise ConfigEntryAuthFailed(f"Credentials expired for {device.name}") from ex
+  ```
+
+### Logging
+- **Format Guidelines**:
+  - No periods at end of messages
+  - No integration names/domains (added automatically)
+  - No sensitive data (keys, tokens, passwords)
+- Use debug level for non-user-facing messages
+- **Use Lazy Logging**:
+  ```python
+  _LOGGER.debug("This is a log message with %s", variable)
+  ```
+
+### Unavailability Logging
+- **Log Once**: When device/service becomes unavailable (info level)
+- **Log Recovery**: When device/service comes back online
+- **Implementation Pattern**:
+  ```python
+  _unavailable_logged: bool = False
+
+  if not self._unavailable_logged:
+      _LOGGER.info("The sensor is unavailable: %s", ex)
+      self._unavailable_logged = True
+  # On recovery:
+  if self._unavailable_logged:
+      _LOGGER.info("The sensor is back online")
+      self._unavailable_logged = False
+  ```
+
 ## Development Commands
 
-.vscode/tasks.json contains useful commands used for development.
+### Environment
+- **Local development (non-container)**: Activate the project venv before running commands: `source .venv/bin/activate`
+- **Dev container**: No activation needed, the environment is pre-configured
 
-## Python Syntax Notes
+### Code Quality & Linting
+- **Run all linters on all files**: `prek run --all-files`
+- **Run linters on staged files only**: `prek run`
+- **PyLint on everything** (slow): `pylint homeassistant`
+- **PyLint on specific folder**: `pylint homeassistant/components/my_integration`
+- **MyPy type checking (whole project)**: `mypy homeassistant/`
+- **MyPy on specific integration**: `mypy homeassistant/components/my_integration`
 
-- Python 3.14 explicitly allows `except TypeA, TypeB:` without parentheses.
+### Testing
+- **Quick test of changed files**: `pytest --timeout=10 --picked`
+- **Update test snapshots**: Add `--snapshot-update` to pytest command
+  - ⚠️ Omit test results after using `--snapshot-update`
+  - Always run tests again without the flag to verify snapshots
+- **Full test suite** (AVOID - very slow): `pytest ./tests`
 
-## Testing
+### Dependencies & Requirements
+- **Update generated files after dependency changes**: `python -m script.gen_requirements_all`
+- **Install all Python requirements**:
+  ```bash
+  uv pip install -r requirements_all.txt -r requirements.txt -r requirements_test.txt
+  ```
+- **Install test requirements only**:
+  ```bash
+  uv pip install -r requirements_test_all.txt -r requirements.txt
+  ```
 
-When writing or modifying tests, ensure all test function parameters have type annotations.
-Prefer concrete types (for example, `HomeAssistant`, `MockConfigEntry`, etc.) over `Any`.
+### Translations
+- **Update translations after strings.json changes**:
+  ```bash
+  python -m script.translations develop --all
+  ```
 
-## Good practices
+### Project Validation
+- **Run hassfest** (checks project structure and updates generated files):
+  ```bash
+  python -m script.hassfest
+  ```
 
-Integrations with Platinum or Gold level in the Integration Quality Scale reflect a high standard of code quality and maintainability. When looking for examples of something, these are good places to start. The level is indicated in the manifest.json of the integration.
+## Common Anti-Patterns & Best Practices
+
+### ❌ **Avoid These Patterns**
+```python
+# Blocking operations in event loop
+data = requests.get(url)  # ❌ Blocks event loop
+time.sleep(5)  # ❌ Blocks event loop
+
+# Reusing BleakClient instances
+self.client = BleakClient(address)
+await self.client.connect()
+# Later...
+await self.client.connect()  # ❌ Don't reuse
+
+# Hardcoded strings in code
+self._attr_name = "Temperature Sensor"  # ❌ Not translatable
+
+# Missing error handling
+data = await self.api.get_data()  # ❌ No exception handling
+
+# Storing sensitive data in diagnostics
+return {"api_key": entry.data[CONF_API_KEY]}  # ❌ Exposes secrets
+
+# Accessing hass.data directly in tests
+coordinator = hass.data[DOMAIN][entry.entry_id]  # ❌ Don't access hass.data
+
+# User-configurable polling intervals
+# In config flow
+vol.Optional("scan_interval", default=60): cv.positive_int  # ❌ Not allowed
+# In coordinator
+update_interval = timedelta(minutes=entry.data.get("scan_interval", 1))  # ❌ Not allowed
+
+# User-configurable config entry names (non-helper integrations)
+vol.Optional("name", default="My Device"): cv.string  # ❌ Not allowed in regular integrations
+
+# Too much code in try block
+try:
+    response = await client.get_data()  # Can throw
+    # ❌ Data processing should be outside try block
+    temperature = response["temperature"] / 10
+    humidity = response["humidity"]
+    self._attr_native_value = temperature
+except ClientError:
+    _LOGGER.error("Failed to fetch data")
+
+# Bare exceptions in regular code
+try:
+    value = await sensor.read_value()
+except Exception:  # ❌ Too broad - catch specific exceptions
+    _LOGGER.error("Failed to read sensor")
+```
+
+### ✅ **Use These Patterns Instead**
+```python
+# Async operations with executor
+data = await hass.async_add_executor_job(requests.get, url)
+await asyncio.sleep(5)  # ✅ Non-blocking
+
+# Fresh BleakClient instances
+client = BleakClient(address)  # ✅ New instance each time
+await client.connect()
+
+# Translatable entity names
+_attr_translation_key = "temperature_sensor"  # ✅ Translatable
+
+# Proper error handling
+try:
+    data = await self.api.get_data()
+except ApiException as err:
+    raise UpdateFailed(f"API error: {err}") from err
+
+# Redacted diagnostics data
+return async_redact_data(data, {"api_key", "password"})  # ✅ Safe
+
+# Test through proper integration setup and fixtures
+@pytest.fixture
+async def init_integration(hass, mock_config_entry, mock_api):
+    mock_config_entry.add_to_hass(hass)
+    await hass.config_entries.async_setup(mock_config_entry.entry_id)  # ✅ Proper setup
+
+# Integration-determined polling intervals (not user-configurable)
+SCAN_INTERVAL = timedelta(minutes=5)  # ✅ Common pattern: constant in const.py
+
+class MyCoordinator(DataUpdateCoordinator[MyData]):
+    def __init__(self, hass: HomeAssistant, client: MyClient, config_entry: ConfigEntry) -> None:
+        # ✅ Integration determines interval based on device capabilities, connection type, etc.
+        interval = timedelta(minutes=1) if client.is_local else SCAN_INTERVAL
+        super().__init__(
+            hass,
+            logger=LOGGER,
+            name=DOMAIN,
+            update_interval=interval,
+            config_entry=config_entry,  # ✅ Pass config_entry - it's accepted and recommended
+        )
+```

CODEOWNERS

@@ -186,8 +186,6 @@ build.json @home-assistant/supervisor
 /tests/components/auth/ @home-assistant/core
 /homeassistant/components/automation/ @home-assistant/core
 /tests/components/automation/ @home-assistant/core
-/homeassistant/components/autoskope/ @mcisk
-/tests/components/autoskope/ @mcisk
 /homeassistant/components/avea/ @pattyland
 /homeassistant/components/awair/ @ahayworth @ricohageman
 /tests/components/awair/ @ahayworth @ricohageman
@@ -214,8 +212,6 @@ build.json @home-assistant/supervisor
 /tests/components/balboa/ @garbled1 @natekspencer
 /homeassistant/components/bang_olufsen/ @mj23000
 /tests/components/bang_olufsen/ @mj23000
-/homeassistant/components/battery/ @home-assistant/core
-/tests/components/battery/ @home-assistant/core
 /homeassistant/components/bayesian/ @HarvsG
 /tests/components/bayesian/ @HarvsG
 /homeassistant/components/beewi_smartclim/ @alemuro
@@ -238,14 +234,14 @@ build.json @home-assistant/supervisor
 /tests/components/bluetooth/ @bdraco
 /homeassistant/components/bluetooth_adapters/ @bdraco
 /tests/components/bluetooth_adapters/ @bdraco
+/homeassistant/components/bmw_connected_drive/ @gerard33 @rikroe
+/tests/components/bmw_connected_drive/ @gerard33 @rikroe
 /homeassistant/components/bond/ @bdraco @prystupa @joshs85 @marciogranzotto
 /tests/components/bond/ @bdraco @prystupa @joshs85 @marciogranzotto
 /homeassistant/components/bosch_alarm/ @mag1024 @sanjay900
 /tests/components/bosch_alarm/ @mag1024 @sanjay900
 /homeassistant/components/bosch_shc/ @tschamm
 /tests/components/bosch_shc/ @tschamm
-/homeassistant/components/brands/ @home-assistant/core
-/tests/components/brands/ @home-assistant/core
 /homeassistant/components/braviatv/ @bieniu @Drafteed
 /tests/components/braviatv/ @bieniu @Drafteed
 /homeassistant/components/bring/ @miaucl @tr4nt0r
@@ -275,8 +271,6 @@ build.json @home-assistant/supervisor
 /tests/components/cambridge_audio/ @noahhusby
 /homeassistant/components/camera/ @home-assistant/core
 /tests/components/camera/ @home-assistant/core
-/homeassistant/components/casper_glow/ @mikeodr
-/tests/components/casper_glow/ @mikeodr
 /homeassistant/components/cast/ @emontnemery
 /tests/components/cast/ @emontnemery
 /homeassistant/components/ccm15/ @ocalvo
@@ -285,8 +279,6 @@ build.json @home-assistant/supervisor
 /tests/components/cert_expiry/ @jjlawren
 /homeassistant/components/chacon_dio/ @cnico
 /tests/components/chacon_dio/ @cnico
-/homeassistant/components/chess_com/ @joostlek
-/tests/components/chess_com/ @joostlek
 /homeassistant/components/cisco_ios/ @fbradyirl
 /homeassistant/components/cisco_mobility_express/ @fbradyirl
 /homeassistant/components/cisco_webex_teams/ @fbradyirl
@@ -389,8 +381,6 @@ build.json @home-assistant/supervisor
 /tests/components/dlna_dms/ @chishm
 /homeassistant/components/dnsip/ @gjohansson-ST
 /tests/components/dnsip/ @gjohansson-ST
-/homeassistant/components/door/ @home-assistant/core
-/tests/components/door/ @home-assistant/core
 /homeassistant/components/doorbird/ @oblogic7 @bdraco @flacjacket
 /tests/components/doorbird/ @oblogic7 @bdraco @flacjacket
 /homeassistant/components/dormakaba_dkey/ @emontnemery
@@ -401,8 +391,6 @@ build.json @home-assistant/supervisor
 /tests/components/dremel_3d_printer/ @tkdrob
 /homeassistant/components/drop_connect/ @ChandlerSystems @pfrazer
 /tests/components/drop_connect/ @ChandlerSystems @pfrazer
-/homeassistant/components/dropbox/ @bdr99
-/tests/components/dropbox/ @bdr99
 /homeassistant/components/droplet/ @sarahseidman
 /tests/components/droplet/ @sarahseidman
 /homeassistant/components/dsmr/ @Robbie1221
@@ -411,6 +399,8 @@ build.json @home-assistant/supervisor
 /tests/components/dsmr_reader/ @sorted-bits @glodenox @erwindouna
 /homeassistant/components/duckdns/ @tr4nt0r
 /tests/components/duckdns/ @tr4nt0r
+/homeassistant/components/duke_energy/ @hunterjm
+/tests/components/duke_energy/ @hunterjm
 /homeassistant/components/duotecno/ @cereal2nd
 /tests/components/duotecno/ @cereal2nd
 /homeassistant/components/dwd_weather_warnings/ @runningman84 @stephan192
@@ -559,8 +549,6 @@ build.json @home-assistant/supervisor
 /tests/components/freebox/ @hacf-fr @Quentame
 /homeassistant/components/freedompro/ @stefano055415
 /tests/components/freedompro/ @stefano055415
-/homeassistant/components/freshr/ @SierraNL
-/tests/components/freshr/ @SierraNL
 /homeassistant/components/fressnapf_tracker/ @eifinger
 /tests/components/fressnapf_tracker/ @eifinger
 /homeassistant/components/fritz/ @AaronDavidSchneider @chemelli74 @mib1185
@@ -579,14 +567,10 @@ build.json @home-assistant/supervisor
 /tests/components/fully_kiosk/ @cgarwood
 /homeassistant/components/fyta/ @dontinelli
 /tests/components/fyta/ @dontinelli
-/homeassistant/components/garage_door/ @home-assistant/core
-/tests/components/garage_door/ @home-assistant/core
 /homeassistant/components/garages_amsterdam/ @klaasnicolaas
 /tests/components/garages_amsterdam/ @klaasnicolaas
 /homeassistant/components/gardena_bluetooth/ @elupus
 /tests/components/gardena_bluetooth/ @elupus
-/homeassistant/components/gate/ @home-assistant/core
-/tests/components/gate/ @home-assistant/core
 /homeassistant/components/gdacs/ @exxamalte
 /tests/components/gdacs/ @exxamalte
 /homeassistant/components/generic/ @davet2001
@@ -733,14 +717,12 @@ build.json @home-assistant/supervisor
 /tests/components/homematic/ @pvizeli
 /homeassistant/components/homematicip_cloud/ @hahn-th @lackas
 /tests/components/homematicip_cloud/ @hahn-th @lackas
-/homeassistant/components/homevolt/ @danielhiversen @liudger
-/tests/components/homevolt/ @danielhiversen @liudger
+/homeassistant/components/homevolt/ @danielhiversen
+/tests/components/homevolt/ @danielhiversen
 /homeassistant/components/homewizard/ @DCSBL
 /tests/components/homewizard/ @DCSBL
 /homeassistant/components/honeywell/ @rdfurman @mkmer
 /tests/components/honeywell/ @rdfurman @mkmer
-/homeassistant/components/hr_energy_qube/ @MattieGit
-/tests/components/hr_energy_qube/ @MattieGit
 /homeassistant/components/html5/ @alexyao2015
 /tests/components/html5/ @alexyao2015
 /homeassistant/components/http/ @home-assistant/core
@@ -755,8 +737,6 @@ build.json @home-assistant/supervisor
 /tests/components/huisbaasje/ @dennisschroer
 /homeassistant/components/humidifier/ @home-assistant/core @Shulyaka
 /tests/components/humidifier/ @home-assistant/core @Shulyaka
-/homeassistant/components/humidity/ @home-assistant/core
-/tests/components/humidity/ @home-assistant/core
 /homeassistant/components/hunterdouglas_powerview/ @bdraco @kingy444 @trullock
 /tests/components/hunterdouglas_powerview/ @bdraco @kingy444 @trullock
 /homeassistant/components/husqvarna_automower/ @Thomas55555
@@ -788,8 +768,6 @@ build.json @home-assistant/supervisor
 /tests/components/igloohome/ @keithle888
 /homeassistant/components/ign_sismologia/ @exxamalte
 /tests/components/ign_sismologia/ @exxamalte
-/homeassistant/components/illuminance/ @home-assistant/core
-/tests/components/illuminance/ @home-assistant/core
 /homeassistant/components/image/ @home-assistant/core
 /tests/components/image/ @home-assistant/core
 /homeassistant/components/image_processing/ @home-assistant/core
@@ -808,14 +786,12 @@ build.json @home-assistant/supervisor
 /tests/components/improv_ble/ @emontnemery
 /homeassistant/components/incomfort/ @jbouwh
 /tests/components/incomfort/ @jbouwh
-/homeassistant/components/indevolt/ @xirt
-/tests/components/indevolt/ @xirt
+/homeassistant/components/indevolt/ @xirtnl
+/tests/components/indevolt/ @xirtnl
 /homeassistant/components/inels/ @epdevlab
 /tests/components/inels/ @epdevlab
 /homeassistant/components/influxdb/ @mdegat01 @Robbie1221
 /tests/components/influxdb/ @mdegat01 @Robbie1221
-/homeassistant/components/infrared/ @home-assistant/core
-/tests/components/infrared/ @home-assistant/core
 /homeassistant/components/inkbird/ @bdraco
 /tests/components/inkbird/ @bdraco
 /homeassistant/components/input_boolean/ @home-assistant/core
@@ -949,16 +925,12 @@ build.json @home-assistant/supervisor
 /tests/components/lektrico/ @lektrico
 /homeassistant/components/letpot/ @jpelgrom
 /tests/components/letpot/ @jpelgrom
-/homeassistant/components/lg_infrared/ @home-assistant/core
-/tests/components/lg_infrared/ @home-assistant/core
 /homeassistant/components/lg_netcast/ @Drafteed @splinter98
 /tests/components/lg_netcast/ @Drafteed @splinter98
 /homeassistant/components/lg_thinq/ @LG-ThinQ-Integration
 /tests/components/lg_thinq/ @LG-ThinQ-Integration
 /homeassistant/components/libre_hardware_monitor/ @Sab44
 /tests/components/libre_hardware_monitor/ @Sab44
-/homeassistant/components/lichess/ @aryanhasgithub
-/tests/components/lichess/ @aryanhasgithub
 /homeassistant/components/lidarr/ @tkdrob
 /tests/components/lidarr/ @tkdrob
 /homeassistant/components/liebherr/ @mettolen
@@ -988,8 +960,6 @@ build.json @home-assistant/supervisor
 /tests/components/logbook/ @home-assistant/core
 /homeassistant/components/logger/ @home-assistant/core
 /tests/components/logger/ @home-assistant/core
-/homeassistant/components/lojack/ @devinslick
-/tests/components/lojack/ @devinslick
 /homeassistant/components/london_underground/ @jpbede
 /tests/components/london_underground/ @jpbede
 /homeassistant/components/lookin/ @ANMalko @bdraco
@@ -1079,8 +1049,6 @@ build.json @home-assistant/supervisor
 /tests/components/modern_forms/ @wonderslug
 /homeassistant/components/moehlenhoff_alpha2/ @j-a-n
 /tests/components/moehlenhoff_alpha2/ @j-a-n
-/homeassistant/components/moisture/ @home-assistant/core
-/tests/components/moisture/ @home-assistant/core
 /homeassistant/components/monarch_money/ @jeeftor
 /tests/components/monarch_money/ @jeeftor
 /homeassistant/components/monoprice/ @etsinko @OnFreund
@@ -1091,8 +1059,6 @@ build.json @home-assistant/supervisor
 /tests/components/moon/ @fabaff @frenck
 /homeassistant/components/mopeka/ @bdraco
 /tests/components/mopeka/ @bdraco
-/homeassistant/components/motion/ @home-assistant/core
-/tests/components/motion/ @home-assistant/core
 /homeassistant/components/motion_blinds/ @starkillerOG
 /tests/components/motion_blinds/ @starkillerOG
 /homeassistant/components/motionblinds_ble/ @LennP @jerrybboy
@@ -1206,8 +1172,6 @@ build.json @home-assistant/supervisor
 /tests/components/nzbget/ @chriscla
 /homeassistant/components/obihai/ @dshokouhi @ejpenney
 /tests/components/obihai/ @dshokouhi @ejpenney
-/homeassistant/components/occupancy/ @home-assistant/core
-/tests/components/occupancy/ @home-assistant/core
 /homeassistant/components/octoprint/ @rfleming71
 /tests/components/octoprint/ @rfleming71
 /homeassistant/components/ohmconnect/ @robbiet480
@@ -1234,8 +1198,6 @@ build.json @home-assistant/supervisor
 /tests/components/open_meteo/ @frenck
 /homeassistant/components/open_router/ @joostlek
 /tests/components/open_router/ @joostlek
-/homeassistant/components/opendisplay/ @g4bri3lDev
-/tests/components/opendisplay/ @g4bri3lDev
 /homeassistant/components/openerz/ @misialq
 /tests/components/openerz/ @misialq
 /homeassistant/components/openevse/ @c00w @firstof9
@@ -1319,8 +1281,6 @@ build.json @home-assistant/supervisor
 /tests/components/poolsense/ @haemishkyd
 /homeassistant/components/portainer/ @erwindouna
 /tests/components/portainer/ @erwindouna
-/homeassistant/components/power/ @home-assistant/core
-/tests/components/power/ @home-assistant/core
 /homeassistant/components/powerfox/ @klaasnicolaas
 /tests/components/powerfox/ @klaasnicolaas
 /homeassistant/components/powerfox_local/ @klaasnicolaas
@@ -1343,8 +1303,8 @@ build.json @home-assistant/supervisor
 /tests/components/prosegur/ @dgomes
 /homeassistant/components/proximity/ @mib1185
 /tests/components/proximity/ @mib1185
-/homeassistant/components/proxmoxve/ @Corbeno @erwindouna @CoMPaTech
-/tests/components/proxmoxve/ @Corbeno @erwindouna @CoMPaTech
+/homeassistant/components/proxmoxve/ @jhollowe @Corbeno @erwindouna
+/tests/components/proxmoxve/ @jhollowe @Corbeno @erwindouna
 /homeassistant/components/ps4/ @ktnrg45
 /tests/components/ps4/ @ktnrg45
 /homeassistant/components/pterodactyl/ @elmurato
@@ -1579,8 +1539,8 @@ build.json @home-assistant/supervisor
 /tests/components/sma/ @kellerza @rklomp @erwindouna
 /homeassistant/components/smappee/ @bsmappee
 /tests/components/smappee/ @bsmappee
-/homeassistant/components/smarla/ @explicatis @johannes-exp
-/tests/components/smarla/ @explicatis @johannes-exp
+/homeassistant/components/smarla/ @explicatis @rlint-explicatis
+/tests/components/smarla/ @explicatis @rlint-explicatis
 /homeassistant/components/smart_meter_texas/ @grahamwetzler
 /tests/components/smart_meter_texas/ @grahamwetzler
 /homeassistant/components/smartthings/ @joostlek
@@ -1606,8 +1566,6 @@ build.json @home-assistant/supervisor
 /homeassistant/components/solaredge_local/ @drobtravels @scheric
 /homeassistant/components/solarlog/ @Ernst79 @dontinelli
 /tests/components/solarlog/ @Ernst79 @dontinelli
-/homeassistant/components/solarman/ @solarmanpv
-/tests/components/solarman/ @solarmanpv
 /homeassistant/components/solax/ @squishykid @Darsstar
 /tests/components/solax/ @squishykid @Darsstar
 /homeassistant/components/soma/ @ratsept
@@ -1636,6 +1594,8 @@ build.json @home-assistant/supervisor
 /tests/components/srp_energy/ @briglx
 /homeassistant/components/starline/ @anonym-tsk
 /tests/components/starline/ @anonym-tsk
+/homeassistant/components/starlink/ @boswelja
+/tests/components/starlink/ @boswelja
 /homeassistant/components/statistics/ @ThomDietrich @gjohansson-ST
 /tests/components/statistics/ @ThomDietrich @gjohansson-ST
 /homeassistant/components/steam_online/ @tkdrob
@@ -1688,8 +1648,8 @@ build.json @home-assistant/supervisor
 /tests/components/system_bridge/ @timmo001
 /homeassistant/components/systemmonitor/ @gjohansson-ST
 /tests/components/systemmonitor/ @gjohansson-ST
-/homeassistant/components/systemnexa2/ @konsulten
-/tests/components/systemnexa2/ @konsulten
+/homeassistant/components/systemnexa2/ @konsulten @slangstrom
+/tests/components/systemnexa2/ @konsulten @slangstrom
 /homeassistant/components/tado/ @erwindouna
 /tests/components/tado/ @erwindouna
 /homeassistant/components/tag/ @home-assistant/core
@@ -1717,8 +1677,6 @@ build.json @home-assistant/supervisor
 /tests/components/tellduslive/ @fredrike
 /homeassistant/components/teltonika/ @karlbeecken
 /tests/components/teltonika/ @karlbeecken
-/homeassistant/components/temperature/ @home-assistant/core
-/tests/components/temperature/ @home-assistant/core
 /homeassistant/components/template/ @Petro31 @home-assistant/core
 /tests/components/template/ @Petro31 @home-assistant/core
 /homeassistant/components/tesla_fleet/ @Bre77
@@ -1731,6 +1689,7 @@ build.json @home-assistant/supervisor
 /tests/components/tessie/ @Bre77
 /homeassistant/components/text/ @home-assistant/core
 /tests/components/text/ @home-assistant/core
+/homeassistant/components/tfiac/ @fredrike @mellado
 /homeassistant/components/thermobeacon/ @bdraco
 /tests/components/thermobeacon/ @bdraco
 /homeassistant/components/thermopro/ @bdraco @h3ss
@@ -1764,8 +1723,6 @@ build.json @home-assistant/supervisor
 /tests/components/tomorrowio/ @raman325 @lymanepp
 /homeassistant/components/totalconnect/ @austinmroczek
 /tests/components/totalconnect/ @austinmroczek
-/homeassistant/components/touchline/ @mnordseth
-/tests/components/touchline/ @mnordseth
 /homeassistant/components/touchline_sl/ @jnsgruk
 /tests/components/touchline_sl/ @jnsgruk
 /homeassistant/components/tplink/ @rytilahti @bdraco @sdb9696
@@ -1794,8 +1751,6 @@ build.json @home-assistant/supervisor
 /tests/components/trend/ @jpbede
 /homeassistant/components/triggercmd/ @rvmey
 /tests/components/triggercmd/ @rvmey
-/homeassistant/components/trmnl/ @joostlek
-/tests/components/trmnl/ @joostlek
 /homeassistant/components/tts/ @home-assistant/core
 /tests/components/tts/ @home-assistant/core
 /homeassistant/components/tuya/ @Tuya @zlinoliver
@@ -1812,8 +1767,6 @@ build.json @home-assistant/supervisor
 /tests/components/ukraine_alarm/ @PaulAnnekov
 /homeassistant/components/unifi/ @Kane610
 /tests/components/unifi/ @Kane610
-/homeassistant/components/unifi_access/ @imhotep @RaHehl
-/tests/components/unifi_access/ @imhotep @RaHehl
 /homeassistant/components/unifi_direct/ @tofuSCHNITZEL
 /homeassistant/components/unifiled/ @florisvdk
 /homeassistant/components/unifiprotect/ @RaHehl
@@ -1853,8 +1806,8 @@ build.json @home-assistant/supervisor
 /tests/components/vegehub/ @thulrus
 /homeassistant/components/velbus/ @Cereal2nd @brefra
 /tests/components/velbus/ @Cereal2nd @brefra
-/homeassistant/components/velux/ @Julius2342 @pawlizio @wollew
-/tests/components/velux/ @Julius2342 @pawlizio @wollew
+/homeassistant/components/velux/ @Julius2342 @DeerMaximum @pawlizio @wollew
+/tests/components/velux/ @Julius2342 @DeerMaximum @pawlizio @wollew
 /homeassistant/components/venstar/ @garbled1 @jhollowe
 /tests/components/venstar/ @garbled1 @jhollowe
 /homeassistant/components/versasense/ @imstevenxyz
@@ -1937,19 +1890,15 @@ build.json @home-assistant/supervisor
 /tests/components/whois/ @frenck
 /homeassistant/components/wiffi/ @mampfes
 /tests/components/wiffi/ @mampfes
-/homeassistant/components/wiim/ @Linkplay2020
-/tests/components/wiim/ @Linkplay2020
 /homeassistant/components/wilight/ @leofig-rj
 /tests/components/wilight/ @leofig-rj
-/homeassistant/components/window/ @home-assistant/core
-/tests/components/window/ @home-assistant/core
 /homeassistant/components/wirelesstag/ @sergeymaysak
 /homeassistant/components/withings/ @joostlek
 /tests/components/withings/ @joostlek
 /homeassistant/components/wiz/ @sbidy @arturpragacz
 /tests/components/wiz/ @sbidy @arturpragacz
-/homeassistant/components/wled/ @frenck @mik-laj
-/tests/components/wled/ @frenck @mik-laj
+/homeassistant/components/wled/ @frenck
+/tests/components/wled/ @frenck
 /homeassistant/components/wmspro/ @mback2k
 /tests/components/wmspro/ @mback2k
 /homeassistant/components/wolflink/ @adamkrol93 @mtielen
@@ -2017,7 +1966,6 @@ build.json @home-assistant/supervisor
 /homeassistant/components/zone/ @home-assistant/core
 /tests/components/zone/ @home-assistant/core
 /homeassistant/components/zoneminder/ @rohankapoorcom @nabbi
-/tests/components/zoneminder/ @rohankapoorcom @nabbi
 /homeassistant/components/zwave_js/ @home-assistant/z-wave
 /tests/components/zwave_js/ @home-assistant/z-wave
 /homeassistant/components/zwave_me/ @lawfulchaos @Z-Wave-Me @PoltoS

Dockerfile

@@ -10,6 +10,7 @@ LABEL \
     org.opencontainers.image.description="Open-source home automation platform running on Python 3" \
     org.opencontainers.image.documentation="https://www.home-assistant.io/docs/" \
     org.opencontainers.image.licenses="Apache-2.0" \
+    org.opencontainers.image.source="https://github.com/home-assistant/core" \
     org.opencontainers.image.title="Home Assistant" \
     org.opencontainers.image.url="https://www.home-assistant.io/"
 
@@ -29,7 +30,7 @@ RUN \
     # Verify go2rtc can be executed
     go2rtc --version \
     # Install uv
-    && pip3 install uv==0.11.1
+    && pip3 install uv==0.9.26
 
 WORKDIR /usr/src
 

codecov.yml

@@ -10,7 +10,6 @@ coverage:
         target: auto
         threshold: 1
         paths:
-          - homeassistant/components/*/backup.py
           - homeassistant/components/*/config_flow.py
           - homeassistant/components/*/device_action.py
           - homeassistant/components/*/device_condition.py
@@ -29,7 +28,6 @@ coverage:
         target: 100
         threshold: 0
         paths:
-          - homeassistant/components/*/backup.py
           - homeassistant/components/*/config_flow.py
           - homeassistant/components/*/device_action.py
           - homeassistant/components/*/device_condition.py

homeassistant/bootstrap.py

@@ -70,7 +70,7 @@ from .const import (
     SIGNAL_BOOTSTRAP_INTEGRATIONS,
 )
 from .core_config import async_process_ha_core_config
-from .exceptions import HomeAssistantError, UnsupportedStorageVersionError
+from .exceptions import HomeAssistantError
 from .helpers import (
     area_registry,
     category_registry,
@@ -210,7 +210,6 @@ DEFAULT_INTEGRATIONS = {
     "analytics",  # Needed for onboarding
     "application_credentials",
     "backup",
-    "brands",
     "frontend",
     "hardware",
     "labs",
@@ -236,29 +235,9 @@ DEFAULT_INTEGRATIONS = {
     "input_text",
     "schedule",
     "timer",
-    #
-    # Base platforms:
-    *BASE_PLATFORMS,
-    #
-    # Integrations providing triggers and conditions for base platforms:
-    "air_quality",
-    "battery",
-    "door",
-    "garage_door",
-    "gate",
-    "humidity",
-    "illuminance",
-    "moisture",
-    "motion",
-    "occupancy",
-    "power",
-    "temperature",
-    "window",
 }
 DEFAULT_INTEGRATIONS_RECOVERY_MODE = {
     # These integrations are set up if recovery mode is activated.
-    "backup",
-    "cloud",
     "frontend",
 }
 DEFAULT_INTEGRATIONS_SUPERVISOR = {
@@ -453,56 +432,32 @@ def _init_blocking_io_modules_in_executor() -> None:
     is_docker_env()
 
 
-async def async_load_base_functionality(hass: core.HomeAssistant) -> bool:
-    """Load the registries and modules that will do blocking I/O.
-
-    Return whether loading succeeded.
-    """
+async def async_load_base_functionality(hass: core.HomeAssistant) -> None:
+    """Load the registries and modules that will do blocking I/O."""
     if DATA_REGISTRIES_LOADED in hass.data:
-        return True
-
+        return
     hass.data[DATA_REGISTRIES_LOADED] = None
     entity.async_setup(hass)
     frame.async_setup(hass)
     template.async_setup(hass)
     translation.async_setup(hass)
-
-    recovery = hass.config.recovery_mode
-    try:
-        await asyncio.gather(
-            create_eager_task(get_internal_store_manager(hass).async_initialize()),
-            create_eager_task(area_registry.async_load(hass, load_empty=recovery)),
-            create_eager_task(category_registry.async_load(hass, load_empty=recovery)),
-            create_eager_task(device_registry.async_load(hass, load_empty=recovery)),
-            create_eager_task(entity_registry.async_load(hass, load_empty=recovery)),
-            create_eager_task(floor_registry.async_load(hass, load_empty=recovery)),
-            create_eager_task(issue_registry.async_load(hass, load_empty=recovery)),
-            create_eager_task(label_registry.async_load(hass, load_empty=recovery)),
-            hass.async_add_executor_job(_init_blocking_io_modules_in_executor),
-            create_eager_task(template.async_load_custom_templates(hass)),
-            create_eager_task(restore_state.async_load(hass, load_empty=recovery)),
-            create_eager_task(hass.config_entries.async_initialize()),
-            create_eager_task(async_get_system_info(hass)),
-            create_eager_task(condition.async_setup(hass)),
-            create_eager_task(trigger.async_setup(hass)),
-        )
-    except UnsupportedStorageVersionError as err:
-        # If we're already in recovery mode, we don't want to handle the exception
-        # and activate recovery mode again, as that would lead to an infinite loop.
-        if recovery:
-            raise
-
-        _LOGGER.error(
-            "Storage file %s was created by a newer version of Home Assistant"
-            " (storage version %s > %s); activating recovery mode; on-disk data"
-            " is preserved; upgrade Home Assistant or restore from a backup",
-            err.storage_key,
-            err.found_version,
-            err.max_supported_version,
-        )
-        return False
-
-    return True
+    await asyncio.gather(
+        create_eager_task(get_internal_store_manager(hass).async_initialize()),
+        create_eager_task(area_registry.async_load(hass)),
+        create_eager_task(category_registry.async_load(hass)),
+        create_eager_task(device_registry.async_load(hass)),
+        create_eager_task(entity_registry.async_load(hass)),
+        create_eager_task(floor_registry.async_load(hass)),
+        create_eager_task(issue_registry.async_load(hass)),
+        create_eager_task(label_registry.async_load(hass)),
+        hass.async_add_executor_job(_init_blocking_io_modules_in_executor),
+        create_eager_task(template.async_load_custom_templates(hass)),
+        create_eager_task(restore_state.async_load(hass)),
+        create_eager_task(hass.config_entries.async_initialize()),
+        create_eager_task(async_get_system_info(hass)),
+        create_eager_task(condition.async_setup(hass)),
+        create_eager_task(trigger.async_setup(hass)),
+    )
 
 
 async def async_from_config_dict(
@@ -519,9 +474,7 @@ async def async_from_config_dict(
     # Prime custom component cache early so we know if registry entries are tied
     # to a custom integration
     await loader.async_get_custom_components(hass)
-
-    if not await async_load_base_functionality(hass):
-        return None
+    await async_load_base_functionality(hass)
 
     # Set up core.
     _LOGGER.debug("Setting up %s", CORE_INTEGRATIONS)

homeassistant/brands/lg.json

@@ -1,11 +1,5 @@
 {
   "domain": "lg",
   "name": "LG",
-  "integrations": [
-    "lg_infrared",
-    "lg_netcast",
-    "lg_soundbar",
-    "lg_thinq",
-    "webostv"
-  ]
+  "integrations": ["lg_netcast", "lg_soundbar", "lg_thinq", "webostv"]
 }

homeassistant/brands/ubiquiti.json

@@ -1,12 +1,5 @@
 {
   "domain": "ubiquiti",
   "name": "Ubiquiti",
-  "integrations": [
-    "airos",
-    "unifi",
-    "unifi_access",
-    "unifi_direct",
-    "unifiled",
-    "unifiprotect"
-  ]
+  "integrations": ["airos", "unifi", "unifi_direct", "unifiled", "unifiprotect"]
 }

homeassistant/brands/ubisys.json

@@ -1,5 +0,0 @@
-{
-  "domain": "ubisys",
-  "name": "Ubisys",
-  "iot_standards": ["zigbee"]
-}

homeassistant/components/abode/manifest.json

@@ -9,6 +9,6 @@
   },
   "iot_class": "cloud_push",
   "loggers": ["jaraco.abode", "lomond"],
-  "requirements": ["jaraco.abode==6.4.0"],
+  "requirements": ["jaraco.abode==6.2.1"],
   "single_config_entry": true
 }

homeassistant/components/abode/services.py

@@ -12,6 +12,10 @@ from homeassistant.helpers.dispatcher import dispatcher_send
 
 from .const import DOMAIN, DOMAIN_DATA, LOGGER
 
+SERVICE_SETTINGS = "change_setting"
+SERVICE_CAPTURE_IMAGE = "capture_image"
+SERVICE_TRIGGER_AUTOMATION = "trigger_automation"
+
 ATTR_SETTING = "setting"
 ATTR_VALUE = "value"
 
@@ -71,13 +75,16 @@ def async_setup_services(hass: HomeAssistant) -> None:
     """Home Assistant services."""
 
     hass.services.async_register(
-        DOMAIN, "change_setting", _change_setting, schema=CHANGE_SETTING_SCHEMA
+        DOMAIN, SERVICE_SETTINGS, _change_setting, schema=CHANGE_SETTING_SCHEMA
     )
 
     hass.services.async_register(
-        DOMAIN, "capture_image", _capture_image, schema=CAPTURE_IMAGE_SCHEMA
+        DOMAIN, SERVICE_CAPTURE_IMAGE, _capture_image, schema=CAPTURE_IMAGE_SCHEMA
     )
 
     hass.services.async_register(
-        DOMAIN, "trigger_automation", _trigger_automation, schema=AUTOMATION_SCHEMA
+        DOMAIN,
+        SERVICE_TRIGGER_AUTOMATION,
+        _trigger_automation,
+        schema=AUTOMATION_SCHEMA,
     )

homeassistant/components/accuweather/manifest.json

@@ -7,5 +7,5 @@
   "integration_type": "service",
   "iot_class": "cloud_polling",
   "loggers": ["accuweather"],
-  "requirements": ["accuweather==5.1.0"]
+  "requirements": ["accuweather==5.0.0"]
 }

homeassistant/components/accuweather/system_health.py

@@ -30,8 +30,6 @@ async def system_health_info(hass: HomeAssistant) -> dict[str, Any]:
     )
 
     return {
-        "can_reach_server": system_health.async_check_can_reach_url(
-            hass, str(ENDPOINT)
-        ),
+        "can_reach_server": system_health.async_check_can_reach_url(hass, ENDPOINT),
         "remaining_requests": remaining_requests,
     }

homeassistant/components/accuweather/weather.py

@@ -191,7 +191,7 @@ class AccuWeatherEntity(
             {
                 ATTR_FORECAST_TIME: utc_from_timestamp(item["EpochDate"]).isoformat(),
                 ATTR_FORECAST_CLOUD_COVERAGE: item["CloudCoverDay"],
-                ATTR_FORECAST_HUMIDITY: item["RelativeHumidityDay"].get("Average"),
+                ATTR_FORECAST_HUMIDITY: item["RelativeHumidityDay"]["Average"],
                 ATTR_FORECAST_NATIVE_TEMP: item["TemperatureMax"][ATTR_VALUE],
                 ATTR_FORECAST_NATIVE_TEMP_LOW: item["TemperatureMin"][ATTR_VALUE],
                 ATTR_FORECAST_NATIVE_APPARENT_TEMP: item["RealFeelTemperatureMax"][

homeassistant/components/actron_air/config_flow.py

@@ -120,7 +120,7 @@ class ActronAirConfigFlow(ConfigFlow, domain=DOMAIN):
             return self.async_show_form(
                 step_id="timeout",
             )
-        self.login_task = None
+        del self.login_task
         return await self.async_step_user()
 
     async def async_step_reauth(

homeassistant/components/actron_air/manifest.json

@@ -12,6 +12,6 @@
   "documentation": "https://www.home-assistant.io/integrations/actron_air",
   "integration_type": "hub",
   "iot_class": "cloud_polling",
-  "quality_scale": "silver",
+  "quality_scale": "bronze",
   "requirements": ["actron-neo-api==0.4.1"]
 }

homeassistant/components/actron_air/quality_scale.yaml

@@ -37,7 +37,7 @@ rules:
   log-when-unavailable: done
   parallel-updates: done
   reauthentication-flow: done
-  test-coverage: done
+  test-coverage: todo
 
   # Gold
   devices: done

homeassistant/components/adax/climate.py

@@ -168,57 +168,29 @@ class LocalAdaxDevice(CoordinatorEntity[AdaxLocalCoordinator], ClimateEntity):
         if hvac_mode == HVACMode.HEAT:
             temperature = self._attr_target_temperature or self._attr_min_temp
             await self._adax_data_handler.set_target_temperature(temperature)
-            self._attr_target_temperature = temperature
-            self._attr_icon = "mdi:radiator"
         elif hvac_mode == HVACMode.OFF:
             await self._adax_data_handler.set_target_temperature(0)
-            self._attr_icon = "mdi:radiator-off"
-        else:
-            # Ignore unsupported HVAC modes to avoid desynchronizing entity state
-            # from the physical device.
-            return
-
-        self._attr_hvac_mode = hvac_mode
-        self.async_write_ha_state()
 
     async def async_set_temperature(self, **kwargs: Any) -> None:
         """Set new target temperature."""
         if (temperature := kwargs.get(ATTR_TEMPERATURE)) is None:
             return
-        if self._attr_hvac_mode == HVACMode.HEAT:
-            await self._adax_data_handler.set_target_temperature(temperature)
+        await self._adax_data_handler.set_target_temperature(temperature)
 
-        self._attr_target_temperature = temperature
-        self.async_write_ha_state()
-
-    def _update_hvac_attributes(self) -> None:
-        """Update hvac mode and temperatures from coordinator data.
-
-        The coordinator reports a target temperature of 0 when the heater is
-        turned off. In that case, only the hvac mode and icon are updated and
-        the previous non-zero target temperature is preserved. When the
-        reported target temperature is non-zero, the stored target temperature
-        is updated to match the coordinator value.
-        """
+    @callback
+    def _handle_coordinator_update(self) -> None:
+        """Handle updated data from the coordinator."""
         if data := self.coordinator.data:
             self._attr_current_temperature = data["current_temperature"]
+            self._attr_available = self._attr_current_temperature is not None
             if (target_temp := data["target_temperature"]) == 0:
                 self._attr_hvac_mode = HVACMode.OFF
                 self._attr_icon = "mdi:radiator-off"
-                if self._attr_target_temperature is None:
+                if target_temp == 0:
                     self._attr_target_temperature = self._attr_min_temp
             else:
                 self._attr_hvac_mode = HVACMode.HEAT
                 self._attr_icon = "mdi:radiator"
                 self._attr_target_temperature = target_temp
 
-    @callback
-    def _handle_coordinator_update(self) -> None:
-        """Handle updated data from the coordinator."""
-        self._update_hvac_attributes()
         super()._handle_coordinator_update()
-
-    async def async_added_to_hass(self) -> None:
-        """When entity is added to hass."""
-        await super().async_added_to_hass()
-        self._update_hvac_attributes()

homeassistant/components/advantage_air/services.py

@@ -10,6 +10,8 @@ from homeassistant.helpers import config_validation as cv, service
 
 from .const import DOMAIN
 
+ADVANTAGE_AIR_SERVICE_SET_TIME_TO = "set_time_to"
+
 
 @callback
 def async_setup_services(hass: HomeAssistant) -> None:
@@ -18,7 +20,7 @@ def async_setup_services(hass: HomeAssistant) -> None:
     service.async_register_platform_entity_service(
         hass,
         DOMAIN,
-        "set_time_to",
+        ADVANTAGE_AIR_SERVICE_SET_TIME_TO,
         entity_domain=SENSOR_DOMAIN,
         schema={vol.Required("minutes"): cv.positive_int},
         func="set_time_to",

homeassistant/components/agent_dvr/services.py

@@ -8,12 +8,18 @@ from homeassistant.helpers import service
 
 from .const import DOMAIN
 
+_DEV_EN_ALT = "enable_alerts"
+_DEV_DS_ALT = "disable_alerts"
+_DEV_EN_REC = "start_recording"
+_DEV_DS_REC = "stop_recording"
+_DEV_SNAP = "snapshot"
+
 CAMERA_SERVICES = {
-    "enable_alerts": "async_enable_alerts",
-    "disable_alerts": "async_disable_alerts",
-    "start_recording": "async_start_recording",
-    "stop_recording": "async_stop_recording",
-    "snapshot": "async_snapshot",
+    _DEV_EN_ALT: "async_enable_alerts",
+    _DEV_DS_ALT: "async_disable_alerts",
+    _DEV_EN_REC: "async_start_recording",
+    _DEV_DS_REC: "async_stop_recording",
+    _DEV_SNAP: "async_snapshot",
 }
 
 

homeassistant/components/air_quality/condition.py

@@ -1,150 +0,0 @@
-"""Provides conditions for air quality."""
-
-from homeassistant.components.binary_sensor import (
-    DOMAIN as BINARY_SENSOR_DOMAIN,
-    BinarySensorDeviceClass,
-)
-from homeassistant.components.sensor import DOMAIN as SENSOR_DOMAIN, SensorDeviceClass
-from homeassistant.const import (
-    CONCENTRATION_MICROGRAMS_PER_CUBIC_METER,
-    CONCENTRATION_PARTS_PER_BILLION,
-    CONCENTRATION_PARTS_PER_MILLION,
-    STATE_OFF,
-    STATE_ON,
-)
-from homeassistant.core import HomeAssistant
-from homeassistant.helpers.automation import DomainSpec, NumericalDomainSpec
-from homeassistant.helpers.condition import (
-    Condition,
-    make_entity_numerical_condition,
-    make_entity_numerical_condition_with_unit,
-    make_entity_state_condition,
-)
-from homeassistant.util.unit_conversion import (
-    CarbonMonoxideConcentrationConverter,
-    MassVolumeConcentrationConverter,
-    NitrogenDioxideConcentrationConverter,
-    NitrogenMonoxideConcentrationConverter,
-    OzoneConcentrationConverter,
-    SulphurDioxideConcentrationConverter,
-    UnitlessRatioConverter,
-)
-
-
-def _make_detected_condition(
-    device_class: BinarySensorDeviceClass,
-) -> type[Condition]:
-    """Create a detected condition for a binary sensor device class."""
-    return make_entity_state_condition(
-        {BINARY_SENSOR_DOMAIN: DomainSpec(device_class=device_class)}, STATE_ON
-    )
-
-
-def _make_cleared_condition(
-    device_class: BinarySensorDeviceClass,
-) -> type[Condition]:
-    """Create a cleared condition for a binary sensor device class."""
-    return make_entity_state_condition(
-        {BINARY_SENSOR_DOMAIN: DomainSpec(device_class=device_class)}, STATE_OFF
-    )
-
-
-CONDITIONS: dict[str, type[Condition]] = {
-    # Binary sensor conditions (detected/cleared)
-    "is_gas_detected": _make_detected_condition(BinarySensorDeviceClass.GAS),
-    "is_gas_cleared": _make_cleared_condition(BinarySensorDeviceClass.GAS),
-    "is_co_detected": _make_detected_condition(BinarySensorDeviceClass.CO),
-    "is_co_cleared": _make_cleared_condition(BinarySensorDeviceClass.CO),
-    "is_smoke_detected": _make_detected_condition(BinarySensorDeviceClass.SMOKE),
-    "is_smoke_cleared": _make_cleared_condition(BinarySensorDeviceClass.SMOKE),
-    # Numerical sensor conditions with unit conversion
-    "is_co_value": make_entity_numerical_condition_with_unit(
-        {SENSOR_DOMAIN: NumericalDomainSpec(device_class=SensorDeviceClass.CO)},
-        CONCENTRATION_MICROGRAMS_PER_CUBIC_METER,
-        CarbonMonoxideConcentrationConverter,
-    ),
-    "is_ozone_value": make_entity_numerical_condition_with_unit(
-        {SENSOR_DOMAIN: NumericalDomainSpec(device_class=SensorDeviceClass.OZONE)},
-        CONCENTRATION_MICROGRAMS_PER_CUBIC_METER,
-        OzoneConcentrationConverter,
-    ),
-    "is_voc_value": make_entity_numerical_condition_with_unit(
-        {
-            SENSOR_DOMAIN: NumericalDomainSpec(
-                device_class=SensorDeviceClass.VOLATILE_ORGANIC_COMPOUNDS
-            )
-        },
-        CONCENTRATION_MICROGRAMS_PER_CUBIC_METER,
-        MassVolumeConcentrationConverter,
-    ),
-    "is_voc_ratio_value": make_entity_numerical_condition_with_unit(
-        {
-            SENSOR_DOMAIN: NumericalDomainSpec(
-                device_class=SensorDeviceClass.VOLATILE_ORGANIC_COMPOUNDS_PARTS
-            )
-        },
-        CONCENTRATION_PARTS_PER_BILLION,
-        UnitlessRatioConverter,
-    ),
-    "is_no_value": make_entity_numerical_condition_with_unit(
-        {
-            SENSOR_DOMAIN: NumericalDomainSpec(
-                device_class=SensorDeviceClass.NITROGEN_MONOXIDE
-            )
-        },
-        CONCENTRATION_MICROGRAMS_PER_CUBIC_METER,
-        NitrogenMonoxideConcentrationConverter,
-    ),
-    "is_no2_value": make_entity_numerical_condition_with_unit(
-        {
-            SENSOR_DOMAIN: NumericalDomainSpec(
-                device_class=SensorDeviceClass.NITROGEN_DIOXIDE
-            )
-        },
-        CONCENTRATION_MICROGRAMS_PER_CUBIC_METER,
-        NitrogenDioxideConcentrationConverter,
-    ),
-    "is_so2_value": make_entity_numerical_condition_with_unit(
-        {
-            SENSOR_DOMAIN: NumericalDomainSpec(
-                device_class=SensorDeviceClass.SULPHUR_DIOXIDE
-            )
-        },
-        CONCENTRATION_MICROGRAMS_PER_CUBIC_METER,
-        SulphurDioxideConcentrationConverter,
-    ),
-    # Numerical sensor conditions without unit conversion (single-unit device classes)
-    "is_co2_value": make_entity_numerical_condition(
-        {SENSOR_DOMAIN: NumericalDomainSpec(device_class=SensorDeviceClass.CO2)},
-        valid_unit=CONCENTRATION_PARTS_PER_MILLION,
-    ),
-    "is_pm1_value": make_entity_numerical_condition(
-        {SENSOR_DOMAIN: NumericalDomainSpec(device_class=SensorDeviceClass.PM1)},
-        valid_unit=CONCENTRATION_MICROGRAMS_PER_CUBIC_METER,
-    ),
-    "is_pm25_value": make_entity_numerical_condition(
-        {SENSOR_DOMAIN: NumericalDomainSpec(device_class=SensorDeviceClass.PM25)},
-        valid_unit=CONCENTRATION_MICROGRAMS_PER_CUBIC_METER,
-    ),
-    "is_pm4_value": make_entity_numerical_condition(
-        {SENSOR_DOMAIN: NumericalDomainSpec(device_class=SensorDeviceClass.PM4)},
-        valid_unit=CONCENTRATION_MICROGRAMS_PER_CUBIC_METER,
-    ),
-    "is_pm10_value": make_entity_numerical_condition(
-        {SENSOR_DOMAIN: NumericalDomainSpec(device_class=SensorDeviceClass.PM10)},
-        valid_unit=CONCENTRATION_MICROGRAMS_PER_CUBIC_METER,
-    ),
-    "is_n2o_value": make_entity_numerical_condition(
-        {
-            SENSOR_DOMAIN: NumericalDomainSpec(
-                device_class=SensorDeviceClass.NITROUS_OXIDE
-            )
-        },
-        valid_unit=CONCENTRATION_MICROGRAMS_PER_CUBIC_METER,
-    ),
-}
-
-
-async def async_get_conditions(hass: HomeAssistant) -> dict[str, type[Condition]]:
-    """Return the air quality conditions."""
-    return CONDITIONS

homeassistant/components/air_quality/conditions.yaml

@@ -1,588 +0,0 @@
-# --- Common condition fields ---
-
-.condition_behavior: &condition_behavior
-  required: true
-  default: any
-  selector:
-    select:
-      translation_key: condition_behavior
-      options:
-        - all
-        - any
-
-# --- Number or entity selectors ---
-
-.number_or_entity_co: &number_or_entity_co
-  required: false
-  selector:
-    choose:
-      choices:
-        number:
-          selector:
-            number:
-              mode: box
-        entity:
-          selector:
-            entity:
-              filter:
-                - domain: input_number
-                  unit_of_measurement:
-                    - "ppb"
-                    - "ppm"
-                    - "mg/m³"
-                    - "μg/m³"
-                - domain: sensor
-                  device_class: carbon_monoxide
-                - domain: number
-                  device_class: carbon_monoxide
-      translation_key: number_or_entity
-
-.number_or_entity_co2: &number_or_entity_co2
-  required: false
-  selector:
-    choose:
-      choices:
-        number:
-          selector:
-            number:
-              mode: box
-              unit_of_measurement: "ppm"
-        entity:
-          selector:
-            entity:
-              filter:
-                - domain: input_number
-                  unit_of_measurement: "ppm"
-                - domain: sensor
-                  device_class: carbon_dioxide
-                - domain: number
-                  device_class: carbon_dioxide
-      translation_key: number_or_entity
-
-.number_or_entity_pm1: &number_or_entity_pm1
-  required: false
-  selector:
-    choose:
-      choices:
-        number:
-          selector:
-            number:
-              mode: box
-              unit_of_measurement: "μg/m³"
-        entity:
-          selector:
-            entity:
-              filter:
-                - domain: input_number
-                  unit_of_measurement: "μg/m³"
-                - domain: sensor
-                  device_class: pm1
-                - domain: number
-                  device_class: pm1
-      translation_key: number_or_entity
-
-.number_or_entity_pm25: &number_or_entity_pm25
-  required: false
-  selector:
-    choose:
-      choices:
-        number:
-          selector:
-            number:
-              mode: box
-              unit_of_measurement: "μg/m³"
-        entity:
-          selector:
-            entity:
-              filter:
-                - domain: input_number
-                  unit_of_measurement: "μg/m³"
-                - domain: sensor
-                  device_class: pm25
-                - domain: number
-                  device_class: pm25
-      translation_key: number_or_entity
-
-.number_or_entity_pm4: &number_or_entity_pm4
-  required: false
-  selector:
-    choose:
-      choices:
-        number:
-          selector:
-            number:
-              mode: box
-              unit_of_measurement: "μg/m³"
-        entity:
-          selector:
-            entity:
-              filter:
-                - domain: input_number
-                  unit_of_measurement: "μg/m³"
-                - domain: sensor
-                  device_class: pm4
-                - domain: number
-                  device_class: pm4
-      translation_key: number_or_entity
-
-.number_or_entity_pm10: &number_or_entity_pm10
-  required: false
-  selector:
-    choose:
-      choices:
-        number:
-          selector:
-            number:
-              mode: box
-              unit_of_measurement: "μg/m³"
-        entity:
-          selector:
-            entity:
-              filter:
-                - domain: input_number
-                  unit_of_measurement: "μg/m³"
-                - domain: sensor
-                  device_class: pm10
-                - domain: number
-                  device_class: pm10
-      translation_key: number_or_entity
-
-.number_or_entity_ozone: &number_or_entity_ozone
-  required: false
-  selector:
-    choose:
-      choices:
-        number:
-          selector:
-            number:
-              mode: box
-        entity:
-          selector:
-            entity:
-              filter:
-                - domain: input_number
-                  unit_of_measurement:
-                    - "ppb"
-                    - "ppm"
-                    - "μg/m³"
-                - domain: sensor
-                  device_class: ozone
-                - domain: number
-                  device_class: ozone
-      translation_key: number_or_entity
-
-.number_or_entity_voc: &number_or_entity_voc
-  required: false
-  selector:
-    choose:
-      choices:
-        number:
-          selector:
-            number:
-              mode: box
-        entity:
-          selector:
-            entity:
-              filter:
-                - domain: input_number
-                  unit_of_measurement:
-                    - "μg/m³"
-                    - "mg/m³"
-                - domain: sensor
-                  device_class: volatile_organic_compounds
-                - domain: number
-                  device_class: volatile_organic_compounds
-      translation_key: number_or_entity
-
-.number_or_entity_voc_ratio: &number_or_entity_voc_ratio
-  required: false
-  selector:
-    choose:
-      choices:
-        number:
-          selector:
-            number:
-              mode: box
-        entity:
-          selector:
-            entity:
-              filter:
-                - domain: input_number
-                  unit_of_measurement:
-                    - "ppb"
-                    - "ppm"
-                - domain: sensor
-                  device_class: volatile_organic_compounds_parts
-                - domain: number
-                  device_class: volatile_organic_compounds_parts
-      translation_key: number_or_entity
-
-.number_or_entity_no: &number_or_entity_no
-  required: false
-  selector:
-    choose:
-      choices:
-        number:
-          selector:
-            number:
-              mode: box
-        entity:
-          selector:
-            entity:
-              filter:
-                - domain: input_number
-                  unit_of_measurement:
-                    - "ppb"
-                    - "μg/m³"
-                - domain: sensor
-                  device_class: nitrogen_monoxide
-                - domain: number
-                  device_class: nitrogen_monoxide
-      translation_key: number_or_entity
-
-.number_or_entity_no2: &number_or_entity_no2
-  required: false
-  selector:
-    choose:
-      choices:
-        number:
-          selector:
-            number:
-              mode: box
-        entity:
-          selector:
-            entity:
-              filter:
-                - domain: input_number
-                  unit_of_measurement:
-                    - "ppb"
-                    - "ppm"
-                    - "μg/m³"
-                - domain: sensor
-                  device_class: nitrogen_dioxide
-                - domain: number
-                  device_class: nitrogen_dioxide
-      translation_key: number_or_entity
-
-.number_or_entity_n2o: &number_or_entity_n2o
-  required: false
-  selector:
-    choose:
-      choices:
-        number:
-          selector:
-            number:
-              mode: box
-              unit_of_measurement: "μg/m³"
-        entity:
-          selector:
-            entity:
-              filter:
-                - domain: input_number
-                  unit_of_measurement: "μg/m³"
-                - domain: sensor
-                  device_class: nitrous_oxide
-                - domain: number
-                  device_class: nitrous_oxide
-      translation_key: number_or_entity
-
-.number_or_entity_so2: &number_or_entity_so2
-  required: false
-  selector:
-    choose:
-      choices:
-        number:
-          selector:
-            number:
-              mode: box
-        entity:
-          selector:
-            entity:
-              filter:
-                - domain: input_number
-                  unit_of_measurement:
-                    - "ppb"
-                    - "μg/m³"
-                - domain: sensor
-                  device_class: sulphur_dioxide
-                - domain: number
-                  device_class: sulphur_dioxide
-      translation_key: number_or_entity
-
-# --- Unit selectors ---
-
-.unit_co: &unit_co
-  required: false
-  selector:
-    select:
-      options:
-        - "ppb"
-        - "ppm"
-        - "mg/m³"
-        - "μg/m³"
-
-.unit_ozone: &unit_ozone
-  required: false
-  selector:
-    select:
-      options:
-        - "ppb"
-        - "ppm"
-        - "μg/m³"
-
-.unit_no2: &unit_no2
-  required: false
-  selector:
-    select:
-      options:
-        - "ppb"
-        - "ppm"
-        - "μg/m³"
-
-.unit_no: &unit_no
-  required: false
-  selector:
-    select:
-      options:
-        - "ppb"
-        - "μg/m³"
-
-.unit_so2: &unit_so2
-  required: false
-  selector:
-    select:
-      options:
-        - "ppb"
-        - "μg/m³"
-
-.unit_voc: &unit_voc
-  required: false
-  selector:
-    select:
-      options:
-        - "μg/m³"
-        - "mg/m³"
-
-.unit_voc_ratio: &unit_voc_ratio
-  required: false
-  selector:
-    select:
-      options:
-        - "ppb"
-        - "ppm"
-
-# --- Binary sensor targets ---
-
-.target_gas: &target_gas
-  entity:
-    - domain: binary_sensor
-      device_class: gas
-
-.target_co_binary: &target_co_binary
-  entity:
-    - domain: binary_sensor
-      device_class: carbon_monoxide
-
-.target_smoke: &target_smoke
-  entity:
-    - domain: binary_sensor
-      device_class: smoke
-
-# --- Sensor targets ---
-
-.target_co_sensor: &target_co_sensor
-  entity:
-    - domain: sensor
-      device_class: carbon_monoxide
-
-.target_co2: &target_co2
-  entity:
-    - domain: sensor
-      device_class: carbon_dioxide
-
-.target_pm1: &target_pm1
-  entity:
-    - domain: sensor
-      device_class: pm1
-
-.target_pm25: &target_pm25
-  entity:
-    - domain: sensor
-      device_class: pm25
-
-.target_pm4: &target_pm4
-  entity:
-    - domain: sensor
-      device_class: pm4
-
-.target_pm10: &target_pm10
-  entity:
-    - domain: sensor
-      device_class: pm10
-
-.target_ozone: &target_ozone
-  entity:
-    - domain: sensor
-      device_class: ozone
-
-.target_voc: &target_voc
-  entity:
-    - domain: sensor
-      device_class: volatile_organic_compounds
-
-.target_voc_ratio: &target_voc_ratio
-  entity:
-    - domain: sensor
-      device_class: volatile_organic_compounds_parts
-
-.target_no: &target_no
-  entity:
-    - domain: sensor
-      device_class: nitrogen_monoxide
-
-.target_no2: &target_no2
-  entity:
-    - domain: sensor
-      device_class: nitrogen_dioxide
-
-.target_n2o: &target_n2o
-  entity:
-    - domain: sensor
-      device_class: nitrous_oxide
-
-.target_so2: &target_so2
-  entity:
-    - domain: sensor
-      device_class: sulphur_dioxide
-
-# --- Binary sensor conditions ---
-
-.condition_binary_common: &condition_binary_common
-  fields:
-    behavior: *condition_behavior
-
-is_gas_detected:
-  <<: *condition_binary_common
-  target: *target_gas
-
-is_gas_cleared:
-  <<: *condition_binary_common
-  target: *target_gas
-
-is_co_detected:
-  <<: *condition_binary_common
-  target: *target_co_binary
-
-is_co_cleared:
-  <<: *condition_binary_common
-  target: *target_co_binary
-
-is_smoke_detected:
-  <<: *condition_binary_common
-  target: *target_smoke
-
-is_smoke_cleared:
-  <<: *condition_binary_common
-  target: *target_smoke
-
-# --- Numerical sensor conditions with unit conversion ---
-
-is_co_value:
-  target: *target_co_sensor
-  fields:
-    behavior: *condition_behavior
-    above: *number_or_entity_co
-    below: *number_or_entity_co
-    unit: *unit_co
-
-is_ozone_value:
-  target: *target_ozone
-  fields:
-    behavior: *condition_behavior
-    above: *number_or_entity_ozone
-    below: *number_or_entity_ozone
-    unit: *unit_ozone
-
-is_voc_value:
-  target: *target_voc
-  fields:
-    behavior: *condition_behavior
-    above: *number_or_entity_voc
-    below: *number_or_entity_voc
-    unit: *unit_voc
-
-is_voc_ratio_value:
-  target: *target_voc_ratio
-  fields:
-    behavior: *condition_behavior
-    above: *number_or_entity_voc_ratio
-    below: *number_or_entity_voc_ratio
-    unit: *unit_voc_ratio
-
-is_no_value:
-  target: *target_no
-  fields:
-    behavior: *condition_behavior
-    above: *number_or_entity_no
-    below: *number_or_entity_no
-    unit: *unit_no
-
-is_no2_value:
-  target: *target_no2
-  fields:
-    behavior: *condition_behavior
-    above: *number_or_entity_no2
-    below: *number_or_entity_no2
-    unit: *unit_no2
-
-is_so2_value:
-  target: *target_so2
-  fields:
-    behavior: *condition_behavior
-    above: *number_or_entity_so2
-    below: *number_or_entity_so2
-    unit: *unit_so2
-
-# --- Numerical sensor conditions without unit conversion ---
-
-is_co2_value:
-  target: *target_co2
-  fields:
-    behavior: *condition_behavior
-    above: *number_or_entity_co2
-    below: *number_or_entity_co2
-
-is_pm1_value:
-  target: *target_pm1
-  fields:
-    behavior: *condition_behavior
-    above: *number_or_entity_pm1
-    below: *number_or_entity_pm1
-
-is_pm25_value:
-  target: *target_pm25
-  fields:
-    behavior: *condition_behavior
-    above: *number_or_entity_pm25
-    below: *number_or_entity_pm25
-
-is_pm4_value:
-  target: *target_pm4
-  fields:
-    behavior: *condition_behavior
-    above: *number_or_entity_pm4
-    below: *number_or_entity_pm4
-
-is_pm10_value:
-  target: *target_pm10
-  fields:
-    behavior: *condition_behavior
-    above: *number_or_entity_pm10
-    below: *number_or_entity_pm10
-
-is_n2o_value:
-  target: *target_n2o
-  fields:
-    behavior: *condition_behavior
-    above: *number_or_entity_n2o
-    below: *number_or_entity_n2o

homeassistant/components/air_quality/icons.json

@@ -1,164 +1,7 @@
 {
-  "conditions": {
-    "is_co2_value": {
-      "condition": "mdi:molecule-co2"
-    },
-    "is_co_cleared": {
-      "condition": "mdi:check-circle"
-    },
-    "is_co_detected": {
-      "condition": "mdi:molecule-co"
-    },
-    "is_co_value": {
-      "condition": "mdi:molecule-co"
-    },
-    "is_gas_cleared": {
-      "condition": "mdi:check-circle"
-    },
-    "is_gas_detected": {
-      "condition": "mdi:gas-cylinder"
-    },
-    "is_n2o_value": {
-      "condition": "mdi:factory"
-    },
-    "is_no2_value": {
-      "condition": "mdi:factory"
-    },
-    "is_no_value": {
-      "condition": "mdi:factory"
-    },
-    "is_ozone_value": {
-      "condition": "mdi:weather-sunny-alert"
-    },
-    "is_pm10_value": {
-      "condition": "mdi:blur"
-    },
-    "is_pm1_value": {
-      "condition": "mdi:blur"
-    },
-    "is_pm25_value": {
-      "condition": "mdi:blur"
-    },
-    "is_pm4_value": {
-      "condition": "mdi:blur"
-    },
-    "is_smoke_cleared": {
-      "condition": "mdi:check-circle"
-    },
-    "is_smoke_detected": {
-      "condition": "mdi:smoke-detector-variant"
-    },
-    "is_so2_value": {
-      "condition": "mdi:factory"
-    },
-    "is_voc_ratio_value": {
-      "condition": "mdi:air-filter"
-    },
-    "is_voc_value": {
-      "condition": "mdi:air-filter"
-    }
-  },
   "entity_component": {
     "_": {
       "default": "mdi:air-filter"
     }
-  },
-  "triggers": {
-    "co2_changed": {
-      "trigger": "mdi:molecule-co2"
-    },
-    "co2_crossed_threshold": {
-      "trigger": "mdi:molecule-co2"
-    },
-    "co_changed": {
-      "trigger": "mdi:molecule-co"
-    },
-    "co_cleared": {
-      "trigger": "mdi:check-circle"
-    },
-    "co_crossed_threshold": {
-      "trigger": "mdi:molecule-co"
-    },
-    "co_detected": {
-      "trigger": "mdi:molecule-co"
-    },
-    "gas_cleared": {
-      "trigger": "mdi:check-circle"
-    },
-    "gas_detected": {
-      "trigger": "mdi:gas-cylinder"
-    },
-    "n2o_changed": {
-      "trigger": "mdi:factory"
-    },
-    "n2o_crossed_threshold": {
-      "trigger": "mdi:factory"
-    },
-    "no2_changed": {
-      "trigger": "mdi:factory"
-    },
-    "no2_crossed_threshold": {
-      "trigger": "mdi:factory"
-    },
-    "no_changed": {
-      "trigger": "mdi:factory"
-    },
-    "no_crossed_threshold": {
-      "trigger": "mdi:factory"
-    },
-    "ozone_changed": {
-      "trigger": "mdi:weather-sunny-alert"
-    },
-    "ozone_crossed_threshold": {
-      "trigger": "mdi:weather-sunny-alert"
-    },
-    "pm10_changed": {
-      "trigger": "mdi:blur"
-    },
-    "pm10_crossed_threshold": {
-      "trigger": "mdi:blur"
-    },
-    "pm1_changed": {
-      "trigger": "mdi:blur"
-    },
-    "pm1_crossed_threshold": {
-      "trigger": "mdi:blur"
-    },
-    "pm25_changed": {
-      "trigger": "mdi:blur"
-    },
-    "pm25_crossed_threshold": {
-      "trigger": "mdi:blur"
-    },
-    "pm4_changed": {
-      "trigger": "mdi:blur"
-    },
-    "pm4_crossed_threshold": {
-      "trigger": "mdi:blur"
-    },
-    "smoke_cleared": {
-      "trigger": "mdi:check-circle"
-    },
-    "smoke_detected": {
-      "trigger": "mdi:smoke-detector-variant"
-    },
-    "so2_changed": {
-      "trigger": "mdi:factory"
-    },
-    "so2_crossed_threshold": {
-      "trigger": "mdi:factory"
-    },
-    "voc_changed": {
-      "trigger": "mdi:air-filter"
-    },
-    "voc_crossed_threshold": {
-      "trigger": "mdi:air-filter"
-    },
-    "voc_ratio_changed": {
-      "trigger": "mdi:air-filter"
-    },
-    "voc_ratio_crossed_threshold": {
-      "trigger": "mdi:air-filter"
-    }
   }
 }

homeassistant/components/air_quality/strings.json

@@ -1,964 +0,0 @@
-{
-  "common": {
-    "condition_above_description": "Require the value to be above this value.",
-    "condition_above_name": "Above",
-    "condition_behavior_description": "How the value should match on the targeted entities.",
-    "condition_behavior_name": "Behavior",
-    "condition_below_description": "Require the value to be below this value.",
-    "condition_below_name": "Below",
-    "condition_unit_description": "All values will be converted to this unit when evaluating the condition.",
-    "condition_unit_name": "Unit of measurement",
-    "trigger_behavior_description": "The behavior of the targeted entities to trigger on.",
-    "trigger_behavior_name": "Behavior",
-    "trigger_changed_above_name": "Above",
-    "trigger_changed_below_name": "Below",
-    "trigger_threshold_lower_limit_description": "The lower limit of the threshold.",
-    "trigger_threshold_lower_limit_name": "Lower limit",
-    "trigger_threshold_type_description": "The type of threshold to use.",
-    "trigger_threshold_type_name": "Threshold type",
-    "trigger_threshold_upper_limit_description": "The upper limit of the threshold.",
-    "trigger_threshold_upper_limit_name": "Upper limit",
-    "trigger_unit_description": "All values will be converted to this unit when evaluating the trigger.",
-    "trigger_unit_name": "Unit of measurement"
-  },
-  "conditions": {
-    "is_co2_value": {
-      "description": "Tests the carbon dioxide level of one or more entities.",
-      "fields": {
-        "above": {
-          "description": "[%key:component::air_quality::common::condition_above_description%]",
-          "name": "[%key:component::air_quality::common::condition_above_name%]"
-        },
-        "behavior": {
-          "description": "[%key:component::air_quality::common::condition_behavior_description%]",
-          "name": "[%key:component::air_quality::common::condition_behavior_name%]"
-        },
-        "below": {
-          "description": "[%key:component::air_quality::common::condition_below_description%]",
-          "name": "[%key:component::air_quality::common::condition_below_name%]"
-        }
-      },
-      "name": "Carbon dioxide value"
-    },
-    "is_co_cleared": {
-      "description": "Tests if one or more carbon monoxide sensors are cleared.",
-      "fields": {
-        "behavior": {
-          "description": "[%key:component::air_quality::common::condition_behavior_description%]",
-          "name": "[%key:component::air_quality::common::condition_behavior_name%]"
-        }
-      },
-      "name": "Carbon monoxide cleared"
-    },
-    "is_co_detected": {
-      "description": "Tests if one or more carbon monoxide sensors are detecting carbon monoxide.",
-      "fields": {
-        "behavior": {
-          "description": "[%key:component::air_quality::common::condition_behavior_description%]",
-          "name": "[%key:component::air_quality::common::condition_behavior_name%]"
-        }
-      },
-      "name": "Carbon monoxide detected"
-    },
-    "is_co_value": {
-      "description": "Tests the carbon monoxide level of one or more entities.",
-      "fields": {
-        "above": {
-          "description": "[%key:component::air_quality::common::condition_above_description%]",
-          "name": "[%key:component::air_quality::common::condition_above_name%]"
-        },
-        "behavior": {
-          "description": "[%key:component::air_quality::common::condition_behavior_description%]",
-          "name": "[%key:component::air_quality::common::condition_behavior_name%]"
-        },
-        "below": {
-          "description": "[%key:component::air_quality::common::condition_below_description%]",
-          "name": "[%key:component::air_quality::common::condition_below_name%]"
-        },
-        "unit": {
-          "description": "[%key:component::air_quality::common::condition_unit_description%]",
-          "name": "[%key:component::air_quality::common::condition_unit_name%]"
-        }
-      },
-      "name": "Carbon monoxide value"
-    },
-    "is_gas_cleared": {
-      "description": "Tests if one or more gas sensors are cleared.",
-      "fields": {
-        "behavior": {
-          "description": "[%key:component::air_quality::common::condition_behavior_description%]",
-          "name": "[%key:component::air_quality::common::condition_behavior_name%]"
-        }
-      },
-      "name": "Gas cleared"
-    },
-    "is_gas_detected": {
-      "description": "Tests if one or more gas sensors are detecting gas.",
-      "fields": {
-        "behavior": {
-          "description": "[%key:component::air_quality::common::condition_behavior_description%]",
-          "name": "[%key:component::air_quality::common::condition_behavior_name%]"
-        }
-      },
-      "name": "Gas detected"
-    },
-    "is_n2o_value": {
-      "description": "Tests the nitrous oxide level of one or more entities.",
-      "fields": {
-        "above": {
-          "description": "[%key:component::air_quality::common::condition_above_description%]",
-          "name": "[%key:component::air_quality::common::condition_above_name%]"
-        },
-        "behavior": {
-          "description": "[%key:component::air_quality::common::condition_behavior_description%]",
-          "name": "[%key:component::air_quality::common::condition_behavior_name%]"
-        },
-        "below": {
-          "description": "[%key:component::air_quality::common::condition_below_description%]",
-          "name": "[%key:component::air_quality::common::condition_below_name%]"
-        }
-      },
-      "name": "Nitrous oxide value"
-    },
-    "is_no2_value": {
-      "description": "Tests the nitrogen dioxide level of one or more entities.",
-      "fields": {
-        "above": {
-          "description": "[%key:component::air_quality::common::condition_above_description%]",
-          "name": "[%key:component::air_quality::common::condition_above_name%]"
-        },
-        "behavior": {
-          "description": "[%key:component::air_quality::common::condition_behavior_description%]",
-          "name": "[%key:component::air_quality::common::condition_behavior_name%]"
-        },
-        "below": {
-          "description": "[%key:component::air_quality::common::condition_below_description%]",
-          "name": "[%key:component::air_quality::common::condition_below_name%]"
-        },
-        "unit": {
-          "description": "[%key:component::air_quality::common::condition_unit_description%]",
-          "name": "[%key:component::air_quality::common::condition_unit_name%]"
-        }
-      },
-      "name": "Nitrogen dioxide value"
-    },
-    "is_no_value": {
-      "description": "Tests the nitrogen monoxide level of one or more entities.",
-      "fields": {
-        "above": {
-          "description": "[%key:component::air_quality::common::condition_above_description%]",
-          "name": "[%key:component::air_quality::common::condition_above_name%]"
-        },
-        "behavior": {
-          "description": "[%key:component::air_quality::common::condition_behavior_description%]",
-          "name": "[%key:component::air_quality::common::condition_behavior_name%]"
-        },
-        "below": {
-          "description": "[%key:component::air_quality::common::condition_below_description%]",
-          "name": "[%key:component::air_quality::common::condition_below_name%]"
-        },
-        "unit": {
-          "description": "[%key:component::air_quality::common::condition_unit_description%]",
-          "name": "[%key:component::air_quality::common::condition_unit_name%]"
-        }
-      },
-      "name": "Nitrogen monoxide value"
-    },
-    "is_ozone_value": {
-      "description": "Tests the ozone level of one or more entities.",
-      "fields": {
-        "above": {
-          "description": "[%key:component::air_quality::common::condition_above_description%]",
-          "name": "[%key:component::air_quality::common::condition_above_name%]"
-        },
-        "behavior": {
-          "description": "[%key:component::air_quality::common::condition_behavior_description%]",
-          "name": "[%key:component::air_quality::common::condition_behavior_name%]"
-        },
-        "below": {
-          "description": "[%key:component::air_quality::common::condition_below_description%]",
-          "name": "[%key:component::air_quality::common::condition_below_name%]"
-        },
-        "unit": {
-          "description": "[%key:component::air_quality::common::condition_unit_description%]",
-          "name": "[%key:component::air_quality::common::condition_unit_name%]"
-        }
-      },
-      "name": "Ozone value"
-    },
-    "is_pm10_value": {
-      "description": "Tests the PM10 level of one or more entities.",
-      "fields": {
-        "above": {
-          "description": "[%key:component::air_quality::common::condition_above_description%]",
-          "name": "[%key:component::air_quality::common::condition_above_name%]"
-        },
-        "behavior": {
-          "description": "[%key:component::air_quality::common::condition_behavior_description%]",
-          "name": "[%key:component::air_quality::common::condition_behavior_name%]"
-        },
-        "below": {
-          "description": "[%key:component::air_quality::common::condition_below_description%]",
-          "name": "[%key:component::air_quality::common::condition_below_name%]"
-        }
-      },
-      "name": "PM10 value"
-    },
-    "is_pm1_value": {
-      "description": "Tests the PM1 level of one or more entities.",
-      "fields": {
-        "above": {
-          "description": "[%key:component::air_quality::common::condition_above_description%]",
-          "name": "[%key:component::air_quality::common::condition_above_name%]"
-        },
-        "behavior": {
-          "description": "[%key:component::air_quality::common::condition_behavior_description%]",
-          "name": "[%key:component::air_quality::common::condition_behavior_name%]"
-        },
-        "below": {
-          "description": "[%key:component::air_quality::common::condition_below_description%]",
-          "name": "[%key:component::air_quality::common::condition_below_name%]"
-        }
-      },
-      "name": "PM1 value"
-    },
-    "is_pm25_value": {
-      "description": "Tests the PM2.5 level of one or more entities.",
-      "fields": {
-        "above": {
-          "description": "[%key:component::air_quality::common::condition_above_description%]",
-          "name": "[%key:component::air_quality::common::condition_above_name%]"
-        },
-        "behavior": {
-          "description": "[%key:component::air_quality::common::condition_behavior_description%]",
-          "name": "[%key:component::air_quality::common::condition_behavior_name%]"
-        },
-        "below": {
-          "description": "[%key:component::air_quality::common::condition_below_description%]",
-          "name": "[%key:component::air_quality::common::condition_below_name%]"
-        }
-      },
-      "name": "PM2.5 value"
-    },
-    "is_pm4_value": {
-      "description": "Tests the PM4 level of one or more entities.",
-      "fields": {
-        "above": {
-          "description": "[%key:component::air_quality::common::condition_above_description%]",
-          "name": "[%key:component::air_quality::common::condition_above_name%]"
-        },
-        "behavior": {
-          "description": "[%key:component::air_quality::common::condition_behavior_description%]",
-          "name": "[%key:component::air_quality::common::condition_behavior_name%]"
-        },
-        "below": {
-          "description": "[%key:component::air_quality::common::condition_below_description%]",
-          "name": "[%key:component::air_quality::common::condition_below_name%]"
-        }
-      },
-      "name": "PM4 value"
-    },
-    "is_smoke_cleared": {
-      "description": "Tests if one or more smoke sensors are cleared.",
-      "fields": {
-        "behavior": {
-          "description": "[%key:component::air_quality::common::condition_behavior_description%]",
-          "name": "[%key:component::air_quality::common::condition_behavior_name%]"
-        }
-      },
-      "name": "Smoke cleared"
-    },
-    "is_smoke_detected": {
-      "description": "Tests if one or more smoke sensors are detecting smoke.",
-      "fields": {
-        "behavior": {
-          "description": "[%key:component::air_quality::common::condition_behavior_description%]",
-          "name": "[%key:component::air_quality::common::condition_behavior_name%]"
-        }
-      },
-      "name": "Smoke detected"
-    },
-    "is_so2_value": {
-      "description": "Tests the sulphur dioxide level of one or more entities.",
-      "fields": {
-        "above": {
-          "description": "[%key:component::air_quality::common::condition_above_description%]",
-          "name": "[%key:component::air_quality::common::condition_above_name%]"
-        },
-        "behavior": {
-          "description": "[%key:component::air_quality::common::condition_behavior_description%]",
-          "name": "[%key:component::air_quality::common::condition_behavior_name%]"
-        },
-        "below": {
-          "description": "[%key:component::air_quality::common::condition_below_description%]",
-          "name": "[%key:component::air_quality::common::condition_below_name%]"
-        },
-        "unit": {
-          "description": "[%key:component::air_quality::common::condition_unit_description%]",
-          "name": "[%key:component::air_quality::common::condition_unit_name%]"
-        }
-      },
-      "name": "Sulphur dioxide value"
-    },
-    "is_voc_ratio_value": {
-      "description": "Tests the volatile organic compounds ratio of one or more entities.",
-      "fields": {
-        "above": {
-          "description": "[%key:component::air_quality::common::condition_above_description%]",
-          "name": "[%key:component::air_quality::common::condition_above_name%]"
-        },
-        "behavior": {
-          "description": "[%key:component::air_quality::common::condition_behavior_description%]",
-          "name": "[%key:component::air_quality::common::condition_behavior_name%]"
-        },
-        "below": {
-          "description": "[%key:component::air_quality::common::condition_below_description%]",
-          "name": "[%key:component::air_quality::common::condition_below_name%]"
-        },
-        "unit": {
-          "description": "[%key:component::air_quality::common::condition_unit_description%]",
-          "name": "[%key:component::air_quality::common::condition_unit_name%]"
-        }
-      },
-      "name": "Volatile organic compounds ratio value"
-    },
-    "is_voc_value": {
-      "description": "Tests the volatile organic compounds level of one or more entities.",
-      "fields": {
-        "above": {
-          "description": "[%key:component::air_quality::common::condition_above_description%]",
-          "name": "[%key:component::air_quality::common::condition_above_name%]"
-        },
-        "behavior": {
-          "description": "[%key:component::air_quality::common::condition_behavior_description%]",
-          "name": "[%key:component::air_quality::common::condition_behavior_name%]"
-        },
-        "below": {
-          "description": "[%key:component::air_quality::common::condition_below_description%]",
-          "name": "[%key:component::air_quality::common::condition_below_name%]"
-        },
-        "unit": {
-          "description": "[%key:component::air_quality::common::condition_unit_description%]",
-          "name": "[%key:component::air_quality::common::condition_unit_name%]"
-        }
-      },
-      "name": "Volatile organic compounds value"
-    }
-  },
-  "selector": {
-    "condition_behavior": {
-      "options": {
-        "all": "All",
-        "any": "Any"
-      }
-    },
-    "number_or_entity": {
-      "choices": {
-        "entity": "Entity",
-        "number": "Number"
-      }
-    },
-    "trigger_behavior": {
-      "options": {
-        "any": "Any",
-        "first": "First",
-        "last": "Last"
-      }
-    },
-    "trigger_threshold_type": {
-      "options": {
-        "above": "Above",
-        "below": "Below",
-        "between": "Between",
-        "outside": "Outside"
-      }
-    }
-  },
-  "title": "Air Quality",
-  "triggers": {
-    "co2_changed": {
-      "description": "Triggers after one or more carbon dioxide levels change.",
-      "fields": {
-        "above": {
-          "description": "Only trigger when carbon dioxide level is above this value.",
-          "name": "[%key:component::air_quality::common::trigger_changed_above_name%]"
-        },
-        "below": {
-          "description": "Only trigger when carbon dioxide level is below this value.",
-          "name": "[%key:component::air_quality::common::trigger_changed_below_name%]"
-        }
-      },
-      "name": "Carbon dioxide level changed"
-    },
-    "co2_crossed_threshold": {
-      "description": "Triggers after one or more carbon dioxide levels cross a threshold.",
-      "fields": {
-        "behavior": {
-          "description": "[%key:component::air_quality::common::trigger_behavior_description%]",
-          "name": "[%key:component::air_quality::common::trigger_behavior_name%]"
-        },
-        "lower_limit": {
-          "description": "[%key:component::air_quality::common::trigger_threshold_lower_limit_description%]",
-          "name": "[%key:component::air_quality::common::trigger_threshold_lower_limit_name%]"
-        },
-        "threshold_type": {
-          "description": "[%key:component::air_quality::common::trigger_threshold_type_description%]",
-          "name": "[%key:component::air_quality::common::trigger_threshold_type_name%]"
-        },
-        "upper_limit": {
-          "description": "[%key:component::air_quality::common::trigger_threshold_upper_limit_description%]",
-          "name": "[%key:component::air_quality::common::trigger_threshold_upper_limit_name%]"
-        }
-      },
-      "name": "Carbon dioxide level crossed threshold"
-    },
-    "co_changed": {
-      "description": "Triggers after one or more carbon monoxide levels change.",
-      "fields": {
-        "above": {
-          "description": "Only trigger when carbon monoxide level is above this value.",
-          "name": "[%key:component::air_quality::common::trigger_changed_above_name%]"
-        },
-        "below": {
-          "description": "Only trigger when carbon monoxide level is below this value.",
-          "name": "[%key:component::air_quality::common::trigger_changed_below_name%]"
-        },
-        "unit": {
-          "description": "[%key:component::air_quality::common::trigger_unit_description%]",
-          "name": "[%key:component::air_quality::common::trigger_unit_name%]"
-        }
-      },
-      "name": "Carbon monoxide level changed"
-    },
-    "co_cleared": {
-      "description": "Triggers after one or more carbon monoxide sensors stop detecting carbon monoxide.",
-      "fields": {
-        "behavior": {
-          "description": "[%key:component::air_quality::common::trigger_behavior_description%]",
-          "name": "[%key:component::air_quality::common::trigger_behavior_name%]"
-        }
-      },
-      "name": "Carbon monoxide cleared"
-    },
-    "co_crossed_threshold": {
-      "description": "Triggers after one or more carbon monoxide levels cross a threshold.",
-      "fields": {
-        "behavior": {
-          "description": "[%key:component::air_quality::common::trigger_behavior_description%]",
-          "name": "[%key:component::air_quality::common::trigger_behavior_name%]"
-        },
-        "lower_limit": {
-          "description": "[%key:component::air_quality::common::trigger_threshold_lower_limit_description%]",
-          "name": "[%key:component::air_quality::common::trigger_threshold_lower_limit_name%]"
-        },
-        "threshold_type": {
-          "description": "[%key:component::air_quality::common::trigger_threshold_type_description%]",
-          "name": "[%key:component::air_quality::common::trigger_threshold_type_name%]"
-        },
-        "unit": {
-          "description": "[%key:component::air_quality::common::trigger_unit_description%]",
-          "name": "[%key:component::air_quality::common::trigger_unit_name%]"
-        },
-        "upper_limit": {
-          "description": "[%key:component::air_quality::common::trigger_threshold_upper_limit_description%]",
-          "name": "[%key:component::air_quality::common::trigger_threshold_upper_limit_name%]"
-        }
-      },
-      "name": "Carbon monoxide level crossed threshold"
-    },
-    "co_detected": {
-      "description": "Triggers after one or more carbon monoxide sensors start detecting carbon monoxide.",
-      "fields": {
-        "behavior": {
-          "description": "[%key:component::air_quality::common::trigger_behavior_description%]",
-          "name": "[%key:component::air_quality::common::trigger_behavior_name%]"
-        }
-      },
-      "name": "Carbon monoxide detected"
-    },
-    "gas_cleared": {
-      "description": "Triggers after one or more gas sensors stop detecting gas.",
-      "fields": {
-        "behavior": {
-          "description": "[%key:component::air_quality::common::trigger_behavior_description%]",
-          "name": "[%key:component::air_quality::common::trigger_behavior_name%]"
-        }
-      },
-      "name": "Gas cleared"
-    },
-    "gas_detected": {
-      "description": "Triggers after one or more gas sensors start detecting gas.",
-      "fields": {
-        "behavior": {
-          "description": "[%key:component::air_quality::common::trigger_behavior_description%]",
-          "name": "[%key:component::air_quality::common::trigger_behavior_name%]"
-        }
-      },
-      "name": "Gas detected"
-    },
-    "n2o_changed": {
-      "description": "Triggers after one or more nitrous oxide levels change.",
-      "fields": {
-        "above": {
-          "description": "Only trigger when nitrous oxide level is above this value.",
-          "name": "[%key:component::air_quality::common::trigger_changed_above_name%]"
-        },
-        "below": {
-          "description": "Only trigger when nitrous oxide level is below this value.",
-          "name": "[%key:component::air_quality::common::trigger_changed_below_name%]"
-        }
-      },
-      "name": "Nitrous oxide level changed"
-    },
-    "n2o_crossed_threshold": {
-      "description": "Triggers after one or more nitrous oxide levels cross a threshold.",
-      "fields": {
-        "behavior": {
-          "description": "[%key:component::air_quality::common::trigger_behavior_description%]",
-          "name": "[%key:component::air_quality::common::trigger_behavior_name%]"
-        },
-        "lower_limit": {
-          "description": "[%key:component::air_quality::common::trigger_threshold_lower_limit_description%]",
-          "name": "[%key:component::air_quality::common::trigger_threshold_lower_limit_name%]"
-        },
-        "threshold_type": {
-          "description": "[%key:component::air_quality::common::trigger_threshold_type_description%]",
-          "name": "[%key:component::air_quality::common::trigger_threshold_type_name%]"
-        },
-        "upper_limit": {
-          "description": "[%key:component::air_quality::common::trigger_threshold_upper_limit_description%]",
-          "name": "[%key:component::air_quality::common::trigger_threshold_upper_limit_name%]"
-        }
-      },
-      "name": "Nitrous oxide level crossed threshold"
-    },
-    "no2_changed": {
-      "description": "Triggers after one or more nitrogen dioxide levels change.",
-      "fields": {
-        "above": {
-          "description": "Only trigger when nitrogen dioxide level is above this value.",
-          "name": "[%key:component::air_quality::common::trigger_changed_above_name%]"
-        },
-        "below": {
-          "description": "Only trigger when nitrogen dioxide level is below this value.",
-          "name": "[%key:component::air_quality::common::trigger_changed_below_name%]"
-        },
-        "unit": {
-          "description": "[%key:component::air_quality::common::trigger_unit_description%]",
-          "name": "[%key:component::air_quality::common::trigger_unit_name%]"
-        }
-      },
-      "name": "Nitrogen dioxide level changed"
-    },
-    "no2_crossed_threshold": {
-      "description": "Triggers after one or more nitrogen dioxide levels cross a threshold.",
-      "fields": {
-        "behavior": {
-          "description": "[%key:component::air_quality::common::trigger_behavior_description%]",
-          "name": "[%key:component::air_quality::common::trigger_behavior_name%]"
-        },
-        "lower_limit": {
-          "description": "[%key:component::air_quality::common::trigger_threshold_lower_limit_description%]",
-          "name": "[%key:component::air_quality::common::trigger_threshold_lower_limit_name%]"
-        },
-        "threshold_type": {
-          "description": "[%key:component::air_quality::common::trigger_threshold_type_description%]",
-          "name": "[%key:component::air_quality::common::trigger_threshold_type_name%]"
-        },
-        "unit": {
-          "description": "[%key:component::air_quality::common::trigger_unit_description%]",
-          "name": "[%key:component::air_quality::common::trigger_unit_name%]"
-        },
-        "upper_limit": {
-          "description": "[%key:component::air_quality::common::trigger_threshold_upper_limit_description%]",
-          "name": "[%key:component::air_quality::common::trigger_threshold_upper_limit_name%]"
-        }
-      },
-      "name": "Nitrogen dioxide level crossed threshold"
-    },
-    "no_changed": {
-      "description": "Triggers after one or more nitrogen monoxide levels change.",
-      "fields": {
-        "above": {
-          "description": "Only trigger when nitrogen monoxide level is above this value.",
-          "name": "[%key:component::air_quality::common::trigger_changed_above_name%]"
-        },
-        "below": {
-          "description": "Only trigger when nitrogen monoxide level is below this value.",
-          "name": "[%key:component::air_quality::common::trigger_changed_below_name%]"
-        },
-        "unit": {
-          "description": "[%key:component::air_quality::common::trigger_unit_description%]",
-          "name": "[%key:component::air_quality::common::trigger_unit_name%]"
-        }
-      },
-      "name": "Nitrogen monoxide level changed"
-    },
-    "no_crossed_threshold": {
-      "description": "Triggers after one or more nitrogen monoxide levels cross a threshold.",
-      "fields": {
-        "behavior": {
-          "description": "[%key:component::air_quality::common::trigger_behavior_description%]",
-          "name": "[%key:component::air_quality::common::trigger_behavior_name%]"
-        },
-        "lower_limit": {
-          "description": "[%key:component::air_quality::common::trigger_threshold_lower_limit_description%]",
-          "name": "[%key:component::air_quality::common::trigger_threshold_lower_limit_name%]"
-        },
-        "threshold_type": {
-          "description": "[%key:component::air_quality::common::trigger_threshold_type_description%]",
-          "name": "[%key:component::air_quality::common::trigger_threshold_type_name%]"
-        },
-        "unit": {
-          "description": "[%key:component::air_quality::common::trigger_unit_description%]",
-          "name": "[%key:component::air_quality::common::trigger_unit_name%]"
-        },
-        "upper_limit": {
-          "description": "[%key:component::air_quality::common::trigger_threshold_upper_limit_description%]",
-          "name": "[%key:component::air_quality::common::trigger_threshold_upper_limit_name%]"
-        }
-      },
-      "name": "Nitrogen monoxide level crossed threshold"
-    },
-    "ozone_changed": {
-      "description": "Triggers after one or more ozone levels change.",
-      "fields": {
-        "above": {
-          "description": "Only trigger when ozone level is above this value.",
-          "name": "[%key:component::air_quality::common::trigger_changed_above_name%]"
-        },
-        "below": {
-          "description": "Only trigger when ozone level is below this value.",
-          "name": "[%key:component::air_quality::common::trigger_changed_below_name%]"
-        },
-        "unit": {
-          "description": "[%key:component::air_quality::common::trigger_unit_description%]",
-          "name": "[%key:component::air_quality::common::trigger_unit_name%]"
-        }
-      },
-      "name": "Ozone level changed"
-    },
-    "ozone_crossed_threshold": {
-      "description": "Triggers after one or more ozone levels cross a threshold.",
-      "fields": {
-        "behavior": {
-          "description": "[%key:component::air_quality::common::trigger_behavior_description%]",
-          "name": "[%key:component::air_quality::common::trigger_behavior_name%]"
-        },
-        "lower_limit": {
-          "description": "[%key:component::air_quality::common::trigger_threshold_lower_limit_description%]",
-          "name": "[%key:component::air_quality::common::trigger_threshold_lower_limit_name%]"
-        },
-        "threshold_type": {
-          "description": "[%key:component::air_quality::common::trigger_threshold_type_description%]",
-          "name": "[%key:component::air_quality::common::trigger_threshold_type_name%]"
-        },
-        "unit": {
-          "description": "[%key:component::air_quality::common::trigger_unit_description%]",
-          "name": "[%key:component::air_quality::common::trigger_unit_name%]"
-        },
-        "upper_limit": {
-          "description": "[%key:component::air_quality::common::trigger_threshold_upper_limit_description%]",
-          "name": "[%key:component::air_quality::common::trigger_threshold_upper_limit_name%]"
-        }
-      },
-      "name": "Ozone level crossed threshold"
-    },
-    "pm10_changed": {
-      "description": "Triggers after one or more PM10 levels change.",
-      "fields": {
-        "above": {
-          "description": "Only trigger when PM10 level is above this value.",
-          "name": "[%key:component::air_quality::common::trigger_changed_above_name%]"
-        },
-        "below": {
-          "description": "Only trigger when PM10 level is below this value.",
-          "name": "[%key:component::air_quality::common::trigger_changed_below_name%]"
-        }
-      },
-      "name": "PM10 level changed"
-    },
-    "pm10_crossed_threshold": {
-      "description": "Triggers after one or more PM10 levels cross a threshold.",
-      "fields": {
-        "behavior": {
-          "description": "[%key:component::air_quality::common::trigger_behavior_description%]",
-          "name": "[%key:component::air_quality::common::trigger_behavior_name%]"
-        },
-        "lower_limit": {
-          "description": "[%key:component::air_quality::common::trigger_threshold_lower_limit_description%]",
-          "name": "[%key:component::air_quality::common::trigger_threshold_lower_limit_name%]"
-        },
-        "threshold_type": {
-          "description": "[%key:component::air_quality::common::trigger_threshold_type_description%]",
-          "name": "[%key:component::air_quality::common::trigger_threshold_type_name%]"
-        },
-        "upper_limit": {
-          "description": "[%key:component::air_quality::common::trigger_threshold_upper_limit_description%]",
-          "name": "[%key:component::air_quality::common::trigger_threshold_upper_limit_name%]"
-        }
-      },
-      "name": "PM10 level crossed threshold"
-    },
-    "pm1_changed": {
-      "description": "Triggers after one or more PM1 levels change.",
-      "fields": {
-        "above": {
-          "description": "Only trigger when PM1 level is above this value.",
-          "name": "[%key:component::air_quality::common::trigger_changed_above_name%]"
-        },
-        "below": {
-          "description": "Only trigger when PM1 level is below this value.",
-          "name": "[%key:component::air_quality::common::trigger_changed_below_name%]"
-        }
-      },
-      "name": "PM1 level changed"
-    },
-    "pm1_crossed_threshold": {
-      "description": "Triggers after one or more PM1 levels cross a threshold.",
-      "fields": {
-        "behavior": {
-          "description": "[%key:component::air_quality::common::trigger_behavior_description%]",
-          "name": "[%key:component::air_quality::common::trigger_behavior_name%]"
-        },
-        "lower_limit": {
-          "description": "[%key:component::air_quality::common::trigger_threshold_lower_limit_description%]",
-          "name": "[%key:component::air_quality::common::trigger_threshold_lower_limit_name%]"
-        },
-        "threshold_type": {
-          "description": "[%key:component::air_quality::common::trigger_threshold_type_description%]",
-          "name": "[%key:component::air_quality::common::trigger_threshold_type_name%]"
-        },
-        "upper_limit": {
-          "description": "[%key:component::air_quality::common::trigger_threshold_upper_limit_description%]",
-          "name": "[%key:component::air_quality::common::trigger_threshold_upper_limit_name%]"
-        }
-      },
-      "name": "PM1 level crossed threshold"
-    },
-    "pm25_changed": {
-      "description": "Triggers after one or more PM2.5 levels change.",
-      "fields": {
-        "above": {
-          "description": "Only trigger when PM2.5 level is above this value.",
-          "name": "[%key:component::air_quality::common::trigger_changed_above_name%]"
-        },
-        "below": {
-          "description": "Only trigger when PM2.5 level is below this value.",
-          "name": "[%key:component::air_quality::common::trigger_changed_below_name%]"
-        }
-      },
-      "name": "PM2.5 level changed"
-    },
-    "pm25_crossed_threshold": {
-      "description": "Triggers after one or more PM2.5 levels cross a threshold.",
-      "fields": {
-        "behavior": {
-          "description": "[%key:component::air_quality::common::trigger_behavior_description%]",
-          "name": "[%key:component::air_quality::common::trigger_behavior_name%]"
-        },
-        "lower_limit": {
-          "description": "[%key:component::air_quality::common::trigger_threshold_lower_limit_description%]",
-          "name": "[%key:component::air_quality::common::trigger_threshold_lower_limit_name%]"
-        },
-        "threshold_type": {
-          "description": "[%key:component::air_quality::common::trigger_threshold_type_description%]",
-          "name": "[%key:component::air_quality::common::trigger_threshold_type_name%]"
-        },
-        "upper_limit": {
-          "description": "[%key:component::air_quality::common::trigger_threshold_upper_limit_description%]",
-          "name": "[%key:component::air_quality::common::trigger_threshold_upper_limit_name%]"
-        }
-      },
-      "name": "PM2.5 level crossed threshold"
-    },
-    "pm4_changed": {
-      "description": "Triggers after one or more PM4 levels change.",
-      "fields": {
-        "above": {
-          "description": "Only trigger when PM4 level is above this value.",
-          "name": "[%key:component::air_quality::common::trigger_changed_above_name%]"
-        },
-        "below": {
-          "description": "Only trigger when PM4 level is below this value.",
-          "name": "[%key:component::air_quality::common::trigger_changed_below_name%]"
-        }
-      },
-      "name": "PM4 level changed"
-    },
-    "pm4_crossed_threshold": {
-      "description": "Triggers after one or more PM4 levels cross a threshold.",
-      "fields": {
-        "behavior": {
-          "description": "[%key:component::air_quality::common::trigger_behavior_description%]",
-          "name": "[%key:component::air_quality::common::trigger_behavior_name%]"
-        },
-        "lower_limit": {
-          "description": "[%key:component::air_quality::common::trigger_threshold_lower_limit_description%]",
-          "name": "[%key:component::air_quality::common::trigger_threshold_lower_limit_name%]"
-        },
-        "threshold_type": {
-          "description": "[%key:component::air_quality::common::trigger_threshold_type_description%]",
-          "name": "[%key:component::air_quality::common::trigger_threshold_type_name%]"
-        },
-        "upper_limit": {
-          "description": "[%key:component::air_quality::common::trigger_threshold_upper_limit_description%]",
-          "name": "[%key:component::air_quality::common::trigger_threshold_upper_limit_name%]"
-        }
-      },
-      "name": "PM4 level crossed threshold"
-    },
-    "smoke_cleared": {
-      "description": "Triggers after one or more smoke sensors stop detecting smoke.",
-      "fields": {
-        "behavior": {
-          "description": "[%key:component::air_quality::common::trigger_behavior_description%]",
-          "name": "[%key:component::air_quality::common::trigger_behavior_name%]"
-        }
-      },
-      "name": "Smoke cleared"
-    },
-    "smoke_detected": {
-      "description": "Triggers after one or more smoke sensors start detecting smoke.",
-      "fields": {
-        "behavior": {
-          "description": "[%key:component::air_quality::common::trigger_behavior_description%]",
-          "name": "[%key:component::air_quality::common::trigger_behavior_name%]"
-        }
-      },
-      "name": "Smoke detected"
-    },
-    "so2_changed": {
-      "description": "Triggers after one or more sulphur dioxide levels change.",
-      "fields": {
-        "above": {
-          "description": "Only trigger when sulphur dioxide level is above this value.",
-          "name": "[%key:component::air_quality::common::trigger_changed_above_name%]"
-        },
-        "below": {
-          "description": "Only trigger when sulphur dioxide level is below this value.",
-          "name": "[%key:component::air_quality::common::trigger_changed_below_name%]"
-        },
-        "unit": {
-          "description": "[%key:component::air_quality::common::trigger_unit_description%]",
-          "name": "[%key:component::air_quality::common::trigger_unit_name%]"
-        }
-      },
-      "name": "Sulphur dioxide level changed"
-    },
-    "so2_crossed_threshold": {
-      "description": "Triggers after one or more sulphur dioxide levels cross a threshold.",
-      "fields": {
-        "behavior": {
-          "description": "[%key:component::air_quality::common::trigger_behavior_description%]",
-          "name": "[%key:component::air_quality::common::trigger_behavior_name%]"
-        },
-        "lower_limit": {
-          "description": "[%key:component::air_quality::common::trigger_threshold_lower_limit_description%]",
-          "name": "[%key:component::air_quality::common::trigger_threshold_lower_limit_name%]"
-        },
-        "threshold_type": {
-          "description": "[%key:component::air_quality::common::trigger_threshold_type_description%]",
-          "name": "[%key:component::air_quality::common::trigger_threshold_type_name%]"
-        },
-        "unit": {
-          "description": "[%key:component::air_quality::common::trigger_unit_description%]",
-          "name": "[%key:component::air_quality::common::trigger_unit_name%]"
-        },
-        "upper_limit": {
-          "description": "[%key:component::air_quality::common::trigger_threshold_upper_limit_description%]",
-          "name": "[%key:component::air_quality::common::trigger_threshold_upper_limit_name%]"
-        }
-      },
-      "name": "Sulphur dioxide level crossed threshold"
-    },
-    "voc_changed": {
-      "description": "Triggers after one or more volatile organic compound levels change.",
-      "fields": {
-        "above": {
-          "description": "Only trigger when volatile organic compounds level is above this value.",
-          "name": "[%key:component::air_quality::common::trigger_changed_above_name%]"
-        },
-        "below": {
-          "description": "Only trigger when volatile organic compounds level is below this value.",
-          "name": "[%key:component::air_quality::common::trigger_changed_below_name%]"
-        },
-        "unit": {
-          "description": "[%key:component::air_quality::common::trigger_unit_description%]",
-          "name": "[%key:component::air_quality::common::trigger_unit_name%]"
-        }
-      },
-      "name": "Volatile organic compounds level changed"
-    },
-    "voc_crossed_threshold": {
-      "description": "Triggers after one or more volatile organic compounds levels cross a threshold.",
-      "fields": {
-        "behavior": {
-          "description": "[%key:component::air_quality::common::trigger_behavior_description%]",
-          "name": "[%key:component::air_quality::common::trigger_behavior_name%]"
-        },
-        "lower_limit": {
-          "description": "[%key:component::air_quality::common::trigger_threshold_lower_limit_description%]",
-          "name": "[%key:component::air_quality::common::trigger_threshold_lower_limit_name%]"
-        },
-        "threshold_type": {
-          "description": "[%key:component::air_quality::common::trigger_threshold_type_description%]",
-          "name": "[%key:component::air_quality::common::trigger_threshold_type_name%]"
-        },
-        "unit": {
-          "description": "[%key:component::air_quality::common::trigger_unit_description%]",
-          "name": "[%key:component::air_quality::common::trigger_unit_name%]"
-        },
-        "upper_limit": {
-          "description": "[%key:component::air_quality::common::trigger_threshold_upper_limit_description%]",
-          "name": "[%key:component::air_quality::common::trigger_threshold_upper_limit_name%]"
-        }
-      },
-      "name": "Volatile organic compounds level crossed threshold"
-    },
-    "voc_ratio_changed": {
-      "description": "Triggers after one or more volatile organic compound ratios change.",
-      "fields": {
-        "above": {
-          "description": "Only trigger when volatile organic compounds ratio is above this value.",
-          "name": "[%key:component::air_quality::common::trigger_changed_above_name%]"
-        },
-        "below": {
-          "description": "Only trigger when volatile organic compounds ratio is below this value.",
-          "name": "[%key:component::air_quality::common::trigger_changed_below_name%]"
-        },
-        "unit": {
-          "description": "[%key:component::air_quality::common::trigger_unit_description%]",
-          "name": "[%key:component::air_quality::common::trigger_unit_name%]"
-        }
-      },
-      "name": "Volatile organic compounds ratio changed"
-    },
-    "voc_ratio_crossed_threshold": {
-      "description": "Triggers after one or more volatile organic compounds ratios cross a threshold.",
-      "fields": {
-        "behavior": {
-          "description": "[%key:component::air_quality::common::trigger_behavior_description%]",
-          "name": "[%key:component::air_quality::common::trigger_behavior_name%]"
-        },
-        "lower_limit": {
-          "description": "[%key:component::air_quality::common::trigger_threshold_lower_limit_description%]",
-          "name": "[%key:component::air_quality::common::trigger_threshold_lower_limit_name%]"
-        },
-        "threshold_type": {
-          "description": "[%key:component::air_quality::common::trigger_threshold_type_description%]",
-          "name": "[%key:component::air_quality::common::trigger_threshold_type_name%]"
-        },
-        "unit": {
-          "description": "[%key:component::air_quality::common::trigger_unit_description%]",
-          "name": "[%key:component::air_quality::common::trigger_unit_name%]"
-        },
-        "upper_limit": {
-          "description": "[%key:component::air_quality::common::trigger_threshold_upper_limit_description%]",
-          "name": "[%key:component::air_quality::common::trigger_threshold_upper_limit_name%]"
-        }
-      },
-      "name": "Volatile organic compounds ratio crossed threshold"
-    }
-  }
-}

homeassistant/components/air_quality/trigger.py

@@ -1,238 +0,0 @@
-"""Provides triggers for air quality."""
-
-from homeassistant.components.binary_sensor import (
-    DOMAIN as BINARY_SENSOR_DOMAIN,
-    BinarySensorDeviceClass,
-)
-from homeassistant.components.sensor import DOMAIN as SENSOR_DOMAIN, SensorDeviceClass
-from homeassistant.const import (
-    CONCENTRATION_MICROGRAMS_PER_CUBIC_METER,
-    CONCENTRATION_PARTS_PER_BILLION,
-    CONCENTRATION_PARTS_PER_MILLION,
-    STATE_OFF,
-    STATE_ON,
-)
-from homeassistant.core import HomeAssistant
-from homeassistant.helpers.automation import DomainSpec, NumericalDomainSpec
-from homeassistant.helpers.trigger import (
-    EntityTargetStateTriggerBase,
-    Trigger,
-    make_entity_numerical_state_changed_trigger,
-    make_entity_numerical_state_changed_with_unit_trigger,
-    make_entity_numerical_state_crossed_threshold_trigger,
-    make_entity_numerical_state_crossed_threshold_with_unit_trigger,
-    make_entity_target_state_trigger,
-)
-from homeassistant.util.unit_conversion import (
-    CarbonMonoxideConcentrationConverter,
-    MassVolumeConcentrationConverter,
-    NitrogenDioxideConcentrationConverter,
-    NitrogenMonoxideConcentrationConverter,
-    OzoneConcentrationConverter,
-    SulphurDioxideConcentrationConverter,
-    UnitlessRatioConverter,
-)
-
-
-def _make_detected_trigger(
-    device_class: BinarySensorDeviceClass,
-) -> type[EntityTargetStateTriggerBase]:
-    """Create a detected trigger for a binary sensor device class."""
-
-    return make_entity_target_state_trigger(
-        {BINARY_SENSOR_DOMAIN: DomainSpec(device_class=device_class)}, STATE_ON
-    )
-
-
-def _make_cleared_trigger(
-    device_class: BinarySensorDeviceClass,
-) -> type[EntityTargetStateTriggerBase]:
-    """Create a cleared trigger for a binary sensor device class."""
-
-    return make_entity_target_state_trigger(
-        {BINARY_SENSOR_DOMAIN: DomainSpec(device_class=device_class)}, STATE_OFF
-    )
-
-
-TRIGGERS: dict[str, type[Trigger]] = {
-    # Binary sensor triggers (detected/cleared)
-    "gas_detected": _make_detected_trigger(BinarySensorDeviceClass.GAS),
-    "gas_cleared": _make_cleared_trigger(BinarySensorDeviceClass.GAS),
-    "co_detected": _make_detected_trigger(BinarySensorDeviceClass.CO),
-    "co_cleared": _make_cleared_trigger(BinarySensorDeviceClass.CO),
-    "smoke_detected": _make_detected_trigger(BinarySensorDeviceClass.SMOKE),
-    "smoke_cleared": _make_cleared_trigger(BinarySensorDeviceClass.SMOKE),
-    # Numerical sensor triggers with unit conversion
-    "co_changed": make_entity_numerical_state_changed_with_unit_trigger(
-        {SENSOR_DOMAIN: NumericalDomainSpec(device_class=SensorDeviceClass.CO)},
-        CONCENTRATION_MICROGRAMS_PER_CUBIC_METER,
-        CarbonMonoxideConcentrationConverter,
-    ),
-    "co_crossed_threshold": make_entity_numerical_state_crossed_threshold_with_unit_trigger(
-        {SENSOR_DOMAIN: NumericalDomainSpec(device_class=SensorDeviceClass.CO)},
-        CONCENTRATION_MICROGRAMS_PER_CUBIC_METER,
-        CarbonMonoxideConcentrationConverter,
-    ),
-    "ozone_changed": make_entity_numerical_state_changed_with_unit_trigger(
-        {SENSOR_DOMAIN: NumericalDomainSpec(device_class=SensorDeviceClass.OZONE)},
-        CONCENTRATION_MICROGRAMS_PER_CUBIC_METER,
-        OzoneConcentrationConverter,
-    ),
-    "ozone_crossed_threshold": make_entity_numerical_state_crossed_threshold_with_unit_trigger(
-        {SENSOR_DOMAIN: NumericalDomainSpec(device_class=SensorDeviceClass.OZONE)},
-        CONCENTRATION_MICROGRAMS_PER_CUBIC_METER,
-        OzoneConcentrationConverter,
-    ),
-    "voc_changed": make_entity_numerical_state_changed_with_unit_trigger(
-        {
-            SENSOR_DOMAIN: NumericalDomainSpec(
-                device_class=SensorDeviceClass.VOLATILE_ORGANIC_COMPOUNDS
-            )
-        },
-        CONCENTRATION_MICROGRAMS_PER_CUBIC_METER,
-        MassVolumeConcentrationConverter,
-    ),
-    "voc_crossed_threshold": make_entity_numerical_state_crossed_threshold_with_unit_trigger(
-        {
-            SENSOR_DOMAIN: NumericalDomainSpec(
-                device_class=SensorDeviceClass.VOLATILE_ORGANIC_COMPOUNDS
-            )
-        },
-        CONCENTRATION_MICROGRAMS_PER_CUBIC_METER,
-        MassVolumeConcentrationConverter,
-    ),
-    "voc_ratio_changed": make_entity_numerical_state_changed_with_unit_trigger(
-        {
-            SENSOR_DOMAIN: NumericalDomainSpec(
-                device_class=SensorDeviceClass.VOLATILE_ORGANIC_COMPOUNDS_PARTS
-            )
-        },
-        CONCENTRATION_PARTS_PER_BILLION,
-        UnitlessRatioConverter,
-    ),
-    "voc_ratio_crossed_threshold": make_entity_numerical_state_crossed_threshold_with_unit_trigger(
-        {
-            SENSOR_DOMAIN: NumericalDomainSpec(
-                device_class=SensorDeviceClass.VOLATILE_ORGANIC_COMPOUNDS_PARTS
-            )
-        },
-        CONCENTRATION_PARTS_PER_BILLION,
-        UnitlessRatioConverter,
-    ),
-    "no_changed": make_entity_numerical_state_changed_with_unit_trigger(
-        {
-            SENSOR_DOMAIN: NumericalDomainSpec(
-                device_class=SensorDeviceClass.NITROGEN_MONOXIDE
-            )
-        },
-        CONCENTRATION_MICROGRAMS_PER_CUBIC_METER,
-        NitrogenMonoxideConcentrationConverter,
-    ),
-    "no_crossed_threshold": make_entity_numerical_state_crossed_threshold_with_unit_trigger(
-        {
-            SENSOR_DOMAIN: NumericalDomainSpec(
-                device_class=SensorDeviceClass.NITROGEN_MONOXIDE
-            )
-        },
-        CONCENTRATION_MICROGRAMS_PER_CUBIC_METER,
-        NitrogenMonoxideConcentrationConverter,
-    ),
-    "no2_changed": make_entity_numerical_state_changed_with_unit_trigger(
-        {
-            SENSOR_DOMAIN: NumericalDomainSpec(
-                device_class=SensorDeviceClass.NITROGEN_DIOXIDE
-            )
-        },
-        CONCENTRATION_MICROGRAMS_PER_CUBIC_METER,
-        NitrogenDioxideConcentrationConverter,
-    ),
-    "no2_crossed_threshold": make_entity_numerical_state_crossed_threshold_with_unit_trigger(
-        {
-            SENSOR_DOMAIN: NumericalDomainSpec(
-                device_class=SensorDeviceClass.NITROGEN_DIOXIDE
-            )
-        },
-        CONCENTRATION_MICROGRAMS_PER_CUBIC_METER,
-        NitrogenDioxideConcentrationConverter,
-    ),
-    "so2_changed": make_entity_numerical_state_changed_with_unit_trigger(
-        {
-            SENSOR_DOMAIN: NumericalDomainSpec(
-                device_class=SensorDeviceClass.SULPHUR_DIOXIDE
-            )
-        },
-        CONCENTRATION_MICROGRAMS_PER_CUBIC_METER,
-        SulphurDioxideConcentrationConverter,
-    ),
-    "so2_crossed_threshold": make_entity_numerical_state_crossed_threshold_with_unit_trigger(
-        {
-            SENSOR_DOMAIN: NumericalDomainSpec(
-                device_class=SensorDeviceClass.SULPHUR_DIOXIDE
-            )
-        },
-        CONCENTRATION_MICROGRAMS_PER_CUBIC_METER,
-        SulphurDioxideConcentrationConverter,
-    ),
-    # Numerical sensor triggers without unit conversion (single-unit device classes)
-    "co2_changed": make_entity_numerical_state_changed_trigger(
-        {SENSOR_DOMAIN: NumericalDomainSpec(device_class=SensorDeviceClass.CO2)},
-        valid_unit=CONCENTRATION_PARTS_PER_MILLION,
-    ),
-    "co2_crossed_threshold": make_entity_numerical_state_crossed_threshold_trigger(
-        {SENSOR_DOMAIN: NumericalDomainSpec(device_class=SensorDeviceClass.CO2)},
-        valid_unit=CONCENTRATION_PARTS_PER_MILLION,
-    ),
-    "pm1_changed": make_entity_numerical_state_changed_trigger(
-        {SENSOR_DOMAIN: NumericalDomainSpec(device_class=SensorDeviceClass.PM1)},
-        valid_unit=CONCENTRATION_MICROGRAMS_PER_CUBIC_METER,
-    ),
-    "pm1_crossed_threshold": make_entity_numerical_state_crossed_threshold_trigger(
-        {SENSOR_DOMAIN: NumericalDomainSpec(device_class=SensorDeviceClass.PM1)},
-        valid_unit=CONCENTRATION_MICROGRAMS_PER_CUBIC_METER,
-    ),
-    "pm25_changed": make_entity_numerical_state_changed_trigger(
-        {SENSOR_DOMAIN: NumericalDomainSpec(device_class=SensorDeviceClass.PM25)},
-        valid_unit=CONCENTRATION_MICROGRAMS_PER_CUBIC_METER,
-    ),
-    "pm25_crossed_threshold": make_entity_numerical_state_crossed_threshold_trigger(
-        {SENSOR_DOMAIN: NumericalDomainSpec(device_class=SensorDeviceClass.PM25)},
-        valid_unit=CONCENTRATION_MICROGRAMS_PER_CUBIC_METER,
-    ),
-    "pm4_changed": make_entity_numerical_state_changed_trigger(
-        {SENSOR_DOMAIN: NumericalDomainSpec(device_class=SensorDeviceClass.PM4)},
-        valid_unit=CONCENTRATION_MICROGRAMS_PER_CUBIC_METER,
-    ),
-    "pm4_crossed_threshold": make_entity_numerical_state_crossed_threshold_trigger(
-        {SENSOR_DOMAIN: NumericalDomainSpec(device_class=SensorDeviceClass.PM4)},
-        valid_unit=CONCENTRATION_MICROGRAMS_PER_CUBIC_METER,
-    ),
-    "pm10_changed": make_entity_numerical_state_changed_trigger(
-        {SENSOR_DOMAIN: NumericalDomainSpec(device_class=SensorDeviceClass.PM10)},
-        valid_unit=CONCENTRATION_MICROGRAMS_PER_CUBIC_METER,
-    ),
-    "pm10_crossed_threshold": make_entity_numerical_state_crossed_threshold_trigger(
-        {SENSOR_DOMAIN: NumericalDomainSpec(device_class=SensorDeviceClass.PM10)},
-        valid_unit=CONCENTRATION_MICROGRAMS_PER_CUBIC_METER,
-    ),
-    "n2o_changed": make_entity_numerical_state_changed_trigger(
-        {
-            SENSOR_DOMAIN: NumericalDomainSpec(
-                device_class=SensorDeviceClass.NITROUS_OXIDE
-            )
-        },
-        valid_unit=CONCENTRATION_MICROGRAMS_PER_CUBIC_METER,
-    ),
-    "n2o_crossed_threshold": make_entity_numerical_state_crossed_threshold_trigger(
-        {
-            SENSOR_DOMAIN: NumericalDomainSpec(
-                device_class=SensorDeviceClass.NITROUS_OXIDE
-            )
-        },
-        valid_unit=CONCENTRATION_MICROGRAMS_PER_CUBIC_METER,
-    ),
-}
-
-
-async def async_get_triggers(hass: HomeAssistant) -> dict[str, type[Trigger]]:
-    """Return the triggers for air quality."""
-    return TRIGGERS

homeassistant/components/air_quality/triggers.yaml

@@ -1,692 +0,0 @@
-.trigger_common_fields:
-  behavior: &trigger_behavior
-    required: true
-    default: any
-    selector:
-      select:
-        translation_key: trigger_behavior
-        options:
-          - first
-          - last
-          - any
-
-.number_or_entity_co: &number_or_entity_co
-  required: false
-  selector:
-    choose:
-      choices:
-        number:
-          selector:
-            number:
-              mode: box
-        entity:
-          selector:
-            entity:
-              filter:
-                - domain: input_number
-                  unit_of_measurement:
-                    - "ppb"
-                    - "ppm"
-                    - "mg/m³"
-                    - "μg/m³"
-                - domain: sensor
-                  device_class: carbon_monoxide
-                - domain: number
-                  device_class: carbon_monoxide
-      translation_key: number_or_entity
-
-.number_or_entity_co2: &number_or_entity_co2
-  required: false
-  selector:
-    choose:
-      choices:
-        number:
-          selector:
-            number:
-              mode: box
-              unit_of_measurement: "ppm"
-        entity:
-          selector:
-            entity:
-              filter:
-                - domain: input_number
-                  unit_of_measurement: "ppm"
-                - domain: sensor
-                  device_class: carbon_dioxide
-                - domain: number
-                  device_class: carbon_dioxide
-      translation_key: number_or_entity
-
-.number_or_entity_pm1: &number_or_entity_pm1
-  required: false
-  selector:
-    choose:
-      choices:
-        number:
-          selector:
-            number:
-              mode: box
-              unit_of_measurement: "μg/m³"
-        entity:
-          selector:
-            entity:
-              filter:
-                - domain: input_number
-                  unit_of_measurement: "μg/m³"
-                - domain: sensor
-                  device_class: pm1
-                - domain: number
-                  device_class: pm1
-      translation_key: number_or_entity
-
-.number_or_entity_pm25: &number_or_entity_pm25
-  required: false
-  selector:
-    choose:
-      choices:
-        number:
-          selector:
-            number:
-              mode: box
-              unit_of_measurement: "μg/m³"
-        entity:
-          selector:
-            entity:
-              filter:
-                - domain: input_number
-                  unit_of_measurement: "μg/m³"
-                - domain: sensor
-                  device_class: pm25
-                - domain: number
-                  device_class: pm25
-      translation_key: number_or_entity
-
-.number_or_entity_pm4: &number_or_entity_pm4
-  required: false
-  selector:
-    choose:
-      choices:
-        number:
-          selector:
-            number:
-              mode: box
-              unit_of_measurement: "μg/m³"
-        entity:
-          selector:
-            entity:
-              filter:
-                - domain: input_number
-                  unit_of_measurement: "μg/m³"
-                - domain: sensor
-                  device_class: pm4
-                - domain: number
-                  device_class: pm4
-      translation_key: number_or_entity
-
-.number_or_entity_pm10: &number_or_entity_pm10
-  required: false
-  selector:
-    choose:
-      choices:
-        number:
-          selector:
-            number:
-              mode: box
-              unit_of_measurement: "μg/m³"
-        entity:
-          selector:
-            entity:
-              filter:
-                - domain: input_number
-                  unit_of_measurement: "μg/m³"
-                - domain: sensor
-                  device_class: pm10
-                - domain: number
-                  device_class: pm10
-      translation_key: number_or_entity
-
-.number_or_entity_ozone: &number_or_entity_ozone
-  required: false
-  selector:
-    choose:
-      choices:
-        number:
-          selector:
-            number:
-              mode: box
-        entity:
-          selector:
-            entity:
-              filter:
-                - domain: input_number
-                  unit_of_measurement:
-                    - "ppb"
-                    - "ppm"
-                    - "μg/m³"
-                - domain: sensor
-                  device_class: ozone
-                - domain: number
-                  device_class: ozone
-      translation_key: number_or_entity
-
-.number_or_entity_voc: &number_or_entity_voc
-  required: false
-  selector:
-    choose:
-      choices:
-        number:
-          selector:
-            number:
-              mode: box
-        entity:
-          selector:
-            entity:
-              filter:
-                - domain: input_number
-                  unit_of_measurement:
-                    - "μg/m³"
-                    - "mg/m³"
-                - domain: sensor
-                  device_class: volatile_organic_compounds
-                - domain: number
-                  device_class: volatile_organic_compounds
-      translation_key: number_or_entity
-
-.number_or_entity_voc_ratio: &number_or_entity_voc_ratio
-  required: false
-  selector:
-    choose:
-      choices:
-        number:
-          selector:
-            number:
-              mode: box
-        entity:
-          selector:
-            entity:
-              filter:
-                - domain: input_number
-                  unit_of_measurement:
-                    - "ppb"
-                    - "ppm"
-                - domain: sensor
-                  device_class: volatile_organic_compounds_parts
-                - domain: number
-                  device_class: volatile_organic_compounds_parts
-      translation_key: number_or_entity
-
-.number_or_entity_no: &number_or_entity_no
-  required: false
-  selector:
-    choose:
-      choices:
-        number:
-          selector:
-            number:
-              mode: box
-        entity:
-          selector:
-            entity:
-              filter:
-                - domain: input_number
-                  unit_of_measurement:
-                    - "ppb"
-                    - "μg/m³"
-                - domain: sensor
-                  device_class: nitrogen_monoxide
-                - domain: number
-                  device_class: nitrogen_monoxide
-      translation_key: number_or_entity
-
-.number_or_entity_no2: &number_or_entity_no2
-  required: false
-  selector:
-    choose:
-      choices:
-        number:
-          selector:
-            number:
-              mode: box
-        entity:
-          selector:
-            entity:
-              filter:
-                - domain: input_number
-                  unit_of_measurement:
-                    - "ppb"
-                    - "ppm"
-                    - "μg/m³"
-                - domain: sensor
-                  device_class: nitrogen_dioxide
-                - domain: number
-                  device_class: nitrogen_dioxide
-      translation_key: number_or_entity
-
-.number_or_entity_n2o: &number_or_entity_n2o
-  required: false
-  selector:
-    choose:
-      choices:
-        number:
-          selector:
-            number:
-              mode: box
-              unit_of_measurement: "μg/m³"
-        entity:
-          selector:
-            entity:
-              filter:
-                - domain: input_number
-                  unit_of_measurement: "μg/m³"
-                - domain: sensor
-                  device_class: nitrous_oxide
-                - domain: number
-                  device_class: nitrous_oxide
-      translation_key: number_or_entity
-
-.number_or_entity_so2: &number_or_entity_so2
-  required: false
-  selector:
-    choose:
-      choices:
-        number:
-          selector:
-            number:
-              mode: box
-        entity:
-          selector:
-            entity:
-              filter:
-                - domain: input_number
-                  unit_of_measurement:
-                    - "ppb"
-                    - "μg/m³"
-                - domain: sensor
-                  device_class: sulphur_dioxide
-                - domain: number
-                  device_class: sulphur_dioxide
-      translation_key: number_or_entity
-
-.unit_co: &unit_co
-  required: false
-  selector:
-    select:
-      options:
-        - "ppb"
-        - "ppm"
-        - "mg/m³"
-        - "μg/m³"
-
-.unit_ozone: &unit_ozone
-  required: false
-  selector:
-    select:
-      options:
-        - "ppb"
-        - "ppm"
-        - "μg/m³"
-
-.unit_no2: &unit_no2
-  required: false
-  selector:
-    select:
-      options:
-        - "ppb"
-        - "ppm"
-        - "μg/m³"
-
-.unit_no: &unit_no
-  required: false
-  selector:
-    select:
-      options:
-        - "ppb"
-        - "μg/m³"
-
-.unit_so2: &unit_so2
-  required: false
-  selector:
-    select:
-      options:
-        - "ppb"
-        - "μg/m³"
-
-.unit_voc: &unit_voc
-  required: false
-  selector:
-    select:
-      options:
-        - "μg/m³"
-        - "mg/m³"
-
-.unit_voc_ratio: &unit_voc_ratio
-  required: false
-  selector:
-    select:
-      options:
-        - "ppb"
-        - "ppm"
-
-.trigger_threshold_type: &trigger_threshold_type
-  required: true
-  default: above
-  selector:
-    select:
-      options:
-        - above
-        - below
-        - between
-        - outside
-      translation_key: trigger_threshold_type
-
-# Binary sensor detected/cleared trigger fields
-.trigger_binary_fields: &trigger_binary_fields
-  behavior: *trigger_behavior
-
-# --- Binary sensor targets ---
-
-.target_gas: &target_gas
-  entity:
-    - domain: binary_sensor
-      device_class: gas
-
-.target_co_binary: &target_co_binary
-  entity:
-    - domain: binary_sensor
-      device_class: carbon_monoxide
-
-.target_smoke: &target_smoke
-  entity:
-    - domain: binary_sensor
-      device_class: smoke
-
-# --- Sensor targets ---
-
-.target_co_sensor: &target_co_sensor
-  entity:
-    - domain: sensor
-      device_class: carbon_monoxide
-
-.target_co2: &target_co2
-  entity:
-    - domain: sensor
-      device_class: carbon_dioxide
-
-.target_pm1: &target_pm1
-  entity:
-    - domain: sensor
-      device_class: pm1
-
-.target_pm25: &target_pm25
-  entity:
-    - domain: sensor
-      device_class: pm25
-
-.target_pm4: &target_pm4
-  entity:
-    - domain: sensor
-      device_class: pm4
-
-.target_pm10: &target_pm10
-  entity:
-    - domain: sensor
-      device_class: pm10
-
-.target_ozone: &target_ozone
-  entity:
-    - domain: sensor
-      device_class: ozone
-
-.target_voc: &target_voc
-  entity:
-    - domain: sensor
-      device_class: volatile_organic_compounds
-
-.target_voc_ratio: &target_voc_ratio
-  entity:
-    - domain: sensor
-      device_class: volatile_organic_compounds_parts
-
-.target_no: &target_no
-  entity:
-    - domain: sensor
-      device_class: nitrogen_monoxide
-
-.target_no2: &target_no2
-  entity:
-    - domain: sensor
-      device_class: nitrogen_dioxide
-
-.target_n2o: &target_n2o
-  entity:
-    - domain: sensor
-      device_class: nitrous_oxide
-
-.target_so2: &target_so2
-  entity:
-    - domain: sensor
-      device_class: sulphur_dioxide
-
-# --- Binary sensor triggers ---
-
-gas_detected:
-  fields: *trigger_binary_fields
-  target: *target_gas
-
-gas_cleared:
-  fields: *trigger_binary_fields
-  target: *target_gas
-
-co_detected:
-  fields: *trigger_binary_fields
-  target: *target_co_binary
-
-co_cleared:
-  fields: *trigger_binary_fields
-  target: *target_co_binary
-
-smoke_detected:
-  fields: *trigger_binary_fields
-  target: *target_smoke
-
-smoke_cleared:
-  fields: *trigger_binary_fields
-  target: *target_smoke
-
-# --- Numerical sensor triggers ---
-
-co_changed:
-  target: *target_co_sensor
-  fields:
-    above: *number_or_entity_co
-    below: *number_or_entity_co
-    unit: *unit_co
-
-co_crossed_threshold:
-  target: *target_co_sensor
-  fields:
-    behavior: *trigger_behavior
-    threshold_type: *trigger_threshold_type
-    lower_limit: *number_or_entity_co
-    upper_limit: *number_or_entity_co
-    unit: *unit_co
-
-co2_changed:
-  target: *target_co2
-  fields:
-    above: *number_or_entity_co2
-    below: *number_or_entity_co2
-
-co2_crossed_threshold:
-  target: *target_co2
-  fields:
-    behavior: *trigger_behavior
-    threshold_type: *trigger_threshold_type
-    lower_limit: *number_or_entity_co2
-    upper_limit: *number_or_entity_co2
-
-pm1_changed:
-  target: *target_pm1
-  fields:
-    above: *number_or_entity_pm1
-    below: *number_or_entity_pm1
-
-pm1_crossed_threshold:
-  target: *target_pm1
-  fields:
-    behavior: *trigger_behavior
-    threshold_type: *trigger_threshold_type
-    lower_limit: *number_or_entity_pm1
-    upper_limit: *number_or_entity_pm1
-
-pm25_changed:
-  target: *target_pm25
-  fields:
-    above: *number_or_entity_pm25
-    below: *number_or_entity_pm25
-
-pm25_crossed_threshold:
-  target: *target_pm25
-  fields:
-    behavior: *trigger_behavior
-    threshold_type: *trigger_threshold_type
-    lower_limit: *number_or_entity_pm25
-    upper_limit: *number_or_entity_pm25
-
-pm4_changed:
-  target: *target_pm4
-  fields:
-    above: *number_or_entity_pm4
-    below: *number_or_entity_pm4
-
-pm4_crossed_threshold:
-  target: *target_pm4
-  fields:
-    behavior: *trigger_behavior
-    threshold_type: *trigger_threshold_type
-    lower_limit: *number_or_entity_pm4
-    upper_limit: *number_or_entity_pm4
-
-pm10_changed:
-  target: *target_pm10
-  fields:
-    above: *number_or_entity_pm10
-    below: *number_or_entity_pm10
-
-pm10_crossed_threshold:
-  target: *target_pm10
-  fields:
-    behavior: *trigger_behavior
-    threshold_type: *trigger_threshold_type
-    lower_limit: *number_or_entity_pm10
-    upper_limit: *number_or_entity_pm10
-
-ozone_changed:
-  target: *target_ozone
-  fields:
-    above: *number_or_entity_ozone
-    below: *number_or_entity_ozone
-    unit: *unit_ozone
-
-ozone_crossed_threshold:
-  target: *target_ozone
-  fields:
-    behavior: *trigger_behavior
-    threshold_type: *trigger_threshold_type
-    lower_limit: *number_or_entity_ozone
-    upper_limit: *number_or_entity_ozone
-    unit: *unit_ozone
-
-voc_changed:
-  target: *target_voc
-  fields:
-    above: *number_or_entity_voc
-    below: *number_or_entity_voc
-    unit: *unit_voc
-
-voc_crossed_threshold:
-  target: *target_voc
-  fields:
-    behavior: *trigger_behavior
-    threshold_type: *trigger_threshold_type
-    lower_limit: *number_or_entity_voc
-    upper_limit: *number_or_entity_voc
-    unit: *unit_voc
-
-voc_ratio_changed:
-  target: *target_voc_ratio
-  fields:
-    above: *number_or_entity_voc_ratio
-    below: *number_or_entity_voc_ratio
-    unit: *unit_voc_ratio
-
-voc_ratio_crossed_threshold:
-  target: *target_voc_ratio
-  fields:
-    behavior: *trigger_behavior
-    threshold_type: *trigger_threshold_type
-    lower_limit: *number_or_entity_voc_ratio
-    upper_limit: *number_or_entity_voc_ratio
-    unit: *unit_voc_ratio
-
-no_changed:
-  target: *target_no
-  fields:
-    above: *number_or_entity_no
-    below: *number_or_entity_no
-    unit: *unit_no
-
-no_crossed_threshold:
-  target: *target_no
-  fields:
-    behavior: *trigger_behavior
-    threshold_type: *trigger_threshold_type
-    lower_limit: *number_or_entity_no
-    upper_limit: *number_or_entity_no
-    unit: *unit_no
-
-no2_changed:
-  target: *target_no2
-  fields:
-    above: *number_or_entity_no2
-    below: *number_or_entity_no2
-    unit: *unit_no2
-
-no2_crossed_threshold:
-  target: *target_no2
-  fields:
-    behavior: *trigger_behavior
-    threshold_type: *trigger_threshold_type
-    lower_limit: *number_or_entity_no2
-    upper_limit: *number_or_entity_no2
-    unit: *unit_no2
-
-n2o_changed:
-  target: *target_n2o
-  fields:
-    above: *number_or_entity_n2o
-    below: *number_or_entity_n2o
-
-n2o_crossed_threshold:
-  target: *target_n2o
-  fields:
-    behavior: *trigger_behavior
-    threshold_type: *trigger_threshold_type
-    lower_limit: *number_or_entity_n2o
-    upper_limit: *number_or_entity_n2o
-
-so2_changed:
-  target: *target_so2
-  fields:
-    above: *number_or_entity_so2
-    below: *number_or_entity_so2
-    unit: *unit_so2
-
-so2_crossed_threshold:
-  target: *target_so2
-  fields:
-    behavior: *trigger_behavior
-    threshold_type: *trigger_threshold_type
-    lower_limit: *number_or_entity_so2
-    upper_limit: *number_or_entity_so2
-    unit: *unit_so2

homeassistant/components/airobot/number.py

@@ -93,6 +93,7 @@ class AirobotNumber(AirobotEntity, NumberEntity):
             raise ServiceValidationError(
                 translation_domain=DOMAIN,
                 translation_key="set_value_failed",
+                translation_placeholders={"error": str(err)},
             ) from err
         else:
             await self.coordinator.async_request_refresh()

homeassistant/components/airobot/strings.json

@@ -112,7 +112,7 @@
       "message": "Failed to set temperature to {temperature}."
     },
     "set_value_failed": {
-      "message": "Failed to set value."
+      "message": "Failed to set value: {error}"
     },
     "switch_turn_off_failed": {
       "message": "Failed to turn off {switch}."

homeassistant/components/airos/__init__.py

@@ -4,16 +4,7 @@ from __future__ import annotations
 
 import logging
 
-from airos.airos6 import AirOS6
 from airos.airos8 import AirOS8
-from airos.exceptions import (
-    AirOSConnectionAuthenticationError,
-    AirOSConnectionSetupError,
-    AirOSDataMissingError,
-    AirOSDeviceConnectionError,
-    AirOSKeyDataMissingError,
-)
-from airos.helpers import DetectDeviceData, async_get_firmware_data
 
 from homeassistant.const import (
     CONF_HOST,
@@ -24,11 +15,6 @@ from homeassistant.const import (
     Platform,
 )
 from homeassistant.core import HomeAssistant, callback
-from homeassistant.exceptions import (
-    ConfigEntryAuthFailed,
-    ConfigEntryError,
-    ConfigEntryNotReady,
-)
 from homeassistant.helpers import device_registry as dr, entity_registry as er
 from homeassistant.helpers.aiohttp_client import async_get_clientsession
 
@@ -53,40 +39,15 @@ async def async_setup_entry(hass: HomeAssistant, entry: AirOSConfigEntry) -> boo
         hass, verify_ssl=entry.data[SECTION_ADVANCED_SETTINGS][CONF_VERIFY_SSL]
     )
 
-    conn_data = {
-        CONF_HOST: entry.data[CONF_HOST],
-        CONF_USERNAME: entry.data[CONF_USERNAME],
-        CONF_PASSWORD: entry.data[CONF_PASSWORD],
-        "use_ssl": entry.data[SECTION_ADVANCED_SETTINGS][CONF_SSL],
-        "session": session,
-    }
-
-    # Determine firmware version before creating the device instance
-    try:
-        device_data: DetectDeviceData = await async_get_firmware_data(**conn_data)
-    except (
-        AirOSConnectionSetupError,
-        AirOSDeviceConnectionError,
-        TimeoutError,
-    ) as err:
-        raise ConfigEntryNotReady from err
-    except (
-        AirOSConnectionAuthenticationError,
-        AirOSDataMissingError,
-    ) as err:
-        raise ConfigEntryAuthFailed from err
-    except AirOSKeyDataMissingError as err:
-        raise ConfigEntryError("key_data_missing") from err
-    except Exception as err:
-        raise ConfigEntryError("unknown") from err
-
-    airos_class: type[AirOS8 | AirOS6] = (
-        AirOS8 if device_data["fw_major"] == 8 else AirOS6
+    airos_device = AirOS8(
+        host=entry.data[CONF_HOST],
+        username=entry.data[CONF_USERNAME],
+        password=entry.data[CONF_PASSWORD],
+        session=session,
+        use_ssl=entry.data[SECTION_ADVANCED_SETTINGS][CONF_SSL],
     )
 
-    airos_device = airos_class(**conn_data)
-
-    coordinator = AirOSDataUpdateCoordinator(hass, entry, device_data, airos_device)
+    coordinator = AirOSDataUpdateCoordinator(hass, entry, airos_device)
     await coordinator.async_config_entry_first_refresh()
 
     entry.runtime_data = coordinator

homeassistant/components/airos/binary_sensor.py

@@ -4,9 +4,7 @@ from __future__ import annotations
 
 from collections.abc import Callable
 from dataclasses import dataclass
-from typing import Generic, TypeVar
-
-from airos.data import AirOSDataBaseClass
+import logging
 
 from homeassistant.components.binary_sensor import (
     BinarySensorDeviceClass,
@@ -20,24 +18,25 @@ from homeassistant.helpers.entity_platform import AddConfigEntryEntitiesCallback
 from .coordinator import AirOS8Data, AirOSConfigEntry, AirOSDataUpdateCoordinator
 from .entity import AirOSEntity
 
-PARALLEL_UPDATES = 0
+_LOGGER = logging.getLogger(__name__)
 
-AirOSDataModel = TypeVar("AirOSDataModel", bound=AirOSDataBaseClass)
+PARALLEL_UPDATES = 0
 
 
 @dataclass(frozen=True, kw_only=True)
-class AirOSBinarySensorEntityDescription(
-    BinarySensorEntityDescription,
-    Generic[AirOSDataModel],
-):
+class AirOSBinarySensorEntityDescription(BinarySensorEntityDescription):
     """Describe an AirOS binary sensor."""
 
-    value_fn: Callable[[AirOSDataModel], bool]
+    value_fn: Callable[[AirOS8Data], bool]
 
 
-AirOS8BinarySensorEntityDescription = AirOSBinarySensorEntityDescription[AirOS8Data]
-
-COMMON_BINARY_SENSORS: tuple[AirOSBinarySensorEntityDescription, ...] = (
+BINARY_SENSORS: tuple[AirOSBinarySensorEntityDescription, ...] = (
+    AirOSBinarySensorEntityDescription(
+        key="portfw",
+        translation_key="port_forwarding",
+        entity_category=EntityCategory.DIAGNOSTIC,
+        value_fn=lambda data: data.portfw,
+    ),
     AirOSBinarySensorEntityDescription(
         key="dhcp_client",
         translation_key="dhcp_client",
@@ -54,23 +53,6 @@ COMMON_BINARY_SENSORS: tuple[AirOSBinarySensorEntityDescription, ...] = (
         entity_registry_enabled_default=False,
     ),
     AirOSBinarySensorEntityDescription(
-        key="pppoe",
-        translation_key="pppoe",
-        device_class=BinarySensorDeviceClass.CONNECTIVITY,
-        entity_category=EntityCategory.DIAGNOSTIC,
-        value_fn=lambda data: data.services.pppoe,
-        entity_registry_enabled_default=False,
-    ),
-)
-
-AIROS8_BINARY_SENSORS: tuple[AirOS8BinarySensorEntityDescription, ...] = (
-    AirOS8BinarySensorEntityDescription(
-        key="portfw",
-        translation_key="port_forwarding",
-        entity_category=EntityCategory.DIAGNOSTIC,
-        value_fn=lambda data: data.portfw,
-    ),
-    AirOS8BinarySensorEntityDescription(
         key="dhcp6_server",
         translation_key="dhcp6_server",
         device_class=BinarySensorDeviceClass.RUNNING,
@@ -78,6 +60,14 @@ AIROS8_BINARY_SENSORS: tuple[AirOS8BinarySensorEntityDescription, ...] = (
         value_fn=lambda data: data.services.dhcp6d_stateful,
         entity_registry_enabled_default=False,
     ),
+    AirOSBinarySensorEntityDescription(
+        key="pppoe",
+        translation_key="pppoe",
+        device_class=BinarySensorDeviceClass.CONNECTIVITY,
+        entity_category=EntityCategory.DIAGNOSTIC,
+        value_fn=lambda data: data.services.pppoe,
+        entity_registry_enabled_default=False,
+    ),
 )
 
 
@@ -89,18 +79,9 @@ async def async_setup_entry(
     """Set up the AirOS binary sensors from a config entry."""
     coordinator = config_entry.runtime_data
 
-    entities = [
-        AirOSBinarySensor(coordinator, description)
-        for description in COMMON_BINARY_SENSORS
-    ]
-
-    if coordinator.device_data["fw_major"] == 8:
-        entities.extend(
-            AirOSBinarySensor(coordinator, description)
-            for description in AIROS8_BINARY_SENSORS
-        )
-
-    async_add_entities(entities)
+    async_add_entities(
+        AirOSBinarySensor(coordinator, description) for description in BINARY_SENSORS
+    )
 
 
 class AirOSBinarySensor(AirOSEntity, BinarySensorEntity):

homeassistant/components/airos/button.py

@@ -2,6 +2,8 @@
 
 from __future__ import annotations
 
+import logging
+
 from airos.exceptions import AirOSException
 
 from homeassistant.components.button import (
@@ -16,6 +18,8 @@ from homeassistant.helpers.entity_platform import AddConfigEntryEntitiesCallback
 from .coordinator import DOMAIN, AirOSConfigEntry, AirOSDataUpdateCoordinator
 from .entity import AirOSEntity
 
+_LOGGER = logging.getLogger(__name__)
+
 PARALLEL_UPDATES = 0
 
 REBOOT_BUTTON = ButtonEntityDescription(

homeassistant/components/airos/config_flow.py

@@ -7,8 +7,6 @@ from collections.abc import Mapping
 import logging
 from typing import Any
 
-from airos.airos6 import AirOS6
-from airos.airos8 import AirOS8
 from airos.discovery import airos_discover_devices
 from airos.exceptions import (
     AirOSConnectionAuthenticationError,
@@ -19,7 +17,6 @@ from airos.exceptions import (
     AirOSKeyDataMissingError,
     AirOSListenerError,
 )
-from airos.helpers import DetectDeviceData, async_get_firmware_data
 import voluptuous as vol
 
 from homeassistant.config_entries import (
@@ -56,11 +53,10 @@ from .const import (
     MAC_ADDRESS,
     SECTION_ADVANCED_SETTINGS,
 )
+from .coordinator import AirOS8
 
 _LOGGER = logging.getLogger(__name__)
 
-AirOSDeviceDetect = AirOS8 | AirOS6
-
 # Discovery duration in seconds, airOS announces every 20 seconds
 DISCOVER_INTERVAL: int = 30
 
@@ -96,7 +92,7 @@ class AirOSConfigFlow(ConfigFlow, domain=DOMAIN):
     def __init__(self) -> None:
         """Initialize the config flow."""
         super().__init__()
-        self.airos_device: AirOSDeviceDetect
+        self.airos_device: AirOS8
         self.errors: dict[str, str] = {}
         self.discovered_devices: dict[str, dict[str, Any]] = {}
         self.discovery_abort_reason: str | None = None
@@ -139,14 +135,16 @@ class AirOSConfigFlow(ConfigFlow, domain=DOMAIN):
             verify_ssl=config_data[SECTION_ADVANCED_SETTINGS][CONF_VERIFY_SSL],
         )
 
+        airos_device = AirOS8(
+            host=config_data[CONF_HOST],
+            username=config_data[CONF_USERNAME],
+            password=config_data[CONF_PASSWORD],
+            session=session,
+            use_ssl=config_data[SECTION_ADVANCED_SETTINGS][CONF_SSL],
+        )
         try:
-            device_data: DetectDeviceData = await async_get_firmware_data(
-                host=config_data[CONF_HOST],
-                username=config_data[CONF_USERNAME],
-                password=config_data[CONF_PASSWORD],
-                session=session,
-                use_ssl=config_data[SECTION_ADVANCED_SETTINGS][CONF_SSL],
-            )
+            await airos_device.login()
+            airos_data = await airos_device.status()
 
         except (
             AirOSConnectionSetupError,
@@ -161,14 +159,14 @@ class AirOSConfigFlow(ConfigFlow, domain=DOMAIN):
             _LOGGER.exception("Unexpected exception during credential validation")
             self.errors["base"] = "unknown"
         else:
-            await self.async_set_unique_id(device_data["mac"])
+            await self.async_set_unique_id(airos_data.derived.mac)
 
             if self.source in [SOURCE_REAUTH, SOURCE_RECONFIGURE]:
                 self._abort_if_unique_id_mismatch()
             else:
                 self._abort_if_unique_id_configured()
 
-            return {"title": device_data["hostname"], "data": config_data}
+            return {"title": airos_data.host.hostname, "data": config_data}
 
         return None
 

homeassistant/components/airos/coordinator.py

@@ -4,7 +4,6 @@ from __future__ import annotations
 
 import logging
 
-from airos.airos6 import AirOS6, AirOS6Data
 from airos.airos8 import AirOS8, AirOS8Data
 from airos.exceptions import (
     AirOSConnectionAuthenticationError,
@@ -12,7 +11,6 @@ from airos.exceptions import (
     AirOSDataMissingError,
     AirOSDeviceConnectionError,
 )
-from airos.helpers import DetectDeviceData
 
 from homeassistant.config_entries import ConfigEntry
 from homeassistant.core import HomeAssistant
@@ -23,28 +21,19 @@ from .const import DOMAIN, SCAN_INTERVAL
 
 _LOGGER = logging.getLogger(__name__)
 
-AirOSDeviceDetect = AirOS8 | AirOS6
-AirOSDataDetect = AirOS8Data | AirOS6Data
-
 type AirOSConfigEntry = ConfigEntry[AirOSDataUpdateCoordinator]
 
 
-class AirOSDataUpdateCoordinator(DataUpdateCoordinator[AirOSDataDetect]):
+class AirOSDataUpdateCoordinator(DataUpdateCoordinator[AirOS8Data]):
     """Class to manage fetching AirOS data from single endpoint."""
 
-    airos_device: AirOSDeviceDetect
     config_entry: AirOSConfigEntry
 
     def __init__(
-        self,
-        hass: HomeAssistant,
-        config_entry: AirOSConfigEntry,
-        device_data: DetectDeviceData,
-        airos_device: AirOSDeviceDetect,
+        self, hass: HomeAssistant, config_entry: AirOSConfigEntry, airos_device: AirOS8
     ) -> None:
         """Initialize the coordinator."""
         self.airos_device = airos_device
-        self.device_data = device_data
         super().__init__(
             hass,
             _LOGGER,
@@ -53,7 +42,7 @@ class AirOSDataUpdateCoordinator(DataUpdateCoordinator[AirOSDataDetect]):
             update_interval=SCAN_INTERVAL,
         )
 
-    async def _async_update_data(self) -> AirOSDataDetect:
+    async def _async_update_data(self) -> AirOS8Data:
         """Fetch data from AirOS."""
         try:
             await self.airos_device.login()
@@ -73,7 +62,7 @@ class AirOSDataUpdateCoordinator(DataUpdateCoordinator[AirOSDataDetect]):
                 translation_domain=DOMAIN,
                 translation_key="cannot_connect",
             ) from err
-        except AirOSDataMissingError as err:
+        except (AirOSDataMissingError,) as err:
             _LOGGER.error("Expected data not returned by airOS device: %s", err)
             raise UpdateFailed(
                 translation_domain=DOMAIN,

homeassistant/components/airos/manifest.json

@@ -7,6 +7,6 @@
   "documentation": "https://www.home-assistant.io/integrations/airos",
   "integration_type": "device",
   "iot_class": "local_polling",
-  "quality_scale": "platinum",
+  "quality_scale": "silver",
   "requirements": ["airos==0.6.4"]
 }

homeassistant/components/airos/quality_scale.yaml

@@ -42,20 +42,16 @@ rules:
   # Gold
   devices: done
   diagnostics: done
-  discovery-update-info: done
-  discovery:
-    status: exempt
-    comment: No way to detect device on the network
+  discovery-update-info: todo
+  discovery: todo
   docs-data-update: done
-  docs-examples: done
+  docs-examples: todo
   docs-known-limitations: done
   docs-supported-devices: done
   docs-supported-functions: done
   docs-troubleshooting: done
   docs-use-cases: done
-  dynamic-devices:
-    status: exempt
-    comment: single airOS device per config entry; peer/remote endpoints are not modeled as child devices/entities at this time
+  dynamic-devices: todo
   entity-category: done
   entity-device-class: done
   entity-disabled-by-default: done
@@ -65,10 +61,8 @@ rules:
     status: exempt
     comment: no (custom) icons used or envisioned
   reconfiguration-flow: done
-  repair-issues: done
-  stale-devices:
-    status: exempt
-    comment: single airOS device per config entry; peer/remote endpoints are not modeled as child devices/entities at this time
+  repair-issues: todo
+  stale-devices: todo
 
   # Platinum
   async-dependency: done

homeassistant/components/airos/sensor.py

@@ -5,14 +5,8 @@ from __future__ import annotations
 from collections.abc import Callable
 from dataclasses import dataclass
 import logging
-from typing import Generic, TypeVar
 
-from airos.data import (
-    AirOSDataBaseClass,
-    DerivedWirelessMode,
-    DerivedWirelessRole,
-    NetRole,
-)
+from airos.data import DerivedWirelessMode, DerivedWirelessRole, NetRole
 
 from homeassistant.components.sensor import (
     SensorDeviceClass,
@@ -43,19 +37,15 @@ WIRELESS_ROLE_OPTIONS = [mode.value for mode in DerivedWirelessRole]
 
 PARALLEL_UPDATES = 0
 
-AirOSDataModel = TypeVar("AirOSDataModel", bound=AirOSDataBaseClass)
-
 
 @dataclass(frozen=True, kw_only=True)
-class AirOSSensorEntityDescription(SensorEntityDescription, Generic[AirOSDataModel]):
+class AirOSSensorEntityDescription(SensorEntityDescription):
     """Describe an AirOS sensor."""
 
-    value_fn: Callable[[AirOSDataModel], StateType]
+    value_fn: Callable[[AirOS8Data], StateType]
 
 
-AirOS8SensorEntityDescription = AirOSSensorEntityDescription[AirOS8Data]
-
-COMMON_SENSORS: tuple[AirOSSensorEntityDescription, ...] = (
+SENSORS: tuple[AirOSSensorEntityDescription, ...] = (
     AirOSSensorEntityDescription(
         key="host_cpuload",
         translation_key="host_cpuload",
@@ -85,6 +75,54 @@ COMMON_SENSORS: tuple[AirOSSensorEntityDescription, ...] = (
         translation_key="wireless_essid",
         value_fn=lambda data: data.wireless.essid,
     ),
+    AirOSSensorEntityDescription(
+        key="wireless_antenna_gain",
+        translation_key="wireless_antenna_gain",
+        native_unit_of_measurement=SIGNAL_STRENGTH_DECIBELS,
+        device_class=SensorDeviceClass.SIGNAL_STRENGTH,
+        state_class=SensorStateClass.MEASUREMENT,
+        value_fn=lambda data: data.wireless.antenna_gain,
+    ),
+    AirOSSensorEntityDescription(
+        key="wireless_throughput_tx",
+        translation_key="wireless_throughput_tx",
+        native_unit_of_measurement=UnitOfDataRate.KILOBITS_PER_SECOND,
+        device_class=SensorDeviceClass.DATA_RATE,
+        state_class=SensorStateClass.MEASUREMENT,
+        suggested_display_precision=0,
+        suggested_unit_of_measurement=UnitOfDataRate.MEGABITS_PER_SECOND,
+        value_fn=lambda data: data.wireless.throughput.tx,
+    ),
+    AirOSSensorEntityDescription(
+        key="wireless_throughput_rx",
+        translation_key="wireless_throughput_rx",
+        native_unit_of_measurement=UnitOfDataRate.KILOBITS_PER_SECOND,
+        device_class=SensorDeviceClass.DATA_RATE,
+        state_class=SensorStateClass.MEASUREMENT,
+        suggested_display_precision=0,
+        suggested_unit_of_measurement=UnitOfDataRate.MEGABITS_PER_SECOND,
+        value_fn=lambda data: data.wireless.throughput.rx,
+    ),
+    AirOSSensorEntityDescription(
+        key="wireless_polling_dl_capacity",
+        translation_key="wireless_polling_dl_capacity",
+        native_unit_of_measurement=UnitOfDataRate.KILOBITS_PER_SECOND,
+        device_class=SensorDeviceClass.DATA_RATE,
+        state_class=SensorStateClass.MEASUREMENT,
+        suggested_display_precision=0,
+        suggested_unit_of_measurement=UnitOfDataRate.MEGABITS_PER_SECOND,
+        value_fn=lambda data: data.wireless.polling.dl_capacity,
+    ),
+    AirOSSensorEntityDescription(
+        key="wireless_polling_ul_capacity",
+        translation_key="wireless_polling_ul_capacity",
+        native_unit_of_measurement=UnitOfDataRate.KILOBITS_PER_SECOND,
+        device_class=SensorDeviceClass.DATA_RATE,
+        state_class=SensorStateClass.MEASUREMENT,
+        suggested_display_precision=0,
+        suggested_unit_of_measurement=UnitOfDataRate.MEGABITS_PER_SECOND,
+        value_fn=lambda data: data.wireless.polling.ul_capacity,
+    ),
     AirOSSensorEntityDescription(
         key="host_uptime",
         translation_key="host_uptime",
@@ -120,57 +158,6 @@ COMMON_SENSORS: tuple[AirOSSensorEntityDescription, ...] = (
         options=WIRELESS_ROLE_OPTIONS,
         entity_registry_enabled_default=False,
     ),
-    AirOSSensorEntityDescription(
-        key="wireless_antenna_gain",
-        translation_key="wireless_antenna_gain",
-        native_unit_of_measurement=SIGNAL_STRENGTH_DECIBELS,
-        device_class=SensorDeviceClass.SIGNAL_STRENGTH,
-        state_class=SensorStateClass.MEASUREMENT,
-        value_fn=lambda data: data.wireless.antenna_gain,
-    ),
-    AirOSSensorEntityDescription(
-        key="wireless_polling_dl_capacity",
-        translation_key="wireless_polling_dl_capacity",
-        native_unit_of_measurement=UnitOfDataRate.KILOBITS_PER_SECOND,
-        device_class=SensorDeviceClass.DATA_RATE,
-        state_class=SensorStateClass.MEASUREMENT,
-        suggested_display_precision=0,
-        suggested_unit_of_measurement=UnitOfDataRate.MEGABITS_PER_SECOND,
-        value_fn=lambda data: data.wireless.polling.dl_capacity,
-    ),
-    AirOSSensorEntityDescription(
-        key="wireless_polling_ul_capacity",
-        translation_key="wireless_polling_ul_capacity",
-        native_unit_of_measurement=UnitOfDataRate.KILOBITS_PER_SECOND,
-        device_class=SensorDeviceClass.DATA_RATE,
-        state_class=SensorStateClass.MEASUREMENT,
-        suggested_display_precision=0,
-        suggested_unit_of_measurement=UnitOfDataRate.MEGABITS_PER_SECOND,
-        value_fn=lambda data: data.wireless.polling.ul_capacity,
-    ),
-)
-
-AIROS8_SENSORS: tuple[AirOS8SensorEntityDescription, ...] = (
-    AirOS8SensorEntityDescription(
-        key="wireless_throughput_tx",
-        translation_key="wireless_throughput_tx",
-        native_unit_of_measurement=UnitOfDataRate.KILOBITS_PER_SECOND,
-        device_class=SensorDeviceClass.DATA_RATE,
-        state_class=SensorStateClass.MEASUREMENT,
-        suggested_display_precision=0,
-        suggested_unit_of_measurement=UnitOfDataRate.MEGABITS_PER_SECOND,
-        value_fn=lambda data: data.wireless.throughput.tx,
-    ),
-    AirOS8SensorEntityDescription(
-        key="wireless_throughput_rx",
-        translation_key="wireless_throughput_rx",
-        native_unit_of_measurement=UnitOfDataRate.KILOBITS_PER_SECOND,
-        device_class=SensorDeviceClass.DATA_RATE,
-        state_class=SensorStateClass.MEASUREMENT,
-        suggested_display_precision=0,
-        suggested_unit_of_measurement=UnitOfDataRate.MEGABITS_PER_SECOND,
-        value_fn=lambda data: data.wireless.throughput.rx,
-    ),
 )
 
 
@@ -182,14 +169,7 @@ async def async_setup_entry(
     """Set up the AirOS sensors from a config entry."""
     coordinator = config_entry.runtime_data
 
-    entities = [AirOSSensor(coordinator, description) for description in COMMON_SENSORS]
-
-    if coordinator.device_data["fw_major"] == 8:
-        entities.extend(
-            AirOSSensor(coordinator, description) for description in AIROS8_SENSORS
-        )
-
-    async_add_entities(entities)
+    async_add_entities(AirOSSensor(coordinator, description) for description in SENSORS)
 
 
 class AirOSSensor(AirOSEntity, SensorEntity):

homeassistant/components/airq/config_flow.py

@@ -18,10 +18,6 @@ from homeassistant.helpers.schema_config_entry_flow import (
     SchemaOptionsFlowHandler,
 )
 from homeassistant.helpers.selector import BooleanSelector
-from homeassistant.helpers.service_info.zeroconf import (
-    ATTR_PROPERTIES_ID,
-    ZeroconfServiceInfo,
-)
 
 from .const import CONF_CLIP_NEGATIVE, CONF_RETURN_AVERAGE, DOMAIN
 
@@ -50,9 +46,6 @@ class AirQConfigFlow(ConfigFlow, domain=DOMAIN):
 
     VERSION = 1
 
-    _discovered_host: str
-    _discovered_name: str
-
     async def async_step_user(
         self, user_input: dict[str, Any] | None = None
     ) -> ConfigFlowResult:
@@ -87,7 +80,7 @@ class AirQConfigFlow(ConfigFlow, domain=DOMAIN):
             _LOGGER.debug("Successfully connected to %s", user_input[CONF_IP_ADDRESS])
 
             device_info = await airq.fetch_device_info()
-            await self.async_set_unique_id(device_info["id"], raise_on_progress=False)
+            await self.async_set_unique_id(device_info["id"])
             self._abort_if_unique_id_configured()
 
             _LOGGER.debug("Creating an entry for %s", device_info["name"])
@@ -97,58 +90,6 @@ class AirQConfigFlow(ConfigFlow, domain=DOMAIN):
             step_id="user", data_schema=STEP_USER_DATA_SCHEMA, errors=errors
         )
 
-    async def async_step_zeroconf(
-        self, discovery_info: ZeroconfServiceInfo
-    ) -> ConfigFlowResult:
-        """Handle zeroconf discovery of an air-Q device."""
-        self._discovered_host = discovery_info.host
-        self._discovered_name = discovery_info.properties.get("devicename", "air-Q")
-        device_id = discovery_info.properties.get(ATTR_PROPERTIES_ID)
-
-        if not device_id:
-            return self.async_abort(reason="incomplete_discovery")
-
-        await self.async_set_unique_id(device_id)
-        self._abort_if_unique_id_configured(
-            updates={CONF_IP_ADDRESS: self._discovered_host},
-            reload_on_update=True,
-        )
-
-        self.context["title_placeholders"] = {"name": self._discovered_name}
-
-        return await self.async_step_discovery_confirm()
-
-    async def async_step_discovery_confirm(
-        self, user_input: dict[str, Any] | None = None
-    ) -> ConfigFlowResult:
-        """Handle user confirmation of a discovered air-Q device."""
-        errors: dict[str, str] = {}
-
-        if user_input is not None:
-            session = async_get_clientsession(self.hass)
-            airq = AirQ(self._discovered_host, user_input[CONF_PASSWORD], session)
-            try:
-                await airq.validate()
-            except ClientConnectionError:
-                errors["base"] = "cannot_connect"
-            except InvalidAuth:
-                errors["base"] = "invalid_auth"
-            else:
-                return self.async_create_entry(
-                    title=self._discovered_name,
-                    data={
-                        CONF_IP_ADDRESS: self._discovered_host,
-                        CONF_PASSWORD: user_input[CONF_PASSWORD],
-                    },
-                )
-
-        return self.async_show_form(
-            step_id="discovery_confirm",
-            data_schema=vol.Schema({vol.Required(CONF_PASSWORD): str}),
-            description_placeholders={"name": self._discovered_name},
-            errors=errors,
-        )
-
     @staticmethod
     @callback
     def async_get_options_flow(

homeassistant/components/airq/diagnostics.py

@@ -1,36 +0,0 @@
-"""Diagnostics support for air-Q."""
-
-from __future__ import annotations
-
-from typing import Any
-
-from homeassistant.components.diagnostics import async_redact_data
-from homeassistant.const import CONF_IP_ADDRESS, CONF_PASSWORD, CONF_UNIQUE_ID
-from homeassistant.core import HomeAssistant
-
-from . import AirQConfigEntry
-
-REDACT_CONFIG = {CONF_PASSWORD, CONF_UNIQUE_ID, CONF_IP_ADDRESS, "title"}
-REDACT_DEVICE_INFO = {"identifiers", "name"}
-REDACT_COORDINATOR_DATA = {"DeviceID"}
-
-
-async def async_get_config_entry_diagnostics(
-    hass: HomeAssistant, entry: AirQConfigEntry
-) -> dict[str, Any]:
-    """Return diagnostics for a config entry."""
-    coordinator = entry.runtime_data
-
-    return {
-        "config_entry": async_redact_data(entry.as_dict(), REDACT_CONFIG),
-        "device_info": async_redact_data(
-            dict(coordinator.device_info), REDACT_DEVICE_INFO
-        ),
-        "coordinator_data": async_redact_data(
-            coordinator.data, REDACT_COORDINATOR_DATA
-        ),
-        "options": {
-            "clip_negative": coordinator.clip_negative,
-            "return_average": coordinator.return_average,
-        },
-    }

homeassistant/components/airq/manifest.json

@@ -7,13 +7,5 @@
   "integration_type": "hub",
   "iot_class": "local_polling",
   "loggers": ["aioairq"],
-  "requirements": ["aioairq==0.4.7"],
-  "zeroconf": [
-    {
-      "properties": {
-        "device": "air-q"
-      },
-      "type": "_http._tcp.local."
-    }
-  ]
+  "requirements": ["aioairq==0.4.7"]
 }

homeassistant/components/airq/strings.json

@@ -1,23 +1,14 @@
 {
   "config": {
     "abort": {
-      "already_configured": "[%key:common::config_flow::abort::already_configured_device%]",
-      "incomplete_discovery": "The discovered air-Q device did not provide a device ID. Ensure the firmware is up to date."
+      "already_configured": "[%key:common::config_flow::abort::already_configured_device%]"
     },
     "error": {
       "cannot_connect": "[%key:common::config_flow::error::cannot_connect%]",
       "invalid_auth": "[%key:common::config_flow::error::invalid_auth%]",
       "invalid_input": "[%key:common::config_flow::error::invalid_host%]"
     },
-    "flow_title": "{name}",
     "step": {
-      "discovery_confirm": {
-        "data": {
-          "password": "[%key:common::config_flow::data::password%]"
-        },
-        "description": "Do you want to set up **{name}**?",
-        "title": "Set up air-Q"
-      },
       "user": {
         "data": {
           "ip_address": "[%key:common::config_flow::data::ip%]",

homeassistant/components/airtouch4/climate.py

@@ -117,23 +117,23 @@ class AirtouchAC(CoordinatorEntity, ClimateEntity):
         return super()._handle_coordinator_update()
 
     @property
-    def current_temperature(self) -> int:
+    def current_temperature(self):
         """Return the current temperature."""
         return self._unit.Temperature
 
     @property
-    def fan_mode(self) -> str:
+    def fan_mode(self):
         """Return fan mode of the AC this group belongs to."""
         return AT_TO_HA_FAN_SPEED[self._airtouch.acs[self._ac_number].AcFanSpeed]
 
     @property
-    def fan_modes(self) -> list[str]:
+    def fan_modes(self):
         """Return the list of available fan modes."""
         airtouch_fan_speeds = self._airtouch.GetSupportedFanSpeedsForAc(self._ac_number)
         return [AT_TO_HA_FAN_SPEED[speed] for speed in airtouch_fan_speeds]
 
     @property
-    def hvac_mode(self) -> HVACMode:
+    def hvac_mode(self):
         """Return hvac target hvac state."""
         is_off = self._unit.PowerState == "Off"
         if is_off:
@@ -236,17 +236,17 @@ class AirtouchGroup(CoordinatorEntity, ClimateEntity):
         return self._airtouch.acs[self._unit.BelongsToAc].MaxSetpoint
 
     @property
-    def current_temperature(self) -> int:
+    def current_temperature(self):
         """Return the current temperature."""
         return self._unit.Temperature
 
     @property
-    def target_temperature(self) -> int:
+    def target_temperature(self):
         """Return the temperature we are trying to reach."""
         return self._unit.TargetSetpoint
 
     @property
-    def hvac_mode(self) -> HVACMode:
+    def hvac_mode(self):
         """Return hvac target hvac state."""
         # there are other power states that aren't 'on' but still count as on (eg. 'Turbo')
         is_off = self._unit.PowerState == "Off"
@@ -272,12 +272,12 @@ class AirtouchGroup(CoordinatorEntity, ClimateEntity):
         self.async_write_ha_state()
 
     @property
-    def fan_mode(self) -> str:
+    def fan_mode(self):
         """Return fan mode of the AC this group belongs to."""
         return AT_TO_HA_FAN_SPEED[self._airtouch.acs[self._unit.BelongsToAc].AcFanSpeed]
 
     @property
-    def fan_modes(self) -> list[str]:
+    def fan_modes(self):
         """Return the list of available fan modes."""
         airtouch_fan_speeds = self._airtouch.GetSupportedFanSpeedsByGroup(
             self._group_number

homeassistant/components/airtouch5/manifest.json

@@ -7,5 +7,5 @@
   "integration_type": "hub",
   "iot_class": "local_push",
   "loggers": ["airtouch5py"],
-  "requirements": ["airtouch5py==0.4.0"]
+  "requirements": ["airtouch5py==0.3.0"]
 }

homeassistant/components/airvisual/__init__.py

@@ -7,7 +7,13 @@ from datetime import timedelta
 from math import ceil
 from typing import Any
 
-from pyairvisual.cloud_api import CloudAPI
+from pyairvisual.cloud_api import (
+    CloudAPI,
+    InvalidKeyError,
+    KeyExpiredError,
+    UnauthorizedError,
+)
+from pyairvisual.errors import AirVisualError
 
 from homeassistant.components import automation
 from homeassistant.config_entries import SOURCE_IMPORT, ConfigEntry
@@ -22,12 +28,14 @@ from homeassistant.const import (
     Platform,
 )
 from homeassistant.core import HomeAssistant, callback
+from homeassistant.exceptions import ConfigEntryAuthFailed
 from homeassistant.helpers import (
     aiohttp_client,
     device_registry as dr,
     entity_registry as er,
 )
 from homeassistant.helpers.issue_registry import IssueSeverity, async_create_issue
+from homeassistant.helpers.update_coordinator import DataUpdateCoordinator, UpdateFailed
 
 from .const import (
     CONF_CITY,
@@ -39,7 +47,8 @@ from .const import (
     INTEGRATION_TYPE_NODE_PRO,
     LOGGER,
 )
-from .coordinator import AirVisualConfigEntry, AirVisualDataUpdateCoordinator
+
+type AirVisualConfigEntry = ConfigEntry[DataUpdateCoordinator]
 
 # We use a raw string for the airvisual_pro domain (instead of importing the actual
 # constant) so that we can avoid listing it as a dependency:
@@ -76,8 +85,8 @@ def async_get_cloud_api_update_interval(
 @callback
 def async_get_cloud_coordinators_by_api_key(
     hass: HomeAssistant, api_key: str
-) -> list[AirVisualDataUpdateCoordinator]:
-    """Get all AirVisualDataUpdateCoordinator objects related to a particular API key."""
+) -> list[DataUpdateCoordinator]:
+    """Get all DataUpdateCoordinator objects related to a particular API key."""
     return [
         entry.runtime_data
         for entry in hass.config_entries.async_entries(DOMAIN)
@@ -171,11 +180,38 @@ async def async_setup_entry(hass: HomeAssistant, entry: AirVisualConfigEntry) ->
     websession = aiohttp_client.async_get_clientsession(hass)
     cloud_api = CloudAPI(entry.data[CONF_API_KEY], session=websession)
 
-    coordinator = AirVisualDataUpdateCoordinator(
+    async def async_update_data() -> dict[str, Any]:
+        """Get new data from the API."""
+        if CONF_CITY in entry.data:
+            api_coro = cloud_api.air_quality.city(
+                entry.data[CONF_CITY],
+                entry.data[CONF_STATE],
+                entry.data[CONF_COUNTRY],
+            )
+        else:
+            api_coro = cloud_api.air_quality.nearest_city(
+                entry.data[CONF_LATITUDE],
+                entry.data[CONF_LONGITUDE],
+            )
+
+        try:
+            return await api_coro
+        except (InvalidKeyError, KeyExpiredError, UnauthorizedError) as ex:
+            raise ConfigEntryAuthFailed from ex
+        except AirVisualError as err:
+            raise UpdateFailed(f"Error while retrieving data: {err}") from err
+
+    coordinator = DataUpdateCoordinator(
         hass,
-        entry,
-        cloud_api,
+        LOGGER,
+        config_entry=entry,
         name=async_get_geography_id(entry.data),
+        # We give a placeholder update interval in order to create the coordinator;
+        # then, below, we use the coordinator's presence (along with any other
+        # coordinators using the same API key) to calculate an actual, leveled
+        # update interval:
+        update_interval=timedelta(minutes=5),
+        update_method=async_update_data,
     )
 
     entry.async_on_unload(entry.add_update_listener(async_reload_entry))

homeassistant/components/airvisual/coordinator.py

@@ -1,72 +0,0 @@
-"""Define an AirVisual data coordinator."""
-
-from __future__ import annotations
-
-from datetime import timedelta
-from typing import Any
-
-from pyairvisual.cloud_api import (
-    CloudAPI,
-    InvalidKeyError,
-    KeyExpiredError,
-    UnauthorizedError,
-)
-from pyairvisual.errors import AirVisualError
-
-from homeassistant.config_entries import ConfigEntry
-from homeassistant.const import CONF_COUNTRY, CONF_LATITUDE, CONF_LONGITUDE, CONF_STATE
-from homeassistant.core import HomeAssistant
-from homeassistant.exceptions import ConfigEntryAuthFailed
-from homeassistant.helpers.update_coordinator import DataUpdateCoordinator, UpdateFailed
-
-from .const import CONF_CITY, LOGGER
-
-type AirVisualConfigEntry = ConfigEntry[AirVisualDataUpdateCoordinator]
-
-
-class AirVisualDataUpdateCoordinator(DataUpdateCoordinator[dict[str, Any]]):
-    """Class to manage fetching AirVisual data."""
-
-    config_entry: AirVisualConfigEntry
-
-    def __init__(
-        self,
-        hass: HomeAssistant,
-        entry: AirVisualConfigEntry,
-        cloud_api: CloudAPI,
-        name: str,
-    ) -> None:
-        """Initialize the coordinator."""
-        self._cloud_api = cloud_api
-        super().__init__(
-            hass,
-            LOGGER,
-            config_entry=entry,
-            name=name,
-            # We give a placeholder update interval in order to create the coordinator;
-            # then, in async_setup_entry, we use the coordinator's presence (along with
-            # any other coordinators using the same API key) to calculate an actual,
-            # leveled update interval:
-            update_interval=timedelta(minutes=5),
-        )
-
-    async def _async_update_data(self) -> dict[str, Any]:
-        """Get new data from the API."""
-        if CONF_CITY in self.config_entry.data:
-            api_coro = self._cloud_api.air_quality.city(
-                self.config_entry.data[CONF_CITY],
-                self.config_entry.data[CONF_STATE],
-                self.config_entry.data[CONF_COUNTRY],
-            )
-        else:
-            api_coro = self._cloud_api.air_quality.nearest_city(
-                self.config_entry.data[CONF_LATITUDE],
-                self.config_entry.data[CONF_LONGITUDE],
-            )
-
-        try:
-            return await api_coro
-        except (InvalidKeyError, KeyExpiredError, UnauthorizedError) as ex:
-            raise ConfigEntryAuthFailed from ex
-        except AirVisualError as err:
-            raise UpdateFailed(f"Error while retrieving data: {err}") from err

homeassistant/components/airvisual/diagnostics.py

@@ -15,8 +15,8 @@ from homeassistant.const import (
 )
 from homeassistant.core import HomeAssistant
 
+from . import AirVisualConfigEntry
 from .const import CONF_CITY
-from .coordinator import AirVisualConfigEntry
 
 CONF_COORDINATES = "coordinates"
 CONF_TITLE = "title"

homeassistant/components/airvisual/entity.py

@@ -2,25 +2,29 @@
 
 from __future__ import annotations
 
+from homeassistant.config_entries import ConfigEntry
 from homeassistant.core import callback
 from homeassistant.helpers.entity import EntityDescription
-from homeassistant.helpers.update_coordinator import CoordinatorEntity
-
-from .coordinator import AirVisualDataUpdateCoordinator
+from homeassistant.helpers.update_coordinator import (
+    CoordinatorEntity,
+    DataUpdateCoordinator,
+)
 
 
-class AirVisualEntity(CoordinatorEntity[AirVisualDataUpdateCoordinator]):
+class AirVisualEntity(CoordinatorEntity):
     """Define a generic AirVisual entity."""
 
     def __init__(
         self,
-        coordinator: AirVisualDataUpdateCoordinator,
+        coordinator: DataUpdateCoordinator,
+        entry: ConfigEntry,
         description: EntityDescription,
     ) -> None:
         """Initialize."""
         super().__init__(coordinator)
 
         self._attr_extra_state_attributes = {}
+        self._entry = entry
         self.entity_description = description
 
     async def async_added_to_hass(self) -> None:

homeassistant/components/airvisual/sensor.py

@@ -8,6 +8,7 @@ from homeassistant.components.sensor import (
     SensorEntityDescription,
     SensorStateClass,
 )
+from homeassistant.config_entries import ConfigEntry
 from homeassistant.const import (
     ATTR_LATITUDE,
     ATTR_LONGITUDE,
@@ -23,9 +24,10 @@ from homeassistant.const import (
 )
 from homeassistant.core import HomeAssistant, callback
 from homeassistant.helpers.entity_platform import AddConfigEntryEntitiesCallback
+from homeassistant.helpers.update_coordinator import DataUpdateCoordinator
 
+from . import AirVisualConfigEntry
 from .const import CONF_CITY
-from .coordinator import AirVisualConfigEntry, AirVisualDataUpdateCoordinator
 from .entity import AirVisualEntity
 
 ATTR_CITY = "city"
@@ -111,7 +113,7 @@ async def async_setup_entry(
     """Set up AirVisual sensors based on a config entry."""
     coordinator = entry.runtime_data
     async_add_entities(
-        AirVisualGeographySensor(coordinator, description, locale)
+        AirVisualGeographySensor(coordinator, entry, description, locale)
         for locale in GEOGRAPHY_SENSOR_LOCALES
         for description in GEOGRAPHY_SENSOR_DESCRIPTIONS
     )
@@ -122,14 +124,14 @@ class AirVisualGeographySensor(AirVisualEntity, SensorEntity):
 
     def __init__(
         self,
-        coordinator: AirVisualDataUpdateCoordinator,
+        coordinator: DataUpdateCoordinator,
+        entry: ConfigEntry,
         description: SensorEntityDescription,
         locale: str,
     ) -> None:
         """Initialize."""
-        super().__init__(coordinator, description)
+        super().__init__(coordinator, entry, description)
 
-        entry = coordinator.config_entry
         self._attr_extra_state_attributes.update(
             {
                 ATTR_CITY: entry.data.get(CONF_CITY),
@@ -180,16 +182,16 @@ class AirVisualGeographySensor(AirVisualEntity, SensorEntity):
         #
         # We use any coordinates in the config entry and, in the case of a geography by
         # name, we fall back to the latitude longitude provided in the coordinator data:
-        latitude = self.coordinator.config_entry.data.get(
+        latitude = self._entry.data.get(
             CONF_LATITUDE,
             self.coordinator.data["location"]["coordinates"][1],
         )
-        longitude = self.coordinator.config_entry.data.get(
+        longitude = self._entry.data.get(
             CONF_LONGITUDE,
             self.coordinator.data["location"]["coordinates"][0],
         )
 
-        if self.coordinator.config_entry.options[CONF_SHOW_ON_MAP]:
+        if self._entry.options[CONF_SHOW_ON_MAP]:
             self._attr_extra_state_attributes[ATTR_LATITUDE] = latitude
             self._attr_extra_state_attributes[ATTR_LONGITUDE] = longitude
             self._attr_extra_state_attributes.pop("lati", None)

homeassistant/components/airvisual_pro/__init__.py

@@ -4,9 +4,18 @@ from __future__ import annotations
 
 import asyncio
 from contextlib import suppress
+from dataclasses import dataclass
+from datetime import timedelta
+from typing import Any
 
-from pyairvisual.node import NodeProError, NodeSamba
+from pyairvisual.node import (
+    InvalidAuthenticationError,
+    NodeConnectionError,
+    NodeProError,
+    NodeSamba,
+)
 
+from homeassistant.config_entries import ConfigEntry
 from homeassistant.const import (
     CONF_IP_ADDRESS,
     CONF_PASSWORD,
@@ -14,16 +23,25 @@ from homeassistant.const import (
     Platform,
 )
 from homeassistant.core import Event, HomeAssistant
-from homeassistant.exceptions import ConfigEntryNotReady
+from homeassistant.exceptions import ConfigEntryAuthFailed, ConfigEntryNotReady
+from homeassistant.helpers.update_coordinator import DataUpdateCoordinator, UpdateFailed
 
-from .coordinator import (
-    AirVisualProConfigEntry,
-    AirVisualProCoordinator,
-    AirVisualProData,
-)
+from .const import LOGGER
 
 PLATFORMS = [Platform.SENSOR]
 
+UPDATE_INTERVAL = timedelta(minutes=1)
+
+type AirVisualProConfigEntry = ConfigEntry[AirVisualProData]
+
+
+@dataclass
+class AirVisualProData:
+    """Define a data class."""
+
+    coordinator: DataUpdateCoordinator
+    node: NodeSamba
+
 
 async def async_setup_entry(
     hass: HomeAssistant, entry: AirVisualProConfigEntry
@@ -36,15 +54,48 @@ async def async_setup_entry(
     except NodeProError as err:
         raise ConfigEntryNotReady from err
 
-    coordinator = AirVisualProCoordinator(hass, entry, node)
+    reload_task: asyncio.Task | None = None
+
+    async def async_get_data() -> dict[str, Any]:
+        """Get data from the device."""
+        try:
+            data = await node.async_get_latest_measurements()
+            data["history"] = {}
+            if data["settings"].get("follow_mode") == "device":
+                history = await node.async_get_history(include_trends=False)
+                data["history"] = history.get("measurements", [])[-1]
+        except InvalidAuthenticationError as err:
+            raise ConfigEntryAuthFailed("Invalid Samba password") from err
+        except NodeConnectionError as err:
+            nonlocal reload_task
+            if not reload_task:
+                reload_task = hass.async_create_task(
+                    hass.config_entries.async_reload(entry.entry_id)
+                )
+            raise UpdateFailed(f"Connection to Pro unit lost: {err}") from err
+        except NodeProError as err:
+            raise UpdateFailed(f"Error while retrieving data: {err}") from err
+
+        return data
+
+    coordinator = DataUpdateCoordinator(
+        hass,
+        LOGGER,
+        config_entry=entry,
+        name="Node/Pro data",
+        update_interval=UPDATE_INTERVAL,
+        update_method=async_get_data,
+    )
+
     await coordinator.async_config_entry_first_refresh()
     entry.runtime_data = AirVisualProData(coordinator=coordinator, node=node)
 
     async def async_shutdown(_: Event) -> None:
         """Define an event handler to disconnect from the websocket."""
-        if coordinator.reload_task:
+        nonlocal reload_task
+        if reload_task:
             with suppress(asyncio.CancelledError):
-                coordinator.reload_task.cancel()
+                reload_task.cancel()
         await node.async_disconnect()
 
     entry.async_on_unload(

homeassistant/components/airvisual_pro/coordinator.py

@@ -1,79 +0,0 @@
-"""DataUpdateCoordinator for the AirVisual Pro integration."""
-
-from __future__ import annotations
-
-import asyncio
-from dataclasses import dataclass
-from datetime import timedelta
-from typing import Any
-
-from pyairvisual.node import (
-    InvalidAuthenticationError,
-    NodeConnectionError,
-    NodeProError,
-    NodeSamba,
-)
-
-from homeassistant.config_entries import ConfigEntry
-from homeassistant.core import HomeAssistant
-from homeassistant.exceptions import ConfigEntryAuthFailed
-from homeassistant.helpers.update_coordinator import DataUpdateCoordinator, UpdateFailed
-
-from .const import LOGGER
-
-UPDATE_INTERVAL = timedelta(minutes=1)
-
-
-@dataclass
-class AirVisualProData:
-    """Define a data class."""
-
-    coordinator: AirVisualProCoordinator
-    node: NodeSamba
-
-
-type AirVisualProConfigEntry = ConfigEntry[AirVisualProData]
-
-
-class AirVisualProCoordinator(DataUpdateCoordinator[dict[str, Any]]):
-    """Coordinator for AirVisual Pro data."""
-
-    config_entry: AirVisualProConfigEntry
-
-    def __init__(
-        self,
-        hass: HomeAssistant,
-        config_entry: AirVisualProConfigEntry,
-        node: NodeSamba,
-    ) -> None:
-        """Initialize."""
-        super().__init__(
-            hass,
-            LOGGER,
-            config_entry=config_entry,
-            name="Node/Pro data",
-            update_interval=UPDATE_INTERVAL,
-        )
-        self._node = node
-        self.reload_task: asyncio.Task[bool] | None = None
-
-    async def _async_update_data(self) -> dict[str, Any]:
-        """Get data from the device."""
-        try:
-            data = await self._node.async_get_latest_measurements()
-            data["history"] = {}
-            if data["settings"].get("follow_mode") == "device":
-                history = await self._node.async_get_history(include_trends=False)
-                data["history"] = history.get("measurements", [])[-1]
-        except InvalidAuthenticationError as err:
-            raise ConfigEntryAuthFailed("Invalid Samba password") from err
-        except NodeConnectionError as err:
-            if self.reload_task is None:
-                self.reload_task = self.hass.async_create_task(
-                    self.hass.config_entries.async_reload(self.config_entry.entry_id)
-                )
-            raise UpdateFailed(f"Connection to Pro unit lost: {err}") from err
-        except NodeProError as err:
-            raise UpdateFailed(f"Error while retrieving data: {err}") from err
-
-        return data

homeassistant/components/airvisual_pro/diagnostics.py

@@ -8,7 +8,7 @@ from homeassistant.components.diagnostics import async_redact_data
 from homeassistant.const import CONF_PASSWORD
 from homeassistant.core import HomeAssistant
 
-from .coordinator import AirVisualProConfigEntry
+from . import AirVisualProConfigEntry
 
 CONF_MAC_ADDRESS = "mac_address"
 CONF_SERIAL_NUMBER = "serial_number"

homeassistant/components/airvisual_pro/entity.py

@@ -4,17 +4,19 @@ from __future__ import annotations
 
 from homeassistant.helpers.device_registry import DeviceInfo
 from homeassistant.helpers.entity import EntityDescription
-from homeassistant.helpers.update_coordinator import CoordinatorEntity
+from homeassistant.helpers.update_coordinator import (
+    CoordinatorEntity,
+    DataUpdateCoordinator,
+)
 
 from .const import DOMAIN
-from .coordinator import AirVisualProCoordinator
 
 
-class AirVisualProEntity(CoordinatorEntity[AirVisualProCoordinator]):
+class AirVisualProEntity(CoordinatorEntity):
     """Define a generic AirVisual Pro entity."""
 
     def __init__(
-        self, coordinator: AirVisualProCoordinator, description: EntityDescription
+        self, coordinator: DataUpdateCoordinator, description: EntityDescription
     ) -> None:
         """Initialize."""
         super().__init__(coordinator)

homeassistant/components/airvisual_pro/sensor.py

@@ -22,7 +22,7 @@ from homeassistant.const import (
 from homeassistant.core import HomeAssistant, callback
 from homeassistant.helpers.entity_platform import AddConfigEntryEntitiesCallback
 
-from .coordinator import AirVisualProConfigEntry
+from . import AirVisualProConfigEntry
 from .entity import AirVisualProEntity
 
 

homeassistant/components/aladdin_connect/__init__.py

@@ -46,10 +46,19 @@ async def async_setup_entry(
         api.AsyncConfigEntryAuth(aiohttp_client.async_get_clientsession(hass), session)
     )
 
-    coordinator = AladdinConnectCoordinator(hass, entry, client)
-    await coordinator.async_config_entry_first_refresh()
+    try:
+        doors = await client.get_doors()
+    except aiohttp.ClientResponseError as err:
+        if 400 <= err.status < 500:
+            raise ConfigEntryAuthFailed(err) from err
+        raise ConfigEntryNotReady from err
+    except aiohttp.ClientError as err:
+        raise ConfigEntryNotReady from err
 
-    entry.runtime_data = coordinator
+    entry.runtime_data = {
+        door.unique_id: AladdinConnectCoordinator(hass, entry, client, door)
+        for door in doors
+    }
 
     await hass.config_entries.async_forward_entry_setups(entry, PLATFORMS)
 
@@ -91,7 +100,7 @@ def remove_stale_devices(
     device_entries = dr.async_entries_for_config_entry(
         device_registry, config_entry.entry_id
     )
-    all_device_ids = set(config_entry.runtime_data.data)
+    all_device_ids = set(config_entry.runtime_data)
 
     for device_entry in device_entries:
         device_id: str | None = None

homeassistant/components/aladdin_connect/coordinator.py

@@ -5,30 +5,27 @@ from __future__ import annotations
 from datetime import timedelta
 import logging
 
-import aiohttp
 from genie_partner_sdk.client import AladdinConnectClient
 from genie_partner_sdk.model import GarageDoor
 
 from homeassistant.config_entries import ConfigEntry
 from homeassistant.core import HomeAssistant
-from homeassistant.exceptions import ConfigEntryAuthFailed
-from homeassistant.helpers.update_coordinator import DataUpdateCoordinator, UpdateFailed
+from homeassistant.helpers.update_coordinator import DataUpdateCoordinator
 
 _LOGGER = logging.getLogger(__name__)
-type AladdinConnectConfigEntry = ConfigEntry[AladdinConnectCoordinator]
+type AladdinConnectConfigEntry = ConfigEntry[dict[str, AladdinConnectCoordinator]]
 SCAN_INTERVAL = timedelta(seconds=15)
 
 
-class AladdinConnectCoordinator(DataUpdateCoordinator[dict[str, GarageDoor]]):
+class AladdinConnectCoordinator(DataUpdateCoordinator[GarageDoor]):
     """Coordinator for Aladdin Connect integration."""
 
-    config_entry: AladdinConnectConfigEntry
-
     def __init__(
         self,
         hass: HomeAssistant,
         entry: AladdinConnectConfigEntry,
         client: AladdinConnectClient,
+        garage_door: GarageDoor,
     ) -> None:
         """Initialize the coordinator."""
         super().__init__(
@@ -39,16 +36,15 @@ class AladdinConnectCoordinator(DataUpdateCoordinator[dict[str, GarageDoor]]):
             update_interval=SCAN_INTERVAL,
         )
         self.client = client
+        self.data = garage_door
 
-    async def _async_update_data(self) -> dict[str, GarageDoor]:
+    async def _async_update_data(self) -> GarageDoor:
         """Fetch data from the Aladdin Connect API."""
-        try:
-            doors = await self.client.get_doors()
-        except aiohttp.ClientResponseError as err:
-            if 400 <= err.status < 500:
-                raise ConfigEntryAuthFailed(err) from err
-            raise UpdateFailed(f"Error communicating with API: {err}") from err
-        except aiohttp.ClientError as err:
-            raise UpdateFailed(f"Error communicating with API: {err}") from err
-
-        return {door.unique_id: door for door in doors}
+        await self.client.update_door(self.data.device_id, self.data.door_number)
+        self.data.status = self.client.get_door_status(
+            self.data.device_id, self.data.door_number
+        )
+        self.data.battery_level = self.client.get_battery_status(
+            self.data.device_id, self.data.door_number
+        )
+        return self.data

homeassistant/components/aladdin_connect/cover.py

@@ -4,19 +4,14 @@ from __future__ import annotations
 
 from typing import Any
 
-import aiohttp
-
 from homeassistant.components.cover import CoverDeviceClass, CoverEntity
-from homeassistant.core import HomeAssistant, callback
-from homeassistant.exceptions import HomeAssistantError
+from homeassistant.core import HomeAssistant
 from homeassistant.helpers.entity_platform import AddConfigEntryEntitiesCallback
 
-from .const import DOMAIN, SUPPORTED_FEATURES
+from .const import SUPPORTED_FEATURES
 from .coordinator import AladdinConnectConfigEntry, AladdinConnectCoordinator
 from .entity import AladdinConnectEntity
 
-PARALLEL_UPDATES = 1
-
 
 async def async_setup_entry(
     hass: HomeAssistant,
@@ -24,22 +19,11 @@ async def async_setup_entry(
     async_add_entities: AddConfigEntryEntitiesCallback,
 ) -> None:
     """Set up the cover platform."""
-    coordinator = entry.runtime_data
-    known_devices: set[str] = set()
+    coordinators = entry.runtime_data
 
-    @callback
-    def _async_add_new_devices() -> None:
-        """Detect and add entities for new doors."""
-        current_devices = set(coordinator.data)
-        new_devices = current_devices - known_devices
-        if new_devices:
-            known_devices.update(new_devices)
-            async_add_entities(
-                AladdinCoverEntity(coordinator, door_id) for door_id in new_devices
-            )
-
-    _async_add_new_devices()
-    entry.async_on_unload(coordinator.async_add_listener(_async_add_new_devices))
+    async_add_entities(
+        AladdinCoverEntity(coordinator) for coordinator in coordinators.values()
+    )
 
 
 class AladdinCoverEntity(AladdinConnectEntity, CoverEntity):
@@ -49,44 +33,32 @@ class AladdinCoverEntity(AladdinConnectEntity, CoverEntity):
     _attr_supported_features = SUPPORTED_FEATURES
     _attr_name = None
 
-    def __init__(self, coordinator: AladdinConnectCoordinator, door_id: str) -> None:
+    def __init__(self, coordinator: AladdinConnectCoordinator) -> None:
         """Initialize the Aladdin Connect cover."""
-        super().__init__(coordinator, door_id)
-        self._attr_unique_id = door_id
+        super().__init__(coordinator)
+        self._attr_unique_id = coordinator.data.unique_id
 
     async def async_open_cover(self, **kwargs: Any) -> None:
         """Issue open command to cover."""
-        try:
-            await self.client.open_door(self._device_id, self._number)
-        except aiohttp.ClientError as err:
-            raise HomeAssistantError(
-                translation_domain=DOMAIN,
-                translation_key="open_door_failed",
-            ) from err
+        await self.client.open_door(self._device_id, self._number)
 
     async def async_close_cover(self, **kwargs: Any) -> None:
         """Issue close command to cover."""
-        try:
-            await self.client.close_door(self._device_id, self._number)
-        except aiohttp.ClientError as err:
-            raise HomeAssistantError(
-                translation_domain=DOMAIN,
-                translation_key="close_door_failed",
-            ) from err
+        await self.client.close_door(self._device_id, self._number)
 
     @property
     def is_closed(self) -> bool | None:
         """Update is closed attribute."""
-        if (status := self.door.status) is None:
+        if (status := self.coordinator.data.status) is None:
             return None
         return status == "closed"
 
     @property
     def is_closing(self) -> bool | None:
         """Update is closing attribute."""
-        return self.door.status == "closing"
+        return self.coordinator.data.status == "closing"
 
     @property
     def is_opening(self) -> bool | None:
         """Update is opening attribute."""
-        return self.door.status == "opening"
+        return self.coordinator.data.status == "opening"

homeassistant/components/aladdin_connect/diagnostics.py

@@ -1,32 +0,0 @@
-"""Diagnostics support for Aladdin Connect."""
-
-from __future__ import annotations
-
-from typing import Any
-
-from homeassistant.components.diagnostics import async_redact_data
-from homeassistant.core import HomeAssistant
-
-from .coordinator import AladdinConnectConfigEntry
-
-TO_REDACT = {"access_token", "refresh_token"}
-
-
-async def async_get_config_entry_diagnostics(
-    hass: HomeAssistant, config_entry: AladdinConnectConfigEntry
-) -> dict[str, Any]:
-    """Return diagnostics for a config entry."""
-    return {
-        "config_entry": async_redact_data(config_entry.as_dict(), TO_REDACT),
-        "doors": {
-            uid: {
-                "device_id": door.device_id,
-                "door_number": door.door_number,
-                "name": door.name,
-                "status": door.status,
-                "link_status": door.link_status,
-                "battery_level": door.battery_level,
-            }
-            for uid, door in config_entry.runtime_data.data.items()
-        },
-    }

homeassistant/components/aladdin_connect/entity.py

@@ -1,7 +1,6 @@
 """Base class for Aladdin Connect entities."""
 
 from genie_partner_sdk.client import AladdinConnectClient
-from genie_partner_sdk.model import GarageDoor
 
 from homeassistant.helpers.device_registry import DeviceInfo
 from homeassistant.helpers.update_coordinator import CoordinatorEntity
@@ -15,28 +14,17 @@ class AladdinConnectEntity(CoordinatorEntity[AladdinConnectCoordinator]):
 
     _attr_has_entity_name = True
 
-    def __init__(self, coordinator: AladdinConnectCoordinator, door_id: str) -> None:
+    def __init__(self, coordinator: AladdinConnectCoordinator) -> None:
         """Initialize Aladdin Connect entity."""
         super().__init__(coordinator)
-        self._door_id = door_id
-        door = self.door
+        device = coordinator.data
         self._attr_device_info = DeviceInfo(
-            identifiers={(DOMAIN, door.unique_id)},
+            identifiers={(DOMAIN, device.unique_id)},
             manufacturer="Aladdin Connect",
-            name=door.name,
+            name=device.name,
         )
-        self._device_id = door.device_id
-        self._number = door.door_number
-
-    @property
-    def available(self) -> bool:
-        """Return True if entity is available."""
-        return super().available and self._door_id in self.coordinator.data
-
-    @property
-    def door(self) -> GarageDoor:
-        """Return the garage door data."""
-        return self.coordinator.data[self._door_id]
+        self._device_id = device.device_id
+        self._number = device.door_number
 
     @property
     def client(self) -> AladdinConnectClient:

homeassistant/components/aladdin_connect/quality_scale.yaml

@@ -26,26 +26,24 @@ rules:
   unique-config-entry: done
 
   # Silver
-  action-exceptions: done
+  action-exceptions: todo
   config-entry-unloading: done
   docs-configuration-parameters:
     status: exempt
     comment: Integration does not have an options flow.
   docs-installation-parameters: done
-  entity-unavailable:
-    status: done
-    comment: Handled by the coordinator.
+  entity-unavailable: todo
   integration-owner: done
-  log-when-unavailable:
-    status: done
-    comment: Handled by the coordinator.
-  parallel-updates: done
+  log-when-unavailable: todo
+  parallel-updates: todo
   reauthentication-flow: done
-  test-coverage: done
+  test-coverage:
+    status: todo
+    comment: Platform tests for cover and sensor need to be implemented to reach 95% coverage.
 
   # Gold
   devices: done
-  diagnostics: done
+  diagnostics: todo
   discovery: done
   discovery-update-info:
     status: exempt
@@ -57,7 +55,7 @@ rules:
   docs-supported-functions: done
   docs-troubleshooting: done
   docs-use-cases: done
-  dynamic-devices: done
+  dynamic-devices: todo
   entity-category: done
   entity-device-class: done
   entity-disabled-by-default: done
@@ -66,7 +64,9 @@ rules:
   icon-translations: todo
   reconfiguration-flow: todo
   repair-issues: todo
-  stale-devices: done
+  stale-devices:
+    status: todo
+    comment: We can automatically remove removed devices
 
   # Platinum
   async-dependency: todo

homeassistant/components/aladdin_connect/sensor.py

@@ -14,14 +14,12 @@ from homeassistant.components.sensor import (
     SensorStateClass,
 )
 from homeassistant.const import PERCENTAGE, EntityCategory
-from homeassistant.core import HomeAssistant, callback
+from homeassistant.core import HomeAssistant
 from homeassistant.helpers.entity_platform import AddConfigEntryEntitiesCallback
 
 from .coordinator import AladdinConnectConfigEntry, AladdinConnectCoordinator
 from .entity import AladdinConnectEntity
 
-PARALLEL_UPDATES = 0
-
 
 @dataclass(frozen=True, kw_only=True)
 class AladdinConnectSensorEntityDescription(SensorEntityDescription):
@@ -49,24 +47,13 @@ async def async_setup_entry(
     async_add_entities: AddConfigEntryEntitiesCallback,
 ) -> None:
     """Set up Aladdin Connect sensor devices."""
-    coordinator = entry.runtime_data
-    known_devices: set[str] = set()
+    coordinators = entry.runtime_data
 
-    @callback
-    def _async_add_new_devices() -> None:
-        """Detect and add entities for new doors."""
-        current_devices = set(coordinator.data)
-        new_devices = current_devices - known_devices
-        if new_devices:
-            known_devices.update(new_devices)
-            async_add_entities(
-                AladdinConnectSensor(coordinator, door_id, description)
-                for door_id in new_devices
-                for description in SENSOR_TYPES
-            )
-
-    _async_add_new_devices()
-    entry.async_on_unload(coordinator.async_add_listener(_async_add_new_devices))
+    async_add_entities(
+        AladdinConnectSensor(coordinator, description)
+        for coordinator in coordinators.values()
+        for description in SENSOR_TYPES
+    )
 
 
 class AladdinConnectSensor(AladdinConnectEntity, SensorEntity):
@@ -77,15 +64,14 @@ class AladdinConnectSensor(AladdinConnectEntity, SensorEntity):
     def __init__(
         self,
         coordinator: AladdinConnectCoordinator,
-        door_id: str,
         entity_description: AladdinConnectSensorEntityDescription,
     ) -> None:
         """Initialize the Aladdin Connect sensor."""
-        super().__init__(coordinator, door_id)
+        super().__init__(coordinator)
         self.entity_description = entity_description
-        self._attr_unique_id = f"{door_id}-{entity_description.key}"
+        self._attr_unique_id = f"{coordinator.data.unique_id}-{entity_description.key}"
 
     @property
     def native_value(self) -> float | None:
         """Return the state of the sensor."""
-        return self.entity_description.value_fn(self.door)
+        return self.entity_description.value_fn(self.coordinator.data)

homeassistant/components/aladdin_connect/strings.json

@@ -32,13 +32,5 @@
         "title": "[%key:common::config_flow::title::reauth%]"
       }
     }
-  },
-  "exceptions": {
-    "close_door_failed": {
-      "message": "Failed to close the garage door"
-    },
-    "open_door_failed": {
-      "message": "Failed to open the garage door"
-    }
   }
 }

homeassistant/components/alarm_control_panel/condition.py

@@ -2,7 +2,6 @@
 
 from homeassistant.core import HomeAssistant
 from homeassistant.exceptions import HomeAssistantError
-from homeassistant.helpers.automation import DomainSpec
 from homeassistant.helpers.condition import (
     Condition,
     EntityStateConditionBase,
@@ -44,7 +43,7 @@ def make_entity_state_required_features_condition(
     class CustomCondition(EntityStateRequiredFeaturesCondition):
         """Condition for entity state changes."""
 
-        _domain_specs = {domain: DomainSpec()}
+        _domain = domain
         _states = {to_state}
         _required_features = required_features
 

homeassistant/components/alarm_control_panel/strings.json

@@ -173,7 +173,7 @@
           "name": "[%key:component::alarm_control_panel::services::alarm_disarm::fields::code::name%]"
         }
       },
-      "name": "Arm alarm away"
+      "name": "Arm away"
     },
     "alarm_arm_custom_bypass": {
       "description": "Arms an alarm while allowing to bypass a custom area.",
@@ -183,7 +183,7 @@
           "name": "[%key:component::alarm_control_panel::services::alarm_disarm::fields::code::name%]"
         }
       },
-      "name": "Arm alarm with custom bypass"
+      "name": "Arm with custom bypass"
     },
     "alarm_arm_home": {
       "description": "Arms an alarm in the home mode.",
@@ -193,7 +193,7 @@
           "name": "[%key:component::alarm_control_panel::services::alarm_disarm::fields::code::name%]"
         }
       },
-      "name": "Arm alarm home"
+      "name": "Arm home"
     },
     "alarm_arm_night": {
       "description": "Arms an alarm in the night mode.",
@@ -203,7 +203,7 @@
           "name": "[%key:component::alarm_control_panel::services::alarm_disarm::fields::code::name%]"
         }
       },
-      "name": "Arm alarm night"
+      "name": "Arm night"
     },
     "alarm_arm_vacation": {
       "description": "Arms an alarm in the vacation mode.",
@@ -213,7 +213,7 @@
           "name": "[%key:component::alarm_control_panel::services::alarm_disarm::fields::code::name%]"
         }
       },
-      "name": "Arm alarm vacation"
+      "name": "Arm vacation"
     },
     "alarm_disarm": {
       "description": "Disarms an alarm.",
@@ -223,7 +223,7 @@
           "name": "Code"
         }
       },
-      "name": "Disarm alarm"
+      "name": "Disarm"
     },
     "alarm_trigger": {
       "description": "Triggers an alarm manually.",
@@ -233,7 +233,7 @@
           "name": "[%key:component::alarm_control_panel::services::alarm_disarm::fields::code::name%]"
         }
       },
-      "name": "Trigger alarm"
+      "name": "Trigger"
     }
   },
   "title": "Alarm control panel",

homeassistant/components/alarm_control_panel/trigger.py

@@ -2,7 +2,6 @@
 
 from homeassistant.core import HomeAssistant
 from homeassistant.exceptions import HomeAssistantError
-from homeassistant.helpers.automation import DomainSpec
 from homeassistant.helpers.entity import get_supported_features
 from homeassistant.helpers.trigger import (
     EntityTargetStateTriggerBase,
@@ -45,7 +44,7 @@ def make_entity_state_trigger_required_features(
     class CustomTrigger(EntityStateTriggerRequiredFeatures):
         """Trigger for entity state changes."""
 
-        _domain_specs = {domain: DomainSpec()}
+        _domain = domain
         _to_states = {to_state}
         _required_features = required_features
 

homeassistant/components/alarmdecoder/services.py

@@ -13,6 +13,9 @@ from homeassistant.helpers import config_validation as cv, service
 
 from .const import DOMAIN
 
+SERVICE_ALARM_TOGGLE_CHIME = "alarm_toggle_chime"
+
+SERVICE_ALARM_KEYPRESS = "alarm_keypress"
 ATTR_KEYPRESS = "keypress"
 
 
@@ -23,7 +26,7 @@ def async_setup_services(hass: HomeAssistant) -> None:
     service.async_register_platform_entity_service(
         hass,
         DOMAIN,
-        "alarm_toggle_chime",
+        SERVICE_ALARM_TOGGLE_CHIME,
         entity_domain=ALARM_CONTROL_PANEL_DOMAIN,
         schema={
             vol.Required(ATTR_CODE): cv.string,
@@ -34,7 +37,7 @@ def async_setup_services(hass: HomeAssistant) -> None:
     service.async_register_platform_entity_service(
         hass,
         DOMAIN,
-        "alarm_keypress",
+        SERVICE_ALARM_KEYPRESS,
         entity_domain=ALARM_CONTROL_PANEL_DOMAIN,
         schema={
             vol.Required(ATTR_KEYPRESS): cv.string,

homeassistant/components/alexa_devices/entity.py

@@ -1,5 +1,6 @@
 """Defines a base Alexa Devices entity."""
 
+from aioamazondevices.const.devices import SPEAKER_GROUP_MODEL
 from aioamazondevices.structures import AmazonDevice
 
 from homeassistant.helpers.device_registry import DeviceInfo
@@ -24,15 +25,19 @@ class AmazonEntity(CoordinatorEntity[AmazonDevicesCoordinator]):
         """Initialize the entity."""
         super().__init__(coordinator)
         self._serial_num = serial_num
+        model_details = coordinator.api.get_model_details(self.device) or {}
+        model = model_details.get("model")
         self._attr_device_info = DeviceInfo(
             identifiers={(DOMAIN, serial_num)},
             name=self.device.account_name,
-            model=self.device.model,
+            model=model,
             model_id=self.device.device_type,
-            manufacturer=self.device.manufacturer or "Amazon",
-            hw_version=self.device.hardware_version,
-            sw_version=self.device.software_version,
-            serial_number=serial_num,
+            manufacturer=model_details.get("manufacturer", "Amazon"),
+            hw_version=model_details.get("hw_version"),
+            sw_version=(
+                self.device.software_version if model != SPEAKER_GROUP_MODEL else None
+            ),
+            serial_number=serial_num if model != SPEAKER_GROUP_MODEL else None,
         )
         self.entity_description = description
         self._attr_unique_id = f"{serial_num}-{description.key}"

homeassistant/components/alexa_devices/manifest.json

@@ -8,5 +8,5 @@
   "iot_class": "cloud_polling",
   "loggers": ["aioamazondevices"],
   "quality_scale": "platinum",
-  "requirements": ["aioamazondevices==13.3.0"]
+  "requirements": ["aioamazondevices==12.0.0"]
 }

homeassistant/components/alexa_devices/services.py

@@ -16,6 +16,9 @@ from .coordinator import AmazonConfigEntry
 ATTR_TEXT_COMMAND = "text_command"
 ATTR_SOUND = "sound"
 ATTR_INFO_SKILL = "info_skill"
+SERVICE_TEXT_COMMAND = "send_text_command"
+SERVICE_SOUND_NOTIFICATION = "send_sound"
+SERVICE_INFO_SKILL = "send_info_skill"
 
 SCHEMA_SOUND_SERVICE = vol.Schema(
     {
@@ -125,17 +128,17 @@ def async_setup_services(hass: HomeAssistant) -> None:
     """Set up the services for the Amazon Devices integration."""
     for service_name, method, schema in (
         (
-            "send_sound",
+            SERVICE_SOUND_NOTIFICATION,
             async_send_sound_notification,
             SCHEMA_SOUND_SERVICE,
         ),
         (
-            "send_text_command",
+            SERVICE_TEXT_COMMAND,
             async_send_text_command,
             SCHEMA_CUSTOM_COMMAND,
         ),
         (
-            "send_info_skill",
+            SERVICE_INFO_SKILL,
             async_send_info_skill,
             SCHEMA_INFO_SKILL,
         ),

homeassistant/components/alexa_devices/switch.py

@@ -101,10 +101,7 @@ class AmazonSwitchEntity(AmazonEntity, SwitchEntity):
             assert method is not None
 
         await method(self.device, state)
-        self.coordinator.data[self.device.serial_number].sensors[
-            self.entity_description.key
-        ].value = state
-        self.async_write_ha_state()
+        await self.coordinator.async_request_refresh()
 
     async def async_turn_on(self, **kwargs: Any) -> None:
         """Turn the switch on."""

homeassistant/components/amberelectric/const.py

@@ -16,6 +16,8 @@ ATTRIBUTION = "Data provided by Amber Electric"
 LOGGER = logging.getLogger(__package__)
 PLATFORMS = [Platform.BINARY_SENSOR, Platform.SENSOR]
 
+SERVICE_GET_FORECASTS = "get_forecasts"
+
 GENERAL_CHANNEL = "general"
 CONTROLLED_LOAD_CHANNEL = "controlled_load"
 FEED_IN_CHANNEL = "feed_in"

homeassistant/components/amberelectric/services.py

@@ -22,6 +22,7 @@ from .const import (
     DOMAIN,
     FEED_IN_CHANNEL,
     GENERAL_CHANNEL,
+    SERVICE_GET_FORECASTS,
 )
 from .coordinator import AmberConfigEntry
 from .helpers import format_cents_to_dollars, normalize_descriptor
@@ -100,7 +101,7 @@ def async_setup_services(hass: HomeAssistant) -> None:
 
     hass.services.async_register(
         DOMAIN,
-        "get_forecasts",
+        SERVICE_GET_FORECASTS,
         handle_get_forecasts,
         GET_FORECASTS_SCHEMA,
         supports_response=SupportsResponse.ONLY,

homeassistant/components/amcrest/camera.py

@@ -49,6 +49,18 @@ SCAN_INTERVAL = timedelta(seconds=15)
 
 STREAM_SOURCE_LIST = ["snapshot", "mjpeg", "rtsp"]
 
+_SRV_EN_REC = "enable_recording"
+_SRV_DS_REC = "disable_recording"
+_SRV_EN_AUD = "enable_audio"
+_SRV_DS_AUD = "disable_audio"
+_SRV_EN_MOT_REC = "enable_motion_recording"
+_SRV_DS_MOT_REC = "disable_motion_recording"
+_SRV_GOTO = "goto_preset"
+_SRV_CBW = "set_color_bw"
+_SRV_TOUR_ON = "start_tour"
+_SRV_TOUR_OFF = "stop_tour"
+
+_SRV_PTZ_CTRL = "ptz_control"
 _ATTR_PTZ_TT = "travel_time"
 _ATTR_PTZ_MOV = "movement"
 _MOV = [
@@ -91,17 +103,17 @@ _SRV_PTZ_SCHEMA = _SRV_SCHEMA.extend(
 )
 
 CAMERA_SERVICES = {
-    "enable_recording": (_SRV_SCHEMA, "async_enable_recording", ()),
-    "disable_recording": (_SRV_SCHEMA, "async_disable_recording", ()),
-    "enable_audio": (_SRV_SCHEMA, "async_enable_audio", ()),
-    "disable_audio": (_SRV_SCHEMA, "async_disable_audio", ()),
-    "enable_motion_recording": (_SRV_SCHEMA, "async_enable_motion_recording", ()),
-    "disable_motion_recording": (_SRV_SCHEMA, "async_disable_motion_recording", ()),
-    "goto_preset": (_SRV_GOTO_SCHEMA, "async_goto_preset", (_ATTR_PRESET,)),
-    "set_color_bw": (_SRV_CBW_SCHEMA, "async_set_color_bw", (_ATTR_COLOR_BW,)),
-    "start_tour": (_SRV_SCHEMA, "async_start_tour", ()),
-    "stop_tour": (_SRV_SCHEMA, "async_stop_tour", ()),
-    "ptz_control": (
+    _SRV_EN_REC: (_SRV_SCHEMA, "async_enable_recording", ()),
+    _SRV_DS_REC: (_SRV_SCHEMA, "async_disable_recording", ()),
+    _SRV_EN_AUD: (_SRV_SCHEMA, "async_enable_audio", ()),
+    _SRV_DS_AUD: (_SRV_SCHEMA, "async_disable_audio", ()),
+    _SRV_EN_MOT_REC: (_SRV_SCHEMA, "async_enable_motion_recording", ()),
+    _SRV_DS_MOT_REC: (_SRV_SCHEMA, "async_disable_motion_recording", ()),
+    _SRV_GOTO: (_SRV_GOTO_SCHEMA, "async_goto_preset", (_ATTR_PRESET,)),
+    _SRV_CBW: (_SRV_CBW_SCHEMA, "async_set_color_bw", (_ATTR_COLOR_BW,)),
+    _SRV_TOUR_ON: (_SRV_SCHEMA, "async_start_tour", ()),
+    _SRV_TOUR_OFF: (_SRV_SCHEMA, "async_stop_tour", ()),
+    _SRV_PTZ_CTRL: (
         _SRV_PTZ_SCHEMA,
         "async_ptz_control",
         (_ATTR_PTZ_MOV, _ATTR_PTZ_TT),

homeassistant/components/analytics/analytics.py

@@ -338,7 +338,6 @@ class Analytics:
 
         hass = self._hass
         supervisor_info = None
-        addons_info: dict[str, Any] | None = None
         operating_system_info: dict[str, Any] = {}
 
         if self._data.uuid is None:
@@ -348,7 +347,6 @@ class Analytics:
         if self.supervisor:
             supervisor_info = hassio.get_supervisor_info(hass)
             operating_system_info = hassio.get_os_info(hass) or {}
-            addons_info = hassio.get_addons_info(hass) or {}
 
         system_info = await async_get_system_info(hass)
         integrations = []
@@ -421,10 +419,13 @@ class Analytics:
 
                 integrations.append(integration.domain)
 
-            if addons_info is not None:
+            if supervisor_info is not None:
                 supervisor_client = hassio.get_supervisor_client(hass)
                 installed_addons = await asyncio.gather(
-                    *(supervisor_client.addons.addon_info(slug) for slug in addons_info)
+                    *(
+                        supervisor_client.addons.addon_info(addon[ATTR_SLUG])
+                        for addon in supervisor_info[ATTR_ADDONS]
+                    )
                 )
                 addons.extend(
                     {

homeassistant/components/androidtv/media_player.py

@@ -36,7 +36,7 @@ from .const import (
     SIGNAL_CONFIG_ENTITY,
 )
 from .entity import AndroidTVEntity, adb_decorator
-from .services import ATTR_ADB_RESPONSE, ATTR_HDMI_INPUT
+from .services import ATTR_ADB_RESPONSE, ATTR_HDMI_INPUT, SERVICE_LEARN_SENDEVENT
 
 _LOGGER = logging.getLogger(__name__)
 
@@ -271,7 +271,7 @@ class ADBDevice(AndroidTVEntity, MediaPlayerEntity):
             self.async_write_ha_state()
 
             msg = (
-                f"Output from service 'learn_sendevent' from"
+                f"Output from service '{SERVICE_LEARN_SENDEVENT}' from"
                 f" {self.entity_id}: '{output}'"
             )
             persistent_notification.async_create(

homeassistant/components/androidtv/services.py

@@ -16,6 +16,11 @@ ATTR_DEVICE_PATH = "device_path"
 ATTR_HDMI_INPUT = "hdmi_input"
 ATTR_LOCAL_PATH = "local_path"
 
+SERVICE_ADB_COMMAND = "adb_command"
+SERVICE_DOWNLOAD = "download"
+SERVICE_LEARN_SENDEVENT = "learn_sendevent"
+SERVICE_UPLOAD = "upload"
+
 
 @callback
 def async_setup_services(hass: HomeAssistant) -> None:
@@ -24,7 +29,7 @@ def async_setup_services(hass: HomeAssistant) -> None:
     service.async_register_platform_entity_service(
         hass,
         DOMAIN,
-        "adb_command",
+        SERVICE_ADB_COMMAND,
         entity_domain=MEDIA_PLAYER_DOMAIN,
         schema={vol.Required(ATTR_COMMAND): cv.string},
         func="adb_command",
@@ -32,7 +37,7 @@ def async_setup_services(hass: HomeAssistant) -> None:
     service.async_register_platform_entity_service(
         hass,
         DOMAIN,
-        "learn_sendevent",
+        SERVICE_LEARN_SENDEVENT,
         entity_domain=MEDIA_PLAYER_DOMAIN,
         schema=None,
         func="learn_sendevent",
@@ -40,7 +45,7 @@ def async_setup_services(hass: HomeAssistant) -> None:
     service.async_register_platform_entity_service(
         hass,
         DOMAIN,
-        "download",
+        SERVICE_DOWNLOAD,
         entity_domain=MEDIA_PLAYER_DOMAIN,
         schema={
             vol.Required(ATTR_DEVICE_PATH): cv.string,
@@ -51,7 +56,7 @@ def async_setup_services(hass: HomeAssistant) -> None:
     service.async_register_platform_entity_service(
         hass,
         DOMAIN,
-        "upload",
+        SERVICE_UPLOAD,
         entity_domain=MEDIA_PLAYER_DOMAIN,
         schema={
             vol.Required(ATTR_DEVICE_PATH): cv.string,

homeassistant/components/androidtv_remote/helpers.py

@@ -27,4 +27,4 @@ def create_api(hass: HomeAssistant, host: str, enable_ime: bool) -> AndroidTVRem
 
 def get_enable_ime(entry: AndroidTVRemoteConfigEntry) -> bool:
     """Get value of enable_ime option or its default value."""
-    return bool(entry.options.get(CONF_ENABLE_IME, CONF_ENABLE_IME_DEFAULT_VALUE))
+    return entry.options.get(CONF_ENABLE_IME, CONF_ENABLE_IME_DEFAULT_VALUE)  # type: ignore[no-any-return]

homeassistant/components/androidtv_remote/manifest.json

@@ -8,6 +8,6 @@
   "iot_class": "local_push",
   "loggers": ["androidtvremote2"],
   "quality_scale": "platinum",
-  "requirements": ["androidtvremote2==0.3.1"],
+  "requirements": ["androidtvremote2==0.2.3"],
   "zeroconf": ["_androidtvremote2._tcp.local."]
 }

homeassistant/components/anglian_water/manifest.json

@@ -9,5 +9,5 @@
   "iot_class": "cloud_polling",
   "loggers": ["pyanglianwater"],
   "quality_scale": "bronze",
-  "requirements": ["pyanglianwater==3.1.1"]
+  "requirements": ["pyanglianwater==3.1.0"]
 }

homeassistant/components/anglian_water/sensor.py

@@ -4,7 +4,6 @@ from __future__ import annotations
 
 from collections.abc import Callable
 from dataclasses import dataclass
-from datetime import datetime
 from enum import StrEnum
 
 from pyanglianwater.meter import SmartMeter
@@ -33,14 +32,13 @@ class AnglianWaterSensor(StrEnum):
     YESTERDAY_WATER_COST = "yesterday_water_cost"
     YESTERDAY_SEWERAGE_COST = "yesterday_sewerage_cost"
     LATEST_READING = "latest_reading"
-    LAST_UPDATED = "last_updated"
 
 
 @dataclass(frozen=True, kw_only=True)
 class AnglianWaterSensorEntityDescription(SensorEntityDescription):
     """Describes AnglianWater sensor entity."""
 
-    value_fn: Callable[[SmartMeter], float | datetime | None]
+    value_fn: Callable[[SmartMeter], float]
 
 
 ENTITY_DESCRIPTIONS: tuple[AnglianWaterSensorEntityDescription, ...] = (
@@ -78,13 +76,6 @@ ENTITY_DESCRIPTIONS: tuple[AnglianWaterSensorEntityDescription, ...] = (
         translation_key=AnglianWaterSensor.YESTERDAY_SEWERAGE_COST,
         entity_category=EntityCategory.DIAGNOSTIC,
     ),
-    AnglianWaterSensorEntityDescription(
-        key=AnglianWaterSensor.LAST_UPDATED,
-        device_class=SensorDeviceClass.TIMESTAMP,
-        value_fn=lambda entity: entity.last_updated,
-        translation_key=AnglianWaterSensor.LAST_UPDATED,
-        entity_category=EntityCategory.DIAGNOSTIC,
-    ),
 )
 
 
@@ -121,6 +112,6 @@ class AnglianWaterSensorEntity(AnglianWaterEntity, SensorEntity):
         self.entity_description = description
 
     @property
-    def native_value(self) -> float | datetime | None:
+    def native_value(self) -> float | None:
         """Return the state of the sensor."""
         return self.entity_description.value_fn(self.smart_meter)

homeassistant/components/anglian_water/strings.json

@@ -34,9 +34,6 @@
   },
   "entity": {
     "sensor": {
-      "last_updated": {
-        "name": "Last meter reading processed"
-      },
       "latest_reading": {
         "name": "Latest reading"
       },

homeassistant/components/anthropic/ai_task.py

@@ -46,7 +46,6 @@ class AnthropicTaskEntity(
         ai_task.AITaskEntityFeature.GENERATE_DATA
         | ai_task.AITaskEntityFeature.SUPPORT_ATTACHMENTS
     )
-    _attr_translation_key = "ai_task_data"
 
     async def _async_generate_data(
         self,

homeassistant/components/anthropic/config_flow.py

@@ -43,9 +43,7 @@ from homeassistant.helpers.selector import (
 from homeassistant.helpers.typing import VolDictType
 
 from .const import (
-    CODE_EXECUTION_UNSUPPORTED_MODELS,
     CONF_CHAT_MODEL,
-    CONF_CODE_EXECUTION,
     CONF_MAX_TOKENS,
     CONF_PROMPT,
     CONF_RECOMMENDED,
@@ -417,16 +415,6 @@ class ConversationSubentryFlowHandler(ConfigSubentryFlow):
         else:
             self.options.pop(CONF_THINKING_EFFORT, None)
 
-        if not model.startswith(tuple(CODE_EXECUTION_UNSUPPORTED_MODELS)):
-            step_schema[
-                vol.Optional(
-                    CONF_CODE_EXECUTION,
-                    default=DEFAULT[CONF_CODE_EXECUTION],
-                )
-            ] = bool
-        else:
-            self.options.pop(CONF_CODE_EXECUTION, None)
-
         if not model.startswith(tuple(WEB_SEARCH_UNSUPPORTED_MODELS)):
             step_schema.update(
                 {

homeassistant/components/anthropic/const.py

@@ -11,7 +11,6 @@ DEFAULT_AI_TASK_NAME = "Claude AI Task"
 CONF_RECOMMENDED = "recommended"
 CONF_PROMPT = "prompt"
 CONF_CHAT_MODEL = "chat_model"
-CONF_CODE_EXECUTION = "code_execution"
 CONF_MAX_TOKENS = "max_tokens"
 CONF_TEMPERATURE = "temperature"
 CONF_THINKING_BUDGET = "thinking_budget"
@@ -26,7 +25,6 @@ CONF_WEB_SEARCH_TIMEZONE = "timezone"
 
 DEFAULT = {
     CONF_CHAT_MODEL: "claude-haiku-4-5",
-    CONF_CODE_EXECUTION: False,
     CONF_MAX_TOKENS: 3000,
     CONF_TEMPERATURE: 1.0,
     CONF_THINKING_BUDGET: 0,
@@ -67,10 +65,6 @@ WEB_SEARCH_UNSUPPORTED_MODELS = [
     "claude-3-haiku",
 ]
 
-CODE_EXECUTION_UNSUPPORTED_MODELS = [
-    "claude-3-haiku",
-]
-
 DEPRECATED_MODELS = [
     "claude-3",
 ]

homeassistant/components/anthropic/conversation.py

@@ -37,7 +37,6 @@ class AnthropicConversationEntity(
     """Anthropic conversation agent."""
 
     _attr_supports_streaming = True
-    _attr_translation_key = "conversation"
 
     def __init__(self, entry: AnthropicConfigEntry, subentry: ConfigSubentry) -> None:
         """Initialize the agent."""

homeassistant/components/anthropic/entity.py

@@ -3,23 +3,19 @@
 import base64
 from collections.abc import AsyncGenerator, Callable, Iterable
 from dataclasses import dataclass, field
-from datetime import UTC, datetime
 import json
 from mimetypes import guess_file_type
 from pathlib import Path
-from typing import Any, Literal, cast
+from typing import Any
 
 import anthropic
 from anthropic import AsyncStream
 from anthropic.types import (
     Base64ImageSourceParam,
     Base64PDFSourceParam,
-    BashCodeExecutionToolResultBlock,
     CitationsDelta,
     CitationsWebSearchResultLocation,
     CitationWebSearchResultLocationParam,
-    CodeExecutionTool20250825Param,
-    Container,
     ContentBlockParam,
     DocumentBlockParam,
     ImageBlockParam,
@@ -45,7 +41,6 @@ from anthropic.types import (
     TextCitation,
     TextCitationParam,
     TextDelta,
-    TextEditorCodeExecutionToolResultBlock,
     ThinkingBlock,
     ThinkingBlockParam,
     ThinkingConfigAdaptiveParam,
@@ -56,21 +51,18 @@ from anthropic.types import (
     ToolChoiceAutoParam,
     ToolChoiceToolParam,
     ToolParam,
+    ToolResultBlockParam,
     ToolUnionParam,
     ToolUseBlock,
     ToolUseBlockParam,
     Usage,
     WebSearchTool20250305Param,
+    WebSearchToolRequestErrorParam,
     WebSearchToolResultBlock,
-    WebSearchToolResultBlockParamContentParam,
-)
-from anthropic.types.bash_code_execution_tool_result_block_param import (
-    Content as BashCodeExecutionToolResultContentParam,
+    WebSearchToolResultBlockParam,
+    WebSearchToolResultError,
 )
 from anthropic.types.message_create_params import MessageCreateParamsStreaming
-from anthropic.types.text_editor_code_execution_tool_result_block_param import (
-    Content as TextEditorCodeExecutionToolResultContentParam,
-)
 import voluptuous as vol
 from voluptuous_openapi import convert
 
@@ -82,12 +74,10 @@ from homeassistant.helpers import device_registry as dr, llm
 from homeassistant.helpers.entity import Entity
 from homeassistant.helpers.json import json_dumps
 from homeassistant.util import slugify
-from homeassistant.util.json import JsonObjectType
 
 from . import AnthropicConfigEntry
 from .const import (
     CONF_CHAT_MODEL,
-    CONF_CODE_EXECUTION,
     CONF_MAX_TOKENS,
     CONF_TEMPERATURE,
     CONF_THINKING_BUDGET,
@@ -144,7 +134,6 @@ class ContentDetails:
     citation_details: list[CitationDetails] = field(default_factory=list)
     thinking_signature: str | None = None
     redacted_thinking: str | None = None
-    container: Container | None = None
 
     def has_content(self) -> bool:
         """Check if there is any text content."""
@@ -155,7 +144,6 @@ class ContentDetails:
         return (
             self.thinking_signature is not None
             or self.redacted_thinking is not None
-            or self.container is not None
             or self.has_citations()
         )
 
@@ -200,53 +188,30 @@ class ContentDetails:
 
 def _convert_content(
     chat_content: Iterable[conversation.Content],
-) -> tuple[list[MessageParam], str | None]:
+) -> list[MessageParam]:
     """Transform HA chat_log content into Anthropic API format."""
     messages: list[MessageParam] = []
-    container_id: str | None = None
 
     for content in chat_content:
         if isinstance(content, conversation.ToolResultContent):
-            external_tool = True
             if content.tool_name == "web_search":
-                tool_result_block: ContentBlockParam = {
-                    "type": "web_search_tool_result",
-                    "tool_use_id": content.tool_call_id,
-                    "content": cast(
-                        WebSearchToolResultBlockParamContentParam,
-                        content.tool_result["content"]
-                        if "content" in content.tool_result
-                        else {
-                            "type": "web_search_tool_result_error",
-                            "error_code": content.tool_result.get(
-                                "error_code", "unavailable"
-                            ),
-                        },
+                tool_result_block: ContentBlockParam = WebSearchToolResultBlockParam(
+                    type="web_search_tool_result",
+                    tool_use_id=content.tool_call_id,
+                    content=content.tool_result["content"]
+                    if "content" in content.tool_result
+                    else WebSearchToolRequestErrorParam(
+                        type="web_search_tool_result_error",
+                        error_code=content.tool_result.get("error_code", "unavailable"),  # type: ignore[typeddict-item]
                     ),
-                }
-            elif content.tool_name == "bash_code_execution":
-                tool_result_block = {
-                    "type": "bash_code_execution_tool_result",
-                    "tool_use_id": content.tool_call_id,
-                    "content": cast(
-                        BashCodeExecutionToolResultContentParam, content.tool_result
-                    ),
-                }
-            elif content.tool_name == "text_editor_code_execution":
-                tool_result_block = {
-                    "type": "text_editor_code_execution_tool_result",
-                    "tool_use_id": content.tool_call_id,
-                    "content": cast(
-                        TextEditorCodeExecutionToolResultContentParam,
-                        content.tool_result,
-                    ),
-                }
+                )
+                external_tool = True
             else:
-                tool_result_block = {
-                    "type": "tool_result",
-                    "tool_use_id": content.tool_call_id,
-                    "content": json_dumps(content.tool_result),
-                }
+                tool_result_block = ToolResultBlockParam(
+                    type="tool_result",
+                    tool_use_id=content.tool_call_id,
+                    content=json_dumps(content.tool_result),
+                )
                 external_tool = False
             if not messages or messages[-1]["role"] != (
                 "assistant" if external_tool else "user"
@@ -312,11 +277,6 @@ def _convert_content(
                             data=content.native.redacted_thinking,
                         )
                     )
-                if (
-                    content.native.container is not None
-                    and content.native.container.expires_at > datetime.now(UTC)
-                ):
-                    container_id = content.native.container.id
 
             if content.content:
                 current_index = 0
@@ -365,23 +325,10 @@ def _convert_content(
                         ServerToolUseBlockParam(
                             type="server_tool_use",
                             id=tool_call.id,
-                            name=cast(
-                                Literal[
-                                    "web_search",
-                                    "bash_code_execution",
-                                    "text_editor_code_execution",
-                                ],
-                                tool_call.tool_name,
-                            ),
+                            name="web_search",
                             input=tool_call.tool_args,
                         )
-                        if tool_call.external
-                        and tool_call.tool_name
-                        in [
-                            "web_search",
-                            "bash_code_execution",
-                            "text_editor_code_execution",
-                        ]
+                        if tool_call.external and tool_call.tool_name == "web_search"
                         else ToolUseBlockParam(
                             type="tool_use",
                             id=tool_call.id,
@@ -400,10 +347,10 @@ def _convert_content(
                 # If there is only one text block, simplify the content to a string
                 messages[-1]["content"] = messages[-1]["content"][0]["text"]
         else:
-            # Note: We don't pass SystemContent here as it's passed to the API as the prompt
-            raise HomeAssistantError("Unexpected content type in chat log")
+            # Note: We don't pass SystemContent here as its passed to the API as the prompt
+            raise TypeError(f"Unexpected content type: {type(content)}")
 
-    return messages, container_id
+    return messages
 
 
 async def _transform_stream(  # noqa: C901 - This is complex, but better to have it in one place
@@ -442,8 +389,8 @@ async def _transform_stream(  # noqa: C901 - This is complex, but better to have
 
     Each message could contain multiple blocks of the same type.
     """
-    if stream is None or not hasattr(stream, "__aiter__"):
-        raise HomeAssistantError("Expected a stream of messages")
+    if stream is None:
+        raise TypeError("Expected a stream of messages")
 
     current_tool_block: ToolUseBlockParam | ServerToolUseBlockParam | None = None
     current_tool_args: str
@@ -456,6 +403,8 @@ async def _transform_stream(  # noqa: C901 - This is complex, but better to have
         LOGGER.debug("Received response: %s", response)
 
         if isinstance(response, RawMessageStartEvent):
+            if response.message.role != "assistant":
+                raise ValueError("Unexpected message role")
             input_usage = response.message.usage
             first_block = True
         elif isinstance(response, RawContentBlockStartEvent):
@@ -529,14 +478,7 @@ async def _transform_stream(  # noqa: C901 - This is complex, but better to have
                     input={},
                 )
                 current_tool_args = ""
-            elif isinstance(
-                response.content_block,
-                (
-                    WebSearchToolResultBlock,
-                    BashCodeExecutionToolResultBlock,
-                    TextEditorCodeExecutionToolResultBlock,
-                ),
-            ):
+            elif isinstance(response.content_block, WebSearchToolResultBlock):
                 if content_details:
                     content_details.delete_empty()
                     yield {"native": content_details}
@@ -545,16 +487,26 @@ async def _transform_stream(  # noqa: C901 - This is complex, but better to have
                 yield {
                     "role": "tool_result",
                     "tool_call_id": response.content_block.tool_use_id,
-                    "tool_name": response.content_block.type.removesuffix(
-                        "_tool_result"
-                    ),
+                    "tool_name": "web_search",
                     "tool_result": {
-                        "content": cast(
-                            JsonObjectType, response.content_block.to_dict()["content"]
-                        )
+                        "type": "web_search_tool_result_error",
+                        "error_code": response.content_block.content.error_code,
                     }
-                    if isinstance(response.content_block.content, list)
-                    else cast(JsonObjectType, response.content_block.content.to_dict()),
+                    if isinstance(
+                        response.content_block.content, WebSearchToolResultError
+                    )
+                    else {
+                        "content": [
+                            {
+                                "type": "web_search_result",
+                                "encrypted_content": block.encrypted_content,
+                                "page_age": block.page_age,
+                                "title": block.title,
+                                "url": block.url,
+                            }
+                            for block in response.content_block.content
+                        ]
+                    },
                 }
                 first_block = True
         elif isinstance(response, RawContentBlockDeltaEvent):
@@ -603,7 +555,6 @@ async def _transform_stream(  # noqa: C901 - This is complex, but better to have
         elif isinstance(response, RawMessageDeltaEvent):
             if (usage := response.usage) is not None:
                 chat_log.async_trace(_create_token_stats(input_usage, usage))
-            content_details.container = response.delta.container
             if response.delta.stop_reason == "refusal":
                 raise HomeAssistantError("Potential policy violation detected")
         elif isinstance(response, RawMessageStopEvent):
@@ -664,7 +615,7 @@ class AnthropicBaseLLMEntity(Entity):
 
         system = chat_log.content[0]
         if not isinstance(system, conversation.SystemContent):
-            raise HomeAssistantError("First message must be a system message")
+            raise TypeError("First message must be a system message")
 
         # System prompt with caching enabled
         system_prompt: list[TextBlockParam] = [
@@ -675,7 +626,7 @@ class AnthropicBaseLLMEntity(Entity):
             )
         ]
 
-        messages, container_id = _convert_content(chat_log.content[1:])
+        messages = _convert_content(chat_log.content[1:])
 
         model = options.get(CONF_CHAT_MODEL, DEFAULT[CONF_CHAT_MODEL])
 
@@ -685,7 +636,6 @@ class AnthropicBaseLLMEntity(Entity):
             max_tokens=options.get(CONF_MAX_TOKENS, DEFAULT[CONF_MAX_TOKENS]),
             system=system_prompt,
             stream=True,
-            container=container_id,
         )
 
         if not model.startswith(tuple(NON_ADAPTIVE_THINKING_MODELS)):
@@ -724,14 +674,6 @@ class AnthropicBaseLLMEntity(Entity):
                 for tool in chat_log.llm_api.tools
             ]
 
-        if options.get(CONF_CODE_EXECUTION):
-            tools.append(
-                CodeExecutionTool20250825Param(
-                    name="code_execution",
-                    type="code_execution_20250825",
-                ),
-            )
-
         if options.get(CONF_WEB_SEARCH):
             web_search = WebSearchTool20250305Param(
                 name="web_search",
@@ -842,25 +784,21 @@ class AnthropicBaseLLMEntity(Entity):
             try:
                 stream = await client.messages.create(**model_args)
 
-                new_messages, model_args["container"] = _convert_content(
-                    [
-                        content
-                        async for content in chat_log.async_add_delta_content_stream(
-                            self.entity_id,
-                            _transform_stream(
-                                chat_log,
-                                stream,
-                                output_tool=structure_name or None,
-                            ),
-                        )
-                    ]
+                messages.extend(
+                    _convert_content(
+                        [
+                            content
+                            async for content in chat_log.async_add_delta_content_stream(
+                                self.entity_id,
+                                _transform_stream(
+                                    chat_log,
+                                    stream,
+                                    output_tool=structure_name or None,
+                                ),
+                            )
+                        ]
+                    )
                 )
-                messages.extend(new_messages)
-            except anthropic.AuthenticationError as err:
-                self.entry.async_start_reauth(self.hass)
-                raise HomeAssistantError(
-                    "Authentication error with Anthropic API, reauthentication required"
-                ) from err
             except anthropic.AnthropicError as err:
                 raise HomeAssistantError(
                     f"Sorry, I had a problem talking to Anthropic: {err}"

homeassistant/components/anthropic/icons.json

@@ -1,14 +0,0 @@
-{
-  "entity": {
-    "ai_task": {
-      "ai_task_data": {
-        "default": "mdi:asterisk"
-      }
-    },
-    "conversation": {
-      "conversation": {
-        "default": "mdi:asterisk"
-      }
-    }
-  }
-}