Add card prefix

Fix comments and bump lib
Improve tests
2026-05-28 03:33:19 +02:00 · 2026-05-27 21:16:04 +02:00 · 2026-05-27 10:49:39 +02:00 · 2026-05-27 10:16:54 +02:00 · 2026-05-27 10:08:26 +02:00 · 2026-05-27 00:20:42 +02:00
416 changed files with 4102 additions and 15053 deletions
@@ -1,52 +0,0 @@
-name: Cache and install APT packages
-description: >-
-  Wraps awalsh128/cache-apt-pkgs-action with the workarounds Home Assistant CI
-  needs. Removes the conflicting Microsoft apt source before any apt run, and
-  points the dynamic linker at the host's multiarch lib subdirectories so
-  shared libraries that rely on update-alternatives or postinst-managed paths
-  (eg libblas, liblapack pulled in by ffmpeg) stay reachable since the upstream
-  action does not execute postinst scripts on cache restore.
-
-inputs:
-  packages:
-    description: Space-delimited list of apt packages to install.
-    required: true
-  version:
-    description: Cache version. Bump to invalidate the cache.
-    required: false
-    default: "1"
-  execute_install_scripts:
-    description: >-
-      Pass-through to awalsh128/cache-apt-pkgs-action. Postinst scripts are not
-      actually cached by the upstream action, so this is largely a no-op today.
-    required: false
-    default: "false"
-
-runs:
-  using: composite
-  steps:
-    - name: Remove conflicting Microsoft apt source
-      shell: bash
-      run: sudo rm -f /etc/apt/sources.list.d/microsoft-prod.list
-    - name: Install apt packages via cache
-      uses: awalsh128/cache-apt-pkgs-action@acb598e5ddbc6f68a970c5da0688d2f3a9f04d05 # v1.5.3
-      with:
-        packages: ${{ inputs.packages }}
-        version: ${{ inputs.version }}
-        execute_install_scripts: ${{ inputs.execute_install_scripts }}
-    - name: Refresh dynamic linker cache
-      shell: bash
-      run: |
-        # awalsh128/cache-apt-pkgs-action does not run postinst scripts on
-        # cache restore, so update-alternatives symlinks (eg the one libblas
-        # creates at /usr/lib/<multiarch>/libblas.so.3) are never produced.
-        # Add every /usr/lib/<multiarch> subdirectory that holds shared
-        # libraries to the ldconfig search path so the dynamic linker still
-        # finds them.  Use dpkg-architecture to derive the host's multiarch
-        # tuple so this works on non-x86_64 runners too.
-        multiarch="$(dpkg-architecture -qDEB_HOST_MULTIARCH)"
-        find "/usr/lib/${multiarch}" -mindepth 2 -maxdepth 2 \
-          -name '*.so.*' -printf '%h\n' \
-          | sort -u \
-          | sudo tee /etc/ld.so.conf.d/zzz-cache-apt-extras.conf > /dev/null
-        sudo ldconfig
@@ -43,7 +43,6 @@ This repository contains the core of Home Assistant, a Python 3 based home autom
 - Avoid using conditions/branching in tests. Instead, either split tests or adjust the test parametrization to cover all cases without branching.
 - If multiple tests share most of their code, use `pytest.mark.parametrize` to merge them into a single parameterized test instead of duplicating the body. Use `pytest.param` with an `id` parameter to name the test cases clearly.
 - We use Syrupy for snapshot testing. Leverage `.ambr` snapshots instead of repetitive and exhaustive generation of test data within Python code itself.
- Hardcoded `entity_id`s in tests are fine. If the same one is repeated, use a constant.

 ## Good practices

@@ -60,7 +60,9 @@ env:
  # - 15.2 is the latest (as of 9 Feb 2023)
  POSTGRESQL_VERSIONS: "['postgres:12.14','postgres:15.2']"
  UV_CACHE_DIR: /tmp/uv-cache
-  APT_CACHE_VERSION: 1
+  APT_CACHE_BASE: /home/runner/work/apt
+  APT_CACHE_DIR: /home/runner/work/apt/cache
+  APT_LIST_CACHE_DIR: /home/runner/work/apt/lists
  SQLALCHEMY_WARN_20: 1
  PYTHONASYNCIODEBUG: 1
  HASS_CI: 1
@@ -84,6 +86,7 @@ jobs:
      core: ${{ steps.core.outputs.changes }}
      integrations_glob: ${{ steps.info.outputs.integrations_glob }}
      integrations: ${{ steps.integrations.outputs.changes }}
+      apt_cache_key: ${{ steps.generate_apt_cache_key.outputs.key }}
      python_cache_key: ${{ steps.generate_python_cache_key.outputs.key }}
      requirements: ${{ steps.core.outputs.requirements }}
      mariadb_groups: ${{ steps.info.outputs.mariadb_groups }}
@@ -113,6 +116,10 @@ jobs:
          # Include HA_SHORT_VERSION to force the immediate creation
          # of a new uv cache entry after a version bump.
          echo "key=venv-${CACHE_VERSION}-${HA_SHORT_VERSION}-${HASH_REQUIREMENTS_TEST}-${HASH_REQUIREMENTS}-${HASH_REQUIREMENTS_ALL}-${HASH_PACKAGE_CONSTRAINTS}-${HASH_GEN_REQUIREMENTS}" >> $GITHUB_OUTPUT
+      - name: Generate partial apt restore key
+        id: generate_apt_cache_key
+        run: |
+          echo "key=$(lsb_release -rs)-apt-${CACHE_VERSION}-${HA_SHORT_VERSION}" >> $GITHUB_OUTPUT
      - name: Filter for core changes
        uses: dorny/paths-filter@fbd0ab8f3e69293af611ebaee6363fc25e6d187d # v4.0.1
        id: core
@@ -377,36 +384,65 @@ jobs:
          path: ${{ env.UV_CACHE_DIR }}
          key: ${{ steps.generate-uv-key.outputs.full_key }}
          restore-keys: ${{ steps.generate-uv-key.outputs.partial_key }}
+      - name: Check if apt cache exists
+        id: cache-apt-check
+        uses: actions/cache@27d5ce7f107fe9357f9df03efb73ab90386fccae # v5.0.5
+        with:
+          lookup-only: ${{ steps.cache-venv.outputs.cache-hit == 'true' }}
+          path: |
+            ${{ env.APT_CACHE_DIR }}
+            ${{ env.APT_LIST_CACHE_DIR }}
+          key: >-
+            ${{ runner.os }}-${{ runner.arch }}-${{ needs.info.outputs.apt_cache_key }}
      - name: Install additional OS dependencies
-        if: steps.cache-venv.outputs.cache-hit != 'true'
+        if: |
+          steps.cache-venv.outputs.cache-hit != 'true'
+          || steps.cache-apt-check.outputs.cache-hit != 'true'
+        id: install-os-deps
        timeout-minutes: 10
-        uses: ./.github/actions/cache-apt-packages
-        with:
-          packages: >-
-            bluez
-            ffmpeg
-            libturbojpeg
-            libxml2-utils
-            libavcodec-dev
-            libavdevice-dev
-            libavfilter-dev
-            libavformat-dev
-            libavutil-dev
-            libswresample-dev
-            libswscale-dev
-            libudev-dev
-          version: ${{ env.APT_CACHE_VERSION }}
-          execute_install_scripts: true
-      - name: Read uv version from requirements.txt
-        if: steps.cache-venv.outputs.cache-hit != 'true'
-        id: read-uv-version
+        env:
+          APT_CACHE_HIT: ${{ steps.cache-apt-check.outputs.cache-hit }}
        run: |
-          echo "version=$(grep '^uv==' requirements.txt | cut -d'=' -f3)" >> "$GITHUB_OUTPUT"
-      - name: Set up uv
-        if: steps.cache-venv.outputs.cache-hit != 'true'
-        uses: astral-sh/setup-uv@08807647e7069bb48b6ef5acd8ec9567f424441b # v8.1.0
+          sudo rm /etc/apt/sources.list.d/microsoft-prod.list
+          if [[ "${APT_CACHE_HIT}" != 'true' ]]; then
+            mkdir -p ${APT_CACHE_DIR}
+            mkdir -p ${APT_LIST_CACHE_DIR}
+          fi
+
+          sudo apt-get update \
+            -o Dir::Cache=${APT_CACHE_DIR} \
+            -o Dir::State::Lists=${APT_LIST_CACHE_DIR}
+          sudo apt-get -y install \
+            -o Dir::Cache=${APT_CACHE_DIR} \
+            -o Dir::State::Lists=${APT_LIST_CACHE_DIR} \
+            bluez \
+            ffmpeg \
+            libturbojpeg \
+            libxml2-utils \
+            libavcodec-dev \
+            libavdevice-dev \
+            libavfilter-dev \
+            libavformat-dev \
+            libavutil-dev \
+            libswresample-dev \
+            libswscale-dev \
+            libudev-dev
+
+          if [[ "${APT_CACHE_HIT}" != 'true' ]]; then
+            sudo chmod -R 755 ${APT_CACHE_BASE}
+          fi
+      - name: Save apt cache
+        if: |
+          always()
+          && steps.cache-apt-check.outputs.cache-hit != 'true'
+          && steps.install-os-deps.outcome == 'success'
+        uses: actions/cache/save@27d5ce7f107fe9357f9df03efb73ab90386fccae # v5.0.5
        with:
-          version: ${{ steps.read-uv-version.outputs.version }}
+          path: |
+            ${{ env.APT_CACHE_DIR }}
+            ${{ env.APT_LIST_CACHE_DIR }}
+          key: >-
+            ${{ runner.os }}-${{ runner.arch }}-${{ needs.info.outputs.apt_cache_key }}
      - name: Create Python virtual environment
        if: steps.cache-venv.outputs.cache-hit != 'true'
        id: create-venv
@@ -414,6 +450,8 @@ jobs:
          python -m venv venv
          . venv/bin/activate
          python --version
+          pip install "$(grep '^uv' < requirements.txt)"
+          uv pip install -U "pip>=25.2"
          uv pip install -r requirements.txt
          uv pip install -r requirements_all.txt -r requirements_test.txt
          uv pip install -e . --config-settings editable_mode=compat
@@ -468,16 +506,30 @@ jobs:
      && github.event.inputs.mypy-only != 'true'
      && github.event.inputs.audit-licenses-only != 'true'
    steps:
+      - name: Restore apt cache
+        uses: actions/cache/restore@27d5ce7f107fe9357f9df03efb73ab90386fccae # v5.0.5
+        with:
+          path: |
+            ${{ env.APT_CACHE_DIR }}
+            ${{ env.APT_LIST_CACHE_DIR }}
+          fail-on-cache-miss: true
+          key: >-
+            ${{ runner.os }}-${{ runner.arch }}-${{ needs.info.outputs.apt_cache_key }}
+      - name: Install additional OS dependencies
+        timeout-minutes: 10
+        run: |
+          sudo rm /etc/apt/sources.list.d/microsoft-prod.list
+          sudo apt-get update \
+            -o Dir::Cache=${APT_CACHE_DIR} \
+            -o Dir::State::Lists=${APT_LIST_CACHE_DIR}
+          sudo apt-get -y install \
+            -o Dir::Cache=${APT_CACHE_DIR} \
+            -o Dir::State::Lists=${APT_LIST_CACHE_DIR} \
+            libturbojpeg
      - name: Check out code from GitHub
        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
        with:
          persist-credentials: false
-      - name: Install additional OS dependencies
-        timeout-minutes: 10
-        uses: ./.github/actions/cache-apt-packages
-        with:
-          packages: libturbojpeg
-          version: ${{ env.APT_CACHE_VERSION }}
      - name: Set up Python
        id: python
        uses: actions/setup-python@a309ff8b426b58ec0e2a45f0f869d46889d02405 # v6.2.0
@@ -824,20 +876,32 @@ jobs:
      - info
      - base
    steps:
+      - name: Restore apt cache
+        uses: actions/cache/restore@27d5ce7f107fe9357f9df03efb73ab90386fccae # v5.0.5
+        with:
+          path: |
+            ${{ env.APT_CACHE_DIR }}
+            ${{ env.APT_LIST_CACHE_DIR }}
+          fail-on-cache-miss: true
+          key: >-
+            ${{ runner.os }}-${{ runner.arch }}-${{ needs.info.outputs.apt_cache_key }}
+      - name: Install additional OS dependencies
+        timeout-minutes: 10
+        run: |
+          sudo rm /etc/apt/sources.list.d/microsoft-prod.list
+          sudo apt-get update \
+            -o Dir::Cache=${APT_CACHE_DIR} \
+            -o Dir::State::Lists=${APT_LIST_CACHE_DIR}
+          sudo apt-get -y install \
+            -o Dir::Cache=${APT_CACHE_DIR} \
+            -o Dir::State::Lists=${APT_LIST_CACHE_DIR} \
+            bluez \
+            ffmpeg \
+            libturbojpeg
      - name: Check out code from GitHub
        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
        with:
          persist-credentials: false
-      - name: Install additional OS dependencies
-        timeout-minutes: 10
-        uses: ./.github/actions/cache-apt-packages
-        with:
-          packages: >-
-            bluez
-            ffmpeg
-            libturbojpeg
-          version: ${{ env.APT_CACHE_VERSION }}
-          execute_install_scripts: true
      - name: Set up Python
        id: python
        uses: actions/setup-python@a309ff8b426b58ec0e2a45f0f869d46889d02405 # v6.2.0
@@ -888,21 +952,33 @@ jobs:
        python-version: ${{ fromJson(needs.info.outputs.python_versions) }}
        group: ${{ fromJson(needs.info.outputs.test_groups) }}
    steps:
+      - name: Restore apt cache
+        uses: actions/cache/restore@27d5ce7f107fe9357f9df03efb73ab90386fccae # v5.0.5
+        with:
+          path: |
+            ${{ env.APT_CACHE_DIR }}
+            ${{ env.APT_LIST_CACHE_DIR }}
+          fail-on-cache-miss: true
+          key: >-
+            ${{ runner.os }}-${{ runner.arch }}-${{ needs.info.outputs.apt_cache_key }}
+      - name: Install additional OS dependencies
+        timeout-minutes: 10
+        run: |
+          sudo rm /etc/apt/sources.list.d/microsoft-prod.list
+          sudo apt-get update \
+            -o Dir::Cache=${APT_CACHE_DIR} \
+            -o Dir::State::Lists=${APT_LIST_CACHE_DIR}
+          sudo apt-get -y install \
+            -o Dir::Cache=${APT_CACHE_DIR} \
+            -o Dir::State::Lists=${APT_LIST_CACHE_DIR} \
+            bluez \
+            ffmpeg \
+            libturbojpeg \
+            libxml2-utils
      - name: Check out code from GitHub
        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
        with:
          persist-credentials: false
-      - name: Install additional OS dependencies
-        timeout-minutes: 10
-        uses: ./.github/actions/cache-apt-packages
-        with:
-          packages: >-
-            bluez
-            ffmpeg
-            libturbojpeg
-            libxml2-utils
-          version: ${{ env.APT_CACHE_VERSION }}
-          execute_install_scripts: true
      - name: Set up Python ${{ matrix.python-version }}
        id: python
        uses: actions/setup-python@a309ff8b426b58ec0e2a45f0f869d46889d02405 # v6.2.0
@@ -1029,22 +1105,34 @@ jobs:
        python-version: ${{ fromJson(needs.info.outputs.python_versions) }}
        mariadb-group: ${{ fromJson(needs.info.outputs.mariadb_groups) }}
    steps:
+      - name: Restore apt cache
+        uses: actions/cache/restore@27d5ce7f107fe9357f9df03efb73ab90386fccae # v5.0.5
+        with:
+          path: |
+            ${{ env.APT_CACHE_DIR }}
+            ${{ env.APT_LIST_CACHE_DIR }}
+          fail-on-cache-miss: true
+          key: >-
+            ${{ runner.os }}-${{ runner.arch }}-${{ needs.info.outputs.apt_cache_key }}
+      - name: Install additional OS dependencies
+        timeout-minutes: 10
+        run: |
+          sudo rm /etc/apt/sources.list.d/microsoft-prod.list
+          sudo apt-get update \
+            -o Dir::Cache=${APT_CACHE_DIR} \
+            -o Dir::State::Lists=${APT_LIST_CACHE_DIR}
+          sudo apt-get -y install \
+            -o Dir::Cache=${APT_CACHE_DIR} \
+            -o Dir::State::Lists=${APT_LIST_CACHE_DIR} \
+            bluez \
+            ffmpeg \
+            libturbojpeg \
+            libmariadb-dev-compat \
+            libxml2-utils
      - name: Check out code from GitHub
        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
        with:
          persist-credentials: false
-      - name: Install additional OS dependencies
-        timeout-minutes: 10
-        uses: ./.github/actions/cache-apt-packages
-        with:
-          packages: >-
-            bluez
-            ffmpeg
-            libturbojpeg
-            libmariadb-dev-compat
-            libxml2-utils
-          version: ${{ env.APT_CACHE_VERSION }}
-          execute_install_scripts: true
      - name: Set up Python ${{ matrix.python-version }}
        id: python
        uses: actions/setup-python@a309ff8b426b58ec0e2a45f0f869d46889d02405 # v6.2.0
@@ -1178,29 +1266,36 @@ jobs:
        python-version: ${{ fromJson(needs.info.outputs.python_versions) }}
        postgresql-group: ${{ fromJson(needs.info.outputs.postgresql_groups) }}
    steps:
+      - name: Restore apt cache
+        uses: actions/cache/restore@27d5ce7f107fe9357f9df03efb73ab90386fccae # v5.0.5
+        with:
+          path: |
+            ${{ env.APT_CACHE_DIR }}
+            ${{ env.APT_LIST_CACHE_DIR }}
+          fail-on-cache-miss: true
+          key: >-
+            ${{ runner.os }}-${{ runner.arch }}-${{ needs.info.outputs.apt_cache_key }}
+      - name: Install additional OS dependencies
+        timeout-minutes: 10
+        run: |
+          sudo rm /etc/apt/sources.list.d/microsoft-prod.list
+          sudo apt-get update \
+            -o Dir::Cache=${APT_CACHE_DIR} \
+            -o Dir::State::Lists=${APT_LIST_CACHE_DIR}
+          sudo apt-get -y install \
+            -o Dir::Cache=${APT_CACHE_DIR} \
+            -o Dir::State::Lists=${APT_LIST_CACHE_DIR} \
+            bluez \
+            ffmpeg \
+            libturbojpeg \
+            libxml2-utils
+          sudo /usr/share/postgresql-common/pgdg/apt.postgresql.org.sh -y
+          sudo apt-get -y install \
+            postgresql-server-dev-14
      - name: Check out code from GitHub
        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
        with:
          persist-credentials: false
-      - name: Install additional OS dependencies
-        timeout-minutes: 10
-        uses: ./.github/actions/cache-apt-packages
-        with:
-          packages: >-
-            bluez
-            ffmpeg
-            libturbojpeg
-            libxml2-utils
-          version: ${{ env.APT_CACHE_VERSION }}
-          execute_install_scripts: true
-      - name: Set up PostgreSQL apt repository
-        run: sudo /usr/share/postgresql-common/pgdg/apt.postgresql.org.sh -y
-      - name: Cache PostgreSQL development headers
-        timeout-minutes: 10
-        uses: ./.github/actions/cache-apt-packages
-        with:
-          packages: postgresql-server-dev-14
-          version: ${{ env.APT_CACHE_VERSION }}
      - name: Set up Python ${{ matrix.python-version }}
        id: python
        uses: actions/setup-python@a309ff8b426b58ec0e2a45f0f869d46889d02405 # v6.2.0
@@ -1354,21 +1449,33 @@ jobs:
        python-version: ${{ fromJson(needs.info.outputs.python_versions) }}
        group: ${{ fromJson(needs.info.outputs.test_groups) }}
    steps:
+      - name: Restore apt cache
+        uses: actions/cache/restore@27d5ce7f107fe9357f9df03efb73ab90386fccae # v5.0.5
+        with:
+          path: |
+            ${{ env.APT_CACHE_DIR }}
+            ${{ env.APT_LIST_CACHE_DIR }}
+          fail-on-cache-miss: true
+          key: >-
+            ${{ runner.os }}-${{ runner.arch }}-${{ needs.info.outputs.apt_cache_key }}
+      - name: Install additional OS dependencies
+        timeout-minutes: 10
+        run: |
+          sudo rm /etc/apt/sources.list.d/microsoft-prod.list
+          sudo apt-get update \
+            -o Dir::Cache=${APT_CACHE_DIR} \
+            -o Dir::State::Lists=${APT_LIST_CACHE_DIR}
+          sudo apt-get -y install \
+            -o Dir::Cache=${APT_CACHE_DIR} \
+            -o Dir::State::Lists=${APT_LIST_CACHE_DIR} \
+            bluez \
+            ffmpeg \
+            libturbojpeg \
+            libxml2-utils
      - name: Check out code from GitHub
        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
        with:
          persist-credentials: false
-      - name: Install additional OS dependencies
-        timeout-minutes: 10
-        uses: ./.github/actions/cache-apt-packages
-        with:
-          packages: >-
-            bluez
-            ffmpeg
-            libturbojpeg
-            libxml2-utils
-          version: ${{ env.APT_CACHE_VERSION }}
-          execute_install_scripts: true
      - name: Set up Python ${{ matrix.python-version }}
        id: python
        uses: actions/setup-python@a309ff8b426b58ec0e2a45f0f869d46889d02405 # v6.2.0
@@ -27,7 +27,7 @@ jobs:
      # - No PRs marked as no-stale
      # - No issues (-1)
      - name: 60 days stale PRs policy
-        uses: actions/stale@eb5cf3af3ac0a1aa4c9c45633dd1ae542a27a899 # v10.3.0
+        uses: actions/stale@b5d41d4e1d5dceea10e7104786b73624c18a190f # v10.2.0
        with:
          repo-token: ${{ secrets.GITHUB_TOKEN }}
          days-before-stale: 60
@@ -67,7 +67,7 @@ jobs:
      # - No issues marked as no-stale or help-wanted
      # - No PRs (-1)
      - name: 90 days stale issues
-        uses: actions/stale@eb5cf3af3ac0a1aa4c9c45633dd1ae542a27a899 # v10.3.0
+        uses: actions/stale@b5d41d4e1d5dceea10e7104786b73624c18a190f # v10.2.0
        with:
          repo-token: ${{ steps.token.outputs.token }}
          days-before-stale: 90
@@ -97,7 +97,7 @@ jobs:
      # - No Issues marked as no-stale or help-wanted
      # - No PRs (-1)
      - name: Needs more information stale issues policy
-        uses: actions/stale@eb5cf3af3ac0a1aa4c9c45633dd1ae542a27a899 # v10.3.0
+        uses: actions/stale@b5d41d4e1d5dceea10e7104786b73624c18a190f # v10.2.0
        with:
          repo-token: ${{ steps.token.outputs.token }}
          only-labels: "needs-more-information"
@@ -1,6 +1,6 @@
 repos:
  - repo: https://github.com/astral-sh/ruff-pre-commit
-    rev: v0.15.14
+    rev: v0.15.13
    hooks:
      - id: ruff-check
        args:
@@ -337,7 +337,6 @@ homeassistant.components.led_ble.*
 homeassistant.components.lektrico.*
 homeassistant.components.letpot.*
 homeassistant.components.lg_infrared.*
-homeassistant.components.lg_tv_rs232.*
 homeassistant.components.libre_hardware_monitor.*
 homeassistant.components.lidarr.*
 homeassistant.components.liebherr.*
@@ -429,7 +428,6 @@ homeassistant.components.otp.*
 homeassistant.components.ouman_eh_800.*
 homeassistant.components.overkiz.*
 homeassistant.components.overseerr.*
-homeassistant.components.ovhcloud_ai_endpoints.*
 homeassistant.components.p1_monitor.*
 homeassistant.components.paj_gps.*
 homeassistant.components.panel_custom.*
@@ -33,7 +33,6 @@ This repository contains the core of Home Assistant, a Python 3 based home autom
 - Avoid using conditions/branching in tests. Instead, either split tests or adjust the test parametrization to cover all cases without branching.
 - If multiple tests share most of their code, use `pytest.mark.parametrize` to merge them into a single parameterized test instead of duplicating the body. Use `pytest.param` with an `id` parameter to name the test cases clearly.
 - We use Syrupy for snapshot testing. Leverage `.ambr` snapshots instead of repetitive and exhaustive generation of test data within Python code itself.
- Hardcoded `entity_id`s in tests are fine. If the same one is repeated, use a constant.

 ## Good practices

@@ -987,8 +987,6 @@ CLAUDE.md @home-assistant/core
 /tests/components/lg_netcast/ @Drafteed @splinter98
 /homeassistant/components/lg_thinq/ @LG-ThinQ-Integration
 /tests/components/lg_thinq/ @LG-ThinQ-Integration
-/homeassistant/components/lg_tv_rs232/ @balloob
-/tests/components/lg_tv_rs232/ @balloob
 /homeassistant/components/libre_hardware_monitor/ @Sab44
 /tests/components/libre_hardware_monitor/ @Sab44
 /homeassistant/components/lichess/ @aryanhasgithub
@@ -1292,8 +1290,6 @@ CLAUDE.md @home-assistant/core
 /tests/components/openhome/ @bazwilliams
 /homeassistant/components/openrgb/ @felipecrs
 /tests/components/openrgb/ @felipecrs
-/homeassistant/components/opensensemap/ @AlCalzone
-/tests/components/opensensemap/ @AlCalzone
 /homeassistant/components/opensky/ @joostlek
 /tests/components/opensky/ @joostlek
 /homeassistant/components/opentherm_gw/ @mvn23
@@ -1321,8 +1317,6 @@ CLAUDE.md @home-assistant/core
 /tests/components/overkiz/ @imicknl
 /homeassistant/components/overseerr/ @joostlek @AmGarera
 /tests/components/overseerr/ @joostlek @AmGarera
-/homeassistant/components/ovhcloud_ai_endpoints/ @Crocmagnon
-/tests/components/ovhcloud_ai_endpoints/ @Crocmagnon
 /homeassistant/components/ovo_energy/ @timmo001
 /tests/components/ovo_energy/ @timmo001
 /homeassistant/components/p1_monitor/ @klaasnicolaas
@@ -2054,8 +2048,8 @@ CLAUDE.md @home-assistant/core
 /tests/components/yamaha_musiccast/ @vigonotion @micha91
 /homeassistant/components/yandex_transport/ @rishatik92 @devbis
 /tests/components/yandex_transport/ @rishatik92 @devbis
-/homeassistant/components/yardian/ @aeon-matrix
-/tests/components/yardian/ @aeon-matrix
+/homeassistant/components/yardian/ @h3l1o5
+/tests/components/yardian/ @h3l1o5
 /homeassistant/components/yeelight/ @zewelor @shenxn @starkillerOG @alexyao2015
 /tests/components/yeelight/ @zewelor @shenxn @starkillerOG @alexyao2015
 /homeassistant/components/yeelightsunflower/ @lindsaymarkward
@@ -7,7 +7,7 @@ from homeassistant.components.select import (
    PLATFORM_SCHEMA as SELECT_PLATFORM_SCHEMA,
    SelectEntity,
 )
-from homeassistant.const import CONF_NAME, CONF_OPTIONS
+from homeassistant.const import CONF_NAME
 from homeassistant.core import HomeAssistant
 from homeassistant.helpers import config_validation as cv
 from homeassistant.helpers.entity_platform import AddEntitiesCallback
@@ -19,6 +19,9 @@ from .hub import AdsHub

 DEFAULT_NAME = "ADS select"

+# pylint: disable-next=home-assistant-duplicate-const
+CONF_OPTIONS = "options"
+
 PLATFORM_SCHEMA = SELECT_PLATFORM_SCHEMA.extend(
    {
        vol.Required(CONF_ADS_VAR): cv.string,
@@ -1,7 +1,7 @@
 .trigger_common_fields:
  behavior: &trigger_behavior
    required: true
-    default: each
+    default: any
    selector:
      automation_behavior:
        mode: trigger
@@ -5,7 +5,7 @@
  fields: &trigger_common_fields
    behavior:
      required: true
-      default: each
+      default: any
      selector:
        automation_behavior:
          mode: trigger
@@ -17,7 +17,6 @@ PLATFORMS = [
    Platform.BINARY_SENSOR,
    Platform.BUTTON,
    Platform.EVENT,
-    Platform.MEDIA_PLAYER,
    Platform.NOTIFY,
    Platform.SENSOR,
    Platform.SWITCH,
@@ -41,7 +40,6 @@ async def async_setup_entry(hass: HomeAssistant, entry: AmazonConfigEntry) -> bo
    await coordinator.async_config_entry_first_refresh()

    await coordinator.sync_history_state()
-    await coordinator.sync_media_state()

    async def _on_http2_reauth_required() -> None:
        entry.async_start_reauth(hass)
@@ -8,12 +8,7 @@ from aioamazondevices.exceptions import (
    CannotConnect,
    CannotRetrieveData,
 )
-from aioamazondevices.structures import (
-    AmazonDevice,
-    AmazonMediaState,
-    AmazonVocalRecord,
-    AmazonVolumeState,
-)
+from aioamazondevices.structures import AmazonDevice, AmazonVocalRecord
 from aiohttp import ClientSession

 from homeassistant.config_entries import ConfigEntry
@@ -79,17 +74,10 @@ class AmazonDevicesCoordinator(DataUpdateCoordinator[dict[str, AmazonDevice]]):
        }

        self._vocal_records: dict[str, AmazonVocalRecord] = {}
+
        self.api.on_history_event.append(self.history_state_event_handler)
        self.api.on_history_event.freeze()

-        self._volume_states: dict[str, AmazonVolumeState] = {}
-        self.api.on_volume_state_event.append(self.volume_state_event_handler)
-        self.api.on_volume_state_event.freeze()
-
-        self._media_states: dict[str, AmazonMediaState] = {}
-        self.api.on_media_state_event.append(self.media_state_event_handler)
-        self.api.on_media_state_event.freeze()
-
    async def _async_update_data(self) -> dict[str, AmazonDevice]:
        """Update device data."""
        try:
@@ -201,31 +189,3 @@ class AmazonDevicesCoordinator(DataUpdateCoordinator[dict[str, AmazonDevice]]):
    def vocal_records(self) -> dict[str, AmazonVocalRecord]:
        """Vocal records of devices."""
        return self._vocal_records
-
-    async def sync_media_state(self) -> None:
-        """Sync media state."""
-        await self.api.sync_media_state()
-
-    async def media_state_event_handler(
-        self, media_state: dict[str, AmazonMediaState]
-    ) -> None:
-        """Handle pushed media state changed events."""
-        self._media_states = media_state
-        self.async_update_listeners()
-
-    @property
-    def media_states(self) -> dict[str, AmazonMediaState]:
-        """Media state of devices."""
-        return self._media_states
-
-    async def volume_state_event_handler(
-        self, volume_states: dict[str, AmazonVolumeState]
-    ) -> None:
-        """Handle pushed volume change events."""
-        self._volume_states = volume_states
-        self.async_update_listeners()
-
-    @property
-    def volume_states(self) -> dict[str, AmazonVolumeState]:
-        """Volumes of devices."""
-        return self._volume_states
@@ -1,294 +0,0 @@
-"""Media player platform for Alexa Devices."""
-
-from dataclasses import dataclass
-from datetime import datetime
-from typing import Any, Final
-
-from aioamazondevices.structures import (
-    AmazonMediaControls,
-    AmazonMediaState,
-    AmazonVolumeState,
-)
-
-from homeassistant.components.media_player import (
-    MediaPlayerDeviceClass,
-    MediaPlayerEnqueue,
-    MediaPlayerEntity,
-    MediaPlayerEntityDescription,
-    MediaPlayerEntityFeature,
-    MediaPlayerState,
-    MediaType,
-)
-from homeassistant.core import HomeAssistant
-from homeassistant.helpers.entity_platform import AddConfigEntryEntitiesCallback
-
-from .const import _LOGGER
-from .coordinator import AmazonConfigEntry, AmazonDevicesCoordinator
-from .entity import AmazonEntity
-from .utils import alexa_api_call
-
-PARALLEL_UPDATES = 1
-
-STANDARD_SUPPORTED_FEATURES = (
-    MediaPlayerEntityFeature.VOLUME_SET
-    | MediaPlayerEntityFeature.VOLUME_STEP
-    | MediaPlayerEntityFeature.VOLUME_MUTE
-    | MediaPlayerEntityFeature.STOP
-    | MediaPlayerEntityFeature.PLAY_MEDIA
-)
-
-
-@dataclass(frozen=True, kw_only=True)
-class AmazonDevicesMediaPlayerEntityDescription(MediaPlayerEntityDescription):
-    """Describes an Alexa Devices media player entity."""
-
-
-MEDIA_PLAYERS: Final = (
-    AmazonDevicesMediaPlayerEntityDescription(
-        key="media",
-    ),
-)
-
-
-async def async_setup_entry(
-    hass: HomeAssistant,
-    entry: AmazonConfigEntry,
-    async_add_entities: AddConfigEntryEntitiesCallback,
-) -> None:
-    """Set up Alexa Devices media player entities from a config entry."""
-    coordinator = entry.runtime_data
-
-    known_devices: set[str] = set()
-
-    def _check_device() -> None:
-        """Add entities for newly discovered devices."""
-        new_entities: list[AlexaDevicesMediaPlayer] = []
-
-        for serial_num, device in coordinator.data.items():
-            if serial_num in known_devices or not device.media_player_supported:
-                continue
-
-            known_devices.add(serial_num)
-            new_entities.extend(
-                AlexaDevicesMediaPlayer(coordinator, serial_num, description)
-                for description in MEDIA_PLAYERS
-            )
-
-        if new_entities:
-            async_add_entities(new_entities)
-
-    remove_listener = coordinator.async_add_listener(_check_device)
-    entry.async_on_unload(remove_listener)
-    _check_device()
-
-
-class AlexaDevicesMediaPlayer(AmazonEntity, MediaPlayerEntity):
-    """Representation of an Alexa device media player."""
-
-    entity_description: AmazonDevicesMediaPlayerEntityDescription
-
-    _attr_name = None  # Uses the device name
-    _attr_device_class = MediaPlayerDeviceClass.SPEAKER
-    _attr_volume_step = 0.05
-
-    def __init__(
-        self,
-        coordinator: AmazonDevicesCoordinator,
-        serial_num: str,
-        description: AmazonDevicesMediaPlayerEntityDescription,
-    ) -> None:
-        """Initialize."""
-        self._prev_volume: int | None = None
-        super().__init__(coordinator, serial_num, description)
-
-    @property
-    def media_state(self) -> AmazonMediaState | None:
-        """Return the media state relating to device."""
-        if not self.coordinator or not self.coordinator.media_states:
-            return None
-        return self.coordinator.media_states.get(self._serial_num)
-
-    @property
-    def volume_state(self) -> AmazonVolumeState | None:
-        """Volume settings for device."""
-        if not self.coordinator or not self.coordinator.volume_states:
-            return None
-        return self.coordinator.volume_states.get(self._serial_num)
-
-    @property
-    def supported_features(self) -> MediaPlayerEntityFeature:
-        """Return dynamically supported features based on current media."""
-        features = STANDARD_SUPPORTED_FEATURES
-
-        if self.media_state is None:
-            return features
-
-        if self.media_state.pause_enabled:
-            features |= MediaPlayerEntityFeature.PLAY | MediaPlayerEntityFeature.PAUSE
-
-        if self.media_state.next_enabled:
-            features |= MediaPlayerEntityFeature.NEXT_TRACK
-
-        if self.media_state.previous_enabled:
-            features |= MediaPlayerEntityFeature.PREVIOUS_TRACK
-
-        return features
-
-    @property
-    def state(self) -> MediaPlayerState | None:
-        """Return the current state of the player."""
-        if not self.media_state:
-            return MediaPlayerState.IDLE
-        if self.media_state.player_state == "PLAYING":
-            return MediaPlayerState.PLAYING
-        if self.media_state.player_state == "PAUSED":
-            return MediaPlayerState.PAUSED
-
-        return MediaPlayerState.IDLE
-
-    @property
-    def volume_level(self) -> float | None:
-        """Return the volume level (0.0 to 1.0)."""
-        if not self.volume_state or self.volume_state.volume is None:
-            return None
-        return self.volume_state.volume / 100
-
-    @property
-    def is_volume_muted(self) -> bool | None:
-        """Return True if the volume is muted."""
-        if not self.volume_state:
-            return None
-        return self.volume_state.volume == 0
-
-    @property
-    def media_title(self) -> str | None:
-        """Track title."""
-        if not self.media_state:
-            return None
-        return self.media_state.now_playing_title
-
-    @property
-    def media_artist(self) -> str | None:
-        """Artist name."""
-        if not self.media_state:
-            return None
-        return self.media_state.now_playing_line1
-
-    @property
-    def media_album_name(self) -> str | None:
-        """Album name."""
-        if not self.media_state:
-            return None
-        return self.media_state.now_playing_line2
-
-    @property
-    def media_image_url(self) -> str | None:
-        """Album art URL."""
-        if not self.media_state:
-            return None
-        return self.media_state.now_playing_url
-
-    @property
-    def media_duration(self) -> int | None:
-        """Duration in seconds."""
-        if not self.media_state:
-            return None
-        return self.media_state.media_length
-
-    @property
-    def media_position(self) -> int | None:
-        """Current playback position in seconds."""
-        if not self.media_state:
-            return None
-        return self.media_state.media_position
-
-    @property
-    def media_position_updated_at(self) -> datetime | None:
-        """When media_position was last updated — HA uses this to interpolate the progress bar."""
-        if not self.media_state:
-            return None
-        return self.media_state.media_position_updated_at
-
-    @property
-    def media_content_type(self) -> MediaType | None:
-        """Content type — tells HA what kind of media is playing."""
-        if self.state in [MediaPlayerState.PLAYING, MediaPlayerState.PAUSED]:
-            return MediaType.MUSIC
-        return None
-
-    async def async_play_media(
-        self,
-        media_type: MediaType | str,
-        media_id: str,
-        enqueue: MediaPlayerEnqueue | None = None,
-        announce: bool | None = None,
-        **kwargs: Any,
-    ) -> None:
-        """Play a piece of media."""
-        await self.async_call_alexa_music(media_id, media_type)
-
-    @alexa_api_call
-    async def async_call_alexa_music(
-        self, search_phrase: str, provider_id: str
-    ) -> None:
-        """Call alexa music."""
-        await self.coordinator.api.call_alexa_music(
-            self.device, search_phrase, provider_id
-        )
-
-    @alexa_api_call
-    async def async_set_device_volume(self, volume: int) -> None:
-        """Set the device volume."""
-        _LOGGER.debug(
-            "Setting volume for %s to %s%%",
-            self.device.serial_number,
-            volume,
-        )
-        await self.coordinator.api.set_device_volume(self.device, volume)
-
-    async def async_set_volume_level(self, volume: float) -> None:
-        """Set the volume level (0.0 to 1.0)."""
-        device_volume = round(volume * 100)
-        await self.async_set_device_volume(device_volume)
-
-    async def async_mute_volume(self, mute: bool) -> None:
-        """Mute or un-mute the volume."""
-        # Whilst you can mute a device by asking it there appears to be
-        # no way to do this programmatically so set volume to 0
-        if not self.volume_state or self.volume_state.volume is None:
-            return
-        if mute:
-            self._prev_volume = self.volume_state.volume
-            target_volume = 0
-        else:
-            if self._prev_volume is None:
-                return
-            target_volume = self._prev_volume
-        await self.async_set_volume_level(target_volume / 100)
-
-    @alexa_api_call
-    async def _send_media_command(self, command: AmazonMediaControls) -> None:
-        _LOGGER.debug(
-            "Sending media command '%s' to %s", command, self.device.serial_number
-        )
-        await self.coordinator.api.send_media_command(self.device, command)
-
-    async def async_media_stop(self) -> None:
-        """Send stop command."""
-        await self._send_media_command(AmazonMediaControls.Stop)
-
-    async def async_media_pause(self) -> None:
-        """Send pause command."""
-        await self._send_media_command(AmazonMediaControls.Pause)
-
-    async def async_media_play(self) -> None:
-        """Send play command."""
-        await self._send_media_command(AmazonMediaControls.Play)
-
-    async def async_media_next_track(self) -> None:
-        """Send next track command."""
-        await self._send_media_command(AmazonMediaControls.Next)
-
-    async def async_media_previous_track(self) -> None:
-        """Send previous track command."""
-        await self._send_media_command(AmazonMediaControls.Previous)
@@ -230,13 +230,13 @@ async def async_migrate_entry(hass: HomeAssistant, entry: AnthropicConfigEntry)

    if entry.version == 2 and entry.minor_version == 3:
        # Remove Temperature parameter
-        temperature_key = "temperature"
+        CONF_TEMPERATURE = "temperature"

        for subentry in entry.subentries.values():
            data = subentry.data.copy()
-            if temperature_key not in data:
+            if CONF_TEMPERATURE not in data:
                continue
-            data.pop(temperature_key, None)
+            data.pop(CONF_TEMPERATURE, None)
            hass.config_entries.async_update_subentry(entry, subentry, data=data)

        hass.config_entries.async_update_entry(entry, minor_version=4)
@@ -7,3 +7,27 @@ CONNECTION_TIMEOUT: int = 10

 # Field name of last self test retrieved from apcupsd.
 LAST_S_TEST: Final = "laststest"
+
+# Mapping of deprecated sensor keys (as reported by apcupsd,
+# lower-cased) to their deprecation
+# repair issue translation keys.
+DEPRECATED_SENSORS: Final = {
+    "apc": "apc_deprecated",
+    "end apc": "date_deprecated",
+    "date": "date_deprecated",
+    "apcmodel": "available_via_device_info",
+    "model": "available_via_device_info",
+    "firmware": "available_via_device_info",
+    "version": "available_via_device_info",
+    "upsname": "available_via_device_info",
+    "serialno": "available_via_device_info",
+}
+
+AVAILABLE_VIA_DEVICE_ATTR: Final = {
+    "apcmodel": "model",
+    "model": "model",
+    "firmware": "hw_version",
+    "version": "sw_version",
+    "upsname": "name",
+    "serialno": "serial_number",
+}
@@ -1,10 +1,11 @@
 """Support for APCUPSd sensors."""

 import logging
-from typing import Final

 import dateutil

+from homeassistant.components.automation import automations_with_entity
+from homeassistant.components.script import scripts_with_entity
 from homeassistant.components.sensor import (
    SensorDeviceClass,
    SensorEntity,
@@ -23,9 +24,11 @@ from homeassistant.const import (
    UnitOfTime,
 )
 from homeassistant.core import HomeAssistant, callback
+from homeassistant.helpers import entity_registry as er
 from homeassistant.helpers.entity_platform import AddConfigEntryEntitiesCallback
+import homeassistant.helpers.issue_registry as ir

-from .const import LAST_S_TEST
+from .const import AVAILABLE_VIA_DEVICE_ATTR, DEPRECATED_SENSORS, DOMAIN, LAST_S_TEST
 from .coordinator import APCUPSdConfigEntry, APCUPSdCoordinator
 from .entity import APCUPSdEntity

@@ -33,20 +36,6 @@ PARALLEL_UPDATES = 0

 _LOGGER = logging.getLogger(__name__)

-# List of useless sensors to ignore, since they are either provided in device
-# information, or not useful at all
-IGNORED_SENSORS: Final = {
-    "apc",
-    "end apc",
-    "date",
-    "apcmodel",
-    "model",
-    "firmware",
-    "version",
-    "upsname",
-    "serialno",
-}
-
 SENSORS: dict[str, SensorEntityDescription] = {
    "alarmdel": SensorEntityDescription(
        key="alarmdel",
@@ -60,6 +49,18 @@ SENSORS: dict[str, SensorEntityDescription] = {
        device_class=SensorDeviceClass.TEMPERATURE,
        state_class=SensorStateClass.MEASUREMENT,
    ),
+    "apc": SensorEntityDescription(
+        key="apc",
+        translation_key="apc_status",
+        entity_registry_enabled_default=False,
+        entity_category=EntityCategory.DIAGNOSTIC,
+    ),
+    "apcmodel": SensorEntityDescription(
+        key="apcmodel",
+        translation_key="apc_model",
+        entity_registry_enabled_default=False,
+        entity_category=EntityCategory.DIAGNOSTIC,
+    ),
    "badbatts": SensorEntityDescription(
        key="badbatts",
        translation_key="bad_batteries",
@@ -99,6 +100,12 @@ SENSORS: dict[str, SensorEntityDescription] = {
        state_class=SensorStateClass.TOTAL_INCREASING,
        device_class=SensorDeviceClass.DURATION,
    ),
+    "date": SensorEntityDescription(
+        key="date",
+        translation_key="date",
+        entity_registry_enabled_default=False,
+        entity_category=EntityCategory.DIAGNOSTIC,
+    ),
    "dipsw": SensorEntityDescription(
        key="dipsw",
        translation_key="dip_switch_settings",
@@ -125,11 +132,23 @@ SENSORS: dict[str, SensorEntityDescription] = {
        translation_key="wake_delay",
        entity_category=EntityCategory.DIAGNOSTIC,
    ),
+    "end apc": SensorEntityDescription(
+        key="end apc",
+        translation_key="date_and_time",
+        entity_registry_enabled_default=False,
+        entity_category=EntityCategory.DIAGNOSTIC,
+    ),
    "extbatts": SensorEntityDescription(
        key="extbatts",
        translation_key="external_batteries",
        entity_category=EntityCategory.DIAGNOSTIC,
    ),
+    "firmware": SensorEntityDescription(
+        key="firmware",
+        translation_key="firmware_version",
+        entity_registry_enabled_default=False,
+        entity_category=EntityCategory.DIAGNOSTIC,
+    ),
    "hitrans": SensorEntityDescription(
        key="hitrans",
        translation_key="transfer_high",
@@ -245,6 +264,12 @@ SENSORS: dict[str, SensorEntityDescription] = {
        translation_key="min_time",
        entity_category=EntityCategory.DIAGNOSTIC,
    ),
+    "model": SensorEntityDescription(
+        key="model",
+        translation_key="model",
+        entity_registry_enabled_default=False,
+        entity_category=EntityCategory.DIAGNOSTIC,
+    ),
    "nombattv": SensorEntityDescription(
        key="nombattv",
        translation_key="battery_nominal_voltage",
@@ -333,6 +358,12 @@ SENSORS: dict[str, SensorEntityDescription] = {
        entity_registry_enabled_default=False,
        entity_category=EntityCategory.DIAGNOSTIC,
    ),
+    "serialno": SensorEntityDescription(
+        key="serialno",
+        translation_key="serial_number",
+        entity_registry_enabled_default=False,
+        entity_category=EntityCategory.DIAGNOSTIC,
+    ),
    "starttime": SensorEntityDescription(
        key="starttime",
        translation_key="startup_time",
@@ -373,6 +404,18 @@ SENSORS: dict[str, SensorEntityDescription] = {
        translation_key="ups_mode",
        entity_category=EntityCategory.DIAGNOSTIC,
    ),
+    "upsname": SensorEntityDescription(
+        key="upsname",
+        translation_key="ups_name",
+        entity_registry_enabled_default=False,
+        entity_category=EntityCategory.DIAGNOSTIC,
+    ),
+    "version": SensorEntityDescription(
+        key="version",
+        translation_key="version",
+        entity_registry_enabled_default=False,
+        entity_category=EntityCategory.DIAGNOSTIC,
+    ),
    "xoffbat": SensorEntityDescription(
        key="xoffbat",
        translation_key="transfer_from_battery",
@@ -438,10 +481,9 @@ async def async_setup_entry(
    # as unknown initially.
    #
    # We also sort the resources to ensure the order of entities
-    # created is deterministic
+    # created is deterministic since "APCMODEL" and "MODEL"
+    # resources map to the same "Model" name.
    for resource in sorted(available_resources | {LAST_S_TEST}):
-        if resource in IGNORED_SENSORS:
-            continue
        if resource not in SENSORS:
            _LOGGER.warning("Invalid resource from APCUPSd: %s", resource.upper())
            continue
@@ -519,3 +561,63 @@ class APCUPSdSensor(APCUPSdEntity, SensorEntity):
        self._attr_native_value, inferred_unit = infer_unit(data)
        if not self.native_unit_of_measurement:
            self._attr_native_unit_of_measurement = inferred_unit
+
+    async def async_added_to_hass(self) -> None:
+        """Handle when entity is added to Home Assistant.
+
+        If this is a deprecated sensor entity, create a repair issue to guide
+        the user to disable it.
+        """
+        await super().async_added_to_hass()
+
+        if not self.enabled:
+            return
+
+        reason = DEPRECATED_SENSORS.get(self.entity_description.key)
+        if not reason:
+            return
+
+        automations = automations_with_entity(self.hass, self.entity_id)
+        scripts = scripts_with_entity(self.hass, self.entity_id)
+        if not automations and not scripts:
+            return
+
+        entity_registry = er.async_get(self.hass)
+        items = [
+            f"- [{entry.name or entry.original_name or entity_id}]"
+            f"(/config/{integration}/edit/"
+            f"{entry.unique_id or entity_id.split('.', 1)[-1]})"
+            for integration, entities in (
+                ("automation", automations),
+                ("script", scripts),
+            )
+            for entity_id in entities
+            if (entry := entity_registry.async_get(entity_id))
+        ]
+        placeholders = {
+            "entity_name": str(self.name or self.entity_id),
+            "entity_id": self.entity_id,
+            "items": "\n".join(items),
+        }
+        if via_attr := AVAILABLE_VIA_DEVICE_ATTR.get(self.entity_description.key):
+            placeholders["available_via_device_attr"] = via_attr
+        if device_entry := self.device_entry:
+            placeholders["device_id"] = device_entry.id
+
+        ir.async_create_issue(
+            self.hass,
+            DOMAIN,
+            f"{reason}_{self.entity_id}",
+            breaks_in_ha_version="2026.6.0",
+            is_fixable=False,
+            severity=ir.IssueSeverity.WARNING,
+            translation_key=reason,
+            translation_placeholders=placeholders,
+        )
+
+    async def async_will_remove_from_hass(self) -> None:
+        """Handle when entity will be removed from Home Assistant."""
+        await super().async_will_remove_from_hass()
+
+        if issue_key := DEPRECATED_SENSORS.get(self.entity_description.key):
+            ir.async_delete_issue(self.hass, DOMAIN, f"{issue_key}_{self.entity_id}")
@@ -241,5 +241,19 @@
    "cannot_connect": {
      "message": "Cannot connect to APC UPS Daemon."
    }
+  },
+  "issues": {
+    "apc_deprecated": {
+      "description": "The {entity_name} sensor (`{entity_id}`) is deprecated because it exposes internal details of the APC UPS Daemon response.\n\nIt is still referenced in the following automations or scripts:\n{items}\n\nUpdate those automations or scripts to use supported APC UPS entities instead. Reload the APC UPS Daemon integration afterwards to resolve this issue.",
+      "title": "{entity_name} sensor is deprecated"
+    },
+    "available_via_device_info": {
+      "description": "The {entity_name} sensor (`{entity_id}`) is deprecated because the same value is available from the device registry via `device_attr(\"{device_id}\", \"{available_via_device_attr}\")`.\n\nIt is still referenced in the following automations or scripts:\n{items}\n\nUpdate those automations or scripts to use the `device_attr` helper instead of this sensor. Reload the APC UPS Daemon integration afterwards to resolve this issue.",
+      "title": "{entity_name} sensor is deprecated"
+    },
+    "date_deprecated": {
+      "description": "The {entity_name} sensor (`{entity_id}`) is deprecated because the timestamp is already available from other APC UPS sensors via their last updated time.\n\nIt is still referenced in the following automations or scripts:\n{items}\n\nUpdate those automations or scripts to reference any entity's `last_updated` attribute instead (for example, `states.binary_sensor.apcups_online_status.last_updated`). Reload the APC UPS Daemon integration afterwards to resolve this issue.",
+      "title": "{entity_name} sensor is deprecated"
+    }
  }
 }
@@ -5,7 +5,7 @@
  fields:
    behavior:
      required: true
-      default: each
+      default: any
      selector:
        automation_behavior:
          mode: trigger
@@ -49,20 +49,6 @@ SENSORS_TYPE_COUNT = "sensors_count"

 _LOGGER = logging.getLogger(__name__)

-_ENTITY_MIGRATION_ID = {
-    "sensor_connected_device": "Devices Connected",
-    "sensor_rx_bytes": "Download",
-    "sensor_tx_bytes": "Upload",
-    "sensor_rx_rates": "Download Speed",
-    "sensor_tx_rates": "Upload Speed",
-    "sensor_load_avg1": "Load Avg (1m)",
-    "sensor_load_avg5": "Load Avg (5m)",
-    "sensor_load_avg15": "Load Avg (15m)",
-    "2.4GHz": "2.4GHz Temperature",
-    "5.0GHz": "5GHz Temperature",
-    "CPU": "CPU Temperature",
-}
-

 class AsusWrtSensorDataHandler:
    """Data handler for AsusWrt sensor."""
@@ -201,6 +187,20 @@ class AsusWrtRouter:

    def _migrate_entities_unique_id(self) -> None:
        """Migrate router entities to new unique id format."""
+        _ENTITY_MIGRATION_ID = {
+            "sensor_connected_device": "Devices Connected",
+            "sensor_rx_bytes": "Download",
+            "sensor_tx_bytes": "Upload",
+            "sensor_rx_rates": "Download Speed",
+            "sensor_tx_rates": "Upload Speed",
+            "sensor_load_avg1": "Load Avg (1m)",
+            "sensor_load_avg5": "Load Avg (5m)",
+            "sensor_load_avg15": "Load Avg (15m)",
+            "2.4GHz": "2.4GHz Temperature",
+            "5.0GHz": "5GHz Temperature",
+            "CPU": "CPU Temperature",
+        }
+
        entity_reg = er.async_get(self.hass)
        router_entries = er.async_entries_for_config_entry(
            entity_reg, self._entry.entry_id
@@ -51,6 +51,7 @@ async def async_setup_entry(hass: HomeAssistant, entry: S3ConfigEntry) -> bool:
                translation_key="invalid_bucket_name",
            ) from err
    except ValueError as err:
+        # pylint: disable-next=home-assistant-exception-translation-key-missing
        raise ConfigEntryError(
            translation_domain=DOMAIN,
            translation_key="invalid_endpoint_url",
@@ -7,7 +7,7 @@
      "cannot_connect": "[%key:component::aws_s3::exceptions::cannot_connect::message%]",
      "invalid_bucket_name": "[%key:component::aws_s3::exceptions::invalid_bucket_name::message%]",
      "invalid_credentials": "[%key:component::aws_s3::exceptions::invalid_credentials::message%]",
-      "invalid_endpoint_url": "[%key:component::aws_s3::exceptions::invalid_endpoint_url::message%]"
+      "invalid_endpoint_url": "Invalid endpoint URL. Please make sure it's a valid AWS S3 endpoint URL."
    },
    "step": {
      "user": {
@@ -48,9 +48,6 @@
    },
    "invalid_credentials": {
      "message": "Bucket cannot be accessed using provided combination of access key ID and secret access key."
-    },
-    "invalid_endpoint_url": {
-      "message": "Invalid endpoint URL. Please make sure it's a valid AWS S3 endpoint URL."
    }
  }
 }
@@ -1,7 +1,7 @@
 .trigger_common_fields:
  behavior: &trigger_behavior
    required: true
-    default: each
+    default: any
    selector:
      automation_behavior:
        mode: trigger
@@ -20,7 +20,7 @@
    "bluetooth-adapters==2.3.0",
    "bluetooth-auto-recovery==1.6.4",
    "bluetooth-data-tools==1.29.18",
-    "dbus-fast==5.0.15",
-    "habluetooth==6.7.9"
+    "dbus-fast==5.0.14",
+    "habluetooth==6.7.4"
  ]
 }
@@ -32,16 +32,8 @@ OPTIONS_SCHEMA = KNOWN_HOSTS_SCHEMA.extend(
        vol.Required(CONF_MORE_OPTIONS): section(
            vol.Schema(
                {
-                    vol.Optional(CONF_UUID): SelectSelector(
-                        SelectSelectorConfig(
-                            custom_value=True, options=[], multiple=True
-                        ),
-                    ),
-                    vol.Optional(CONF_IGNORE_CEC): SelectSelector(
-                        SelectSelectorConfig(
-                            custom_value=True, options=[], multiple=True
-                        ),
-                    ),
+                    vol.Optional(CONF_UUID): str,
+                    vol.Optional(CONF_IGNORE_CEC): str,
                }
            ),
            SectionConfig(collapsed=True),
@@ -117,11 +109,13 @@ class CastOptionsFlowHandler(OptionsFlow):
    ) -> ConfigFlowResult:
        """Manage the Google Cast options."""
        if user_input is not None:
-            ignore_cec = _trim_items(
-                user_input[CONF_MORE_OPTIONS].get(CONF_IGNORE_CEC, [])
+            ignore_cec = _string_to_list(
+                user_input[CONF_MORE_OPTIONS].get(CONF_IGNORE_CEC, "")
            )
            known_hosts = _trim_items(user_input.get(CONF_KNOWN_HOSTS, []))
-            wanted_uuid = _trim_items(user_input[CONF_MORE_OPTIONS].get(CONF_UUID, []))
+            wanted_uuid = _string_to_list(
+                user_input[CONF_MORE_OPTIONS].get(CONF_UUID, "")
+            )
            updated_config = dict(self.config_entry.data)
            updated_config[CONF_IGNORE_CEC] = ignore_cec
            updated_config[CONF_KNOWN_HOSTS] = known_hosts
@@ -138,7 +132,9 @@ class CastOptionsFlowHandler(OptionsFlow):
        for key in (CONF_UUID, CONF_IGNORE_CEC):
            if key not in self.config_entry.data:
                continue
-            suggested[CONF_MORE_OPTIONS][key] = self.config_entry.data[key]
+            suggested[CONF_MORE_OPTIONS][key] = _list_to_string(
+                self.config_entry.data[key]
+            )

        return self.async_show_form(
            step_id="init",
@@ -147,5 +143,16 @@ class CastOptionsFlowHandler(OptionsFlow):
        )


+def _list_to_string(items: list[str]) -> str:
+    comma_separated_string = ""
+    if items:
+        comma_separated_string = ",".join(items)
+    return comma_separated_string
+
+
+def _string_to_list(string: str) -> list[str]:
+    return [x.strip() for x in string.split(",") if x.strip()]
+
+
 def _trim_items(items: list[str]) -> list[str]:
    return [x.strip() for x in items if x.strip()]
@@ -1,57 +0,0 @@
-"""Diagnostics for the cert_expiry integration."""
-
-from typing import Any
-
-from homeassistant.components.diagnostics import async_redact_data
-from homeassistant.const import CONF_HOST
-from homeassistant.core import HomeAssistant
-
-from .coordinator import CertExpiryConfigEntry
-
-TO_REDACT = {CONF_HOST, "name", "title", "unique_id"}
-
-
-async def async_get_config_entry_diagnostics(
-    _hass: HomeAssistant,
-    entry: CertExpiryConfigEntry,
-) -> dict[str, Any]:
-    """Return diagnostics for a config entry."""
-    entry_diagnostics = entry.as_dict()
-
-    coordinator = getattr(entry, "runtime_data", None)
-
-    coordinator_diagnostics: dict[str, Any] = {
-        "host": None,
-        "port": None,
-        "name": None,
-        "expiry_datetime": None,
-        "is_cert_valid": None,
-        "cert_error": None,
-        "last_update_success": None,
-    }
-
-    if coordinator is not None:
-        expiry = coordinator.data.isoformat() if coordinator.data else None
-        cert_error = (
-            (
-                f"{type(coordinator.cert_error).__module__}."
-                f"{type(coordinator.cert_error).__qualname__}"
-            )
-            if coordinator.cert_error
-            else None
-        )
-
-        coordinator_diagnostics = {
-            "host": coordinator.host,
-            "port": coordinator.port,
-            "name": coordinator.name,
-            "expiry_datetime": expiry,
-            "is_cert_valid": coordinator.is_cert_valid,
-            "cert_error": cert_error,
-            "last_update_success": coordinator.last_update_success,
-        }
-
-    return {
-        "entry": async_redact_data(entry_diagnostics, TO_REDACT),
-        "coordinator": async_redact_data(coordinator_diagnostics, TO_REDACT),
-    }
@@ -1,81 +0,0 @@
-rules:
-  # Bronze
-  action-setup:
-    status: exempt
-    comment: Integration does not register custom actions.
-  appropriate-polling:
-    status: done
-    comment: Certificates are checked every 12 hours via DataUpdateCoordinator.
-  brands: done
-  common-modules: done
-  config-flow-test-coverage:
-    status: done
-    comment: test_abort_on_socket_failed can be parametrized and should end in CREATE_ENTRY to test flow recovery.
-  config-flow: done
-  dependency-transparency:
-    status: exempt
-    comment: Integration has no external library dependencies.
-  docs-actions:
-    status: exempt
-    comment: Integration does not register custom actions.
-  docs-high-level-description: done
-  docs-installation-instructions: done
-  docs-removal-instructions: done
-  entity-event-setup:
-    status: exempt
-    comment: Integration does not subscribe to events.
-  entity-unique-id: done
-  has-entity-name: done
-  runtime-data: done
-  test-before-configure: done
-  test-before-setup: todo
-  unique-config-entry: done
-  # Silver
-  action-exceptions:
-    status: exempt
-    comment: Integration does not register custom actions.
-  config-entry-unloading: done
-  docs-configuration-parameters: todo
-  docs-installation-parameters: todo
-  entity-unavailable: done
-  integration-owner: done
-  log-when-unavailable: done
-  parallel-updates: todo
-  reauthentication-flow:
-    status: exempt
-    comment: Config flow only collects host/port; the integration does not authenticate.
-  test-coverage:
-    status: todo
-    comment: Consider creating a mock_config_entry fixture and use that throughout tests.
-  # Gold
-  devices: done
-  diagnostics: todo
-  discovery: todo
-  discovery-update-info: todo
-  docs-data-update: todo
-  docs-examples: todo
-  docs-known-limitations: todo
-  docs-supported-devices: todo
-  docs-supported-functions: todo
-  docs-troubleshooting: todo
-  docs-use-cases: todo
-  dynamic-devices:
-    status: exempt
-    comment: Integration supports a single device per config entry.
-  entity-category:
-    status: todo
-    comment: Extra state attributes (is_valid, error) should be moved to separate entities in the future.
-  entity-device-class: done
-  entity-disabled-by-default: todo
-  entity-translations: done
-  exception-translations: todo
-  icon-translations: todo
-  reconfiguration-flow: done
-  repair-issues: todo
-  stale-devices:
-    status: exempt
-    comment: Integration supports a single device per config entry.
-  # Platinum
-  async-dependency: todo
-  inject-websession: todo
-  strict-typing: todo
@@ -16,10 +16,6 @@
          "host": "[%key:common::config_flow::data::host%]",
          "port": "[%key:common::config_flow::data::port%]"
        },
-        "data_description": {
-          "host": "The hostname or IP address of the server to monitor.",
-          "port": "The port to connect to on the server."
-        },
        "title": "Reconfigure the certificate to test"
      },
      "user": {
@@ -28,10 +24,6 @@
          "name": "The name of the certificate",
          "port": "[%key:common::config_flow::data::port%]"
        },
-        "data_description": {
-          "host": "The hostname or IP address of the server to monitor.",
-          "port": "The port to connect to on the server."
-        },
        "title": "Define the certificate to test"
      }
    }
@@ -7,7 +7,7 @@ from homeassistant.core import HomeAssistant, State
 from homeassistant.helpers import config_validation as cv
 from homeassistant.helpers.automation import DomainSpec
 from homeassistant.helpers.trigger import (
-    ENTITY_STATE_TRIGGER_SCHEMA_WITH_BEHAVIOR,
+    ENTITY_STATE_TRIGGER_SCHEMA_FIRST_LAST,
    EntityNumericalStateChangedTriggerBase,
    EntityNumericalStateChangedTriggerWithUnitBase,
    EntityNumericalStateCrossedThresholdTriggerBase,
@@ -26,7 +26,7 @@ from .const import ATTR_HUMIDITY, ATTR_HVAC_ACTION, DOMAIN, HVACAction, HVACMode

 CONF_HVAC_MODE = "hvac_mode"

-HVAC_MODE_CHANGED_TRIGGER_SCHEMA = ENTITY_STATE_TRIGGER_SCHEMA_WITH_BEHAVIOR.extend(
+HVAC_MODE_CHANGED_TRIGGER_SCHEMA = ENTITY_STATE_TRIGGER_SCHEMA_FIRST_LAST.extend(
    {
        vol.Required(CONF_OPTIONS): {
            vol.Required(CONF_HVAC_MODE): vol.All(
@@ -5,7 +5,7 @@
  fields:
    behavior: &trigger_behavior
      required: true
-      default: each
+      default: any
      selector:
        automation_behavior:
          mode: trigger
@@ -175,6 +175,7 @@ class ConfigManagerFlowIndexView(
        vol.Schema(
            {
                vol.Required("handler"): vol.Any(str, list),
+                vol.Optional("show_advanced_options", default=False): cv.boolean,
                vol.Optional("entry_id"): cv.string,
            },
            extra=vol.ALLOW_EXTRA,
@@ -301,6 +302,7 @@ class SubentryManagerFlowIndexView(
        vol.Schema(
            {
                vol.Required("handler"): vol.All(vol.Coerce(tuple), (str, str)),
+                vol.Optional("show_advanced_options", default=False): cv.boolean,
            },
            extra=vol.ALLOW_EXTRA,
        )
@@ -5,7 +5,7 @@
  fields:
    behavior:
      required: true
-      default: each
+      default: any
      selector:
        automation_behavior:
          mode: trigger
@@ -1,7 +1,7 @@
 .trigger_common_fields: &trigger_common_fields
  behavior:
    required: true
-    default: each
+    default: any
    selector:
      automation_behavior:
        mode: trigger
@@ -6,6 +6,6 @@
  "documentation": "https://www.home-assistant.io/integrations/data_grand_lyon",
  "integration_type": "service",
  "iot_class": "cloud_polling",
-  "quality_scale": "platinum",
+  "quality_scale": "silver",
  "requirements": ["data-grand-lyon-ha==0.7.0"]
 }
@@ -49,15 +49,13 @@ rules:
    status: exempt
    comment: This is a service integration; there are no discoverable devices.
  docs-data-update: done
-  docs-examples: done
+  docs-examples: todo
  docs-known-limitations: done
  docs-supported-devices: done
  docs-supported-functions: done
  docs-troubleshooting: done
  docs-use-cases: done
-  dynamic-devices:
-    status: exempt
-    comment: This is a service integration; devices are added and removed manually by the user.
+  dynamic-devices: done
  entity-category: done
  entity-device-class: done
  entity-disabled-by-default: done
@@ -68,9 +66,7 @@ rules:
  repair-issues:
    status: exempt
    comment: no known use cases for repair issues or flows, yet
-  stale-devices:
-    status: exempt
-    comment: This is a service integration; devices are added and removed manually by the user.
+  stale-devices: done

  # Platinum
  async-dependency: done
@@ -22,7 +22,6 @@ from .const import (  # noqa: F401
    ATTR_LOCATION_NAME,
    ATTR_MAC,
    ATTR_SOURCE_TYPE,
-    CONF_ASSOCIATED_ZONE,
    CONF_CONSIDER_HOME,
    CONF_NEW_DEVICE_DEFAULTS,
    CONF_SCAN_INTERVAL,
@@ -36,8 +36,6 @@ DEFAULT_CONSIDER_HOME: Final = timedelta(seconds=180)

 CONF_NEW_DEVICE_DEFAULTS: Final = "new_device_defaults"

-CONF_ASSOCIATED_ZONE: Final = "associated_zone"
-
 ATTR_ATTRIBUTES: Final = "attributes"
 ATTR_BATTERY: Final = "battery"
 ATTR_DEV_ID: Final = "dev_id"
@@ -1,7 +1,7 @@
 """Provide functionality to keep track of devices."""

 import asyncio
-from typing import TYPE_CHECKING, Any, final
+from typing import Any, final

 from propcache.api import cached_property

@@ -16,19 +16,8 @@ from homeassistant.const import (
    STATE_NOT_HOME,
    EntityCategory,
 )
-from homeassistant.core import (
-    CALLBACK_TYPE,
-    Event,
-    EventStateChangedData,
-    HomeAssistant,
-    State,
-    callback,
-)
-from homeassistant.helpers import (
-    device_registry as dr,
-    entity_registry as er,
-    issue_registry as ir,
-)
+from homeassistant.core import Event, HomeAssistant, State, callback
+from homeassistant.helpers import device_registry as dr, entity_registry as er
 from homeassistant.helpers.device_registry import (
    DeviceInfo,
    EventDeviceRegistryUpdatedData,
@@ -36,7 +25,6 @@ from homeassistant.helpers.device_registry import (
 from homeassistant.helpers.dispatcher import async_dispatcher_send
 from homeassistant.helpers.entity import Entity, EntityDescription
 from homeassistant.helpers.entity_platform import EntityPlatform
-from homeassistant.helpers.event import async_track_state_change_event
 from homeassistant.util.hass_dict import HassKey

 from .const import (
@@ -45,7 +33,6 @@ from .const import (
    ATTR_IP,
    ATTR_MAC,
    ATTR_SOURCE_TYPE,
-    CONF_ASSOCIATED_ZONE,
    CONNECTED_DEVICE_REGISTERED,
    DOMAIN,
    LOGGER,
@@ -234,8 +221,8 @@ class TrackerEntity(
        """Return the entity_id of zones the device is currently in.

        The list may be in any order; the base class sorts it by zone radius
-        and discards zones which do not exist. Takes precedence over latitude
-        and longitude when set (including when set to an empty list).
+        and discards zones which do not exist. Ignored if latitude and
+        longitude are both set.
        """
        return self._attr_in_zones

@@ -265,7 +252,11 @@ class TrackerEntity(
    @callback
    def _async_write_ha_state(self) -> None:
        """Calculate active zones."""
-        if (zones := self.in_zones) is not None:
+        if self.available and self.latitude is not None and self.longitude is not None:
+            self.__active_zone, self.__in_zones = zone.async_in_zones(
+                self.hass, self.latitude, self.longitude, self.location_accuracy
+            )
+        elif (zones := self.in_zones) is not None:
            zone_states = sorted(
                (
                    zone_state
@@ -279,12 +270,6 @@ class TrackerEntity(
                None,
            )
            self.__in_zones = [z.entity_id for z in zone_states]
-        elif (
-            self.available and self.latitude is not None and self.longitude is not None
-        ):
-            self.__active_zone, self.__in_zones = zone.async_in_zones(
-                self.hass, self.latitude, self.longitude, self.location_accuracy
-            )
        else:
            self.__active_zone = None
            self.__in_zones = None
@@ -332,120 +317,14 @@ class BaseScannerEntity(BaseTrackerEntity):
    addresses being used to identify the device.
    """

-    _scanner_option_associated_zone: str = zone.ENTITY_ID_HOME
-    _scanner_option_associated_zone_unsub: CALLBACK_TYPE | None = None
-
-    async def async_internal_added_to_hass(self) -> None:
-        """Call when the scanner entity is added to hass."""
-        await super().async_internal_added_to_hass()
-        if not self.registry_entry:
-            return
-        self._async_read_entity_options()
-
-    async def async_internal_will_remove_from_hass(self) -> None:
-        """Call when the scanner entity is about to be removed from hass."""
-        await super().async_internal_will_remove_from_hass()
-        if not self.registry_entry:
-            return
-        if self._scanner_option_associated_zone_unsub is not None:
-            self._scanner_option_associated_zone_unsub()
-            self._scanner_option_associated_zone_unsub = None
-        self._async_clear_associated_zone_issue()
-
-    @callback
-    def async_registry_entry_updated(self) -> None:
-        """Run when the entity registry entry has been updated."""
-        self._async_read_entity_options()
-
-    @callback
-    def _async_read_entity_options(self) -> None:
-        """Read entity options from the entity registry.
-
-        Called when the entity registry entry has been updated and before the
-        scanner entity is added to the state machine.
-        """
-        assert self.registry_entry
-        if (scanner_options := self.registry_entry.options.get(DOMAIN)) and (
-            associated_zone := scanner_options.get(CONF_ASSOCIATED_ZONE)
-        ):
-            new_zone = associated_zone
-        else:
-            new_zone = zone.ENTITY_ID_HOME
-
-        if new_zone == self._scanner_option_associated_zone:
-            return
-
-        # Tear down tracking for the previous zone.
-        if self._scanner_option_associated_zone_unsub is not None:
-            self._scanner_option_associated_zone_unsub()
-            self._scanner_option_associated_zone_unsub = None
-        self._async_clear_associated_zone_issue()
-
-        self._scanner_option_associated_zone = new_zone
-
-        # zone.home is always present so no tracking or issue handling needed.
-        if new_zone == zone.ENTITY_ID_HOME:
-            return
-
-        self._scanner_option_associated_zone_unsub = async_track_state_change_event(
-            self.hass, new_zone, self._async_associated_zone_state_changed
-        )
-        if self.hass.states.get(new_zone) is None:
-            self._async_create_associated_zone_issue()
-
-    @callback
-    def _async_associated_zone_state_changed(
-        self, event: Event[EventStateChangedData]
-    ) -> None:
-        """Open or clear the repair issue when the associated zone appears or disappears."""
-        if event.data["new_state"] is None:
-            self._async_create_associated_zone_issue()
-        else:
-            self._async_clear_associated_zone_issue()
-        self.async_write_ha_state()
-
-    @callback
-    def _async_create_associated_zone_issue(self) -> None:
-        """Create a repair issue prompting the user to reconfigure the scanner."""
-        ir.async_create_issue(
-            self.hass,
-            DOMAIN,
-            self._associated_zone_issue_id,
-            is_fixable=False,
-            severity=ir.IssueSeverity.WARNING,
-            translation_key="associated_zone_missing",
-            translation_placeholders={
-                "entity_id": self.entity_id,
-                "zone": self._scanner_option_associated_zone,
-            },
-        )
-
-    @callback
-    def _async_clear_associated_zone_issue(self) -> None:
-        """Clear the associated-zone-missing repair issue if it exists."""
-        ir.async_delete_issue(self.hass, DOMAIN, self._associated_zone_issue_id)
-
-    @property
-    def _associated_zone_issue_id(self) -> str:
-        """Return the issue id for the associated-zone-missing repair."""
-        if TYPE_CHECKING:
-            assert self.registry_entry
-        return f"associated_zone_missing_{self.registry_entry.id}"
-
    @property
    def state(self) -> str | None:
        """Return the state of the device."""
        if self.is_connected is None:
            return None
-        if not self.is_connected:
-            return STATE_NOT_HOME
-        associated_zone = self._scanner_option_associated_zone
-        if associated_zone == zone.ENTITY_ID_HOME:
+        if self.is_connected:
            return STATE_HOME
-        if zone_state := self.hass.states.get(associated_zone):
-            return zone_state.name
-        # Configured zone has been removed; state is unknown.
-        return None
+        return STATE_NOT_HOME

    @property
    def is_connected(self) -> bool | None:
@@ -462,18 +341,9 @@ class BaseScannerEntity(BaseTrackerEntity):
        if not self.is_connected:
            return attr

-        associated_zone = self._scanner_option_associated_zone
-        # If the configured zone has been removed, in_zones stays empty so the
-        # attribute does not claim membership in a zone that no longer exists.
-        if (
-            associated_zone != zone.ENTITY_ID_HOME
-            and self.hass.states.get(associated_zone) is None
-        ):
-            return attr
-
        attr[ATTR_IN_ZONES] = [
-            associated_zone,
-            *zone.async_get_enclosing_zones(self.hass, associated_zone),
+            zone.ENTITY_ID_HOME,
+            *zone.async_get_enclosing_zones(self.hass, zone.ENTITY_ID_HOME),
        ]

        return attr
@@ -38,9 +38,6 @@ from homeassistant.const import (
 from homeassistant.core import Event, HomeAssistant, ServiceCall, callback
 from homeassistant.exceptions import HomeAssistantError
 from homeassistant.helpers import config_validation as cv, entity_registry as er
-from homeassistant.helpers.entity_platform import (
-    async_create_platform_config_not_supported_issue,
-)
 from homeassistant.helpers.event import (
    async_track_time_interval,
    async_track_utc_time_change,
@@ -382,8 +379,8 @@ async def async_extract_config(
        if platform.type == PLATFORM_TYPE_LEGACY:
            legacy.append(platform)
        else:
-            async_create_platform_config_not_supported_issue(
-                hass, platform.name, DOMAIN
+            raise ValueError(
+                f"Unable to determine type for {platform.name}: {platform.type}"
            )

    return legacy
@@ -44,12 +44,6 @@
      }
    }
  },
-  "issues": {
-    "associated_zone_missing": {
-      "description": "The scanner entity `{entity_id}` is associated with the zone `{zone}`, but that zone has been removed.\n\nTo fix this, reconfigure the scanner to use a different zone or recreate the missing zone.",
-      "title": "Scanner is associated with a removed zone"
-    }
-  },
  "services": {
    "see": {
      "description": "Manually update the records of a seen legacy device tracker in the known_devices.yaml file.",
@@ -1,7 +1,7 @@
 .trigger_common_fields: &trigger_common_fields
  behavior:
    required: true
-    default: each
+    default: any
    selector:
      automation_behavior:
        mode: trigger
@@ -15,7 +15,6 @@ from homeassistant.helpers.service_info.dhcp import DhcpServiceInfo
 from homeassistant.helpers.service_info.zeroconf import ZeroconfServiceInfo

 from .const import DOMAIN
-from .validation import UnsupportedBoardError, async_get_supported_board_info

 _LOGGER = logging.getLogger(__name__)

@@ -44,11 +43,6 @@ class DucoConfigFlow(ConfigFlow, domain=DOMAIN):

        try:
            box_name, _ = await self._validate_input(discovery_info.ip)
-        except UnsupportedBoardError:
-            _LOGGER.debug(
-                "Unsupported Duco board discovered via DHCP at %s", discovery_info.ip
-            )
-            return self.async_abort(reason="unsupported_board")
        except DucoConnectionError:
            return self.async_abort(reason="cannot_connect")
        except DucoError:
@@ -67,12 +61,6 @@ class DucoConfigFlow(ConfigFlow, domain=DOMAIN):
        """Handle zeroconf discovery."""
        try:
            box_name, mac = await self._validate_input(discovery_info.host)
-        except UnsupportedBoardError:
-            _LOGGER.debug(
-                "Unsupported Duco board discovered via zeroconf at %s",
-                discovery_info.host,
-            )
-            return self.async_abort(reason="unsupported_board")
        except DucoConnectionError:
            return self.async_abort(reason="cannot_connect")
        except DucoError:
@@ -114,8 +102,6 @@ class DucoConfigFlow(ConfigFlow, domain=DOMAIN):
        if user_input is not None:
            try:
                box_name, mac = await self._validate_input(user_input[CONF_HOST])
-            except UnsupportedBoardError:
-                errors["base"] = "unsupported_board"
            except DucoConnectionError:
                errors["base"] = "cannot_connect"
            except DucoError:
@@ -147,8 +133,6 @@ class DucoConfigFlow(ConfigFlow, domain=DOMAIN):
        if user_input is not None:
            try:
                box_name, mac = await self._validate_input(user_input[CONF_HOST])
-            except UnsupportedBoardError:
-                errors["base"] = "unsupported_board"
            except DucoConnectionError:
                errors["base"] = "cannot_connect"
            except DucoError:
@@ -178,6 +162,6 @@ class DucoConfigFlow(ConfigFlow, domain=DOMAIN):
            session=async_get_clientsession(self.hass),
            host=host,
        )
-        board_info = await async_get_supported_board_info(client)
+        board_info = await client.async_get_board_info()
        lan_info = await client.async_get_lan_info()
        return board_info.box_name, lan_info.mac
@@ -4,11 +4,7 @@ from dataclasses import dataclass
 import logging

 from duco_connectivity import DucoClient
-from duco_connectivity.exceptions import (
-    DucoConnectionError,
-    DucoError,
-    DucoResponseError,
-)
+from duco_connectivity.exceptions import DucoConnectionError, DucoError
 from duco_connectivity.models import BoardInfo, Node

 from homeassistant.config_entries import ConfigEntry
@@ -17,7 +13,6 @@ from homeassistant.exceptions import ConfigEntryError
 from homeassistant.helpers.update_coordinator import DataUpdateCoordinator, UpdateFailed

 from .const import DOMAIN, SCAN_INTERVAL
-from .validation import UnsupportedBoardError, async_get_supported_board_info

 _LOGGER = logging.getLogger(__name__)

@@ -57,18 +52,7 @@ class DucoCoordinator(DataUpdateCoordinator[DucoData]):
    async def _async_setup(self) -> None:
        """Fetch board info once during initial setup."""
        try:
-            self.board_info = await async_get_supported_board_info(self.client)
-        except UnsupportedBoardError as err:
-            raise ConfigEntryError(
-                translation_domain=DOMAIN,
-                translation_key="unsupported_board",
-            ) from err
-        except DucoResponseError as err:
-            raise ConfigEntryError(
-                translation_domain=DOMAIN,
-                translation_key="api_error",
-                translation_placeholders={"error": repr(err)},
-            ) from err
+            self.board_info = await self.client.async_get_board_info()
        except DucoConnectionError as err:
            raise UpdateFailed(
                translation_domain=DOMAIN,
@@ -86,6 +70,20 @@ class DucoCoordinator(DataUpdateCoordinator[DucoData]):
        """Fetch node data from the Duco box."""
        try:
            nodes = await self.client.async_get_nodes()
+        except DucoConnectionError as err:
+            raise UpdateFailed(
+                translation_domain=DOMAIN,
+                translation_key="cannot_connect",
+                translation_placeholders={"error": repr(err)},
+            ) from err
+        except DucoError as err:
+            raise UpdateFailed(
+                translation_domain=DOMAIN,
+                translation_key="api_error",
+                translation_placeholders={"error": repr(err)},
+            ) from err
+
+        try:
            lan_info = await self.client.async_get_lan_info()
        except DucoConnectionError as err:
            raise UpdateFailed(
@@ -6,13 +6,11 @@
      "cannot_connect": "[%key:common::config_flow::error::cannot_connect%]",
      "reconfigure_successful": "[%key:common::config_flow::abort::reconfigure_successful%]",
      "unique_id_mismatch": "The device you entered belongs to a different Duco box.",
-      "unknown": "[%key:common::config_flow::error::unknown%]",
-      "unsupported_board": "This Duco system is not supported by this integration. The integration requires a Duco Connectivity Board running public API 2.1 or newer."
+      "unknown": "[%key:common::config_flow::error::unknown%]"
    },
    "error": {
      "cannot_connect": "[%key:common::config_flow::error::cannot_connect%]",
-      "unknown": "[%key:common::config_flow::error::unknown%]",
-      "unsupported_board": "[%key:component::duco::config::abort::unsupported_board%]"
+      "unknown": "[%key:common::config_flow::error::unknown%]"
    },
    "step": {
      "discovery_confirm": {
@@ -64,23 +62,23 @@
      "ventilation_state": {
        "name": "Ventilation state",
        "state": {
-          "aut1": "AUT1",
-          "aut2": "AUT2",
-          "aut3": "AUT3",
-          "auto": "AUTO",
-          "cnt1": "CNT1",
-          "cnt2": "CNT2",
-          "cnt3": "CNT3",
-          "empt": "EMPT",
-          "man1": "MAN1",
-          "man1x2": "MAN1x2",
-          "man1x3": "MAN1x3",
-          "man2": "MAN2",
-          "man2x2": "MAN2x2",
-          "man2x3": "MAN2x3",
-          "man3": "MAN3",
-          "man3x2": "MAN3x2",
-          "man3x3": "MAN3x3"
+          "aut1": "Automatic boost (15 min)",
+          "aut2": "Automatic boost (30 min)",
+          "aut3": "Automatic boost (45 min)",
+          "auto": "Automatic",
+          "cnt1": "Continuous low speed",
+          "cnt2": "Continuous medium speed",
+          "cnt3": "Continuous high speed",
+          "empt": "Empty house",
+          "man1": "Manual low speed (15 min)",
+          "man1x2": "Manual low speed (30 min)",
+          "man1x3": "Manual low speed (45 min)",
+          "man2": "Manual medium speed (15 min)",
+          "man2x2": "Manual medium speed (30 min)",
+          "man2x3": "Manual medium speed (45 min)",
+          "man3": "Manual high speed (15 min)",
+          "man3x2": "Manual high speed (30 min)",
+          "man3x3": "Manual high speed (45 min)"
        }
      }
    }
@@ -100,9 +98,6 @@
    },
    "rate_limit_exceeded": {
      "message": "The Duco device has reached its daily write limit. Try again tomorrow."
-    },
-    "unsupported_board": {
-      "message": "[%key:component::duco::config::abort::unsupported_board%]"
    }
  },
  "system_health": {
@@ -1,58 +0,0 @@
-"""Validation helpers for supported Duco systems."""
-
-from awesomeversion import (
-    AwesomeVersion,
-    AwesomeVersionStrategy,
-    AwesomeVersionStrategyException,
-)
-from duco_connectivity import DucoClient
-from duco_connectivity.exceptions import DucoResponseError
-from duco_connectivity.models import BoardInfo
-
-# Newer Connectivity boards expose /info with PublicApiVersion. We use that
-# endpoint to distinguish supported Connectivity hardware from older
-# Communication board V1 hardware.
-_MIN_PUBLIC_API_VERSION = AwesomeVersion(
-    "2.1", ensure_strategy=AwesomeVersionStrategy.SIMPLEVER
-)
-
-
-class UnsupportedBoardError(Exception):
-    """Raised when the Duco system is not supported by this integration."""
-
-
-def validate_board_support(board_info: BoardInfo) -> None:
-    """Raise UnsupportedBoardError if the board does not meet support requirements."""
-    version = board_info.public_api_version
-    if version is None:
-        raise UnsupportedBoardError("Board did not report a public API version")
-    try:
-        parsed_version = AwesomeVersion(
-            version, ensure_strategy=AwesomeVersionStrategy.SIMPLEVER
-        )
-    except AwesomeVersionStrategyException as err:
-        raise UnsupportedBoardError(
-            f"Board reported malformed public API version: {version}"
-        ) from err
-    if parsed_version < _MIN_PUBLIC_API_VERSION:
-        raise UnsupportedBoardError(
-            "Board public API version "
-            f"{version} is below the supported minimum {_MIN_PUBLIC_API_VERSION}"
-        )
-
-
-async def async_get_supported_board_info(client: DucoClient) -> BoardInfo:
-    """Fetch and validate board info for a supported Duco system."""
-    try:
-        board_info = await client.async_get_board_info()
-    except DucoResponseError as err:
-        if err.status == 404:
-            # Duco indicated that Communication board V1 does not implement
-            # /info, so a 404 is enough to treat the device as unsupported.
-            raise UnsupportedBoardError(
-                "Board does not expose the /info endpoint"
-            ) from err
-        raise
-
-    validate_board_support(board_info)
-    return board_info
@@ -41,7 +41,7 @@ class UKFloodsFlowHandler(ConfigFlow, domain=DOMAIN):
        self.stations = {}
        for station in stations:
            label = station["label"]
-            rlo_id = station["RLOIid"]
+            rloId = station["RLOIid"]

            # API annoyingly sometimes returns a list and some times returns a string
            # E.g. L3121 has a label of ['Scurf Dyke', 'Scurf Dyke Dyke Level']
@@ -50,11 +50,11 @@ class UKFloodsFlowHandler(ConfigFlow, domain=DOMAIN):

            # Similar for RLOIid
            # E.g. 0018 has an RLOIid of ['10427', '9154']
-            if isinstance(rlo_id, list):
-                rlo_id = rlo_id[-1]
+            if isinstance(rloId, list):
+                rloId = rloId[-1]

-            full_name = label + " - " + rlo_id
-            self.stations[full_name] = station["stationReference"]
+            fullName = label + " - " + rloId
+            self.stations[fullName] = station["stationReference"]

        if not self.stations:
            return self.async_abort(reason="no_stations")
@@ -40,7 +40,6 @@ ELK_ELEMENTS = {
 EVENT_ELKM1_KEYPAD_KEY_PRESSED = "elkm1.keypad_key_pressed"


-ATTR_DURATION = "duration"
 ATTR_KEYPAD_ID = "keypad_id"
 ATTR_KEY = "key"
 ATTR_KEY_NAME = "key_name"
@@ -48,9 +48,6 @@
    },
    "speak_word": {
      "service": "mdi:message-minus"
-    },
-    "switch_output_turn_on_for": {
-      "service": "mdi:timer"
    }
  }
 }
@@ -161,15 +161,3 @@ sensor_zone_trigger:
    entity:
      integration: elkm1
      domain: sensor
-
-switch_output_turn_on_for:
-  target:
-    entity:
-      integration: elkm1
-      domain: switch
-  fields:
-    duration:
-      example: 42
-      required: true
-      selector:
-        duration:
@@ -210,16 +210,6 @@
        }
      },
      "name": "Speak word"
-    },
-    "switch_output_turn_on_for": {
-      "description": "Turns on an output for a specified length of time.",
-      "fields": {
-        "duration": {
-          "description": "Length of time to turn the output on for.",
-          "name": "Duration"
-        }
-      },
-      "name": "Switch output turn on for"
    }
  }
 }
@@ -1,7 +1,5 @@
 """Support for control of ElkM1 outputs (relays)."""

-from datetime import timedelta
-from math import ceil
 from typing import Any

 from elkm1_lib.const import ThermostatMode, ThermostatSetting
@@ -9,29 +7,15 @@ from elkm1_lib.elements import Element
 from elkm1_lib.elk import Elk
 from elkm1_lib.outputs import Output
 from elkm1_lib.thermostats import Thermostat
-import voluptuous as vol

-from homeassistant.components.switch import DOMAIN as SWITCH_DOMAIN, SwitchEntity
+from homeassistant.components.switch import SwitchEntity
 from homeassistant.core import HomeAssistant
-from homeassistant.exceptions import HomeAssistantError
-from homeassistant.helpers import config_validation as cv, service
 from homeassistant.helpers.entity_platform import AddConfigEntryEntitiesCallback
-from homeassistant.helpers.typing import VolDictType

 from . import ElkM1ConfigEntry
-from .const import ATTR_DURATION, DOMAIN
 from .entity import ElkAttachedEntity, ElkEntity, create_elk_entities
 from .models import ELKM1Data

-SERVICE_SWITCH_OUTPUT_TURN_ON_FOR = "switch_output_turn_on_for"
-
-ELK_OUTPUT_TURN_ON_FOR_SERVICE_SCHEMA: VolDictType = {
-    vol.Required(ATTR_DURATION): vol.All(
-        cv.time_period,
-        vol.Range(min=timedelta(seconds=1), max=timedelta(seconds=65535)),
-    ),
-}
-

 async def async_setup_entry(
    hass: HomeAssistant,
@@ -48,15 +32,6 @@ async def async_setup_entry(
    )
    async_add_entities(entities)

-    service.async_register_platform_entity_service(
-        hass,
-        DOMAIN,
-        SERVICE_SWITCH_OUTPUT_TURN_ON_FOR,
-        entity_domain=SWITCH_DOMAIN,
-        schema=ELK_OUTPUT_TURN_ON_FOR_SERVICE_SCHEMA,
-        func="async_switch_output_turn_on_for",
-    )
-

 class ElkOutput(ElkAttachedEntity, SwitchEntity):
    """Elk output as switch."""
@@ -76,10 +51,6 @@ class ElkOutput(ElkAttachedEntity, SwitchEntity):
        """Turn off the output."""
        self._element.turn_off()

-    async def async_switch_output_turn_on_for(self, duration: timedelta) -> None:
-        """Turn on an output for specified length of time."""
-        self._element.turn_on(ceil(duration.total_seconds()))
-

 class ElkThermostatEMHeat(ElkEntity, SwitchEntity):
    """Elk Thermostat emergency heat as switch."""
@@ -108,7 +79,3 @@ class ElkThermostatEMHeat(ElkEntity, SwitchEntity):
    async def async_turn_off(self, **kwargs: Any) -> None:
        """Turn off the output."""
        self._elk_set(ThermostatMode.EMERGENCY_HEAT)
-
-    async def async_switch_output_turn_on_for(self, duration: timedelta) -> None:
-        """Turn on an output for specified length of time: not supported for thermostat."""
-        raise HomeAssistantError("supported only on ElkM1 output switch entities")
@@ -17,7 +17,7 @@
  "mqtt": ["esphome/discover/#"],
  "quality_scale": "platinum",
  "requirements": [
-    "aioesphomeapi==45.3.1",
+    "aioesphomeapi==45.2.2",
    "esphome-dashboard-api==1.3.0",
    "bleak-esphome==3.9.1"
  ],
@@ -124,11 +124,11 @@ async def async_setup_entry(

    for camera in coordinator.data:
        device_category = coordinator.data[camera].get("device_category")
-        support_ext = coordinator.data[camera].get("supportExt")
+        supportExt = coordinator.data[camera].get("supportExt")
        if (
            device_category == DeviceCatagories.BATTERY_CAMERA_DEVICE_CATEGORY.value
-            and support_ext
-            and str(SupportExt.SupportBatteryManage.value) in support_ext
+            and supportExt
+            and str(SupportExt.SupportBatteryManage.value) in supportExt
        ):
            entities.append(
                EzvizSelect(coordinator, camera, BATTERY_WORK_MODE_SELECT_TYPE)
@@ -5,7 +5,7 @@
  fields:
    behavior:
      required: true
-      default: each
+      default: any
      selector:
        automation_behavior:
          mode: trigger
@@ -21,5 +21,5 @@
  "integration_type": "system",
  "preview_features": { "winter_mode": {} },
  "quality_scale": "internal",
-  "requirements": ["home-assistant-frontend==20260527.0"]
+  "requirements": ["home-assistant-frontend==20260429.4"]
 }
@@ -1,7 +1,7 @@
 .trigger_common_fields: &trigger_common_fields
  behavior:
    required: true
-    default: each
+    default: any
    selector:
      automation_behavior:
        mode: trigger
@@ -1,7 +1,7 @@
 .trigger_common_fields: &trigger_common_fields
  behavior:
    required: true
-    default: each
+    default: any
    selector:
      automation_behavior:
        mode: trigger
@@ -7,30 +7,19 @@ from google_air_quality_api.auth import Auth

 from homeassistant.const import CONF_API_KEY, Platform
 from homeassistant.core import HomeAssistant
-from homeassistant.helpers import config_validation as cv
 from homeassistant.helpers.aiohttp_client import async_get_clientsession
-from homeassistant.helpers.typing import ConfigType

-from .const import CONF_REFERRER, DOMAIN
+from .const import CONF_REFERRER
 from .coordinator import (
    GoogleAirQualityConfigEntry,
    GoogleAirQualityRuntimeData,
    GoogleAirQualityUpdateCoordinator,
 )
-from .services import async_setup_services

 PLATFORMS: list[Platform] = [
    Platform.SENSOR,
 ]

-CONFIG_SCHEMA = cv.config_entry_only_config_schema(DOMAIN)
-
-
-async def async_setup(hass: HomeAssistant, config: ConfigType) -> bool:
-    """Set up the Google Air Quality integration."""
-    async_setup_services(hass)
-    return True
-

 async def async_setup_entry(
    hass: HomeAssistant, entry: GoogleAirQualityConfigEntry
@@ -11,10 +11,5 @@
        "default": "mdi:molecule"
      }
    }
-  },
-  "services": {
-    "get_forecast": {
-      "service": "mdi:clock-end"
-    }
  }
 }
@@ -1,107 +0,0 @@
-"""Services for the Google Air Quality integration."""
-
-from datetime import timedelta
-from typing import Final, cast
-
-from google_air_quality_api.exceptions import GoogleAirQualityApiError
-import voluptuous as vol
-
-from homeassistant.config_entries import ConfigEntry
-from homeassistant.const import ATTR_DEVICE_ID
-from homeassistant.core import (
-    HomeAssistant,
-    ServiceCall,
-    ServiceResponse,
-    SupportsResponse,
-    callback,
-)
-from homeassistant.exceptions import HomeAssistantError, ServiceValidationError
-from homeassistant.helpers import device_registry as dr, selector
-
-from .const import DOMAIN
-from .coordinator import GoogleAirQualityConfigEntry
-
-ATTR_HOURS: Final = "hours"
-
-FORECAST_HOURS_MAX: Final = 96
-
-SERVICE_GET_FORECAST: Final = "get_forecast"
-
-SERVICE_GET_FORECAST_SCHEMA: Final = vol.Schema(
-    {
-        vol.Required(ATTR_DEVICE_ID): selector.DeviceSelector({"integration": DOMAIN}),
-        vol.Required(ATTR_HOURS): vol.All(
-            vol.Coerce(int), vol.Range(min=1, max=FORECAST_HOURS_MAX)
-        ),
-    }
-)
-
-
-def _get_config_entry_and_subentry_id(
-    hass: HomeAssistant, device_id: str
-) -> tuple[GoogleAirQualityConfigEntry, str]:
-    """Get the config entry and subentry from a selected location device."""
-    device = dr.async_get(hass).async_get(device_id)
-    if device is not None:
-        for entry_id, subentry_ids in device.config_entries_subentries.items():
-            config_entry: ConfigEntry | None = hass.config_entries.async_get_entry(
-                entry_id
-            )
-            if config_entry is None or config_entry.domain != DOMAIN:
-                continue
-
-            gaq_config_entry = cast(GoogleAirQualityConfigEntry, config_entry)
-            for subentry_id in subentry_ids:
-                if (
-                    subentry_id is not None
-                    and subentry_id
-                    in gaq_config_entry.runtime_data.subentries_runtime_data
-                ):
-                    return gaq_config_entry, subentry_id
-
-    raise ServiceValidationError(
-        translation_domain=DOMAIN,
-        translation_key="device_not_found",
-    )
-
-
-async def _async_get_forecast(call: ServiceCall) -> ServiceResponse:
-    """Fetch the air quality forecast for a configured location."""
-    config_entry, subentry_id = _get_config_entry_and_subentry_id(
-        call.hass, call.data[ATTR_DEVICE_ID]
-    )
-
-    coordinator = config_entry.runtime_data.subentries_runtime_data[subentry_id]
-
-    try:
-        forecast = await config_entry.runtime_data.api.async_get_forecast(
-            coordinator.lat,
-            coordinator.long,
-            timedelta(hours=call.data[ATTR_HOURS]),
-        )
-    except GoogleAirQualityApiError as err:
-        raise HomeAssistantError(
-            translation_domain=DOMAIN,
-            translation_key="unable_to_fetch",
-        ) from err
-
-    return cast(
-        ServiceResponse,
-        {
-            "forecast_time": forecast.hourly_forecasts[0].date_time,
-            "indexes": forecast.hourly_forecasts[0].indexes,
-            "pollutants": forecast.hourly_forecasts[0].pollutants,
-        },
-    )
-
-
-@callback
-def async_setup_services(hass: HomeAssistant) -> None:
-    """Set up services."""
-    hass.services.async_register(
-        DOMAIN,
-        SERVICE_GET_FORECAST,
-        _async_get_forecast,
-        schema=SERVICE_GET_FORECAST_SCHEMA,
-        supports_response=SupportsResponse.ONLY,
-    )
@@ -1,15 +0,0 @@
-get_forecast:
-  fields:
-    device_id:
-      required: true
-      selector:
-        device:
-          integration: google_air_quality
-    hours:
-      required: true
-      selector:
-        number:
-          min: 1
-          max: 96
-          step: 1
-          mode: box
@@ -270,27 +270,8 @@
    }
  },
  "exceptions": {
-    "device_not_found": {
-      "message": "Location not found."
-    },
    "unable_to_fetch": {
      "message": "[%key:component::google_air_quality::common::unable_to_fetch%]"
    }
-  },
-  "services": {
-    "get_forecast": {
-      "description": "Get an air quality forecast for a configured location.",
-      "fields": {
-        "device_id": {
-          "description": "The location to fetch the forecast for.",
-          "name": "Location"
-        },
-        "hours": {
-          "description": "How many hours into the future to forecast.",
-          "name": "Hours"
-        }
-      },
-      "name": "Get forecast"
-    }
  }
 }
@@ -117,13 +117,13 @@ class DriveClient:
        """Get storage quota of the current user."""
        res = await self._api.get_user(params={"fields": "storageQuota"})

-        storage_quota = res["storageQuota"]
-        limit = storage_quota.get("limit")
+        storageQuota = res["storageQuota"]
+        limit = storageQuota.get("limit")
        return StorageQuotaData(
            limit=int(limit) if limit is not None else None,
-            usage=int(storage_quota.get("usage", 0)),
-            usage_in_drive=int(storage_quota.get("usageInDrive", 0)),
-            usage_in_trash=int(storage_quota.get("usageInTrash", 0)),
+            usage=int(storageQuota.get("usage", 0)),
+            usage_in_drive=int(storageQuota.get("usageInDrive", 0)),
+            usage_in_trash=int(storageQuota.get("usageInTrash", 0)),
        )

    async def async_create_ha_root_folder_if_not_exists(self) -> tuple[str, str]:
@@ -19,7 +19,7 @@ DEFAULT_STT_PROMPT = "Transcribe the attached audio"

 CONF_RECOMMENDED = "recommended"
 CONF_CHAT_MODEL = "chat_model"
-RECOMMENDED_CHAT_MODEL = "models/gemini-3.1-flash-lite"
+RECOMMENDED_CHAT_MODEL = "models/gemini-2.5-flash"
 RECOMMENDED_STT_MODEL = RECOMMENDED_CHAT_MODEL
 RECOMMENDED_TTS_MODEL = "models/gemini-2.5-flash-preview-tts"
 RECOMMENDED_IMAGE_MODEL = "models/gemini-2.5-flash-image"
@@ -580,17 +580,17 @@ class GoogleGenerativeAILLMBaseEntity(Entity):

        if tool_results:
            messages.append(_create_google_tool_response_content(tool_results))
-        generate_content_config = self.create_generate_content_config()
-        generate_content_config.tools = tools or None
-        generate_content_config.system_instruction = (
+        generateContentConfig = self.create_generate_content_config()
+        generateContentConfig.tools = tools or None
+        generateContentConfig.system_instruction = (
            prompt if supports_system_instruction else None
        )
-        generate_content_config.automatic_function_calling = (
+        generateContentConfig.automatic_function_calling = (
            AutomaticFunctionCallingConfig(disable=True, maximum_remote_calls=None)
        )
        if structure:
-            generate_content_config.response_mime_type = "application/json"
-            generate_content_config.response_schema = _format_schema(
+            generateContentConfig.response_mime_type = "application/json"
+            generateContentConfig.response_schema = _format_schema(
                convert(
                    structure,
                    custom_serializer=(
@@ -608,7 +608,7 @@ class GoogleGenerativeAILLMBaseEntity(Entity):
                *messages,
            ]
        chat = self._genai_client.aio.chats.create(
-            model=model_name, history=messages, config=generate_content_config
+            model=model_name, history=messages, config=generateContentConfig
        )
        user_message = chat_log.content[-1]
        assert isinstance(user_message, conversation.UserContent)
@@ -313,7 +313,7 @@ async def _manage_quests(call: ServiceCall) -> ServiceResponse:
    )
    coordinator = entry.runtime_data

-    func_map = {
+    FUNC_MAP = {
        SERVICE_ABORT_QUEST: coordinator.habitica.abort_quest,
        SERVICE_ACCEPT_QUEST: coordinator.habitica.accept_quest,
        SERVICE_CANCEL_QUEST: coordinator.habitica.cancel_quest,
@@ -322,7 +322,7 @@ async def _manage_quests(call: ServiceCall) -> ServiceResponse:
        SERVICE_START_QUEST: coordinator.habitica.start_quest,
    }

-    func = func_map[call.service]
+    func = FUNC_MAP[call.service]

    try:
        response = await func()
@@ -131,8 +131,12 @@ ATTR_AUTO_UPDATE = "auto_update"
 ATTR_VERSION = "version"
 ATTR_VERSION_LATEST = "version_latest"
 ATTR_CPU_PERCENT = "cpu_percent"
+# pylint: disable-next=home-assistant-duplicate-const
+ATTR_LOCATION = "location"
 ATTR_MEMORY_PERCENT = "memory_percent"
 ATTR_SLUG = "slug"
+# pylint: disable-next=home-assistant-duplicate-const
+ATTR_STATE = "state"
 ATTR_STARTED = "started"
 ATTR_URL = "url"
 ATTR_REPOSITORY = "repository"
@@ -173,6 +177,19 @@ CORE_CONTAINER = "homeassistant"
 SUPERVISOR_CONTAINER = "hassio_supervisor"

 CONTAINER_STATS = "stats"
+CONTAINER_INFO = "info"
+
+# This is a mapping of which endpoint the key in the addon data
+# is obtained from so we know which endpoint to update when the
+# coordinator polls for updates.
+KEY_TO_UPDATE_TYPES: dict[str, set[str]] = {
+    ATTR_VERSION_LATEST: {CONTAINER_INFO},
+    ATTR_MEMORY_PERCENT: {CONTAINER_STATS},
+    ATTR_CPU_PERCENT: {CONTAINER_STATS},
+    ATTR_VERSION: {CONTAINER_INFO},
+    ATTR_STATE: {CONTAINER_INFO},
+}
+
 REQUEST_REFRESH_DELAY = 10

 HELP_URLS = {
@@ -15,7 +15,7 @@ from aiohasupervisor.models import (
 )
 import voluptuous as vol

-from homeassistant.const import ATTR_DEVICE_ID, ATTR_LOCATION, ATTR_NAME
+from homeassistant.const import ATTR_DEVICE_ID, ATTR_NAME
 from homeassistant.core import (
    HomeAssistant,
    ServiceCall,
@@ -43,6 +43,7 @@ from .const import (
    ATTR_HOMEASSISTANT,
    ATTR_HOMEASSISTANT_EXCLUDE_DATABASE,
    ATTR_INPUT,
+    ATTR_LOCATION,
    ATTR_PASSWORD,
    ATTR_SLUG,
    DOMAIN,
@@ -3,7 +3,7 @@
  "name": "Home Assistant Hardware",
  "after_dependencies": ["hassio"],
  "codeowners": ["@home-assistant/core"],
-  "dependencies": ["repairs", "usb"],
+  "dependencies": ["usb"],
  "documentation": "https://www.home-assistant.io/integrations/homeassistant_hardware",
  "integration_type": "system",
  "requirements": [
@@ -1,72 +0,0 @@
-"""Repairs for the Home Assistant Hardware integration."""
-
-from homeassistant.components.repairs import RepairsFlow, RepairsFlowResult
-from homeassistant.config_entries import ConfigEntry
-from homeassistant.core import HomeAssistant, callback
-from homeassistant.helpers import issue_registry as ir
-
-ISSUE_MULTI_PAN_MIGRATION = "multi_pan_migration"
-
-
-@callback
-def _multi_pan_issue_id(config_entry: ConfigEntry) -> str:
-    """Return the issue id for the multi-PAN migration issue of an entry."""
-    return f"{ISSUE_MULTI_PAN_MIGRATION}_{config_entry.entry_id}"
-
-
-@callback
-def async_create_multi_pan_migration_issue(
-    hass: HomeAssistant,
-    domain: str,
-    config_entry: ConfigEntry,
-) -> None:
-    """Create a repair issue to guide migration away from Multi-PAN."""
-    ir.async_create_issue(
-        hass,
-        domain=domain,
-        issue_id=_multi_pan_issue_id(config_entry),
-        is_fixable=True,
-        is_persistent=False,
-        severity=ir.IssueSeverity.WARNING,
-        translation_key=ISSUE_MULTI_PAN_MIGRATION,
-        translation_placeholders={"hardware_name": config_entry.title},
-        data={"entry_id": config_entry.entry_id},
-    )
-
-
-@callback
-def async_delete_multi_pan_migration_issue(
-    hass: HomeAssistant,
-    domain: str,
-    config_entry: ConfigEntry,
-) -> None:
-    """Delete the multi-PAN migration repair issue for this entry."""
-    ir.async_delete_issue(hass, domain, _multi_pan_issue_id(config_entry))
-
-
-class MultiPanMigrationRepairFlow(RepairsFlow):
-    """Reuse the multi-PAN options flow uninstall steps as a repair flow.
-
-    Subclass this together with the hardware-specific
-    ``MultiPanOptionsFlowHandler`` in each hardware integration's repairs
-    module.
-
-    The repair flow runs in the repairs flow manager where ``self.handler``
-    is the integration domain rather than the hardware config entry id, so
-    the ``config_entry`` accessor of ``OptionsFlow`` must be overridden.
-    """
-
-    _repair_config_entry: ConfigEntry
-
-    @property
-    def config_entry(self) -> ConfigEntry:
-        """Return the hardware config entry to migrate."""
-        return self._repair_config_entry
-
-    async def _async_step_start_migration(self) -> RepairsFlowResult:
-        """Jump straight into the uninstall step of the migration flow.
-
-        The repair flow's init data is the issue context, not user form input,
-        so pass None to render the uninstall confirmation form.
-        """
-        return await self.async_step_uninstall_addon()  # type: ignore[attr-defined, no-any-return]
@@ -6,8 +6,6 @@ import dataclasses
 import logging
 from typing import Any, Protocol

-from aiohttp import ClientError
-from ha_silabs_firmware_client import FirmwareUpdateClient, ManifestMissing
 import voluptuous as vol
 import yarl

@@ -27,7 +25,6 @@ from homeassistant.config_entries import (
 from homeassistant.core import HomeAssistant, callback
 from homeassistant.data_entry_flow import AbortFlow
 from homeassistant.exceptions import HomeAssistantError
-from homeassistant.helpers.aiohttp_client import async_get_clientsession
 from homeassistant.helpers.hassio import is_hassio
 from homeassistant.helpers.integration_platform import (
    async_process_integration_platforms,
@@ -40,18 +37,15 @@ from homeassistant.helpers.selector import (
 from homeassistant.helpers.singleton import singleton
 from homeassistant.helpers.storage import Store

-from .const import DOMAIN, LOGGER, SILABS_MULTIPROTOCOL_ADDON_SLUG
-from .util import (
-    ApplicationType,
-    WaitingAddonManager,
-    async_firmware_flashing_context,
-    async_flash_silabs_firmware,
-)
+from .const import LOGGER, SILABS_FLASHER_ADDON_SLUG, SILABS_MULTIPROTOCOL_ADDON_SLUG

 _LOGGER = logging.getLogger(__name__)

 DATA_MULTIPROTOCOL_ADDON_MANAGER = "silabs_multiprotocol_addon_manager"
+DATA_FLASHER_ADDON_MANAGER = "silabs_flasher"

+ADDON_STATE_POLL_INTERVAL = 3
+ADDON_INFO_POLL_TIMEOUT = 15 * 60

 CONF_ADDON_AUTOFLASH_FW = "autoflash_firmware"
 CONF_ADDON_DEVICE = "device"
@@ -77,6 +71,53 @@ async def get_multiprotocol_addon_manager(
    return manager


+class WaitingAddonManager(AddonManager):
+    """Addon manager which supports waiting operations for managing an addon."""
+
+    async def async_wait_until_addon_state(self, *states: AddonState) -> None:
+        """Poll an addon's info until it is in a specific state."""
+        async with asyncio.timeout(ADDON_INFO_POLL_TIMEOUT):
+            while True:
+                try:
+                    info = await self.async_get_addon_info()
+                except AddonError:
+                    info = None
+
+                _LOGGER.debug("Waiting for addon to be in state %s: %s", states, info)
+
+                if info is not None and info.state in states:
+                    break
+
+                await asyncio.sleep(ADDON_STATE_POLL_INTERVAL)
+
+    async def async_start_addon_waiting(self) -> None:
+        """Start an add-on."""
+        await self.async_schedule_start_addon()
+        await self.async_wait_until_addon_state(AddonState.RUNNING)
+
+    async def async_install_addon_waiting(self) -> None:
+        """Install an add-on."""
+        await self.async_schedule_install_addon()
+        await self.async_wait_until_addon_state(
+            AddonState.RUNNING,
+            AddonState.NOT_RUNNING,
+        )
+
+    async def async_uninstall_addon_waiting(self) -> None:
+        """Uninstall an add-on."""
+        try:
+            info = await self.async_get_addon_info()
+        except AddonError:
+            info = None
+
+        # Do not try to uninstall an addon if it is already uninstalled
+        if info is not None and info.state is AddonState.NOT_INSTALLED:
+            return
+
+        await self.async_uninstall_addon()
+        await self.async_wait_until_addon_state(AddonState.NOT_INSTALLED)
+
+
 class MultiprotocolAddonManager(WaitingAddonManager):
    """Silicon Labs Multiprotocol add-on manager."""

@@ -224,6 +265,18 @@ class MultipanProtocol(Protocol):
        """


+@singleton(DATA_FLASHER_ADDON_MANAGER)
+@callback
+def get_flasher_addon_manager(hass: HomeAssistant) -> WaitingAddonManager:
+    """Get the flasher add-on manager."""
+    return WaitingAddonManager(
+        hass,
+        LOGGER,
+        "Silicon Labs Flasher",
+        SILABS_FLASHER_ADDON_SLUG,
+    )
+
+
@dataclasses.dataclass
 class SerialPortSettings:
    """Serial port settings."""
@@ -286,19 +339,6 @@ class OptionsFlowHandler(OptionsFlow, ABC):
    def _zha_name(self) -> str:
        """Return the ZHA name."""

-    @abstractmethod
-    def _firmware_update_url(self) -> str:
-        """Return the firmware update manifest URL."""
-
-    @abstractmethod
-    def _zigbee_firmware_type(self) -> str:
-        """Return the zigbee firmware type identifier (e.g. 'yellow_zigbee_ncp')."""
-
-    @property
-    @abstractmethod
-    def _flasher_cls(self) -> type:
-        """Return the hardware-specific flasher class."""
-
    @property
    def flow_manager(self) -> OptionsFlowManager:
        """Return the correct flow manager."""
@@ -646,7 +686,61 @@ class OptionsFlowHandler(OptionsFlow, ABC):
    async def async_step_firmware_revert(
        self, user_input: dict[str, Any] | None = None
    ) -> ConfigFlowResult:
-        """Initiate ZHA backup and start multiprotocol addon uninstall."""
+        """Install the flasher addon, if necessary."""
+
+        flasher_manager = get_flasher_addon_manager(self.hass)
+        addon_info = await self._async_get_addon_info(flasher_manager)
+
+        if addon_info.state is AddonState.NOT_INSTALLED:
+            return await self.async_step_install_flasher_addon()
+
+        if addon_info.state is AddonState.NOT_RUNNING:
+            return await self.async_step_configure_flasher_addon()
+
+        # If the addon is already installed and running, fail
+        return self.async_abort(
+            reason="addon_already_running",
+            description_placeholders={"addon_name": flasher_manager.addon_name},
+        )
+
+    async def async_step_install_flasher_addon(
+        self, user_input: dict[str, Any] | None = None
+    ) -> ConfigFlowResult:
+        """Show progress dialog for installing flasher addon."""
+        flasher_manager = get_flasher_addon_manager(self.hass)
+        addon_info = await self._async_get_addon_info(flasher_manager)
+
+        _LOGGER.debug("Flasher addon state: %s", addon_info)
+
+        if not self.install_task:
+            self.install_task = self.hass.async_create_task(
+                flasher_manager.async_install_addon_waiting(),
+                "SiLabs Flasher addon install",
+                eager_start=False,
+            )
+
+        if not self.install_task.done():
+            return self.async_show_progress(
+                step_id="install_flasher_addon",
+                progress_action="install_addon",
+                description_placeholders={"addon_name": flasher_manager.addon_name},
+                progress_task=self.install_task,
+            )
+
+        try:
+            await self.install_task
+        except AddonError as err:
+            _LOGGER.error(err)
+            return self.async_show_progress_done(next_step_id="install_failed")
+        finally:
+            self.install_task = None
+
+        return self.async_show_progress_done(next_step_id="configure_flasher_addon")
+
+    async def async_step_configure_flasher_addon(
+        self, user_input: dict[str, Any] | None = None
+    ) -> ConfigFlowResult:
+        """Perform initial backup and reconfigure ZHA."""
        # pylint: disable=home-assistant-component-root-import
        from homeassistant.components.zha import DOMAIN as ZHA_DOMAIN  # noqa: PLC0415
        from homeassistant.components.zha.radio_manager import (  # noqa: PLC0415
@@ -688,6 +782,17 @@ class OptionsFlowHandler(OptionsFlow, ABC):
                _LOGGER.exception("Unexpected exception during ZHA migration")
                raise AbortFlow("zha_migration_failed") from err

+        flasher_manager = get_flasher_addon_manager(self.hass)
+        addon_info = await self._async_get_addon_info(flasher_manager)
+        new_addon_config = {
+            **addon_info.options,
+            "device": new_settings.device,
+            "flow_control": new_settings.flow_control,
+        }
+
+        _LOGGER.debug("Reconfiguring flasher addon with %s", new_addon_config)
+        await self._async_set_addon_config(new_addon_config, flasher_manager)
+
        return await self.async_step_uninstall_multiprotocol_addon()

    async def async_step_uninstall_multiprotocol_addon(
@@ -716,93 +821,62 @@ class OptionsFlowHandler(OptionsFlow, ABC):
        finally:
            self.stop_task = None

-        return self.async_show_progress_done(next_step_id="install_zigbee_firmware")
+        return self.async_show_progress_done(next_step_id="start_flasher_addon")

-    async def async_step_install_zigbee_firmware(
+    async def async_step_start_flasher_addon(
        self, user_input: dict[str, Any] | None = None
    ) -> ConfigFlowResult:
-        """Flash Zigbee firmware directly onto the radio."""
-        if not self.install_task:
+        """Start Silicon Labs Flasher add-on."""
+        flasher_manager = get_flasher_addon_manager(self.hass)

-            async def _flash_firmware() -> None:
-                serial_port_settings = await self._async_serial_port_settings()
-                device = serial_port_settings.device
+        if not self.start_task:

-                # For the duration of firmware flashing, hint to other integrations
-                # (i.e. ZHA) that the hardware is in use and should not be accessed.
-                async with async_firmware_flashing_context(self.hass, device, DOMAIN):
-                    session = async_get_clientsession(self.hass)
-                    client = FirmwareUpdateClient(self._firmware_update_url(), session)
+            async def start_and_wait_until_done() -> None:
+                await flasher_manager.async_start_addon_waiting()
+                # Now that the addon is running, wait for it to finish
+                await flasher_manager.async_wait_until_addon_state(
+                    AddonState.NOT_RUNNING
+                )

-                    try:
-                        manifest = await client.async_update_data()
-                        fw_manifest = next(
-                            fw
-                            for fw in manifest.firmwares
-                            if fw.filename.startswith(self._zigbee_firmware_type())
-                        )
-                        fw_data = await client.async_fetch_firmware(fw_manifest)
-                    except (
-                        StopIteration,
-                        TimeoutError,
-                        ClientError,
-                        ManifestMissing,
-                        ValueError,
-                    ) as err:
-                        raise HomeAssistantError(
-                            "Failed to fetch Zigbee firmware"
-                        ) from err
-
-                    await async_flash_silabs_firmware(
-                        hass=self.hass,
-                        device=device,
-                        fw_data=fw_data,
-                        flasher_cls=self._flasher_cls,
-                        expected_installed_firmware_type=ApplicationType.EZSP,
-                        progress_callback=lambda offset, total: (
-                            self.async_update_progress(offset / total)
-                        ),
-                    )
-
-            self.install_task = self.hass.async_create_task(
-                _flash_firmware(),
-                "Flash Zigbee firmware",
-                eager_start=False,
+            self.start_task = self.hass.async_create_task(
+                start_and_wait_until_done(), eager_start=False
            )

-        if not self.install_task.done():
+        if not self.start_task.done():
            return self.async_show_progress(
-                step_id="install_zigbee_firmware",
-                progress_action="install_zigbee_firmware",
-                description_placeholders={
-                    "hardware_name": self._hardware_name(),
-                },
-                progress_task=self.install_task,
+                step_id="start_flasher_addon",
+                progress_action="start_flasher_addon",
+                description_placeholders={"addon_name": flasher_manager.addon_name},
+                progress_task=self.start_task,
            )

        try:
-            await self.install_task
-        except HomeAssistantError as err:
-            _LOGGER.error("Failed to flash Zigbee firmware: %s", err)
-            return self.async_show_progress_done(next_step_id="firmware_flash_failed")
+            await self.start_task
+        except (AddonError, AbortFlow) as err:
+            _LOGGER.error(err)
+            return self.async_show_progress_done(next_step_id="flasher_failed")
        finally:
-            self.install_task = None
+            self.start_task = None

        return self.async_show_progress_done(next_step_id="flashing_complete")

-    async def async_step_firmware_flash_failed(
+    async def async_step_flasher_failed(
        self, user_input: dict[str, Any] | None = None
    ) -> ConfigFlowResult:
-        """Firmware flashing failed."""
+        """Flasher add-on start failed."""
+        flasher_manager = get_flasher_addon_manager(self.hass)
        return self.async_abort(
-            reason="fw_install_failed",
-            description_placeholders={"firmware_name": "Zigbee"},
+            reason="addon_start_failed",
+            description_placeholders={"addon_name": flasher_manager.addon_name},
        )

    async def async_step_flashing_complete(
        self, user_input: dict[str, Any] | None = None
    ) -> ConfigFlowResult:
        """Finish flashing and update the config entry."""
+        flasher_manager = get_flasher_addon_manager(self.hass)
+        await flasher_manager.async_uninstall_addon_waiting()
+
        # Finish ZHA migration if needed
        if self._zha_migration_mgr:
            try:
@@ -102,9 +102,7 @@
      },
      "progress": {
        "install_addon": "Please wait while the {addon_name} app installation finishes. This can take several minutes.",
-        "install_zigbee_firmware": "Please wait while Zigbee-only firmware is installed on your {hardware_name}. This can take several minutes.",
-        "start_addon": "Please wait while the {addon_name} app start completes. This may take some seconds.",
-        "uninstall_multiprotocol_addon": "Please wait while the {addon_name} app is uninstalled."
+        "start_addon": "Please wait while the {addon_name} app start completes. This may take some seconds."
      },
      "step": {
        "addon_installed_other_device": {
@@ -37,59 +37,13 @@ from .const import (
    ZIGBEE_FLASHER_ADDON_SLUG,
 )
 from .helpers import async_firmware_update_context
+from .silabs_multiprotocol_addon import (
+    WaitingAddonManager,
+    get_multiprotocol_addon_manager,
+)

 _LOGGER = logging.getLogger(__name__)

-ADDON_STATE_POLL_INTERVAL = 3
-ADDON_INFO_POLL_TIMEOUT = 15 * 60
-
-
-class WaitingAddonManager(AddonManager):
-    """Addon manager which supports waiting operations for managing an addon."""
-
-    async def async_wait_until_addon_state(self, *states: AddonState) -> None:
-        """Poll an addon's info until it is in a specific state."""
-        async with asyncio.timeout(ADDON_INFO_POLL_TIMEOUT):
-            while True:
-                try:
-                    info = await self.async_get_addon_info()
-                except AddonError:
-                    info = None
-
-                _LOGGER.debug("Waiting for addon to be in state %s: %s", states, info)
-
-                if info is not None and info.state in states:
-                    break
-
-                await asyncio.sleep(ADDON_STATE_POLL_INTERVAL)
-
-    async def async_start_addon_waiting(self) -> None:
-        """Start an add-on."""
-        await self.async_schedule_start_addon()
-        await self.async_wait_until_addon_state(AddonState.RUNNING)
-
-    async def async_install_addon_waiting(self) -> None:
-        """Install an add-on."""
-        await self.async_schedule_install_addon()
-        await self.async_wait_until_addon_state(
-            AddonState.RUNNING,
-            AddonState.NOT_RUNNING,
-        )
-
-    async def async_uninstall_addon_waiting(self) -> None:
-        """Uninstall an add-on."""
-        try:
-            info = await self.async_get_addon_info()
-        except AddonError:
-            info = None
-
-        # Do not try to uninstall an addon if it is already uninstalled
-        if info is not None and info.state == AddonState.NOT_INSTALLED:
-            return
-
-        await self.async_uninstall_addon()
-        await self.async_wait_until_addon_state(AddonState.NOT_INSTALLED)
-

 class ApplicationType(StrEnum):
    """Application type running on a device."""
@@ -325,11 +279,6 @@ async def guess_hardware_owners(
        assert otbr_addon_fw_info is not None
        device_guesses[otbr_path].append(otbr_addon_fw_info)

-    # Lazy import to avoid circular dependency
-    from .silabs_multiprotocol_addon import (  # noqa: PLC0415
-        get_multiprotocol_addon_manager,
-    )
-
    multipan_addon_manager = await get_multiprotocol_addon_manager(hass)

    try:
@@ -7,13 +7,6 @@ import os.path
 from homeassistant.components.homeassistant_hardware.coordinator import (
    FirmwareUpdateCoordinator,
 )
-from homeassistant.components.homeassistant_hardware.repair_helpers import (
-    async_create_multi_pan_migration_issue,
-    async_delete_multi_pan_migration_issue,
-)
-from homeassistant.components.homeassistant_hardware.silabs_multiprotocol_addon import (
-    multi_pan_addon_using_device,
-)
 from homeassistant.components.homeassistant_hardware.util import guess_firmware_info
 from homeassistant.components.usb import (
    USBDevice,
@@ -99,16 +92,6 @@ async def async_setup_entry(
            translation_key="device_disconnected",
        )

-    try:
-        uses_multi_pan = await multi_pan_addon_using_device(hass, device_path)
-    except HomeAssistantError as err:
-        raise ConfigEntryNotReady from err
-
-    if uses_multi_pan:
-        async_create_multi_pan_migration_issue(hass, DOMAIN, entry)
-    else:
-        async_delete_multi_pan_migration_issue(hass, DOMAIN, entry)
-
    # Create and store the firmware update coordinator in runtime_data
    session = async_get_clientsession(hass)
    coordinator = FirmwareUpdateCoordinator(
@@ -248,19 +248,6 @@ class HomeAssistantSkyConnectMultiPanOptionsFlowHandler(
        """Return the name of the hardware."""
        return self._hw_variant.full_name

-    def _firmware_update_url(self) -> str:
-        """Return the firmware update manifest URL."""
-        return NABU_CASA_FIRMWARE_RELEASES_URL
-
-    def _zigbee_firmware_type(self) -> str:
-        """Return the zigbee firmware type identifier."""
-        return "skyconnect_zigbee_ncp"
-
-    @property
-    def _flasher_cls(self) -> type:
-        """Return the hardware-specific flasher class."""
-        return Zbt1Flasher  # type: ignore[no-any-return]
-
    async def async_step_flashing_complete(
        self, user_input: dict[str, Any] | None = None
    ) -> ConfigFlowResult:
@@ -1,48 +0,0 @@
-"""Repairs for the Home Assistant SkyConnect integration."""
-
-from typing import Any, cast
-
-from homeassistant.components.homeassistant_hardware.repair_helpers import (
-    ISSUE_MULTI_PAN_MIGRATION,
-    MultiPanMigrationRepairFlow,
-)
-from homeassistant.components.repairs import (
-    ConfirmRepairFlow,
-    RepairsFlow,
-    RepairsFlowResult,
-)
-from homeassistant.config_entries import ConfigEntry
-from homeassistant.core import HomeAssistant
-
-from .config_flow import HomeAssistantSkyConnectMultiPanOptionsFlowHandler
-
-
-class SkyConnectMultiPanMigrationRepairFlow(
-    MultiPanMigrationRepairFlow, HomeAssistantSkyConnectMultiPanOptionsFlowHandler
-):
-    """Multi-PAN migration repair flow for Home Assistant SkyConnect."""
-
-    def __init__(self, config_entry: ConfigEntry) -> None:
-        """Initialize the repair flow."""
-        HomeAssistantSkyConnectMultiPanOptionsFlowHandler.__init__(self, config_entry)
-        self._repair_config_entry = config_entry
-
-    async def async_step_init(  # type: ignore[override]
-        self, user_input: dict[str, Any] | None = None
-    ) -> RepairsFlowResult:
-        """Jump straight into the uninstall step."""
-        return await self._async_step_start_migration()
-
-
-async def async_create_fix_flow(
-    hass: HomeAssistant,
-    issue_id: str,
-    data: dict[str, str | int | float | None] | None,
-) -> RepairsFlow:
-    """Create a fix flow for a SkyConnect repair issue."""
-    if issue_id.startswith(ISSUE_MULTI_PAN_MIGRATION) and data is not None:
-        entry_id = cast(str, data["entry_id"])
-        if (entry := hass.config_entries.async_get_entry(entry_id)) is not None:
-            return SkyConnectMultiPanMigrationRepairFlow(entry)
-
-    return ConfirmRepairFlow()
@@ -106,37 +106,6 @@
      "message": "The device is not plugged in"
    }
  },
-  "issues": {
-    "multi_pan_migration": {
-      "fix_flow": {
-        "abort": {
-          "addon_already_running": "[%key:component::homeassistant_hardware::silabs_multiprotocol_hardware::options::abort::addon_already_running%]",
-          "addon_info_failed": "[%key:component::homeassistant_hardware::silabs_multiprotocol_hardware::options::abort::addon_info_failed%]",
-          "addon_install_failed": "[%key:component::homeassistant_hardware::silabs_multiprotocol_hardware::options::abort::addon_install_failed%]",
-          "addon_set_config_failed": "[%key:component::homeassistant_hardware::silabs_multiprotocol_hardware::options::abort::addon_set_config_failed%]",
-          "addon_start_failed": "[%key:component::homeassistant_hardware::silabs_multiprotocol_hardware::options::abort::addon_start_failed%]",
-          "fw_install_failed": "[%key:component::homeassistant_hardware::firmware_picker::options::abort::fw_install_failed%]",
-          "not_hassio": "[%key:component::homeassistant_hardware::silabs_multiprotocol_hardware::options::abort::not_hassio%]",
-          "zha_migration_failed": "[%key:component::homeassistant_hardware::silabs_multiprotocol_hardware::options::abort::zha_migration_failed%]"
-        },
-        "progress": {
-          "install_addon": "[%key:component::homeassistant_hardware::silabs_multiprotocol_hardware::options::progress::install_addon%]",
-          "install_zigbee_firmware": "[%key:component::homeassistant_hardware::silabs_multiprotocol_hardware::options::progress::install_zigbee_firmware%]",
-          "uninstall_multiprotocol_addon": "[%key:component::homeassistant_hardware::silabs_multiprotocol_hardware::options::progress::uninstall_multiprotocol_addon%]"
-        },
-        "step": {
-          "uninstall_addon": {
-            "data": {
-              "disable_multi_pan": "[%key:component::homeassistant_hardware::silabs_multiprotocol_hardware::options::step::uninstall_addon::data::disable_multi_pan%]"
-            },
-            "description": "Multiprotocol support for the IEEE 802.15.4 radio in your {hardware_name} has been deprecated. Migrate the radio back to Zigbee-only firmware to keep it working in the future.\n\nDisabling multiprotocol support will disable Thread support provided by the {hardware_name}. Your Thread devices will continue working only if you have another Thread border router nearby.\n\nIt will take a few minutes to install the Zigbee firmware and restore a backup.",
-            "title": "[%key:component::homeassistant_hardware::silabs_multiprotocol_hardware::options::step::uninstall_addon::title%]"
-          }
-        }
-      },
-      "title": "Multiprotocol support is deprecated"
-    }
-  },
  "options": {
    "abort": {
      "addon_already_running": "[%key:component::homeassistant_hardware::silabs_multiprotocol_hardware::options::abort::addon_already_running%]",
@@ -161,10 +130,8 @@
      "install_addon": "[%key:component::homeassistant_hardware::silabs_multiprotocol_hardware::options::progress::install_addon%]",
      "install_firmware": "[%key:component::homeassistant_hardware::firmware_picker::options::progress::install_firmware%]",
      "install_otbr_addon": "[%key:component::homeassistant_hardware::firmware_picker::options::progress::install_otbr_addon%]",
-      "install_zigbee_firmware": "[%key:component::homeassistant_hardware::silabs_multiprotocol_hardware::options::progress::install_zigbee_firmware%]",
      "start_addon": "[%key:component::homeassistant_hardware::silabs_multiprotocol_hardware::options::progress::start_addon%]",
-      "start_otbr_addon": "[%key:component::homeassistant_hardware::firmware_picker::options::progress::start_otbr_addon%]",
-      "uninstall_multiprotocol_addon": "[%key:component::homeassistant_hardware::silabs_multiprotocol_hardware::options::progress::uninstall_multiprotocol_addon%]"
+      "start_otbr_addon": "[%key:component::homeassistant_hardware::firmware_picker::options::progress::start_otbr_addon%]"
    },
    "step": {
      "addon_installed_other_device": {
@@ -7,13 +7,8 @@ from homeassistant.components.hassio import HassioNotReadyError, get_os_info
 from homeassistant.components.homeassistant_hardware.coordinator import (
    FirmwareUpdateCoordinator,
 )
-from homeassistant.components.homeassistant_hardware.repair_helpers import (
-    async_create_multi_pan_migration_issue,
-    async_delete_multi_pan_migration_issue,
-)
 from homeassistant.components.homeassistant_hardware.silabs_multiprotocol_addon import (
    check_multi_pan_addon,
-    multi_pan_addon_using_device,
 )
 from homeassistant.components.homeassistant_hardware.util import (
    ApplicationType,
@@ -32,7 +27,6 @@ from homeassistant.helpers.aiohttp_client import async_get_clientsession
 from homeassistant.helpers.hassio import is_hassio

 from .const import (
-    DOMAIN,
    FIRMWARE,
    FIRMWARE_VERSION,
    MANUFACTURER,
@@ -83,16 +77,6 @@ async def async_setup_entry(
        except HomeAssistantError as err:
            raise ConfigEntryNotReady from err

-    try:
-        multipan_using_device = await multi_pan_addon_using_device(hass, RADIO_DEVICE)
-    except HomeAssistantError as err:
-        raise ConfigEntryNotReady from err
-
-    if multipan_using_device:
-        async_create_multi_pan_migration_issue(hass, DOMAIN, entry)
-    else:
-        async_delete_multi_pan_migration_issue(hass, DOMAIN, entry)
-
    if firmware is ApplicationType.EZSP:
        discovery_flow.async_create_flow(
            hass,
@@ -319,19 +319,6 @@ class HomeAssistantYellowMultiPanOptionsFlowHandler(
        """Return the name of the hardware."""
        return BOARD_NAME

-    def _firmware_update_url(self) -> str:
-        """Return the firmware update manifest URL."""
-        return NABU_CASA_FIRMWARE_RELEASES_URL
-
-    def _zigbee_firmware_type(self) -> str:
-        """Return the zigbee firmware type identifier."""
-        return "yellow_zigbee_ncp"
-
-    @property
-    def _flasher_cls(self) -> type:
-        """Return the hardware-specific flasher class."""
-        return YellowFlasher  # type: ignore[no-any-return]
-
    async def async_step_flashing_complete(
        self, user_input: dict[str, Any] | None = None
    ) -> ConfigFlowResult:
@@ -1,48 +0,0 @@
-"""Repairs for the Home Assistant Yellow integration."""
-
-from typing import cast
-
-from homeassistant.components.homeassistant_hardware.repair_helpers import (
-    ISSUE_MULTI_PAN_MIGRATION,
-    MultiPanMigrationRepairFlow,
-)
-from homeassistant.components.repairs import (
-    ConfirmRepairFlow,
-    RepairsFlow,
-    RepairsFlowResult,
-)
-from homeassistant.config_entries import ConfigEntry
-from homeassistant.core import HomeAssistant
-
-from .config_flow import HomeAssistantYellowMultiPanOptionsFlowHandler
-
-
-class YellowMultiPanMigrationRepairFlow(
-    MultiPanMigrationRepairFlow, HomeAssistantYellowMultiPanOptionsFlowHandler
-):
-    """Multi-PAN migration repair flow for Home Assistant Yellow."""
-
-    def __init__(self, hass: HomeAssistant, config_entry: ConfigEntry) -> None:
-        """Initialize the repair flow."""
-        HomeAssistantYellowMultiPanOptionsFlowHandler.__init__(self, hass, config_entry)
-        self._repair_config_entry = config_entry
-
-    async def async_step_main_menu(  # type: ignore[override]
-        self, _: None = None
-    ) -> RepairsFlowResult:
-        """Jump straight into the uninstall step."""
-        return await self._async_step_start_migration()
-
-
-async def async_create_fix_flow(
-    hass: HomeAssistant,
-    issue_id: str,
-    data: dict[str, str | int | float | None] | None,
-) -> RepairsFlow:
-    """Create a fix flow for a Yellow repair issue."""
-    if issue_id.startswith(ISSUE_MULTI_PAN_MIGRATION) and data is not None:
-        entry_id = cast(str, data["entry_id"])
-        if (entry := hass.config_entries.async_get_entry(entry_id)) is not None:
-            return YellowMultiPanMigrationRepairFlow(hass, entry)
-
-    return ConfirmRepairFlow()
@@ -11,37 +11,6 @@
      }
    }
  },
-  "issues": {
-    "multi_pan_migration": {
-      "fix_flow": {
-        "abort": {
-          "addon_already_running": "[%key:component::homeassistant_hardware::silabs_multiprotocol_hardware::options::abort::addon_already_running%]",
-          "addon_info_failed": "[%key:component::homeassistant_hardware::silabs_multiprotocol_hardware::options::abort::addon_info_failed%]",
-          "addon_install_failed": "[%key:component::homeassistant_hardware::silabs_multiprotocol_hardware::options::abort::addon_install_failed%]",
-          "addon_set_config_failed": "[%key:component::homeassistant_hardware::silabs_multiprotocol_hardware::options::abort::addon_set_config_failed%]",
-          "addon_start_failed": "[%key:component::homeassistant_hardware::silabs_multiprotocol_hardware::options::abort::addon_start_failed%]",
-          "fw_install_failed": "[%key:component::homeassistant_hardware::firmware_picker::options::abort::fw_install_failed%]",
-          "not_hassio": "[%key:component::homeassistant_hardware::silabs_multiprotocol_hardware::options::abort::not_hassio%]",
-          "zha_migration_failed": "[%key:component::homeassistant_hardware::silabs_multiprotocol_hardware::options::abort::zha_migration_failed%]"
-        },
-        "progress": {
-          "install_addon": "[%key:component::homeassistant_hardware::silabs_multiprotocol_hardware::options::progress::install_addon%]",
-          "install_zigbee_firmware": "[%key:component::homeassistant_hardware::silabs_multiprotocol_hardware::options::progress::install_zigbee_firmware%]",
-          "uninstall_multiprotocol_addon": "[%key:component::homeassistant_hardware::silabs_multiprotocol_hardware::options::progress::uninstall_multiprotocol_addon%]"
-        },
-        "step": {
-          "uninstall_addon": {
-            "data": {
-              "disable_multi_pan": "[%key:component::homeassistant_hardware::silabs_multiprotocol_hardware::options::step::uninstall_addon::data::disable_multi_pan%]"
-            },
-            "description": "Multiprotocol support for the IEEE 802.15.4 radio in your {hardware_name} has been deprecated. Migrate the radio back to Zigbee-only firmware to keep it working in the future.\n\nDisabling multiprotocol support will disable Thread support provided by the {hardware_name}. Your Thread devices will continue working only if you have another Thread border router nearby.\n\nIt will take a few minutes to install the Zigbee firmware and restore a backup.",
-            "title": "[%key:component::homeassistant_hardware::silabs_multiprotocol_hardware::options::step::uninstall_addon::title%]"
-          }
-        }
-      },
-      "title": "Multiprotocol support is deprecated"
-    }
-  },
  "options": {
    "abort": {
      "addon_already_running": "[%key:component::homeassistant_hardware::silabs_multiprotocol_hardware::options::abort::addon_already_running%]",
@@ -68,10 +37,8 @@
      "install_addon": "[%key:component::homeassistant_hardware::silabs_multiprotocol_hardware::options::progress::install_addon%]",
      "install_firmware": "[%key:component::homeassistant_hardware::firmware_picker::options::progress::install_firmware%]",
      "install_otbr_addon": "[%key:component::homeassistant_hardware::firmware_picker::options::progress::install_otbr_addon%]",
-      "install_zigbee_firmware": "[%key:component::homeassistant_hardware::silabs_multiprotocol_hardware::options::progress::install_zigbee_firmware%]",
      "start_addon": "[%key:component::homeassistant_hardware::silabs_multiprotocol_hardware::options::progress::start_addon%]",
-      "start_otbr_addon": "[%key:component::homeassistant_hardware::firmware_picker::options::progress::start_otbr_addon%]",
-      "uninstall_multiprotocol_addon": "[%key:component::homeassistant_hardware::silabs_multiprotocol_hardware::options::progress::uninstall_multiprotocol_addon%]"
+      "start_otbr_addon": "[%key:component::homeassistant_hardware::firmware_picker::options::progress::start_otbr_addon%]"
    },
    "step": {
      "addon_installed_other_device": {
@@ -30,11 +30,6 @@ OPEN_CLOSE_ATTRIBUTES = [
    AttributeType.UP_DOWN,
 ]
 POSITION_ATTRIBUTES = [AttributeType.POSITION, AttributeType.SHUTTER_SLAT_POSITION]
-COVER_DEVICE_PROFILES = {
-    NodeProfile.GARAGE_DOOR_OPERATOR: CoverDeviceClass.GARAGE,
-    NodeProfile.ENTRANCE_GATE_OPERATOR: CoverDeviceClass.GATE,
-    NodeProfile.SHUTTER_POSITION_SWITCH: CoverDeviceClass.SHUTTER,
-}


 def get_open_close_attribute(node: HomeeNode) -> HomeeAttribute | None:
@@ -74,6 +69,12 @@ def get_cover_features(

 def get_device_class(node: HomeeNode) -> CoverDeviceClass | None:
    """Determine the device class a homee node based on the node profile."""
+    COVER_DEVICE_PROFILES = {
+        NodeProfile.GARAGE_DOOR_OPERATOR: CoverDeviceClass.GARAGE,
+        NodeProfile.ENTRANCE_GATE_OPERATOR: CoverDeviceClass.GATE,
+        NodeProfile.SHUTTER_POSITION_SWITCH: CoverDeviceClass.SHUTTER,
+    }
+
    return COVER_DEVICE_PROFILES.get(node.profile)


@@ -9,7 +9,7 @@ from homeassistant.helpers import config_validation as cv
 from homeassistant.helpers.automation import DomainSpec
 from homeassistant.helpers.entity import get_supported_features
 from homeassistant.helpers.trigger import (
-    ENTITY_STATE_TRIGGER_SCHEMA_WITH_BEHAVIOR,
+    ENTITY_STATE_TRIGGER_SCHEMA_FIRST_LAST,
    EntityTargetStateTriggerBase,
    Trigger,
    TriggerConfig,
@@ -18,7 +18,7 @@ from homeassistant.helpers.trigger import (

 from .const import ATTR_ACTION, DOMAIN, HumidifierAction, HumidifierEntityFeature

-MODE_CHANGED_TRIGGER_SCHEMA = ENTITY_STATE_TRIGGER_SCHEMA_WITH_BEHAVIOR.extend(
+MODE_CHANGED_TRIGGER_SCHEMA = ENTITY_STATE_TRIGGER_SCHEMA_FIRST_LAST.extend(
    {
        vol.Required(CONF_OPTIONS): {
            vol.Required(CONF_MODE): vol.All(cv.ensure_list, vol.Length(min=1), [str]),
@@ -5,7 +5,7 @@
  fields:
    behavior: &trigger_behavior
      required: true
-      default: each
+      default: any
      selector:
        automation_behavior:
          mode: trigger
@@ -1,7 +1,7 @@
 .trigger_common_fields:
  behavior: &trigger_behavior
    required: true
-    default: each
+    default: any
    selector:
      automation_behavior:
        mode: trigger
@@ -15,6 +15,7 @@ CONF_INFO = "info"
 CONF_INVERTING = "inverting"
 CONF_LIGHT = "light"
 CONF_NODE = "node"
+CONF_NOTE = "note"
 CONF_OFF_ID = "off_id"
 CONF_ON_ID = "on_id"
 CONF_POSITION = "position"
@@ -8,7 +8,6 @@ from homeassistant.components.binary_sensor import DEVICE_CLASSES_SCHEMA
 from homeassistant.const import (
    CONF_ID,
    CONF_NAME,
-    CONF_NOTE,
    CONF_PASSWORD,
    CONF_TYPE,
    CONF_UNIT_OF_MEASUREMENT,
@@ -26,6 +25,7 @@ from .const import (
    CONF_INFO,
    CONF_INVERTING,
    CONF_LIGHT,
+    CONF_NOTE,
    CONF_OFF_ID,
    CONF_ON_ID,
    CONF_POSITION,
@@ -1,7 +1,7 @@
 .trigger_common_fields: &trigger_common_fields
  behavior: &trigger_behavior
    required: true
-    default: each
+    default: any
    selector:
      automation_behavior:
        mode: trigger
@@ -2,7 +2,7 @@

 from collections.abc import Callable
 from dataclasses import dataclass
-from typing import Any, override
+from typing import Any

 from incomfortclient import Heater as InComfortHeater

@@ -97,13 +97,11 @@ class IncomfortBinarySensor(IncomfortBoilerEntity, BinarySensorEntity):
        self._attr_unique_id = f"{heater.serial_no}_{description.key}"

    @property
-    @override
    def is_on(self) -> bool:
        """Return the status of the sensor."""
        return bool(self._heater.status[self.entity_description.value_key])

    @property
-    @override
    def extra_state_attributes(self) -> dict[str, Any] | None:
        """Return the device state attributes."""
        if (attributes_fn := self.entity_description.extra_state_attributes_fn) is None:
@@ -1,6 +1,6 @@
 """Support for an Intergas boiler via an InComfort/InTouch Lan2RF gateway."""

-from typing import Any, override
+from typing import Any

 from incomfortclient import Heater as InComfortHeater, Room as InComfortRoom

@@ -76,19 +76,16 @@ class InComfortClimate(IncomfortEntity, ClimateEntity):
            )

    @property
-    @override
    def extra_state_attributes(self) -> dict[str, Any]:
        """Return the device state attributes."""
        return {"status": self._room.status}

    @property
-    @override
    def current_temperature(self) -> float | None:
        """Return the current temperature."""
        return self._room.room_temp

    @property
-    @override
    def hvac_action(self) -> HVACAction | None:
        """Return the actual current HVAC action."""
        if self._heater.is_burning and self._heater.is_pumping:
@@ -96,7 +93,6 @@ class InComfortClimate(IncomfortEntity, ClimateEntity):
        return HVACAction.IDLE

    @property
-    @override
    def target_temperature(self) -> float | None:
        """Return the (override)temperature we try to reach.

@@ -110,13 +106,11 @@ class InComfortClimate(IncomfortEntity, ClimateEntity):
            return self._room.setpoint
        return self._room.override or self._room.setpoint

-    @override
    async def async_set_temperature(self, **kwargs: Any) -> None:
        """Set a new target temperature for this zone."""
        temperature: float = kwargs[ATTR_TEMPERATURE]
        await self._room.set_override(temperature)
        await self.coordinator.async_refresh()

-    @override
    async def async_set_hvac_mode(self, hvac_mode: HVACMode) -> None:
        """Set new target hvac mode."""
@@ -2,7 +2,7 @@

 from collections.abc import Mapping
 import logging
-from typing import Any, override
+from typing import Any

 from incomfortclient import InvalidGateway, InvalidHeaterList
 import voluptuous as vol
@@ -100,7 +100,6 @@ class InComfortConfigFlow(ConfigFlow, domain=DOMAIN):

    _discovered_host: str

-    @override
    @staticmethod
    @callback
    def async_get_options_flow(
@@ -109,7 +108,6 @@ class InComfortConfigFlow(ConfigFlow, domain=DOMAIN):
        """Get the options flow for this handler."""
        return InComfortOptionsFlowHandler()

-    @override
    async def async_step_dhcp(
        self, discovery_info: DhcpServiceInfo
    ) -> ConfigFlowResult:
@@ -171,7 +169,6 @@ class InComfortConfigFlow(ConfigFlow, domain=DOMAIN):
            description_placeholders={CONF_HOST: self._discovered_host},
        )

-    @override
    async def async_step_user(
        self, user_input: dict[str, Any] | None = None
    ) -> ConfigFlowResult:
@@ -3,7 +3,7 @@
 from dataclasses import dataclass, field
 from datetime import timedelta
 import logging
-from typing import Any, override
+from typing import Any

 from aiohttp import ClientResponseError
 from incomfortclient import (
@@ -74,7 +74,6 @@ class InComfortDataCoordinator(DataUpdateCoordinator[InComfortData]):
        )
        self.incomfort_data = incomfort_data

-    @override
    async def _async_update_data(self) -> InComfortData:
        """Fetch data from API endpoint."""
        try:
@@ -1,7 +1,7 @@
 """Support for an Intergas heater via an InComfort/InTouch Lan2RF gateway."""

 from dataclasses import dataclass
-from typing import Any, override
+from typing import Any

 from incomfortclient import Heater as InComfortHeater

@@ -104,13 +104,11 @@ class IncomfortSensor(IncomfortBoilerEntity, SensorEntity):
        self._attr_unique_id = f"{heater.serial_no}_{description.key}"

    @property
-    @override
    def native_value(self) -> StateType:
        """Return the state of the sensor."""
        return self._heater.status[self.entity_description.value_key]  # type: ignore [no-any-return]

    @property
-    @override
    def extra_state_attributes(self) -> dict[str, Any] | None:
        """Return the device state attributes."""
        if (extra_key := self.entity_description.extra_key) is None:
@@ -1,7 +1,7 @@
 """Support for an Intergas boiler via an InComfort/Intouch Lan2RF gateway."""

 import logging
-from typing import Any, override
+from typing import Any

 from incomfortclient import Heater as InComfortHeater

@@ -49,13 +49,11 @@ class IncomfortWaterHeater(IncomfortBoilerEntity, WaterHeaterEntity):
        self._attr_unique_id = heater.serial_no

    @property
-    @override
    def extra_state_attributes(self) -> dict[str, Any]:
        """Return the device state attributes."""
        return {k: v for k, v in self._heater.status.items() if k in HEATER_ATTRS}

    @property
-    @override
    def current_temperature(self) -> float | None:
        """Return the current temperature."""
        if self._heater.is_tapping:
@@ -69,7 +67,6 @@ class IncomfortWaterHeater(IncomfortBoilerEntity, WaterHeaterEntity):
        return max(self._heater.heater_temp, self._heater.tap_temp)

    @property
-    @override
    def current_operation(self) -> str | None:
        """Return the current operation mode."""
        return self._heater.display_text
@@ -32,7 +32,6 @@ SENSOR_KEYS: Final[dict[int, list[str]]] = {
        IndevoltSystem.OFF_GRID_OUTPUT_ENERGY,
        IndevoltSystem.BYPASS_POWER,
        IndevoltSystem.BYPASS_INPUT_ENERGY,
-        IndevoltBattery.RATED_CAPACITY,
        IndevoltBattery.DAILY_CHARGING_ENERGY,
        IndevoltBattery.DAILY_DISCHARGING_ENERGY,
        IndevoltBattery.TOTAL_CHARGING_ENERGY,
@@ -79,7 +78,7 @@ SENSOR_KEYS: Final[dict[int, list[str]]] = {
        IndevoltSolar.DC_INPUT_POWER_2,
        IndevoltSolar.DC_INPUT_POWER_3,
        IndevoltSolar.DC_INPUT_POWER_4,
-        IndevoltBattery.RATED_CAPACITY,
+        IndevoltBattery.RATED_CAPACITY_GEN2,
        IndevoltSystem.BYPASS_POWER,
        IndevoltSystem.TOTAL_OUTPUT_ENERGY,
        IndevoltSystem.OFF_GRID_OUTPUT_ENERGY,
@@ -135,12 +134,6 @@ SENSOR_KEYS: Final[dict[int, list[str]]] = {
        IndevoltBattery.PACK_3_CURRENT,
        IndevoltBattery.PACK_4_CURRENT,
        IndevoltBattery.PACK_5_CURRENT,
-        IndevoltBattery.MAIN_CYCLES,
-        IndevoltBattery.PACK_1_CYCLES,
-        IndevoltBattery.PACK_2_CYCLES,
-        IndevoltBattery.PACK_3_CYCLES,
-        IndevoltBattery.PACK_4_CYCLES,
-        IndevoltBattery.PACK_5_CYCLES,
        IndevoltConfig.READ_BYPASS,
        IndevoltConfig.READ_GRID_CHARGING,
        IndevoltConfig.READ_LIGHT,
@@ -1,7 +1,6 @@
 """Home Assistant integration for Indevolt device."""

 from datetime import timedelta
-import itertools
 import logging
 from typing import Any, Final

@@ -30,7 +29,6 @@ from .const import (
 )

 _LOGGER = logging.getLogger(__name__)
-SCAN_BATCH_SIZE: Final = 50
 SCAN_INTERVAL: Final = 30

 type IndevoltConfigEntry = ConfigEntry[IndevoltCoordinator]
@@ -88,13 +86,10 @@ class IndevoltCoordinator(DataUpdateCoordinator[dict[str, Any]]):

    async def _async_update_data(self) -> dict[str, Any]:
        """Fetch raw JSON data from the device."""
-        data: dict[str, Any] = {}
        sensor_keys = SENSOR_KEYS[self.generation]

        try:
-            for chunk in itertools.batched(sensor_keys, SCAN_BATCH_SIZE, strict=False):
-                data.update(await self.api.fetch_data(list(chunk)))
-
+            return await self.api.fetch_data(sensor_keys)
        except (ClientError, OSError) as err:
            raise UpdateFailed(
                translation_domain=DOMAIN,
@@ -102,9 +97,6 @@ class IndevoltCoordinator(DataUpdateCoordinator[dict[str, Any]]):
                translation_placeholders={"error": str(err)},
            ) from err

-        else:
-            return data
-
    async def async_push_data(self, sensor_key: str, value: Any) -> bool:
        """Push/write data values to given key on the device."""
        return await self.api.set_data(sensor_key, value)
@@ -73,10 +73,12 @@ SENSORS: Final = (
        device_class=SensorDeviceClass.ENUM,
    ),
    IndevoltSensorEntityDescription(
-        key=IndevoltBattery.RATED_CAPACITY,
+        key=IndevoltBattery.RATED_CAPACITY_GEN2,
+        generation=(2,),
        translation_key="rated_capacity",
        native_unit_of_measurement=UnitOfEnergy.KILO_WATT_HOUR,
        device_class=SensorDeviceClass.ENERGY,
+        state_class=SensorStateClass.TOTAL_INCREASING,
    ),
    IndevoltSensorEntityDescription(
        key=IndevoltConfig.READ_DISCHARGE_LIMIT,
@@ -130,7 +132,7 @@ SENSORS: Final = (
    IndevoltSensorEntityDescription(
        key=IndevoltBattery.GEN_2_CYCLE_COUNT,
        generation=(2,),
-        translation_key="equivalent_full_cycles",
+        translation_key="cycle_count",
        state_class=SensorStateClass.TOTAL_INCREASING,
        entity_category=EntityCategory.DIAGNOSTIC,
        entity_registry_enabled_default=False,
@@ -792,58 +794,9 @@ SENSORS: Final = (
        entity_category=EntityCategory.DIAGNOSTIC,
        entity_registry_enabled_default=False,
    ),
-    # Battery Pack Cycles
-    IndevoltSensorEntityDescription(
-        key=IndevoltBattery.MAIN_CYCLES,
-        generation=(2,),
-        translation_key="main_cycles",
-        state_class=SensorStateClass.TOTAL_INCREASING,
-        entity_category=EntityCategory.DIAGNOSTIC,
-        entity_registry_enabled_default=False,
-    ),
-    IndevoltSensorEntityDescription(
-        key=IndevoltBattery.PACK_1_CYCLES,
-        generation=(2,),
-        translation_key="battery_pack_1_cycles",
-        state_class=SensorStateClass.TOTAL_INCREASING,
-        entity_category=EntityCategory.DIAGNOSTIC,
-        entity_registry_enabled_default=False,
-    ),
-    IndevoltSensorEntityDescription(
-        key=IndevoltBattery.PACK_2_CYCLES,
-        generation=(2,),
-        translation_key="battery_pack_2_cycles",
-        state_class=SensorStateClass.TOTAL_INCREASING,
-        entity_category=EntityCategory.DIAGNOSTIC,
-        entity_registry_enabled_default=False,
-    ),
-    IndevoltSensorEntityDescription(
-        key=IndevoltBattery.PACK_3_CYCLES,
-        generation=(2,),
-        translation_key="battery_pack_3_cycles",
-        state_class=SensorStateClass.TOTAL_INCREASING,
-        entity_category=EntityCategory.DIAGNOSTIC,
-        entity_registry_enabled_default=False,
-    ),
-    IndevoltSensorEntityDescription(
-        key=IndevoltBattery.PACK_4_CYCLES,
-        generation=(2,),
-        translation_key="battery_pack_4_cycles",
-        state_class=SensorStateClass.TOTAL_INCREASING,
-        entity_category=EntityCategory.DIAGNOSTIC,
-        entity_registry_enabled_default=False,
-    ),
-    IndevoltSensorEntityDescription(
-        key=IndevoltBattery.PACK_5_CYCLES,
-        generation=(2,),
-        translation_key="battery_pack_5_cycles",
-        state_class=SensorStateClass.TOTAL_INCREASING,
-        entity_category=EntityCategory.DIAGNOSTIC,
-        entity_registry_enabled_default=False,
-    ),
 )

-# Sensors per battery pack (SN, SOC, Temperature, MOS Temperature, Voltage, Current, Cycles)
+# Sensors per battery pack (SN, SOC, Temperature, MOS Temperature, Voltage, Current)
 BATTERY_PACK_SENSOR_KEYS = [
    (
        IndevoltBattery.PACK_1_SERIAL_NUMBER,
@@ -852,7 +805,6 @@ BATTERY_PACK_SENSOR_KEYS = [
        IndevoltBattery.PACK_1_MOS_TEMPERATURE,
        IndevoltBattery.PACK_1_VOLTAGE,
        IndevoltBattery.PACK_1_CURRENT,
-        IndevoltBattery.PACK_1_CYCLES,
    ),
    (
        IndevoltBattery.PACK_2_SERIAL_NUMBER,
@@ -861,7 +813,6 @@ BATTERY_PACK_SENSOR_KEYS = [
        IndevoltBattery.PACK_2_MOS_TEMPERATURE,
        IndevoltBattery.PACK_2_VOLTAGE,
        IndevoltBattery.PACK_2_CURRENT,
-        IndevoltBattery.PACK_2_CYCLES,
    ),
    (
        IndevoltBattery.PACK_3_SERIAL_NUMBER,
@@ -870,7 +821,6 @@ BATTERY_PACK_SENSOR_KEYS = [
        IndevoltBattery.PACK_3_MOS_TEMPERATURE,
        IndevoltBattery.PACK_3_VOLTAGE,
        IndevoltBattery.PACK_3_CURRENT,
-        IndevoltBattery.PACK_3_CYCLES,
    ),
    (
        IndevoltBattery.PACK_4_SERIAL_NUMBER,
@@ -879,7 +829,6 @@ BATTERY_PACK_SENSOR_KEYS = [
        IndevoltBattery.PACK_4_MOS_TEMPERATURE,
        IndevoltBattery.PACK_4_VOLTAGE,
        IndevoltBattery.PACK_4_CURRENT,
-        IndevoltBattery.PACK_4_CYCLES,
    ),
    (
        IndevoltBattery.PACK_5_SERIAL_NUMBER,
@@ -888,7 +837,6 @@ BATTERY_PACK_SENSOR_KEYS = [
        IndevoltBattery.PACK_5_MOS_TEMPERATURE,
        IndevoltBattery.PACK_5_VOLTAGE,
        IndevoltBattery.PACK_5_CURRENT,
-        IndevoltBattery.PACK_5_CYCLES,
    ),
 ]

@@ -118,9 +118,6 @@
      "battery_pack_1_current": {
        "name": "Battery pack 1 current"
      },
-      "battery_pack_1_cycles": {
-        "name": "Battery pack 1 cycle count"
-      },
      "battery_pack_1_mos_temperature": {
        "name": "Battery pack 1 MOS temperature"
      },
@@ -139,9 +136,6 @@
      "battery_pack_2_current": {
        "name": "Battery pack 2 current"
      },
-      "battery_pack_2_cycles": {
-        "name": "Battery pack 2 cycle count"
-      },
      "battery_pack_2_mos_temperature": {
        "name": "Battery pack 2 MOS temperature"
      },
@@ -160,9 +154,6 @@
      "battery_pack_3_current": {
        "name": "Battery pack 3 current"
      },
-      "battery_pack_3_cycles": {
-        "name": "Battery pack 3 cycle count"
-      },
      "battery_pack_3_mos_temperature": {
        "name": "Battery pack 3 MOS temperature"
      },
@@ -181,9 +172,6 @@
      "battery_pack_4_current": {
        "name": "Battery pack 4 current"
      },
-      "battery_pack_4_cycles": {
-        "name": "Battery pack 4 cycle count"
-      },
      "battery_pack_4_mos_temperature": {
        "name": "Battery pack 4 MOS temperature"
      },
@@ -202,9 +190,6 @@
      "battery_pack_5_current": {
        "name": "Battery pack 5 current"
      },
-      "battery_pack_5_cycles": {
-        "name": "Battery pack 5 cycle count"
-      },
      "battery_pack_5_mos_temperature": {
        "name": "Battery pack 5 MOS temperature"
      },
@@ -241,6 +226,9 @@
      "cumulative_production": {
        "name": "Cumulative production"
      },
+      "cycle_count": {
+        "name": "Cycle count"
+      },
      "daily_production": {
        "name": "Daily production"
      },
@@ -295,9 +283,6 @@
          "self_consumed_prioritized": "Self-consumed prioritized"
        }
      },
-      "equivalent_full_cycles": {
-        "name": "Equivalent full cycles"
-      },
      "grid_frequency": {
        "name": "Grid frequency"
      },
@@ -310,9 +295,6 @@
      "main_current": {
        "name": "Main current"
      },
-      "main_cycles": {
-        "name": "Main cycle count"
-      },
      "main_mos_temperature": {
        "name": "Main MOS temperature"
      },
@@ -5,5 +5,5 @@
  "documentation": "https://www.home-assistant.io/integrations/infrared",
  "integration_type": "entity",
  "quality_scale": "internal",
-  "requirements": ["infrared-protocols==5.6.1"]
+  "requirements": ["infrared-protocols==5.6.0"]
 }
@@ -30,8 +30,8 @@ def log_rate_limits(
 ) -> None:
    """Output rate limit log line at given level."""
    rate_limits = resp["rateLimits"]
-    resets_at = dt_util.parse_datetime(rate_limits["resetsAt"])
-    resets_at_time = resets_at - dt_util.utcnow() if resets_at is not None else "---"
+    resetsAt = dt_util.parse_datetime(rate_limits["resetsAt"])
+    resetsAtTime = resetsAt - dt_util.utcnow() if resetsAt is not None else "---"
    rate_limit_msg = (
        "iOS push notification rate limits for %s: "
        "%d sent, %d allowed, %d errors, "
@@ -44,7 +44,7 @@ def log_rate_limits(
        rate_limits["successful"],
        rate_limits["maximum"],
        rate_limits["errors"],
-        str(resets_at_time).split(".", maxsplit=1)[0],
+        str(resetsAtTime).split(".", maxsplit=1)[0],
    )


--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
Paul Bottein	c8515c04d5	Add card prefix	2026-05-27 21:16:04 +02:00
Paul Bottein	dd86e84470	Fix comments and bump lib	2026-05-27 10:49:39 +02:00
Paul Bottein	b9f98274af	Improve tests	2026-05-27 10:16:54 +02:00
Paul Bottein	02c7582fb6	Fix media type	2026-05-27 10:08:26 +02:00
Paul Bottein	00ebccf168	Add browse and play media support to Yoto	2026-05-27 00:20:42 +02:00