Remove merge conflict leftovers

homeassistant/components/knx/binary_sensor.py

@@ -114,24 +114,26 @@ class KnxYamlBinarySensor(_KnxBinarySensor, KnxYamlEntity):
 
     def __init__(self, knx_module: KNXModule, config: ConfigType) -> None:
         """Initialize of KNX binary sensor."""
+        self._device = XknxBinarySensor(
+            xknx=knx_module.xknx,
+            name=config[CONF_NAME],
+            group_address_state=config[CONF_STATE_ADDRESS],
+            invert=config[CONF_INVERT],
+            sync_state=config[CONF_SYNC_STATE],
+            ignore_internal_state=config[CONF_IGNORE_INTERNAL_STATE],
+            context_timeout=config.get(CONF_CONTEXT_TIMEOUT),
+            reset_after=config.get(CONF_RESET_AFTER),
+            always_callback=True,
+        )
         super().__init__(
             knx_module=knx_module,
-            device=XknxBinarySensor(
-                xknx=knx_module.xknx,
-                name=config[CONF_NAME],
-                group_address_state=config[CONF_STATE_ADDRESS],
-                invert=config[CONF_INVERT],
-                sync_state=config[CONF_SYNC_STATE],
-                ignore_internal_state=config[CONF_IGNORE_INTERNAL_STATE],
-                context_timeout=config.get(CONF_CONTEXT_TIMEOUT),
-                reset_after=config.get(CONF_RESET_AFTER),
-                always_callback=True,
-            ),
+            unique_id=str(self._device.remote_value.group_address_state),
+            name=config[CONF_NAME],
+            entity_category=config.get(CONF_ENTITY_CATEGORY),
         )
-        self._attr_entity_category = config.get(CONF_ENTITY_CATEGORY)
+
         self._attr_device_class = config.get(CONF_DEVICE_CLASS)
         self._attr_force_update = self._device.ignore_internal_state
-        self._attr_unique_id = str(self._device.remote_value.group_address_state)
 
 
 class KnxUiBinarySensor(_KnxBinarySensor, KnxUiEntity):

homeassistant/components/knx/button.py

@@ -35,19 +35,18 @@ class KNXButton(KnxYamlEntity, ButtonEntity):
 
     def __init__(self, knx_module: KNXModule, config: ConfigType) -> None:
         """Initialize a KNX button."""
-        super().__init__(
-            knx_module=knx_module,
-            device=XknxRawValue(
-                xknx=knx_module.xknx,
-                name=config[CONF_NAME],
-                payload_length=config[CONF_PAYLOAD_LENGTH],
-                group_address=config[KNX_ADDRESS],
-            ),
+        self._device = XknxRawValue(
+            xknx=knx_module.xknx,
+            name=config[CONF_NAME],
+            payload_length=config[CONF_PAYLOAD_LENGTH],
+            group_address=config[KNX_ADDRESS],
         )
         self._payload = config[CONF_PAYLOAD]
-        self._attr_entity_category = config.get(CONF_ENTITY_CATEGORY)
-        self._attr_unique_id = (
-            f"{self._device.remote_value.group_address}_{self._payload}"
+        super().__init__(
+            knx_module=knx_module,
+            unique_id=f"{self._device.remote_value.group_address}_{self._payload}",
+            name=config[CONF_NAME],
+            entity_category=config.get(CONF_ENTITY_CATEGORY),
         )
 
     async def async_press(self) -> None:

homeassistant/components/knx/climate.py

@@ -119,7 +119,7 @@ async def async_setup_entry(
         async_add_entities(entities)
 
 
-def _create_climate(xknx: XKNX, config: ConfigType) -> XknxClimate:
+def _create_climate_yaml(xknx: XKNX, config: ConfigType) -> XknxClimate:
     """Return a KNX Climate device to be used within XKNX."""
     climate_mode = XknxClimateMode(
         xknx,
@@ -646,9 +646,17 @@ class KnxYamlClimate(_KnxClimate, KnxYamlEntity):
 
     def __init__(self, knx_module: KNXModule, config: ConfigType) -> None:
         """Initialize of a KNX climate device."""
+        self._device = _create_climate_yaml(knx_module.xknx, config)
         super().__init__(
             knx_module=knx_module,
-            device=_create_climate(knx_module.xknx, config),
+            unique_id=(
+                f"{self._device.temperature.group_address_state}_"
+                f"{self._device.target_temperature.group_address_state}_"
+                f"{self._device.target_temperature.group_address}_"
+                f"{self._device._setpoint_shift.group_address}"  # noqa: SLF001
+            ),
+            name=config[CONF_NAME],
+            entity_category=config.get(CONF_ENTITY_CATEGORY),
         )
         default_hvac_mode: HVACMode = config[ClimateConf.DEFAULT_CONTROLLER_MODE]
         fan_max_step = config[ClimateConf.FAN_MAX_STEP]
@@ -660,14 +668,6 @@ class KnxYamlClimate(_KnxClimate, KnxYamlEntity):
             fan_zero_mode=fan_zero_mode,
         )
 
-        self._attr_entity_category = config.get(CONF_ENTITY_CATEGORY)
-        self._attr_unique_id = (
-            f"{self._device.temperature.group_address_state}_"
-            f"{self._device.target_temperature.group_address_state}_"
-            f"{self._device.target_temperature.group_address}_"
-            f"{self._device._setpoint_shift.group_address}"  # noqa: SLF001
-        )
-
 
 class KnxUiClimate(_KnxClimate, KnxUiEntity):
     """Representation of a KNX climate device configured from the UI."""

homeassistant/components/knx/cover.py

@@ -191,36 +191,34 @@ class KnxYamlCover(_KnxCover, KnxYamlEntity):
 
     def __init__(self, knx_module: KNXModule, config: ConfigType) -> None:
         """Initialize the cover."""
+        self._device = XknxCover(
+            xknx=knx_module.xknx,
+            name=config[CONF_NAME],
+            group_address_long=config.get(CoverSchema.CONF_MOVE_LONG_ADDRESS),
+            group_address_short=config.get(CoverSchema.CONF_MOVE_SHORT_ADDRESS),
+            group_address_stop=config.get(CoverSchema.CONF_STOP_ADDRESS),
+            group_address_position_state=config.get(
+                CoverSchema.CONF_POSITION_STATE_ADDRESS
+            ),
+            group_address_angle=config.get(CoverSchema.CONF_ANGLE_ADDRESS),
+            group_address_angle_state=config.get(CoverSchema.CONF_ANGLE_STATE_ADDRESS),
+            group_address_position=config.get(CoverSchema.CONF_POSITION_ADDRESS),
+            travel_time_down=config[CoverConf.TRAVELLING_TIME_DOWN],
+            travel_time_up=config[CoverConf.TRAVELLING_TIME_UP],
+            invert_updown=config[CoverConf.INVERT_UPDOWN],
+            invert_position=config[CoverConf.INVERT_POSITION],
+            invert_angle=config[CoverConf.INVERT_ANGLE],
+        )
         super().__init__(
             knx_module=knx_module,
-            device=XknxCover(
-                xknx=knx_module.xknx,
-                name=config[CONF_NAME],
-                group_address_long=config.get(CoverSchema.CONF_MOVE_LONG_ADDRESS),
-                group_address_short=config.get(CoverSchema.CONF_MOVE_SHORT_ADDRESS),
-                group_address_stop=config.get(CoverSchema.CONF_STOP_ADDRESS),
-                group_address_position_state=config.get(
-                    CoverSchema.CONF_POSITION_STATE_ADDRESS
-                ),
-                group_address_angle=config.get(CoverSchema.CONF_ANGLE_ADDRESS),
-                group_address_angle_state=config.get(
-                    CoverSchema.CONF_ANGLE_STATE_ADDRESS
-                ),
-                group_address_position=config.get(CoverSchema.CONF_POSITION_ADDRESS),
-                travel_time_down=config[CoverConf.TRAVELLING_TIME_DOWN],
-                travel_time_up=config[CoverConf.TRAVELLING_TIME_UP],
-                invert_updown=config[CoverConf.INVERT_UPDOWN],
-                invert_position=config[CoverConf.INVERT_POSITION],
-                invert_angle=config[CoverConf.INVERT_ANGLE],
+            unique_id=(
+                f"{self._device.updown.group_address}_"
+                f"{self._device.position_target.group_address}"
             ),
+            name=config[CONF_NAME],
+            entity_category=config.get(CONF_ENTITY_CATEGORY),
         )
         self.init_base()
-
-        self._attr_entity_category = config.get(CONF_ENTITY_CATEGORY)
-        self._attr_unique_id = (
-            f"{self._device.updown.group_address}_"
-            f"{self._device.position_target.group_address}"
-        )
         if custom_device_class := config.get(CONF_DEVICE_CLASS):
             self._attr_device_class = custom_device_class
 

homeassistant/components/knx/date.py

@@ -105,20 +105,21 @@ class KnxYamlDate(_KNXDate, KnxYamlEntity):
 
     def __init__(self, knx_module: KNXModule, config: ConfigType) -> None:
         """Initialize a KNX date."""
+        self._device = XknxDateDevice(
+            knx_module.xknx,
+            name=config[CONF_NAME],
+            localtime=False,
+            group_address=config[KNX_ADDRESS],
+            group_address_state=config.get(CONF_STATE_ADDRESS),
+            respond_to_read=config[CONF_RESPOND_TO_READ],
+            sync_state=config[CONF_SYNC_STATE],
+        )
         super().__init__(
             knx_module=knx_module,
-            device=XknxDateDevice(
-                knx_module.xknx,
-                name=config[CONF_NAME],
-                localtime=False,
-                group_address=config[KNX_ADDRESS],
-                group_address_state=config.get(CONF_STATE_ADDRESS),
-                respond_to_read=config[CONF_RESPOND_TO_READ],
-                sync_state=config[CONF_SYNC_STATE],
-            ),
+            unique_id=str(self._device.remote_value.group_address),
+            name=config[CONF_NAME],
+            entity_category=config.get(CONF_ENTITY_CATEGORY),
         )
-        self._attr_entity_category = config.get(CONF_ENTITY_CATEGORY)
-        self._attr_unique_id = str(self._device.remote_value.group_address)
 
 
 class KnxUiDate(_KNXDate, KnxUiEntity):

homeassistant/components/knx/datetime.py

@@ -110,20 +110,21 @@ class KnxYamlDateTime(_KNXDateTime, KnxYamlEntity):
 
     def __init__(self, knx_module: KNXModule, config: ConfigType) -> None:
         """Initialize a KNX datetime."""
+        self._device = XknxDateTimeDevice(
+            knx_module.xknx,
+            name=config[CONF_NAME],
+            localtime=False,
+            group_address=config[KNX_ADDRESS],
+            group_address_state=config.get(CONF_STATE_ADDRESS),
+            respond_to_read=config[CONF_RESPOND_TO_READ],
+            sync_state=config[CONF_SYNC_STATE],
+        )
         super().__init__(
             knx_module=knx_module,
-            device=XknxDateTimeDevice(
-                knx_module.xknx,
-                name=config[CONF_NAME],
-                localtime=False,
-                group_address=config[KNX_ADDRESS],
-                group_address_state=config.get(CONF_STATE_ADDRESS),
-                respond_to_read=config[CONF_RESPOND_TO_READ],
-                sync_state=config[CONF_SYNC_STATE],
-            ),
+            unique_id=str(self._device.remote_value.group_address),
+            name=config[CONF_NAME],
+            entity_category=config.get(CONF_ENTITY_CATEGORY),
         )
-        self._attr_entity_category = config.get(CONF_ENTITY_CATEGORY)
-        self._attr_unique_id = str(self._device.remote_value.group_address)
 
 
 class KnxUiDateTime(_KNXDateTime, KnxUiEntity):

homeassistant/components/knx/entity.py

@@ -6,7 +6,7 @@ from typing import TYPE_CHECKING, Any
 
 from xknx.devices import Device as XknxDevice
 
-from homeassistant.const import CONF_ENTITY_CATEGORY, EntityCategory
+from homeassistant.const import CONF_ENTITY_CATEGORY, CONF_NAME, EntityCategory
 from homeassistant.helpers.device_registry import DeviceInfo
 from homeassistant.helpers.entity import Entity
 from homeassistant.helpers.entity_platform import EntityPlatform
@@ -52,14 +52,11 @@ class _KnxEntityBase(Entity):
     """Representation of a KNX entity."""
 
     _attr_should_poll = False
+
+    _attr_unique_id: str
     _knx_module: KNXModule
     _device: XknxDevice
 
-    @property
-    def name(self) -> str:
-        """Return the name of the KNX device."""
-        return self._device.name
-
     @property
     def available(self) -> bool:
         """Return True if entity is available."""
@@ -100,16 +97,23 @@ class _KnxEntityBase(Entity):
 class KnxYamlEntity(_KnxEntityBase):
     """Representation of a KNX entity configured from YAML."""
 
-    def __init__(self, knx_module: KNXModule, device: XknxDevice) -> None:
+    def __init__(
+        self,
+        knx_module: KNXModule,
+        unique_id: str,
+        name: str,
+        entity_category: EntityCategory | None,
+    ) -> None:
         """Initialize the YAML entity."""
         self._knx_module = knx_module
-        self._device = device
+        self._attr_name = name or None
+        self._attr_unique_id = unique_id
+        self._attr_entity_category = entity_category
 
 
 class KnxUiEntity(_KnxEntityBase):
     """Representation of a KNX UI entity."""
 
-    _attr_unique_id: str
     _attr_has_entity_name = True
 
     def __init__(
@@ -117,6 +121,8 @@ class KnxUiEntity(_KnxEntityBase):
     ) -> None:
         """Initialize the UI entity."""
         self._knx_module = knx_module
+
+        self._attr_name = entity_config[CONF_NAME]
         self._attr_unique_id = unique_id
         if entity_category := entity_config.get(CONF_ENTITY_CATEGORY):
             self._attr_entity_category = EntityCategory(entity_category)

homeassistant/components/knx/fan.py

@@ -208,35 +208,32 @@ class KnxYamlFan(_KnxFan, KnxYamlEntity):
     def __init__(self, knx_module: KNXModule, config: ConfigType) -> None:
         """Initialize of KNX fan."""
         max_step = config.get(FanConf.MAX_STEP)
+        self._device = XknxFan(
+            xknx=knx_module.xknx,
+            name=config[CONF_NAME],
+            group_address_speed=config.get(KNX_ADDRESS),
+            group_address_speed_state=config.get(FanSchema.CONF_STATE_ADDRESS),
+            group_address_oscillation=config.get(FanSchema.CONF_OSCILLATION_ADDRESS),
+            group_address_oscillation_state=config.get(
+                FanSchema.CONF_OSCILLATION_STATE_ADDRESS
+            ),
+            group_address_switch=config.get(FanSchema.CONF_SWITCH_ADDRESS),
+            group_address_switch_state=config.get(FanSchema.CONF_SWITCH_STATE_ADDRESS),
+            max_step=max_step,
+            sync_state=config.get(CONF_SYNC_STATE, True),
+        )
         super().__init__(
             knx_module=knx_module,
-            device=XknxFan(
-                xknx=knx_module.xknx,
-                name=config[CONF_NAME],
-                group_address_speed=config.get(KNX_ADDRESS),
-                group_address_speed_state=config.get(FanSchema.CONF_STATE_ADDRESS),
-                group_address_oscillation=config.get(
-                    FanSchema.CONF_OSCILLATION_ADDRESS
-                ),
-                group_address_oscillation_state=config.get(
-                    FanSchema.CONF_OSCILLATION_STATE_ADDRESS
-                ),
-                group_address_switch=config.get(FanSchema.CONF_SWITCH_ADDRESS),
-                group_address_switch_state=config.get(
-                    FanSchema.CONF_SWITCH_STATE_ADDRESS
-                ),
-                max_step=max_step,
-                sync_state=config.get(CONF_SYNC_STATE, True),
+            unique_id=(
+                str(self._device.speed.group_address)
+                if self._device.speed.group_address
+                else str(self._device.switch.group_address)
             ),
+            name=config[CONF_NAME],
+            entity_category=config.get(CONF_ENTITY_CATEGORY),
         )
         # FanSpeedMode.STEP if max_step is set
         self._step_range: tuple[int, int] | None = (1, max_step) if max_step else None
-        self._attr_entity_category = config.get(CONF_ENTITY_CATEGORY)
-
-        if self._device.speed.group_address:
-            self._attr_unique_id = str(self._device.speed.group_address)
-        else:
-            self._attr_unique_id = str(self._device.switch.group_address)
 
 
 class KnxUiFan(_KnxFan, KnxUiEntity):

homeassistant/components/knx/light.py

@@ -558,15 +558,16 @@ class KnxYamlLight(_KnxLight, KnxYamlEntity):
 
     def __init__(self, knx_module: KNXModule, config: ConfigType) -> None:
         """Initialize of KNX light."""
+        self._device = _create_yaml_light(knx_module.xknx, config)
         super().__init__(
             knx_module=knx_module,
-            device=_create_yaml_light(knx_module.xknx, config),
+            unique_id=self._device_unique_id(),
+            name=config[CONF_NAME],
+            entity_category=config.get(CONF_ENTITY_CATEGORY),
         )
         self._attr_color_mode = next(iter(self.supported_color_modes))
         self._attr_max_color_temp_kelvin: int = config[LightSchema.CONF_MAX_KELVIN]
         self._attr_min_color_temp_kelvin: int = config[LightSchema.CONF_MIN_KELVIN]
-        self._attr_entity_category = config.get(CONF_ENTITY_CATEGORY)
-        self._attr_unique_id = self._device_unique_id()
 
     def _device_unique_id(self) -> str:
         """Return unique id for this device."""

homeassistant/components/knx/notify.py

@@ -46,12 +46,13 @@ class KNXNotify(KnxYamlEntity, NotifyEntity):
 
     def __init__(self, knx_module: KNXModule, config: ConfigType) -> None:
         """Initialize a KNX notification."""
+        self._device = _create_notification_instance(knx_module.xknx, config)
         super().__init__(
             knx_module=knx_module,
-            device=_create_notification_instance(knx_module.xknx, config),
+            unique_id=str(self._device.remote_value.group_address),
+            name=config[CONF_NAME],
+            entity_category=config.get(CONF_ENTITY_CATEGORY),
         )
-        self._attr_entity_category = config.get(CONF_ENTITY_CATEGORY)
-        self._attr_unique_id = str(self._device.remote_value.group_address)
 
     async def async_send_message(self, message: str, title: str | None = None) -> None:
         """Send a notification to knx bus."""

homeassistant/components/knx/number.py

@@ -109,16 +109,19 @@ class KnxYamlNumber(_KnxNumber, KnxYamlEntity):
 
     def __init__(self, knx_module: KNXModule, config: ConfigType) -> None:
         """Initialize a KNX number."""
+        self._device = NumericValue(
+            knx_module.xknx,
+            name=config[CONF_NAME],
+            group_address=config[KNX_ADDRESS],
+            group_address_state=config.get(CONF_STATE_ADDRESS),
+            respond_to_read=config[CONF_RESPOND_TO_READ],
+            value_type=config[CONF_TYPE],
+        )
         super().__init__(
             knx_module=knx_module,
-            device=NumericValue(
-                knx_module.xknx,
-                name=config[CONF_NAME],
-                group_address=config[KNX_ADDRESS],
-                group_address_state=config.get(CONF_STATE_ADDRESS),
-                respond_to_read=config[CONF_RESPOND_TO_READ],
-                value_type=config[CONF_TYPE],
-            ),
+            unique_id=str(self._device.sensor_value.group_address),
+            name=config[CONF_NAME],
+            entity_category=config.get(CONF_ENTITY_CATEGORY),
         )
         dpt_string = self._device.sensor_value.dpt_class.dpt_number_str()
         dpt_info = get_supported_dpts()[dpt_string]
@@ -131,7 +134,6 @@ class KnxYamlNumber(_KnxNumber, KnxYamlEntity):
                 dpt_info["sensor_device_class"],
             ),
         )
-        self._attr_entity_category = config.get(CONF_ENTITY_CATEGORY)
         self._attr_mode = config[CONF_MODE]
         self._attr_native_max_value = config.get(
             NumberConf.MAX,
@@ -149,7 +151,6 @@ class KnxYamlNumber(_KnxNumber, KnxYamlEntity):
             CONF_UNIT_OF_MEASUREMENT,
             dpt_info["unit"],
         )
-        self._attr_unique_id = str(self._device.sensor_value.group_address)
 
         self._device.sensor_value.value = max(0, self._attr_native_min_value)
 

homeassistant/components/knx/scene.py

@@ -83,18 +83,19 @@ class KnxYamlScene(_KnxScene, KnxYamlEntity):
 
     def __init__(self, knx_module: KNXModule, config: ConfigType) -> None:
         """Initialize KNX scene."""
+        self._device = XknxScene(
+            xknx=knx_module.xknx,
+            name=config[CONF_NAME],
+            group_address=config[KNX_ADDRESS],
+            scene_number=config[SceneSchema.CONF_SCENE_NUMBER],
+        )
         super().__init__(
             knx_module=knx_module,
-            device=XknxScene(
-                xknx=knx_module.xknx,
-                name=config[CONF_NAME],
-                group_address=config[KNX_ADDRESS],
-                scene_number=config[SceneSchema.CONF_SCENE_NUMBER],
+            unique_id=(
+                f"{self._device.scene_value.group_address}_{self._device.scene_number}"
             ),
-        )
-        self._attr_entity_category = config.get(CONF_ENTITY_CATEGORY)
-        self._attr_unique_id = (
-            f"{self._device.scene_value.group_address}_{self._device.scene_number}"
+            name=config[CONF_NAME],
+            entity_category=config.get(CONF_ENTITY_CATEGORY),
         )
 
 

homeassistant/components/knx/schema.py

@@ -199,16 +199,22 @@ class KNXPlatformSchema(ABC):
         }
 
 
+COMMON_ENTITY_SCHEMA = vol.Schema(
+    {
+        vol.Optional(CONF_NAME, default=""): cv.string,
+        vol.Optional(CONF_ENTITY_CATEGORY): ENTITY_CATEGORIES_SCHEMA,
+    }
+)
+
+
 class BinarySensorSchema(KNXPlatformSchema):
     """Voluptuous schema for KNX binary sensors."""
 
     PLATFORM = Platform.BINARY_SENSOR
-    DEFAULT_NAME = "KNX Binary Sensor"
 
     ENTITY_SCHEMA = vol.All(
-        vol.Schema(
+        COMMON_ENTITY_SCHEMA.extend(
             {
-                vol.Optional(CONF_NAME, default=DEFAULT_NAME): cv.string,
                 vol.Optional(CONF_SYNC_STATE, default=True): sync_state_validator,
                 vol.Optional(CONF_IGNORE_INTERNAL_STATE, default=False): cv.boolean,
                 vol.Optional(CONF_INVERT, default=False): cv.boolean,
@@ -218,7 +224,6 @@ class BinarySensorSchema(KNXPlatformSchema):
                 ),
                 vol.Optional(CONF_DEVICE_CLASS): BINARY_SENSOR_DEVICE_CLASSES_SCHEMA,
                 vol.Optional(CONF_RESET_AFTER): cv.positive_float,
-                vol.Optional(CONF_ENTITY_CATEGORY): ENTITY_CATEGORIES_SCHEMA,
             }
         ),
     )
@@ -230,7 +235,6 @@ class ButtonSchema(KNXPlatformSchema):
     PLATFORM = Platform.BUTTON
 
     CONF_VALUE = "value"
-    DEFAULT_NAME = "KNX Button"
 
     payload_or_value_msg = f"Please use only one of `{CONF_PAYLOAD}` or `{CONF_VALUE}`"
     length_or_type_msg = (
@@ -238,9 +242,8 @@ class ButtonSchema(KNXPlatformSchema):
     )
 
     ENTITY_SCHEMA = vol.All(
-        vol.Schema(
+        COMMON_ENTITY_SCHEMA.extend(
             {
-                vol.Optional(CONF_NAME, default=DEFAULT_NAME): cv.string,
                 vol.Required(KNX_ADDRESS): ga_validator,
                 vol.Exclusive(
                     CONF_PAYLOAD, "payload_or_value", msg=payload_or_value_msg
@@ -254,7 +257,6 @@ class ButtonSchema(KNXPlatformSchema):
                 vol.Exclusive(
                     CONF_TYPE, "length_or_type", msg=length_or_type_msg
                 ): object,
-                vol.Optional(CONF_ENTITY_CATEGORY): ENTITY_CATEGORIES_SCHEMA,
             }
         ),
         vol.Any(
@@ -322,7 +324,6 @@ class ClimateSchema(KNXPlatformSchema):
     CONF_SWING_HORIZONTAL_ADDRESS = "swing_horizontal_address"
     CONF_SWING_HORIZONTAL_STATE_ADDRESS = "swing_horizontal_state_address"
 
-    DEFAULT_NAME = "KNX Climate"
     DEFAULT_SETPOINT_SHIFT_MODE = "DPT6010"
     DEFAULT_SETPOINT_SHIFT_MAX = 6
     DEFAULT_SETPOINT_SHIFT_MIN = -6
@@ -331,9 +332,8 @@ class ClimateSchema(KNXPlatformSchema):
     DEFAULT_FAN_SPEED_MODE = "percent"
 
     ENTITY_SCHEMA = vol.All(
-        vol.Schema(
+        COMMON_ENTITY_SCHEMA.extend(
             {
-                vol.Optional(CONF_NAME, default=DEFAULT_NAME): cv.string,
                 vol.Optional(
                     ClimateConf.SETPOINT_SHIFT_MAX, default=DEFAULT_SETPOINT_SHIFT_MAX
                 ): vol.All(int, vol.Range(min=0, max=32)),
@@ -399,7 +399,6 @@ class ClimateSchema(KNXPlatformSchema):
                 ): vol.Coerce(HVACMode),
                 vol.Optional(ClimateConf.MIN_TEMP): vol.Coerce(float),
                 vol.Optional(ClimateConf.MAX_TEMP): vol.Coerce(float),
-                vol.Optional(CONF_ENTITY_CATEGORY): ENTITY_CATEGORIES_SCHEMA,
                 vol.Optional(CONF_FAN_SPEED_ADDRESS): ga_list_validator,
                 vol.Optional(CONF_FAN_SPEED_STATE_ADDRESS): ga_list_validator,
                 vol.Optional(ClimateConf.FAN_MAX_STEP, default=3): cv.byte,
@@ -433,12 +432,10 @@ class CoverSchema(KNXPlatformSchema):
     CONF_ANGLE_STATE_ADDRESS = "angle_state_address"
 
     DEFAULT_TRAVEL_TIME = 25
-    DEFAULT_NAME = "KNX Cover"
 
     ENTITY_SCHEMA = vol.All(
-        vol.Schema(
+        COMMON_ENTITY_SCHEMA.extend(
             {
-                vol.Optional(CONF_NAME, default=DEFAULT_NAME): cv.string,
                 vol.Optional(CONF_MOVE_LONG_ADDRESS): ga_list_validator,
                 vol.Optional(CONF_MOVE_SHORT_ADDRESS): ga_list_validator,
                 vol.Optional(CONF_STOP_ADDRESS): ga_list_validator,
@@ -456,7 +453,6 @@ class CoverSchema(KNXPlatformSchema):
                 vol.Optional(CoverConf.INVERT_POSITION, default=False): cv.boolean,
                 vol.Optional(CoverConf.INVERT_ANGLE, default=False): cv.boolean,
                 vol.Optional(CONF_DEVICE_CLASS): COVER_DEVICE_CLASSES_SCHEMA,
-                vol.Optional(CONF_ENTITY_CATEGORY): ENTITY_CATEGORIES_SCHEMA,
             }
         ),
         vol.Any(
@@ -481,16 +477,12 @@ class DateSchema(KNXPlatformSchema):
 
     PLATFORM = Platform.DATE
 
-    DEFAULT_NAME = "KNX Date"
-
-    ENTITY_SCHEMA = vol.Schema(
+    ENTITY_SCHEMA = COMMON_ENTITY_SCHEMA.extend(
         {
-            vol.Optional(CONF_NAME, default=DEFAULT_NAME): cv.string,
             vol.Optional(CONF_RESPOND_TO_READ, default=False): cv.boolean,
             vol.Optional(CONF_SYNC_STATE, default=True): sync_state_validator,
             vol.Required(KNX_ADDRESS): ga_list_validator,
             vol.Optional(CONF_STATE_ADDRESS): ga_list_validator,
-            vol.Optional(CONF_ENTITY_CATEGORY): ENTITY_CATEGORIES_SCHEMA,
         }
     )
 
@@ -500,16 +492,12 @@ class DateTimeSchema(KNXPlatformSchema):
 
     PLATFORM = Platform.DATETIME
 
-    DEFAULT_NAME = "KNX DateTime"
-
-    ENTITY_SCHEMA = vol.Schema(
+    ENTITY_SCHEMA = COMMON_ENTITY_SCHEMA.extend(
         {
-            vol.Optional(CONF_NAME, default=DEFAULT_NAME): cv.string,
             vol.Optional(CONF_RESPOND_TO_READ, default=False): cv.boolean,
             vol.Optional(CONF_SYNC_STATE, default=True): sync_state_validator,
             vol.Required(KNX_ADDRESS): ga_list_validator,
             vol.Optional(CONF_STATE_ADDRESS): ga_list_validator,
-            vol.Optional(CONF_ENTITY_CATEGORY): ENTITY_CATEGORIES_SCHEMA,
         }
     )
 
@@ -571,12 +559,9 @@ class FanSchema(KNXPlatformSchema):
     CONF_SWITCH_ADDRESS = "switch_address"
     CONF_SWITCH_STATE_ADDRESS = "switch_state_address"
 
-    DEFAULT_NAME = "KNX Fan"
-
     ENTITY_SCHEMA = vol.All(
-        vol.Schema(
+        COMMON_ENTITY_SCHEMA.extend(
             {
-                vol.Optional(CONF_NAME, default=DEFAULT_NAME): cv.string,
                 vol.Optional(KNX_ADDRESS): ga_list_validator,
                 vol.Optional(CONF_STATE_ADDRESS): ga_list_validator,
                 vol.Optional(CONF_SWITCH_ADDRESS): ga_list_validator,
@@ -584,7 +569,6 @@ class FanSchema(KNXPlatformSchema):
                 vol.Optional(CONF_OSCILLATION_ADDRESS): ga_list_validator,
                 vol.Optional(CONF_OSCILLATION_STATE_ADDRESS): ga_list_validator,
                 vol.Optional(FanConf.MAX_STEP): cv.byte,
-                vol.Optional(CONF_ENTITY_CATEGORY): ENTITY_CATEGORIES_SCHEMA,
                 vol.Optional(CONF_SYNC_STATE, default=True): sync_state_validator,
             }
         ),
@@ -629,7 +613,6 @@ class LightSchema(KNXPlatformSchema):
     CONF_MIN_KELVIN = "min_kelvin"
     CONF_MAX_KELVIN = "max_kelvin"
 
-    DEFAULT_NAME = "KNX Light"
     DEFAULT_COLOR_TEMP_MODE = "absolute"
     DEFAULT_MIN_KELVIN = 2700  # 370 mireds
     DEFAULT_MAX_KELVIN = 6000  # 166 mireds
@@ -661,9 +644,8 @@ class LightSchema(KNXPlatformSchema):
     )
 
     ENTITY_SCHEMA = vol.All(
-        vol.Schema(
+        COMMON_ENTITY_SCHEMA.extend(
             {
-                vol.Optional(CONF_NAME, default=DEFAULT_NAME): cv.string,
                 vol.Optional(KNX_ADDRESS): ga_list_validator,
                 vol.Optional(CONF_STATE_ADDRESS): ga_list_validator,
                 vol.Optional(CONF_BRIGHTNESS_ADDRESS): ga_list_validator,
@@ -713,7 +695,6 @@ class LightSchema(KNXPlatformSchema):
                 vol.Optional(CONF_MAX_KELVIN, default=DEFAULT_MAX_KELVIN): vol.All(
                     vol.Coerce(int), vol.Range(min=1)
                 ),
-                vol.Optional(CONF_ENTITY_CATEGORY): ENTITY_CATEGORIES_SCHEMA,
             }
         ),
         vol.Any(
@@ -759,14 +740,10 @@ class NotifySchema(KNXPlatformSchema):
 
     PLATFORM = Platform.NOTIFY
 
-    DEFAULT_NAME = "KNX Notify"
-
-    ENTITY_SCHEMA = vol.Schema(
+    ENTITY_SCHEMA = COMMON_ENTITY_SCHEMA.extend(
         {
-            vol.Optional(CONF_NAME, default=DEFAULT_NAME): cv.string,
             vol.Optional(CONF_TYPE, default="latin_1"): string_type_validator,
             vol.Required(KNX_ADDRESS): ga_validator,
-            vol.Optional(CONF_ENTITY_CATEGORY): ENTITY_CATEGORIES_SCHEMA,
         }
     )
 
@@ -775,12 +752,10 @@ class NumberSchema(KNXPlatformSchema):
     """Voluptuous schema for KNX numbers."""
 
     PLATFORM = Platform.NUMBER
-    DEFAULT_NAME = "KNX Number"
 
     ENTITY_SCHEMA = vol.All(
-        vol.Schema(
+        COMMON_ENTITY_SCHEMA.extend(
             {
-                vol.Optional(CONF_NAME, default=DEFAULT_NAME): cv.string,
                 vol.Optional(CONF_RESPOND_TO_READ, default=False): cv.boolean,
                 vol.Optional(CONF_MODE, default=NumberMode.AUTO): vol.Coerce(
                     NumberMode
@@ -793,7 +768,6 @@ class NumberSchema(KNXPlatformSchema):
                 vol.Optional(NumberConf.STEP): cv.positive_float,
                 vol.Optional(CONF_DEVICE_CLASS): NUMBER_DEVICE_CLASSES_SCHEMA,
                 vol.Optional(CONF_UNIT_OF_MEASUREMENT): cv.string,
-                vol.Optional(CONF_ENTITY_CATEGORY): ENTITY_CATEGORIES_SCHEMA,
             }
         ),
         _number_limit_sub_validator,
@@ -807,15 +781,12 @@ class SceneSchema(KNXPlatformSchema):
 
     CONF_SCENE_NUMBER = "scene_number"
 
-    DEFAULT_NAME = "KNX SCENE"
-    ENTITY_SCHEMA = vol.Schema(
+    ENTITY_SCHEMA = COMMON_ENTITY_SCHEMA.extend(
         {
-            vol.Optional(CONF_NAME, default=DEFAULT_NAME): cv.string,
             vol.Required(KNX_ADDRESS): ga_list_validator,
             vol.Required(SceneConf.SCENE_NUMBER): vol.All(
                 vol.Coerce(int), vol.Range(min=1, max=64)
             ),
-            vol.Optional(CONF_ENTITY_CATEGORY): ENTITY_CATEGORIES_SCHEMA,
         }
     )
 
@@ -827,12 +798,10 @@ class SelectSchema(KNXPlatformSchema):
 
     CONF_OPTION = "option"
     CONF_OPTIONS = "options"
-    DEFAULT_NAME = "KNX Select"
 
     ENTITY_SCHEMA = vol.All(
-        vol.Schema(
+        COMMON_ENTITY_SCHEMA.extend(
             {
-                vol.Optional(CONF_NAME, default=DEFAULT_NAME): cv.string,
                 vol.Optional(CONF_SYNC_STATE, default=True): sync_state_validator,
                 vol.Optional(CONF_RESPOND_TO_READ, default=False): cv.boolean,
                 vol.Required(CONF_PAYLOAD_LENGTH): vol.All(
@@ -846,7 +815,6 @@ class SelectSchema(KNXPlatformSchema):
                 ],
                 vol.Required(KNX_ADDRESS): ga_list_validator,
                 vol.Optional(CONF_STATE_ADDRESS): ga_list_validator,
-                vol.Optional(CONF_ENTITY_CATEGORY): ENTITY_CATEGORIES_SCHEMA,
             }
         ),
         select_options_sub_validator,
@@ -861,12 +829,10 @@ class SensorSchema(KNXPlatformSchema):
     CONF_ALWAYS_CALLBACK = "always_callback"
     CONF_STATE_ADDRESS = CONF_STATE_ADDRESS
     CONF_SYNC_STATE = CONF_SYNC_STATE
-    DEFAULT_NAME = "KNX Sensor"
 
     ENTITY_SCHEMA = vol.All(
-        vol.Schema(
+        COMMON_ENTITY_SCHEMA.extend(
             {
-                vol.Optional(CONF_NAME, default=DEFAULT_NAME): cv.string,
                 vol.Optional(CONF_SYNC_STATE, default=True): sync_state_validator,
                 vol.Optional(CONF_ALWAYS_CALLBACK, default=False): cv.boolean,
                 vol.Optional(CONF_SENSOR_STATE_CLASS): STATE_CLASSES_SCHEMA,
@@ -874,7 +840,6 @@ class SensorSchema(KNXPlatformSchema):
                 vol.Required(CONF_STATE_ADDRESS): ga_list_validator,
                 vol.Optional(CONF_DEVICE_CLASS): SENSOR_DEVICE_CLASSES_SCHEMA,
                 vol.Optional(CONF_UNIT_OF_MEASUREMENT): cv.string,
-                vol.Optional(CONF_ENTITY_CATEGORY): ENTITY_CATEGORIES_SCHEMA,
             }
         ),
         _sensor_attribute_sub_validator,
@@ -889,16 +854,13 @@ class SwitchSchema(KNXPlatformSchema):
     CONF_INVERT = CONF_INVERT
     CONF_STATE_ADDRESS = CONF_STATE_ADDRESS
 
-    DEFAULT_NAME = "KNX Switch"
-    ENTITY_SCHEMA = vol.Schema(
+    ENTITY_SCHEMA = COMMON_ENTITY_SCHEMA.extend(
         {
-            vol.Optional(CONF_NAME, default=DEFAULT_NAME): cv.string,
             vol.Optional(CONF_INVERT, default=False): cv.boolean,
             vol.Optional(CONF_RESPOND_TO_READ, default=False): cv.boolean,
             vol.Required(KNX_ADDRESS): ga_list_validator,
             vol.Optional(CONF_STATE_ADDRESS): ga_list_validator,
             vol.Optional(CONF_DEVICE_CLASS): SWITCH_DEVICE_CLASSES_SCHEMA,
-            vol.Optional(CONF_ENTITY_CATEGORY): ENTITY_CATEGORIES_SCHEMA,
         }
     )
 
@@ -908,17 +870,13 @@ class TextSchema(KNXPlatformSchema):
 
     PLATFORM = Platform.TEXT
 
-    DEFAULT_NAME = "KNX Text"
-
-    ENTITY_SCHEMA = vol.Schema(
+    ENTITY_SCHEMA = COMMON_ENTITY_SCHEMA.extend(
         {
-            vol.Optional(CONF_NAME, default=DEFAULT_NAME): cv.string,
             vol.Optional(CONF_RESPOND_TO_READ, default=False): cv.boolean,
             vol.Optional(CONF_TYPE, default="latin_1"): string_type_validator,
             vol.Optional(CONF_MODE, default=TextMode.TEXT): vol.Coerce(TextMode),
             vol.Required(KNX_ADDRESS): ga_list_validator,
             vol.Optional(CONF_STATE_ADDRESS): ga_list_validator,
-            vol.Optional(CONF_ENTITY_CATEGORY): ENTITY_CATEGORIES_SCHEMA,
         }
     )
 
@@ -928,16 +886,12 @@ class TimeSchema(KNXPlatformSchema):
 
     PLATFORM = Platform.TIME
 
-    DEFAULT_NAME = "KNX Time"
-
-    ENTITY_SCHEMA = vol.Schema(
+    ENTITY_SCHEMA = COMMON_ENTITY_SCHEMA.extend(
         {
-            vol.Optional(CONF_NAME, default=DEFAULT_NAME): cv.string,
             vol.Optional(CONF_RESPOND_TO_READ, default=False): cv.boolean,
             vol.Optional(CONF_SYNC_STATE, default=True): sync_state_validator,
             vol.Required(KNX_ADDRESS): ga_list_validator,
             vol.Optional(CONF_STATE_ADDRESS): ga_list_validator,
-            vol.Optional(CONF_ENTITY_CATEGORY): ENTITY_CATEGORIES_SCHEMA,
         }
     )
 
@@ -962,27 +916,21 @@ class WeatherSchema(KNXPlatformSchema):
     CONF_KNX_AIR_PRESSURE_ADDRESS = "address_air_pressure"
     CONF_KNX_HUMIDITY_ADDRESS = "address_humidity"
 
-    DEFAULT_NAME = "KNX Weather Station"
-
-    ENTITY_SCHEMA = vol.All(
-        vol.Schema(
-            {
-                vol.Optional(CONF_NAME, default=DEFAULT_NAME): cv.string,
-                vol.Optional(CONF_SYNC_STATE, default=True): sync_state_validator,
-                vol.Required(CONF_KNX_TEMPERATURE_ADDRESS): ga_list_validator,
-                vol.Optional(CONF_KNX_BRIGHTNESS_SOUTH_ADDRESS): ga_list_validator,
-                vol.Optional(CONF_KNX_BRIGHTNESS_EAST_ADDRESS): ga_list_validator,
-                vol.Optional(CONF_KNX_BRIGHTNESS_WEST_ADDRESS): ga_list_validator,
-                vol.Optional(CONF_KNX_BRIGHTNESS_NORTH_ADDRESS): ga_list_validator,
-                vol.Optional(CONF_KNX_WIND_SPEED_ADDRESS): ga_list_validator,
-                vol.Optional(CONF_KNX_WIND_BEARING_ADDRESS): ga_list_validator,
-                vol.Optional(CONF_KNX_RAIN_ALARM_ADDRESS): ga_list_validator,
-                vol.Optional(CONF_KNX_FROST_ALARM_ADDRESS): ga_list_validator,
-                vol.Optional(CONF_KNX_WIND_ALARM_ADDRESS): ga_list_validator,
-                vol.Optional(CONF_KNX_DAY_NIGHT_ADDRESS): ga_list_validator,
-                vol.Optional(CONF_KNX_AIR_PRESSURE_ADDRESS): ga_list_validator,
-                vol.Optional(CONF_KNX_HUMIDITY_ADDRESS): ga_list_validator,
-                vol.Optional(CONF_ENTITY_CATEGORY): ENTITY_CATEGORIES_SCHEMA,
-            }
-        ),
+    ENTITY_SCHEMA = COMMON_ENTITY_SCHEMA.extend(
+        {
+            vol.Optional(CONF_SYNC_STATE, default=True): sync_state_validator,
+            vol.Required(CONF_KNX_TEMPERATURE_ADDRESS): ga_list_validator,
+            vol.Optional(CONF_KNX_BRIGHTNESS_SOUTH_ADDRESS): ga_list_validator,
+            vol.Optional(CONF_KNX_BRIGHTNESS_EAST_ADDRESS): ga_list_validator,
+            vol.Optional(CONF_KNX_BRIGHTNESS_WEST_ADDRESS): ga_list_validator,
+            vol.Optional(CONF_KNX_BRIGHTNESS_NORTH_ADDRESS): ga_list_validator,
+            vol.Optional(CONF_KNX_WIND_SPEED_ADDRESS): ga_list_validator,
+            vol.Optional(CONF_KNX_WIND_BEARING_ADDRESS): ga_list_validator,
+            vol.Optional(CONF_KNX_RAIN_ALARM_ADDRESS): ga_list_validator,
+            vol.Optional(CONF_KNX_FROST_ALARM_ADDRESS): ga_list_validator,
+            vol.Optional(CONF_KNX_WIND_ALARM_ADDRESS): ga_list_validator,
+            vol.Optional(CONF_KNX_DAY_NIGHT_ADDRESS): ga_list_validator,
+            vol.Optional(CONF_KNX_AIR_PRESSURE_ADDRESS): ga_list_validator,
+            vol.Optional(CONF_KNX_HUMIDITY_ADDRESS): ga_list_validator,
+        }
     )

homeassistant/components/knx/select.py

@@ -65,9 +65,12 @@ class KNXSelect(KnxYamlEntity, SelectEntity, RestoreEntity):
 
     def __init__(self, knx_module: KNXModule, config: ConfigType) -> None:
         """Initialize a KNX select."""
+        self._device = _create_raw_value(knx_module.xknx, config)
         super().__init__(
             knx_module=knx_module,
-            device=_create_raw_value(knx_module.xknx, config),
+            unique_id=str(self._device.remote_value.group_address),
+            name=config[CONF_NAME],
+            entity_category=config.get(CONF_ENTITY_CATEGORY),
         )
         self._option_payloads: dict[str, int] = {
             option[SelectSchema.CONF_OPTION]: option[CONF_PAYLOAD]
@@ -75,8 +78,6 @@ class KNXSelect(KnxYamlEntity, SelectEntity, RestoreEntity):
         }
         self._attr_options = list(self._option_payloads)
         self._attr_current_option = None
-        self._attr_entity_category = config.get(CONF_ENTITY_CATEGORY)
-        self._attr_unique_id = str(self._device.remote_value.group_address)
 
     async def async_added_to_hass(self) -> None:
         """Restore last state."""

homeassistant/components/knx/sensor.py

@@ -202,16 +202,19 @@ class KnxYamlSensor(_KnxSensor, KnxYamlEntity):
 
     def __init__(self, knx_module: KNXModule, config: ConfigType) -> None:
         """Initialize of a KNX sensor."""
+        self._device = XknxSensor(
+            knx_module.xknx,
+            name=config[CONF_NAME],
+            group_address_state=config[SensorSchema.CONF_STATE_ADDRESS],
+            sync_state=config[CONF_SYNC_STATE],
+            always_callback=True,
+            value_type=config[CONF_TYPE],
+        )
         super().__init__(
             knx_module=knx_module,
-            device=XknxSensor(
-                knx_module.xknx,
-                name=config[CONF_NAME],
-                group_address_state=config[SensorSchema.CONF_STATE_ADDRESS],
-                sync_state=config[CONF_SYNC_STATE],
-                always_callback=True,
-                value_type=config[CONF_TYPE],
-            ),
+            unique_id=str(self._device.sensor_value.group_address_state),
+            name=config[CONF_NAME],
+            entity_category=config.get(CONF_ENTITY_CATEGORY),
         )
         dpt_string = self._device.sensor_value.dpt_class.dpt_number_str()
         dpt_info = get_supported_dpts()[dpt_string]
@@ -220,7 +223,6 @@ class KnxYamlSensor(_KnxSensor, KnxYamlEntity):
             CONF_DEVICE_CLASS,
             dpt_info["sensor_device_class"],
         )
-        self._attr_entity_category = config.get(CONF_ENTITY_CATEGORY)
         self._attr_extra_state_attributes = {}
         self._attr_force_update = config[SensorSchema.CONF_ALWAYS_CALLBACK]
         self._attr_native_unit_of_measurement = config.get(
@@ -231,7 +233,6 @@ class KnxYamlSensor(_KnxSensor, KnxYamlEntity):
             CONF_STATE_CLASS,
             dpt_info["sensor_state_class"],
         )
-        self._attr_unique_id = str(self._device.sensor_value.group_address_state)
 
 
 class KnxUiSensor(_KnxSensor, KnxUiEntity):

homeassistant/components/knx/switch.py

@@ -107,20 +107,21 @@ class KnxYamlSwitch(_KnxSwitch, KnxYamlEntity):
 
     def __init__(self, knx_module: KNXModule, config: ConfigType) -> None:
         """Initialize of KNX switch."""
+        self._device = XknxSwitch(
+            xknx=knx_module.xknx,
+            name=config[CONF_NAME],
+            group_address=config[KNX_ADDRESS],
+            group_address_state=config.get(SwitchSchema.CONF_STATE_ADDRESS),
+            respond_to_read=config[CONF_RESPOND_TO_READ],
+            invert=config[SwitchSchema.CONF_INVERT],
+        )
         super().__init__(
             knx_module=knx_module,
-            device=XknxSwitch(
-                xknx=knx_module.xknx,
-                name=config[CONF_NAME],
-                group_address=config[KNX_ADDRESS],
-                group_address_state=config.get(SwitchSchema.CONF_STATE_ADDRESS),
-                respond_to_read=config[CONF_RESPOND_TO_READ],
-                invert=config[SwitchSchema.CONF_INVERT],
-            ),
+            unique_id=str(self._device.switch.group_address),
+            name=config[CONF_NAME],
+            entity_category=config.get(CONF_ENTITY_CATEGORY),
         )
-        self._attr_entity_category = config.get(CONF_ENTITY_CATEGORY)
         self._attr_device_class = config.get(CONF_DEVICE_CLASS)
-        self._attr_unique_id = str(self._device.switch.group_address)
 
 
 class KnxUiSwitch(_KnxSwitch, KnxUiEntity):

homeassistant/components/knx/text.py

@@ -112,20 +112,21 @@ class KnxYamlText(_KnxText, KnxYamlEntity):
 
     def __init__(self, knx_module: KNXModule, config: ConfigType) -> None:
         """Initialize a KNX text."""
+        self._device = XknxNotification(
+            knx_module.xknx,
+            name=config[CONF_NAME],
+            group_address=config[KNX_ADDRESS],
+            group_address_state=config.get(CONF_STATE_ADDRESS),
+            respond_to_read=config[CONF_RESPOND_TO_READ],
+            value_type=config[CONF_TYPE],
+        )
         super().__init__(
             knx_module=knx_module,
-            device=XknxNotification(
-                knx_module.xknx,
-                name=config[CONF_NAME],
-                group_address=config[KNX_ADDRESS],
-                group_address_state=config.get(CONF_STATE_ADDRESS),
-                respond_to_read=config[CONF_RESPOND_TO_READ],
-                value_type=config[CONF_TYPE],
-            ),
+            unique_id=str(self._device.remote_value.group_address),
+            name=config[CONF_NAME],
+            entity_category=config.get(CONF_ENTITY_CATEGORY),
         )
         self._attr_mode = config[CONF_MODE]
-        self._attr_entity_category = config.get(CONF_ENTITY_CATEGORY)
-        self._attr_unique_id = str(self._device.remote_value.group_address)
 
 
 class KnxUiText(_KnxText, KnxUiEntity):

homeassistant/components/knx/time.py

@@ -105,20 +105,21 @@ class KnxYamlTime(_KNXTime, KnxYamlEntity):
 
     def __init__(self, knx_module: KNXModule, config: ConfigType) -> None:
         """Initialize a KNX time."""
+        self._device = XknxTimeDevice(
+            knx_module.xknx,
+            name=config[CONF_NAME],
+            localtime=False,
+            group_address=config[KNX_ADDRESS],
+            group_address_state=config.get(CONF_STATE_ADDRESS),
+            respond_to_read=config[CONF_RESPOND_TO_READ],
+            sync_state=config[CONF_SYNC_STATE],
+        )
         super().__init__(
             knx_module=knx_module,
-            device=XknxTimeDevice(
-                knx_module.xknx,
-                name=config[CONF_NAME],
-                localtime=False,
-                group_address=config[KNX_ADDRESS],
-                group_address_state=config.get(CONF_STATE_ADDRESS),
-                respond_to_read=config[CONF_RESPOND_TO_READ],
-                sync_state=config[CONF_SYNC_STATE],
-            ),
+            unique_id=str(self._device.remote_value.group_address),
+            name=config[CONF_NAME],
+            entity_category=config.get(CONF_ENTITY_CATEGORY),
         )
-        self._attr_entity_category = config.get(CONF_ENTITY_CATEGORY)
-        self._attr_unique_id = str(self._device.remote_value.group_address)
 
 
 class KnxUiTime(_KNXTime, KnxUiEntity):

homeassistant/components/knx/weather.py

@@ -85,12 +85,13 @@ class KNXWeather(KnxYamlEntity, WeatherEntity):
 
     def __init__(self, knx_module: KNXModule, config: ConfigType) -> None:
         """Initialize of a KNX sensor."""
+        self._device = _create_weather(knx_module.xknx, config)
         super().__init__(
             knx_module=knx_module,
-            device=_create_weather(knx_module.xknx, config),
+            unique_id=str(self._device._temperature.group_address_state),  # noqa: SLF001
+            name=config[CONF_NAME],
+            entity_category=config.get(CONF_ENTITY_CATEGORY),
         )
-        self._attr_unique_id = str(self._device._temperature.group_address_state)  # noqa: SLF001
-        self._attr_entity_category = config.get(CONF_ENTITY_CATEGORY)
 
     @property
     def native_temperature(self) -> float | None: