Update Packages' Patches

This commit is contained in:
Khoi Hoang
2022-08-10 15:28:49 -04:00
committed by GitHub
parent f420987a47
commit c4251541d8
3 changed files with 491 additions and 0 deletions

View File

@ -0,0 +1,347 @@
/* Copyright (C) 2012 mbed.org, MIT License
*
* Permission is hereby granted, free of charge, to any person obtaining a copy of this software
* and associated documentation files (the "Software"), to deal in the Software without restriction,
* including without limitation the rights to use, copy, modify, merge, publish, distribute,
* sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all copies or
* substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*/
#ifndef LWIPOPTS_H
#define LWIPOPTS_H
// Workaround for Linux timeval
#if defined (TOOLCHAIN_GCC)
#define LWIP_TIMEVAL_PRIVATE 0
#include <sys/time.h>
#endif
#include "nsapi_types.h"
#include "mbed_retarget.h"
// KH fix
#include <mbed_config.h>
/////////////////////////
// Operating System
#define NO_SYS 0
#if !MBED_CONF_LWIP_IPV4_ENABLED && !MBED_CONF_LWIP_IPV6_ENABLED
#error "Either IPv4 or IPv6 must be enabled."
#endif
#define LWIP_IPV4 MBED_CONF_LWIP_IPV4_ENABLED
#define LWIP_IPV6 MBED_CONF_LWIP_IPV6_ENABLED
#define LWIP_PROVIDE_ERRNO 0
// On dual stack configuration how long to wait for both or preferred stack
// addresses before completing bring up.
#if LWIP_IPV4 && LWIP_IPV6
#if MBED_CONF_LWIP_ADDR_TIMEOUT_MODE
#define BOTH_ADDR_TIMEOUT MBED_CONF_LWIP_ADDR_TIMEOUT
#define PREF_ADDR_TIMEOUT 0
#else
#define PREF_ADDR_TIMEOUT MBED_CONF_LWIP_ADDR_TIMEOUT
#define BOTH_ADDR_TIMEOUT 0
#endif
#else
#define PREF_ADDR_TIMEOUT 0
#define BOTH_ADDR_TIMEOUT 0
#endif
#define DHCP_TIMEOUT MBED_CONF_LWIP_DHCP_TIMEOUT
#define LINK_TIMEOUT 60
#define PREF_IPV4 1
#define PREF_IPV6 2
#if MBED_CONF_LWIP_IP_VER_PREF == 6
#define IP_VERSION_PREF PREF_IPV6
#elif MBED_CONF_LWIP_IP_VER_PREF == 4
#define IP_VERSION_PREF PREF_IPV4
#else
#error "Either IPv4 or IPv6 must be preferred."
#endif
#undef LWIP_DEBUG
#if MBED_CONF_LWIP_DEBUG_ENABLED
#define LWIP_DEBUG 1
#endif
#if NO_SYS == 0
#include "cmsis_os2.h"
#define SYS_LIGHTWEIGHT_PROT 1
#define LWIP_RAW MBED_CONF_LWIP_RAW_SOCKET_ENABLED
#define MEMP_NUM_TCPIP_MSG_INPKT MBED_CONF_LWIP_MEMP_NUM_TCPIP_MSG_INPKT
// Thread stacks use 8-byte alignment
#define LWIP_ALIGN_UP(pos, align) ((pos) % (align) ? (pos) + ((align) - (pos) % (align)) : (pos))
#ifdef LWIP_DEBUG
// For LWIP debug, double the stack
#define TCPIP_THREAD_STACKSIZE LWIP_ALIGN_UP(MBED_CONF_LWIP_TCPIP_THREAD_STACKSIZE*2, 8)
#elif MBED_DEBUG
// When debug is enabled on the build increase stack 25 percent
#define TCPIP_THREAD_STACKSIZE LWIP_ALIGN_UP(MBED_CONF_LWIP_TCPIP_THREAD_STACKSIZE + MBED_CONF_LWIP_TCPIP_THREAD_STACKSIZE / 4, 8)
#else
#define TCPIP_THREAD_STACKSIZE LWIP_ALIGN_UP(MBED_CONF_LWIP_TCPIP_THREAD_STACKSIZE, 8)
#endif
// Thread priority (osPriorityNormal by default)
#define TCPIP_THREAD_PRIO (MBED_CONF_LWIP_TCPIP_THREAD_PRIORITY)
#ifdef LWIP_DEBUG
#define DEFAULT_THREAD_STACKSIZE LWIP_ALIGN_UP(MBED_CONF_LWIP_DEFAULT_THREAD_STACKSIZE*2, 8)
#else
#define DEFAULT_THREAD_STACKSIZE LWIP_ALIGN_UP(MBED_CONF_LWIP_DEFAULT_THREAD_STACKSIZE, 8)
#endif
#define MEMP_NUM_SYS_TIMEOUT 16
#define sys_msleep(ms) sys_msleep(ms)
#endif
// 32-bit alignment
#define MEM_ALIGNMENT 4
#define LWIP_RAM_HEAP_POINTER lwip_ram_heap
// Number of simultaneously queued TCP segments.
#define MEMP_NUM_TCP_SEG MBED_CONF_LWIP_MEMP_NUM_TCP_SEG
// TCP Maximum segment size.
#define TCP_MSS MBED_CONF_LWIP_TCP_MSS
// TCP sender buffer space (bytes).
#define TCP_SND_BUF MBED_CONF_LWIP_TCP_SND_BUF
// TCP sender buffer space (bytes).
#define TCP_WND MBED_CONF_LWIP_TCP_WND
#define TCP_MAXRTX MBED_CONF_LWIP_TCP_MAXRTX
#define TCP_SYNMAXRTX MBED_CONF_LWIP_TCP_SYNMAXRTX
// Number of pool pbufs.
// Each requires 684 bytes of RAM (if MSS=536 and PBUF_POOL_BUFSIZE defaulting to be based on MSS)
#define PBUF_POOL_SIZE MBED_CONF_LWIP_PBUF_POOL_SIZE
#ifdef MBED_CONF_LWIP_PBUF_POOL_BUFSIZE
#undef PBUF_POOL_BUFSIZE
#define PBUF_POOL_BUFSIZE LWIP_MEM_ALIGN_SIZE(MBED_CONF_LWIP_PBUF_POOL_BUFSIZE)
#else
#ifndef PBUF_POOL_BUFSIZE
#if LWIP_IPV6
#define PBUF_POOL_BUFSIZE LWIP_MEM_ALIGN_SIZE(TCP_MSS+20+40+PBUF_LINK_ENCAPSULATION_HLEN+PBUF_LINK_HLEN)
#elif LWIP_IPV4
#define PBUF_POOL_BUFSIZE LWIP_MEM_ALIGN_SIZE(TCP_MSS+20+20+PBUF_LINK_ENCAPSULATION_HLEN+PBUF_LINK_HLEN)
#endif
#endif
#endif
#define MEM_SIZE MBED_CONF_LWIP_MEM_SIZE
// One tcp_pcb_listen is needed for each TCP server.
// Each requires 72 bytes of RAM.
#define MEMP_NUM_TCP_PCB_LISTEN MBED_CONF_LWIP_TCP_SERVER_MAX
// One is tcp_pcb needed for each TCPSocket.
// Each requires 196 bytes of RAM.
#define MEMP_NUM_TCP_PCB MBED_CONF_LWIP_TCP_SOCKET_MAX
// One udp_pcb is needed for each UDPSocket.
// Each requires 84 bytes of RAM (total rounded to multiple of 512).
#define MEMP_NUM_UDP_PCB MBED_CONF_LWIP_UDP_SOCKET_MAX
// Number of non-pool pbufs.
// Each requires 92 bytes of RAM.
#define MEMP_NUM_PBUF MBED_CONF_LWIP_NUM_PBUF
// Each netbuf requires 64 bytes of RAM.
#define MEMP_NUM_NETBUF MBED_CONF_LWIP_NUM_NETBUF
// One netconn is needed for each UDPSocket or TCPSocket.
// Each requires 236 bytes of RAM (total rounded to multiple of 512).
#define MEMP_NUM_NETCONN MBED_CONF_LWIP_SOCKET_MAX
#if MBED_CONF_LWIP_TCP_ENABLED
#define LWIP_TCP 1
#define TCP_OVERSIZE 0
#define LWIP_TCP_KEEPALIVE 1
#define TCP_CLOSE_TIMEOUT MBED_CONF_LWIP_TCP_CLOSE_TIMEOUT
#else
#define LWIP_TCP 0
#endif
#define LWIP_DNS 1
// Only DNS address storage is enabled
#define LWIP_FULL_DNS 0
#define LWIP_SOCKET 0
#define SO_REUSE 1
// Support Multicast
#include "stdlib.h"
#define LWIP_IGMP LWIP_IPV4
#define LWIP_RAND() lwip_get_random()
#define LWIP_COMPAT_SOCKETS 0
#define LWIP_POSIX_SOCKETS_IO_NAMES 0
#define LWIP_BROADCAST_PING 1
// Fragmentation on, as per IPv4 default
#define LWIP_IPV6_FRAG LWIP_IPV6
// Queuing, default is "disabled", as per IPv4 default (so actually queues 1)
#define LWIP_ND6_QUEUEING MBED_CONF_ND6_QUEUEING
// Debug Options
#define NETIF_DEBUG LWIP_DBG_OFF
#define PBUF_DEBUG LWIP_DBG_OFF
#define API_LIB_DEBUG LWIP_DBG_OFF
#define API_MSG_DEBUG LWIP_DBG_OFF
#define SOCKETS_DEBUG LWIP_DBG_OFF
#define ICMP_DEBUG LWIP_DBG_OFF
#define IGMP_DEBUG LWIP_DBG_OFF
#define INET_DEBUG LWIP_DBG_OFF
#define IP_DEBUG LWIP_DBG_OFF
#define IP_REASS_DEBUG LWIP_DBG_OFF
#define RAW_DEBUG LWIP_DBG_OFF
#define MEM_DEBUG LWIP_DBG_OFF
#define MEMP_DEBUG LWIP_DBG_OFF
#define SYS_DEBUG LWIP_DBG_OFF
#define TIMERS_DEBUG LWIP_DBG_OFF
#define TCP_DEBUG LWIP_DBG_OFF
#define TCP_INPUT_DEBUG LWIP_DBG_OFF
#define TCP_FR_DEBUG LWIP_DBG_OFF
#define TCP_RTO_DEBUG LWIP_DBG_OFF
#define TCP_CWND_DEBUG LWIP_DBG_OFF
#define TCP_WND_DEBUG LWIP_DBG_OFF
#define TCP_OUTPUT_DEBUG LWIP_DBG_OFF
#define TCP_RST_DEBUG LWIP_DBG_OFF
#define TCP_QLEN_DEBUG LWIP_DBG_OFF
#define UDP_DEBUG LWIP_DBG_OFF
#define TCPIP_DEBUG LWIP_DBG_OFF
#define SLIP_DEBUG LWIP_DBG_OFF
#define DHCP_DEBUG LWIP_DBG_OFF
#define AUTOIP_DEBUG LWIP_DBG_OFF
#define DNS_DEBUG LWIP_DBG_OFF
#define IP6_DEBUG LWIP_DBG_OFF
#define ETHARP_DEBUG LWIP_DBG_OFF
#define UDP_LPC_EMAC LWIP_DBG_OFF
#ifdef LWIP_DEBUG
#define MEMP_OVERFLOW_CHECK 1
#define MEMP_SANITY_CHECK 1
#define LWIP_DBG_TYPES_ON LWIP_DBG_ON
#define LWIP_DBG_MIN_LEVEL LWIP_DBG_LEVEL_ALL
#else
#define LWIP_NOASSERT 1
#define LWIP_STATS 0
#endif
#define TRACE_TO_ASCII_HEX_DUMP 0
#define LWIP_PLATFORM_BYTESWAP 1
#define LWIP_RANDOMIZE_INITIAL_LOCAL_PORTS 1
// Interface type configuration
#if MBED_CONF_LWIP_ETHERNET_ENABLED
#define LWIP_ARP 1
#define LWIP_ETHERNET 1
#define LWIP_DHCP LWIP_IPV4
#else
#define LWIP_ARP 0
#define LWIP_ETHERNET 0
#endif // MBED_CONF_LWIP_ETHERNET_ENABLED
#if MBED_CONF_LWIP_L3IP_ENABLED
#define LWIP_L3IP 1
#else
#define LWIP_L3IP 0
#endif
//Maximum size of network interface name
#define INTERFACE_NAME_MAX_SIZE NSAPI_INTERFACE_NAME_MAX_SIZE
// Note generic macro name used rather than MBED_CONF_LWIP_PPP_ENABLED
// to allow users like PPPCellularInterface to detect that nsapi_ppp.h is available.
// Enable PPP for now either from lwIP PPP configuration (obsolete) or from PPP service configuration
#if MBED_CONF_PPP_ENABLED || MBED_CONF_LWIP_PPP_ENABLED
#define PPP_SUPPORT 1
#if MBED_CONF_PPP_IPV4_ENABLED || MBED_CONF_LWIP_IPV4_ENABLED
#define LWIP 0x11991199
#if (MBED_CONF_NSAPI_DEFAULT_STACK == LWIP) && !MBED_CONF_LWIP_IPV4_ENABLED
#error LWIP: IPv4 PPP enabled but not IPv4
#endif
#undef LWIP
#define PPP_IPV4_SUPPORT 1
#endif
#if MBED_CONF_PPP_IPV6_ENABLED || MBED_CONF_LWIP_IPV6_ENABLED
#define LWIP 0x11991199
#if (MBED_CONF_NSAPI_DEFAULT_STACK == LWIP) && !MBED_CONF_LWIP_IPV6_ENABLED
#error LWIP: IPv6 PPP enabled but not IPv6
#endif
#undef LWIP
#define PPP_IPV6_SUPPORT 1
// Later to be dynamic for use for multiple interfaces
#define LWIP_IPV6_DUP_DETECT_ATTEMPTS 0
#endif
#endif
#define LWIP_NETBUF_RECVINFO MBED_CONF_LWIP_NETBUF_RECVINFO_ENABLED
// Make sure we default these to off, so
// LWIP doesn't default to on
#ifndef LWIP_ARP
#define LWIP_ARP 0
#endif
// Checksum-on-copy disabled due to https://savannah.nongnu.org/bugs/?50914
#define LWIP_CHECKSUM_ON_COPY 0
#define LWIP_NETIF_HOSTNAME 1
#define LWIP_NETIF_STATUS_CALLBACK 1
#define LWIP_NETIF_LINK_CALLBACK 1
#define DNS_TABLE_SIZE 2
#define DNS_MAX_NAME_LENGTH 128
#include "lwip_random.h"
#include "lwip_tcp_isn.h"
#define LWIP_HOOK_TCP_ISN lwip_hook_tcp_isn
#ifdef MBEDTLS_MD5_C
#define LWIP_USE_EXTERNAL_MBEDTLS 1
#else
#define LWIP_USE_EXTERNAL_MBEDTLS 0
#endif
#define LWIP_ND6_RDNSS_MAX_DNS_SERVERS MBED_CONF_LWIP_ND6_RDNSS_MAX_DNS_SERVERS
#endif /* LWIPOPTS_H_ */

View File

@ -0,0 +1,22 @@
#!/usr/bin/env bash
portenta_h7_rules () {
echo ""
echo "# Portenta H7 bootloader mode UDEV rules"
echo ""
cat <<EOF
SUBSYSTEMS=="usb", ATTRS{idVendor}=="2341", ATTRS{idProduct}=="035b", GROUP="plugdev", MODE="0666"
EOF
}
if [ "$EUID" -ne 0 ]
then echo "Please run as root"
exit
fi
portenta_h7_rules > /etc/udev/rules.d/49-portenta_h7.rules
# reload udev rules
echo "Reload rules..."
udevadm trigger
udevadm control --reload-rules

View File

@ -0,0 +1,122 @@
/*
pgmspace.h - Definitions for compatibility with AVR pgmspace macros
Copyright (c) 2015 Arduino LLC
Based on work of Paul Stoffregen on Teensy 3 (http://pjrc.com)
Permission is hereby granted, free of charge, to any person obtaining a copy
of this software and associated documentation files (the "Software"), to deal
in the Software without restriction, including without limitation the rights
to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
copies of the Software, and to permit persons to whom the Software is
furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in
all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
THE SOFTWARE
*/
#ifndef __PGMSPACE_H_
#define __PGMSPACE_H_ 1
#include <inttypes.h>
#define PROGMEM
#define PGM_P const char *
#define PSTR(str) (str)
#define _SFR_BYTE(n) (n)
typedef void prog_void;
typedef char prog_char;
typedef unsigned char prog_uchar;
typedef int8_t prog_int8_t;
typedef uint8_t prog_uint8_t;
typedef int16_t prog_int16_t;
typedef uint16_t prog_uint16_t;
typedef int32_t prog_int32_t;
typedef uint32_t prog_uint32_t;
typedef int64_t prog_int64_t;
typedef uint64_t prog_uint64_t;
typedef const void* int_farptr_t;
typedef const void* uint_farptr_t;
#define memchr_P(s, c, n) memchr((s), (c), (n))
#define memcmp_P(s1, s2, n) memcmp((s1), (s2), (n))
#define memccpy_P(dest, src, c, n) memccpy((dest), (src), (c), (n))
#define memcpy_P(dest, src, n) memcpy((dest), (src), (n))
#define memmem_P(haystack, haystacklen, needle, needlelen) memmem((haystack), (haystacklen), (needle), (needlelen))
#define memrchr_P(s, c, n) memrchr((s), (c), (n))
#define strcat_P(dest, src) strcat((dest), (src))
#define strchr_P(s, c) strchr((s), (c))
#define strchrnul_P(s, c) strchrnul((s), (c))
#define strcmp_P(a, b) strcmp((a), (b))
#define strcpy_P(dest, src) strcpy((dest), (src))
#define strcasecmp_P(s1, s2) strcasecmp((s1), (s2))
#define strcasestr_P(haystack, needle) strcasestr((haystack), (needle))
#define strcspn_P(s, accept) strcspn((s), (accept))
#define strlcat_P(s1, s2, n) strlcat((s1), (s2), (n))
#define strlcpy_P(s1, s2, n) strlcpy((s1), (s2), (n))
#define strlen_P(a) strlen((a))
#define strnlen_P(s, n) strnlen((s), (n))
#define strncmp_P(s1, s2, n) strncmp((s1), (s2), (n))
#define strncasecmp_P(s1, s2, n) strncasecmp((s1), (s2), (n))
#define strncat_P(s1, s2, n) strncat((s1), (s2), (n))
#define strncpy_P(s1, s2, n) strncpy((s1), (s2), (n))
#define strpbrk_P(s, accept) strpbrk((s), (accept))
#define strrchr_P(s, c) strrchr((s), (c))
#define strsep_P(sp, delim) strsep((sp), (delim))
#define strspn_P(s, accept) strspn((s), (accept))
#define strstr_P(a, b) strstr((a), (b))
#define strtok_P(s, delim) strtok((s), (delim))
#define strtok_rP(s, delim, last) strtok((s), (delim), (last))
#define strlen_PF(a) strlen((a))
#define strnlen_PF(src, len) strnlen((src), (len))
#define memcpy_PF(dest, src, len) memcpy((dest), (src), (len))
#define strcpy_PF(dest, src) strcpy((dest), (src))
#define strncpy_PF(dest, src, len) strncpy((dest), (src), (len))
#define strcat_PF(dest, src) strcat((dest), (src))
#define strlcat_PF(dest, src, len) strlcat((dest), (src), (len))
#define strncat_PF(dest, src, len) strncat((dest), (src), (len))
#define strcmp_PF(s1, s2) strcmp((s1), (s2))
#define strncmp_PF(s1, s2, n) strncmp((s1), (s2), (n))
#define strcasecmp_PF(s1, s2) strcasecmp((s1), (s2))
#define strncasecmp_PF(s1, s2, n) strncasecmp((s1), (s2), (n))
#define strstr_PF(s1, s2) strstr((s1), (s2))
#define strlcpy_PF(dest, src, n) strlcpy((dest), (src), (n))
#define memcmp_PF(s1, s2, n) memcmp((s1), (s2), (n))
#define sprintf_P(s, f, ...) sprintf((s), (f), __VA_ARGS__)
#define snprintf_P(s, f, ...) snprintf((s), (f), __VA_ARGS__)
#define pgm_read_byte(addr) (*(const unsigned char *)(addr))
#define pgm_read_word(addr) (*(const unsigned short *)(addr))
#define pgm_read_dword(addr) (*(const unsigned long *)(addr))
#define pgm_read_float(addr) (*(const float *)(addr))
#define pgm_read_ptr(addr) (*(const void **)(addr))
#define pgm_read_byte_near(addr) pgm_read_byte(addr)
#define pgm_read_word_near(addr) pgm_read_word(addr)
#define pgm_read_dword_near(addr) pgm_read_dword(addr)
#define pgm_read_float_near(addr) pgm_read_float(addr)
#define pgm_read_ptr_near(addr) pgm_read_ptr(addr)
#define pgm_read_byte_far(addr) pgm_read_byte(addr)
#define pgm_read_word_far(addr) pgm_read_word(addr)
#define pgm_read_dword_far(addr) pgm_read_dword(addr)
#define pgm_read_float_far(addr) pgm_read_float(addr)
#define pgm_read_ptr_far(addr) pgm_read_ptr(addr)
#define pgm_get_far_address(addr) (&(addr))
#endif