Update native SDK support for espressif platform // Issue #366, #546, #593

examples/espressif/esp8266-native/platformio.ini

@@ -20,3 +20,4 @@
 [env:esp01_8266]
 platform = espressif
 board = esp01
+build_flags = -Wl,-T"eagle.app.v6.ld"

examples/espressif/esp8266-native/src/blinky.c

@@ -0,0 +1,36 @@
+#include "ets_sys.h"
+#include "osapi.h"
+#include "gpio.h"
+#include "os_type.h"
+
+static const int pin = 1;
+static volatile os_timer_t some_timer;
+
+void some_timerfunc(void *arg)
+{
+  //Do blinky stuff
+  if (GPIO_REG_READ(GPIO_OUT_ADDRESS) & (1 << pin))
+  {
+    // set gpio low
+    gpio_output_set(0, (1 << pin), 0, 0);
+  }
+  else
+  {
+    // set gpio high
+    gpio_output_set((1 << pin), 0, 0, 0);
+  }
+}
+
+void ICACHE_FLASH_ATTR user_init()
+{
+  // init gpio sussytem
+  gpio_init();
+
+  // configure UART TXD to be GPIO1, set as output
+  PIN_FUNC_SELECT(PERIPHS_IO_MUX_U0TXD_U, FUNC_GPIO1); 
+  gpio_output_set(0, 0, (1 << pin), 0);
+
+  // setup timer (500ms, repeating)
+  os_timer_setfn(&some_timer, (os_timer_func_t *)some_timerfunc, NULL);
+  os_timer_arm(&some_timer, 1000, 1);
+}

examples/espressif/esp8266-native/src/user_main.c

@@ -1,68 +0,0 @@
-/******************************************************************************
- * Copyright 2013-2014 Espressif Systems (Wuxi)
- *
- * FileName: user_main.c
- *
- * Description: entry file of user application
- *
- * Modification history:
- *     2014/1/1, v1.0 create this file.
-*******************************************************************************/
-#include "ets_sys.h"
-#include "osapi.h"
-
-#include "user_interface.h"
-#include "smartconfig.h"
-
-void ICACHE_FLASH_ATTR
-smartconfig_done(sc_status status, void *pdata)
-{
-    switch(status) {
-        case SC_STATUS_WAIT:
-            os_printf("SC_STATUS_WAIT\n");
-            break;
-        case SC_STATUS_FIND_CHANNEL:
-            os_printf("SC_STATUS_FIND_CHANNEL\n");
-            break;
-        case SC_STATUS_GETTING_SSID_PSWD:
-            os_printf("SC_STATUS_GETTING_SSID_PSWD\n");
-			sc_type *type = pdata;
-            if (*type == SC_TYPE_ESPTOUCH) {
-                os_printf("SC_TYPE:SC_TYPE_ESPTOUCH\n");
-            } else {
-                os_printf("SC_TYPE:SC_TYPE_AIRKISS\n");
-            }
-            break;
-        case SC_STATUS_LINK:
-            os_printf("SC_STATUS_LINK\n");
-            struct station_config *sta_conf = pdata;
-	
-	        wifi_station_set_config(sta_conf);
-	        wifi_station_disconnect();
-	        wifi_station_connect();
-            break;
-        case SC_STATUS_LINK_OVER:
-            os_printf("SC_STATUS_LINK_OVER\n");
-            if (pdata != NULL) {
-                uint8 phone_ip[4] = {0};
-
-                os_memcpy(phone_ip, (uint8*)pdata, 4);
-                os_printf("Phone ip: %d.%d.%d.%d\n",phone_ip[0],phone_ip[1],phone_ip[2],phone_ip[3]);
-            }
-            smartconfig_stop();
-            break;
-    }
-	
-}
-
-void user_rf_pre_init(void)
-{
-}
-
-void user_init(void)
-{
-    os_printf("SDK version:%s\n", system_get_sdk_version());
-	
-    wifi_set_opmode(STATION_MODE);
-    smartconfig_start(smartconfig_done);
-}

platformio/builder/scripts/espressif.py

@@ -254,16 +254,21 @@ else:
             join("$PIOPACKAGES_DIR", "sdk-esp8266", "include"),
             "$PROJECTSRC_DIR"
         ],
-        LIBPATH=[join("$PIOPACKAGES_DIR", "sdk-esp8266", "lib")],
+
+        LIBPATH=[
+            join("$PIOPACKAGES_DIR", "sdk-esp8266", "lib"),
+            join("$PIOPACKAGES_DIR", "sdk-esp8266", "ld")
+        ],
+
         BUILDERS=dict(
             ElfToBin=Builder(
                 action=" ".join([
                     '"$OBJCOPY"',
                     "-eo", "$SOURCES",
                     "-bo", "${TARGETS[0]}",
-                    "-bm", "qio",
-                    "-bf", "40",
-                    "-bz", "512K",
+                    "-bm", "$BOARD_FLASH_MODE",
+                    "-bf", "${__get_board_f_flash(__env__)}",
+                    "-bz", "${__get_flash_size(__env__)}",
                     "-bs", ".text",
                     "-bs", ".data",
                     "-bs", ".rodata",
@@ -277,20 +282,24 @@ else:
         )
     )
     env.Replace(
-        LDSCRIPT_PATH=join(
-            "$PIOPACKAGES_DIR", "sdk-esp8266", "ld", "eagle.app.v6.ld"),
-        LIBS=["c", "gcc", "phy", "pp", "net80211", "lwip", "wpa", "main",
-              "json", "upgrade", "smartconfig", "pwm", "at", "ssl"],
+        LIBS=[
+            "c", "gcc", "phy", "pp", "net80211", "lwip", "wpa", "wpa2",
+            "main", "wps", "crypto", "json", "ssl", "pwm", "upgrade",
+            "smartconfig", "airkiss", "at"
+        ],
+
         UPLOADERFLAGS=[
             "-vv",
-            "-cd", "ck",
+            "-cd", "$UPLOAD_RESETMETHOD",
             "-cb", "$UPLOAD_SPEED",
             "-cp", "$UPLOAD_PORT",
             "-ca", "0x00000",
             "-cf", "${SOURCES[0]}",
             "-ca", "0x40000",
             "-cf", "${SOURCES[1]}"
-        ]
+        ],
+
+        UPLOADCMD='"$UPLOADER" $UPLOADERFLAGS',
     )
 
 #