wolfSSL/wolfssl
1
0
Fork 1
mirror of https://github.com/wolfSSL/wolfssl.git synced 2025-07-29 18:27:29 +02:00
Code Issues Packages Projects Releases Wiki Activity

Merge pull request #8241 from LinuxJedi/STM32MP13-Cube

Browse Source 
Add STM32MP13 to Cube IDE
This commit is contained in:
David Garske
2024-11-29 08:37:02 -08:00
committed by GitHub
parent 9bec6da2ff fbdb34a6e0
commit ade917a977
2 changed files with 15 additions and 3 deletions
Download Patch File Download Diff File Expand all files Collapse all files

6
IDE/STM32Cube/README.md
View File

@ -37,6 +37,9 @@ You need both the STM32 IDE and the STM32 initialization code generator (STM32Cu
8. The Benchmark example uses float. To enable go to "Project Properties" -> "C/C++ Build" -> "Settings" -> "Tool Settings" -> "MCU Settings" -> Check "Use float with printf".
9. To enable printf make the `main.c` changes below in the [STM32 Printf](#stm32-printf) section.
**Note:** The STM32MP13 will likely require you to use DDR RAM, as well as enabling MMU and caches for optimum performance. Please see the `STM32MP13.md` file in `wolfcrypt/src/port/st` for more information on how to do this.
### Creating your own STM32CubeMX configuration
If none of the examples fit your STM32 type then you can create your own in STM32CubeMX by doing the following:
@ -90,10 +93,11 @@ The section for "Hardware platform" may need to be adjusted depending on your pr
* To enable STM32WL support define `WOLFSSL_STM32WL`.
* To enable STM32U5 support define `WOLFSSL_STM32U5`.
* To enable STM32H5 support define `WOLFSSL_STM32H5`.
* To enable STM32MP13 support define `WOLFSSL_STM32MP13`.
To use the STM32 Cube HAL support make sure `WOLFSSL_STM32_CUBEMX` is defined.
The PKA acceleration for ECC is available on some U5, L5 and WB55 chips.
The PKA acceleration for ECC is available on some U5, L5, WB55 and MP13 chips.
This is enabled with `WOLFSSL_STM32_PKA`. You can see some of the benchmarks [here](STM32_Benchmarks.md).
To disable hardware crypto acceleration you can define:

12
IDE/STM32Cube/default_conf.ftl
View File

@ -165,14 +165,22 @@ extern ${variable.value} ${variable.name};
#define HAL_CONSOLE_UART huart3
#define STM32_HAL_V2
#undef NO_STM32_HASH
#elif defined(STM32MP135Fxx)
#define WOLFSSL_STM32MP13
#define HAL_CONSOLE_UART huart4
#define STM32_HAL_V2
#undef NO_STM32_HASH
#undef NO_STM32_CRYPTO
#define WOLFSSL_STM32_PKA
#define WOLFSSL_STM32_PKA_V2
#else
#warning Please define a hardware platform!
/* This means there is not a pre-defined platform for your board/CPU */
/* You need to define a CPU type, HW crypto and debug UART */
/* CPU Type: WOLFSSL_STM32F1, WOLFSSL_STM32F2, WOLFSSL_STM32F4,
WOLFSSL_STM32F7, WOLFSSL_STM32H7, WOLFSSL_STM32L4, WOLFSSL_STM32L5,
WOLFSSL_STM32G0, WOLFSSL_STM32G4, WOLFSSL_STM32WB and WOLFSSL_STM32U5 */
WOLFSSL_STM32G0, WOLFSSL_STM32G4, WOLFSSL_STM32WB, WOLFSSL_STM32U5 and
WOLFSSL_STM32MP13 */
#define WOLFSSL_STM32F4
/* Debug UART used for printf */