README_en

IDE/Renesas/cs+/Projects/t4_demo/README_en.txt

@@ -0,0 +1,83 @@
+wolfSSL/AlphaProject Boad demo setup Guide
+
+This demo is tested with Renesas CS+ v6.01<EFBFBD>AAP-RX71M-0A, wolfSSL 3.15.3.
+
+Setup process:
+1. Download software
+  - Unzip AlphaProject firmware
+  - Unzip wolfssl under the same directory
+ 
+2. Set up wolfSSL
+  - open wolfssl\IDE\Renesas\cs+\Projec/wolfssl\lib.mtpj with CS+ and build
+  - open t4_demo.mtpj and build. This create demo program library.
+
+3. Set up AlphaProject
+  - The demo uses ap_rx71m_0a_sample_cs\Sample\ap_rx71m_0a_ether_sample_cs\
+        ap_rx71m_0a_ether_sample_cs.mtpj
+  - Open and edit ap_rx71m_0a_sample_cs\Sample\ap_rx71m_0a_ether_sample_cs\src\AP_RX71M_0A.c
+    insert  wolfSSL_init() in echo_srv_init().
+
+===
+	sci_init();
+	can_init();
+	echo_srv_init();
+	wolfSSL_init(); <- insert this line
+===
+
+  - Modify stack and heap size in ap_rx71m_0a_sample_cs\Sample\ap_rx71m_0a_ether_sample_cs\src\r_config
+  Line 120#pragma stacksize su=0x2000
+  Line 139 #define BSP_CFG_HEAP_BYTES  (0xa000)
+
+<EFBFBD>@- Modify IP address ib Sample\ap_rx71m_0a_ether_sample_cs\src\r_t4_rx\src\config_tcpudp.c
+<EFBFBD>@as needed
+<EFBFBD>@
+===
+#define MY_IP_ADDR0     192,168,1,200           /* Local IP address  */
+#define GATEWAY_ADDR0   192,168,1,254           /* Gateway address (invalid if all 0s) */
+#define SUBNET_MASK0    255,255,255,0
+===
+
+    - Add project properties of linking library in ap_rx71m_0a_ether_sample_cs.mtpj
+    
+wolfssl\IDE\Renesas\cs+\Projects\wolfssl_lib\DefaultBuild\wolfssl_lib.lib
+wolfssl\IDE\Renesas\cs+\Projects\t4_demo\DefaultBuild\t4_demo.lib
+
+   - Build the project and start execut. You see message on the console prompting command.
+   
+===
+wolfSSL Demo
+t: test, b: benchmark, s: server, or c <IP addr> <Port>: client
+$
+===
+
+Command can be executed only once. You need to reset and restart MPU for following command.
+
+Command instruction:
+t: Crypt algorithm test
+b: benchmark
+s: simple server acceptint at port 50000
+c: simple client. Specify IP address and port as following.
+   c <IP Addr> <Port Num>
+   
+
+4. Testing TLS Connection
+   You can use wolfssl/examples/server and client on your PC for TLS peer test.
+   
+   
+PC side<64>F
+$ ./examples/server/server -b -d
+
+Board side<64>F
+> c <IP Addr> 11111
+
+Board side<64>F
+> s
+
+PC side<64>F
+$ ./examples/client/client -h <IP Addr> -p 50000
+
+---
+If you have any question, please contact support@wolfssl.com.
+
+wolfSSL Inc.
+

IDE/Renesas/cs+/Projects/t4_demo/README_jp.txt

@@ -9,7 +9,7 @@ wolfSSL/AlphaProject
 <EFBFBD>@- <20><><EFBFBD><EFBFBD><EFBFBD>t<EFBFBD>H<EFBFBD><48><EFBFBD>_<EFBFBD>[<5B><><EFBFBD><EFBFBD>wolfssl<73>ꎮ<EFBFBD><EA8EAE><EFBFBD>𓀂<EFBFBD><F0938082>܂<EFBFBD><DC82>B
 
 <EFBFBD>Q<EFBFBD>DwolfSSL<EFBFBD>̃Z<EFBFBD>b<EFBFBD>g<EFBFBD>A<EFBFBD>b<EFBFBD>v
-<EFBFBD>@- CS*<EFBFBD>ɂ<EFBFBD>wolfssl\IDE\Renesas\cs+\Project<63><74><EFBFBD><EFBFBD>wolfssl\lib.mtpj<70><6A><EFBFBD>J<EFBFBD><4A>
+<EFBFBD>@- CS+<EFBFBD>ɂ<EFBFBD>wolfssl\IDE\Renesas\cs+\Project<63><74><EFBFBD><EFBFBD>wolfssl\lib.mtpj<70><6A><EFBFBD>J<EFBFBD><4A>
 <EFBFBD>@<40>@wolfSSL<53><4C><EFBFBD>C<EFBFBD>u<EFBFBD><75><EFBFBD><EFBFBD><EFBFBD>[<5B>̃r<CC83><72><EFBFBD>h<EFBFBD><68><EFBFBD><EFBFBD><EFBFBD>܂<EFBFBD><DC82>B
 <EFBFBD>@- <20><><EFBFBD><EFBFBD><EFBFBD>t<EFBFBD>H<EFBFBD><48><EFBFBD>_<EFBFBD>̉<EFBFBD><CC89><EFBFBD>t4_demo.mtpj<70><6A><EFBFBD>J<EFBFBD><4A><EFBFBD>A<EFBFBD>f<EFBFBD><66><EFBFBD>v<EFBFBD><76><EFBFBD>O<EFBFBD><4F><EFBFBD><EFBFBD><EFBFBD>̃r<CC83><72><EFBFBD>h<EFBFBD><68><EFBFBD><EFBFBD><EFBFBD>܂<EFBFBD><DC82>B
 <EFBFBD>@<40><><EFBFBD>̃v<CC83><76><EFBFBD>O<EFBFBD><4F><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>C<EFBFBD>u<EFBFBD><75><EFBFBD><EFBFBD><EFBFBD>[<5B>`<60><><EFBFBD>Ńr<C583><72><EFBFBD>h<EFBFBD><68><EFBFBD><EFBFBD><EFBFBD>܂<EFBFBD><DC82>B