Bodmer/TFT_eSPI
1
0
Fork 1
mirror of https://github.com/Bodmer/TFT_eSPI.git synced 2025-08-01 03:34:43 +02:00
Code Issues Packages Projects Releases Wiki Activity

Added LilyGo T-QT Support (#2602)

Browse Source 
Co-authored-by: lewishe <lewishe@outlook.com>
This commit is contained in:
Bodmer
2023-04-23 17:28:44 +01:00
committed by GitHub
parent e80f4d01c6
commit c0190fcdae
3 changed files with 74 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

28
TFT_Drivers/GC9A01_Rotation.h
View File

@@ -9,20 +9,48 @@
writedata(TFT_MAD_BGR);
_width = _init_width;
_height = _init_height;
#ifdef CGRAM_OFFSET
if (_init_width == 128)
{
colstart = 2;
rowstart = 1;
}
#endif
break;
case 1: // Landscape (Portrait + 90)
writedata(TFT_MAD_MX | TFT_MAD_MV | TFT_MAD_BGR);
_width = _init_height;
_height = _init_width;
#ifdef CGRAM_OFFSET
if (_init_width == 128)
{
colstart = 1;
rowstart = 2;
}
#endif
break;
case 2: // Inverter portrait
writedata(TFT_MAD_MX | TFT_MAD_MY | TFT_MAD_BGR);
_width = _init_width;
_height = _init_height;
#ifdef CGRAM_OFFSET
if (_init_width == 128)
{
colstart = 2;
rowstart = 1;
}
#endif
break;
case 3: // Inverted landscape
writedata(TFT_MAD_MV | TFT_MAD_MY | TFT_MAD_BGR);
_width = _init_height;
_height = _init_width;
#ifdef CGRAM_OFFSET
if (_init_width == 128)
{
colstart = 1;
rowstart = 2;
}
#endif
break;
}

1
User_Setup_Select.h
View File

@@ -137,6 +137,7 @@
//#include <User_Setups/Setup209_LilyGo_T_Dongle_S3.h> // For the LilyGo T-Dongle S3 based ESP32 with ST7735 80 x 160 TFT
// #include <User_Setups/Setup210_LilyGo_T_Embed_S3.h> // For the LilyGo T-Embed S3 based ESP32S3 with ST7789 170 x 320 TFT
// #include <User_Setups/Setup211_LilyGo_T_QT_Pro_S3.h> // For the LilyGo T-QT Pro S3 based ESP32S3 with GC9A01 128 x 128 TFT
//#include <User_Setups/Setup301_BW16_ST7735.h> // Setup file for Bw16-based boards with ST7735 160 x 80 TFT

45
User_Setups/Setup211_LilyGo_T_QT_Pro_S3.h Normal file
View File

@@ -0,0 +1,45 @@
// GC9A01 128 x 128 display with no chip select line
#define USER_SETUP_ID 211
#define GC9A01_DRIVER // Configure all registers
#define TFT_WIDTH 128
#define TFT_HEIGHT 128
// #define TFT_RGB_ORDER TFT_RGB // Colour order Red-Green-Blue
//#define TFT_RGB_ORDER TFT_BGR // Colour order Blue-Green-Red
// #define TFT_INVERSION_ON
//#define TFT_INVERSION_OFF
#define TFT_BACKLIGHT_ON 0
#define CGRAM_OFFSET
#define TFT_BL 10 // LED back-light
#define TFT_MISO -1 // Not connected
#define TFT_MOSI 2
#define TFT_SCLK 3
#define TFT_CS 5
#define TFT_DC 6
#define TFT_RST 1 // Connect reset to ensure display initialises
#define LOAD_GLCD // Font 1. Original Adafruit 8 pixel font needs ~1820 bytes in FLASH
#define LOAD_FONT2 // Font 2. Small 16 pixel high font, needs ~3534 bytes in FLASH, 96 characters
#define LOAD_FONT4 // Font 4. Medium 26 pixel high font, needs ~5848 bytes in FLASH, 96 characters
#define LOAD_FONT6 // Font 6. Large 48 pixel font, needs ~2666 bytes in FLASH, only characters 1234567890:-.apm
#define LOAD_FONT7 // Font 7. 7 segment 48 pixel font, needs ~2438 bytes in FLASH, only characters 1234567890:.
#define LOAD_FONT8 // Font 8. Large 75 pixel font needs ~3256 bytes in FLASH, only characters 1234567890:-.
//#define LOAD_FONT8N // Font 8. Alternative to Font 8 above, slightly narrower, so 3 digits fit a 160 pixel TFT
#define LOAD_GFXFF // FreeFonts. Include access to the 48 Adafruit_GFX free fonts FF1 to FF48 and custom fonts
#define SMOOTH_FONT
// #define SPI_FREQUENCY 27000000
#define SPI_FREQUENCY 40000000
#define SPI_READ_FREQUENCY 20000000
#define SPI_TOUCH_FREQUENCY 2500000
// #define SUPPORT_TRANSACTIONS