EFeru/hoverboard-firmware-hack-FOC
1
0
Fork 1
mirror of https://github.com/EFeru/hoverboard-firmware-hack-FOC.git synced 2025-08-04 18:14:28 +02:00
Code Issues Packages Projects Releases Wiki Activity

Created Variant SKATEBOARD (markdown)

Candas1
2021-04-10 13:38:22 +02:00
parent 3c7e56f2a6
commit 43d2f1a378
1 changed files with 16 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

16
Variant-SKATEBOARD.md Normal file

@@ -0,0 +1,16 @@
This variant can be used with Pulse Width Modulation remotes for Skateboards/Longboards.<br>
Those remotes use a single PWM Channel for Throttle and Brake.<br>
When the remote is at middle/resting position, the motors are freewheeling (Torque Mode).
## Wiring:
* Connect the receiver signal to green wire on right sensor cable(shorter)
⚠ Red wire from sensor cable delivers 15v !!!
Use 3.3v from programming port, 5v from hall sensor cable, or a voltage regulator.
## Calibration:
Proceed with [calibration](https://github.com/EmanuelFeru/hoverboard-firmware-hack-FOC/wiki/Calibration) for better control.
## Troubleshooting:
If the board is beeping:
* Make sure you are using the sensor cable(left or right) selected in config.h