EFeru/hoverboard-firmware-hack-FOC
1
0
Fork 1
mirror of https://github.com/EFeru/hoverboard-firmware-hack-FOC.git synced 2025-08-05 18:44:28 +02:00
Code Issues Packages Projects Releases Wiki Activity

Updated Battery (markdown)

Candas1
2022-05-11 09:02:15 +02:00
parent 98b1e1b889
commit aa9c335174
1 changed files with 6 additions and 1 deletions
Download Patch File Download Diff File Expand all files Collapse all files

7
Battery.md

@@ -16,7 +16,9 @@ You can adjust the levels to your needs in [config.h](https://github.com/Emanuel
|LVL3|3.7v|Yellow blink|||BAT_LVL3|
|LVL2|3.6v|Red|Slow beeps|BAT_LVL2_ENABLE|BAT_LVL2|
|LVL1|3.5v|Red Blink|Fast beeps|BAT_LVL1_ENABLE|BAT_LVL1|
|DEAD|3.37v||Power Off|||
|DEAD|3.37v||Power Off|BAT_DEAD_ENABLE||
BAT_LVL1_ENABLE and BAT_DEAD_ENABLE are enabled by default, you can disable it by making it 0 in the config.h file.
## :zzz: Inactivity timeout - Power Saving
The board will automatically power off after approximatively 8 minutes of inactivity by default.<br>
@@ -40,6 +42,9 @@ If the board is [beeping](https://github.com/EmanuelFeru/hoverboard-firmware-hac
* You can limit the [current](https://github.com/EFeru/hoverboard-firmware-hack-FOC/wiki/Setup-current-and-speed-limits#current-limit) being drawn to reduce the voltage drop but you will also reduce the power
* [Debug Serial](https://github.com/EFeru/hoverboard-firmware-hack-FOC/wiki/Debug-Serial) can be used to monitor battery voltage
You can turn off the battery dead power off with BAT_DEAD_ENABLE parameter for debugging.<br>
<br>
If the board turns off without the melody, the BMS is shutting the power off
* You are drawing too much current which triggers the over-discharge protection of your BMW. You can limit the [current](https://github.com/EFeru/hoverboard-firmware-hack-FOC/wiki/Setup-current-and-speed-limits#current-limit) but you will reduce the power
* It can happen if your battery is fully charged and too much current is flowing back (regenerative braking), it can trigger overcharge protection of your BMS