Summary
Updated documentation describing the usage of Arduino-esp32 core as ESP-IDF component.
Impact
Removed confusing mentions of advanced menuconfig options.
Extended process of installation, setup, and usage.
Related links
Closes#5833
Summary
The M5Core2 and the very similar M5Tough have 40 digital pins
See reference here: https://docs.m5stack.com/en/core/core2 as well as the constant declarations in the bottom part of the file.
Impact
Without this, Code that needs the total number of pins (e.g. firmata) doesn't show the higher pin numbers correctly.
* fixes setPins and begin to keep rx/tx unmodified
* adds Hardware Flow Control mode and CTS/RTS pin setting
* adds Hardware Flow Control mode and CTS/RTS pin setting
* adds Hardware Flow Control mode and CTS/RTS pin setting
* adds Hardware Flow Control mode and CTS/RTS pin setting
* Code Review
* Added the Tools Options into the docs.
* Added more options
* Deleted wrong file.
* [Docs] Added image to show the MSC and some grammar fixes
* [Docs] Added more information about the core selection
* Deleted wrong file.
* [Docs] Added more information about the core selection
* [Docs] Changes according to the PR review
* GPIO refactoring
GPIO now using ESP-IDF API on all chips.
LEDC interrupt fix removed - no longer needed.
Edited pins_arduino.h in variants according to changes in gpio.
* Edited analog channels functions
* Added dual antenna for WiFi (based on the ESP32-WROOM-DA module)
* Fixed build error
* Fixed indentation and renamed function to setDualAntennaConfig
* Added the RX and TX selection modes as configuration
* Mode code optimization
Summary
Touch Sensor refactoring to be based on IDF 4.4.
Adds support to ESP32S2 and future ESP32S3.
Adds some new APIs:
For all chips:
void touchAttachInterruptArg(uint8_t pin, void (*userFunc)(void*), void *arg, uint32_t threshold);
This function allows the user to add and pass a void* parameter to the ISR user callback.
void touchDetachInterrupt(uint8_t pin);
This function detaches ISR call back for the touch pad pin.
Only ESP32 chip
void touchInterruptSetThresholdDirection(bool mustbeLower);
This function allows the user to set if the ISR callback will be activated when the touch sensor readings are lower or higher than the threshold defined. See example TouchButton.ino.
Only ESP32-S2 and ESP32-S3 chips
bool touchInterruptGetLastStatus(uint8_t pin);
This function reports if the touch pad pin is touched or untouched. It can be used with ISR to identify when it is touched and untouched (released). See example TouchButtonV2.ino.
Impact
None. ll original APIs and examples now run on ESP32 and ESP32-S2.
Related links
Fix#6095Fix#6034Fix#5799Fix#5745Fix#5527Fix#5493Fix#4321Fix#4044Fix#2722Fix#2625
* Unneccesary Operation Removed
(A) extra operation not needed and incorrect:
wrong by 0.5 but happens to be thrown out
( delta * dividend + (divisor / 2) ) / divisor
delta * dividend divisor
= ---------------- + -----------
divisor 2 * divisor
= delta * dividend / divisor + 1/2
(B) check first before doing other computations
(C) changed to rise/run, easier for future maintainer
since it's closer to equation of a line
(D) before: mult, shift, add, div, add
now: mult, div, add
(E) error message easier to trace where thrown
* Update WMath.cpp
forgot to change variable name
* Docs cleanup and version updated to 2.0.2
* Removed issue template information
* Removed issue template file
* Added referecnces for the issue and feature request form
CaptivePortal.ino example did randomly crash for me ... so I start investigate ;-)
Decoding stack results
0x4016faea: WiFiUDP::write(unsigned char const*, unsigned int) at C:\Users\knoeb\AppData\Local\Arduino15\packages\esp32\hardware\esp32\1.0.5\libraries\WiFi\src\WiFiUdp.cpp line 201
0x400d4a4a: DNSServer::replyWithIP() at C:\Users\knoeb\AppData\Local\Temp\arduino_build_486825\sketch\src\DNSServer\DNSServer.cpp line 187
0x400d4d01: DNSServer::processNextRequest() at C:\Users\knoeb\AppData\Local\Temp\arduino_build_486825\sketch\src\DNSServer\DNSServer.cpp line 117
0x400d3e81: loop() at D:\Drive\Dokumente\HTL_Lehrer\2021_22\Projekte\Stromzaehler_Patrick\arduino/arduino.ino line 1078
0x400dd545: loopTask(void*) at C:\Users\knoeb\AppData\Local\Arduino15\packages\esp32\hardware\esp32\1.0.5\cores\esp32\main.cpp line 37
0x4008a0de: vPortTaskWrapper at /home/runner/work/esp32-arduino-lib-builder/esp32-arduino-lib-builder/esp-idf/components/freertos/port.c line 143
I found with wireshark a possibility to trigger the crash on demand is:
nslookup 3.1o1osr0092ons87rp375p1pq8q066o8p56or1sqsps6rs17r4384q9748qr1r52.699p1r741q737393648s29917o45p16q50rn517rnsp73pp68p1q259s92693qp.s607408539s0p06p7559os0899866344r7qq7rpns960o9576q65.r5n94r5so9784pq1.i.03.s.sophosxl.net
The problem was that QNameLength is a signed byte and therefore its not possible to count up to 255. Additionally we need 256 bytes for the QName string to accommodate for the zero termination.
The reason behind this refactoring is that all of the sketch related functions can (and will) be used for other purposes.
Build in the sketch directory: This will make it easy to handle artifacts after the build.
Separate sketch related functions from IDE installation script. This is the main commit.
Create a separate job for the Cmake check. This check was part of one of the Linux build. I believe that it's not the best place for such a check.
Checking for the skip landmarks and validity of the the sketch directory were already done by count_sketches.
With LittleFS the `fs.exists(path)` returns true also on folders. A `isDirectory()` call is required to set _isFile to false on directories.
This enables serving all files from a folder like : `server->serveStatic("/", LittleFS, "/", cacheHeader.c_str());
File f = fs.open(path);
_isFile = (f && (! f.isDirectory()));
