This commit removes the usage of all legacy FreeRTOS data types that
are exposed via configENABLE_BACKWARD_COMPATIBILITY. Legacy types can
still be used by enabling CONFIG_FREERTOS_ENABLE_BACKWARD_COMPATIBILITY.
* Original commit: espressif/esp-idf@57fd78f5ba
Initial version of freemodbus master port files have been added to ESP-IDF based on https://github.com/armink/FreeModbus_Slave-Master-RTT-STM32.
The overall repository license, at the time of adding these files, has been BSD 3-clause. However at that time, several port files carried LGPL license headers. As the author of these files confirmed in https://github.com/armink/FreeModbus_Slave-Master-RTT-STM32/issues/61#issuecomment-977828450, this wasn't intentional. ESP-IDF version of modbus master port has been rewritten to target FreeRTOS instead of RT-Thread, but the license headers remained from the original version. This commit corrects this, replacing the license of these files with BSD 3-clause.
* Original commit: espressif/esp-idf@b8c1d26f56
fixes the issue with uart_wait_tx_done() when the task is suspended and transmission is done right before reenable tx_done interrupt
* Original commit: espressif/esp-idf@c801b3a182
Current lwip implementation does not support deleting a task which is
actively waiting on `select()` or `poll()` API.
Therefore we have to make sure that `select()` exits to deallocate its internal
callback before deleting the task. This is achieved by a shutdown
semaphore which informs the client once the `select()` exitted.
fix slave
* Original commit: espressif/esp-idf@898cac0061
Enables building C3 examples in CI.
Fixes related warnings/errors and disables examples that cannot run.
* Original commit: espressif/esp-idf@04df1f3a42
add multi register area descriptors into concrete port (initial)
add create/destroy of area descriptors into concrete port
add the list of descriptors in common slave interface structure and init/destroy in concrete slave port
move r/w callback functions into common slave
final update of common slave interface wrappers add override API option in concrete port
update slave examples to check new feature
* Original commit: espressif/esp-idf@96b77a28b1
Apply the pre-commit hook whitespace fixes to all files in the repo.
(Line endings, blank lines at end of file, trailing whitespace)
* Original commit: espressif/esp-idf@66fb5a29bb
Running with a newer doxygen version than what's
used in CI may raise warnings locally that are not
present when built by CI
* Original commit: espressif/esp-idf@9b552ce004
Add TCP port files to provide Modbus TCP interface for communication
Add freemodbus add tcp support for common master/slave iface and tcp example based on socket API
The communication between master and slave checked for each example serial_master, serial_slave (use ModbusPoll TCP)
update tcp example according netif changes, fix ci issues
update TCP slave implementation
update example_test.py to to set IP through stdin
update API documentation
event bit instead of semahore to lock communication resource
update default options and master/slave port files
Closes https://github.com/espressif/esp-idf/issues/858
Closes IDF-452
* Original commit: espressif/esp-idf@d0b9829eef
drop uart ll driver fix: soc: prevent speculative reads from FIFO at -O2 optimization
(new compiler fixes this issue)
* Original commit: espressif/esp-idf@b28b62b194
check master read write functions with array of registers)
fix master serial processing code and modbus controller to work with register array
modbus_master: add reading and writing of test value array (58 registers) to check failure is gone
remove parameter temporary buffer from modbus controller to allow more than 24 byte writes
driver: fix issue with TOUT feature
driver: fix uart_rx_timeout issue
driver: fix issue with rxfifo_tout_int_raw not triggered when received fifo_len = 120 byte and all bytes read out of fifo as result of rxfifo_full_int_raw
driver: add function uart_internal_set_always_rx_timeout() to always handle tout interrupt
examples: call uart_internal_set_always_rx_timeout() to handle tout interrupt correctly
examples: update examples to use tout feature
driver: reflect changes of uart_set_always_rx_timeout() function, change uart.c
driver: change conditions to trigger workaround for tout feature in uart.c
driver: change uart_set_always_rx_timeout()
freemodbus: fix tabs, remove commented code
driver: remove uart_ll_is_rx_idle()
* Original commit: espressif/esp-idf@3abdd2207d
tout_thr - move calculation and masking into hal layer update driver and uart_ll (add uart_ll_set_rx_tout)
move tout calculation into uart_ll
move calculation of time out in bit time for esp32s2 into low level uart_ll.h file
move uart_hal_get_symb_len() into hal
update set_rx_timeout() to warn user about incorrect value
update HAL, LL 1
fix uart_xx_set_rx_tout() to convert symbol time into bit time
update param description
update tout calculation in LL
update uart_hal_get_max_rx_timeout_thrd() and uart_ll_get_max_rx_timeout_thrd()
* Original commit: espressif/esp-idf@16e6e63694
Alex Lisitsyn
Chen Yudong
Darian Leung
morris
Roland Dobai
yuanjm
David Cermak
Marius Vikhammer
Fu Hanxi
Angus Gratton
Michael (XIAO Xufeng)
Ivan Grokhotkov
Felipe Neves
He Yin Ling