Remove SlotData

Because a slot id is smaller than a pointer, this change will ultimately allow reducing the slot size.

.clang-format

@@ -1,10 +1,12 @@
 # http://clang.llvm.org/docs/ClangFormatStyleOptions.html
 
 BasedOnStyle: Google
-Standard: Cpp03
+Standard: c++11
 AllowShortFunctionsOnASingleLine: Empty
 IncludeBlocks: Preserve
 IndentPPDirectives: AfterHash
+DerivePointerAlignment: false
 
 # Always break after if to get accurate coverage
 AllowShortIfStatementsOnASingleLine: false
+AllowShortLoopsOnASingleLine: false

.devcontainer/clang10/devcontainer.json

@@ -0,0 +1,18 @@
+{
+	"name": "Clang 10",
+	"image": "conanio/clang10",
+	"runArgs": [
+		"--name=ArduinoJson-clang10"
+	],
+	"customizations": {
+		"vscode": {
+			"extensions": [
+				"ms-vscode.cmake-tools"
+			],
+			"settings": {
+				"cmake.generator": "Unix Makefiles",
+				"cmake.buildDirectory": "/tmp/build"
+			}
+		}
+	}
+}

.devcontainer/clang11/devcontainer.json

@@ -0,0 +1,18 @@
+{
+	"name": "Clang 11",
+	"image": "conanio/clang11",
+	"runArgs": [
+		"--name=ArduinoJson-clang11"
+	],
+	"customizations": {
+		"vscode": {
+			"extensions": [
+				"ms-vscode.cmake-tools"
+			],
+			"settings": {
+				"cmake.generator": "Unix Makefiles",
+				"cmake.buildDirectory": "/tmp/build"
+			}
+		}
+	}
+}

.devcontainer/clang13/Dockerfile

@@ -0,0 +1,5 @@
+FROM ubuntu:22.04
+
+RUN apt-get update
+RUN apt-get install -y cmake git clang-13 libc++-13-dev libc++abi-13-dev
+ENV CC=clang-13 CXX=clang++-13

.devcontainer/clang13/devcontainer.json

@@ -0,0 +1,20 @@
+{
+	"name": "Clang 13",
+	"build": {
+		"dockerfile": "Dockerfile"
+	},
+	"runArgs": [
+		"--name=ArduinoJson-clang13"
+	],
+	"customizations": {
+		"vscode": {
+			"extensions": [
+				"ms-vscode.cmake-tools"
+			],
+			"settings": {
+				"cmake.generator": "Unix Makefiles",
+				"cmake.buildDirectory": "/tmp/build"
+			}
+		}
+	}
+}

.devcontainer/clang14/Dockerfile

@@ -0,0 +1,5 @@
+FROM ubuntu:22.04
+
+RUN apt-get update
+RUN apt-get install -y cmake git clang-14 libc++-14-dev libc++abi-14-dev
+ENV CC=clang-14 CXX=clang++-14

.devcontainer/clang14/devcontainer.json

@@ -0,0 +1,20 @@
+{
+	"name": "Clang 14",
+	"build": {
+		"dockerfile": "Dockerfile"
+	},
+	"runArgs": [
+		"--name=ArduinoJson-clang14"
+	],
+	"customizations": {
+		"vscode": {
+			"extensions": [
+				"ms-vscode.cmake-tools"
+			],
+			"settings": {
+				"cmake.generator": "Unix Makefiles",
+				"cmake.buildDirectory": "/tmp/build"
+			}
+		}
+	}
+}

.devcontainer/clang15/Dockerfile

@@ -0,0 +1,5 @@
+FROM ubuntu:22.04
+
+RUN apt-get update
+RUN apt-get install -y cmake git clang-15 libc++-15-dev libc++abi-15-dev
+ENV CC=clang-15 CXX=clang++-15

.devcontainer/clang15/devcontainer.json

@@ -0,0 +1,20 @@
+{
+	"name": "Clang 15",
+	"build": {
+		"dockerfile": "Dockerfile"
+	},
+	"runArgs": [
+		"--name=ArduinoJson-clang15"
+	],
+	"customizations": {
+		"vscode": {
+			"extensions": [
+				"ms-vscode.cmake-tools"
+			],
+			"settings": {
+				"cmake.generator": "Unix Makefiles",
+				"cmake.buildDirectory": "/tmp/build"
+			}
+		}
+	}
+}

.devcontainer/clang16/Dockerfile

@@ -0,0 +1,5 @@
+FROM ubuntu:22.04
+
+RUN apt-get update
+RUN apt-get install -y cmake git clang-16 libc++-16-dev libc++abi-16-dev
+ENV CC=clang-16 CXX=clang++-16

.devcontainer/clang16/devcontainer.json

@@ -0,0 +1,20 @@
+{
+	"name": "Clang 16",
+	"build": {
+		"dockerfile": "Dockerfile"
+	},
+	"runArgs": [
+		"--name=ArduinoJson-clang16"
+	],
+	"customizations": {
+		"vscode": {
+			"extensions": [
+				"ms-vscode.cmake-tools"
+			],
+			"settings": {
+				"cmake.generator": "Unix Makefiles",
+				"cmake.buildDirectory": "/tmp/build"
+			}
+		}
+	}
+}

.devcontainer/clang17/Dockerfile

@@ -0,0 +1,5 @@
+FROM ubuntu:24.04
+
+RUN apt-get update
+RUN apt-get install -y cmake git clang-17 libc++-17-dev libc++abi-17-dev
+ENV CC=clang-17 CXX=clang++-17

.devcontainer/clang17/devcontainer.json

@@ -0,0 +1,20 @@
+{
+	"name": "Clang 17",
+	"build": {
+		"dockerfile": "Dockerfile"
+	},
+	"runArgs": [
+		"--name=ArduinoJson-clang17"
+	],
+	"customizations": {
+		"vscode": {
+			"extensions": [
+				"ms-vscode.cmake-tools"
+			],
+			"settings": {
+				"cmake.generator": "Unix Makefiles",
+				"cmake.buildDirectory": "/tmp/build"
+			}
+		}
+	}
+}

.devcontainer/clang5/devcontainer.json

@@ -0,0 +1,18 @@
+{
+	"name": "Clang 5",
+	"image": "conanio/clang50",
+	"runArgs": [
+		"--name=ArduinoJson-clang5"
+	],
+	"customizations": {
+		"vscode": {
+			"extensions": [
+				"ms-vscode.cmake-tools"
+			],
+			"settings": {
+				"cmake.generator": "Unix Makefiles",
+				"cmake.buildDirectory": "/tmp/build"
+			}
+		}
+	}
+}

.devcontainer/clang6/devcontainer.json

@@ -0,0 +1,18 @@
+{
+	"name": "Clang 6",
+	"image": "conanio/clang60",
+	"runArgs": [
+		"--name=ArduinoJson-clang6"
+	],
+	"customizations": {
+		"vscode": {
+			"extensions": [
+				"ms-vscode.cmake-tools"
+			],
+			"settings": {
+				"cmake.generator": "Unix Makefiles",
+				"cmake.buildDirectory": "/tmp/build"
+			}
+		}
+	}
+}

.devcontainer/clang7/devcontainer.json

@@ -0,0 +1,18 @@
+{
+	"name": "Clang 7",
+	"image": "conanio/clang7",
+	"runArgs": [
+		"--name=ArduinoJson-clang7"
+	],
+	"customizations": {
+		"vscode": {
+			"extensions": [
+				"ms-vscode.cmake-tools"
+			],
+			"settings": {
+				"cmake.generator": "Unix Makefiles",
+				"cmake.buildDirectory": "/tmp/build"
+			}
+		}
+	}
+}

.devcontainer/clang8/devcontainer.json

@@ -0,0 +1,18 @@
+{
+	"name": "Clang 8",
+	"image": "conanio/clang8",
+	"runArgs": [
+		"--name=ArduinoJson-clang8"
+	],
+	"customizations": {
+		"vscode": {
+			"extensions": [
+				"ms-vscode.cmake-tools"
+			],
+			"settings": {
+				"cmake.generator": "Unix Makefiles",
+				"cmake.buildDirectory": "/tmp/build"
+			}
+		}
+	}
+}

.devcontainer/clang9/devcontainer.json

@@ -0,0 +1,18 @@
+{
+	"name": "Clang 9",
+	"image": "conanio/clang9",
+	"runArgs": [
+		"--name=ArduinoJson-clang9"
+	],
+	"customizations": {
+		"vscode": {
+			"extensions": [
+				"ms-vscode.cmake-tools"
+			],
+			"settings": {
+				"cmake.generator": "Unix Makefiles",
+				"cmake.buildDirectory": "/tmp/build"
+			}
+		}
+	}
+}

.devcontainer/gcc10/devcontainer.json

@@ -0,0 +1,18 @@
+{
+	"name": "GCC 10",
+	"image": "conanio/gcc10",
+	"runArgs": [
+		"--name=ArduinoJson-gcc10"
+	],
+	"customizations": {
+		"vscode": {
+			"extensions": [
+				"ms-vscode.cmake-tools"
+			],
+			"settings": {
+				"cmake.generator": "Unix Makefiles",
+				"cmake.buildDirectory": "/tmp/build"
+			}
+		}
+	}
+}

.devcontainer/gcc11/devcontainer.json

@@ -0,0 +1,18 @@
+{
+	"name": "GCC 11",
+	"image": "conanio/gcc11",
+	"runArgs": [
+		"--name=ArduinoJson-gcc11"
+	],
+	"customizations": {
+		"vscode": {
+			"extensions": [
+				"ms-vscode.cmake-tools"
+			],
+			"settings": {
+				"cmake.generator": "Unix Makefiles",
+				"cmake.buildDirectory": "/tmp/build"
+			}
+		}
+	}
+}

.devcontainer/gcc12/Dockerfile

@@ -0,0 +1,4 @@
+FROM ubuntu:22.04
+
+RUN apt-get update
+RUN apt-get install -y cmake git g++-12

.devcontainer/gcc12/devcontainer.json

@@ -0,0 +1,20 @@
+{
+	"name": "GCC 12",
+	"build": {
+		"dockerfile": "Dockerfile",
+	},
+	"runArgs": [
+		"--name=ArduinoJson-gcc12"
+	],
+	"customizations": {
+		"vscode": {
+			"extensions": [
+				"ms-vscode.cmake-tools"
+			],
+			"settings": {
+				"cmake.generator": "Unix Makefiles",
+				"cmake.buildDirectory": "/tmp/build"
+			}
+		}
+	}
+}

.devcontainer/gcc48/devcontainer.json

@@ -0,0 +1,20 @@
+{
+	"name": "GCC 4.8",
+	"image": "conanio/gcc48",
+	"runArgs": [
+		"--name=ArduinoJson-gcc48"
+	],
+	"customizations": {
+		"vscode": {
+			"extensions": [
+				"ms-vscode.cmake-tools",
+				"josetr.cmake-language-support-vscode",
+				"ms-vscode.cpptools"
+			],
+			"settings": {
+				"cmake.generator": "Unix Makefiles",
+				"cmake.buildDirectory": "/tmp/build"
+			}
+		}
+	}
+}

.devcontainer/gcc5/devcontainer.json

@@ -0,0 +1,18 @@
+{
+	"name": "GCC 5",
+	"image": "conanio/gcc5",
+	"runArgs": [
+		"--name=ArduinoJson-gcc5"
+	],
+	"customizations": {
+		"vscode": {
+			"extensions": [
+				"ms-vscode.cmake-tools"
+			],
+			"settings": {
+				"cmake.generator": "Unix Makefiles",
+				"cmake.buildDirectory": "/tmp/build"
+			}
+		}
+	}
+}

.devcontainer/gcc6/devcontainer.json

@@ -0,0 +1,18 @@
+{
+	"name": "GCC 6",
+	"image": "conanio/gcc6",
+	"runArgs": [
+		"--name=ArduinoJson-gcc6"
+	],
+	"customizations": {
+		"vscode": {
+			"extensions": [
+				"ms-vscode.cmake-tools"
+			],
+			"settings": {
+				"cmake.generator": "Unix Makefiles",
+				"cmake.buildDirectory": "/tmp/build"
+			}
+		}
+	}
+}

.devcontainer/gcc7/devcontainer.json

@@ -0,0 +1,18 @@
+{
+	"name": "GCC 7",
+	"image": "conanio/gcc7",
+	"runArgs": [
+		"--name=ArduinoJson-gcc7"
+	],
+	"customizations": {
+		"vscode": {
+			"extensions": [
+				"ms-vscode.cmake-tools"
+			],
+			"settings": {
+				"cmake.generator": "Unix Makefiles",
+				"cmake.buildDirectory": "/tmp/build"
+			}
+		}
+	}
+}

.devcontainer/gcc8/devcontainer.json

@@ -0,0 +1,18 @@
+{
+	"name": "GCC 8",
+	"image": "conanio/gcc8",
+	"runArgs": [
+		"--name=ArduinoJson-gcc8"
+	],
+	"customizations": {
+		"vscode": {
+			"extensions": [
+				"ms-vscode.cmake-tools"
+			],
+			"settings": {
+				"cmake.generator": "Unix Makefiles",
+				"cmake.buildDirectory": "/tmp/build"
+			}
+		}
+	}
+}

.devcontainer/gcc9/devcontainer.json

@@ -0,0 +1,18 @@
+{
+	"name": "GCC 9",
+	"image": "conanio/gcc9",
+	"runArgs": [
+		"--name=ArduinoJson-gcc9"
+	],
+	"customizations": {
+		"vscode": {
+			"extensions": [
+				"ms-vscode.cmake-tools"
+			],
+			"settings": {
+				"cmake.generator": "Unix Makefiles",
+				"cmake.buildDirectory": "/tmp/build"
+			}
+		}
+	}
+}

.gitattributes

@@ -1 +1,2 @@
-*.sh text eol=lf
+* text=auto
+*.sh text eol=lf

.github/ISSUE_TEMPLATE/bug_report.md

@@ -14,7 +14,7 @@ Before opening a bug report, please use the ArduinoJson Troubleshooter as it may
 A clear and concise description of what the bug is.
 
 **Troubleshooter report**  
-Here is the report generated by the [ArduinoJson Troubleshooter](https://arduinojson.org/v6/troubleshooter/):  
+Here is the report generated by the [ArduinoJson Troubleshooter](https://arduinojson.org/v7/troubleshooter/):  
 [Paste the report here]
 
 **Environment**  
@@ -27,7 +27,7 @@ Here is the environment that I used:
 Here is a small snippet that reproduces the issue.
 
 ```c++
-DynamicJsonDocument doc(1024);
+JsonDocument doc;
 
 DeserializationError error = deserializeJson(doc, "{\"hello\":\"world\"}");
 

.github/ISSUE_TEMPLATE/config.yml

@@ -1,8 +1,8 @@
 blank_issues_enabled: true
 contact_links:
   - name: 👨‍🏫 ArduinoJson Assistant
-    url: https://arduinojson.org/v6/assistant/
+    url: https://arduinojson.org/v7/assistant/
     about: An online tool that computes memory requirements and generates scaffolding code for your project.
   - name: 👨‍⚕️ ArduinoJson Troubleshooter
-    url: https://arduinojson.org/v6/troubleshooter/
+    url: https://arduinojson.org/v7/troubleshooter/
     about: An online tool that helps you diagnose the most common issues with ArduinoJson.

.github/ISSUE_TEMPLATE/help.md

@@ -15,7 +15,7 @@ A clear and concise description of what you're trying to do.
 You don't need to explain every aspect of your project: focus on the problem you're having.
 
 **Troubleshooter report**  
-Here is the report generated by the [ArduinoJson Troubleshooter](https://arduinojson.org/v6/troubleshooter/):  
+Here is the report generated by the [ArduinoJson Troubleshooter](https://arduinojson.org/v7/troubleshooter/):  
 [Paste the report here]
 
 **Environment**  
@@ -28,7 +28,7 @@ Here is the environment that I'm using':
 Here is a small snippet that demonstrate the problem.
 
 ```c++
-DynamicJsonDocument doc(1024);
+JsonDocument doc;
 
 DeserializationError error = deserializeJson(doc, "{\"hello\":\"world\"}");
 

.github/workflows/ci.yml

@@ -2,35 +2,42 @@ name: Continuous Integration
 
 on: [push, pull_request]
 
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+
 jobs:
   lint:
     name: Lint
-    runs-on: ubuntu-20.04
+    runs-on: ubuntu-22.04
     steps:
       - name: Install
         run: sudo apt-get install -y clang-format
       - name: Checkout
-        uses: actions/checkout@v2
+        uses: actions/checkout@v4
       - name: Symlinks
         run: find * -type l -printf "::error::%p is a symlink. This is forbidden by the Arduino Library Specification." -exec false {} +
       - name: Clang-format
         run: |
           find src/ extras/ -name '*.[ch]pp' | xargs clang-format -i --verbose --style=file
           git diff --exit-code
+      - name: Check URLs
+        run: |
+          grep -hREo "(http|https)://[a-zA-Z0-9./?=_%:-]*" src/ | sort -u | while read -r URL
+          do
+            STATUS=$(curl -s -o /dev/null -I -w "%{http_code}" "$URL")
+            [ "$STATUS" -ge 400 ] && echo "::warning title=HTTP $STATUS::$URL returned $STATUS"
+          done || true
 
   gcc:
     name: GCC
     needs: lint
-    runs-on: ubuntu-20.04
+    runs-on: ubuntu-22.04
     strategy:
       fail-fast: false
       matrix:
         include:
-          - gcc: "4.4"
-          - gcc: "4.6"
-          - gcc: "4.7"
           - gcc: "4.8"
-          - gcc: "4.9"
           - gcc: "5"
           - gcc: "6"
           - gcc: "7"
@@ -42,75 +49,97 @@ jobs:
           - gcc: "10"
             cxxflags: -funsigned-char # Issue #1715
           - gcc: "11"
+          - gcc: "12"
     steps:
+      - name: Workaround for actions/runner-images#9491
+        run: sudo sysctl vm.mmap_rnd_bits=28
+
       - name: Install
         run: |
-          sudo add-apt-repository -yn 'deb http://archive.ubuntu.com/ubuntu/ trusty main'
-          sudo add-apt-repository -yn 'deb http://archive.ubuntu.com/ubuntu/ trusty universe'
-          sudo add-apt-repository -yn 'deb http://archive.ubuntu.com/ubuntu/ xenial main'
-          sudo add-apt-repository -yn 'deb http://archive.ubuntu.com/ubuntu/ xenial universe'
-          sudo add-apt-repository -yn 'deb http://archive.ubuntu.com/ubuntu/ bionic main'
-          sudo add-apt-repository -yn 'deb http://archive.ubuntu.com/ubuntu/ bionic universe'
-          sudo add-apt-repository -yn 'deb http://mirrors.kernel.org/ubuntu hirsute main universe'
+          sudo apt-key adv --keyserver keyserver.ubuntu.com --recv-keys 40976EAF437D05B5 3B4FE6ACC0B21F32
+          sudo add-apt-repository -yn 'deb http://archive.ubuntu.com/ubuntu/ xenial main universe'
+          sudo add-apt-repository -yn 'deb http://archive.ubuntu.com/ubuntu/ bionic main universe'
+          sudo add-apt-repository -yn 'deb http://archive.ubuntu.com/ubuntu/ focal main universe'
           sudo apt-get update
           sudo apt-get install -y gcc-${{ matrix.gcc }} g++-${{ matrix.gcc }}
+        timeout-minutes: 5
+
       - name: Checkout
-        uses: actions/checkout@v2
+        uses: actions/checkout@v4
+        timeout-minutes: 1
+
       - name: Configure
         run: cmake -DCMAKE_BUILD_TYPE=Debug .
         env:
           CC: gcc-${{ matrix.gcc }}
           CXX: g++-${{ matrix.gcc }}
           CXXFLAGS: ${{ matrix.cxxflags }}
+        timeout-minutes: 1
+
       - name: Build
         run: cmake --build .
+        timeout-minutes: 10
+
       - name: Test
         run: ctest --output-on-failure -C Debug .
         env:
           UBSAN_OPTIONS: print_stacktrace=1
+        timeout-minutes: 2
 
   clang:
     name: Clang
     needs: lint
-    runs-on: ubuntu-20.04
     strategy:
       fail-fast: false
       matrix:
         include:
-          - clang: "3.5"
-            cxxflags: "-stdlib=libc++"
-          - clang: "3.6"
-            cxxflags: "-stdlib=libc++"
-          - clang: "3.7"
-            cxxflags: "-stdlib=libc++"
-          - clang: "3.8"
-            cxxflags: "-stdlib=libc++"
-          - clang: "3.9"
-            cxxflags: "-stdlib=libc++"
-          - clang: "4.0"
-            cxxflags: "-stdlib=libc++"
-          - clang: "5.0"
-          - clang: "6.0"
           - clang: "7"
+            runner: ubuntu-22.04
+            archive: focal
           - clang: "8"
             cxxflags: -fsanitize=leak -fno-sanitize-recover=all
+            runner: ubuntu-22.04
+            archive: focal
           - clang: "9"
             cxxflags: -fsanitize=undefined -fno-sanitize-recover=all
+            runner: ubuntu-22.04
+            archive: focal
           - clang: "10"
             cxxflags: -fsanitize=address -fno-sanitize-recover=all
+            runner: ubuntu-22.04
+            archive: focal
+          - clang: "11"
+            runner: ubuntu-22.04
+          - clang: "12"
+            runner: ubuntu-22.04
+          - clang: "13"
+            runner: ubuntu-22.04
+          - clang: 14
+          - clang: 15
+          - clang: 16
+          - clang: 17
+          - clang: 18
+          - clang: 19
+    runs-on: ${{ matrix.runner || 'ubuntu-latest' }}
     steps:
-      - name: Install
+      - name: Add archive repositories
+        if: matrix.archive
+        run: |
+          sudo gpg --keyserver keyserver.ubuntu.com --recv-keys 3B4FE6ACC0B21F32
+          sudo gpg --export 3B4FE6ACC0B21F32 | sudo tee /etc/apt/trusted.gpg.d/ubuntu-keyring.gpg > /dev/null
+          sudo add-apt-repository -yn 'deb http://archive.ubuntu.com/ubuntu/ ${{ matrix.archive }} main'
+          sudo add-apt-repository -yn 'deb http://archive.ubuntu.com/ubuntu/ ${{ matrix.archive }} universe'
+      - name: Install Clang ${{ matrix.clang }}
         run: |
-          sudo add-apt-repository -yn 'deb http://archive.ubuntu.com/ubuntu/ trusty main'
-          sudo add-apt-repository -yn 'deb http://archive.ubuntu.com/ubuntu/ trusty universe'
-          sudo add-apt-repository -yn 'deb http://archive.ubuntu.com/ubuntu/ xenial main'
-          sudo add-apt-repository -yn 'deb http://archive.ubuntu.com/ubuntu/ xenial universe'
-          sudo add-apt-repository -yn 'deb http://archive.ubuntu.com/ubuntu/ bionic main'
-          sudo add-apt-repository -yn 'deb http://archive.ubuntu.com/ubuntu/ bionic universe'
           sudo apt-get update
           sudo apt-get install -y clang-${{ matrix.clang }}
+      - name: Install libc++ ${{ matrix.clang }}
+        run: sudo apt-get install -y libc++-${{ matrix.clang }}-dev libc++abi-${{ matrix.clang }}-dev
+      - name: Install libunwind ${{ matrix.clang }}
+        if: matrix.clang == 12 # dependency is missing in Ubuntu 22.04
+        run: sudo apt-get install -y libunwind-${{ matrix.clang }}-dev
       - name: Checkout
-        uses: actions/checkout@v2
+        uses: actions/checkout@v4
       - name: Configure
         run: cmake -DCMAKE_BUILD_TYPE=Debug .
         env:
@@ -118,7 +147,7 @@ jobs:
           CXX: clang++-${{ matrix.clang }}
           CXXFLAGS: >-
             ${{ matrix.cxxflags }}
-            ${{ contains(matrix.cxxflags, 'libc++') && '-I/usr/lib/llvm-10/include/c++/v1/' || '' }}
+            ${{ matrix.clang < 11 && '-I/usr/lib/llvm-10/include/c++/v1/' || '' }}
       - name: Build
         run: cmake --build .
       - name: Test
@@ -129,12 +158,16 @@ jobs:
   conf_test:
     name: Test configuration on Linux
     needs: [gcc, clang]
-    runs-on: ubuntu-20.04
+    runs-on: ubuntu-22.04
     steps:
       - name: Install
-        run: sudo apt-get install -y g++-multilib
+        run: |
+          sudo apt-get update
+          sudo apt-get install -y g++-multilib gcc-avr avr-libc
       - name: Checkout
-        uses: actions/checkout@v2
+        uses: actions/checkout@v4
+      - name: AVR
+        run: avr-g++ -std=c++11 -Isrc extras/conf_test/avr.cpp
       - name: GCC 32-bit
         run: g++ -std=c++11 -m32 -Isrc extras/conf_test/x86.cpp
       - name: GCC 64-bit
@@ -150,7 +183,7 @@ jobs:
     needs: [gcc, clang]
     steps:
       - name: Checkout
-        uses: actions/checkout@v2
+        uses: actions/checkout@v4
       - name: 32-bit
         run: |
           call "C:\Program Files (x86)\Microsoft Visual Studio\2019\Enterprise\VC\Auxiliary\Build\vcvars32.bat"
@@ -165,17 +198,20 @@ jobs:
   xcode:
     name: XCode
     needs: clang
-    runs-on: macos-10.15
+    runs-on: macos-13
     strategy:
       fail-fast: false
       matrix:
         include:
-          - xcode: "10.3"
-          - xcode: "11.7"
-          - xcode: "12.4"
+          - xcode: "14.1"
+          - xcode: "14.2"
+          - xcode: "14.3.1"
+          - xcode: "15.0.1"
+          - xcode: "15.1"
+          - xcode: "15.2"
     steps:
       - name: Checkout
-        uses: actions/checkout@v2
+        uses: actions/checkout@v4
       - name: Select XCode version
         run: sudo xcode-select --switch /Applications/Xcode_${{ matrix.xcode }}.app
       - name: Configure
@@ -197,7 +233,7 @@ jobs:
   #   runs-on: ${{ matrix.os }}
   #   steps:
   #     - name: Checkout
-  #       uses: actions/checkout@v2
+  #       uses: actions/checkout@v4
   #     - name: Configure
   #       run: cmake -DCMAKE_BUILD_TYPE=Debug .
   #     - name: Build
@@ -216,12 +252,12 @@ jobs:
             board: arduino:avr:uno
           - core: arduino:samd
             board: arduino:samd:mkr1000
-    runs-on: ubuntu-20.04
+    runs-on: ubuntu-22.04
     steps:
       - name: Checkout
-        uses: actions/checkout@v2
+        uses: actions/checkout@v4
       - name: Install arduino-cli
-        run: brew update && brew install arduino-cli
+        run: curl -fsSL https://raw.githubusercontent.com/arduino/arduino-cli/master/install.sh | BINDIR=/usr/local/bin sh
       - name: Install core
         run: arduino-cli core install ${{ matrix.core }}
       - name: Install libraries
@@ -292,14 +328,14 @@ jobs:
             conf_test: esp8266
     steps:
       - name: Checkout
-        uses: actions/checkout@v2
+        uses: actions/checkout@v4
       - name: Set up cache for pip
-        uses: actions/cache@v2
+        uses: actions/cache@v4
         with:
           path: ~/.cache/pip
           key: ${{ runner.os }}-pip
       - name: Set up Python 3.x
-        uses: actions/setup-python@v2
+        uses: actions/setup-python@v5
         with:
           python-version: "3.x"
       - name: Install PlatformIO
@@ -311,7 +347,7 @@ jobs:
         if: ${{ matrix.platform == 'nordicnrf52' }}
         run: find examples/ -name '*.ino' -exec sed -i 's/\(#include <ArduinoJson.h>\)/\1\n#include <Adafruit_TinyUSB.h>/' {} +
       - name: Set up cache for platformio
-        uses: actions/cache@v2
+        uses: actions/cache@v4
         with:
           path: ~/.platformio
           key: ${{ runner.os }}-platformio-${{ matrix.platform }}
@@ -360,7 +396,7 @@ jobs:
           - board: argon
     steps:
       - name: Checkout
-        uses: actions/checkout@v2
+        uses: actions/checkout@v4
       - name: Install Particle CLI
         run: sudo npm install -g particle-cli
       - name: Login to Particle
@@ -371,14 +407,14 @@ jobs:
   arm:
     name: GCC for ARM processor
     needs: gcc
-    runs-on: ubuntu-20.04
+    runs-on: ubuntu-22.04
     steps:
       - name: Install
         run: |
           sudo apt-get update
           sudo apt-get install -y g++-arm-linux-gnueabihf
       - name: Checkout
-        uses: actions/checkout@v2
+        uses: actions/checkout@v4
       - name: Configure
         run: cmake .
         env:
@@ -390,18 +426,18 @@ jobs:
   coverage:
     needs: gcc
     name: Coverage
-    runs-on: ubuntu-20.04
+    runs-on: ubuntu-22.04
     steps:
       - name: Install
         run: sudo apt-get install -y lcov ninja-build
       - name: Checkout
-        uses: actions/checkout@v2
+        uses: actions/checkout@v4
       - name: Configure
         run: cmake -G Ninja -DCOVERAGE=true .
       - name: Build
         run: ninja
       - name: Test
-        run: ctest -LE 'WillFail|Fuzzing' -T test
+        run: ctest --output-on-failure -LE 'WillFail|Fuzzing' -T test
       - name: lcov --capture
         run: lcov --capture --no-external --directory . --output-file coverage.info
       - name: lcov --remove
@@ -409,12 +445,12 @@ jobs:
       - name: genhtml
         run: mkdir coverage && genhtml coverage_filtered.info -o coverage -t ArduinoJson
       - name: Upload HTML report
-        uses: actions/upload-artifact@v2
+        uses: actions/upload-artifact@v4
         with:
           name: Coverage report
           path: coverage
       - name: Upload to Coveralls
-        uses: coverallsapp/github-action@master
+        uses: coverallsapp/github-action@v2
         with:
           github-token: ${{ secrets.GITHUB_TOKEN }}
           path-to-lcov: coverage_filtered.info
@@ -422,107 +458,87 @@ jobs:
   valgrind:
     needs: gcc
     name: Valgrind
-    runs-on: ubuntu-20.04
+    runs-on: ubuntu-22.04
     steps:
       - name: Install
-        run: sudo apt-get install -y valgrind ninja-build
+        run: |
+          sudo apt-get update
+          sudo apt-get install -y valgrind ninja-build
       - name: Checkout
-        uses: actions/checkout@v2
+        uses: actions/checkout@v4
       - name: Configure
         run: cmake -G Ninja -D MEMORYCHECK_COMMAND_OPTIONS="--error-exitcode=1 --leak-check=full"  .
       - name: Build
         run: ninja
       - name: Memcheck
-        run: ctest -LE WillFail -T memcheck
+        run: ctest --output-on-failure -LE WillFail -T memcheck
         id: memcheck
       - name: MemoryChecker.*.log
-        run: cat Testing/Temporary/MemoryChecker.*.log
+        run: cat Testing/Temporary/MemoryChecker.*.log > $GITHUB_STEP_SUMMARY
         if: failure()
 
   clang-tidy:
     needs: clang
     name: Clang-Tidy
-    runs-on: ubuntu-20.04
+    runs-on: ubuntu-latest
     steps:
       - name: Install
-        run: sudo apt-get install -y clang-tidy cmake ninja-build
+        run: sudo apt-get install -y clang-tidy libc++-dev libc++abi-dev
       - name: Checkout
-        uses: actions/checkout@v2
+        uses: actions/checkout@v4
       - name: Configure
-        run: cmake -G Ninja -DCMAKE_CXX_CLANG_TIDY="clang-tidy-10;--warnings-as-errors=*" -DCMAKE_BUILD_TYPE=Debug .
+        run: cmake -G Ninja -DCMAKE_CXX_CLANG_TIDY="clang-tidy;--warnings-as-errors=*" -DCMAKE_BUILD_TYPE=Debug .
         env:
-          CC: clang-10
-          CXX: clang++-10
+          CC: clang
+          CXX: clang++
       - name: Check
         run: cmake --build . -- -k 0
 
-  amalgamate-h:
+  amalgamate:
     needs: gcc
     name: Amalgamate ArduinoJson.h
-    runs-on: ubuntu-20.04
+    runs-on: ubuntu-22.04
     steps:
       - name: Checkout
-        uses: actions/checkout@v2
-      - name: Amalgamate
-        id: amalgamate
+        uses: actions/checkout@v4
+      - name: Setup
         run: |
           if [[ $GITHUB_REF == refs/tags/* ]]; then
             VERSION=${GITHUB_REF#refs/tags/}
           else
             VERSION=${GITHUB_SHA::7}
           fi
-          INPUT=src/ArduinoJson.h
-          OUTPUT=ArduinoJson-$VERSION.h
-          extras/scripts/build-single-header.sh "$INPUT" "$OUTPUT"
-          echo ::set-output name=filename::${OUTPUT}
-      - name: Smoke test
+          echo "ARDUINOJSON_H=ArduinoJson-$VERSION.h" >> $GITHUB_ENV
+          echo "ARDUINOJSON_HPP=ArduinoJson-$VERSION.hpp" >> $GITHUB_ENV
+      - name: Amalgamate ArduinoJson.h
+        run: extras/scripts/build-single-header.sh "src/ArduinoJson.h" "$ARDUINOJSON_H"
+      - name: Amalgamate ArduinoJson.hpp
+        run: extras/scripts/build-single-header.sh "src/ArduinoJson.hpp" "$ARDUINOJSON_HPP"
+      - name: Upload artifact
+        uses: actions/upload-artifact@v4
+        with:
+          name: Single headers
+          path: |
+            ${{ env.ARDUINOJSON_H }}
+            ${{ env.ARDUINOJSON_HPP }}
+      - name: Smoke test ArduinoJson.h
         run: |
           g++ -x c++ - <<END
-          #include "${{ steps.amalgamate.outputs.filename }}"
+          #include "$ARDUINOJSON_H"
           int main() {
-            StaticJsonDocument<300> doc;
+            JsonDocument doc;
             deserializeJson(doc, "{}");
           }
           END
-      - name: Upload artifact
-        uses: actions/upload-artifact@v2
-        with:
-          name: Single headers
-          path: ${{ steps.amalgamate.outputs.filename }}
-
-  amalgamate-hpp:
-    needs: gcc
-    name: Amalgamate ArduinoJson.hpp
-    runs-on: ubuntu-20.04
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v2
-      - name: Amalgamate
-        id: amalgamate
-        run: |
-          if [[ $GITHUB_REF == refs/tags/* ]]; then
-            VERSION=${GITHUB_REF#refs/tags/}
-          else
-            VERSION=${GITHUB_SHA::7}
-          fi
-          INPUT=src/ArduinoJson.hpp
-          OUTPUT=ArduinoJson-$VERSION.hpp
-          extras/scripts/build-single-header.sh "$INPUT" "$OUTPUT"
-          echo ::set-output name=filename::${OUTPUT}
-      - name: Smoke test
+      - name: Smoke test ArduinoJson.hpp
         run: |
           g++ -x c++ - <<END
-          #include "${{ steps.amalgamate.outputs.filename }}"
+          #include "$ARDUINOJSON_HPP"
           int main() {
-            ArduinoJson::StaticJsonDocument<300> doc;
+            ArduinoJson::JsonDocument doc;
             deserializeJson(doc, "{}");
           }
           END
-      - name: Upload artifact
-        uses: actions/upload-artifact@v2
-        with:
-          name: Single headers
-          path: ${{ steps.amalgamate.outputs.filename }}
 
   esp-idf:
     needs: gcc
@@ -530,14 +546,14 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Setup cache
-        uses: actions/cache@v2
+        uses: actions/cache@v4
         with:
           path: ~/.espressif
           key: ${{ runner.os }}-esp-idf
       - name: Checkout ArduinoJson
-        uses: actions/checkout@v2
+        uses: actions/checkout@v4
       - name: Checkout ESP-IDF
-        uses: actions/checkout@v2
+        uses: actions/checkout@v4
         with:
           repository: espressif/esp-idf
           path: esp-idf
@@ -554,3 +570,32 @@ jobs:
           source esp-idf/export.sh
           cd extras/ci/espidf
           idf.py build
+
+  codeql:
+    name: CodeQL
+    runs-on: ubuntu-22.04
+    needs: gcc
+
+    permissions:
+      actions: read
+      contents: read
+      security-events: write
+
+    steps:
+      - name: Checkout repository
+        uses: actions/checkout@v4
+
+      - name: Initialize CodeQL
+        uses: github/codeql-action/init@v3
+        with:
+          languages: cpp
+
+      - name: Build
+        run: |
+          cmake -DCMAKE_BUILD_TYPE=Debug .
+          cmake --build .
+
+      - name: Perform CodeQL Analysis
+        uses: github/codeql-action/analyze@v3
+        with:
+          category: "/language:cpp"

.github/workflows/lock.yml

@@ -1,4 +1,4 @@
-name: 'Lock Threads'
+name: Lock Threads
 
 on:
   schedule:
@@ -8,7 +8,7 @@ jobs:
   lock:
     runs-on: ubuntu-latest
     steps:
-      - uses: dessant/lock-threads@v2
+      - uses: dessant/lock-threads@v5
         with:
           github-token: ${{ github.token }}
-          issue-lock-inactive-days: 30
+          issue-inactive-days: 30

.github/workflows/release.yml

@@ -8,44 +8,86 @@ on:
 jobs:
   release:
     name: Create release
-    runs-on: ubuntu-20.04
+    runs-on: ubuntu-22.04
     steps:
       - name: Set variables
         id: init
         run: |
-          echo ::set-output name=tag::${GITHUB_REF#refs/tags/}
-          echo ::set-output name=version::${GITHUB_REF#refs/tags/v}
+          echo "tag=${GITHUB_REF#refs/tags/}" >> $GITHUB_OUTPUT
+          echo "version=${GITHUB_REF#refs/tags/v}" >> $GITHUB_OUTPUT
       - name: Checkout
-        uses: actions/checkout@v2
+        uses: actions/checkout@v4
       - name: Write release body
         id: body
         run: |
           FILENAME=RELEASE.md
-          extras/scripts/get-release-body.sh ${{ steps.init.outputs.tag }} CHANGELOG.md | tee $FILENAME
-          echo ::set-output name=filename::$FILENAME
+          tee $FILENAME <<END
+          ## Changes
+
+          $(extras/scripts/extract_changes.awk CHANGELOG.md)
+
+          [View version history](https://github.com/bblanchon/ArduinoJson/blob/${{ steps.init.outputs.tag }}/CHANGELOG.md)
+          END
+          echo "filename=$FILENAME" >> $GITHUB_OUTPUT
       - name: Amalgamate ArduinoJson.h
         id: amalgamate_h
         run: |
           FILENAME=ArduinoJson-${{ steps.init.outputs.tag }}.h
           extras/scripts/build-single-header.sh src/ArduinoJson.h "$FILENAME"
-          echo ::set-output name=filename::$FILENAME
+          echo "filename=$FILENAME" >> $GITHUB_OUTPUT
       - name: Amalgamate ArduinoJson.hpp
         id: amalgamate_hpp
         run: |
           FILENAME=ArduinoJson-${{ steps.init.outputs.tag }}.hpp
           extras/scripts/build-single-header.sh src/ArduinoJson.hpp "$FILENAME"
-          echo ::set-output name=filename::$FILENAME
-      - name: Create Arduino package
-        id: arduino
-        run: |
-          FILENAME=ArduinoJson-${{ steps.init.outputs.tag }}.zip
-          extras/scripts/build-arduino-package.sh . "$FILENAME"
-          echo ::set-output name=filename::$FILENAME
+          echo "filename=$FILENAME" >> $GITHUB_OUTPUT
       - name: Create release
         uses: ncipollo/release-action@v1
         with:
           bodyFile: ${{ steps.body.outputs.filename }}
-          draft: true
           name: ArduinoJson ${{ steps.init.outputs.version }}
-          artifacts: ${{ steps.amalgamate_h.outputs.filename }},${{ steps.amalgamate_hpp.outputs.filename }},${{ steps.arduino.outputs.filename }}
+          artifacts: ${{ steps.amalgamate_h.outputs.filename }},${{ steps.amalgamate_hpp.outputs.filename }}
           token: ${{ secrets.GITHUB_TOKEN }}
+
+  idf:
+    name: IDF Component Registry
+    runs-on: ubuntu-latest
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v4
+      - name: Upload component to the component registry
+        uses: espressif/upload-components-ci-action@v1
+        with:
+          name: ArduinoJson
+          namespace: bblanchon
+          api_token: ${{ secrets.IDF_COMPONENT_API_TOKEN }}
+
+  particle:
+    name: Particle
+    runs-on: ubuntu-latest
+    steps:
+      - name: Install
+        run: npm install -g particle-cli
+      - name: Checkout
+        uses: actions/checkout@v4
+      - name: Login
+        run: particle login --token ${{ secrets.PARTICLE_TOKEN }}
+      - name: Publish
+        run: bash -eux extras/scripts/publish-particle-library.sh
+
+  platformio:
+    name: PlatformIO
+    runs-on: ubuntu-latest
+    steps:
+      - name: Set up Python 3.x
+        uses: actions/setup-python@v5
+        with:
+          python-version: "3.x"
+      - name: Install PlatformIO
+        run: pip install platformio
+      - name: Checkout
+        uses: actions/checkout@v4
+      - name: Publish
+        run: pio pkg publish --no-interactive --no-notify
+        env:
+          PLATFORMIO_AUTH_TOKEN: ${{ secrets.PLATFORMIO_AUTH_TOKEN }}

.gitignore

@@ -15,3 +15,6 @@
 # Used by CI for Particle
 /src/*.ino
 /project.properties
+
+# Used by IDF
+/dist/

.mbedignore

@@ -1,3 +1,4 @@
+.devcontainer/
 .github/
 examples/
-extras/
+extras/

.vscode/settings.json

@@ -1,22 +1,17 @@
 {
   "C_Cpp.default.configurationProvider": "ms-vscode.cmake-tools",
-  "cmake.generator": "Ninja",
   "git.inputValidationLength": 80,
   "git.inputValidationSubjectLength": 72,
   "files.insertFinalNewline": true,
   "files.trimFinalNewlines": true,
-  "files.associations": {
-    "fstream": "cpp",
-    "iomanip": "cpp",
-    "string": "cpp",
-    "system_error": "cpp",
-    "vector": "cpp",
-    "xlocmon": "cpp",
-    "xlocnum": "cpp",
-    "xloctime": "cpp",
-    "xstring": "cpp"
-  },
   "search.exclude": {
     "/extras/tests/catch/*": true
+  },
+  "C_Cpp.default.includePath": [
+    "/src"
+  ],
+  "[cmake]": {
+    "editor.detectIndentation": false,
+    "editor.insertSpaces": false,
   }
 }

ArduinoJson.h

@@ -1,5 +1,5 @@
 // ArduinoJson - https://arduinojson.org
-// Copyright © 2014-2022, Benoit BLANCHON
+// Copyright © 2014-2025, Benoit BLANCHON
 // MIT License
 
 #include "src/ArduinoJson.h"

CMakeLists.txt

@@ -1,19 +1,19 @@
 # ArduinoJson - https://arduinojson.org
-# Copyright © 2014-2022, Benoit BLANCHON
+# Copyright © 2014-2025, Benoit BLANCHON
 # MIT License
 
 cmake_minimum_required(VERSION 3.15)
 
 if(ESP_PLATFORM)
-   # Build ArduinoJson as an ESP-IDF component
-   idf_component_register(INCLUDE_DIRS src)
-   return()
+	# Build ArduinoJson as an ESP-IDF component
+	idf_component_register(INCLUDE_DIRS src)
+	return()
 endif()
 
-project(ArduinoJson VERSION 6.19.3)
+project(ArduinoJson VERSION 7.4.1)
 
 if(CMAKE_PROJECT_NAME STREQUAL PROJECT_NAME)
-    include(CTest)
+	include(CTest)
 endif()
 
 add_subdirectory(src)

LICENSE.txt

@@ -1,10 +1,10 @@
-The MIT License (MIT)
----------------------
-
-Copyright © 2014-2022, Benoit BLANCHON
-
-Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the “Software”), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
-
-The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+The MIT License (MIT)
+---------------------
+
+Copyright © 2014-2025, Benoit BLANCHON
+
+Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the “Software”), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

README.md

@@ -1,50 +1,47 @@
-![ArduinoJson](banner.svg)
+<p align="center">
+  <a href="https://arduinojson.org/"><img alt="ArduinoJson" src="https://arduinojson.org/images/logo.svg" width="200" /></a>
+</p>
 
 ---
 
-[![GitHub Workflow Status](https://img.shields.io/github/workflow/status/bblanchon/ArduinoJson/Continuous%20Integration?logo=github)](https://github.com/bblanchon/ArduinoJson/actions?query=workflow%3A%22Continuous+Integration%22+branch%3A6.x)
-[![Continuous Integration](https://ci.appveyor.com/api/projects/status/m7s53wav1l0abssg/branch/6.x?svg=true)](https://ci.appveyor.com/project/bblanchon/arduinojson/branch/6.x)
+[![GitHub Workflow Status](https://img.shields.io/github/actions/workflow/status/bblanchon/ArduinoJson/ci.yml?branch=7.x&logo=github)](https://github.com/bblanchon/ArduinoJson/actions?query=workflow%3A%22Continuous+Integration%22+branch%3A7.x)
+[![Continuous Integration](https://ci.appveyor.com/api/projects/status/m7s53wav1l0abssg/branch/7.x?svg=true)](https://ci.appveyor.com/project/bblanchon/arduinojson/branch/7.x)
 [![Fuzzing Status](https://oss-fuzz-build-logs.storage.googleapis.com/badges/arduinojson.svg)](https://bugs.chromium.org/p/oss-fuzz/issues/list?sort=-opened&can=1&q=proj:arduinojson)
-[![LGTM Grade](https://img.shields.io/lgtm/grade/cpp/github/bblanchon/ArduinoJson?label=quality&logo=lgtm)](https://lgtm.com/projects/g/bblanchon/ArduinoJson/)
-[![Coveralls branch](https://img.shields.io/coveralls/github/bblanchon/ArduinoJson/6.x?logo=coveralls)](https://coveralls.io/github/bblanchon/ArduinoJson?branch=6.x)  
-[![Arduino Library Manager](https://img.shields.io/static/v1?label=Arduino&message=v6.19.3&logo=arduino&logoColor=white&color=blue)](https://www.ardu-badge.com/ArduinoJson/6.19.3)
-[![PlatformIO Registry](https://badges.registry.platformio.org/packages/bblanchon/library/ArduinoJson.svg?version=6.19.3)](https://registry.platformio.org/packages/libraries/bblanchon/ArduinoJson?version=6.19.3) 
-[![GitHub stars](https://img.shields.io/github/stars/bblanchon/ArduinoJson?style=flat&logo=github)](https://github.com/bblanchon/ArduinoJson/stargazers)
-[![GitHub Sponsors](https://img.shields.io/github/sponsors/bblanchon?logo=github)](https://github.com/sponsors/bblanchon)
+[![Coveralls branch](https://img.shields.io/coveralls/github/bblanchon/ArduinoJson/7.x?logo=coveralls)](https://coveralls.io/github/bblanchon/ArduinoJson?branch=7.x)  
+[![GitHub stars](https://img.shields.io/github/stars/bblanchon/ArduinoJson?style=flat&logo=github&color=orange)](https://github.com/bblanchon/ArduinoJson/stargazers)
+[![GitHub Sponsors](https://img.shields.io/github/sponsors/bblanchon?logo=github&color=orange)](https://github.com/sponsors/bblanchon)
 
 ArduinoJson is a C++ JSON library for Arduino and IoT (Internet Of Things).
 
 ## Features
 
-* [JSON deserialization](https://arduinojson.org/v6/api/json/deserializejson/?utm_source=github&utm_medium=readme)
-    * [Optionally decodes UTF-16 escape sequences to UTF-8](https://arduinojson.org/v6/api/config/decode_unicode/?utm_source=github&utm_medium=readme)
-    * [Optionally stores links to the input buffer (zero-copy)](https://arduinojson.org/v6/api/json/deserializejson/?utm_source=github&utm_medium=readme)
-    * [Optionally supports comments in the input](https://arduinojson.org/v6/api/config/enable_comments/?utm_source=github&utm_medium=readme)
-    * [Optionally filters the input to keep only desired values](https://arduinojson.org/v6/api/json/deserializejson/?utm_source=github&utm_medium=readme#filtering)
+* [JSON deserialization](https://arduinojson.org/v7/api/json/deserializejson/)
+    * [Optionally decodes UTF-16 escape sequences to UTF-8](https://arduinojson.org/v7/api/config/decode_unicode/)
+    * [Optionally supports comments in the input](https://arduinojson.org/v7/api/config/enable_comments/)
+    * [Optionally filters the input to keep only desired values](https://arduinojson.org/v7/api/json/deserializejson/#filtering)
     * Supports single quotes as a string delimiter
     * Compatible with [NDJSON](http://ndjson.org/) and [JSON Lines](https://jsonlines.org/)
-* [JSON serialization](https://arduinojson.org/v6/api/json/serializejson/?utm_source=github&utm_medium=readme)
-    * [Can write to a buffer or a stream](https://arduinojson.org/v6/api/json/serializejson/?utm_source=github&utm_medium=readme)
-    * [Optionally indents the document (prettified JSON)](https://arduinojson.org/v6/api/json/serializejsonpretty/?utm_source=github&utm_medium=readme)
-* [MessagePack serialization](https://arduinojson.org/v6/api/msgpack/serializemsgpack/?utm_source=github&utm_medium=readme)
-* [MessagePack deserialization](https://arduinojson.org/v6/api/msgpack/deserializemsgpack/?utm_source=github&utm_medium=readme)
+* [JSON serialization](https://arduinojson.org/v7/api/json/serializejson/)
+    * [Can write to a buffer or a stream](https://arduinojson.org/v7/api/json/serializejson/)
+    * [Optionally indents the document (prettified JSON)](https://arduinojson.org/v7/api/json/serializejsonpretty/)
+* [MessagePack serialization](https://arduinojson.org/v7/api/msgpack/serializemsgpack/)
+* [MessagePack deserialization](https://arduinojson.org/v7/api/msgpack/deserializemsgpack/)
 * Efficient
-    * [Twice smaller than the "official" Arduino_JSON library](https://arduinojson.org/2019/11/19/arduinojson-vs-arduino_json/?utm_source=github&utm_medium=readme)
-    * [Almost 10% faster than the "official" Arduino_JSON library](https://arduinojson.org/2019/11/19/arduinojson-vs-arduino_json/?utm_source=github&utm_medium=readme)
-    * [Consumes roughly 10% less RAM than the "official" Arduino_JSON library](https://arduinojson.org/2019/11/19/arduinojson-vs-arduino_json/?utm_source=github&utm_medium=readme)
-    * [Fixed memory allocation, no heap fragmentation](https://arduinojson.org/v6/api/jsondocument/?utm_source=github&utm_medium=readme)
-    * [Optionally works without heap memory (zero malloc)](https://arduinojson.org/v6/api/staticjsondocument/?utm_source=github&utm_medium=readme)
-    * [Deduplicates strings](https://arduinojson.org/news/2020/08/01/version-6-16-0/?utm_source=github&utm_medium=readme)
+    * [Twice smaller than the "official" Arduino_JSON library](https://arduinojson.org/2019/11/19/arduinojson-vs-arduino_json/)
+    * [Almost 10% faster than the "official" Arduino_JSON library](https://arduinojson.org/2019/11/19/arduinojson-vs-arduino_json/)
+    * [Consumes roughly 10% less RAM than the "official" Arduino_JSON library](https://arduinojson.org/2019/11/19/arduinojson-vs-arduino_json/)
+    * [Deduplicates strings](https://arduinojson.org/news/2020/08/01/version-6-16-0/)
 * Versatile
-    * Supports [custom allocators (to use external RAM chip, for example)](https://arduinojson.org/v6/how-to/use-external-ram-on-esp32/?utm_source=github&utm_medium=readme)
-    * Supports [`String`](https://arduinojson.org/v6/api/config/enable_arduino_string/?utm_source=github&utm_medium=readme), [`std::string`](https://arduinojson.org/v6/api/config/enable_std_string/?utm_source=github&utm_medium=readme), and [`std::string_view`](https://arduinojson.org/v6/api/config/enable_string_view/?utm_source=github&utm_medium=readme)
-    * Supports [`Stream`](https://arduinojson.org/v6/api/config/enable_arduino_stream/?utm_source=github&utm_medium=readme) and [`std::istream`/`std::ostream`](https://arduinojson.org/v6/api/config/enable_std_stream/?utm_source=github&utm_medium=readme)
-    * Supports [Flash strings](https://arduinojson.org/v6/api/config/enable_progmem/?utm_source=github&utm_medium=readme)
-    * Supports [custom readers](https://arduinojson.org/v6/api/json/deserializejson/?utm_source=github&utm_medium=readme#custom-reader) and [custom writers](https://arduinojson.org/v6/api/json/serializejson/?utm_source=github&utm_medium=readme#custom-writer)
-    * Supports [custom converters](https://arduinojson.org/news/2021/05/04/version-6-18-0/?utm_source=github&utm_medium=readme)
+    * Supports [custom allocators (to use external RAM chip, for example)](https://arduinojson.org/v7/how-to/use-external-ram-on-esp32/)
+    * Supports [`String`](https://arduinojson.org/v7/api/config/enable_arduino_string/), [`std::string`](https://arduinojson.org/v7/api/config/enable_std_string/), and [`std::string_view`](https://arduinojson.org/v7/api/config/enable_string_view/)
+    * Supports [`Stream`](https://arduinojson.org/v7/api/config/enable_arduino_stream/) and [`std::istream`/`std::ostream`](https://arduinojson.org/v7/api/config/enable_std_stream/)
+    * Supports [Flash strings](https://arduinojson.org/v7/api/config/enable_progmem/)
+    * Supports [custom readers](https://arduinojson.org/v7/api/json/deserializejson/#custom-reader) and [custom writers](https://arduinojson.org/v7/api/json/serializejson/#custom-writer)
+    * Supports [custom converters](https://arduinojson.org/news/2021/05/04/version-6-18-0/)
 * Portable
     * Usable on any C++ project (not limited to Arduino)
-    * Compatible with C++98, C++11, C++14 and C++17
+    * Compatible with C++11, C++14 and C++17
+    * Support for C++98/C++03 available on [ArduinoJson 6.20.x](https://github.com/bblanchon/ArduinoJson/tree/6.20.x)
     * Zero warnings with `-Wall -Wextra -pedantic` and `/W4`
     * [Header-only library](https://en.wikipedia.org/wiki/Header-only)
     * Works with virtually any board
@@ -69,36 +66,35 @@ ArduinoJson is a C++ JSON library for Arduino and IoT (Internet Of Things).
         * [Visual Micro](http://www.visualmicro.com/)
         * [Visual Studio](https://www.visualstudio.com/)
     * [Even works with online compilers like wandbox.org](https://wandbox.org/permlink/RlZSKy17DjJ6HcdN)
-    * [CMake friendly](https://arduinojson.org/v6/how-to/use-arduinojson-with-cmake/?utm_source=github&utm_medium=readme)
+    * [CMake friendly](https://arduinojson.org/v7/how-to/use-arduinojson-with-cmake/)
 * Well designed
-    * [Elegant API](http://arduinojson.org/v6/example/?utm_source=github&utm_medium=readme)
+    * [Elegant API](http://arduinojson.org/v7/example/)
     * [Thread-safe](https://en.wikipedia.org/wiki/Thread_safety)
     * Self-contained (no external dependency)
     * `const` friendly
-    * [`for` friendly](https://arduinojson.org/v6/api/jsonobject/begin_end/?utm_source=github&utm_medium=readme)
+    * [`for` friendly](https://arduinojson.org/v7/api/jsonobject/begin_end/)
     * [TMP friendly](https://en.wikipedia.org/wiki/Template_metaprogramming)
-    * Handles [integer overflows](https://arduinojson.org/v6/api/jsonvariant/as/?utm_source=github&utm_medium=readme#integer-overflows)
+    * Handles [integer overflows](https://arduinojson.org/v7/api/jsonvariant/as/#integer-overflows)
 * Well tested
-    * [Unit test coverage close to 100%](https://coveralls.io/github/bblanchon/ArduinoJson?branch=6.x)
+    * [Unit test coverage close to 100%](https://coveralls.io/github/bblanchon/ArduinoJson?branch=7.x)
     * Continuously tested on
-        * [Visual Studio 2010, 2012, 2013, 2015, 2017, 2019, 2022](https://ci.appveyor.com/project/bblanchon/arduinojson/branch/6.x)
-        * [GCC 4.4, 4.6, 4.7, 4.8, 4.9, 5, 6, 7, 8, 9, 10, 11](https://github.com/bblanchon/ArduinoJson/actions?query=workflow%3A%22Continuous+Integration%22)
-        * [Clang 3.5, 3.6, 3.7, 3.8, 3.9, 4.0, 5.0, 6.0, 7, 8, 9, 10](https://github.com/bblanchon/ArduinoJson/actions?query=workflow%3A%22Continuous+Integration%22)
+        * [Visual Studio 2017, 2019, 2022](https://ci.appveyor.com/project/bblanchon/arduinojson/branch/7.x)
+        * [GCC 4.8, 5, 6, 7, 8, 9, 10, 11, 12](https://github.com/bblanchon/ArduinoJson/actions?query=workflow%3A%22Continuous+Integration%22)
+        * [Clang 7 to 19](https://github.com/bblanchon/ArduinoJson/actions?query=workflow%3A%22Continuous+Integration%22)
     * [Continuously fuzzed with Google OSS Fuzz](https://bugs.chromium.org/p/oss-fuzz/issues/list?sort=-opened&can=1&q=proj:arduinojson)
     * Passes all default checks of [clang-tidy](https://releases.llvm.org/10.0.0/tools/clang/tools/extra/docs/clang-tidy/)
 * Well documented
-    * [Tutorials](https://arduinojson.org/v6/doc/deserialization/?utm_source=github&utm_medium=readme)
-    * [Examples](https://arduinojson.org/v6/example/?utm_source=github&utm_medium=readme)
-    * [How-tos](https://arduinojson.org/v6/example/?utm_source=github&utm_medium=readme)
-    * [FAQ](https://arduinojson.org/v6/faq/?utm_source=github&utm_medium=readme)
-    * [Troubleshooter](https://arduinojson.org/v6/troubleshooter/?utm_source=github&utm_medium=readme)
-    * [Book](https://arduinojson.org/book/?utm_source=github&utm_medium=readme)
+    * [Tutorials](https://arduinojson.org/v7/doc/deserialization/)
+    * [Examples](https://arduinojson.org/v7/example/)
+    * [How-tos](https://arduinojson.org/v7/example/)
+    * [FAQ](https://arduinojson.org/v7/faq/)
+    * [Troubleshooter](https://arduinojson.org/v7/troubleshooter/)
+    * [Book](https://arduinojson.org/book/)
     * [Changelog](CHANGELOG.md)
 * Vibrant user community
     * Most popular of all Arduino libraries on [GitHub](https://github.com/search?o=desc&q=arduino+library&s=stars&type=Repositories)
     * [Used in hundreds of projects](https://www.hackster.io/search?i=projects&q=arduinojson)
     * [Responsive support](https://github.com/bblanchon/ArduinoJson/issues?q=is%3Aissue+is%3Aclosed)
-    * [Discord server](https://discord.gg/DzN6hHHD4h)
 
 ## Quickstart
 
@@ -107,9 +103,9 @@ ArduinoJson is a C++ JSON library for Arduino and IoT (Internet Of Things).
 Here is a program that parses a JSON document with ArduinoJson.
 
 ```c++
-char json[] = "{\"sensor\":\"gps\",\"time\":1351824120,\"data\":[48.756080,2.302038]}";
+const char* json = "{\"sensor\":\"gps\",\"time\":1351824120,\"data\":[48.756080,2.302038]}";
 
-DynamicJsonDocument doc(1024);
+JsonDocument doc;
 deserializeJson(doc, json);
 
 const char* sensor = doc["sensor"];
@@ -118,14 +114,14 @@ double latitude    = doc["data"][0];
 double longitude   = doc["data"][1];
 ```
 
-See the [tutorial on arduinojson.org](https://arduinojson.org/doc/decoding/?utm_source=github&utm_medium=readme)
+See the [tutorial on arduinojson.org](https://arduinojson.org/v7/doc/deserialization/)
 
 ### Serialization
 
 Here is a program that generates a JSON document with ArduinoJson:
 
 ```c++
-DynamicJsonDocument doc(1024);
+JsonDocument doc;
 
 doc["sensor"] = "gps";
 doc["time"]   = 1351824120;
@@ -137,16 +133,13 @@ serializeJson(doc, Serial);
 // {"sensor":"gps","time":1351824120,"data":[48.756080,2.302038]}
 ```
 
-See the [tutorial on arduinojson.org](https://arduinojson.org/doc/encoding/?utm_source=github&utm_medium=readme)
+See the [tutorial on arduinojson.org](https://arduinojson.org/v7/doc/serialization/)
 
 ## Sponsors
 
 ArduinoJson is thankful to its sponsors. Please give them a visit; they deserve it!
 
 <p>
-  <a href="https://techexplorations.com/" rel="sponsored">
-    <img alt="Tech Explorations" src="https://arduinojson.org/images/2021/10/techexplorations.png" width="200">
-  </a>
   <a href="https://www.programmingelectronics.com/" rel="sponsored">
     <img src="https://arduinojson.org/images/2021/10/programmingeleactronicsacademy.png" alt="Programming Electronics Academy" width="200">
   </a>
@@ -155,6 +148,9 @@ ArduinoJson is thankful to its sponsors. Please give them a visit; they deserve
   <a href="https://github.com/1technophile" rel="sponsored">
     <img alt="1technophile" src="https://avatars.githubusercontent.com/u/12672732?s=40&v=4">
   </a>
+  <a href="https://github.com/LArkema" rel="sponsored">
+    <img alt="LArkema" src="https://avatars.githubusercontent.com/u/38381313?s=40&v=4">
+  </a>
 </p>
 
 If you run a commercial project that embeds ArduinoJson, think about [sponsoring the library's development](https://github.com/sponsors/bblanchon): it ensures the code that your products rely on stays actively maintained. It can also give your project some exposure to the makers' community.

appveyor.yml

@@ -1,4 +1,4 @@
-version: 6.19.3.{build}
+version: 7.4.1.{build}
 environment:
   matrix:
     - APPVEYOR_BUILD_WORKER_IMAGE: Visual Studio 2022
@@ -7,15 +7,6 @@ environment:
       CMAKE_GENERATOR: Visual Studio 16 2019
     - APPVEYOR_BUILD_WORKER_IMAGE: Visual Studio 2017
       CMAKE_GENERATOR: Visual Studio 15 2017
-    - APPVEYOR_BUILD_WORKER_IMAGE: Visual Studio 2015
-      CMAKE_GENERATOR: Visual Studio 14 2015
-    - CMAKE_GENERATOR: Visual Studio 12 2013
-    - CMAKE_GENERATOR: Visual Studio 11 2012
-    - CMAKE_GENERATOR: Visual Studio 10 2010
-    - CMAKE_GENERATOR: Ninja
-      MINGW: MinGW # MinGW 32-bit 5.3.0
-    - CMAKE_GENERATOR: Ninja
-      MINGW32: i686-5.3.0-posix-dwarf-rt_v4-rev0 # MinGW-w64 5.3.0
     - CMAKE_GENERATOR: Ninja
       MINGW32: i686-6.3.0-posix-dwarf-rt_v5-rev1 # MinGW-w64 6.3.0 i686
     - CMAKE_GENERATOR: Ninja

examples/JsonConfigFile/JsonConfigFile.ino

@@ -1,5 +1,5 @@
 // ArduinoJson - https://arduinojson.org
-// Copyright © 2014-2022, Benoit BLANCHON
+// Copyright © 2014-2025, Benoit BLANCHON
 // MIT License
 //
 // This example shows how to store your project configuration in a file.
@@ -17,35 +17,28 @@
 // * CLK  <-> pin 13
 // * CS   <-> pin 4
 //
-// https://arduinojson.org/v6/example/config/
+// https://arduinojson.org/v7/example/config/
 
 #include <ArduinoJson.h>
 #include <SD.h>
 #include <SPI.h>
 
 // Our configuration structure.
-//
-// Never use a JsonDocument to store the configuration!
-// A JsonDocument is *not* a permanent storage; it's only a temporary storage
-// used during the serialization phase. See:
-// https://arduinojson.org/v6/faq/why-must-i-create-a-separate-config-object/
 struct Config {
   char hostname[64];
   int port;
 };
 
-const char *filename = "/config.txt";  // <- SD library uses 8.3 filenames
+const char* filename = "/config.txt";  // <- SD library uses 8.3 filenames
 Config config;                         // <- global configuration object
 
 // Loads the configuration from a file
-void loadConfiguration(const char *filename, Config &config) {
+void loadConfiguration(const char* filename, Config& config) {
   // Open file for reading
   File file = SD.open(filename);
 
   // Allocate a temporary JsonDocument
-  // Don't forget to change the capacity to match your requirements.
-  // Use https://arduinojson.org/v6/assistant to compute the capacity.
-  StaticJsonDocument<512> doc;
+  JsonDocument doc;
 
   // Deserialize the JSON document
   DeserializationError error = deserializeJson(doc, file);
@@ -63,7 +56,7 @@ void loadConfiguration(const char *filename, Config &config) {
 }
 
 // Saves the configuration to a file
-void saveConfiguration(const char *filename, const Config &config) {
+void saveConfiguration(const char* filename, const Config& config) {
   // Delete existing file, otherwise the configuration is appended to the file
   SD.remove(filename);
 
@@ -75,9 +68,7 @@ void saveConfiguration(const char *filename, const Config &config) {
   }
 
   // Allocate a temporary JsonDocument
-  // Don't forget to change the capacity to match your requirements.
-  // Use https://arduinojson.org/assistant to compute the capacity.
-  StaticJsonDocument<256> doc;
+  JsonDocument doc;
 
   // Set the values in the document
   doc["hostname"] = config.hostname;
@@ -93,7 +84,7 @@ void saveConfiguration(const char *filename, const Config &config) {
 }
 
 // Prints the content of a file to the Serial
-void printFile(const char *filename) {
+void printFile(const char* filename) {
   // Open file for reading
   File file = SD.open(filename);
   if (!file) {
@@ -114,7 +105,8 @@ void printFile(const char *filename) {
 void setup() {
   // Initialize serial port
   Serial.begin(9600);
-  while (!Serial) continue;
+  while (!Serial)
+    continue;
 
   // Initialize SD library
   const int chipSelect = 4;
@@ -144,7 +136,7 @@ void loop() {
 // ------------------
 //
 // File is an unbuffered stream, which is not optimal for ArduinoJson.
-// See: https://arduinojson.org/v6/how-to/improve-speed/
+// See: https://arduinojson.org/v7/how-to/improve-speed/
 
 // See also
 // --------

examples/JsonFilterExample/JsonFilterExample.ino

@@ -1,20 +1,21 @@
 // ArduinoJson - https://arduinojson.org
-// Copyright © 2014-2022, Benoit BLANCHON
+// Copyright © 2014-2025, Benoit BLANCHON
 // MIT License
 //
-// This example shows how to use DeserializationOpion::Filter
+// This example shows how to use DeserializationOption::Filter
 //
-// https://arduinojson.org/v6/example/filter/
+// https://arduinojson.org/v7/example/filter/
 
 #include <ArduinoJson.h>
 
 void setup() {
   // Initialize serial port
   Serial.begin(9600);
-  while (!Serial) continue;
+  while (!Serial)
+    continue;
 
   // The huge input: an extract from OpenWeatherMap response
-  const __FlashStringHelper* input_json = F(
+  auto input_json = F(
       "{\"cod\":\"200\",\"message\":0,\"list\":[{\"dt\":1581498000,\"main\":{"
       "\"temp\":3.23,\"feels_like\":-3.63,\"temp_min\":3.23,\"temp_max\":4.62,"
       "\"pressure\":1014,\"sea_level\":1014,\"grnd_level\":1010,\"humidity\":"
@@ -33,12 +34,12 @@ void setup() {
       "1000000,\"timezone\":0,\"sunrise\":1581492085,\"sunset\":1581527294}}");
 
   // The filter: it contains "true" for each value we want to keep
-  StaticJsonDocument<200> filter;
+  JsonDocument filter;
   filter["list"][0]["dt"] = true;
   filter["list"][0]["main"]["temp"] = true;
 
   // Deserialize the document
-  StaticJsonDocument<400> doc;
+  JsonDocument doc;
   deserializeJson(doc, input_json, DeserializationOption::Filter(filter));
 
   // Print the result

examples/JsonGeneratorExample/JsonGeneratorExample.ino

@@ -1,43 +1,32 @@
 // ArduinoJson - https://arduinojson.org
-// Copyright © 2014-2022, Benoit BLANCHON
+// Copyright © 2014-2025, Benoit BLANCHON
 // MIT License
 //
 // This example shows how to generate a JSON document with ArduinoJson.
 //
-// https://arduinojson.org/v6/example/generator/
+// https://arduinojson.org/v7/example/generator/
 
 #include <ArduinoJson.h>
 
 void setup() {
   // Initialize Serial port
   Serial.begin(9600);
-  while (!Serial) continue;
+  while (!Serial)
+    continue;
 
   // Allocate the JSON document
-  //
-  // Inside the brackets, 200 is the RAM allocated to this document.
-  // Don't forget to change this value to match your requirement.
-  // Use https://arduinojson.org/v6/assistant to compute the capacity.
-  StaticJsonDocument<200> doc;
-
-  // StaticJsonObject allocates memory on the stack, it can be
-  // replaced by DynamicJsonDocument which allocates in the heap.
-  //
-  // DynamicJsonDocument  doc(200);
+  JsonDocument doc;
 
   // Add values in the document
-  //
   doc["sensor"] = "gps";
   doc["time"] = 1351824120;
 
-  // Add an array.
-  //
-  JsonArray data = doc.createNestedArray("data");
+  // Add an array
+  JsonArray data = doc["data"].to<JsonArray>();
   data.add(48.756080);
   data.add(2.302038);
 
-  // Generate the minified JSON and send it to the Serial port.
-  //
+  // Generate the minified JSON and send it to the Serial port
   serializeJson(doc, Serial);
   // The above line prints:
   // {"sensor":"gps","time":1351824120,"data":[48.756080,2.302038]}
@@ -45,8 +34,7 @@ void setup() {
   // Start a new line
   Serial.println();
 
-  // Generate the prettified JSON and send it to the Serial port.
-  //
+  // Generate the prettified JSON and send it to the Serial port
   serializeJsonPretty(doc, Serial);
   // The above line prints:
   // {

examples/JsonHttpClient/JsonHttpClient.ino

@@ -1,5 +1,5 @@
 // ArduinoJson - https://arduinojson.org
-// Copyright © 2014-2022, Benoit BLANCHON
+// Copyright © 2014-2025, Benoit BLANCHON
 // MIT License
 //
 // This example shows how to parse a JSON document in an HTTP response.
@@ -16,7 +16,7 @@
 //   ]
 // }
 //
-// https://arduinojson.org/v6/example/http-client/
+// https://arduinojson.org/v7/example/http-client/
 
 #include <ArduinoJson.h>
 #include <Ethernet.h>
@@ -25,7 +25,8 @@
 void setup() {
   // Initialize Serial port
   Serial.begin(9600);
-  while (!Serial) continue;
+  while (!Serial)
+    continue;
 
   // Initialize Ethernet library
   byte mac[] = {0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED};
@@ -77,9 +78,7 @@ void setup() {
   }
 
   // Allocate the JSON document
-  // Use https://arduinojson.org/v6/assistant to compute the capacity.
-  const size_t capacity = JSON_OBJECT_SIZE(3) + JSON_ARRAY_SIZE(2) + 60;
-  DynamicJsonDocument doc(capacity);
+  JsonDocument doc;
 
   // Parse JSON object
   DeserializationError error = deserializeJson(doc, client);
@@ -109,7 +108,7 @@ void loop() {
 // ------------------
 //
 // EthernetClient is an unbuffered stream, which is not optimal for ArduinoJson.
-// See: https://arduinojson.org/v6/how-to/improve-speed/
+// See: https://arduinojson.org/v7/how-to/improve-speed/
 
 // See also
 // --------

examples/JsonParserExample/JsonParserExample.ino

@@ -1,52 +1,37 @@
 // ArduinoJson - https://arduinojson.org
-// Copyright © 2014-2022, Benoit BLANCHON
+// Copyright © 2014-2025, Benoit BLANCHON
 // MIT License
 //
 // This example shows how to deserialize a JSON document with ArduinoJson.
 //
-// https://arduinojson.org/v6/example/parser/
+// https://arduinojson.org/v7/example/parser/
 
 #include <ArduinoJson.h>
 
 void setup() {
   // Initialize serial port
   Serial.begin(9600);
-  while (!Serial) continue;
+  while (!Serial)
+    continue;
 
   // Allocate the JSON document
-  //
-  // Inside the brackets, 200 is the capacity of the memory pool in bytes.
-  // Don't forget to change this value to match your JSON document.
-  // Use https://arduinojson.org/v6/assistant to compute the capacity.
-  StaticJsonDocument<200> doc;
-
-  // StaticJsonDocument<N> allocates memory on the stack, it can be
-  // replaced by DynamicJsonDocument which allocates in the heap.
-  //
-  // DynamicJsonDocument doc(200);
+  JsonDocument doc;
 
   // JSON input string.
-  //
-  // Using a char[], as shown here, enables the "zero-copy" mode. This mode uses
-  // the minimal amount of memory because the JsonDocument stores pointers to
-  // the input buffer.
-  // If you use another type of input, ArduinoJson must copy the strings from
-  // the input to the JsonDocument, so you need to increase the capacity of the
-  // JsonDocument.
-  char json[] =
+  const char* json =
       "{\"sensor\":\"gps\",\"time\":1351824120,\"data\":[48.756080,2.302038]}";
 
   // Deserialize the JSON document
   DeserializationError error = deserializeJson(doc, json);
 
-  // Test if parsing succeeds.
+  // Test if parsing succeeds
   if (error) {
     Serial.print(F("deserializeJson() failed: "));
     Serial.println(error.f_str());
     return;
   }
 
-  // Fetch values.
+  // Fetch the values
   //
   // Most of the time, you can rely on the implicit casts.
   // In other case, you can do doc["time"].as<long>();
@@ -55,7 +40,7 @@ void setup() {
   double latitude = doc["data"][0];
   double longitude = doc["data"][1];
 
-  // Print values.
+  // Print the values
   Serial.println(sensor);
   Serial.println(time);
   Serial.println(latitude, 6);

examples/JsonServer/JsonServer.ino

@@ -1,5 +1,5 @@
 // ArduinoJson - https://arduinojson.org
-// Copyright © 2014-2022, Benoit BLANCHON
+// Copyright © 2014-2025, Benoit BLANCHON
 // MIT License
 //
 // This example shows how to implement an HTTP server that sends a JSON document
@@ -13,7 +13,7 @@
 //   "digital": [1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 0]
 // }
 //
-// https://arduinojson.org/v6/example/http-server/
+// https://arduinojson.org/v7/example/http-server/
 
 #include <ArduinoJson.h>
 #include <Ethernet.h>
@@ -25,7 +25,8 @@ EthernetServer server(80);
 void setup() {
   // Initialize serial port
   Serial.begin(9600);
-  while (!Serial) continue;
+  while (!Serial)
+    continue;
 
   // Initialize Ethernet libary
   if (!Ethernet.begin(mac)) {
@@ -52,14 +53,14 @@ void loop() {
   Serial.println(F("New client"));
 
   // Read the request (we ignore the content in this example)
-  while (client.available()) client.read();
+  while (client.available())
+    client.read();
 
   // Allocate a temporary JsonDocument
-  // Use https://arduinojson.org/v6/assistant to compute the capacity.
-  StaticJsonDocument<500> doc;
+  JsonDocument doc;
 
   // Create the "analog" array
-  JsonArray analogValues = doc.createNestedArray("analog");
+  JsonArray analogValues = doc["analog"].to<JsonArray>();
   for (int pin = 0; pin < 6; pin++) {
     // Read the analog input
     int value = analogRead(pin);
@@ -69,7 +70,7 @@ void loop() {
   }
 
   // Create the "digital" array
-  JsonArray digitalValues = doc.createNestedArray("digital");
+  JsonArray digitalValues = doc["digital"].to<JsonArray>();
   for (int pin = 0; pin < 14; pin++) {
     // Read the digital input
     int value = digitalRead(pin);
@@ -101,7 +102,7 @@ void loop() {
 // ------------------
 //
 // EthernetClient is an unbuffered stream, which is not optimal for ArduinoJson.
-// See: https://arduinojson.org/v6/how-to/improve-speed/
+// See: https://arduinojson.org/v7/how-to/improve-speed/
 
 // See also
 // --------

examples/JsonUdpBeacon/JsonUdpBeacon.ino

@@ -1,5 +1,5 @@
 // ArduinoJson - https://arduinojson.org
-// Copyright © 2014-2022, Benoit BLANCHON
+// Copyright © 2014-2025, Benoit BLANCHON
 // MIT License
 //
 // This example shows how to send a JSON document to a UDP socket.
@@ -17,7 +17,7 @@
 // $ ncat -ulp 8888
 // See https://nmap.org/ncat/
 //
-// https://arduinojson.org/v6/example/udp-beacon/
+// https://arduinojson.org/v7/example/udp-beacon/
 
 #include <ArduinoJson.h>
 #include <Ethernet.h>
@@ -32,7 +32,8 @@ EthernetUDP udp;
 void setup() {
   // Initialize serial port
   Serial.begin(9600);
-  while (!Serial) continue;
+  while (!Serial)
+    continue;
 
   // Initialize Ethernet libary
   if (!Ethernet.begin(mac)) {
@@ -46,11 +47,10 @@ void setup() {
 
 void loop() {
   // Allocate a temporary JsonDocument
-  // Use https://arduinojson.org/v6/assistant to compute the capacity.
-  StaticJsonDocument<500> doc;
+  JsonDocument doc;
 
   // Create the "analog" array
-  JsonArray analogValues = doc.createNestedArray("analog");
+  JsonArray analogValues = doc["analog"].to<JsonArray>();
   for (int pin = 0; pin < 6; pin++) {
     // Read the analog input
     int value = analogRead(pin);
@@ -60,7 +60,7 @@ void loop() {
   }
 
   // Create the "digital" array
-  JsonArray digitalValues = doc.createNestedArray("digital");
+  JsonArray digitalValues = doc["digital"].to<JsonArray>();
   for (int pin = 0; pin < 14; pin++) {
     // Read the digital input
     int value = digitalRead(pin);
@@ -90,7 +90,7 @@ void loop() {
 // ------------------
 //
 // EthernetUDP is an unbuffered stream, which is not optimal for ArduinoJson.
-// See: https://arduinojson.org/v6/how-to/improve-speed/
+// See: https://arduinojson.org/v7/how-to/improve-speed/
 
 // See also
 // --------

examples/MsgPackParser/MsgPackParser.ino

@@ -1,39 +1,24 @@
 // ArduinoJson - https://arduinojson.org
-// Copyright © 2014-2022, Benoit BLANCHON
+// Copyright © 2014-2025, Benoit BLANCHON
 // MIT License
 //
 // This example shows how to deserialize a MessagePack document with
 // ArduinoJson.
 //
-// https://arduinojson.org/v6/example/msgpack-parser/
+// https://arduinojson.org/v7/example/msgpack-parser/
 
 #include <ArduinoJson.h>
 
 void setup() {
   // Initialize serial port
   Serial.begin(9600);
-  while (!Serial) continue;
+  while (!Serial)
+    continue;
 
   // Allocate the JSON document
-  //
-  // Inside the brackets, 200 is the capacity of the memory pool in bytes.
-  // Don't forget to change this value to match your JSON document.
-  // Use https://arduinojson.org/v6/assistant to compute the capacity.
-  StaticJsonDocument<200> doc;
+  JsonDocument doc;
 
-  // StaticJsonObject allocates memory on the stack, it can be
-  // replaced by DynamicJsonObject which allocates in the heap.
-  //
-  // DynamicJsonObject doc(200);
-
-  // MessagePack input string.
-  //
-  // Using a char[], as shown here, enables the "zero-copy" mode. This mode uses
-  // the minimal amount of memory because the JsonDocument stores pointers to
-  // the input buffer.
-  // If you use another type of input, ArduinoJson must copy the strings from
-  // the input to the JsonDocument, so you need to increase the capacity of the
-  // JsonDocument.
+  // The MessagePack input string
   uint8_t input[] = {131, 166, 115, 101, 110, 115, 111, 114, 163, 103, 112, 115,
                      164, 116, 105, 109, 101, 206, 80,  147, 50,  248, 164, 100,
                      97,  116, 97,  146, 203, 64,  72,  96,  199, 58,  188, 148,
@@ -45,16 +30,17 @@ void setup() {
   //   "data": [48.75608, 2.302038]
   // }
 
+  // Parse the input
   DeserializationError error = deserializeMsgPack(doc, input);
 
-  // Test if parsing succeeded.
+  // Test if parsing succeeded
   if (error) {
     Serial.print("deserializeMsgPack() failed: ");
     Serial.println(error.f_str());
     return;
   }
 
-  // Fetch values.
+  // Fetch the values
   //
   // Most of the time, you can rely on the implicit casts.
   // In other case, you can do doc["time"].as<long>();
@@ -63,7 +49,7 @@ void setup() {
   double latitude = doc["data"][0];
   double longitude = doc["data"][1];
 
-  // Print values.
+  // Print the values
   Serial.println(sensor);
   Serial.println(time);
   Serial.println(latitude, 6);

examples/ProgmemExample/ProgmemExample.ino

@@ -1,5 +1,5 @@
 // ArduinoJson - https://arduinojson.org
-// Copyright © 2014-2022, Benoit BLANCHON
+// Copyright © 2014-2025, Benoit BLANCHON
 // MIT License
 //
 // This example shows the different ways you can use Flash strings with
@@ -9,39 +9,38 @@
 // JsonDocument. Prefer plain old char*, as they are more efficient in term of
 // code size, speed, and memory usage.
 //
-// https://arduinojson.org/v6/example/progmem/
+// https://arduinojson.org/v7/example/progmem/
 
 #include <ArduinoJson.h>
 
 void setup() {
-  DynamicJsonDocument doc(1024);
+  JsonDocument doc;
 
   // You can use a Flash String as your JSON input.
   // WARNING: the strings in the input will be duplicated in the JsonDocument.
   deserializeJson(doc, F("{\"sensor\":\"gps\",\"time\":1351824120,"
                          "\"data\":[48.756080,2.302038]}"));
-  JsonObject obj = doc.as<JsonObject>();
 
-  // You can use a Flash String to get an element of a JsonObject
+  // You can use a Flash String as a key to get a member from JsonDocument
   // No duplication is done.
-  long time = obj[F("time")];
+  long time = doc[F("time")];
 
-  // You can use a Flash String to set an element of a JsonObject
+  // You can use a Flash String as a key to set a member of a JsonDocument
   // WARNING: the content of the Flash String will be duplicated in the
   // JsonDocument.
-  obj[F("time")] = time;
+  doc[F("time")] = time;
 
-  // You can set a Flash String to a JsonObject or JsonArray:
+  // You can set a Flash String as the content of a JsonVariant
   // WARNING: the content of the Flash String will be duplicated in the
   // JsonDocument.
-  obj["sensor"] = F("gps");
+  doc["sensor"] = F("gps");
 
   // It works with serialized() too:
-  obj["sensor"] = serialized(F("\"gps\""));
-  obj["sensor"] = serialized(F("\xA3gps"), 3);
+  doc["sensor"] = serialized(F("\"gps\""));
+  doc["sensor"] = serialized(F("\xA3gps"), 3);
 
   // You can compare the content of a JsonVariant to a Flash String
-  if (obj["sensor"] == F("gps")) {
+  if (doc["sensor"] == F("gps")) {
     // ...
   }
 }

examples/StringExample/StringExample.ino

@@ -1,5 +1,5 @@
 // ArduinoJson - https://arduinojson.org
-// Copyright © 2014-2022, Benoit BLANCHON
+// Copyright © 2014-2025, Benoit BLANCHON
 // MIT License
 //
 // This example shows the different ways you can use String with ArduinoJson.
@@ -8,50 +8,49 @@
 // JsonDocument. Prefer plain old char[], as they are more efficient in term of
 // code size, speed, and memory usage.
 //
-// https://arduinojson.org/v6/example/string/
+// https://arduinojson.org/v7/example/string/
 
 #include <ArduinoJson.h>
 
 void setup() {
-  DynamicJsonDocument doc(1024);
+  JsonDocument doc;
 
   // You can use a String as your JSON input.
   // WARNING: the string in the input  will be duplicated in the JsonDocument.
   String input =
       "{\"sensor\":\"gps\",\"time\":1351824120,\"data\":[48.756080,2.302038]}";
   deserializeJson(doc, input);
-  JsonObject obj = doc.as<JsonObject>();
 
-  // You can use a String to get an element of a JsonObject
+  // You can use a String as a key to get a member from JsonDocument
   // No duplication is done.
-  long time = obj[String("time")];
+  long time = doc[String("time")];
 
-  // You can use a String to set an element of a JsonObject
+  // You can use a String as a key to set a member of a JsonDocument
   // WARNING: the content of the String will be duplicated in the JsonDocument.
-  obj[String("time")] = time;
+  doc[String("time")] = time;
 
-  // You can get a String from a JsonObject or JsonArray:
+  // You can get the content of a JsonVariant as a String
   // No duplication is done, at least not in the JsonDocument.
-  String sensor = obj["sensor"];
+  String sensor = doc["sensor"];
 
   // Unfortunately, the following doesn't work (issue #118):
-  // sensor = obj["sensor"]; // <-  error "ambiguous overload for 'operator='"
+  // sensor = doc["sensor"]; // <-  error "ambiguous overload for 'operator='"
   // As a workaround, you need to replace by:
-  sensor = obj["sensor"].as<String>();
+  sensor = doc["sensor"].as<String>();
 
-  // You can set a String to a JsonObject or JsonArray:
+  // You can set a String as the content of a JsonVariant
   // WARNING: the content of the String will be duplicated in the JsonDocument.
-  obj["sensor"] = sensor;
+  doc["sensor"] = sensor;
 
   // It works with serialized() too:
-  obj["sensor"] = serialized(sensor);
+  doc["sensor"] = serialized(sensor);
 
   // You can also concatenate strings
   // WARNING: the content of the String will be duplicated in the JsonDocument.
-  obj[String("sen") + "sor"] = String("gp") + "s";
+  doc[String("sen") + "sor"] = String("gp") + "s";
 
   // You can compare the content of a JsonObject with a String
-  if (obj["sensor"] == sensor) {
+  if (doc["sensor"] == sensor) {
     // ...
   }
 

extras/CompileOptions.cmake

@@ -1,3 +1,7 @@
+if(NOT DEFINED COVERAGE)
+	set(COVERAGE OFF)
+endif()
+
 if(CMAKE_CXX_COMPILER_ID MATCHES "(GNU|Clang)")
 	add_compile_options(
 		-pedantic
@@ -27,14 +31,23 @@ if(CMAKE_CXX_COMPILER_ID MATCHES "(GNU|Clang)")
 	if(${COVERAGE})
 		set(CMAKE_CXX_FLAGS "-fprofile-arcs -ftest-coverage")
 	endif()
-
 endif()
 
-if(CMAKE_CXX_COMPILER_ID STREQUAL  "GNU")
-	if((CMAKE_CXX_COMPILER_VERSION VERSION_GREATER 4.8) AND (NOT ${COVERAGE}))
+if(CMAKE_CXX_COMPILER_ID STREQUAL "GNU")
+	if((CMAKE_CXX_COMPILER_VERSION VERSION_GREATER 4.9) AND(NOT ${COVERAGE}))
 		add_compile_options(-g -Og)
-	else()
-		add_compile_options(-g -O0)
+	else() # GCC 4.8
+		add_compile_options(
+			-g
+			-O0 # GCC 4.8 doesn't support -Og
+			-Wno-shadow  # allow the same name for a function parameter and a member functions
+			-Wp,-w  # Disable preprocessing warnings (see below)
+		)
+		# GCC 4.8 doesn't support __has_include, so we need to help him
+		add_definitions(
+			-DARDUINOJSON_ENABLE_STD_STRING=1
+			-DARDUINOJSON_ENABLE_STD_STREAM=1
+		)
 	endif()
 
 	add_compile_options(
@@ -65,7 +78,10 @@ if(CMAKE_CXX_COMPILER_ID MATCHES "Clang")
 endif()
 
 if(CMAKE_CXX_COMPILER_ID STREQUAL "Clang")
-	if((CMAKE_CXX_COMPILER_VERSION VERSION_GREATER 4.0) AND (NOT ${COVERAGE}))
+	add_compile_options(-stdlib=libc++)
+	link_libraries(c++ m)
+
+	if((CMAKE_CXX_COMPILER_VERSION VERSION_GREATER 4.0) AND(NOT ${COVERAGE}))
 		add_compile_options(-g -Og)
 	else()
 		add_compile_options(-g -O0)
@@ -73,7 +89,7 @@ if(CMAKE_CXX_COMPILER_ID STREQUAL "Clang")
 endif()
 
 if(CMAKE_CXX_COMPILER_ID STREQUAL "AppleClang")
-	if((CMAKE_CXX_COMPILER_VERSION VERSION_GREATER 9.0) AND (NOT ${COVERAGE}))
+	if((CMAKE_CXX_COMPILER_VERSION VERSION_GREATER 9.0) AND(NOT ${COVERAGE}))
 		add_compile_options(-g -Og)
 	else()
 		add_compile_options(-g -O0)
@@ -85,17 +101,12 @@ if(MSVC)
 	add_compile_options(
 		/W4 # Set warning level
 		/WX # Treats all compiler warnings as errors.
+		/Zc:__cplusplus # Enable updated __cplusplus macro
 	)
-
-	if (NOT MSVC_VERSION LESS  1910) #  >= Visual Studio 2017
-		add_compile_options(
-			/Zc:__cplusplus  # Enable updated __cplusplus macro
-		)
-	endif()
 endif()
 
 if(MINGW)
-  # Static link on MinGW to avoid linking with the wrong DLLs when multiple
+	# Static link on MinGW to avoid linking with the wrong DLLs when multiple
 	# versions are installed.
 	add_link_options(-static)
 endif()

extras/ci/espidf/CMakeLists.txt

@@ -1,5 +1,5 @@
 # ArduinoJson - https://arduinojson.org
-# Copyright © 2014-2022, Benoit BLANCHON
+# Copyright © 2014-2025, Benoit BLANCHON
 # MIT License
 
 cmake_minimum_required(VERSION 3.5)

extras/ci/espidf/main/CMakeLists.txt

@@ -1,6 +1,8 @@
 # ArduinoJson - https://arduinojson.org
-# Copyright © 2014-2022, Benoit BLANCHON
+# Copyright © 2014-2025, Benoit BLANCHON
 # MIT License
 
-idf_component_register(SRCS "main.cpp"
-                       INCLUDE_DIRS "")
+idf_component_register(
+	SRCS "main.cpp"
+	INCLUDE_DIRS ""
+)

extras/ci/espidf/main/main.cpp

@@ -1,12 +1,12 @@
 // ArduinoJson - https://arduinojson.org
-// Copyright © 2014-2022, Benoit BLANCHON
+// Copyright © 2014-2025, Benoit BLANCHON
 // MIT License
 
 #include <ArduinoJson.h>
 
 extern "C" void app_main() {
   char buffer[256];
-  StaticJsonDocument<200> doc;
+  JsonDocument doc;
 
   doc["hello"] = "world";
   serializeJson(doc, buffer);

extras/conf_test/avr.cpp

@@ -1,16 +1,18 @@
 #include <ArduinoJson.h>
 
+static_assert(ARDUINOJSON_ENABLE_PROGMEM == 1, "ARDUINOJSON_ENABLE_PROGMEM");
+
 static_assert(ARDUINOJSON_USE_LONG_LONG == 0, "ARDUINOJSON_USE_LONG_LONG");
 
-static_assert(ARDUINOJSON_SLOT_OFFSET_SIZE == 1,
-              "ARDUINOJSON_SLOT_OFFSET_SIZE");
+static_assert(ARDUINOJSON_SLOT_ID_SIZE == 1, "ARDUINOJSON_SLOT_ID_SIZE");
+
+static_assert(ARDUINOJSON_POOL_CAPACITY == 16, "ARDUINOJSON_POOL_CAPACITY");
 
 static_assert(ARDUINOJSON_LITTLE_ENDIAN == 1, "ARDUINOJSON_LITTLE_ENDIAN");
 
-static_assert(ARDUINOJSON_USE_DOUBLE == 1, "ARDUINOJSON_USE_DOUBLE");
+static_assert(ARDUINOJSON_USE_DOUBLE == 0, "ARDUINOJSON_USE_DOUBLE");
 
-static_assert(sizeof(ARDUINOJSON_NAMESPACE::VariantSlot) == 8,
-              "sizeof(VariantSlot)");
+static_assert(sizeof(ArduinoJson::detail::VariantData) == 6, "slot size");
 
 void setup() {}
 void loop() {}

extras/conf_test/esp8266.cpp

@@ -2,15 +2,15 @@
 
 static_assert(ARDUINOJSON_USE_LONG_LONG == 1, "ARDUINOJSON_USE_LONG_LONG");
 
-static_assert(ARDUINOJSON_SLOT_OFFSET_SIZE == 2,
-              "ARDUINOJSON_SLOT_OFFSET_SIZE");
+static_assert(ARDUINOJSON_SLOT_ID_SIZE == 2, "ARDUINOJSON_SLOT_ID_SIZE");
+
+static_assert(ARDUINOJSON_POOL_CAPACITY == 128, "ARDUINOJSON_POOL_CAPACITY");
 
 static_assert(ARDUINOJSON_LITTLE_ENDIAN == 1, "ARDUINOJSON_LITTLE_ENDIAN");
 
 static_assert(ARDUINOJSON_USE_DOUBLE == 1, "ARDUINOJSON_USE_DOUBLE");
 
-static_assert(sizeof(ARDUINOJSON_NAMESPACE::VariantSlot) == 16,
-              "sizeof(VariantSlot)");
+static_assert(sizeof(VariantData) == 8, "slot size");
 
 void setup() {}
 void loop() {}

extras/conf_test/x64.cpp

@@ -2,14 +2,14 @@
 
 static_assert(ARDUINOJSON_USE_LONG_LONG == 1, "ARDUINOJSON_USE_LONG_LONG");
 
-static_assert(ARDUINOJSON_SLOT_OFFSET_SIZE == 4,
-              "ARDUINOJSON_SLOT_OFFSET_SIZE");
+static_assert(ARDUINOJSON_SLOT_ID_SIZE == 4, "ARDUINOJSON_SLOT_ID_SIZE");
+
+static_assert(ARDUINOJSON_POOL_CAPACITY == 256, "ARDUINOJSON_POOL_CAPACITY");
 
 static_assert(ARDUINOJSON_LITTLE_ENDIAN == 1, "ARDUINOJSON_LITTLE_ENDIAN");
 
 static_assert(ARDUINOJSON_USE_DOUBLE == 1, "ARDUINOJSON_USE_DOUBLE");
 
-static_assert(sizeof(ARDUINOJSON_NAMESPACE::VariantSlot) == 32,
-              "sizeof(VariantSlot)");
+static_assert(sizeof(ArduinoJson::detail::VariantData) == 16, "slot size");
 
 int main() {}

extras/conf_test/x86.cpp

@@ -2,14 +2,14 @@
 
 static_assert(ARDUINOJSON_USE_LONG_LONG == 1, "ARDUINOJSON_USE_LONG_LONG");
 
-static_assert(ARDUINOJSON_SLOT_OFFSET_SIZE == 2,
-              "ARDUINOJSON_SLOT_OFFSET_SIZE");
+static_assert(ARDUINOJSON_SLOT_ID_SIZE == 2, "ARDUINOJSON_SLOT_ID_SIZE");
+
+static_assert(ARDUINOJSON_POOL_CAPACITY == 128, "ARDUINOJSON_POOL_CAPACITY");
 
 static_assert(ARDUINOJSON_LITTLE_ENDIAN == 1, "ARDUINOJSON_LITTLE_ENDIAN");
 
 static_assert(ARDUINOJSON_USE_DOUBLE == 1, "ARDUINOJSON_USE_DOUBLE");
 
-static_assert(sizeof(ARDUINOJSON_NAMESPACE::VariantSlot) == 16,
-              "sizeof(VariantSlot)");
+static_assert(sizeof(ArduinoJson::detail::VariantData) == 8, "slot size");
 
 int main() {}

extras/fuzzing/CMakeLists.txt

@@ -1,7 +1,10 @@
 # ArduinoJson - https://arduinojson.org
-# Copyright © 2014-2022, Benoit BLANCHON
+# Copyright © 2014-2025, Benoit BLANCHON
 # MIT License
 
+set(CMAKE_CXX_STANDARD 11)
+set(CMAKE_CXX_STANDARD_REQUIRED ON)
+
 if(MSVC)
 	add_compile_options(-D_CRT_SECURE_NO_WARNINGS)
 endif()
@@ -22,7 +25,7 @@ target_link_libraries(json_reproducer
 	ArduinoJson
 )
 
-macro(add_fuzzer name)	
+macro(add_fuzzer name)
 	set(FUZZER "${name}_fuzzer")
 	set(CORPUS_DIR "${CMAKE_CURRENT_SOURCE_DIR}/${name}_corpus")
 	set(SEED_CORPUS_DIR "${CMAKE_CURRENT_SOURCE_DIR}/${name}_seed_corpus")
@@ -33,27 +36,32 @@ macro(add_fuzzer name)
 		ArduinoJson
 	)
 	set_target_properties("${FUZZER}"
-		PROPERTIES 
-			COMPILE_FLAGS  
-				"-fprofile-instr-generate -fcoverage-mapping -fsanitize=fuzzer -fno-sanitize-recover=all"
-			LINK_FLAGS
-				"-fprofile-instr-generate -fcoverage-mapping -fsanitize=fuzzer -fno-sanitize-recover=all"
+		PROPERTIES
+			COMPILE_FLAGS "-fprofile-instr-generate -fcoverage-mapping -fsanitize=fuzzer -fno-sanitize-recover=all"
+			LINK_FLAGS "-fprofile-instr-generate -fcoverage-mapping -fsanitize=fuzzer -fno-sanitize-recover=all"
 	)
 
 	add_test(
-		NAME
-			"${FUZZER}"
-		COMMAND
-			"${FUZZER}" "${CORPUS_DIR}" "${SEED_CORPUS_DIR}" -max_total_time=5 -timeout=1
+		NAME "${FUZZER}"
+		COMMAND "${FUZZER}" "${CORPUS_DIR}" "${SEED_CORPUS_DIR}" -max_total_time=5 -timeout=1
 	)
 
 	set_tests_properties("${FUZZER}"
 		PROPERTIES
-			LABELS 		"Fuzzing"
+		LABELS "Fuzzing"
 	)
 endmacro()
 
-if (CMAKE_CXX_COMPILER_ID STREQUAL "Clang" AND CMAKE_CXX_COMPILER_VERSION VERSION_GREATER 6)
+# Needs Clang 6+ to compile
+if(CMAKE_CXX_COMPILER_ID STREQUAL "Clang" AND CMAKE_CXX_COMPILER_VERSION VERSION_GREATER_EQUAL 6)
+	if(DEFINED ENV{GITHUB_ACTIONS} AND CMAKE_CXX_COMPILER_VERSION MATCHES "^11\\.")
+		# Clang 11 fails on GitHub Actions with the following error:
+		# > ERROR: UndefinedBehaviorSanitizer failed to allocate 0x0 (0) bytes of SetAlternateSignalStack (error code: 22)
+		# > Sanitizer CHECK failed: /build/llvm-toolchain-11-mnvtwk/llvm-toolchain-11-11.1.0/compiler-rt/lib/sanitizer_common/sanitizer_common.cpp:54 ((0 && "unable to mmap")) != (0) (0, 0)
+		message(WARNING "Fuzzing is disabled on GitHub Actions to workaround a bug in Clang 11")
+		return()
+	endif()
+
 	add_fuzzer(json)
 	add_fuzzer(msgpack)
 endif()

extras/fuzzing/Makefile

@@ -1,6 +1,6 @@
 # CAUTION: this file is invoked by https://github.com/google/oss-fuzz
 
-CXXFLAGS += -I../../src -DARDUINOJSON_DEBUG=1
+CXXFLAGS += -I../../src -DARDUINOJSON_DEBUG=1 -std=c++11
 
 all: \
 	$(OUT)/json_fuzzer \

extras/fuzzing/json_fuzzer.cpp

@@ -1,7 +1,7 @@
 #include <ArduinoJson.h>
 
-extern "C" int LLVMFuzzerTestOneInput(const uint8_t *data, size_t size) {
-  DynamicJsonDocument doc(4096);
+extern "C" int LLVMFuzzerTestOneInput(const uint8_t* data, size_t size) {
+  JsonDocument doc;
   DeserializationError error = deserializeJson(doc, data, size);
   if (!error) {
     std::string json;

extras/fuzzing/msgpack_fuzzer.cpp

@@ -1,7 +1,7 @@
 #include <ArduinoJson.h>
 
-extern "C" int LLVMFuzzerTestOneInput(const uint8_t *data, size_t size) {
-  DynamicJsonDocument doc(4096);
+extern "C" int LLVMFuzzerTestOneInput(const uint8_t* data, size_t size) {
+  JsonDocument doc;
   DeserializationError error = deserializeMsgPack(doc, data, size);
   if (!error) {
     std::string json;

extras/fuzzing/reproducer.cpp

@@ -1,5 +1,5 @@
 // ArduinoJson - https://arduinojson.org
-// Copyright © 2014-2022, Benoit BLANCHON
+// Copyright © 2014-2025, Benoit BLANCHON
 // MIT License
 
 // This file is NOT use by Google's OSS fuzz

extras/scripts/build-arduino-package.sh

@@ -1,23 +0,0 @@
-#!/bin/bash
-
-set -eu
-
-INPUT=$1
-OUTPUT=$2
-
-cd "$INPUT"
-
-# remove existing file
-rm -f "$OUTPUT"
-
-# create zip
-7z a "$OUTPUT" \
-	-xr!.vs \
-	CHANGELOG.md \
-	examples \
-	src \
-	keywords.txt \
-	library.properties \
-	LICENSE.md \
-	README.md \
-	ArduinoJson.h

extras/scripts/build-single-header.sh

@@ -53,7 +53,8 @@ process()
 }
 
 simplify_namespaces() {
-	perl -p0i -e 's|\}  // namespace ARDUINOJSON_NAMESPACE\r?\nnamespace ARDUINOJSON_NAMESPACE \{\r?\n||igs' "$1"
+	perl -p0i -e 's|ARDUINOJSON_END_PUBLIC_NAMESPACE\r?\nARDUINOJSON_BEGIN_PUBLIC_NAMESPACE\r?\n||igs' "$1"
+	perl -p0i -e 's|ARDUINOJSON_END_PRIVATE_NAMESPACE\r?\nARDUINOJSON_BEGIN_PRIVATE_NAMESPACE\r?\n||igs' "$1"
 	rm -f "$1.bak"
 }
 

extras/scripts/extract_changes.awk

@@ -0,0 +1,29 @@
+#!/usr/bin/awk -f
+
+# Start echoing after the first list item
+/\* / {
+    STARTED=1
+    EMPTY_LINE=0
+}
+
+# Remember if we have seen an empty line
+/^[[:space:]]*$/ {
+    EMPTY_LINE=1
+}
+
+# Exit when seeing a new version number
+/^v[[:digit:]]/ {
+    if (STARTED) exit
+}
+
+# Print if the line is not empty
+# and restore the empty line we have skipped
+!/^[[:space:]]*$/ {
+    if (STARTED) {
+        if (EMPTY_LINE) {
+            print ""
+            EMPTY_LINE=0
+        }
+        print
+    }
+}

extras/scripts/get-release-body.sh

@@ -1,14 +0,0 @@
-#!/bin/bash
-
-set -eu
-
-TAG="$1"
-CHANGELOG="$2"
-
-cat << END
-## Changes
-
-$(awk '/\* /{ FOUND=1 } /^[[:space:]]*$/ { if(FOUND) exit } { if(FOUND) print }' "$CHANGELOG")
-
-[View version history](https://github.com/bblanchon/ArduinoJson/blob/$TAG/CHANGELOG.md)
-END

extras/scripts/get-release-page.sh

@@ -4,15 +4,15 @@ set -eu
 
 VERSION="$1"
 CHANGELOG="$2"
-FRONTMATTER="$3"
+ARDUINOJSON_H="$3"
 
 cat << END
 ---
-branch: v6
+branch: v7
 version: $VERSION
 date: '$(date +'%Y-%m-%d')'
-$(cat "$FRONTMATTER")
+$(extras/scripts/wandbox/publish.sh "$ARDUINOJSON_H")
 ---
 
-$(awk '/\* /{ FOUND=1; print; next } { if (FOUND) exit}' "$CHANGELOG")
+$(extras/scripts/extract_changes.awk "$CHANGELOG")
 END

extras/scripts/publish-particle-library.sh

@@ -9,7 +9,7 @@ trap 'rm -rf "$WORK_DIR"' EXIT
 cp "$SOURCE_DIR/README.md" "$WORK_DIR/README.md"
 cp "$SOURCE_DIR/CHANGELOG.md" "$WORK_DIR/CHANGELOG.md"
 cp "$SOURCE_DIR/library.properties" "$WORK_DIR/library.properties"
-cp "$SOURCE_DIR/LICENSE.md" "$WORK_DIR/LICENSE.txt"
+cp "$SOURCE_DIR/LICENSE.txt" "$WORK_DIR/LICENSE.txt"
 cp -r "$SOURCE_DIR/src" "$WORK_DIR/"
 cp -r "$SOURCE_DIR/examples" "$WORK_DIR/"
 

extras/scripts/publish.sh

@@ -2,7 +2,7 @@
 
 set -eu
 
-which awk sed jq 7z curl perl >/dev/null
+which awk sed jq curl perl >/dev/null
 
 cd "$(dirname "$0")/../.."
 
@@ -15,6 +15,7 @@ VERSION="$1"
 DATE=$(date +%F)
 TAG="v$VERSION"
 VERSION_REGEX='[0-9]+\.[0-9]+\.[0-9]+(-[a-z0-9]+)?'
+STARS=$(curl -s https://api.github.com/repos/bblanchon/ArduinoJson | jq '.stargazers_count')
 
 update_version_in_source () {
 	IFS=".-" read MAJOR MINOR REVISION EXTRA < <(echo "$VERSION")
@@ -29,26 +30,39 @@ update_version_in_source () {
 	sed -i~ -bE "s/(project\\s*\\(ArduinoJson\\s+VERSION\\s+).*?\\)/\\1$MAJOR.$MINOR.$REVISION)/" CMakeLists.txt
 	rm CMakeLists.txt~
 
-	sed -i~ -bE "s/\"version\":.*$/\"version\": \"$VERSION\",/" library.json
+	sed -i~ -bE \
+		-e "s/\"version\":.*$/\"version\": \"$VERSION\",/" \
+		-e "s/[0-9]+ stars/$STARS stars/" \
+		library.json
 	rm library.json~
 
-	sed -i~ -bE "s/version=.*$/version=$VERSION/" library.properties
+	sed -i~ -bE \
+		-e "s/version=.*$/version=$VERSION/" \
+		-e "s/[0-9]+ stars/$STARS stars/" \
+		library.properties
 	rm library.properties~
 
 	sed -i~ -bE "s/version: .*$/version: $VERSION.{build}/" appveyor.yml
 	rm appveyor.yml~
 
+	sed -i~ -bE \
+		-e "s/^version: .*$/version: \"$VERSION\"/" \
+		-e "s/[0-9]+ stars/$STARS stars/" \
+		idf_component.yml
+	rm idf_component.yml~
+
 	sed -i~ -bE \
 		-e "s/ARDUINOJSON_VERSION .*$/ARDUINOJSON_VERSION \"$VERSION\"/" \
 		-e "s/ARDUINOJSON_VERSION_MAJOR .*$/ARDUINOJSON_VERSION_MAJOR $MAJOR/" \
 		-e "s/ARDUINOJSON_VERSION_MINOR .*$/ARDUINOJSON_VERSION_MINOR $MINOR/" \
 		-e "s/ARDUINOJSON_VERSION_REVISION .*$/ARDUINOJSON_VERSION_REVISION $REVISION/" \
+		-e "s/ARDUINOJSON_VERSION_MACRO .*$/ARDUINOJSON_VERSION_MACRO V$MAJOR$MINOR$REVISION/" \
 		src/ArduinoJson/version.hpp
 	rm src/ArduinoJson/version.hpp*~
 }
 
 commit_new_version () {
-	git add src/ArduinoJson/version.hpp README.md CHANGELOG.md library.json library.properties appveyor.yml CMakeLists.txt
+	git add src/ArduinoJson/version.hpp README.md CHANGELOG.md library.json library.properties appveyor.yml CMakeLists.txt idf_component.yml
 	git commit -m "Set version to $VERSION"
 }
 
@@ -66,10 +80,8 @@ commit_new_version
 add_tag
 push
 
-extras/scripts/build-arduino-package.sh . "../ArduinoJson-$TAG.zip"
 extras/scripts/build-single-header.sh "src/ArduinoJson.h" "../ArduinoJson-$TAG.h"
 extras/scripts/build-single-header.sh "src/ArduinoJson.hpp" "../ArduinoJson-$TAG.hpp"
-extras/scripts/wandbox/publish.sh "../ArduinoJson-$TAG.h" > "../ArduinoJson-$TAG-wandbox.txt" || echo "Wandbox failed!"
-extras/scripts/get-release-page.sh "$VERSION" "CHANGELOG.md" "../ArduinoJson-$TAG-wandbox.txt" > "../ArduinoJson-$TAG.md"
+extras/scripts/get-release-page.sh "$VERSION" "CHANGELOG.md" "../ArduinoJson-$TAG.h" > "../ArduinoJson-$TAG.md"
 
 echo "You can now copy ../ArduinoJson-$TAG.md into arduinojson.org/collections/_versions/$VERSION.md"

extras/scripts/wandbox/JsonGeneratorExample.cpp

@@ -1,5 +1,5 @@
 // ArduinoJson - https://arduinojson.org
-// Copyright © 2014-2022, Benoit BLANCHON
+// Copyright © 2014-2025, Benoit BLANCHON
 // MIT License
 //
 // This example shows how to generate a JSON document with ArduinoJson.
@@ -9,35 +9,18 @@
 
 int main() {
   // Allocate the JSON document
-  //
-  // Inside the brackets, 200 is the RAM allocated to this document.
-  // Don't forget to change this value to match your requirement.
-  // Use https://arduinojson.org/v6/assistant to compute the capacity.
-  StaticJsonDocument<200> doc;
+  JsonDocument doc;
 
-  // StaticJsonObject allocates memory on the stack, it can be
-  // replaced by DynamicJsonDocument which allocates in the heap.
-  //
-  // DynamicJsonDocument  doc(200);
-
-  // StaticJsonObject allocates memory on the stack, it can be
-  // replaced by DynamicJsonDocument which allocates in the heap.
-  //
-  // DynamicJsonDocument  doc(200);
-
-  // Add values in the document
-  //
+  // Add values in the document.
   doc["sensor"] = "gps";
   doc["time"] = 1351824120;
 
-  // Add an array.
-  //
-  JsonArray data = doc.createNestedArray("data");
+  // Add an array
+  JsonArray data = doc["data"].to<JsonArray>();
   data.add(48.756080);
   data.add(2.302038);
 
   // Generate the minified JSON and send it to STDOUT
-  //
   serializeJson(doc, std::cout);
   // The above line prints:
   // {"sensor":"gps","time":1351824120,"data":[48.756080,2.302038]}
@@ -46,7 +29,6 @@ int main() {
   std::cout << std::endl;
 
   // Generate the prettified JSON and send it to STDOUT
-  //
   serializeJsonPretty(doc, std::cout);
   // The above line prints:
   // {

extras/scripts/wandbox/JsonParserExample.cpp

@@ -1,5 +1,5 @@
 // ArduinoJson - https://arduinojson.org
-// Copyright © 2014-2022, Benoit BLANCHON
+// Copyright © 2014-2025, Benoit BLANCHON
 // MIT License
 //
 // This example shows how to deserialize a JSON document with ArduinoJson.
@@ -9,38 +9,22 @@
 
 int main() {
   // Allocate the JSON document
-  //
-  // Inside the brackets, 200 is the capacity of the memory pool in bytes.
-  // Don't forget to change this value to match your JSON document.
-  // Use https://arduinojson.org/v6/assistant to compute the capacity.
-  StaticJsonDocument<300> doc;
+  JsonDocument doc;
 
-  // StaticJsonDocument<N> allocates memory on the stack, it can be
-  // replaced by DynamicJsonDocument which allocates in the heap.
-  //
-  // DynamicJsonDocument doc(200);
-
-  // JSON input string.
-  //
-  // Using a char[], as shown here, enables the "zero-copy" mode. This mode uses
-  // the minimal amount of memory because the JsonDocument stores pointers to
-  // the input buffer.
-  // If you use another type of input, ArduinoJson must copy the strings from
-  // the input to the JsonDocument, so you need to increase the capacity of the
-  // JsonDocument.
-  char json[] =
+  // JSON input string
+  const char* json =
       "{\"sensor\":\"gps\",\"time\":1351824120,\"data\":[48.756080,2.302038]}";
 
   // Deserialize the JSON document
   DeserializationError error = deserializeJson(doc, json);
 
-  // Test if parsing succeeds.
+  // Test if parsing succeeds
   if (error) {
     std::cerr << "deserializeJson() failed: " << error.c_str() << std::endl;
     return 1;
   }
 
-  // Fetch values.
+  // Fetch the values
   //
   // Most of the time, you can rely on the implicit casts.
   // In other case, you can do doc["time"].as<long>();
@@ -49,7 +33,7 @@ int main() {
   double latitude = doc["data"][0];
   double longitude = doc["data"][1];
 
-  // Print values.
+  // Print the values
   std::cout << sensor << std::endl;
   std::cout << time << std::endl;
   std::cout << latitude << std::endl;

extras/scripts/wandbox/MsgPackParserExample.cpp

@@ -1,5 +1,5 @@
 // ArduinoJson - https://arduinojson.org
-// Copyright © 2014-2022, Benoit BLANCHON
+// Copyright © 2014-2025, Benoit BLANCHON
 // MIT License
 //
 // This example shows how to generate a JSON document with ArduinoJson.
@@ -9,22 +9,9 @@
 
 int main() {
   // Allocate the JSON document
-  //
-  // Inside the brackets, 300 is the size of the memory pool in bytes.
-  // Don't forget to change this value to match your JSON document.
-  // Use https://arduinojson.org/assistant to compute the capacity.
-  StaticJsonDocument<300> doc;
+  JsonDocument doc;
 
-  // StaticJsonObject allocates memory on the stack, it can be
-  // replaced by DynamicJsonObject which allocates in the heap.
-  //
-  // DynamicJsonObject doc(200);
-
-  // MessagePack input string.
-  //
-  // It's better to use a char[] as shown here.
-  // If you use a const char* or a String, ArduinoJson will
-  // have to make a copy of the input in the JsonBuffer.
+  // The MessagePack input string
   uint8_t input[] = {131, 166, 115, 101, 110, 115, 111, 114, 163, 103, 112, 115,
                      164, 116, 105, 109, 101, 206, 80,  147, 50,  248, 164, 100,
                      97,  116, 97,  146, 203, 64,  72,  96,  199, 58,  188, 148,
@@ -36,20 +23,16 @@ int main() {
   //   "data": [48.75608, 2.302038]
   // }
 
-  // doc of the object tree.
-  //
-  // It's a reference to the JsonObject, the actual bytes are inside the
-  // JsonBuffer with all the other nodes of the object tree.
-  // Memory is freed when jsonBuffer goes out of scope.
+  // Parse the input
   DeserializationError error = deserializeMsgPack(doc, input);
 
-  // Test if parsing succeeds.
+  // Test if parsing succeeds
   if (error) {
     std::cerr << "deserializeMsgPack() failed: " << error.c_str() << std::endl;
     return 1;
   }
 
-  // Fetch values.
+  // Fetch the values
   //
   // Most of the time, you can rely on the implicit casts.
   // In other case, you can do doc["time"].as<long>();
@@ -58,7 +41,7 @@ int main() {
   double latitude = doc["data"][0];
   double longitude = doc["data"][1];
 
-  // Print values.
+  // Print the values
   std::cout << sensor << std::endl;
   std::cout << time << std::endl;
   std::cout << latitude << std::endl;

extras/scripts/wandbox/publish.sh

@@ -14,8 +14,8 @@ compile() {
 {
   "code":$(read_string "$FILE_PATH"),
   "codes": [{"file":"ArduinoJson.h","code":$(read_string "$ARDUINOJSON_H")}],
-  "options": "warning",
-  "compiler": "gcc-4.9.4",
+  "options": "warning,c++11",
+  "compiler": "gcc-head",
   "save": true
 }
 END

extras/tests/CMakeLists.txt

@@ -1,27 +1,33 @@
 # ArduinoJson - https://arduinojson.org
-# Copyright © 2014-2022, Benoit BLANCHON
+# Copyright © 2014-2025, Benoit BLANCHON
 # MIT License
 
-set(CMAKE_CXX_STANDARD 98)
+set(CMAKE_CXX_STANDARD 11)
 set(CMAKE_CXX_STANDARD_REQUIRED ON)
 
-add_subdirectory(catch)
+link_libraries(ArduinoJson)
 
-link_libraries(ArduinoJson catch)
+# Failing builds should only link with ArduinoJson, not catch
+add_subdirectory(FailingBuilds)
+
+add_subdirectory(catch)
+link_libraries(catch)
 
 include_directories(Helpers)
-add_subdirectory(Cpp11)
 add_subdirectory(Cpp17)
 add_subdirectory(Cpp20)
-add_subdirectory(FailingBuilds)
+add_subdirectory(Deprecated)
 add_subdirectory(IntegrationTests)
 add_subdirectory(JsonArray)
+add_subdirectory(JsonArrayConst)
 add_subdirectory(JsonDeserializer)
 add_subdirectory(JsonDocument)
 add_subdirectory(JsonObject)
+add_subdirectory(JsonObjectConst)
 add_subdirectory(JsonSerializer)
 add_subdirectory(JsonVariant)
-add_subdirectory(MemoryPool)
+add_subdirectory(JsonVariantConst)
+add_subdirectory(ResourceManager)
 add_subdirectory(Misc)
 add_subdirectory(MixedConfiguration)
 add_subdirectory(MsgPackDeserializer)

extras/tests/Cpp11/CMakeLists.txt

@@ -1,32 +0,0 @@
-# ArduinoJson - https://arduinojson.org
-# Copyright © 2014-2022, Benoit BLANCHON
-# MIT License
-
-if("cxx_nullptr" IN_LIST CMAKE_CXX_COMPILE_FEATURES)
-	list(APPEND SOURCES nullptr.cpp)
-	add_definitions(-DARDUINOJSON_HAS_NULLPTR=1)
-endif()
-
-if("cxx_auto_type" IN_LIST CMAKE_CXX_COMPILE_FEATURES AND "cxx_constexpr" IN_LIST CMAKE_CXX_COMPILE_FEATURES)
-	list(APPEND SOURCES issue1120.cpp)
-endif()
-
-if("cxx_long_long_type" IN_LIST CMAKE_CXX_COMPILE_FEATURES)
-	list(APPEND SOURCES use_long_long_0.cpp use_long_long_1.cpp)
-endif()
-
-if(NOT SOURCES)
-	return()
-endif()
-
-set(CMAKE_CXX_STANDARD 11)
-set(CMAKE_CXX_STANDARD_REQUIRED ON)
-
-add_executable(Cpp11Tests ${SOURCES})
-
-add_test(Cpp11 Cpp11Tests)
-
-set_tests_properties(Cpp11
-	PROPERTIES
-		LABELS 		"Catch"
-)

extras/tests/Cpp11/use_long_long_0.cpp

@@ -1,16 +0,0 @@
-#define ARDUINOJSON_USE_LONG_LONG 0
-#include <ArduinoJson.h>
-
-#include <catch.hpp>
-
-TEST_CASE("ARDUINOJSON_USE_LONG_LONG == 0") {
-  DynamicJsonDocument doc(4096);
-
-  doc["A"] = 42;
-  doc["B"] = 84;
-
-  std::string json;
-  serializeJson(doc, json);
-
-  REQUIRE(json == "{\"A\":42,\"B\":84}");
-}

extras/tests/Cpp17/CMakeLists.txt

@@ -1,5 +1,5 @@
 # ArduinoJson - https://arduinojson.org
-# Copyright © 2014-2022, Benoit BLANCHON
+# Copyright © 2014-2025, Benoit BLANCHON
 # MIT License
 
 if(MSVC_VERSION LESS 1910)
@@ -25,5 +25,5 @@ add_test(Cpp17 Cpp17Tests)
 
 set_tests_properties(Cpp17
 	PROPERTIES
-		LABELS 		"Catch"
+		LABELS "Catch"
 )

extras/tests/Cpp17/string_view.cpp

@@ -1,14 +1,28 @@
-#include <ArduinoJson.h>
+// ArduinoJson - https://arduinojson.org
+// Copyright © 2014-2025, Benoit BLANCHON
+// MIT License
 
+// we expect ArduinoJson.h to include <string_view>
+// but we don't want it to included accidentally
+#undef ARDUINO
+#define ARDUINOJSON_ENABLE_STD_STREAM 0
+#define ARDUINOJSON_ENABLE_STD_STRING 0
+
+#include <ArduinoJson.h>
 #include <catch.hpp>
-#include <string_view>
+
+#include "Allocators.hpp"
+#include "Literals.hpp"
 
 #if !ARDUINOJSON_ENABLE_STRING_VIEW
 #  error ARDUINOJSON_ENABLE_STRING_VIEW must be set to 1
 #endif
 
+using ArduinoJson::detail::sizeofArray;
+
 TEST_CASE("string_view") {
-  StaticJsonDocument<256> doc;
+  SpyingAllocator spy;
+  JsonDocument doc(&spy);
   JsonVariant variant = doc.to<JsonVariant>();
 
   SECTION("deserializeJson()") {
@@ -19,7 +33,7 @@ TEST_CASE("string_view") {
 
   SECTION("JsonDocument::set()") {
     doc.set(std::string_view("123", 2));
-    REQUIRE(doc.as<std::string>() == "12");
+    REQUIRE(doc.as<std::string_view>() == "12");
   }
 
   SECTION("JsonDocument::operator[]() const") {
@@ -53,16 +67,15 @@ TEST_CASE("string_view") {
 
   SECTION("String deduplication") {
     doc.add(std::string_view("example one", 7));
-    REQUIRE(doc.memoryUsage() == JSON_ARRAY_SIZE(1) + 8);
-
     doc.add(std::string_view("example two", 7));
-    REQUIRE(doc.memoryUsage() == JSON_ARRAY_SIZE(2) + 8);
-
     doc.add(std::string_view("example\0tree", 12));
-    REQUIRE(doc.memoryUsage() == JSON_ARRAY_SIZE(3) + 21);
-
     doc.add(std::string_view("example\0tree and a half", 12));
-    REQUIRE(doc.memoryUsage() == JSON_ARRAY_SIZE(4) + 21);
+
+    REQUIRE(spy.log() == AllocatorLog{
+                             Allocate(sizeofPool()),
+                             Allocate(sizeofString("example")),
+                             Allocate(sizeofString("example tree")),
+                         });
   }
 
   SECTION("as<std::string_view>()") {
@@ -80,13 +93,13 @@ TEST_CASE("string_view") {
   }
 
   SECTION("String containing NUL") {
-    doc.set(std::string("hello\0world", 11));
+    doc.set("hello\0world"_s);
     REQUIRE(doc.as<std::string_view>().size() == 11);
     REQUIRE(doc.as<std::string_view>() == std::string_view("hello\0world", 11));
   }
 }
 
-using ARDUINOJSON_NAMESPACE::adaptString;
+using ArduinoJson::detail::adaptString;
 
 TEST_CASE("StringViewAdapter") {
   std::string_view str("bravoXXX", 5);

extras/tests/Cpp20/CMakeLists.txt

@@ -1,5 +1,5 @@
 # ArduinoJson - https://arduinojson.org
-# Copyright © 2014-2022, Benoit BLANCHON
+# Copyright © 2014-2025, Benoit BLANCHON
 # MIT License
 
 if(MSVC_VERSION LESS 1910)
@@ -25,5 +25,5 @@ add_test(Cpp20 Cpp20Tests)
 
 set_tests_properties(Cpp20
 	PROPERTIES
-		LABELS 		"Catch"
+		LABELS "Catch"
 )

extras/tests/Cpp20/smoke_test.cpp

@@ -4,7 +4,7 @@
 #include <string>
 
 TEST_CASE("C++20 smoke test") {
-  StaticJsonDocument<128> doc;
+  JsonDocument doc;
 
   deserializeJson(doc, "{\"hello\":\"world\"}");
   REQUIRE(doc["hello"] == "world");

extras/tests/Deprecated/BasicJsonDocument.cpp

@@ -0,0 +1,69 @@
+// ArduinoJson - https://arduinojson.org
+// Copyright © 2014-2025, Benoit BLANCHON
+// MIT License
+
+#include <ArduinoJson.h>
+#include <catch.hpp>
+
+#include <string>
+
+using ArduinoJson::detail::is_base_of;
+
+static std::string allocatorLog;
+
+struct CustomAllocator {
+  CustomAllocator() {
+    allocatorLog = "";
+  }
+
+  void* allocate(size_t n) {
+    allocatorLog += "A";
+    return malloc(n);
+  }
+
+  void deallocate(void* p) {
+    free(p);
+    allocatorLog += "D";
+  }
+
+  void* reallocate(void* p, size_t n) {
+    allocatorLog += "R";
+    return realloc(p, n);
+  }
+};
+
+TEST_CASE("BasicJsonDocument") {
+  allocatorLog.clear();
+
+  SECTION("is a JsonDocument") {
+    REQUIRE(
+        is_base_of<JsonDocument, BasicJsonDocument<CustomAllocator>>::value ==
+        true);
+  }
+
+  SECTION("deserialize / serialize") {
+    BasicJsonDocument<CustomAllocator> doc(256);
+    deserializeJson(doc, "{\"hello\":\"world\"}");
+    REQUIRE(doc.as<std::string>() == "{\"hello\":\"world\"}");
+    doc.clear();
+    REQUIRE(allocatorLog == "AARARDDD");
+  }
+
+  SECTION("copy") {
+    BasicJsonDocument<CustomAllocator> doc(256);
+    doc["hello"] = "world";
+    auto copy = doc;
+    REQUIRE(copy.as<std::string>() == "{\"hello\":\"world\"}");
+    REQUIRE(allocatorLog == "AAAA");
+  }
+
+  SECTION("capacity") {
+    BasicJsonDocument<CustomAllocator> doc(256);
+    REQUIRE(doc.capacity() == 256);
+  }
+
+  SECTION("garbageCollect()") {
+    BasicJsonDocument<CustomAllocator> doc(256);
+    doc.garbageCollect();
+  }
+}

extras/tests/Deprecated/CMakeLists.txt

@@ -0,0 +1,35 @@
+# ArduinoJson - https://arduinojson.org
+# Copyright © 2014-2025, Benoit BLANCHON
+# MIT License
+
+if(CMAKE_CXX_COMPILER_ID MATCHES "(GNU|Clang)")
+	add_compile_options(
+		-w
+	)
+endif()
+
+if(MSVC)
+	add_compile_options(
+		/wd4996
+	)
+endif()
+
+add_executable(DeprecatedTests
+	add.cpp
+	BasicJsonDocument.cpp
+	containsKey.cpp
+	createNestedArray.cpp
+	createNestedObject.cpp
+	DynamicJsonDocument.cpp
+	macros.cpp
+	memoryUsage.cpp
+	shallowCopy.cpp
+	StaticJsonDocument.cpp
+)
+
+add_test(Deprecated DeprecatedTests)
+
+set_tests_properties(Deprecated
+	PROPERTIES
+	LABELS "Catch"
+)

extras/tests/Deprecated/DynamicJsonDocument.cpp

@@ -0,0 +1,37 @@
+// ArduinoJson - https://arduinojson.org
+// Copyright © 2014-2025, Benoit BLANCHON
+// MIT License
+
+#include <ArduinoJson.h>
+#include <catch.hpp>
+
+using ArduinoJson::detail::is_base_of;
+
+TEST_CASE("DynamicJsonDocument") {
+  SECTION("is a JsonDocument") {
+    REQUIRE(is_base_of<JsonDocument, DynamicJsonDocument>::value == true);
+  }
+
+  SECTION("deserialize / serialize") {
+    DynamicJsonDocument doc(256);
+    deserializeJson(doc, "{\"hello\":\"world\"}");
+    REQUIRE(doc.as<std::string>() == "{\"hello\":\"world\"}");
+  }
+
+  SECTION("copy") {
+    DynamicJsonDocument doc(256);
+    doc["hello"] = "world";
+    auto copy = doc;
+    REQUIRE(copy.as<std::string>() == "{\"hello\":\"world\"}");
+  }
+
+  SECTION("capacity") {
+    DynamicJsonDocument doc(256);
+    REQUIRE(doc.capacity() == 256);
+  }
+
+  SECTION("garbageCollect()") {
+    DynamicJsonDocument doc(256);
+    doc.garbageCollect();
+  }
+}

extras/tests/Deprecated/StaticJsonDocument.cpp

@@ -0,0 +1,32 @@
+// ArduinoJson - https://arduinojson.org
+// Copyright © 2014-2025, Benoit BLANCHON
+// MIT License
+
+#include <ArduinoJson.h>
+#include <catch.hpp>
+
+using ArduinoJson::detail::is_base_of;
+
+TEST_CASE("StaticJsonDocument") {
+  SECTION("is a JsonDocument") {
+    REQUIRE(is_base_of<JsonDocument, StaticJsonDocument<256>>::value == true);
+  }
+
+  SECTION("deserialize / serialize") {
+    StaticJsonDocument<256> doc;
+    deserializeJson(doc, "{\"hello\":\"world\"}");
+    REQUIRE(doc.as<std::string>() == "{\"hello\":\"world\"}");
+  }
+
+  SECTION("copy") {
+    StaticJsonDocument<256> doc;
+    doc["hello"] = "world";
+    auto copy = doc;
+    REQUIRE(copy.as<std::string>() == "{\"hello\":\"world\"}");
+  }
+
+  SECTION("capacity") {
+    StaticJsonDocument<256> doc;
+    REQUIRE(doc.capacity() == 256);
+  }
+}

extras/tests/Deprecated/add.cpp

@@ -0,0 +1,38 @@
+// ArduinoJson - https://arduinojson.org
+// Copyright © 2014-2025, Benoit BLANCHON
+// MIT License
+
+#include <ArduinoJson.h>
+#include <catch.hpp>
+
+TEST_CASE("JsonArray::add()") {
+  JsonDocument doc;
+  JsonArray array = doc.to<JsonArray>();
+  array.add().set(42);
+  REQUIRE(doc.as<std::string>() == "[42]");
+}
+
+TEST_CASE("JsonDocument::add()") {
+  JsonDocument doc;
+  doc.add().set(42);
+  REQUIRE(doc.as<std::string>() == "[42]");
+}
+
+TEST_CASE("ElementProxy::add()") {
+  JsonDocument doc;
+  doc[0].add().set(42);
+  REQUIRE(doc.as<std::string>() == "[[42]]");
+}
+
+TEST_CASE("MemberProxy::add()") {
+  JsonDocument doc;
+  doc["x"].add().set(42);
+  REQUIRE(doc.as<std::string>() == "{\"x\":[42]}");
+}
+
+TEST_CASE("JsonVariant::add()") {
+  JsonDocument doc;
+  JsonVariant v = doc.add();
+  v.add().set(42);
+  REQUIRE(doc.as<std::string>() == "[[42]]");
+}

extras/tests/Deprecated/containsKey.cpp

@@ -0,0 +1,246 @@
+// ArduinoJson - https://arduinojson.org
+// Copyright © 2014-2025, Benoit BLANCHON
+// MIT License
+
+#include <ArduinoJson.h>
+#include <catch.hpp>
+
+#include "Literals.hpp"
+
+TEST_CASE("JsonDocument::containsKey()") {
+  JsonDocument doc;
+
+  SECTION("returns true on object") {
+    doc["hello"] = "world";
+
+    REQUIRE(doc.containsKey("hello") == true);
+  }
+
+  SECTION("returns true when value is null") {
+    doc["hello"] = static_cast<const char*>(0);
+
+    REQUIRE(doc.containsKey("hello") == true);
+  }
+
+  SECTION("returns true when key is a std::string") {
+    doc["hello"] = "world";
+
+    REQUIRE(doc.containsKey("hello"_s) == true);
+  }
+
+  SECTION("returns false  on object") {
+    doc["world"] = "hello";
+
+    REQUIRE(doc.containsKey("hello") == false);
+  }
+
+  SECTION("returns false on array") {
+    doc.add("hello");
+
+    REQUIRE(doc.containsKey("hello") == false);
+  }
+
+  SECTION("returns false on null") {
+    REQUIRE(doc.containsKey("hello") == false);
+  }
+
+  SECTION("supports JsonVariant") {
+    doc["hello"] = "world";
+    doc["key"] = "hello";
+
+    REQUIRE(doc.containsKey(doc["key"]) == true);
+    REQUIRE(doc.containsKey(doc["foo"]) == false);
+  }
+
+#ifdef HAS_VARIABLE_LENGTH_ARRAY
+  SECTION("supports VLAs") {
+    size_t i = 16;
+    char vla[i];
+    strcpy(vla, "hello");
+
+    doc["hello"] = "world";
+
+    REQUIRE(doc.containsKey(vla) == true);
+  }
+#endif
+}
+
+TEST_CASE("MemberProxy::containsKey()") {
+  JsonDocument doc;
+  const auto& mp = doc["hello"];
+
+  SECTION("containsKey(const char*)") {
+    mp["key"] = "value";
+
+    REQUIRE(mp.containsKey("key") == true);
+    REQUIRE(mp.containsKey("key") == true);
+  }
+
+  SECTION("containsKey(std::string)") {
+    mp["key"] = "value";
+
+    REQUIRE(mp.containsKey("key"_s) == true);
+    REQUIRE(mp.containsKey("key"_s) == true);
+  }
+
+#ifdef HAS_VARIABLE_LENGTH_ARRAY
+  SECTION("supports VLAs") {
+    size_t i = 16;
+    char vla[i];
+    strcpy(vla, "hello");
+
+    mp["hello"] = "world";
+
+    REQUIRE(mp.containsKey(vla) == true);
+  }
+#endif
+}
+
+TEST_CASE("JsonObject::containsKey()") {
+  JsonDocument doc;
+  JsonObject obj = doc.to<JsonObject>();
+  obj["hello"] = 42;
+
+  SECTION("returns true only if key is present") {
+    REQUIRE(false == obj.containsKey("world"));
+    REQUIRE(true == obj.containsKey("hello"));
+  }
+
+  SECTION("returns false after remove()") {
+    obj.remove("hello");
+
+    REQUIRE(false == obj.containsKey("hello"));
+  }
+
+#ifdef HAS_VARIABLE_LENGTH_ARRAY
+  SECTION("key is a VLA") {
+    size_t i = 16;
+    char vla[i];
+    strcpy(vla, "hello");
+
+    REQUIRE(true == obj.containsKey(vla));
+  }
+#endif
+
+  SECTION("key is a JsonVariant") {
+    doc["key"] = "hello";
+    REQUIRE(true == obj.containsKey(obj["key"]));
+    REQUIRE(false == obj.containsKey(obj["hello"]));
+  }
+
+  SECTION("std::string") {
+    REQUIRE(true == obj.containsKey("hello"_s));
+  }
+
+  SECTION("unsigned char[]") {
+    unsigned char key[] = "hello";
+    REQUIRE(true == obj.containsKey(key));
+  }
+}
+
+TEST_CASE("JsonObjectConst::containsKey()") {
+  JsonDocument doc;
+  doc["hello"] = 42;
+  auto obj = doc.as<JsonObjectConst>();
+
+  SECTION("supports const char*") {
+    REQUIRE(false == obj.containsKey("world"));
+    REQUIRE(true == obj.containsKey("hello"));
+  }
+
+  SECTION("supports std::string") {
+    REQUIRE(false == obj.containsKey("world"_s));
+    REQUIRE(true == obj.containsKey("hello"_s));
+  }
+
+#ifdef HAS_VARIABLE_LENGTH_ARRAY
+  SECTION("supports VLA") {
+    size_t i = 16;
+    char vla[i];
+    strcpy(vla, "hello");
+
+    REQUIRE(true == obj.containsKey(vla));
+  }
+#endif
+
+  SECTION("supports JsonVariant") {
+    doc["key"] = "hello";
+    REQUIRE(true == obj.containsKey(obj["key"]));
+    REQUIRE(false == obj.containsKey(obj["hello"]));
+  }
+}
+
+TEST_CASE("JsonVariant::containsKey()") {
+  JsonDocument doc;
+  JsonVariant var = doc.to<JsonVariant>();
+
+  SECTION("returns false is unbound") {
+    CHECK_FALSE(JsonVariant().containsKey("hello"));
+  }
+
+  SECTION("containsKey(const char*)") {
+    var["hello"] = "world";
+
+    REQUIRE(var.containsKey("hello") == true);
+    REQUIRE(var.containsKey("world") == false);
+  }
+
+  SECTION("containsKey(std::string)") {
+    var["hello"] = "world";
+
+    REQUIRE(var.containsKey("hello"_s) == true);
+    REQUIRE(var.containsKey("world"_s) == false);
+  }
+
+  SECTION("containsKey(JsonVariant)") {
+    var["hello"] = "world";
+    var["key"] = "hello";
+
+    REQUIRE(var.containsKey(doc["key"]) == true);
+    REQUIRE(var.containsKey(doc["foo"]) == false);
+  }
+
+#ifdef HAS_VARIABLE_LENGTH_ARRAY
+  SECTION("supports VLAs") {
+    size_t i = 16;
+    char vla[i];
+    strcpy(vla, "hello");
+
+    var["hello"] = "world";
+
+    REQUIRE(var.containsKey(vla) == true);
+  }
+#endif
+}
+
+TEST_CASE("JsonVariantConst::containsKey()") {
+  JsonDocument doc;
+  doc["hello"] = "world";
+  JsonVariantConst var = doc.as<JsonVariant>();
+
+  SECTION("support const char*") {
+    REQUIRE(var.containsKey("hello") == true);
+    REQUIRE(var.containsKey("world") == false);
+  }
+
+  SECTION("support std::string") {
+    REQUIRE(var.containsKey("hello"_s) == true);
+    REQUIRE(var.containsKey("world"_s) == false);
+  }
+
+#ifdef HAS_VARIABLE_LENGTH_ARRAY
+  SECTION("supports VLA") {
+    size_t i = 16;
+    char vla[i];
+    strcpy(vla, "hello");
+
+    REQUIRE(true == var.containsKey(vla));
+  }
+#endif
+
+  SECTION("support JsonVariant") {
+    doc["key"] = "hello";
+    REQUIRE(var.containsKey(var["key"]) == true);
+    REQUIRE(var.containsKey(var["foo"]) == false);
+  }
+}

extras/tests/Deprecated/createNestedArray.cpp

@@ -0,0 +1,113 @@
+// ArduinoJson - https://arduinojson.org
+// Copyright © 2014-2025, Benoit BLANCHON
+// MIT License
+
+#include <ArduinoJson.h>
+#include <catch.hpp>
+
+#include <string>
+
+#include "Literals.hpp"
+
+TEST_CASE("JsonDocument::createNestedArray()") {
+  JsonDocument doc;
+
+  SECTION("createNestedArray()") {
+    JsonArray array = doc.createNestedArray();
+    array.add(42);
+    REQUIRE(doc.as<std::string>() == "[[42]]");
+  }
+
+  SECTION("createNestedArray(const char*)") {
+    JsonArray array = doc.createNestedArray("key");
+    array.add(42);
+    REQUIRE(doc.as<std::string>() == "{\"key\":[42]}");
+  }
+
+  SECTION("createNestedArray(std::string)") {
+    JsonArray array = doc.createNestedArray("key"_s);
+    array.add(42);
+    REQUIRE(doc.as<std::string>() == "{\"key\":[42]}");
+  }
+
+#ifdef HAS_VARIABLE_LENGTH_ARRAY
+  SECTION("createNestedArray(VLA)") {
+    size_t i = 16;
+    char vla[i];
+    strcpy(vla, "key");
+    JsonArray array = doc.createNestedArray(vla);
+    array.add(42);
+    REQUIRE(doc.as<std::string>() == "{\"key\":[42]}");
+  }
+#endif
+}
+
+TEST_CASE("JsonArray::createNestedArray()") {
+  JsonDocument doc;
+  JsonArray array = doc.to<JsonArray>();
+  JsonArray nestedArray = array.createNestedArray();
+  nestedArray.add(42);
+  REQUIRE(doc.as<std::string>() == "[[42]]");
+}
+
+TEST_CASE("JsonObject::createNestedArray()") {
+  JsonDocument doc;
+  JsonObject object = doc.to<JsonObject>();
+
+  SECTION("createNestedArray(const char*)") {
+    JsonArray array = object.createNestedArray("key");
+    array.add(42);
+    REQUIRE(doc.as<std::string>() == "{\"key\":[42]}");
+  }
+
+  SECTION("createNestedArray(std::string)") {
+    JsonArray array = object.createNestedArray("key"_s);
+    array.add(42);
+    REQUIRE(doc.as<std::string>() == "{\"key\":[42]}");
+  }
+
+#ifdef HAS_VARIABLE_LENGTH_ARRAY
+  SECTION("createNestedArray(VLA)") {
+    size_t i = 16;
+    char vla[i];
+    strcpy(vla, "key");
+    JsonArray array = object.createNestedArray(vla);
+    array.add(42);
+    REQUIRE(doc.as<std::string>() == "{\"key\":[42]}");
+  }
+#endif
+}
+
+TEST_CASE("JsonVariant::createNestedArray()") {
+  JsonDocument doc;
+  JsonVariant variant = doc.to<JsonVariant>();
+
+  SECTION("createNestedArray()") {
+    JsonArray array = variant.createNestedArray();
+    array.add(42);
+    REQUIRE(doc.as<std::string>() == "[[42]]");
+  }
+
+  SECTION("createNestedArray(const char*)") {
+    JsonArray array = variant.createNestedArray("key");
+    array.add(42);
+    REQUIRE(doc.as<std::string>() == "{\"key\":[42]}");
+  }
+
+  SECTION("createNestedArray(std::string)") {
+    JsonArray array = variant.createNestedArray("key"_s);
+    array.add(42);
+    REQUIRE(doc.as<std::string>() == "{\"key\":[42]}");
+  }
+
+#ifdef HAS_VARIABLE_LENGTH_ARRAY
+  SECTION("createNestedArray(VLA)") {
+    size_t i = 16;
+    char vla[i];
+    strcpy(vla, "key");
+    JsonArray array = variant.createNestedArray(vla);
+    array.add(42);
+    REQUIRE(doc.as<std::string>() == "{\"key\":[42]}");
+  }
+#endif
+}

extras/tests/Deprecated/createNestedObject.cpp

@@ -0,0 +1,113 @@
+// ArduinoJson - https://arduinojson.org
+// Copyright © 2014-2025, Benoit BLANCHON
+// MIT License
+
+#include <ArduinoJson.h>
+#include <catch.hpp>
+
+#include <string>
+
+#include "Literals.hpp"
+
+TEST_CASE("JsonDocument::createNestedObject()") {
+  JsonDocument doc;
+
+  SECTION("createNestedObject()") {
+    JsonObject object = doc.createNestedObject();
+    object["hello"] = "world";
+    REQUIRE(doc.as<std::string>() == "[{\"hello\":\"world\"}]");
+  }
+
+  SECTION("createNestedObject(const char*)") {
+    JsonObject object = doc.createNestedObject("key");
+    object["hello"] = "world";
+    REQUIRE(doc.as<std::string>() == "{\"key\":{\"hello\":\"world\"}}");
+  }
+
+  SECTION("createNestedObject(std::string)") {
+    JsonObject object = doc.createNestedObject("key"_s);
+    object["hello"] = "world";
+    REQUIRE(doc.as<std::string>() == "{\"key\":{\"hello\":\"world\"}}");
+  }
+
+#ifdef HAS_VARIABLE_LENGTH_ARRAY
+  SECTION("createNestedObject(VLA)") {
+    size_t i = 16;
+    char vla[i];
+    strcpy(vla, "key");
+    JsonObject object = doc.createNestedObject(vla);
+    object["hello"] = "world";
+    REQUIRE(doc.as<std::string>() == "{\"key\":{\"hello\":\"world\"}}");
+  }
+#endif
+}
+
+TEST_CASE("JsonArray::createNestedObject()") {
+  JsonDocument doc;
+  JsonArray array = doc.to<JsonArray>();
+  JsonObject object = array.createNestedObject();
+  object["hello"] = "world";
+  REQUIRE(doc.as<std::string>() == "[{\"hello\":\"world\"}]");
+}
+
+TEST_CASE("JsonObject::createNestedObject()") {
+  JsonDocument doc;
+  JsonObject object = doc.to<JsonObject>();
+
+  SECTION("createNestedObject(const char*)") {
+    JsonObject nestedObject = object.createNestedObject("key");
+    nestedObject["hello"] = "world";
+    REQUIRE(doc.as<std::string>() == "{\"key\":{\"hello\":\"world\"}}");
+  }
+
+  SECTION("createNestedObject(std::string)") {
+    JsonObject nestedObject = object.createNestedObject("key"_s);
+    nestedObject["hello"] = "world";
+    REQUIRE(doc.as<std::string>() == "{\"key\":{\"hello\":\"world\"}}");
+  }
+
+#ifdef HAS_VARIABLE_LENGTH_ARRAY
+  SECTION("createNestedObject(VLA)") {
+    size_t i = 16;
+    char vla[i];
+    strcpy(vla, "key");
+    JsonObject nestedObject = object.createNestedObject(vla);
+    nestedObject["hello"] = "world";
+    REQUIRE(doc.as<std::string>() == "{\"key\":{\"hello\":\"world\"}}");
+  }
+#endif
+}
+
+TEST_CASE("JsonVariant::createNestedObject()") {
+  JsonDocument doc;
+  JsonVariant variant = doc.to<JsonVariant>();
+
+  SECTION("createNestedObject()") {
+    JsonObject object = variant.createNestedObject();
+    object["hello"] = "world";
+    REQUIRE(doc.as<std::string>() == "[{\"hello\":\"world\"}]");
+  }
+
+  SECTION("createNestedObject(const char*)") {
+    JsonObject object = variant.createNestedObject("key");
+    object["hello"] = "world";
+    REQUIRE(doc.as<std::string>() == "{\"key\":{\"hello\":\"world\"}}");
+  }
+
+  SECTION("createNestedObject(std::string)") {
+    JsonObject object = variant.createNestedObject("key"_s);
+    object["hello"] = "world";
+    REQUIRE(doc.as<std::string>() == "{\"key\":{\"hello\":\"world\"}}");
+  }
+
+#ifdef HAS_VARIABLE_LENGTH_ARRAY
+  SECTION("createNestedObject(VLA)") {
+    size_t i = 16;
+    char vla[i];
+    strcpy(vla, "key");
+    JsonObject object = variant.createNestedObject(vla);
+    object["hello"] = "world";
+    REQUIRE(doc.as<std::string>() == "{\"key\":{\"hello\":\"world\"}}");
+  }
+#endif
+}

extras/tests/Deprecated/macros.cpp

@@ -0,0 +1,18 @@
+// ArduinoJson - https://arduinojson.org
+// Copyright © 2014-2025, Benoit BLANCHON
+// MIT License
+
+#include <ArduinoJson.h>
+#include <catch.hpp>
+
+TEST_CASE("JSON_ARRAY_SIZE") {
+  REQUIRE(JSON_ARRAY_SIZE(10) == ArduinoJson::detail::sizeofArray(10));
+}
+
+TEST_CASE("JSON_OBJECT_SIZE") {
+  REQUIRE(JSON_OBJECT_SIZE(10) == ArduinoJson::detail::sizeofObject(10));
+}
+
+TEST_CASE("JSON_STRING_SIZE") {
+  REQUIRE(JSON_STRING_SIZE(10) == 11);  // issue #2054
+}

extras/tests/Deprecated/memoryUsage.cpp

@@ -0,0 +1,51 @@
+// ArduinoJson - https://arduinojson.org
+// Copyright © 2014-2025, Benoit BLANCHON
+// MIT License
+
+#include <ArduinoJson.h>
+#include <catch.hpp>
+
+TEST_CASE("JsonArray::memoryUsage()") {
+  JsonArray array;
+  REQUIRE(array.memoryUsage() == 0);
+}
+
+TEST_CASE("JsonArrayConst::memoryUsage()") {
+  JsonArrayConst array;
+  REQUIRE(array.memoryUsage() == 0);
+}
+
+TEST_CASE("JsonDocument::memoryUsage()") {
+  JsonDocument doc;
+  REQUIRE(doc.memoryUsage() == 0);
+}
+
+TEST_CASE("JsonObject::memoryUsage()") {
+  JsonObject array;
+  REQUIRE(array.memoryUsage() == 0);
+}
+
+TEST_CASE("JsonObjectConst::memoryUsage()") {
+  JsonObjectConst array;
+  REQUIRE(array.memoryUsage() == 0);
+}
+
+TEST_CASE("JsonVariant::memoryUsage()") {
+  JsonVariant doc;
+  REQUIRE(doc.memoryUsage() == 0);
+}
+
+TEST_CASE("JsonVariantConst::memoryUsage()") {
+  JsonVariantConst doc;
+  REQUIRE(doc.memoryUsage() == 0);
+}
+
+TEST_CASE("ElementProxy::memoryUsage()") {
+  JsonDocument doc;
+  REQUIRE(doc[0].memoryUsage() == 0);
+}
+
+TEST_CASE("MemberProxy::memoryUsage()") {
+  JsonDocument doc;
+  REQUIRE(doc["hello"].memoryUsage() == 0);
+}

extras/tests/Deprecated/shallowCopy.cpp

@@ -0,0 +1,14 @@
+// ArduinoJson - https://arduinojson.org
+// Copyright © 2014-2025, Benoit BLANCHON
+// MIT License
+
+#include <ArduinoJson.h>
+#include <catch.hpp>
+
+TEST_CASE("shallowCopy()") {
+  JsonDocument doc1, doc2;
+  doc1["b"] = "c";
+  doc2["a"].shallowCopy(doc1);
+
+  REQUIRE(doc2.as<std::string>() == "{\"a\":{\"b\":\"c\"}}");
+}

extras/tests/FailingBuilds/CMakeLists.txt

@@ -1,48 +1,32 @@
 # ArduinoJson - https://arduinojson.org
-# Copyright © 2014-2022, Benoit BLANCHON
+# Copyright © 2014-2025, Benoit BLANCHON
 # MIT License
 
-macro(build_should_fail target)
+macro(add_failing_build source_file)
+	get_filename_component(target ${source_file} NAME_WE)
+
+	add_executable(${target} ${source_file})
+
 	set_target_properties(${target}
 		PROPERTIES
-	    	EXCLUDE_FROM_ALL TRUE
-	        EXCLUDE_FROM_DEFAULT_BUILD TRUE
+			EXCLUDE_FROM_ALL TRUE
+			EXCLUDE_FROM_DEFAULT_BUILD TRUE
 	)
 	add_test(
-		NAME
-			${target}
-	    COMMAND
-	    	${CMAKE_COMMAND} --build . --target ${target} --config $<CONFIGURATION>
-	    WORKING_DIRECTORY
-	    	${CMAKE_BINARY_DIR}
+		NAME ${target}
+			COMMAND ${CMAKE_COMMAND} --build . --target ${target} --config $<CONFIGURATION>
+			WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
 	)
-	set_tests_properties(${target} 
+	set_tests_properties(${target}
 		PROPERTIES
-			WILL_FAIL	TRUE
-			LABELS 		"WillFail;Catch"
+			WILL_FAIL TRUE
+			LABELS "WillFail"
 	)
 endmacro()
 
-
-add_executable(Issue978 Issue978.cpp)
-build_should_fail(Issue978)
-
-add_executable(Issue1189 Issue1189.cpp)
-build_should_fail(Issue1189)
-
-add_executable(read_long_long read_long_long.cpp)
-set_property(TARGET read_long_long PROPERTY CXX_STANDARD 11)
-build_should_fail(read_long_long)
-
-add_executable(write_long_long write_long_long.cpp)
-set_property(TARGET write_long_long PROPERTY CXX_STANDARD 11)
-build_should_fail(write_long_long)
-
-add_executable(delete_jsondocument delete_jsondocument.cpp)
-build_should_fail(delete_jsondocument)
-
-add_executable(variant_as_char variant_as_char.cpp)
-build_should_fail(variant_as_char)
-
-add_executable(assign_char assign_char.cpp)
-build_should_fail(assign_char)
+add_failing_build(Issue978.cpp)
+add_failing_build(read_long_long.cpp)
+add_failing_build(write_long_long.cpp)
+add_failing_build(variant_as_char.cpp)
+add_failing_build(assign_char.cpp)
+add_failing_build(deserialize_object.cpp)

extras/tests/FailingBuilds/Issue1189.cpp

@@ -1,13 +0,0 @@
-// ArduinoJson - https://arduinojson.org
-// Copyright © 2014-2022, Benoit BLANCHON
-// MIT License
-
-#include <ArduinoJson.h>
-
-// a function should not be able to get a JsonDocument by value
-void f(JsonDocument) {}
-
-int main() {
-  DynamicJsonDocument doc(1024);
-  f(doc);
-}

extras/tests/FailingBuilds/Issue978.cpp

@@ -1,5 +1,5 @@
 // ArduinoJson - https://arduinojson.org
-// Copyright © 2014-2022, Benoit BLANCHON
+// Copyright © 2014-2025, Benoit BLANCHON
 // MIT License
 
 #include <ArduinoJson.h>
@@ -8,6 +8,6 @@ struct Stream {};
 
 int main() {
   Stream* stream = 0;
-  DynamicJsonDocument doc(1024);
+  JsonDocument doc;
   deserializeJson(doc, stream);
 }