bobbycar-boardcomputer-firmware

How to clone ? (READ THIS OR YOU WILL FAIL)

git clone --recursive git@github.com:bobbycar-graz/bobbycar-boardcomputer-firmware.git
cd bobbycar-boardcomputer-firmware/
./esp-idf/install.sh
./switchconf.sh feedc0de

How to compile

Also do the initialization if you use an IDE, otherwise build will fail.

# before you try to build anything, always do this first:
. export.sh

# if needed, switch to the right configuration for your hardware (run with --list to list available configurations)
./switchconf.sh feedc0de

# flash bootloader, partition table and app (only do once)
idf.py -p /dev/ttyUSB0 -b 921600 flash monitor

# flash only app (do this for development as it is much faster)
idf.py -p /dev/ttyUSB0 -b 921600 app-flash monitor

if you are inside monitor, hit Ctrl+T then Ctrl+X to exit.

Hit Ctrl+T then Ctrl+A to reflash the app and return to monitor (very handy during development)

How to wire all connections?

-DFEATURE_DPAD

-DFEATURE_DPAD_3WIRESW

-DFEATURE_ROTARY