The target size ratio is currently always being set to 0, when
neither the legacy targetSizeRatio nor the parameter for
target_size_ratio are set. In this case, we should not set it to 0,
but rather should skip the command to set the target size ratio.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
(cherry picked from commit 938380734d)
currently if we disable the monitoring for rn,
it doesnt reset the status
Signed-off-by: parth-gr <partharora1010@gmail.com>
(cherry picked from commit 49c26dbfb0)
blocklisting IP can cause problems when the cleanup
job pod runs on the same host or gets the same ip
as that of the rbd client ip that is present in
the rbd status/watchers. instead of blocklisting
the whole ip of the node or the client blocklist
only the unique ip:nonce to allow the node to not
have any effect because of the cleanup job.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
(cherry picked from commit 5ae49cf7a0)
Enabling crush updates is false by default, and can be enabled
if set to true. The setting needs to be nullable in case
we need to differentiate between the value being set
to false or just not set, to know if the default should be
different. This is necessary for rook consumers who are
refererencing the pool struct and want to change the default,
rather than using rook's default value of false.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
(cherry picked from commit df49ca1247)
when the osd is created there is no need for
osd bootstrap keyring, so remove the keyring
and keyring file,
New keyring will be created if
new osd need to be provisoned
Signed-off-by: parth-gr <partharora1010@gmail.com>
(cherry picked from commit 794a232835)
Implement CephX key rotation for Rook's client.admin user.
Admin user rotation is risky, so this has been tested extensively both
in unit tests as well as by manually injecting failures during runtime.
In testing, all failures were able to be recovered by the recovery
routine.
A mutex is also added to help ensure that two simultaneous admin key
rotation processes cannot be running simultaneously for any given
namespace. The mutex is tested in unit tests, and it was verified during
runtime via manual testing.
Signed-off-by: Blaine Gardner <blaine.gardner@ibm.com>
(cherry picked from commit 7c33186e72)
When removeing CephBlockPool check first that related ceph pool is exist in cluster,
since it may be manually removed by mistake.
Related-Issue: #16328
Signed-off-by: Denis Egorenko <degorenko@mirantis.com>
(cherry picked from commit c9e0f89a8b)
rotate the client.rbd-mirror-peer key based on the cephxconfig.
Also update the cephxStatus in the cephcluster as well as the
mirrored cephblockpool.
Signed-off-by: Santosh Pillai <sapillai@redhat.com>
(cherry picked from commit ee0b137d75)
When a `CephBlockPool` defines `spec.erasureCoded.algorithm`, use it as
the erasure-code-profile plugin.
Until now, that parameter would have been ignored completely, and every
erasure-coded pool would use the same plugin as the `default`
erasure-code-profile (i.e. `jerasure`).
Note that using any algorithm other than `jerasure` or `isa` is likely
to fail given the current implementation, as different algorithm require
different sets of parameters, and those cannot be supplied by the
user.
Signed-off-by: Benoît Knecht <bknecht@protonmail.ch>
(cherry picked from commit d7f08693ed)
Creating the rgw admin user is taking on the order of two
minutes instead of the expected seconds, thus the command
was timing out and cause the object store user creation
to fail. The increased timeout allows the admin user creation
to complete, and other users to be created as well.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
This PR implements the CSI cephx key rotation feature,
which follows overlapping rotation for non-daemon keys.
Refer to the cephx rotation API from design PR 15915 for details.
Signed-off-by: subhamkrai <srai@redhat.com>
In case of RDR with multus, the file which contains peer
connection details need to generated on mgr proxy remote
since rbd commands in multus, commands are run via mgr
proxy container and not the rook operator pod.
Co-Authored-by: Madhu Rajanna <madhupr007@gmail.com>
Signed-off-by: subhamkrai <srai@redhat.com>
When force-deletion annotation is added to CephRadosNamespace CR, then
blocklist any watchers on the Namespace images in order to remove the
image from the trash
Signed-off-by: Santosh Pillai <sapillai@redhat.com>
There are image create,delete,map
and unmap functions added very long back
when Rook was supporting flex driver. As
we dont have support for it and Rook doesnt
create or map rbd images. Moving the dead
code from the repo.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
allow targetSizeRatio == 0
enforce targetSizeRatio >= 0 via +kubebuilder:validation
set targetSizeRatio and compressionMode="" if unset
remove IsTargetRatioEnabled() and IsCompressionEnabled()
Signed-off-by: Oded Viner <oviner@redhat.com>
This is the first implementation of CephX key rotation in Rook.
Adds key rotation API from design PR 15915.
Also add helper methods for rotating keys, determining when keys
need to be rotated, and for generating CephX key statuses. These will be
reusable for other Rook reconciles beyond object/RGW.
Signed-off-by: Blaine Gardner <blaine.gardner@ibm.com>
LeastUptodateDaemonVersion() unmarshals Ceph's daemon versions JSON
output into `map[string]<type>` maps which are not guaranteed to iterate
in the same order as output by Ceph. Fix this method to no longer assume
iteration order is the same order as Ceph's output.
Signed-off-by: Blaine Gardner <blaine.gardner@ibm.com>
This change cleans up and standardizes import statements across the Ceph operator code. It removes redundant or duplicate imports and reorganizes alias names for improved clarity and consistency. Additionally, the ST1019 exception was removed from .golangci.yaml now that the code complies with the rule.
Signed-off-by: Carlos Barria <cbarria@yahoo.com>
Refactored multiple conditional if-else blocks into switch statements to improve readability and maintainability. Also removed outdated staticcheck rule comments (QF1002, QF1003) from .golangci.yaml.
Signed-off-by: Carlos Barria <cbarria@yahoo.com>
there is a change from ceph on how the status
of the mirroring will look like,
Adopting with new fields so the status is correctly synced,
And other components might rely on the status too
Signed-off-by: parth-gr <partharora1010@gmail.com>
When a rados namespace is deleted, it cannot be purged
until its images and snapshots are deleted. Now a condition
is being added to the rados namespace CR status so the user
does not need to read the operator log to discover the cause.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
When the blockpool is deleted and there are images or
snapshots in the pool, the deletion is blocked by the
finalizer until they are all removed. The condition added
to the cephblockpool status only indicated if there were
radosnamespace dependencies. A new condition is now added
to describe if there are images or snapshots.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
Ceph uses uint64 (unsigned long) type for CephFS GID. Rook was using
int, which was causing failures when the GID overflowed Rook's type.
Update Rook's type to match Ceph's.
Signed-off-by: Blaine Gardner <blaine.gardner@ibm.com>
there was very edge case,a nd that result in nil
point exception
During osd upgrades if mirror health check is called
the mirror status cmd doesnt respond
So its important to check if the value exist
before getting its summary
Signed-off-by: parth-gr <partharora1010@gmail.com>
this commit add support for mirroring b/w implicit rados namespace and
defined rados namespace. To support this, rook will treat `<implicit>`
name on cephblockpool as `""` empty string. This will allow mirroring
b/w implicit and defined radosnamespace.
Signed-off-by: subhamkrai <srai@redhat.com>
One ore more OSDs can be down and PGs can still be active+clean (data
was rebalanced to other available OSDs). This PR sets
maxunavailable=1+downOSDs to allow one healthy to be drained.
Signed-off-by: Santosh Pillai <sapillai@redhat.com>
Implements #14733. Allows to set IDs of external mons to
Cluster CRD. Rook will not remove external mons from quorum
and will add external mon addresses to mon endpoints.
Use-case for external mon is to maintain quorum for 2-AZ
k8s cluster in case of zone outage.
Signed-off-by: Artem Torubarov <artem.torubarov@clyso.com>
If there are at least three OSDs on a single node, we should
treat it as a potential production cluster and perform
the ok-to-stop checks during reconcile. Otherwise,
it may cause instability during upgrades on
single-node clusters.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
this PR improves the error logging when ok-to-stop requests fail
in the Rook operator. Instead of only showing a generic exit status
Signed-off-by: Oded Viner <oviner@redhat.com>
This change refactors inline roundup code to a function
roundup_size_MiB that takes a size(in bytes) as argument and returns
the smallest number of Mibibytes larger than or equal to the given size.
Signed-off-by: Michael Adam <obnox@samba.org>
The ci was using a pretty old version og golangci-lint.
This updates to the latest version.
Additionally, it silences some
gosec integer conversion overflow false positves
and fixes some real errors of this category
and string format errors found by golangci-lint, while at it.
Co-authored-by: Blaine Gardner <b.blaine.gardner@gmail.com>
Co-authored-by: Travis Nielsen <tnielsen@redhat.com>
Signed-off-by: Michael Adam <obnox@samba.org>
if the import from the peer cluster doesnt
work, because of some reasons like
cluster health, network, etc
the import cmd stuck forever and which
forever stucks the blockppol reconcile
Signed-off-by: parth-gr <partharora1010@gmail.com>
enable and disable the status of rados namespace
mirroring by looking at statusCheck spec of blockpool
Signed-off-by: parth-gr <partharora1010@gmail.com>
The upgrade of the mds daemons pauses to wait for the
stopping of standby daemons before the filesystem upgrade
is completed. If there are multiple filesystems, there
could be standbys for other filesystems that will not be
stopped at the time of the upgrade of another filesystem.
Thus, the standbys may not upgrade and be stuck on the
previous version. Now, the standby upgrade will only wait
for standbys for the same filesystem.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
This is similar to #14052 we did for radosnamespace
and this is an extension to support cleanup
at the blockpool level to cleanup the images
and the snapshots in a pool.
Signed-off-by: Madhu Rajanna <madhupr007@gmail.com>
Modify the CR to allow mirroring of an rados namespace
to a differently named namespace on the remote cluster
1) enable rados namesapce mirroring only
if the blockpool mirrroing is enabled
2) disable blockpool mirroing only if
all the namesapce mirroing is disabled
if the rbd mirroring fails and ceph version is not supported
provide a error message with supported version details
and reason of failing
Signed-off-by: parth-gr <partharora1010@gmail.com>
Given that Ceph Quincy (v17) is past end of life,
remove Quincy from the supported Ceph versions,
examples, and documentation.
Supported versions now include only Reef and Squid.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
Travis Nielsen
parth-gr
Madhu Rajanna
Blaine Gardner
Denis Egorenko
Santosh Pillai
Benoît Knecht
subhamkrai
Oded Viner
Carlos Barria
Joshua Hoblitt
Artem Torubarov
Eng Zer Jun
Michael Adam
parth-gr