The exporter service and service monitor should not
be deleted if an individual daemon is being removed
from a node. As long as the exporter is enabled with
v18 and newer, the exporter service and service monitor
should exist. Clusters were seeing their metrics stop
collection when the exporter service and service monitor
would disappear, especially when multiple clusters are
configured.
Signed-off-by: travisn <tnielsen@redhat.com>
previous code was calling the following command to create the
dashboard user:
> ceph dashboard ac-user-create <username> -i <password-file>
this works the first time when the user doesn't exist, however subsequent
calls for example when the password has changed or when the secret was
deleted from k8s, will not take place as this command will succeeded
because the user already exists but the password is not updated in
this case. The fix consists in adding an explicit call to the command:
> ceph dashboard ac-user-set-password <username> -i <password-file>
which ensures the password is updated correctly in the access control db
Fixes: https://github.com/rook/rook/issues/13594
Signed-off-by: Redouane Kachach <rkachach@redhat.com>
we dont set removeMgrDaemonConfiguration to true unless all the
delete operations went successfull.
Signed-off-by: Redouane Kachach <rkachach@redhat.com>
this commit updates the name of network fence CR to
node name + driver name, which will allow the creation of
multiple network fence per drivers on the same node, and
modifies the unit test and deletion procedure for the
same.
Signed-off-by: Riya Singhal <rsinghal@redhat.com>
with controller runtime v0.17.0, fake client
set TypeMeta for unstructured only, for other
types we need to add TypeMeta.
Signed-off-by: subhamkrai <srai@redhat.com>
previously, the dashboard parameters supported by Rook were stored in the
daemon configuration section (mgr.X, for example). This differs from
Cephadm-based deployments, where all configurations are stored in the
global mgr configuration section. This variance could result in
configuration mismatches between the active and standby dashboards.
Furthermore, all Ceph dashboard documentation exclusively points to
the global mgr configuration section and makes no use of individual
daemons sections.
Fixes: https://github.com/rook/rook/issues/13577
Signed-off-by: Redouane Kachach <rkachach@redhat.com>
If migration of the OSDs is enabled, operator should wait
for the pgs to be clean after the all the OSDs have reconciled.
This will help add the exponential backoff for the operator
restarts when OSD migration is needed but PGs are still rebalancing the
data after last OSD migration.
Signed-off-by: sp98 <sapillai@redhat.com>
This commit uses an csi config map API exposed by Ceph-CSI.
This will reduce the efforts of keeping the configuration in
sync with Ceph-CSI.
Signed-off-by: Praveen M <m.praveen@ibm.com>
Since v18.2.1 is the default recommendation for the ceph version,
update all the docs and examples to that version.
Signed-off-by: travisn <tnielsen@redhat.com>
This implements the "Ceph Config via Ceph Cluster CRD" design document
as a `cephConfig:` structure on the CRD.
This also fixes the `yq` commands used to manipulate the
`cluster-test.yaml` that caused CI issues for this PR and potentially
unknowingly others.
Signed-off-by: Alexander Trost <galexrt@googlemail.com>
Fixes: #13167
Previously, the mgr did not honor the flag
ContinueUpgradeAfterChecksEvenIfNotHealthy
from the cluster spec. Only osd, mds, and rgw did.
To render the update behavior correct and complete across the daemons, this
change implements the honoring of the flag for the mgr.
Signed-off-by: Michael Adam <obnox@samba.org>
This commit adds new CSIDriverOptions section in
cephCluster CR. This section contains settings
for read affinity and kernel+fuse Mount options
These settings will be injected directly into
rook-ceph-csi-config cm to be applicable per
ceph cluster.
Signed-off-by: Rakshith R <rar@redhat.com>
Restarting the exporter using RollingRelease causes a race condition,
that results in exporter crashing and the ceph health to show a warning.
Signed-off-by: Divyansh Kamboj <dkamboj@redhat.com>
ceph dashboard uses radosgw-admin for certain tasks that
aren't accessible via the rgw REST API. Due to the absence of
a valid ceph.conf file at /etc/ceph/ceph.conf within the mgr pod,
radosgw-admin fails to operate, resulting in 500 errors across
various 'Object Gateway' views on the dashboard. This change
adds CEPH_ARGS environment variable to the mgr pod enabling
its propagation and utilization by the dashboard/radosgw-admin
for executing rgw commands.
closes: https://github.com/rook/rook/issues/13255
Signed-off-by: Redouane Kachach <rkachach@redhat.com>
This patch adds `pgHealthyRegex` field to DisruptionManagementSpec.
`pgHealthyRegex` is a regular expression that is used to determine which
PG states should be considered healthy. The default value of
`pgHealthyRegex` is:
^(active\+clean|active\+clean\+scrubbing|active\+clean\+scrubbing\+deep)$
which is effectively the same as before.
Signed-off-by: Ryotaro Banno <ryotaro.banno@gmail.com>
Similar to the ceph crash collector daemon that generates a keyring with more
restrictive privileges, the exporter should also generate and use a more limited keyring.
Signed-off-by: avanthakkar <avanjohn@gmail.com>
During certain maintenance tasks the admin will own running
operations on the ceph mgr, rgw, mds and rbd-mirror daemons
and the operator should not interfere with those operations.
Co-authored-by: gauravsitlani <gaurav.sitlani@live.com>
Signed-off-by: subhamkrai <srai@redhat.com>
when creating networkFence, rbd command was loading
admin config and hence running rbd command use client.admin
in case of external cluster also. With this commit instead
of client.admin user it will use what is being passed to
config.
Signed-off-by: subhamkrai <srai@redhat.com>
This reverts commit fab23d3407.
The mgr requires rw access for the cron job that collects
the crashes.
Signed-off-by: Travis Nielsen <tnielsen@redhat.com>
From the Go specification [1]:
"1. For a nil slice, the number of iterations is 0."
"3. If the map is nil, the number of iterations is 0."
`len` returns 0 if the slice or map is nil [2]. Therefore, checking
`len(v) > 0` before a loop is unnecessary.
[1]: https://go.dev/ref/spec#For_range
[2]: https://pkg.go.dev/builtin#len
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
Several messages were showing up in the operator log
more often than necessary, so let's change them to
debug level.
Signed-off-by: travisn <tnielsen@redhat.com>
Using the new configuration parameters prometheusEndpoint and
prometheusEndpointSSLVerify users can configure dashboard to
point to their prometheus instance.
closes: #12876
Signed-off-by: Redouane Kachach <rkachach@redhat.com>
travisn
Redouane Kachach
Riya Singhal
subhamkrai
sp98
Praveen M
Satoru Takeuchi
dependabot[bot]
Alexander Trost
Michael Adam
Rakshith R
Divyansh Kamboj
Ryotaro Banno
avanthakkar
gauravsitlani
parth-gr
Blaine Gardner
Eng Zer Jun
guoguangwu