* add dispatching of groups to light
* added ha device registry device id
* added zha group object
* add group event listener
* add and remove group members
* get group by name
* api cleanup
* clean up get device info
* create and remove zigpy groups
* clean up create and remove group api
* use device id
* use device id
* cleanup
* update test
* update tests to allow group events to flow
* Update tests with rangeValue and rangeValueDelta to use int.
* Add support for rangeValueDeltaDefault for covers.
* Update tests for range changes.
* Test for AdjustRangeValue with rangeValueDeltaDefault True.
* Update tilt error.
* Add OPNSense device_tracker
This commit adds a new component for using an OPNSense router as a
device tracker. It uses pyopnsense to query the api to look at the
arptable for a list of devices on the network.
* Run black formatting locally to appease azure
* Apply suggestions from code review
Co-Authored-By: Fabian Affolter <mail@fabian-affolter.ch>
* Fix issues identified during code review
This commit updates several issues found in the module during code
review.
* Update homeassistant/components/opnsense/__init__.py
Co-Authored-By: Fabian Affolter <mail@fabian-affolter.ch>
* Update CODEOWNERS for recent changes
* Fix lint
* Apply suggestions from code review
Co-Authored-By: Martin Hjelmare <marhje52@kth.se>
* More fixes from review comments
This commit fixes several issues from review comments, including
abandoning all the use of async code. This also completely reworks the
tests to be a bit clearer.
* Revert tests to previous format
* Add device detection to opnsense device_tracker test
This commit adds actual device detection to the unit test for the setup
test. A fake api response is added to mocks for both api clients so that
they will register devices as expected and asserts are added for that.
The pyopnsense import is moved from the module level to be runtime in
the class. This was done because it was the only way to make the
MockDependency() call work as expected.
* Rerun black
* Fix lint
* Move import back to module level
* Return false on configuration errors in setup
This commit updates the connection logic to return false if we're unable
to connect to the configured OPNsense API endpoint for any reason.
Previously we would not catch if an endpoint was incorrectly configured
until we first tried to use it. In this case it would raise an unhandled
exception. To handle this more gracefully this adds an api call early in
the setup and catches any exception raised by that so we can return
False to indicate the setup failed.
* Update tests
* Add pyopnsense to test requirements
* Rerun gen_requirements script
* Fix failing isort lint job step
Since opening the PR originally yet another lint/style checker was added
which failed the PR in CI. This commit makes the adjustments to have
this pass the additional tool's checks.
* Fix comment
* Update manifest.json
Co-authored-by: Fabian Affolter <mail@fabian-affolter.ch>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
Co-authored-by: Pascal Vizeli <pascal.vizeli@syshack.ch>
* Fix light.turn_on for emulated_hue
HarmonyHub sends `{'xy': [0, 0], 'on': True, 'bri': 0}` when turning on lights that do not support brightness control. Unfortunately current logic always uses brightness value to control on/off state which makes no sense for lights that don't support brightness at all. This change fixes that behavior, making light without brightness control usable with HarmonyHub and probably some other remotes.
* Test 'no_brightness' lights
* Update entity.py
* Fix Black
* Fix Black
* Update entity.py
* Use new style python
* Simplify
* Allow multible attribute with different channels
* Black
Co-authored-by: Pascal Vizeli <pascal.vizeli@syshack.ch>
* Add SSLError check and remove log spam
* Update homeassistant/components/proxmoxve/manifest.json
remove unnecessary requirement
* Remove log level change
Moved to proxmoxer library
* Update homeassistant/components/proxmoxve/__init__.py
* Update manifest.json
Update to new version of dependency which fixes log issue
* Run formatter and requires updates
* oops, tabs
* Fix quote marks
When you can't get black running, just fix whatever CI says is wrong!
* Track if request is local
* Cancel early if 2FA disabled
* Allow disabling 2FA for ack
* Do not mark devices with 2FA as reachable
* Add request source to GA events
* Webostv: add sound_output capability
Add the ability to read and set the sound_output
* Webostv: add sound_output capability
* Webostv: add sound_output capability
* fix blank spaces
* fix to long line
* add ,
* Import ATTR_SOUND_OUTPUT
Do not have the ability to test this change right now
* Add white space
* Create const.py
* Use const import
* Use import from const.py
* Add docstring
* Change order
* Change order
* Fix import
* Fix import
* Fix typo
* Change order again
* Change order again
* Change order of attributes
* use hapid as unique_id for config_entry of HomematicIP Cloud
* Add qualita_scale to manifest
* Update config_flow
* use core interface for config_flow tests
* refactor to fail earlier
* use asynctest
* rewrite tests
* rewrite tests
* fix test
* add assert
* Import constants sanely
* Linting
* Rename data constants for consistency
* Refactor RainMachine switch platform
* Comments
* Cleanup
* Refactor switch and sensor API calls to be separate
* Linting
* Make sure zones are updated in appropriate service calls
* Correctly decrement
* Linting
* Don't do weird inheritance
* Ensure service calls update data properly
* Docstring
* Docstring
* Errors can be logged without string conversion
* Code review comments
* Make the set_runtime_value_int function work with template values
* Use newest version of the ihcsdk library
* Make the set_runtime_value_int function work with template values
* Use newest version of the ihcsdk library
* Updated to the newest ihcsdk 2.5.0
* Formatted changes to make it pass CI tests
* Make SimpliSafe integration more resilient to SimpliSafe cloud issues
* Clear emergency refresh token
* Stop listening when appropriate
* Cleanup
* Saving refresh token should happen after all updates
* Code review
* Rewrite of Spotify integration
* Update homeassistant/components/spotify/config_flow.py
Co-Authored-By: Paulus Schoutsen <balloob@gmail.com>
* Remove configurator dependency
* Strip whitespace from device model in case Spotify product is missing
* Ensure domain dict exists in hass data on setup entry
* Simply config validation for client id and secret
* Abort flow on any exception from spotipy
* Add tests for config flow
* Gen requirements all
* Add test package __init__
* Remove Spotify from coveragerc
* Made alias handling more robuust
* Fix supported_features for Spotify free and open accounts
* Improve error message in the logs
* Re-implement Spotify media_player
* Change media content type when play a playlist
* Process review suggestions
* Move Spotify init, static current user and supported_features
* Remove unneeded me call
* Remove playlist content type due to frontend issues
* Improve playlist handling, when context is missing
* Handle entity disabled correctly
* Handle being offline/unavailable correctly
* Bump Spotipy to 2.7.1
* Update coverage RC, mark integration silver
* Remove URI limitation, lib supports all Spotify URI's now
* Final cleanup
* Addresses Pylint error
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Update Hue existing config entry with discovery data
* Updated method documentation comments
* Update implementation to match latest dev
* Use named argument for clarity
* Buienradar Camera for Belgium
* Voluptuous check for country code
* Black formatting
* Testing for Buienradar Belgium
* Changed MULTIPLE CHOICE variable name
* Changes from frenck review
* remove connection check during setup since it is already done during config flow
* revert change and fix log message
* demote connection setup to warning
* upgrade to aiopylgtv 0.3.0 and corresponding simplification and cleanup of webostv state tracking
* properly handle case where Live TV is not reported in list of apps
* fix tests (entity state is no longer linked to source id)
* fix pylint checks
* avoid unnecessary retrieval of channel list
* use only standard home assistant states
* add missing tests
* readd removed test
* add zeroconf discovery support for vizio integration
* no mock_coro_func needed
* add reasonable timeout and don't log exceptions from pyvizio due to timeout
* add test to test options update and bump pyvizio to avoid timeout issues
* update requirements_*
* fix gaps in coverage
* change return hint for async_setup_entry
* use source variables instead of strings
* only get unique ID if about to create entry
* update based on review
* Revert "update based on review"
This reverts commit 0d612a90eb7d02c92061f902973e527267e3110a.
* f-string
* fix last review
* revert cleanup changes to simplify PR
* remove unnecessary ConfigFlow object variables to simplify logic
* revert cleanup changes to make review easier, noted for future cleanup
* revert cleanup changes to make review easier, noted for future cleanup
* move zeroconf service type constant to test module
* enhance zeroconf service info decoding to include raw bytes
* Update homeassistant/components/zeroconf/__init__.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* fix test based on last commit
* fix test based on last commit
* remove .keys() when asserting processed and raw service info properties
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Iteration on issue and PR templates
* Some small improvements to make it look better in the PR editor
* Better English
* Please keep template
* Consistency
* Adds www to website link, to make more clear it is our website
* Process review suggestion by Martin
* Added dep bump as type of change
* English
* support xiaomi miio sensor: cgllc.airmonitor.s1 & cgllc.airmonitor.b1
* support xiaomi miio sensor: cgllc.airmonitor.s1 & cgllc.airmonitor.b1
* rollback sensor, modify air_quality
* only set air_quality props
* remove set state from "zhimi.airmonitor.v1"
* unit_of_measurement return None when the pm25 isn't reported
* import libs by isort
* Improve sensor for automations
I've updated the sensor so that departure time and delay can be used in automatons.
Before, the departure time and delay time were only available wrapped in strings which makes it difficult to use them in automations. Using the extra attributes, one can easily use them in automations.
* Update homeassistant/components/nmbs/sensor.py
Co-Authored-By: springstan <46536646+springstan@users.noreply.github.com>
* Updates based on review
Changed min to minutes as requested
Co-authored-by: springstan <46536646+springstan@users.noreply.github.com>
* create derivation component
based on integration component
remove left and right
* Update test
(was'n saved)
* add some functionnal point test
* Change derivation to derivative
* Continue migration from derivation to derivative
* Add codeowners info
* fix tests typo and values
* Improve code from reviewer
add test case
fix test values
still a prefix issue that should not
* create derivation component
based on integration component
remove left and right
* Update test
(was'n saved)
* add some functionnal point test
* Change derivation to derivative
* Continue migration from derivation to derivative
* Add codeowners info
* fix tests typo and values
* Improve code from reviewer
add test case
fix test values
still a prefix issue that should not
* Update homeassistant/components/derivative/sensor.py
Fix test issue with unit of measurement
Co-Authored-By: Santobert <tobhaase@gmail.com>
* Fix review
Move ValueError to SyntaxError
* precise state test
* un comment original tests and remove error tests
* Fix isort issue
* Fix review
- update doc link
- migrate to general const import
* Rollback import conf_unit, just defined localy
Co-authored-by: Santobert <tobhaase@gmail.com>
* Add foundation for integration services
* Fix tests
* Remove async_get_platform
* Migrate Sonos partially to EntityPlatform.async_register_entity_service
* Tweaks
* Move other Sonos services to media player domain
* Move other Sonos services to media player domain
* Address comments
* Remove lock
* Fix typos
* Use make_entity_service_schema
* Add area extraction to async_extract_entities
Co-authored-by: Anders Melchiorsen <amelchio@nogoto.net>
* Improve config entry support, add device info
* async_dispatch_connect
* Fix I/O in event loop
* Do not raise PlatformNotReady inside dispatcher
* Make main discovery process async
* Do discovery as part of set up.
* Greatly simplify set up
* Add parallel updates to fan&switch
* mini cleanup
* Address comments
* Improve config entry support, add device info
* async_dispatch_connect
* Fix I/O in event loop
* Do not raise PlatformNotReady inside dispatcher
* Make main discovery process async
* Do discovery as part of set up.
* Greatly simplify set up
* Add parallel updates to fan&switch
* mini cleanup
* Address comments
* Improve config entry support, add device info
* async_dispatch_connect
* Fix I/O in event loop
* Do not raise PlatformNotReady inside dispatcher
* Make main discovery process async
* Do discovery as part of set up.
* Greatly simplify set up
* Add parallel updates to fan&switch
* mini cleanup
* Address comments
* Minor enhancement to jewish_calendar:
- Expose more halachic times from the underlying hdate module
- Correct and standardize some transliterations
* Undo breking name change
* Add icon for talit time
Co-authored-by: Andrew Marks <52414333+amarks-coatue@users.noreply.github.com>
* use media player defined device classes instead of custom ones, add options flow test, add timeout options parameter
* make options update error more generic
* fix config flow options update logic
* simplify logic for options update during import
* use platform list for load and unload
* update private config flow function name and description
* fix grammar in strings.json
* update mock config variable names to be more accurate
* remove timeout conf option, create device_class property
* update requirements
* update .coveragerc to indicate that config_flow has tests
* fix source of device_class property and move constants to const.py
* fix grammar in error message
* remove redundant device check in async_setup_entry since device connection is checked during config flow
* revert change to async_setup_entry, raise ConfigEntryNotReady if device can't be connected to
* update error text
* add more context to error text
* Refactor input_datetime.
Keep the state as datetime, but format accordingly to has_time and
has_date.
* Use config dict for input_datetime.
* Add tests.
* Lint
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* add config flow support, device registry support, available property
* raise PlatformNotReady if HA cant connect to device
* remove test logging statement and fix integration title
* store import and last user input values so user can see errors next to value that caused error
* add PARALLEL_UPDATES
* add missing type hints
* add missing type hints to tests
* fix options config flow title
* changes based on review
* better key name for message when cant connect
* fix missed update to key name
* fix comments
* remove logger from test which was used to debug and update test function names and docstrings to be more accurate
* add __init__.py to vizio tests module
* readded options flow and updated main component to handle options updates, set unique ID to serial, fixes based on review
* pop hass.data in media_player unload instead of in __init__ since it is set in media_player
* update requirements_all and requirements_test_all
* make unique_id key name a constant
* remove additional line breaks after docstrings
* unload entries during test_user_flow and test_import_flow tests to hopefully reduce teardown time
* try to speed up tests
* remove unnecessary code, use event bus to track options updates, move patches to pytest fixtures and fix patch scoping
* fix comment
* remove translations from commit
* suppress API error logging when checking for device availability as it can spam logs
* update requirements_all and requirements_test_all
* dont pass hass to entity since it is passed to entity anyway, remove entity unload from tests, other misc changes from review
* fix clearing listeners
* use config_entry unique ID for unique ID and use config_entry entry ID as update signal
* update config flow based on suggested changes
* update volume step on config import if it doesn't match config_entry volume step
* update config_entry data and options with new volume step value
* copy entry.data and entry.options before updating when updating config_entry
* fix test_import_entity_already_configured
* Store last working HTTP settings
* Add safe mode
* Fix tests
* Add cloud to safe mode
* Update logging text
* Fix camera tests leaving files behind
* Make emulated_hue tests not leave files behind
* Make logbook tests not leave files behind
* Make tts tests not leave files behind
* Make image_processing tests not leave files behind
* Make manual_mqtt tests not leave files behind
* Added custom validator function for speed list
* Replace CONF_SPEED_STATE_TOPIC with CONF_SPEED_COMMAND_TOPIC to determine SUPPORT_SET_SPEED
* Revert "Added custom validator function for speed list"
This reverts commit f000396fa6.
* Replace CONF_OSCILLATION_STATE_TOPIC with CONF_OSCILLATION_COMMAND_TOPIC to determine SUPPORT_OSCILLATE
* Support color light with nightlight
* Better nightlight mode support check
* Lint fixes
* Remove brightness control for color light with nightlight mode
* Updated NSAPI to version 3.0.0
* Fixed code style error
* Restructured API access
* Improved construction of attributes
* Fixed handling of API output
* Added @YarmoM as code owner
* Updated CODEOWNERS
* Reverted changes for full backwards compatibility
* Fixed bad conditional
* Simplify conditional
* Make met config flow tests more robust
* Fix test with default form values
* Remove not needed test
* Clean create entry test
* Clean double test
* Clean last tests
* Fix docstring
* ZHA cover device support
* flake8
* flake8, black
* isort
* pylint
* more test
* use zigpy provided functions
* black
* handle command errors, better state handling
* black
* more test
* lint
* Update ZHA cover tests coverage.
Co-authored-by: Alexei Chetroi <lexoid@gmail.com>
* Refactor to use ids in data class
* Use station_id
* Refactor Netatmo to use oauth
* Remove old code
* Clean up
* Clean up
* Clean up
* Refactor binary sensor
* Add initial light implementation
* Add discovery
* Add set schedule service back in
* Add discovery via homekit
* More work on the light
* Fix set schedule service
* Clean up
* Remove unnecessary code
* Add support for multiple entities/accounts
* Fix MANUFACTURER typo
* Remove multiline inline if statement
* Only add tags when camera type is welcome
* Remove on/off as it's currently broken
* Fix camera turn_on/off
* Fix debug message
* Refactor some camera code
* Refactor camera methods
* Remove old code
* Rename method
* Update persons regularly
* Remove unused code
* Refactor method
* Fix isort
* Add english strings
* Catch NoDevice exception
* Fix unique id and only add sensors for tags if present
* Address comments
* Remove ToDo comment
* Add set_light_auto back in
* Add debug info
* Fix multiple camera issue
* Move camera light service to camera
* Only allow camera entities
* Make test pass
* Upgrade pyatmo module to 3.2.0
* Update requirements
* Remove list comprehension
* Remove guideline violating code
* Remove stale code
* Rename devices to entities
* Remove light platform
* Remove commented code
* Exclude files from coverage
* Remove unused code
* Fix unique id
* Address comments
* Fix comments
* Exclude sensor as well
* Add another test
* Use core interfaces
* Use collections for input_number.
* Add tests.
* Typo fix.
* Make editable a public attribute.
* Move async_setup to top.
* Update homeassistant/components/input_number/__init__.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* Update homeassistant/components/input_number/__init__.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* Cleanup.
* async_write_ha_state()
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* add device_info property and move component to async
* use new VizioAsync class to have proper async support
* remove hass from VizioDevice init since it is not needed
* update requirements_all
* missed type hint
* updates based on review
* pyvizio version bump
* additional fixes based on review
* mistake in last commit
* remove device_info property because it can't be used unless this integration has config flow support
* Added preset scheduling to radiothermostat. Added alternate scheduling & religious scheduling to climate/const.py
* Fix Flake8 Errors in climate.py
* Fixing more flake8 errors in climate.py
Removed duplicate set_preset_mode def
* Fixed more flake8 errors.
Please be the end of these errors.
* Fixed black formatting
* Fixed black, broke flake8, fixed flake8
* Fixed CODE_TO_FAN_STATE black error
* Fixed isort issues
* Local isort broke black formatting
Docs should run isort before black. Default isort will undo certain black formatting.
* Removed last commas from imports
* Added removed line
* Fixed formatting
Hopefully this is what the CI pipeline is looking for.
* Ran isort from git repo root, utilizing setup.cfg.
* One more try
* fixed added definition and fixed logger string
* fixed formatting
* lost a close-paren
* Update const.py
Removed radiotherm specific presets
* Update climate.py
Moved preset definitions into radiotherm climate.py
* added update listener if max_age is set
* remove commented out code
* streamline test code
* schedule next update based on the next state to expire
* fixed update process
* isort
* fixed callback function
* fixed log message
* removed logging from test case
* Add boundary name to state if it exists
If the robot is cleaning a pre defined area with a name, add the name to the state-attribute.
* Reformat patch
* Removing whitespace
* Even more formatting
That black did not catch on first run...
* Added support for template alarm panel
* Rewrote tests in new async format
* Fix stale docstring
* Update to tests, standardization on NAME vs FRIENDLY_NAME
* Steam Online: Add last_online and Level attributes
* Steam Online: Add last_online and Level attributes
* Fixes from comments on initial pull request
* Push attributes only if they are not None
* Split async_update
* Use pytest parameters to avoid duplicate code
* Fix UnboundLocalError
* Test error rendering for template state
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* move constants, move schema validation to init, prepare for zeroconf/config flow
* mistake in refactor
* update .coveragerc, move validate_auth to __init__, only attempt to get ESN if device setup is validated
* fix schema validation
* remove suppress warning config option
* remove config_flow from manifest since its not ready yet
* update requirements_all.txt
* fix issue with merge conflict
* Refactor input_boolean to use config dict for instantiation.
* Refactor input_boolean to use YamlCollection.
* Add storage collection to input_boolean.
* Update homeassistant/components/input_boolean/__init__.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* Doh.
* Address comments.
* Add editable device state attribute.
* Clean up entities from entity registry on removal.
Reload yaml from correct source.
* Add tests.
* Update homeassistant/components/input_boolean/__init__.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* Don't reset entity state on updates.
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* move constants, move schema validation to init, prepare for zeroconf/config flow
* update requirements_all and make setup validation more pythonic
* mistake in refactor
* un-revert change from previous PR
* rename schema var
* update .coveragerc, move validate_auth to __init__, only attempt to get ESN if device setup is validated
* reinstate validate_setup but change logic to use new connection test function
* fix schema validation
* simplify string empty check logic
* missed commit
* Initial implementation
* Passing autobypass parameter to constructor, as suggested
* Black formatting
* Removed default value from autobypass parameter of the constructor, as it's redundant
* Add pilight dimmer as light component
* fix CI errors
* fix missing new lines
* improve formatting and addresses comments of @springstan
* rename config parameter and remove super() call to match pylint
* import only used constants of the pilight component
* Add myself to the code owners
* fix CODEOWNERS
* Add tests
* Add FileSync test
* Fill in services.yaml for 'androidtv.adb_filesync' service
* Update example paths in services.yaml
* Bump androidtv to 0.0.37
* Bump androidtv to 0.0.37
* Bump androidtv to 0.0.37
* Import LockNotAcquiredException
* Import LockNotAcquiredException from androidtv.exceptions
* Rename 'host' to 'address'
* Add a logging statement when an ADB command is skipped
* Check hass.config.is_allowed_path(local_path)
* Add return
* Fix pylint
* Reduce duplicated code (AndroidTVDevice vs. FireTVDevice)
* Split 'adb_filesync' service into 'download' and 'upload' services
* Don't use '.get()' for required data; return if the services are already registered
* Replace "command" with ATTR_COMMAND
* Don't try to connect to a device if it is a duplicate
* add surepetcare
* cleanup
* remove unused imports and comments
* remove comment
* fix bug which prevented updating the sensors
* improve config validation
* fix voluptuous usage
* fix format & credential storage
* various fixes to hass-conform
* small format fixes
* change False to None
* still trying to be hass-conform
* remove unused class
* fix imports
* fix f-string
* add guard clause?!
* central data fetch
* do not pass in hass, will be provided automatically
* make the linters happy
* disable constant-test warning and add commas
* worksforme
* fix link in manifest
* remove icon
* bump surepy to 0.1.5
* worksforme
* small doc fixes
* add discovery_info guard
* result of another awesome review
* and again :)
* exclude surepetcare in .coveragerc
* Add LED control
* Bump python-velbus library to 2.0.35
To have LED control available in library
* Apply black formating
* Fix no-else-return pylint error
* Changed to f-string and more dry code
* Rewrite turn_on for LED control
* Preserve new BLE device name if one seen before the last scan but not on it
* Save an indented else block
* Use async_fire_time_changed and mock_device_tracker_conf in tests
* Migrate automatic tests from coroutine to async/await
* Remove unneeded side effect
* Replace unittest with asynctest, add additional asserts to tests
* add unique id property for Vizio devices so they get added to entity registry
* update requirements
* small change to make code more readable
* update to use f-string for consistency
* fix property name
* set unique_id to none if serial number couldnt be found
* set unique_id to none
* ESN should be globally unique so no device type needed. pyvizio will set ESN to None if ESN is unobtainable
* Simplify media player source list
Google don't need a whitelisted set of modes anymore. So let's just forward any mode that we have.
* Report current mode with the setting name, not a synonym
* Refactor mode generation to support other modes
* Support sound mode as mode as well
* Adjust failing test now with sound modes
* Make sure first poll happens after sub-platforms are loaded and entities are created.
* Function dosn't need to return anything
* Don't forward entry if already forwarded it
* Don't expose flows that aren't initialised.
If a flow init does not return immediately then there is a window where our
behaviour is screwy:
* Can try to configure a flow that isn't ready
* Can show notifications for discoveries that might yet return an abort
This moves the flow discovery events and notifications to after the flow is
initialised and hides flows that don't have a cur_step from async_progress
* Fix tradfri test
* Black.
* Lint fixes
* add KEF speakers platform for the integration
This will work with the KEF LS50 Wireless and KEF LSX speakers.
The development of this code happened on https://github.com/basnijholt/media_player.kef
* rename DATA_KEF -> DOMAIN
* use aiokef v0.2.0 and support LSX and new features
* sort imports
* fix @MartinHjelmare's suggestions
* remove _CONFIGURING
* change STATE_UNKNOWN to None
* use lat and long for unique_id
* bump aiokef to v0.2.2
* use config[ATTR] instead of config.get(ATTR)
* use getmac
* fix case when MAC is None
* use host as instance lifetime id
* fix requirements
* HomeKit: update position state characteristic for covers
position state is a mandatory characteristic for HK window coverings
* Test position state characteristic
Convert values to integer if rounding precision is zero. With that a
value which is an integer before filtering can be configured to stay
integer when using precision = 0. This also aligns behavior of filters
to how rounding behaves in tempaltes (homeassistant/helpers/template.py,
function forgiving_round).
* Use config entry unique id
* Clean up
* Backwards compatiblity note
* Fix some of Balloobs comments
* Bump dependency to v66
* Black somehow missed config flow tests...
* Move set unique ID til after possibility to update existing entry
* Add SUPPORT_STREAM to supported_features.
* Implement stream_source with channel RTSP URIs.
* Add Tests for Stream Support.
* Make stream_source async.
* Removed unused import.
* Re-wrote test to remove warning, and lint error.
* Add generic command functionality to denonavr
* add minimal unit tests for denonavr
* fix import order
* simplify denonavr unit test
* handle domain specific service calls with dispatcher
* update unit tests
* update unit tests
* remove unnecessary return value
* fix handling of mock instances in unit tests
* migrate webostv to new aiopylgtv version of the library and add support
for generic commands, input/button commands, and callback state updates
* update requirements
* cleanup and bump aiopylgtv version
* update webostv unit tests
* make webostv unit tests work with python 3.7
* cleanup for code checks
* cleanup and code review
* make all client request functions coroutines
* make host required for webostv configuration
* remove generic command and button functionality plus related cleanup
* fix previous track function
* update unit tests
* fix imports for unit tests
* update unit test
* further unit test updates
* remove unnecessary setup call in unit tests
* restore previous behaviour with client key config file in hass configuration directory
* Refactor ZHA component tests fixtures.
* Add tests for ZHA device discovery.
* Refactor ZHA registry MatchRule.
Allow callables as a matching criteria.
Allow sets for model & manufacturer.
* Minor ZHA class registry refactoring.
Less cluttered strict_matching registrations.
* Add entities only if there are any.
* Migrate rest of ZHA platforms to ZHA registry.
* Pylint fixes.
* Update lock.py
Allow different command and state topic + different command and state values.
* Formatting updated after black run
* TC updated to reflect different state & cmd values
* Abbreviations for lock states added
* additional non-default state test
* whitespaces fixed
* black formatting run
* [solaredge] Reduce Severity of Log Line
This log error happens frequently for some sites, but it shouldn't be an error.
It is expected, per the SolarEdge Monitoring API, that some sites do not
support this information, and the expected result is that this would be
empty (see comments on #27959).
Fixes#27959
* Fix a typo
Co-authored-by: Fabian Affolter <mail@fabian-affolter.ch>
* Added support for Somfy RTS wireless power socket and
Somfy Temperature Sensore Thermos Wirefree io
* Added code formatting fixes for commit 5faaf9c
* added support for RollerShutterRTSComponent from Somfy
* Added support for RTS roller shutter in set_cover_position
* Add support for Somfy RTS power socket and Somfy io temperature sensor
* black and isort fixes
* homematic: Add host port config for HMIP-only CCUs
When adding a host (CCU) to the homematic component currently the hardcoded port 2001 is used to communicate with it.
However that port is only available on the target if the target supports HM (wireless) protocol which is not the case e.g. for
the Hass.io Homematic CCU addon when running in HMIP-only mode with the HMIP-RFUSB stick.
This allows to change the port home assistant uses to talk to the CCU in order to provide services under hte homematic homain, e.g. homematic.set_variable_value
The default value for this option is the old hardcoded value this the change should be backwards compatible with existing configurations.
* Change style of config retrieval
* Added localip component
* Split config and core logic, and migrate to sensor platform (requested by @MartinHjelmare)
Also allow overriding the sensor name via the config
* Tweak docstring
Co-Authored-By: Fabian Affolter <mail@fabian-affolter.ch>
* Initial support for config entries
* Rename localip to local_ip (1/2)
* Rename localip to local_ip (2/2)
* Add test for config_flow
* Split and rename tests
* Remove unneeded code from config_flow
* Implement configuration as config entry import. Other misc requested changes from code review.
* Fix tests
* minor code review fixes
* remove unneeded code
Co-authored-by: Fabian Affolter <mail@fabian-affolter.ch>
* Store capabilities and supported features in entity registry
* Restore states at startup
* Restore non-disabled entities on HA start
* Fix test
* Pass device class from entity platform
* Clean up restored entities from state machine
* Fix Z-Wave test?
* fix handling of symlinked device decriptors
* make check for symlinked paths more efficient
* make variable names pylint compliant
* move sync io during setup and device connect/disconnect to executor thread pool
* move remaining sync io during setup to executor thread pool
* remove unnecessary lambda functions
* Added support for Somfy RTS wireless power socket and
Somfy Temperature Sensore Thermos Wirefree io
* Added code formatting fixes for commit 5faaf9c
* added support for RollerShutterRTSComponent from Somfy
* Added support for RTS roller shutter in set_cover_position
* added support for enocean window handle FA 10 00 (Hoppe)
* removed spaces in empty lines
* removal of rawdata attribute / code style
* isort fix
* PyLint fixes
* Improvements after review suggestions: rename device class to sensor type to avoid ambiguousness
* added import for DEVICE_CLASS_POWER from const.py
* removed window handle unit
* Pull track position from MPD status()
This allows the progress bar to work when using the media-control card in lovelace.
* Actually commit flake8 fix!
* Extra documentation.
Mainly to trigger CI rerun.
* Updated to use self._media_position
* Add support for HobbyBoards sensors: Hub, Humidity, Moisture, PulseCounter
Add support for an owserver running on a remote host
* Cleanup and fixes for style/etc
* Forgot to convert to f-strings.
* Update with changes requested by @MartinHjelmare
* Pylint
* Fix to None
* Reverse logic for hobbyboard test to eliminate pylint complaint
* Modified manifest to list myself as codeowner
* Move some functions down into OneWireProxy instead of the top OneWire
* Oops, missed some decode()'s
* And another!
The number of total blocks is always a round number. There can't be .1 or .11 blocks for example. The output is now always formatted with two decimals that are always 00.
* Add support for input_number entities
* Update homeassistant/components/alexa/capabilities.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* Removed get methods to directly access required attributes dicts.
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* fixed parsing of current to float in service set_current
* Added optional name in the config file in order to get a better entety naming (easier to find)
* fix parsing of all parameters to service calls
* addressed code review comments + updated pypi dependency
* config name imported from cont.py + minor naming changes to be more clear about the meaning of a sensor
* removed name in config again, use product name gathered from the charging station instead
* implemented suggested changes
* changed variable naming as requested
* Mechanism to rediscover a discovery that was ignored
* Add core config entry tests for new rediscover step
* Add tests for homekit_controller implementation of async_step_rediscover
* Rename rediscover to unignore
* Comment the new ignore/unignore mechanisms
* fix binary sensor offline/online
fixed self._handle_update on line 66 to produce args, kwargs.
Updated the binary sensor to check the correct index in the tuple.
* Fixed Standby switch
Set standby switch to poll in order to get status when homeassistant starts up.
Updated the index for the switch to get the status from the tuple.
* Fix imports so it works in custom_components
* Rework tado component
* Code cleanup
* Remove water_heater
* Address pylint warnings
* Remove water_heater from components
* Raise PlatformNotReady when we couldn't connect
* Revert PlatformNotReady since we are not a platform
* Add debugging information
* Add fallback setting
* Import with relative path
* Address race condition
* Cleanup
* Catch 422 Errors and log the real error
* Use async_schedule_update_ha_state to update the entities
* Forgot the True
* Include all SSDP data in discovery info
* Use UPnP device description as discovery info, inject some SSDP attrs
* Clean up attribute names
* Adapt existing SSDP flows to changed attribute names
* Prefix all SSDP UPnP attribute name constants with ATTR_UPNP, tweak a bit
* Make name customizable for nmbs live sensors
* Change order of the live name
* Added unique id to live nmbs sensor
* Revert changing the name of the live sensor
* Refactor capabilityResources object into class.
Implement semantics object to support open, close, raise, lower utterences.
Replace covers PercentageController with RangeController.
Add semantics for covers.
Remove PowerController for covers.
Add new display categories.
Add new items to Alexa Global Catalog.
Implement garage door voice PIN code support though Alexa app.
Fixed bug with getting property for ModeController.
Fixed bug were PercentageController AdjustPercentage would exceed 100.
* Comment fixes in Tests.
* Reorder imports.
* Added additional tests for more code coverage.
* Added and additional test for more code coverage.
* Explicitly return None for configuration() if not instance of AlexaCapabilityResource.
* Add unit_of_measurement to various Transmission sensors
Without unit_of_measurement, the history graph card will not show those sensors as line chart.
* Change Counts to Torrents.
This brings back support for Z-Wave thermostats
of SETPOINT_THERMOSTAT specific device class.
Such devices don't have COMMAND_CLASS_THERMOSTAT_MODE
and are now handled separately.
* Fix https://github.com/home-assistant/home-assistant/issues/29853
* Run script.gen_requirements
* Update to store Token File in config directory
* Update to store Token File in config directory
* Update to store Token File in config directory
* fix binary sensor offline/online
fixed self._handle_update on line 66 to produce args, kwargs.
Updated the binary sensor to check the correct index in the tuple.
* Fixed Standby switch
Set standby switch to poll in order to get status when homeassistant starts up.
Updated the index for the switch to get the status from the tuple.
* Update manifest.json
Updated sensor to use the latest version of the API to be able to use the new features.
* Updated sensor to use new API features. Configurable credentials and Inverter last reported date.
* EnvoyReader is passed to Envoy uses async update()
* Fixed pydocstyle warnings
* Fixed merge issue. Had extra variable.
* Added warning message when authentication for Inverter data fails
* Added continue after exception for loop
* Moved if statement outside of try/except
* Removed unneeded boolean attribute
The Fibaro FGR-222/FGRM-2222 ZWave roller shutter devices have a proprietary
command class to support setting the tilt angle of venetian blinds (= type of
window cover). This PR adds the support to HA for this. This allows the user to
set the height of the blinds and the tilt angle separately.
Original patch by @ChristianKuehnel #24405.
* Making tplink light more responsive.
* Adding light platform tests.
* Addressing PR feedback.
* Mocking the module, not the api.
* Using sync method for background update.
* Show current effect in yeelight device
* Use device_state_attributes instead of state_attributes
* Add early return in set effect
* Make single if elif chain
* Fix if elif
* Fix if elif
* Add unique ID to config entries
* Unload existing entries with same unique ID if flow with unique ID is
finished
* Remove unused exception
* Fix typing
* silence pylint
* Fix tests
* Add unique ID to Hue
* Address typing comment
* Tweaks to comments
* lint
Using the locals parameter makes it so that the code of a Python script runs as
if it were in the body of a ``class``. One effect of this is that functions
defined as part of a script cannot call one another directly.
Fixes: #24704, #13653
This brings back support for Z-Wave thermostats
of SETPOINT_THERMOSTAT specific device class.
Such devices don't have COMMAND_CLASS_THERMOSTAT_MODE
and are now handled separately.
* Bump adb-shell to 0.1.0 and androidtv to 0.0.36
* Add test for setting up two devices
* Add test_setup_same_device_twice
* Fix test_setup_two_devices
* Fix coverage
* Coverage
* Fix flaky 'test_setup_two_devices'
* Another stab at coverage
* Rename 'address' back to 'host'
* Fix https://github.com/home-assistant/home-assistant/issues/29853
* Run script.gen_requirements
* Update to store Token File in config directory
* Update to store Token File in config directory
* Update to store Token File in config directory
* Implement Alexa.EventDetectionSensor Interface
* Removed references to PR #28218 not yet merged into dev.
* Update tests to include Alexa Interface
* Guard for `unknown` and `unavailible` states.
* Fixed Unnecessary "elif" after "return"
* Adding filters for keypad dimmers and smoke sensor
* ran black --fast as suggested
* Adding filters for keypad dimmers and smoke sensor
* ran black --fast as suggested
* Update configuration schema to support multiple Pi-holes
* Construct sensors for each configured Pi-hole
* Ensure each Pi-hole has a unique name
* Update services to handle multiple Pi-holes
* Update tests for multiple configurations
* Refactor tests to support service testing
* Fix else-raise per pyliunt
* Per code review, add all entities in a single call
* Per code review, add the default name as default.
* Per code review, add cv.ensure_list to prevent breaking change
* Per code review, move name validation to schema
* Remove default name
* Per code review, validate api_key in schema definition
* Per code review, rename variables
* Per code review, use list comprehension
* Ensure unique slug names in config validation
* Per code review, refactor to CoroutineMock
* Fix adding sensor entities
* Per code review, refactor mock function creation
* Per code review, refactor mock function return values
* Added dummy user-agent to http request to fix setup error
* Replace dummy user-agent with the user-agent of the global home assistant session
* Adjust comment and rename user-agent constant
* Added dummy user-agent to http request to fix setup error
* Replace dummy user-agent with the user-agent of the global home assistant session
* Adjust comment and rename user-agent constant
* Added a check for Connect actually returning something before telling the user the setup succeeded
* Added handling for KeyError in case API returns empty response, formatting
* Trying to please the linter
* Fixing issue where wrong sleep state entry was being used. closes #28370,#29397
* Fixing formatting.
* Sorting imports to get black checks to pass.
* Using lambda for getting latest sleep serie.
* Re-authorize Huawei LTE on login required error
Closes https://github.com/home-assistant/home-assistant/issues/29531
* Eliminate one indented "else" block
* Convert get_data from inline to instance method
* Use .get instead of [] for checking subscriptions for clarity
* Include MAC address in device state attributes for absent devices too
* Use MAC address as default name whether device is connected or not
* Fix initialization of known entities
Closes https://github.com/home-assistant/home-assistant/issues/29354
* Limit available heat/cool modes for HomeKit thermostats.
The Home app only shows appropriate modes (heat/cool/auto) for the device. Depending on the climate integration, disabling the auto start might be needed.
* Include improved mapping for HVAC modes in tests
* add skeleton to retrieve zigbee groups
* get single group
* add a group
* return group members with group
* add comment
* fix group members
* add function to add device to group
* add group members
* add remove from group method
* add api to remove members from group
* add remove groups method
* clean up group add and remove
* fix remove group
* fix remove groups
* add api to get only groupable devices
* change var init
* add tests
* address review comment
* use isort to sort imports for components starting with 'z'
* add skip to end of zha/core/channels/__init__.py
* put 'pylint: disable=import-error' at the right place
* remove the import of config_flow in zha/__init__.py
According to @balloob it is no longer needed.
* revert previous commit
* isort:skip homeassistant/components/zha/__init__.py completely
* iCloud: setup ConfigFlow and prepare for more platforms
- add config flow + tests
- fix existing services
- add play_sound & display_message services
- document services
- can use devices with the same name
- prepare to add sensor platform
* Review : not copy account conf
* Review: Safer test patch
* Review: remove reset_account
* Review: Use executor_job while IO
* Review: Use executor_job while IO 2
* Review: use hass.helpers.storage.Store()
* Review: no IO in tests
* Remove reset from services.yaml
* Review: remove authenticate.return_value = Mock()
* Review: do not initialize the api with the mocked service
* isort
* Review: @MartinHjelmare Test config flow with all steps
* Review: Fix failed tests names
* Codevov: Add one missing test
* Move imports to top for homekit
* Moved back a couple imports, added annotation to disable import-outside-toplevel
* Fix all tests in test_homekit.py
* Wrap connection attempt by try/except block so an individual downed doorbird does not fail the whole platform
* Fixed lint warning
* Disable too-broad-exception pylint warning since the whole point of this is to catch all exceptions and log them while letting processing continue; I don't disable a lint warning lightly, but this is the entire intent of this PR.
* Fixed name of pylint warning to broad-except
* Use _LOGGER.exception to get the stack trace too, per PEP8 recommendation for a bare Exception being caught.
* per @balloob, switch to just catching OSError on a narrow block; I'm not sure this protects all problems with Doorbird device startup, but it protects against the primary one I experience.
* added signalmessenger integration
* allows to send a message (with an attachment) to one or more
recipients
* added signalmessenger documentation to manifest file
* remove debug logging from signalmessenger integration
* add signalmessenger to .coveragerc
* fixed typo in signalmessenger manifes
* moved service specific code to own pypi library
* updated pysignalclirestapi dependeny in manifest.json
* added pysignalclirestapi requirement for signalmessenger component
* fixed typo in codeowners
* reworked signalmessenger integration based on code review input
* updated requirements for signalmessenger
* small code improvements in signalmessenger integration
* no need to use the get() method to access dict parameters that are
required
* small changes in signalmessenger integration
* re-ordered import statements
* removed empty "requirements" list (not needed)
* changed import order in signalmessenger integration according to PEP 8
* used isort to order includes in signalmessenger integration
* renamed signalmessenger to signal_messenger
* renamed signalmessenger to signal_messenger in CODEOWNERS file
* changed documentation url in signal_messenger integration to new name
* changed signal messenger naming in .coveragerc
* Adding tests for vera component.
Fixing update bug in the vera climate platform.
* Updating requrements file.
* Moving vera stop to a job.
Sorting imports.
* Addressing simple PR feedback.
* Splitting tests into platforms.
* Mocking controller instead of using requests_mock.
* Updating pyvera to use version that stops threads quickly.
* Updating requirements files.
* Mocking the pyvera module, not the API.
* Addressing PR feedback.
Handling start/stop of patch in fixture.
Removing unecessary code.
* Using generator
The obj["state"] contains already several named return states as
following: "grass cutting", "trapped recovery", "searching wire",
"following wire", "searching home", "home", "idle"
And with the batteryChargerState also the "charging"
Fixes#455
* Don't escape command parameters
Escaping should only be done when using the tcp socket cli interface which we aren't.
* Updated comment to reflect the changes
* Add clear traffic statistics service
* Add reboot service
* Register services as admin ones
* Make URL optional when there's only one router configured
* Eliminate one if/else indent level
* Remove unnecessary .keys() with sorted()
* Add quarterly tariff period to utility_meter
Many tariff cycles in Australia are 3 monthly (quarterly).
Add quarterly tariff cycle handling to the utility_meter component.
* Add quarterly tariff period to utility_meter
Many tariff cycles in Australia are 3 monthly (quarterly).
Add quarterly tariff cycle handling to the utility_meter component.
* Change date for test for utility_meter
* Add quarterly tariff period to utility_meter
Many tariff cycles in Australia are 3 monthly (quarterly).
Add quarterly tariff cycle handling to the utility_meter component.
* Move imports to top for google_assistant
* Fix pylint error caused by isorting the imports with noqa: F401
* Move back an import because of circular dependency, add annotations
* Add Elgato Key Light integration
* Remove passing in of hass loop
* Tweaks a comment
* Tweaks a function name
* Ensure domain namespace in data exists in entry setup
* Move imports to top for zha
* Move back some imports, add annotation for disabling import-outside-toplevel
* Move import config_flow before import api
* Include MAC address in device state attributes for absent devices too
* Use MAC address as default name whether device is connected or not
* Fix initialization of known entities
Closes https://github.com/home-assistant/home-assistant/issues/29354
* Move imports to top for soundtouch
* Format with black
* Fix pyling error by renaming variable
* Rename entity instances to include entity instead of device
* Limit available heat/cool modes for HomeKit thermostats.
The Home app only shows appropriate modes (heat/cool/auto) for the device. Depending on the climate integration, disabling the auto start might be needed.
* Include improved mapping for HVAC modes in tests
* Add input_boolean reload service.
* Add reload test.
* Address comments.
Register reload service as an admin service
Setup platform even if there're no entities
* Move imports to top for mochad
* Fix test test_light.py for mochad
* Fix test test_switch.py for mochad
* Make intra package imports relative in switch and light
* Move imports to top for statistics
* Added recorder to manifest.json
* Deleted recorder from manifest.json, moved import back into method, added pylint disable comment
* Moved recorder util imports away from the top
* Move recorder imports to top, add recorder as after_dependency to manifest.json
* Move imports to top for islamic_prayer_times
* Fix test_sensor.py for islamic_prayer_times
* Format test_sensor.py with black
* Fix tests for islamic prayer times sensor
* Report unavailable entites to google.
Entities should only removed when removed from HA. Removing a temporarily unavailable entity from google causes it to need to re-configured once it become available again.
* Fix test for unavailable entities
* Make async_report_state take agent_user_id
* Attempt to store synced agents
* Drop now not needed initialization
* Make sure cloud uses the all sync on changed preferences
* Some more places to use all version of sync
* Get the agent_user_id from the request context if available
* Minor cleanup
* Remove the old fixed agent_user_id for cloud
Instead pass along cloud_user where appropriate.
* async_delay_save takes a function
* Adjust test for delayed store
* Remove unused save function
* Add login check.
* Updated heatmiserV3 initial commit
* Fixing heatmiser component
* Updated codeowners and heatmiserV3 version
* Updating files as part of PR process
* Removed extra _LOGGER statements.
* Added in HVAC_MODE_OFF to allowed states to track whether heating on/off
* Handling PR comments
* Removed legacy tests
* fixing pylint errors
* Update homeassistant/components/heatmiser/climate.py
Removed .get from config
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/heatmiser/climate.py
Removed .get from config
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Update homeassistant/components/heatmiser/climate.py
Removed .get from config
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Updated climate based on latest feedback
* Removed cast to int and update requirements
* Update requirements
* Updated heatmiser deps
delete incorrect 'mdi:brightness-3' in final
```
def icon(self):
"""Icon to use in the frontend, if any."""
return MOON_ICONS.get(self.state, "mdi:brightness-3")
```
which still shows in the sensors attributes
* Added check for "name" channelMetada attribute
* Added/changed smart home media player tests for added value name in chanelMetadata payload section
* Since Alexa only expects a number/callSign/affiliate in the returned response, returning "name" is not technically valid. Modified to return the value in the callSign field instead since it's a text value. Since there is no returned channel number, cannot return a true numeric value in "channel" field
* Improve Alexa interface selection for binary sensors
This allows the sensor to work correctly as a contact or motion sensor
in alexa, if the user overrides its display category as such.
* add tests
* Add broadlink remote control platform
* Fix order of the imports
* Add remote.py to .coveragerc
* Optimize MAC address validation
* Use storage helper class and improve code readability
* Add me to the manifest as a code owner
* Fix dosctring
* Add me to the code owners
* Remove storage schemas, rename storage keys and improve readability
* move service constants to const.py, move all custom xiaomi_miio services to xiaomi_miio domain
* update service names
* try to fix black error
* try black formatting again
* final black formatting attempt
* update service names to reflect platform
* fix typo
* Clear state on exception
Clear state if querying the device fails. The state is then set to unknown, so it can be tracked if a miflora device isn't responding any more.
* Add available()
Signal valid data via available()
* Add ATEN PE component for ATEN eco PDUs
* aten_pe: Require host configuration
* aten_pe: Do not import from other integrations
* aten_pe: Include unnamed outlets
* aten_pe: Avoid get() for config entries having default values
* aten_pe: Fix documentation URI
* aten_pe: Remove unused return value
* aten_pe: Update atenpdu lib to 0.2.0 for asyncio
* aten_pe: Raise exception if initialization fails
* aten_pe: Update atenpdu lib to 0.3.0 for improved exception handling
* Add Huawei LTE binary sensor support, mobile connection sensor
* Improve mobile connection sensor icon docstring
* Remove device class for permission to use a more descriptive icon
* Added device trigger to alarm control panel
* Added supported features to check that device has certain trigger
* Fixed tests for device_trigger
* Fixed pylint error
* Removed pending trigger and removed trigger condition
* Resolve hosts for fritzbox_callmonitor
If the configuration supplied "host" is not an IP address, try resolving it
* always use gethostbyname
Instead of just checking whether it is an IP and if it isn't try to resolve; just resolve it; IPs will be returned unchanged, and hostnames will be resolved.
* Catch error if the hostname cannot be resolved
* Don't fallback to default host
If the hostname cannot be resolved; don't try to fallback; just print the error message.
* Fail setup if hostname cannot be resolved
If the hostname cannot be resolved, log an error and stop the setup;
no entities will be then created.
* Added DSMR Reader platform
- Added DSMR Reader platform
- Updated codeowners for other components I added earlier
* Move sensor definitions to new file
* Sensor definitions in new file
* Add energy prices from MQTT
* lint fixes
* Black formatted some files
* Update .coveragerc
* Support transform methods on definitions
* Manifest mangled by Black, fixed
* Visual studio code reformatting dictionary error
* Fix issues with code, remove unrelated manifest changes
* Update CODEOWNERS
* Only create cloud user if cloud in use
* Pass context to alexa
* Update requirements
* Fix handing & design pattern for 0.30
* fix tests
* Fix lint & tests
* rename internal user
* update demo service domain and service description
* move DOMAIN and service name to const.py
* update per balloob's service name suggestion
* update service name in services.yaml
* update service name constant's name
* Adding lutron_caseta fan controller. Updated to pylutron 0.5.1
* Accidental import remain
* updating for black formatting
* Fix blank spaces
* Moving third party import
* update to 0.5.1 to pass checks
* fix deletion of new line
* Update fan.py
* Update with dev branch, update from comments, added mediumhigh
Instead of using the roku.power method, which toggles power,
implement the media_player.turn_on command for the roku component
by calling the new roku.poweron method.
Fixes#28961, but depends on upstream
https://github.com/jcarbaugh/python-roku/pull/53
* Add opentherm_gw device support
* Add support for enabling/disabling of opentherm_gw entities
* Disable sensors by default, base climate entity_id on gw_id instead of friendly_name to guarantee uniqueness
* Remove platform name from unique_id
Since 2019.1 has launched there is a perfectly reasonable (in fact the standard) case where ios component is loaded (i.e. actionable notifications) but no devices are registed for the now defunct `ios.notify` service. As such, the log warning relating to this case is no longer relevant.
* Upgrade upcloud-api to 0.4.5
* Fix UpCloud name spelling in manifest
* Update data at setup time for better initial states
* Clean up signal handlers on remove
* Signal data update on server start
To keep related binary sensor better up to date.
* Improve track_time_interval emulation for initial update
* Move request sync logic into GoogleConfig
* Return http status code for request_sync same as cloud
* agent_user_id is not optional for async_sync_entities now
* No need in checking parameter here
* Adjust some things for cloud tests
* Adjust some more stuff for cloud tests
* Drop uneccessary else
* Black required change
* Let async_schedule_google_sync take agent_user_id
* Assert return value on api call
* Test old api key method
* Update homeassistant/components/google_assistant/helpers.py
Co-Authored-By: Paulus Schoutsen <paulus@home-assistant.io>
* Make rest sensor a little bit more flexible and allow the response to be a list with 0th element being a dictionary
* Black formatter wanted a different formatting
* Added test case for a list response with dict as 0th element
* Fixed lint error - it thinks a + STRING is an avoidance of using % sequences for log messages; I generally prefer explicit + rather than string juxtaposition for combining string literals, but sounds like that's not the standard
* Fixed test case -- I added it to the wrong scenario and need to use the one with json_attrs.
Although I originally contributed this component, I no longer use it myself and haven't been following the internal development of HA, so I'm no longer a good person to review any further changes to this component. I would therefore like to relinquish my CODEOWNER status over this component.
* Added Post Processing Jobs to NZBGet component
In the current implementation of the NZBGet component there is no way of
knowing whether NZBGet is still in the Post Processing phase of a download
job. This can be very useful information. For instance when you want to
suspend the NZBGet service when all queue items have been completed.
This change adds that additional sensor.
* Renamed Count to Jobs in NZBGet component
* change fromkeys to dict comprehension to prevent append working on a list by reference. Now each entity id has its own seperate list
* change fromkeys to dict comprehension to prevent append working on a list by reference. Now each entity id has its own seperate list
* use get instead of direct keys for dict
* change fromkeys to dict comprehension to prevent append working on a list by reference. Now each entity id has its own seperate list
* use get instead of direct keys for dict
* changed get back to []
* move service constants to const.py, update blackbird custom service domain
* Readd bluesound services.yaml entries since it should be part of a different branch
* update service domain for local_file from camera to local_file
* remove service.yaml entry in camera component as part of change
* fix test
* move constants to const.py
* add local_file/const.py to .coveragerc
* remove local_file/const.py from .coveragerc since component has tests
* add model and serial to caseta devices
* use just serial for unique id
* add display name for entity registry
* remove caseta device model
* just store device
* state and device are the same
* Update WazeRouteCalculator to 0.11
* Update WazeRouteCalculator to 0.11
* Adding new config options to Waze
* Fixing avoid subscription option
* Update WazeRouteCalculator to 0.12
There was an error in the underlying lib
* Update WazeRouteCalculator to 0.12
* Fix digest auth rest sensors
* Refactor to use request()
* Fix black complaints
* Don't rename data variable
Don't rename the data variable, appears several other sensors have been coded to rely on it
* Fix tests
test_setup_missing_schema:
Change the exception to check for to PlatformNotReady. With the change away from prepared statements, we no longer get the MissingSchema error during setup - we get it when we attempt to call the endpoint. Since the result is PlatformNotReady, which is what we want, and the error log clearly contains a note that the schema is incorrect I think this is fine.
test_setup_failed_connect & test_setup_timeout:
These aren't checking for minimum config, and they're not invoking the correct method to have the default config filled in. Therefore I've just added the correct minimum config so these can continue to test what they're there to test.
test_update_request_exception:
Testing a request exception with the assert on line 404! Excellent. Anyway, we've moved from using the requests Session object to the requests.request function - so the patch needed to be altered to ensure the RequestException was raised.
* Remove no longer needed import
* Fix binary sensor test in same way
* Explicitly include Alexa Interface to discovery response.
* Updated cloud component test to reflect additional Alexa interface.
* Updated test for recently added SeekController.
* Make sure to cast the volume_level of a universal media_player to a float
* Fix test that expects the wrong bahaviour
* Catch exception instead of checking for None
* Fix Onvif setup error with a premature end of connection on GetStreamUri wsdl call
Reconnect to onvif camera after getting profiles to fix this error :
[homeassistant.components.onvif.camera] Retrieving stream uri
[zeep.asyncio.transport] HTTP Post to http://192.168.1.15/onvif/Media:
b'<?xml version=\'1.0\' encoding=\'utf-8\'?>\n<soap-env:Envelope xmlns:soap-env="http://www.w3.org/2003/05/soap-envelope"><soap-env:Header><wsse:Security xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecur
2019-09-20 01:08:51 ERROR (MainThread) [homeassistant.components.camera] Error while setting up platform onvif
Traceback (most recent call last):
File "/usr/local/lib/python3.7/site-packages/aiohttp/client_reqrep.py", line 553, in write_bytes
await self.body.write(writer)
File "/usr/local/lib/python3.7/site-packages/aiohttp/payload.py", line 231, in write
await writer.write(self._value)
File "/usr/local/lib/python3.7/site-packages/aiohttp/http_writer.py", line 101, in write
self._write(chunk)
File "/usr/local/lib/python3.7/site-packages/aiohttp/http_writer.py", line 67, in _write
raise ConnectionResetError('Cannot write to closing transport')
ConnectionResetError: Cannot write to closing transport
The above exception was the direct cause of the following exception:
Traceback (most recent call last):
File "/usr/src/homeassistant/homeassistant/helpers/entity_platform.py", line 150, in _async_setup_platform
await asyncio.wait_for(asyncio.shield(task), SLOW_SETUP_MAX_WAIT)
File "/usr/local/lib/python3.7/asyncio/tasks.py", line 442, in wait_for
return fut.result()
File "/usr/src/homeassistant/homeassistant/components/onvif/camera.py", line 110, in async_setup_platform
await hass_camera.async_initialize()
File "/usr/src/homeassistant/homeassistant/components/onvif/camera.py", line 168, in async_initialize
await self.async_obtain_input_uri()
File "/usr/src/homeassistant/homeassistant/components/onvif/camera.py", line 266, in async_obtain_input_uri
stream_uri = await media_service.GetStreamUri(req)
File "/usr/local/lib/python3.7/site-packages/zeep/asyncio/bindings.py", line 13, in send
options["address"], envelope, http_headers
File "/usr/local/lib/python3.7/site-packages/zeep/asyncio/transport.py", line 107, in post_xml
response = await self.post(address, message, headers)
File "/usr/local/lib/python3.7/site-packages/zeep/asyncio/transport.py", line 95, in post
proxy=self.proxy,
File "/usr/local/lib/python3.7/site-packages/aiohttp/client.py", line 497, in _request
await resp.start(conn)
File "/usr/local/lib/python3.7/site-packages/aiohttp/client_reqrep.py", line 844, in start
message, payload = await self._protocol.read() # type: ignore # noqa
File "/usr/local/lib/python3.7/site-packages/aiohttp/streams.py", line 588, in read
await self._waiter
aiohttp.client_exceptions.ClientOSError: [Errno None] Can not write request body for http://192.168.1.15/onvif/Media
* Add code comment
* Update camera.py
* Lint.
* Improve z-wave thermostat support
Discover thermostat using COMMAND_CLASS_THERMOSTAT_MODE
so that it is a single entitiy in case there are multiple
setpoints. z-wave docs mention it is always present.
Add support for single/range target temperature depending
on the current thermostat mode.
* Remove debug print
* Refactor Z-Wave dynamic setpoint(s) selection
- use explicit mapping between modes and setpoints as defined in
Z-Wave specs
- add tests for away (2 setpoints) and heat eco (1 setpoint) modes
* Add non-standard thermostat mode aliases
* Added availability_template to Template Cover platform
* Added availability_template to Template Binary Sensor platform
* Added availability_template to Template Fan platform
* Added availability_template to Template Light platform
* Added availability_template to Template Sensor platform
* Added availability_template to Template Switch platform
* Added availability_template to Template Vacuum platform
* Added availability_template to Template Lock platform
* Added to test for invalid values in availability_template
* Black and Lint fix
* black formatting
* Added to test for invalid values in availability_template
* black
* Added to test for invalid values in availability_template
* Added to test for invalid values in availability_template
* simplified exception handler
* Fixed Entity discovery big and coverage
* Added to test for invalid values in availability_template
* flake8
* fixed component ID in test
* Added to test for invalid values in availability_template
* Added to test for invalid values in availability_template
* Made availability_template redering erorr more concise
* Cleaned template setup
* I'll remember to run black every time one of these days...
* Refactored Template initialisation
* Refactored Template initialisation
* Updated AVAILABILITY_TEMPLATE Rendering error
* Updated AVAILABILITY_TEMPLATE Rendering error
* Updated AVAILABILITY_TEMPLATE Rendering error
* Updated AVAILABILITY_TEMPLATE Rendering error
* Updated AVAILABILITY_TEMPLATE Rendering error
* Updated AVAILABILITY_TEMPLATE Rendering error
* Updated AVAILABILITY_TEMPLATE Rendering error
* Updated AVAILABILITY_TEMPLATE Rendering error
* Moved const to package Const.py
* Moved const to package Const.py
* Moved const to package Const.py
* Moved const to package Const.py
* Moved const to package Const.py
* Moved const to package Const.py
* Moved const to package Const.py
* Moved const to package Const.py
* Fix import order (pylint)
* Fix import order (pylint)
* Fix import order (pylint)
* Fix import order (pylint)
* Fix import order (pylint)
* Fix import order (pylint)
* Fix import order (pylint)
* Fixed linting issues
* Moved availability_template rendering to common loop
* Moved availability_template rendering to common loop
* Moved availability_template rendering to common loop
* Moved availability_template rendering to common loop
* Removed 'Magic' string
* Removed 'Magic' string and removed duplicate code
* Removed 'Magic' string
* Removed 'Magic' string
* Brought contant into line
* Refactored availability_tempalte rendering to common loop
* Removed 'Magic' string
* Cleaned up const and compare lowercase result to 'true'
* Cleaned up const and compare lowercase result to 'true'
* Cleaned up const and compare lowercase result to 'true'
* Cleaned up const and compare lowercase result to 'true'
* Cleaned up const and compare lowercase result to 'true'
* Cleaned up const and compare lowercase result to 'true'
* Cleaned up const and compare lowercase result to 'true'
* reverted _available back to boolean
* reverted _available back to boolean
* reverted _available back to boolean
* reverted _available back to boolean
* reverted _available back to boolean
* reverted _available back to boolean
* reverted _available back to boolean
* Fixed tests (magic values and state checks)
* Fixed tests (magic values and state checks)
* Fixed tests (async, magic values and state checks)
* Fixed tests (async, magic values and state checks)
* Fixed tests (async, magic values and state checks)
* Fixed tests (async, magic values and state checks)
* Fixed tests (async, magic values and state checks)
* Removed duplicate
* Clean up and remove debug
* Reverted Dev Container Change
* Add supported_features to Alarm Control Panel
* mark supported_features abstract
* Add SF to async_register_entity_service
* fix test
* Add missing SF SUPPORT_ALARM_ARM_CUSTOM_BYPASS
* isort
* fix async_register_entity_service
* Update alarm_control_panel.py
* Added Alexa.ModeController to cover entities.
* Added synonyms for directives.
* Updated tests for additional synonyms for directives.
* Added Alexa.ModeController to cover entities.
* Sacrifice unused variable in split() to please the Pylint gods.
* Removed duplicate instance check.
* Corrected variable name, clarified definition and consistency.
* Changed list to tuple.
If an entity is in unavailable state in HA, we expose this
as unreachable to Hue clients. This helps when troubleshooting
Hue issues because you can now receive feedback if there is an issue
on the HA side.
* Connect websocket when platforms ready, not when HA is ready
* Use callbacks from platform setup tasks instead
* Convert setup to async
* Apply suggestions from code review
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* Connect websocket when platforms ready, not when HA is ready
* Use callbacks from platform setup tasks instead
* Convert setup to async
* Apply suggestions from code review
Co-Authored-By: Martin Hjelmare <marhje52@gmail.com>
* rename request to response, isort and black fixes
* Log exception details
* Add status code to success log, reformat log
* new syntax for response
* changed info to debug
* Add Flume Sensor
Add support for Flume API and sensor
* Add support for choosing timezone
Timezone is now a required option in configuration.yaml
* Add Flume to coveragerc and CODEOWNERS
Add flume to be ommited from testing. Add @ChrisMandich as Flume Code owner
* Revert "Add Flume to coveragerc and CODEOWNERS"
This reverts commit 0b27437a3b.
* Update manifest.json
Added Documentation URL for Flume to HASS.IO
* Update manifest.json
Added missing Newline at EOF.
* Update sensor.py
Update sensor to not required Device ID for configuration. Now loops through all available Type 2 devices and adds them as an entity.
* Update Manifest, CODEOWNERS, and manifest.json
Resolved errors related to code owners and requirements. Using hassfest and gen_requirements_all
* Update sensor.py
Implemented recommendations from @Quentame. Including time zone from Home Assistant, Updated variable names, and Consolidated duplicate functions.
* Implemented suggested changes from @Quentame
This includes: components name, using f-strings instead of concat, snake_case for variables, constants for the addition of future device types, clearer errors, and removed variables no longer in use.
* Update sensor.py
Restored unit_of_measurement. Updated return to "gal".
* Address pylint errors
* Update sensor.py
Include protected attributes in setup_platform.
* Address Pylint errors
homeassistant/components/flume/sensor.py:63:11: W0703: Catching too general exception Exception (broad-except)
homeassistant/components/flume/sensor.py:133:8: R1720: Unnecessary "else" after "raise" (no-else-raise)
homeassistant/components/flume/sensor.py:162:8: R1705: Unnecessary "else" after "return" (no-else-return)
homeassistant/components/flume/sensor.py:236:8: R1720: Unnecessary "else" after "raise" (no-else-raise)
* Update sensor.py
I'm okay with the broad exception clause.
homeassistant/components/flume/sensor.py:65:11: W0703: Catching too general exception Exception (broad-except)
* Update sensor.py
Add more specific exceptions for Try/Except.
* Update Flume Sensory.py
add requirements, exclude from tests, us pyflume pypi package.
* Update sensor.py to support latest pyflume package
* Update manifest
provide better flow of manifest and easier readibility.
* Update manifest.json
Reccomended by @balloob as it is already a core requirement
* Update sensor.py
Add proposed changes from @balloob
* Update requirements_all.txt
pytz is a core dependency, removing flume's requirement for it.
* Update sensor.py
Added @MartinHjelmare recommended changes.
* Update sensor.py
Resolving PyLint error
* Update sensor.py
Remove `KeyError`. Add length check for flume entity list before adding.
* Update sensor.py
* Update pyflume version
* Update imports with isort
* Add line break between standard library and thirdparty imports.
* Remove throttle from sensor.py
* Added the Proxmox VE integration
* Fixed code as described in PR #27315
* Fixed small linting error
* Fix code as described in PR #27315 code review
* Improve code as described in PR #27315
It is incorrect to return None as a result of proprety call because in such a case state_attr call will return None as well, which means "Unknown attribute".
Instead for preset_mode(s) PRESET_NONE constant should be used for consistency.
* have sensor.moon use state dependent icons
Material design icons have icons for all sensor.states, let's use these natively in the component.
Based on the Season icons, tried to change accordingly.
* Update sensor.py
added state constants
* Update sensor.py
fixed missing mdi:
* order of constants. moon icons and use self.state
change order of constants to alphabetical, changed order in Moon_icons to alphabetical, used self.state for icon lookup
* replace the strings
replace the strings for self.state with the constants
* removed quotes
* removed spaces, empty line
* local Black
* Sort imports and move import to file header
Co-authored-by: Fabian Affolter <mail@fabian-affolter.ch>
* Add component VersaSense
* Updates based on review
* Changes based on review
* Fixed whitespace
* Fixed lines too long
* Fixed lines too long
* Formatted using black
* Added available property
* Set unavailable property appropriately
* Conversion to f-strings
* Load platform only once per platform
* Fixed duplicate identifiers across multiple devices
* Single call to async_add_entities during setup
* Removed unnecessary async/await syntax
* Added constants for key-value pairs
* Removed async/await syntax
* Added breaks in measurement check
* Added guard clause for discovery_info
* first version of new integration
* moved icon to shared consts
* added unit tests
* transformed from geolocation to sensor integration
* alert level is now the state of the sensor
* adopted unit tests
* fixed comment
* keep all sensors registered even if the feed update fails intermittently
* bumped version of upstream library
* bumped version of integration library
* regenerated requirements
* bumped version of integration library
* bumped version of integration library
* fixed generated file
* removed commented out code
* regenerated config flow file
* update to latest integration library version
* simplified code
* removed debug log statement
* simplified code structure
* defined constant
* use core interfaces
* moved test and fixture
* sorted imports
* simplified patching
* moved fixture to central config file
* Fix Synology camera whitelist
If whitelist config is set, not camera is added to HA at all.
* Fix Synology Camera whitelist
Fix typo in config key.
* Update camera.py
Access config dict the voluptuous way
* Add bandit to pre-commit and CI, use to catch known vulnerable XML parsing
* Use defusedxml instead of direct xml.etree to parse XML
* Move config to tests/bandit.yaml
* Rework Comfoconnect sensor platform
* Sort ATTRS and fix icon
* Add unique_id to fan
* Use a different signal per sensor type
* Add more logging
* Swap to be sure.
* Remove -fan suffix from unique_id
* Remove malformed pylint disable markers
* Remove some unused imports
* Remove some unneeded lint exclusions
* Remove more unneeded lint exclusions
* Add specific codes to all noqa's
* Fixed multi extruder/beds/chambers index issue, #28130
* Switched from .format to f style name formatting
* Fixed incorrect indexing
* Removed VS files
* Removed not need temp_id subtraction
* Removed VS files
* Fixed access mode
* Fixed access mode
* Fixing access mode - again
* First commit
* First working release, but there's a lot to do
* Added support for preset_modes
* Refined logic
* Added translations for config_flow
* Updated translations
* modified: homeassistant/components/hisense_aehw4a1/climate.py
* modified: climate.py
* Updated library to latest version
* Small changes
* Null states when AC off
* Minor fixes
* Latest updates for TOX
* First commit
* First working release, but there's a lot to do
* new file: requirements_test_all.txt
* Added support for preset_modes
* Refined logic
* Added translations for config_flow
* Updated translations
* modified: homeassistant/components/hisense_aehw4a1/climate.py
* modified: climate.py
* Updated library to latest version
* Small changes
* Null states when AC off
* Minor fixes
* Latest updates for TOX
* new file: requirements_test_all.txt
* Fighting with tox
* vs Tox round 2
* Isort and updated requirements_test_all.txt
* Fighting with lint
* Implemented available state
* Changed exception type after Travis-ci pylint fails
* Support entry in configuration.yaml
* Removed commented code
* Switched to async
* Minor changes
* Updated library and fixed pylint errors
* Code optimization
* Implemented static ip addresses in configuration.yaml
* Reverted to existing constant
* Corrected pylint wrong-import-order
* Recovery from nuke event (messing all while rebase)
* Resolved Ci error
* Changes for PR
* Corrected temp scale for frontend
* Added test for config entry from configuration.yaml
* Updated dependency
* Check on manual config
* Imported custom exceptions and modified import config
* Optimized
* Change based on PR revision
* Added logging for failure event on manual config
* Tests added but to be corrected
* Edited tests
* Tests updated to ensure no I/O
* Working on tests
* Cheanges based on revision for PR
* Setting librey exception as direct side_effect in test
* Final changes for PR
* Redundand on command solved
* Improved AC logic
* bump home mitemp_bt to 0.0.3. It has an important bugfix for reading temperatures under 10 grade
* adjust the version number for mitemp_bt up to 0.0.3
* Start
* Lock init
* More stubbing
* Final pieces for PR
* Fixed incorrect property access
* Updaed .coveragerc
* Ensure we can handle unknown states
* Account for lock's offline property
* Account for device online
* Unload components concurrently
* Handle unknown states more gracefully
* Add config entry and device support to Demo
* Some more devices
* Fix tests using demo
* Review comments
* Update config_flow.py
* Revert
* Disable pylint
<!-- What is breaking and why we have to break it. Remove this section only if it was NOT a breaking change. -->
## Description:
<!--
You are amazing! Thanks for contributing to our project!
Please, DO NOT DELETE ANY TEXT from this template! (unless instructed).
-->
## Breaking change
<!--
If your PR contains a breaking change for existing users, it is important
to tell them what breaks, how to make it work again and why we did this.
This piece of text is published with the release notes, so it helps if you
write it towards our users, not us.
Note: Remove this section if this PR is NOT a breaking change.
-->
**Related issue (if applicable):** fixes #<home-assistant issue number goes here>
## Proposed change
<!--
Describe the big picture of your changes here to communicate to the
maintainers why we should accept this pull request. If it fixes a bug
or resolves a feature request, be sure to link to that issue in the
additional information section.
-->
**Pull request with documentation for [home-assistant.io](https://github.com/home-assistant/home-assistant.io) (if applicable):** home-assistant/home-assistant.io#<home-assistant.io PR number goes here>
## Example entry for `configuration.yaml` (if applicable):
## Type of change
<!--
What type of change does your PR introduce to Home Assistant?
NOTE: Please, check only 1! box!
If your PR requires multiple boxes to be checked, you'll most likely need to
split it into multiple PRs. This makes things easier and faster to code review.
-->
- [ ] Dependency upgrade
- [ ] Bugfix (non-breaking change which fixes an issue)
- [ ] New integration (thank you!)
- [ ] New feature (which adds functionality to an existing integration)
- [ ] Code quality improvements to existing code or addition of tests
## Example entry for `configuration.yaml`:
<!--
Supplying a configuration snippet, makes it easier for a maintainer to test
your PR. Furthermore, for new integrations, it gives an impression of how
the configuration would look like.
Note: Remove this section if this PR does not have an example entry.
-->
```yaml
# Example configuration.yaml
```
## Checklist:
- [ ] The code change is tested and works locally.
- [ ] Local tests pass with `tox`. **Your PR cannot be merged unless tests pass**
- [ ] There is no commented out code in this PR.
- [ ] I have followed the [development checklist][dev-checklist]
## Additional information
<!--
Details are important, and help maintainers processing your PR.
Please be sure to fill out additional details, if applicable.
-->
- This PR fixes or closes issue: fixes #
- This PR is related to issue:
- Link to documentation pull request:
## Checklist
<!--
Put an `x` in the boxes that apply. You can also fill these out after
creating the PR. If you're unsure about any of them, don't hesitate to ask.
We're here to help! This is simply a reminder of what we are going to look
for before merging your code.
-->
- [ ] The code change is tested and works locally.
- [ ] Local tests pass. **Your PR cannot be merged unless tests pass**
- [ ] There is no commented out code in this PR.
- [ ] I have followed the [development checklist][dev-checklist]
- [ ] The code has been formatted using Black (`black --fast homeassistant tests`)
- [ ] Tests have been added to verify that the new code works.
If user exposed functionality or configuration variables are added/changed:
- [ ] Documentation added/updated in [home-assistant.io](https://github.com/home-assistant/home-assistant.io)
- [ ] Documentation added/updated for [www.home-assistant.io][docs-repository]
If the code communicates with devices, web services, or third-party tools:
- [ ] [_The manifest file_][manifest-docs] has all fields filled out correctly. Update and include derived files by running `python3 -m script.hassfest`.
- [ ] New or updated dependencies have been added to `requirements_all.txt` by running `python3 -m script.gen_requirements_all`.
- [ ] Untested files have been added to `.coveragerc`.
If the code does not interact with devices:
- [ ] Tests have been added to verify that the new code works.
- [ ] The [manifest file][manifest-docs] has all fields filled out correctly.
Updated and included derived files by running: `python3 -m script.hassfest`.
- [ ] New or updated dependencies have been added to `requirements_all.txt`.
Updated by running `python3 -m script.gen_requirements_all`.
- [ ] Untested files have been added to `.coveragerc`.
The integration reached or maintains the following [Integration Quality Scale][quality-scale]:
<!--
The Integration Quality Scale scores an integration on the code quality
and user experience. Each level of the quality scale consists of a list
of requirements. We highly recommend getting your integration scored!
@@ -4,7 +4,7 @@ Everybody is invited and welcome to contribute to Home Assistant. There is a lot
The process is straight-forward.
- Read [How to get faster PR reviews](https://github.com/kubernetes/community/blob/master/contributors/guide/pull-requests.md#best-practices-for-faster-reviews) by Kubernetes (but skip step 0)
- Read [How to get faster PR reviews](https://github.com/kubernetes/community/blob/master/contributors/guide/pull-requests.md#best-practices-for-faster-reviews) by Kubernetes (but skip step 0 and 1)
- Fork the Home Assistant [git repository](https://github.com/home-assistant/home-assistant).
- Write the code for your device, notification service, sensor, or IoT thing.
- Ensure tests work.
@@ -12,3 +12,7 @@ The process is straight-forward.
Still interested? Then you should take a peek at the [developer documentation](https://developers.home-assistant.io/) to get more details.
## Feature suggestions
If you want to suggest a new feature for Home Assistant (e.g., new integrations), please open a thread in our [Community Forum: Feature Requests](https://community.home-assistant.io/c/feature-requests).
We use [GitHub for tracking issues](https://github.com/home-assistant/home-assistant/issues), not for tracking feature requests.
Home Assistant is a home automation platform running on Python 3. It is able to track and control all devices at home and offer a platform for automating control.
To get started:
..code::bash
python3 -m pip install homeassistant
hass --open-ui
Open source home automation that puts local control and privacy first. Powered by a worldwide community of tinkerers and DIY enthusiasts. Perfect to run on a Raspberry Pi or a local server.
Check out `home-assistant.io <https://home-assistant.io>`__ for `a
"adguard_home_addon_outdated":"Denne integration kr\u00e6ver AdGuard Home {minimal_version} eller h\u00f8jere, du har {current_version}. Opdater venligst din Hass.io AdGuard Home-tilf\u00f8jelse.",
"adguard_home_outdated":"Denne integration kr\u00e6ver AdGuard Home {minimal_version} eller h\u00f8jere, du har {current_version}.",
"adguard_home_addon_outdated":"Diese Integration erfordert AdGuard Home {minimal_version} oder h\u00f6her, du hast {current_version}. Bitte aktualisiere dein Hass.io AdGuard Home Add-on.",
"adguard_home_outdated":"Diese Integration erfordert AdGuard Home {minimal_version} oder h\u00f6her, du hast {current_version}.",
"existing_instance_updated":"Bestehende Konfiguration wurde aktualisiert.",
"single_instance_allowed":"Es ist nur eine einzige Konfiguration von AdGuard Home zul\u00e4ssig."
"adguard_home_addon_outdated":"Questa integrazione richiede AdGuard Home {minimal_version} o versione successiva, si dispone di {current_version}. Aggiorna il componente aggiuntivo Hass.io AdGuard Home.",
"adguard_home_addon_outdated":"Questa integrazione richiede AdGuard Home {minimal_version} o versione successiva, si dispone di {current_version}. Aggiorna il componente aggiuntivo AdGuard Home di Hass.io.",
"adguard_home_outdated":"Questa integrazione richiede AdGuard Home {minimal_version} o versione successiva, si dispone di {current_version}.",
"wrong_location":"No Airly measuring stations in this area.",
"auth":"API key is not correct."
},
"abort":{
"already_configured":"Airly integration for these coordinates is already configured."
}
}
}
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
