Merge pull request #43356 from home-assistant/rc

* abort vizio discovery flow if unique ID cant be found because it means we cant connect

* add tests

* fix abort call

.coveragerc

@@ -119,7 +119,6 @@ omit =
     homeassistant/components/buienradar/weather.py
     homeassistant/components/caldav/calendar.py
     homeassistant/components/canary/camera.py
-    homeassistant/components/cast/*
     homeassistant/components/cert_expiry/helper.py
     homeassistant/components/channels/*
     homeassistant/components/circuit/*
@@ -305,6 +304,7 @@ omit =
     homeassistant/components/garmin_connect/__init__.py
     homeassistant/components/garmin_connect/const.py
     homeassistant/components/garmin_connect/sensor.py
+    homeassistant/components/garmin_connect/alarm_util.py
     homeassistant/components/gc100/*
     homeassistant/components/geniushub/*
     homeassistant/components/geizhals/sensor.py
@@ -377,7 +377,6 @@ omit =
     homeassistant/components/hvv_departures/__init__.py
     homeassistant/components/hydrawise/*
     homeassistant/components/hyperion/light.py
-    homeassistant/components/ialarm/alarm_control_panel.py
     homeassistant/components/iammeter/sensor.py
     homeassistant/components/iaqualink/binary_sensor.py
     homeassistant/components/iaqualink/climate.py
@@ -460,6 +459,7 @@ omit =
     homeassistant/components/lametric/*
     homeassistant/components/lannouncer/notify.py
     homeassistant/components/lastfm/sensor.py
+    homeassistant/components/launch_library/const.py
     homeassistant/components/launch_library/sensor.py
     homeassistant/components/lcn/*
     homeassistant/components/lg_netcast/media_player.py
@@ -632,7 +632,6 @@ omit =
     homeassistant/components/openuv/sensor.py
     homeassistant/components/openweathermap/sensor.py
     homeassistant/components/openweathermap/weather.py
-    homeassistant/components/openweathermap/forecast_update_coordinator.py
     homeassistant/components/openweathermap/weather_update_coordinator.py
     homeassistant/components/openweathermap/abstract_owm_sensor.py
     homeassistant/components/opnsense/*
@@ -730,6 +729,7 @@ omit =
     homeassistant/components/roomba/vacuum.py
     homeassistant/components/roon/__init__.py
     homeassistant/components/roon/const.py
+    homeassistant/components/roon/media_browser.py
     homeassistant/components/roon/media_player.py
     homeassistant/components/roon/server.py
     homeassistant/components/route53/*
@@ -770,6 +770,7 @@ omit =
     homeassistant/components/shelly/light.py
     homeassistant/components/shelly/sensor.py
     homeassistant/components/shelly/switch.py
+    homeassistant/components/shelly/utils.py
     homeassistant/components/sht31/sensor.py
     homeassistant/components/sigfox/sensor.py
     homeassistant/components/simplepush/notify.py

.github/lock.yml

@@ -1,27 +0,0 @@
-# Configuration for Lock Threads - https://github.com/dessant/lock-threads
-
-# Number of days of inactivity before a closed issue or pull request is locked
-daysUntilLock: 1
-
-# Skip issues and pull requests created before a given timestamp. Timestamp must
-# follow ISO 8601 (`YYYY-MM-DD`). Set to `false` to disable
-skipCreatedBefore: 2019-07-01
-
-# Issues and pull requests with these labels will be ignored. Set to `[]` to disable
-exemptLabels: []
-
-# Label to add before locking, such as `outdated`. Set to `false` to disable
-lockLabel: false
-
-# Comment to post before locking. Set to `false` to disable
-lockComment: false
-
-# Assign `resolved` as the reason for locking. Set to `false` to disable
-setLockReason: false
-
-# Limit to only `issues` or `pulls`
-only: pulls
-
-# Optionally, specify configuration settings just for `issues` or `pulls`
-issues:
-  daysUntilLock: 30

.github/stale.yml

@@ -1,66 +0,0 @@
-# Configuration for probot-stale - https://github.com/probot/stale
-
-# Number of days of inactivity before an Issue or Pull Request becomes stale
-daysUntilStale: 90
-
-# Number of days of inactivity before an Issue or Pull Request with the stale label is closed.
-# Set to false to disable. If disabled, issues still need to be closed manually, but will remain marked as stale.
-daysUntilClose: 7
-
-# Only issues or pull requests with all of these labels are check if stale. Defaults to `[]` (disabled)
-onlyLabels: []
-
-# Issues or Pull Requests with these labels will never be considered stale. Set to `[]` to disable
-exemptLabels:
-  - under investigation
-  - Help wanted
-
-# Set to true to ignore issues in a project (defaults to false)
-exemptProjects: true
-
-# Set to true to ignore issues in a milestone (defaults to false)
-exemptMilestones: true
-
-# Set to true to ignore issues with an assignee (defaults to false)
-exemptAssignees: false
-
-# Label to use when marking as stale
-staleLabel: stale
-
-# Comment to post when marking as stale. Set to `false` to disable
-markComment: >
-  There hasn't been any activity on this issue recently. Due to the high number
-  of incoming GitHub notifications, we have to clean some of the old issues,
-  as many of them have already been resolved with the latest updates.
-
-  Please make sure to update to the latest Home Assistant version and check
-  if that solves the issue. Let us know if that works for you by adding a
-  comment 👍
-
-  This issue now has been marked as stale and will be closed if no further
-  activity occurs. Thank you for your contributions.
-
-# Comment to post when removing the stale label.
-# unmarkComment: >
-#   Your comment here.
-
-# Comment to post when closing a stale Issue or Pull Request.
-# closeComment: >
-#   Your comment here.
-
-# Limit the number of actions per hour, from 1-30. Default is 30
-limitPerRun: 30
-
-# Limit to only `issues` or `pulls`
-# only: issues
-
-# Handle pull requests a little bit faster and with an adjusted comment.
-pulls:
-  daysUntilStale: 30
-  exemptProjects: false
-  markComment: >
-    There hasn't been any activity on this pull request recently. This pull
-    request has been automatically marked as stale because of that and will
-    be closed if no further activity occurs within 7 days.
-
-    Thank you for your contributions.

.github/workflows/ci.yaml

@@ -214,11 +214,11 @@ jobs:
         run: |
           echo "::add-matcher::.github/workflows/matchers/hadolint.json"
       - name: Check Dockerfile
-        uses: docker://hadolint/hadolint:v1.18.0
+        uses: docker://hadolint/hadolint:v1.18.2
         with:
           args: hadolint Dockerfile
       - name: Check Dockerfile.dev
-        uses: docker://hadolint/hadolint:v1.18.0
+        uses: docker://hadolint/hadolint:v1.18.2
         with:
           args: hadolint Dockerfile.dev
 
@@ -590,7 +590,8 @@ jobs:
     steps:
       - name: Check out code from GitHub
         uses: actions/checkout@v2
-      - name: Restore full Python ${{ matrix.python-version }} virtual environment
+      - name:
+          Restore full Python ${{ matrix.python-version }} virtual environment
         id: cache-venv
         uses: actions/cache@v2
         with:
@@ -604,7 +605,8 @@ jobs:
             ${{ env.CACHE_VERSION}}-${{ runner.os }}-venv-${{ matrix.python-version }}-${{ hashFiles('requirements_test.txt') }}-${{ hashFiles('requirements_all.txt') }}
             ${{ env.CACHE_VERSION}}-${{ runner.os }}-venv-${{ matrix.python-version }}-${{ hashFiles('requirements_test.txt') }}
             ${{ env.CACHE_VERSION}}-${{ runner.os }}-venv-${{ matrix.python-version }}-
-      - name: Create full Python ${{ matrix.python-version }} virtual environment
+      - name:
+          Create full Python ${{ matrix.python-version }} virtual environment
         if: steps.cache-venv.outputs.cache-hit != 'true'
         run: |
           python -m venv venv
@@ -625,7 +627,8 @@ jobs:
     steps:
       - name: Check out code from GitHub
         uses: actions/checkout@v2
-      - name: Restore full Python ${{ matrix.python-version }} virtual environment
+      - name:
+          Restore full Python ${{ matrix.python-version }} virtual environment
         id: cache-venv
         uses: actions/cache@v2
         with:
@@ -659,7 +662,8 @@ jobs:
     steps:
       - name: Check out code from GitHub
         uses: actions/checkout@v2
-      - name: Restore full Python ${{ matrix.python-version }} virtual environment
+      - name:
+          Restore full Python ${{ matrix.python-version }} virtual environment
         id: cache-venv
         uses: actions/cache@v2
         with:
@@ -695,7 +699,8 @@ jobs:
     steps:
       - name: Check out code from GitHub
         uses: actions/checkout@v2
-      - name: Restore full Python ${{ matrix.python-version }} virtual environment
+      - name:
+          Restore full Python ${{ matrix.python-version }} virtual environment
         id: cache-venv
         uses: actions/cache@v2
         with:
@@ -755,7 +760,8 @@ jobs:
     steps:
       - name: Check out code from GitHub
         uses: actions/checkout@v2
-      - name: Restore full Python ${{ matrix.python-version }} virtual environment
+      - name:
+          Restore full Python ${{ matrix.python-version }} virtual environment
         id: cache-venv
         uses: actions/cache@v2
         with:

.github/workflows/lock.yml

@@ -0,0 +1,20 @@
+name: Lock
+
+# yamllint disable-line rule:truthy
+on:
+  schedule:
+    - cron: "0 * * * *"
+
+jobs:
+  lock:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: dessant/lock-threads@v2.0.1
+        with:
+          github-token: ${{ github.token }}
+          issue-lock-inactive-days: "30"
+          issue-exclude-created-before: "2020-10-01T00:00:00Z"
+          issue-lock-reason: ""
+          pr-lock-inactive-days: "1"
+          pr-exclude-created-before: "2020-11-01T00:00:00Z"
+          pr-lock-reason: ""

.github/workflows/stale.yml

@@ -0,0 +1,84 @@
+name: Stale
+
+# yamllint disable-line rule:truthy
+on:
+  schedule:
+    - cron: "0 * * * *"
+
+jobs:
+  stale:
+    runs-on: ubuntu-latest
+    steps:
+      # The 90 day stale policy
+      # Used for: Everything (unless 30 day policy below beats it)
+      - name: 90 days stale policy
+        uses: actions/stale@v3.0.13
+        with:
+          repo-token: ${{ secrets.GITHUB_TOKEN }}
+          days-before-stale: 90
+          days-before-close: 7
+          operations-per-run: 25
+          remove-stale-when-updated: true
+          stale-issue-label: "stale"
+          exempt-issue-labels: "no-stale,Help%20wanted,help-wanted"
+          stale-issue-message: >
+            There hasn't been any activity on this issue recently. Due to the
+            high number of incoming GitHub notifications, we have to clean some
+            of the old issues, as many of them have already been resolved with
+            the latest updates.
+
+            Please make sure to update to the latest Home Assistant version and
+            check if that solves the issue. Let us know if that works for you by
+            adding a comment 👍
+
+            This issue has now been marked as stale and will be closed if no
+            further activity occurs. Thank you for your contributions.
+
+          stale-pr-label: "stale"
+          exempt-pr-labels: "no-stale"
+          stale-pr-message: >
+            There hasn't been any activity on this pull request recently. This
+            pull request has been automatically marked as stale because of that
+            and will be closed if no further activity occurs within 7 days.
+
+            Thank you for your contributions.
+
+      # The 30 day stale policy
+      # Used for:
+      # - Issues that are pending more information (incomplete issues)
+      # - PRs that are not marked as new-integration
+      - name: 30 days stale policy
+        uses: actions/stale@v3.0.13
+        with:
+          repo-token: ${{ secrets.GITHUB_TOKEN }}
+          # PRs have a CLA signed label, we can misuse it to apply this policy
+          only-labels: "cla-signed,needs-more-information"
+          days-before-stale: 30
+          days-before-close: 7
+          operations-per-run: 5
+          remove-stale-when-updated: true
+          stale-issue-label: "stale"
+          exempt-issue-labels: "no-stale,Help%20wanted,help-wanted"
+          stale-issue-message: >
+            There hasn't been any activity on this issue recently. Due to the
+            high number of incoming GitHub notifications, we have to clean some
+            of the old issues, as many of them have already been resolved with
+            the latest updates.
+
+            Please make sure to update to the latest Home Assistant version and
+            check if that solves the issue. Let us know if that works for you by
+            adding a comment 👍
+
+            This issue has now been marked as stale and will be closed if no
+            further activity occurs. Thank you for your contributions.
+
+          stale-pr-label: "stale"
+          # Exempt new integrations, these often take more time.
+          # They will automatically be handled by the 90 day version above.
+          exempt-pr-labels: "no-stale,new-integration"
+          stale-pr-message: >
+            There hasn't been any activity on this pull request recently. This
+            pull request has been automatically marked as stale because of that
+            and will be closed if no further activity occurs within 7 days.
+
+            Thank you for your contributions.

.travis.yml

@@ -1,4 +1,4 @@
-dist: bionic
+dist: focal
 addons:
   apt:
     packages:
@@ -11,9 +11,6 @@ addons:
       - libswscale-dev
       - libswresample-dev
       - libavfilter-dev
-    sources:
-      - sourceline: ppa:savoury1/ffmpeg4
-      - sourceline: ppa:savoury1/multimedia
 
 python:
   - "3.7.1"
@@ -42,4 +39,4 @@ cache:
     - $HOME/.cache/pre-commit
 install: pip install -U tox tox-travis
 language: python
-script: ${TRAVIS_WAIT:+travis_wait $TRAVIS_WAIT} tox --develop ${TOX_ARGS-}
+script: ${TRAVIS_WAIT:+travis_wait $TRAVIS_WAIT} tox -vv --develop ${TOX_ARGS-}

CODEOWNERS

@@ -9,6 +9,12 @@ homeassistant/*.py @home-assistant/core
 homeassistant/helpers/* @home-assistant/core
 homeassistant/util/* @home-assistant/core
 
+# Home Assistant Supervisor
+build.json @home-assistant/supervisor
+machine/* @home-assistant/supervisor
+rootfs/* @home-assistant/supervisor
+Dockerfile @home-assistant/supervisor
+
 # Other code
 homeassistant/scripts/check_config.py @kellerza
 
@@ -58,6 +64,7 @@ homeassistant/components/bitcoin/* @fabaff
 homeassistant/components/bizkaibus/* @UgaitzEtxebarria
 homeassistant/components/blebox/* @gadgetmobile
 homeassistant/components/blink/* @fronzbot
+homeassistant/components/blueprint/* @home-assistant/core
 homeassistant/components/bmp280/* @belidzs
 homeassistant/components/bmw_connected_drive/* @gerard33 @rikroe
 homeassistant/components/bond/* @prystupa
@@ -76,6 +83,7 @@ homeassistant/components/cisco_mobility_express/* @fbradyirl
 homeassistant/components/cisco_webex_teams/* @fbradyirl
 homeassistant/components/cloud/* @home-assistant/cloud
 homeassistant/components/cloudflare/* @ludeeus @ctalkington
+homeassistant/components/color_extractor/* @GenericStudent
 homeassistant/components/comfoconnect/* @michaelarnauts
 homeassistant/components/config/* @home-assistant/core
 homeassistant/components/configurator/* @home-assistant/core
@@ -126,6 +134,7 @@ homeassistant/components/enocean/* @bdurrer
 homeassistant/components/entur_public_transport/* @hfurubotten
 homeassistant/components/environment_canada/* @michaeldavie
 homeassistant/components/ephember/* @ttroy50
+homeassistant/components/epson/* @pszafer
 homeassistant/components/epsonworkforce/* @ThaStealth
 homeassistant/components/eq3btsmart/* @rytilahti
 homeassistant/components/esphome/* @OttoWinter
@@ -169,7 +178,7 @@ homeassistant/components/group/* @home-assistant/core
 homeassistant/components/growatt_server/* @indykoning
 homeassistant/components/guardian/* @bachya
 homeassistant/components/harmony/* @ehendrix23 @bramkragten @bdraco
-homeassistant/components/hassio/* @home-assistant/hass-io
+homeassistant/components/hassio/* @home-assistant/supervisor
 homeassistant/components/hdmi_cec/* @newAM
 homeassistant/components/heatmiser/* @andylockran
 homeassistant/components/heos/* @andrewsayre
@@ -186,7 +195,6 @@ homeassistant/components/homekit/* @bdraco
 homeassistant/components/homekit_controller/* @Jc2k
 homeassistant/components/homematic/* @pvizeli @danielperna84
 homeassistant/components/homematicip_cloud/* @SukramJ
-homeassistant/components/honeywell/* @zxdavb
 homeassistant/components/http/* @home-assistant/core
 homeassistant/components/huawei_lte/* @scop @fphammerle
 homeassistant/components/huawei_router/* @abmantis
@@ -257,7 +265,7 @@ homeassistant/components/met/* @danielhiversen @thimic
 homeassistant/components/meteo_france/* @hacf-fr @oncleben31 @Quentame
 homeassistant/components/meteoalarm/* @rolfberkenbosch
 homeassistant/components/metoffice/* @MrHarcombe
-homeassistant/components/miflora/* @danielhiversen @ChristianKuehnel @basnijholt
+homeassistant/components/miflora/* @danielhiversen @basnijholt
 homeassistant/components/mikrotik/* @engrbm87
 homeassistant/components/mill/* @danielhiversen
 homeassistant/components/min_max/* @fabaff
@@ -311,7 +319,7 @@ homeassistant/components/openerz/* @misialq
 homeassistant/components/opengarage/* @danielhiversen
 homeassistant/components/opentherm_gw/* @mvn23
 homeassistant/components/openuv/* @bachya
-homeassistant/components/openweathermap/* @fabaff @freekode
+homeassistant/components/openweathermap/* @fabaff @freekode @nzapponi
 homeassistant/components/opnsense/* @mtreinish
 homeassistant/components/orangepi_gpio/* @pascallj
 homeassistant/components/oru/* @bvlaicu
@@ -326,7 +334,6 @@ homeassistant/components/pi4ioe5v9xxxx/* @antonverburg
 homeassistant/components/pi_hole/* @fabaff @johnluetke @shenxn
 homeassistant/components/pilight/* @trekky12
 homeassistant/components/plaato/* @JohNan
-homeassistant/components/plant/* @ChristianKuehnel
 homeassistant/components/plex/* @jjlawren
 homeassistant/components/plugwise/* @CoMPaTech @bouwew
 homeassistant/components/plum_lightpad/* @ColinHarrington @prystupa
@@ -362,6 +369,7 @@ homeassistant/components/rmvtransport/* @cgtobi
 homeassistant/components/roku/* @ctalkington
 homeassistant/components/roomba/* @pschmitt @cyr-ius @shenxn
 homeassistant/components/roon/* @pavoni
+homeassistant/components/rpi_gpio_pwm/* @soldag
 homeassistant/components/rpi_power/* @shenxn @swetoast
 homeassistant/components/ruckus_unleashed/* @gabe565
 homeassistant/components/safe_mode/* @home-assistant/core
@@ -381,7 +389,7 @@ homeassistant/components/seven_segments/* @fabaff
 homeassistant/components/seventeentrack/* @bachya
 homeassistant/components/sharkiq/* @ajmarks
 homeassistant/components/shell_command/* @home-assistant/core
-homeassistant/components/shelly/* @balloob @bieniu
+homeassistant/components/shelly/* @balloob @bieniu @thecode
 homeassistant/components/shiftr/* @fabaff
 homeassistant/components/shodan/* @fabaff
 homeassistant/components/sighthound/* @robmarkcole
@@ -430,7 +438,7 @@ homeassistant/components/switchbot/* @danielhiversen
 homeassistant/components/switcher_kis/* @tomerfi
 homeassistant/components/switchmate/* @danielhiversen
 homeassistant/components/syncthru/* @nielstron
-homeassistant/components/synology_dsm/* @hacf-fr @Quentame
+homeassistant/components/synology_dsm/* @hacf-fr @Quentame @mib1185
 homeassistant/components/synology_srm/* @aerialls
 homeassistant/components/syslog/* @fabaff
 homeassistant/components/tado/* @michaelarnauts @bdraco

azure-pipelines-release.yml

@@ -14,7 +14,7 @@ schedules:
     always: true
 variables:
   - name: versionBuilder
-    value: '7.2.0'
+    value: '2020.11.0'
   - group: docker
   - group: github
   - group: twine
@@ -82,19 +82,14 @@ stages:
       matrix:
         amd64:
           buildArch: 'amd64'
-          buildMachine: 'qemux86-64,intel-nuc'
         i386:
           buildArch: 'i386'
-          buildMachine: 'qemux86'
         armhf:
           buildArch: 'armhf'
-          buildMachine: 'qemuarm,raspberrypi'
         armv7:
           buildArch: 'armv7'
-          buildMachine: 'raspberrypi2,raspberrypi3,raspberrypi4,odroid-xu,tinker'
         aarch64:
           buildArch: 'aarch64'
-          buildMachine: 'qemuarm-64,raspberrypi3-64,raspberrypi4-64,odroid-c2,odroid-n2'
     steps:
     - template: templates/azp-step-ha-version.yaml@azure
     - script: |
@@ -111,6 +106,57 @@ stages:
           -v $(pwd):/data:ro \
           homeassistant/amd64-builder:$(versionBuilder) \
           --generic $(homeassistantRelease) "--$(buildArch)" -t /data \
+      displayName: 'Build Release'
+  - job: 'ReleaseMachine'
+    dependsOn:
+    - ReleaseDocker
+    timeoutInMinutes: 240
+    pool:
+      vmImage: 'ubuntu-latest'
+    strategy:
+      maxParallel: 15
+      matrix:
+        qemux86-64:
+          buildMachine: 'qemux86-64'
+        intel-nuc:
+          buildMachine: 'intel-nuc'
+        qemux86:
+          buildMachine: 'qemux86'
+        qemuarm:
+          buildMachine: 'qemuarm'
+        raspberrypi:
+          buildMachine: 'raspberrypi'
+        raspberrypi2:
+          buildMachine: 'raspberrypi2'
+        raspberrypi3:
+          buildMachine: 'raspberrypi3'
+        raspberrypi4:
+          buildMachine: 'raspberrypi4'
+        odroid-xu:
+          buildMachine: 'odroid-xu'
+        tinker:
+          buildMachine: 'tinker'
+        qemuarm-64:
+          buildMachine: 'qemuarm-64'
+        raspberrypi3-64:
+          buildMachine: 'raspberrypi3-64'
+        raspberrypi4-64:
+          buildMachine: 'raspberrypi4-64'
+        odroid-c2:
+          buildMachine: 'odroid-c2'
+        odroid-c4:
+          buildMachine: 'odroid-c4'
+        odroid-n2:
+          buildMachine: 'odroid-n2'
+    steps:
+    - template: templates/azp-step-ha-version.yaml@azure
+    - script: |
+        docker login -u $(dockerUser) -p $(dockerPassword)
+      displayName: 'Docker hub login'
+    - script: docker pull homeassistant/amd64-builder:$(versionBuilder)
+      displayName: 'Install Builder'
+    - script: |
+        set -e
 
         docker run --rm --privileged \
           -v ~/.docker:/root/.docker \
@@ -119,7 +165,7 @@ stages:
           homeassistant/amd64-builder:$(versionBuilder) \
           --homeassistant-machine "$(homeassistantRelease)=$(buildMachine)" \
           -t /data/machine --docker-hub homeassistant
-      displayName: 'Build Release'
+      displayName: 'Build Machine'
 
 - stage: 'Publish'
   jobs:

build.json

@@ -1,11 +1,11 @@
 {
   "image": "homeassistant/{arch}-homeassistant",
   "build_from": {
-    "aarch64": "homeassistant/aarch64-homeassistant-base:2020.10.0",
-    "armhf": "homeassistant/armhf-homeassistant-base:2020.10.0",
-    "armv7": "homeassistant/armv7-homeassistant-base:2020.10.0",
-    "amd64": "homeassistant/amd64-homeassistant-base:2020.10.0",
-    "i386": "homeassistant/i386-homeassistant-base:2020.10.0"
+    "aarch64": "homeassistant/aarch64-homeassistant-base:2020.10.1",
+    "armhf": "homeassistant/armhf-homeassistant-base:2020.10.1",
+    "armv7": "homeassistant/armv7-homeassistant-base:2020.10.1",
+    "amd64": "homeassistant/amd64-homeassistant-base:2020.10.1",
+    "i386": "homeassistant/i386-homeassistant-base:2020.10.1"
   },
   "labels": {
     "io.hass.type": "core"

homeassistant/auth/providers/__init__.py

@@ -207,7 +207,7 @@ class LoginFlow(data_entry_flow.FlowHandler):
             errors["base"] = "invalid_auth_module"
 
         if len(self.available_mfa_modules) == 1:
-            self._auth_module_id = list(self.available_mfa_modules.keys())[0]
+            self._auth_module_id = list(self.available_mfa_modules)[0]
             return await self.async_step_mfa()
 
         return self.async_show_form(

homeassistant/bootstrap.py

@@ -28,6 +28,7 @@ from homeassistant.setup import (
     async_set_domains_to_be_loaded,
     async_setup_component,
 )
+from homeassistant.util.async_ import gather_with_concurrency
 from homeassistant.util.logging import async_activate_log_queue_handler
 from homeassistant.util.package import async_get_user_site, is_virtual_env
 from homeassistant.util.yaml import clear_secret_cache
@@ -49,6 +50,8 @@ STAGE_2_TIMEOUT = 300
 WRAP_UP_TIMEOUT = 300
 COOLDOWN_TIME = 60
 
+MAX_LOAD_CONCURRENTLY = 6
+
 DEBUGGER_INTEGRATIONS = {"debugpy", "ptvsd"}
 CORE_INTEGRATIONS = ("homeassistant", "persistent_notification")
 LOGGING_INTEGRATIONS = {
@@ -372,7 +375,7 @@ async def async_mount_local_lib_path(config_dir: str) -> str:
 def _get_domains(hass: core.HomeAssistant, config: Dict[str, Any]) -> Set[str]:
     """Get domains of components to set up."""
     # Filter out the repeating and common config section [homeassistant]
-    domains = {key.split(" ")[0] for key in config.keys() if key != core.DOMAIN}
+    domains = {key.split(" ")[0] for key in config if key != core.DOMAIN}
 
     # Add config entry domains
     if not hass.config.safe_mode:
@@ -442,7 +445,8 @@ async def _async_set_up_integrations(
 
         integrations_to_process = [
             int_or_exc
-            for int_or_exc in await asyncio.gather(
+            for int_or_exc in await gather_with_concurrency(
+                loader.MAX_LOAD_CONCURRENTLY,
                 *(
                     loader.async_get_integration(hass, domain)
                     for domain in old_to_resolve

homeassistant/components/abode/translations/bg.json

@@ -3,11 +3,6 @@
         "abort": {
             "single_instance_allowed": "\u0420\u0430\u0437\u0440\u0435\u0448\u0435\u043d\u0430 \u0435 \u0441\u0430\u043c\u043e \u0435\u0434\u043d\u0430 \u043a\u043e\u043d\u0444\u0438\u0433\u0443\u0440\u0430\u0446\u0438\u044f \u043d\u0430 Abode."
         },
-        "error": {
-            "connection_error": "\u041d\u0435\u0443\u0441\u043f\u0435\u0448\u043d\u043e \u0441\u0432\u044a\u0440\u0437\u0432\u0430\u043d\u0435 \u0441 Abode.",
-            "identifier_exists": "\u041f\u0440\u043e\u0444\u0438\u043b\u044a\u0442 \u0435 \u0432\u0435\u0447\u0435 \u0440\u0435\u0433\u0438\u0441\u0442\u0440\u0438\u0440\u0430\u043d.",
-            "invalid_credentials": "\u041d\u0435\u0432\u0430\u043b\u0438\u0434\u043d\u0438 \u0438\u0434\u0435\u043d\u0442\u0438\u0444\u0438\u043a\u0430\u0446\u0438\u043e\u043d\u043d\u0438 \u0434\u0430\u043d\u043d\u0438."
-        },
         "step": {
             "user": {
                 "data": {

homeassistant/components/abode/translations/ca.json

@@ -5,10 +5,7 @@
         },
         "error": {
             "cannot_connect": "Ha fallat la connexi\u00f3",
-            "connection_error": "No es pot connectar amb Abode.",
-            "identifier_exists": "Compte ja registrat.",
-            "invalid_auth": "Autenticaci\u00f3 inv\u00e0lida",
-            "invalid_credentials": "Credencials inv\u00e0lides."
+            "invalid_auth": "Autenticaci\u00f3 inv\u00e0lida"
         },
         "step": {
             "user": {

homeassistant/components/abode/translations/cs.json

@@ -5,10 +5,7 @@
         },
         "error": {
             "cannot_connect": "Nepoda\u0159ilo se p\u0159ipojit",
-            "connection_error": "Nelze se p\u0159ipojit k Abode.",
-            "identifier_exists": "\u00da\u010det je ji\u017e zaregistrov\u00e1n.",
-            "invalid_auth": "Neplatn\u00e9 ov\u011b\u0159en\u00ed",
-            "invalid_credentials": "Neplatn\u00e9 p\u0159ihla\u0161ovac\u00ed \u00fadaje."
+            "invalid_auth": "Neplatn\u00e9 ov\u011b\u0159en\u00ed"
         },
         "step": {
             "user": {

homeassistant/components/abode/translations/da.json

@@ -3,11 +3,6 @@
         "abort": {
             "single_instance_allowed": "Det er kun n\u00f8dvendigt med en ops\u00e6tning af Abode."
         },
-        "error": {
-            "connection_error": "Kunne ikke oprette forbindelse til Abode.",
-            "identifier_exists": "Konto er allerede registreret.",
-            "invalid_credentials": "Ugyldige legitimationsoplysninger."
-        },
         "step": {
             "user": {
                 "data": {

homeassistant/components/abode/translations/de.json

@@ -3,11 +3,6 @@
         "abort": {
             "single_instance_allowed": "Es ist nur eine einzige Konfiguration von Abode erlaubt."
         },
-        "error": {
-            "connection_error": "Es kann keine Verbindung zu Abode hergestellt werden.",
-            "identifier_exists": "Das Konto ist bereits registriert.",
-            "invalid_credentials": "Ung\u00fcltige Anmeldeinformationen"
-        },
         "step": {
             "user": {
                 "data": {

homeassistant/components/abode/translations/en.json

@@ -5,10 +5,7 @@
         },
         "error": {
             "cannot_connect": "Failed to connect",
-            "connection_error": "Unable to connect to Abode.",
-            "identifier_exists": "Account already registered.",
-            "invalid_auth": "Invalid authentication",
-            "invalid_credentials": "Invalid credentials."
+            "invalid_auth": "Invalid authentication"
         },
         "step": {
             "user": {

homeassistant/components/abode/translations/es-419.json

@@ -3,11 +3,6 @@
         "abort": {
             "single_instance_allowed": "Solo se permite una \u00fanica configuraci\u00f3n de Abode."
         },
-        "error": {
-            "connection_error": "No se puede conectar a Abode.",
-            "identifier_exists": "Cuenta ya registrada.",
-            "invalid_credentials": "Credenciales inv\u00e1lidas."
-        },
         "step": {
             "user": {
                 "data": {

homeassistant/components/abode/translations/es.json

@@ -5,10 +5,7 @@
         },
         "error": {
             "cannot_connect": "No se pudo conectar",
-            "connection_error": "No se puede conectar a Abode.",
-            "identifier_exists": "Cuenta ya registrada.",
-            "invalid_auth": "Autenticaci\u00f3n no v\u00e1lida",
-            "invalid_credentials": "Credenciales inv\u00e1lidas."
+            "invalid_auth": "Autenticaci\u00f3n no v\u00e1lida"
         },
         "step": {
             "user": {

homeassistant/components/abode/translations/et.json

@@ -5,10 +5,7 @@
         },
         "error": {
             "cannot_connect": "\u00dchendamine nurjus",
-            "connection_error": "\u00dchendus Abode-iga nurjus.",
-            "identifier_exists": "Konto on juba seadistatud",
-            "invalid_auth": "Tuvastamise viga",
-            "invalid_credentials": "Sobimatu mandaat."
+            "invalid_auth": "Tuvastamise viga"
         },
         "step": {
             "user": {

homeassistant/components/abode/translations/fi.json

@@ -1,7 +0,0 @@
-{
-    "config": {
-        "error": {
-            "connection_error": "Yhteytt\u00e4 Abodeen ei voi muodostaa."
-        }
-    }
-}

homeassistant/components/abode/translations/fr.json

@@ -5,10 +5,7 @@
         },
         "error": {
             "cannot_connect": "\u00c9chec de connexion",
-            "connection_error": "Impossible de se connecter \u00e0 Abode.",
-            "identifier_exists": "Compte d\u00e9j\u00e0 enregistr\u00e9.",
-            "invalid_auth": "Authentification invalide",
-            "invalid_credentials": "Informations d'identification invalides."
+            "invalid_auth": "Authentification invalide"
         },
         "step": {
             "user": {

homeassistant/components/abode/translations/hu.json

@@ -3,11 +3,6 @@
         "abort": {
             "single_instance_allowed": "Csak egyetlen Abode konfigur\u00e1ci\u00f3 enged\u00e9lyezett."
         },
-        "error": {
-            "connection_error": "Nem lehet csatlakozni az Abode-hez.",
-            "identifier_exists": "Fi\u00f3k m\u00e1r regisztr\u00e1lva van",
-            "invalid_credentials": "\u00c9rv\u00e9nytelen hiteles\u00edt\u0151 adatok"
-        },
         "step": {
             "user": {
                 "data": {

homeassistant/components/abode/translations/it.json

@@ -5,10 +5,7 @@
         },
         "error": {
             "cannot_connect": "Impossibile connettersi",
-            "connection_error": "Impossibile connettersi ad Abode.",
-            "identifier_exists": "Account gi\u00e0 registrato",
-            "invalid_auth": "Autenticazione non valida",
-            "invalid_credentials": "Credenziali non valide"
+            "invalid_auth": "Autenticazione non valida"
         },
         "step": {
             "user": {

homeassistant/components/abode/translations/ko.json

@@ -3,11 +3,6 @@
         "abort": {
             "single_instance_allowed": "\ud558\ub098\uc758 Abode \ub9cc \uad6c\uc131\ud560 \uc218 \uc788\uc2b5\ub2c8\ub2e4."
         },
-        "error": {
-            "connection_error": "Abode \uc5d0 \uc5f0\uacb0\ud560 \uc218 \uc5c6\uc2b5\ub2c8\ub2e4.",
-            "identifier_exists": "\uacc4\uc815\uc774 \uc774\ubbf8 \ub4f1\ub85d\ub418\uc5c8\uc2b5\ub2c8\ub2e4",
-            "invalid_credentials": "\uc0ac\uc6a9\uc790 \uc774\ub984 \ud639\uc740 \ube44\ubc00\ubc88\ud638\uac00 \uc798\ubabb\ub418\uc5c8\uc2b5\ub2c8\ub2e4"
-        },
         "step": {
             "user": {
                 "data": {

homeassistant/components/abode/translations/lb.json

@@ -1,14 +1,11 @@
 {
     "config": {
         "abort": {
-            "single_instance_allowed": "N\u00ebmmen eng eenzeg Konfiguratioun vun ZHA ass erlaabt."
+            "single_instance_allowed": "Scho konfigur\u00e9iert. N\u00ebmmen eng eenzeg Konfiguratioun m\u00e9iglech."
         },
         "error": {
             "cannot_connect": "Feeler beim verbannen",
-            "connection_error": "Kann sech net mat Abode verbannen.",
-            "identifier_exists": "Konto ass scho registr\u00e9iert",
-            "invalid_auth": "Ong\u00eblteg Authentifikatioun",
-            "invalid_credentials": "Ong\u00eblteg Login Informatioune"
+            "invalid_auth": "Ong\u00eblteg Authentifikatioun"
         },
         "step": {
             "user": {

homeassistant/components/abode/translations/nl.json

@@ -5,9 +5,7 @@
         },
         "error": {
             "cannot_connect": "Kan geen verbinding maken",
-            "connection_error": "Kan geen verbinding maken met Abode.",
-            "identifier_exists": "Account is al geregistreerd.",
-            "invalid_credentials": "Ongeldige inloggegevens."
+            "invalid_auth": "Ongeldige authenticatie"
         },
         "step": {
             "user": {

homeassistant/components/abode/translations/no.json

@@ -5,10 +5,7 @@
         },
         "error": {
             "cannot_connect": "Tilkobling mislyktes",
-            "connection_error": "Kan ikke koble til Abode.",
-            "identifier_exists": "Kontoen er allerede registrert.",
-            "invalid_auth": "Ugyldig godkjenning",
-            "invalid_credentials": "Ugyldig legitimasjon"
+            "invalid_auth": "Ugyldig godkjenning"
         },
         "step": {
             "user": {

homeassistant/components/abode/translations/pl.json

@@ -5,10 +5,7 @@
         },
         "error": {
             "cannot_connect": "Nie mo\u017cna nawi\u0105za\u0107 po\u0142\u0105czenia",
-            "connection_error": "Nie mo\u017cna po\u0142\u0105czy\u0107 si\u0119 z Abode",
-            "identifier_exists": "Konto jest ju\u017c zarejestrowane",
-            "invalid_auth": "Niepoprawne uwierzytelnienie",
-            "invalid_credentials": "Nieprawid\u0142owe dane uwierzytelniaj\u0105ce"
+            "invalid_auth": "Niepoprawne uwierzytelnienie"
         },
         "step": {
             "user": {

homeassistant/components/abode/translations/pt-BR.json

@@ -3,11 +3,6 @@
         "abort": {
             "single_instance_allowed": "Somente uma \u00fanica configura\u00e7\u00e3o de Abode \u00e9 permitida."
         },
-        "error": {
-            "connection_error": "N\u00e3o foi poss\u00edvel conectar ao Abode.",
-            "identifier_exists": "Conta j\u00e1 cadastrada.",
-            "invalid_credentials": "Credenciais inv\u00e1lidas."
-        },
         "step": {
             "user": {
                 "data": {

homeassistant/components/abode/translations/pt.json

@@ -1,8 +1,5 @@
 {
     "config": {
-        "error": {
-            "identifier_exists": "Conta j\u00e1 registada"
-        },
         "step": {
             "user": {
                 "data": {

homeassistant/components/abode/translations/ru.json

@@ -5,10 +5,7 @@
         },
         "error": {
             "cannot_connect": "\u041d\u0435 \u0443\u0434\u0430\u043b\u043e\u0441\u044c \u043f\u043e\u0434\u043a\u043b\u044e\u0447\u0438\u0442\u044c\u0441\u044f.",
-            "connection_error": "\u041d\u0435 \u0443\u0434\u0430\u043b\u043e\u0441\u044c \u043f\u043e\u0434\u043a\u043b\u044e\u0447\u0438\u0442\u044c\u0441\u044f \u043a Abode.",
-            "identifier_exists": "\u0423\u0447\u0451\u0442\u043d\u0430\u044f \u0437\u0430\u043f\u0438\u0441\u044c \u0443\u0436\u0435 \u0437\u0430\u0440\u0435\u0433\u0438\u0441\u0442\u0440\u0438\u0440\u043e\u0432\u0430\u043d\u0430.",
-            "invalid_auth": "\u041d\u0435\u0432\u0435\u0440\u043d\u0430\u044f \u0430\u0443\u0442\u0435\u043d\u0442\u0438\u0444\u0438\u043a\u0430\u0446\u0438\u044f.",
-            "invalid_credentials": "\u041d\u0435\u0432\u0435\u0440\u043d\u044b\u0435 \u0443\u0447\u0451\u0442\u043d\u044b\u0435 \u0434\u0430\u043d\u043d\u044b\u0435."
+            "invalid_auth": "\u041d\u0435\u0432\u0435\u0440\u043d\u0430\u044f \u0430\u0443\u0442\u0435\u043d\u0442\u0438\u0444\u0438\u043a\u0430\u0446\u0438\u044f."
         },
         "step": {
             "user": {

homeassistant/components/abode/translations/sl.json

@@ -3,11 +3,6 @@
         "abort": {
             "single_instance_allowed": "Dovoljena je samo ena konfiguracija Abode."
         },
-        "error": {
-            "connection_error": "Ni mogo\u010de vzpostaviti povezave z Abode.",
-            "identifier_exists": "Ra\u010dun je \u017ee registriran.",
-            "invalid_credentials": "Neveljavne poverilnice."
-        },
         "step": {
             "user": {
                 "data": {

homeassistant/components/abode/translations/sv.json

@@ -3,11 +3,6 @@
         "abort": {
             "single_instance_allowed": "Endast en enda konfiguration av Abode \u00e4r till\u00e5ten."
         },
-        "error": {
-            "connection_error": "Det gick inte att ansluta till Abode.",
-            "identifier_exists": "Kontot \u00e4r redan registrerat.",
-            "invalid_credentials": "Ogiltiga autentiseringsuppgifter."
-        },
         "step": {
             "user": {
                 "data": {

homeassistant/components/abode/translations/zh-Hant.json

@@ -5,10 +5,7 @@
         },
         "error": {
             "cannot_connect": "\u9023\u7dda\u5931\u6557",
-            "connection_error": "\u7121\u6cd5\u9023\u7dda\u81f3 Abode\u3002",
-            "identifier_exists": "\u5e33\u865f\u5df2\u8a3b\u518a\u3002",
-            "invalid_auth": "\u9a57\u8b49\u78bc\u7121\u6548",
-            "invalid_credentials": "\u6191\u8b49\u7121\u6548\u3002"
+            "invalid_auth": "\u9a57\u8b49\u78bc\u7121\u6548"
         },
         "step": {
             "user": {

homeassistant/components/accuweather/const.py

@@ -1,6 +1,7 @@
 """Constants for AccuWeather integration."""
 from homeassistant.const import (
     ATTR_DEVICE_CLASS,
+    CONCENTRATION_PARTS_PER_CUBIC_METER,
     DEVICE_CLASS_TEMPERATURE,
     LENGTH_FEET,
     LENGTH_INCHES,
@@ -13,7 +14,6 @@ from homeassistant.const import (
     TEMP_FAHRENHEIT,
     TIME_HOURS,
     UV_INDEX,
-    VOLUME_CUBIC_METERS,
 )
 
 ATTRIBUTION = "Data provided by AccuWeather"
@@ -22,7 +22,6 @@ ATTR_FORECAST = CONF_FORECAST = "forecast"
 ATTR_LABEL = "label"
 ATTR_UNIT_IMPERIAL = "Imperial"
 ATTR_UNIT_METRIC = "Metric"
-CONCENTRATION_PARTS_PER_CUBIC_METER = f"p/{VOLUME_CUBIC_METERS}"
 COORDINATOR = "coordinator"
 DOMAIN = "accuweather"
 MANUFACTURER = "AccuWeather, Inc."

homeassistant/components/accuweather/translations/de.json

@@ -4,7 +4,8 @@
             "user": {
                 "data": {
                     "latitude": "Breitengrad",
-                    "longitude": "L\u00e4ngengrad"
+                    "longitude": "L\u00e4ngengrad",
+                    "name": "Name"
                 },
                 "title": "AccuWeather"
             }

homeassistant/components/accuweather/translations/lb.json

@@ -16,7 +16,7 @@
                     "longitude": "L\u00e4ngegrad",
                     "name": "Numm"
                 },
-                "description": "Falls du H\u00ebllef mat der Konfiguratioun brauch kuck h\u00e9i:\nhttps://www.home-assistant.io/integrations/accuweather/\n\nWieder Pr\u00e9visounen si standardm\u00e9isseg net aktiv. Du kanns d\u00e9i an den Optioune vun der Integratioun aschalten.",
+                "description": "Falls du H\u00ebllef mat der Konfiguratioun brauch kuck h\u00e9i:\nhttps://www.home-assistant.io/integrations/accuweather/\n\nVerschidde Sensoren si standardm\u00e9isseg net aktiv. Du kanns d\u00e9i an der Entit\u00e9ie Registry no der Konfiguratioun vun der Integratioun aschalten.\n\nWieder Pr\u00e9visounen si standardm\u00e9isseg net aktiv. Du kanns d\u00e9i an den Optioune vun der Integratioun aschalten.",
                 "title": "AccuWeather"
             }
         }

homeassistant/components/accuweather/translations/nl.json

@@ -1,11 +1,30 @@
 {
     "config": {
+        "error": {
+            "invalid_api_key": "API-sleutel",
+            "requests_exceeded": "Het toegestane aantal verzoeken aan de Accuweather API is overschreden. U moet wachten of de API-sleutel wijzigen."
+        },
         "step": {
             "user": {
                 "data": {
+                    "api_key": "API-sleutel",
+                    "latitude": "Breedtegraad",
                     "longitude": "Lengtegraad",
                     "name": "Naam"
-                }
+                },
+                "description": "Als je hulp nodig hebt bij de configuratie, kijk dan hier: https://www.home-assistant.io/integrations/accuweather/ \n\n Sommige sensoren zijn niet standaard ingeschakeld. U kunt ze inschakelen in het entiteitenregister na de integratieconfiguratie.\n Weersvoorspelling is niet standaard ingeschakeld. U kunt het inschakelen in de integratieopties.",
+                "title": "AccuWeather"
+            }
+        }
+    },
+    "options": {
+        "step": {
+            "user": {
+                "data": {
+                    "forecast": "Weervoorspelling"
+                },
+                "description": "Vanwege de beperkingen van de gratis versie van de AccuWeather API-sleutel, worden gegevensupdates elke 64 minuten in plaats van elke 32 minuten uitgevoerd wanneer u weersvoorspelling inschakelt.",
+                "title": "AccuWeather-opties"
             }
         }
     }

homeassistant/components/accuweather/translations/no.json

@@ -16,7 +16,7 @@
                     "longitude": "Lengdegrad",
                     "name": "Navn"
                 },
-                "description": "Hvis du trenger hjelp med konfigurasjonen, kan du se her: https://www.home-assistant.io/integrations/accuweather/ \n\n Noen sensorer er ikke aktivert som standard. Du kan aktivere dem i enhetsregisteret etter integrasjonskonfigurasjonen. \n V\u00e6rmelding er ikke aktivert som standard. Du kan aktivere det i integrasjonsalternativene.",
+                "description": "Hvis du trenger hjelp med konfigurasjonen, kan du se her: https://www.home-assistant.io/integrations/accuweather/ \n\nNoen sensorer er ikke aktivert som standard. Du kan aktivere dem i entitetsregisteret etter integrasjonskonfigurasjonen. \nV\u00e6rmelding er ikke aktivert som standard. Du kan aktivere det i integrasjonsalternativene.",
                 "title": ""
             }
         }

homeassistant/components/accuweather/translations/sensor.nl.json

@@ -0,0 +1,9 @@
+{
+    "state": {
+        "accuweather__pressure_tendency": {
+            "falling": "Ondergang",
+            "rising": "Opkomst",
+            "steady": "Stabiel"
+        }
+    }
+}

homeassistant/components/acmeda/strings.json

@@ -1,5 +1,4 @@
 {
-  "title": "Rollease Acmeda Automate",
   "config": {
     "step": {
       "user": {

homeassistant/components/acmeda/translations/ca.json

@@ -1,7 +1,6 @@
 {
     "config": {
         "abort": {
-            "all_configured": "No s'han descobert nous hubs de Pulse.",
             "no_devices_found": "No s'han trobat dispositius a la xarxa"
         },
         "step": {
@@ -12,6 +11,5 @@
                 "title": "Selecci\u00f3 del Hub a afegir"
             }
         }
-    },
-    "title": "Rollease Acmeda Automate"
+    }
 }

homeassistant/components/acmeda/translations/cs.json

@@ -2,6 +2,13 @@
     "config": {
         "abort": {
             "no_devices_found": "V s\u00edti nebyla nalezena \u017e\u00e1dn\u00e1 za\u0159\u00edzen\u00ed"
+        },
+        "step": {
+            "user": {
+                "data": {
+                    "id": "ID hostitele"
+                }
+            }
         }
     }
 }

homeassistant/components/acmeda/translations/en.json

@@ -1,7 +1,6 @@
 {
     "config": {
         "abort": {
-            "all_configured": "No new Pulse hubs discovered.",
             "no_devices_found": "No devices found on the network"
         },
         "step": {
@@ -12,6 +11,5 @@
                 "title": "Pick a hub to add"
             }
         }
-    },
-    "title": "Rollease Acmeda Automate"
+    }
 }

homeassistant/components/acmeda/translations/es.json

@@ -1,7 +1,6 @@
 {
     "config": {
         "abort": {
-            "all_configured": "No se han descubierto nuevos hubs Pulse.",
             "no_devices_found": "No se encontraron dispositivos en la red"
         },
         "step": {
@@ -12,6 +11,5 @@
                 "title": "Elige un hub para a\u00f1adir"
             }
         }
-    },
-    "title": "Rollease Acmeda Automate"
+    }
 }

homeassistant/components/acmeda/translations/et.json

@@ -1,7 +1,6 @@
 {
     "config": {
         "abort": {
-            "all_configured": "Uusi Pulse'i jaotureid ei avastatud.",
             "no_devices_found": "V\u00f5rgus ei tuvastatud \u00fchtegi seadet"
         },
         "step": {
@@ -12,6 +11,5 @@
                 "title": "Vali lisatav jaotur"
             }
         }
-    },
-    "title": ""
+    }
 }

homeassistant/components/acmeda/translations/fr.json

@@ -1,7 +1,6 @@
 {
     "config": {
         "abort": {
-            "all_configured": "Aucun nouveau hub Pulse n'a \u00e9t\u00e9 d\u00e9couvert.",
             "no_devices_found": "Aucun appareil trouv\u00e9 sur le r\u00e9seau"
         },
         "step": {
@@ -12,6 +11,5 @@
                 "title": "Choisissez un hub \u00e0 ajouter"
             }
         }
-    },
-    "title": "Rollease Acmeda Automate"
+    }
 }

homeassistant/components/acmeda/translations/it.json

@@ -1,7 +1,6 @@
 {
     "config": {
         "abort": {
-            "all_configured": "Non sono stati scoperti nuovi hub Pulse.",
             "no_devices_found": "Nessun dispositivo trovato sulla rete"
         },
         "step": {
@@ -12,6 +11,5 @@
                 "title": "Scegliere un hub da aggiungere"
             }
         }
-    },
-    "title": "Rollease Acmeda Automate"
+    }
 }

homeassistant/components/acmeda/translations/ko.json

@@ -1,8 +1,5 @@
 {
     "config": {
-        "abort": {
-            "all_configured": "\ubc1c\uacac\ub41c \uc0c8\ub85c\uc6b4 Pulse \ud5c8\ube0c\uac00 \uc5c6\uc2b5\ub2c8\ub2e4."
-        },
         "step": {
             "user": {
                 "data": {
@@ -11,6 +8,5 @@
                 "title": "\ucd94\uac00\ud560 \ud5c8\ube0c \uc120\ud0dd\ud558\uae30"
             }
         }
-    },
-    "title": "Rollease Acmeda Automate"
+    }
 }

homeassistant/components/acmeda/translations/lb.json

@@ -1,7 +1,7 @@
 {
     "config": {
         "abort": {
-            "all_configured": "Keng nei Pulse Hubs entdeckt."
+            "no_devices_found": "Keng Apparater am Netzwierk fonnt"
         },
         "step": {
             "user": {
@@ -11,6 +11,5 @@
                 "title": "Wiel den Hub aus dee soll dob\u00e4igesat ginn."
             }
         }
-    },
-    "title": "Rollease ACmeda Automate"
+    }
 }

homeassistant/components/acmeda/translations/nl.json

@@ -1,8 +1,5 @@
 {
     "config": {
-        "abort": {
-            "all_configured": "Geen nieuwe Pulse hubs ontdekt."
-        },
         "step": {
             "user": {
                 "data": {
@@ -11,6 +8,5 @@
                 "title": "Kies een hub om toe te voegen"
             }
         }
-    },
-    "title": "Rollease Acmeda Automate"
+    }
 }

homeassistant/components/acmeda/translations/no.json

@@ -1,7 +1,6 @@
 {
     "config": {
         "abort": {
-            "all_configured": "Ingen nye Pulse-hub oppdaget.",
             "no_devices_found": "Ingen enheter funnet p\u00e5 nettverket"
         },
         "step": {
@@ -12,6 +11,5 @@
                 "title": "Velg en hub du vil legge til"
             }
         }
-    },
-    "title": ""
+    }
 }

homeassistant/components/acmeda/translations/pl.json

@@ -1,7 +1,6 @@
 {
     "config": {
         "abort": {
-            "all_configured": "Nie wykryto hub\u00f3w Pulse",
             "no_devices_found": "Nie znaleziono urz\u0105dze\u0144 w sieci"
         },
         "step": {
@@ -12,6 +11,5 @@
                 "title": "Wybierz hub, kt\u00f3ry chcesz doda\u0107"
             }
         }
-    },
-    "title": "Rollease Acmeda Automate"
+    }
 }

homeassistant/components/acmeda/translations/ru.json

@@ -1,7 +1,6 @@
 {
     "config": {
         "abort": {
-            "all_configured": "\u0423\u0441\u0442\u0440\u043e\u0439\u0441\u0442\u0432\u0430 \u043d\u0435 \u043e\u0431\u043d\u0430\u0440\u0443\u0436\u0435\u043d\u044b.",
             "no_devices_found": "\u0423\u0441\u0442\u0440\u043e\u0439\u0441\u0442\u0432\u0430 \u043d\u0435 \u043d\u0430\u0439\u0434\u0435\u043d\u044b \u0432 \u0441\u0435\u0442\u0438."
         },
         "step": {
@@ -12,6 +11,5 @@
                 "title": "\u0412\u044b\u0431\u0435\u0440\u0438\u0442\u0435 \u0445\u0430\u0431, \u043a\u043e\u0442\u043e\u0440\u044b\u0439 \u043d\u0443\u0436\u043d\u043e \u0434\u043e\u0431\u0430\u0432\u0438\u0442\u044c"
             }
         }
-    },
-    "title": "Rollease Acmeda Automate"
+    }
 }

homeassistant/components/acmeda/translations/zh-Hant.json

@@ -1,7 +1,6 @@
 {
     "config": {
         "abort": {
-            "all_configured": "\u672a\u641c\u5c0b\u5230 Pulse hub",
             "no_devices_found": "\u7db2\u8def\u4e0a\u627e\u4e0d\u5230\u8a2d\u5099"
         },
         "step": {
@@ -12,6 +11,5 @@
                 "title": "\u9078\u64c7\u6240\u8981\u65b0\u589e\u7684 Hub"
             }
         }
-    },
-    "title": "Rollease Acmeda Automate"
+    }
 }

homeassistant/components/adguard/translations/bg.json

@@ -4,9 +4,6 @@
             "existing_instance_updated": "\u0410\u043a\u0442\u0443\u0430\u043b\u0438\u0437\u0438\u0440\u0430\u043d\u0435 \u043d\u0430 \u0441\u044a\u0449\u0435\u0441\u0442\u0432\u0443\u0432\u0430\u0449\u0430\u0442\u0430 \u043a\u043e\u043d\u0444\u0438\u0433\u0443\u0440\u0430\u0446\u0438\u044f.",
             "single_instance_allowed": "\u0420\u0430\u0437\u0440\u0435\u0448\u0435\u043d\u0430 \u0435 \u0441\u0430\u043c\u043e \u0435\u0434\u043d\u0430 \u043a\u043e\u043d\u0444\u0438\u0433\u0443\u0440\u0430\u0446\u0438\u044f \u043d\u0430 AdGuard Home."
         },
-        "error": {
-            "connection_error": "\u041d\u0435\u0443\u0441\u043f\u0435\u0448\u043d\u043e \u0441\u0432\u044a\u0440\u0437\u0432\u0430\u043d\u0435."
-        },
         "step": {
             "hassio_confirm": {
                 "description": "\u0418\u0441\u043a\u0430\u0442\u0435 \u043b\u0438 \u0434\u0430 \u043a\u043e\u043d\u0444\u0438\u0433\u0443\u0440\u0438\u0440\u0430\u0442\u0435 Home Assistant \u0434\u0430 \u0441\u0435 \u0441\u0432\u044a\u0440\u0437\u0432\u0430 \u0441 AdGuard Home, \u043f\u0440\u0435\u0434\u043e\u0441\u0442\u0430\u0432\u0435\u043d \u043e\u0442 Hass.io \u0434\u043e\u0431\u0430\u0432\u043a\u0430\u0442\u0430: {addon} ?",

homeassistant/components/adguard/translations/ca.json

@@ -5,8 +5,7 @@
             "single_instance_allowed": "Ja configurat. Nom\u00e9s \u00e9s possible una sola configuraci\u00f3."
         },
         "error": {
-            "cannot_connect": "Ha fallat la connexi\u00f3",
-            "connection_error": "No s'ha pogut connectar."
+            "cannot_connect": "Ha fallat la connexi\u00f3"
         },
         "step": {
             "hassio_confirm": {

homeassistant/components/adguard/translations/cs.json

@@ -5,8 +5,7 @@
             "single_instance_allowed": "Ji\u017e nastaveno. Je mo\u017en\u00e1 pouze jedin\u00e1 konfigurace."
         },
         "error": {
-            "cannot_connect": "Nepoda\u0159ilo se p\u0159ipojit",
-            "connection_error": "Nepoda\u0159ilo se p\u0159ipojit."
+            "cannot_connect": "Nepoda\u0159ilo se p\u0159ipojit"
         },
         "step": {
             "hassio_confirm": {
@@ -21,7 +20,8 @@
                     "ssl": "Pou\u017e\u00edv\u00e1 SSL certifik\u00e1t",
                     "username": "U\u017eivatelsk\u00e9 jm\u00e9no",
                     "verify_ssl": "Ov\u011b\u0159it certifik\u00e1t SSL"
-                }
+                },
+                "description": "Nastavte svou instanci AdGuard Home pro monitorov\u00e1n\u00ed a \u0159\u00edzen\u00ed."
             }
         }
     }

homeassistant/components/adguard/translations/da.json

@@ -4,9 +4,6 @@
             "existing_instance_updated": "Opdaterede eksisterende konfiguration.",
             "single_instance_allowed": "Kun en enkelt konfiguration af AdGuard Home er tilladt."
         },
-        "error": {
-            "connection_error": "Forbindelse mislykkedes."
-        },
         "step": {
             "hassio_confirm": {
                 "description": "Vil du konfigurere Home Assistant til at oprette forbindelse til AdGuard Home leveret af Hass.io-tilf\u00f8jelsen: {addon}?",

homeassistant/components/adguard/translations/de.json

@@ -4,9 +4,6 @@
             "existing_instance_updated": "Bestehende Konfiguration wurde aktualisiert.",
             "single_instance_allowed": "Es ist nur eine einzige Konfiguration von AdGuard Home zul\u00e4ssig."
         },
-        "error": {
-            "connection_error": "Fehler beim Herstellen einer Verbindung."
-        },
         "step": {
             "hassio_confirm": {
                 "description": "M\u00f6chtest du Home Assistant so konfigurieren, dass eine Verbindung mit AdGuard Home als Hass.io-Add-On hergestellt wird: {addon}?",

homeassistant/components/adguard/translations/en.json

@@ -5,8 +5,7 @@
             "single_instance_allowed": "Already configured. Only a single configuration possible."
         },
         "error": {
-            "cannot_connect": "Failed to connect",
-            "connection_error": "Failed to connect."
+            "cannot_connect": "Failed to connect"
         },
         "step": {
             "hassio_confirm": {

homeassistant/components/adguard/translations/es-419.json

@@ -4,9 +4,6 @@
             "existing_instance_updated": "Se actualiz\u00f3 la configuraci\u00f3n existente.",
             "single_instance_allowed": "Solo se permite una \u00fanica configuraci\u00f3n de AdGuard Home."
         },
-        "error": {
-            "connection_error": "Error al conectar."
-        },
         "step": {
             "hassio_confirm": {
                 "description": "\u00bfDesea configurar Home Assistant para conectarse a la p\u00e1gina principal de AdGuard proporcionada por el complemento Hass.io: {addon}?",

homeassistant/components/adguard/translations/es.json

@@ -5,8 +5,7 @@
             "single_instance_allowed": "S\u00f3lo se permite una \u00fanica configuraci\u00f3n de AdGuard Home."
         },
         "error": {
-            "cannot_connect": "No se pudo conectar",
-            "connection_error": "No se conect\u00f3."
+            "cannot_connect": "No se pudo conectar"
         },
         "step": {
             "hassio_confirm": {

homeassistant/components/adguard/translations/et.json

@@ -5,8 +5,7 @@
             "single_instance_allowed": "Juba seadistatud. V\u00f5imalik on ainult \u00fcks seadistamine."
         },
         "error": {
-            "cannot_connect": "\u00dchendamine nurjus",
-            "connection_error": "\u00dchenduse loomine nurjus"
+            "cannot_connect": "\u00dchendamine nurjus"
         },
         "step": {
             "hassio_confirm": {

homeassistant/components/adguard/translations/fi.json

@@ -1,8 +1,5 @@
 {
     "config": {
-        "error": {
-            "connection_error": "Yhdist\u00e4minen ep\u00e4onnistui."
-        },
         "step": {
             "user": {
                 "data": {

homeassistant/components/adguard/translations/fr.json

@@ -5,8 +5,7 @@
             "single_instance_allowed": "Une seule configuration d'AdGuard Home est autoris\u00e9e."
         },
         "error": {
-            "cannot_connect": "\u00c9chec de connexion",
-            "connection_error": "\u00c9chec de connexion."
+            "cannot_connect": "\u00c9chec de connexion"
         },
         "step": {
             "hassio_confirm": {

homeassistant/components/adguard/translations/id.json

@@ -1,8 +1,5 @@
 {
     "config": {
-        "error": {
-            "connection_error": "Gagal terhubung."
-        },
         "step": {
             "user": {
                 "data": {

homeassistant/components/adguard/translations/it.json

@@ -5,8 +5,7 @@
             "single_instance_allowed": "Gi\u00e0 configurato. \u00c8 possibile una sola configurazione."
         },
         "error": {
-            "cannot_connect": "Impossibile connettersi",
-            "connection_error": "Impossibile connettersi."
+            "cannot_connect": "Impossibile connettersi"
         },
         "step": {
             "hassio_confirm": {

homeassistant/components/adguard/translations/ko.json

@@ -4,9 +4,6 @@
             "existing_instance_updated": "\uae30\uc874 \uad6c\uc131\uc744 \uc5c5\ub370\uc774\ud2b8\ud588\uc2b5\ub2c8\ub2e4.",
             "single_instance_allowed": "\ud558\ub098\uc758 AdGuard Home \ub9cc \uad6c\uc131\ud560 \uc218 \uc788\uc2b5\ub2c8\ub2e4."
         },
-        "error": {
-            "connection_error": "\uc5f0\uacb0\ud558\uc9c0 \ubabb\ud588\uc2b5\ub2c8\ub2e4."
-        },
         "step": {
             "hassio_confirm": {
                 "description": "Hass.io {addon} \uc560\ub4dc\uc628\uc73c\ub85c AdGuard Home \uc5d0 \uc5f0\uacb0\ud558\ub3c4\ub85d Home Assistant \ub97c \uad6c\uc131\ud558\uc2dc\uaca0\uc2b5\ub2c8\uae4c?",

homeassistant/components/adguard/translations/lb.json

@@ -2,11 +2,10 @@
     "config": {
         "abort": {
             "existing_instance_updated": "D\u00e9i bestehend Konfiguratioun ass ge\u00e4nnert.",
-            "single_instance_allowed": "N\u00ebmmen eng eenzeg Konfiguratioun vun AdGuard Home ass erlaabt."
+            "single_instance_allowed": "Scho konfigur\u00e9iert. N\u00ebmmen eng eenzeg Konfiguratioun m\u00e9iglech."
         },
         "error": {
-            "cannot_connect": "Feeler beim verbannen",
-            "connection_error": "Feeler beim verbannen."
+            "cannot_connect": "Feeler beim verbannen"
         },
         "step": {
             "hassio_confirm": {
@@ -18,9 +17,9 @@
                     "host": "Host",
                     "password": "Passwuert",
                     "port": "Port",
-                    "ssl": "AdGuard Home benotzt een SSL Zertifikat",
+                    "ssl": "Benotzt een SSL Zertifikat",
                     "username": "Benotzernumm",
-                    "verify_ssl": "AdGuard Home benotzt een eegenen Zertifikat"
+                    "verify_ssl": "SSL Zertifikat iwwerpr\u00e9iwen"
                 },
                 "description": "Konfigur\u00e9iert \u00e4r AdGuard Home Instanz fir d'Iwwerwaachung an d'Kontroll z'erlaben."
             }

homeassistant/components/adguard/translations/nl.json

@@ -5,8 +5,7 @@
             "single_instance_allowed": "Slechts \u00e9\u00e9n configuratie van AdGuard Home is toegestaan."
         },
         "error": {
-            "cannot_connect": "Kan geen verbinding maken",
-            "connection_error": "Kon niet verbinden."
+            "cannot_connect": "Kan geen verbinding maken"
         },
         "step": {
             "hassio_confirm": {
@@ -15,6 +14,7 @@
             },
             "user": {
                 "data": {
+                    "host": "Host",
                     "password": "Wachtwoord",
                     "port": "Poort",
                     "ssl": "AdGuard Home maakt gebruik van een SSL certificaat",

homeassistant/components/adguard/translations/no.json

@@ -5,8 +5,7 @@
             "single_instance_allowed": "Allerede konfigurert. Bare \u00e9n enkelt konfigurasjon er mulig."
         },
         "error": {
-            "cannot_connect": "Tilkobling mislyktes",
-            "connection_error": "Tilkobling mislyktes."
+            "cannot_connect": "Tilkobling mislyktes"
         },
         "step": {
             "hassio_confirm": {

homeassistant/components/adguard/translations/pl.json

@@ -5,8 +5,7 @@
             "single_instance_allowed": "Ju\u017c skonfigurowano. Mo\u017cliwa jest tylko jedna konfiguracja."
         },
         "error": {
-            "cannot_connect": "Nie mo\u017cna nawi\u0105za\u0107 po\u0142\u0105czenia",
-            "connection_error": "Nie mo\u017cna nawi\u0105za\u0107 po\u0142\u0105czenia"
+            "cannot_connect": "Nie mo\u017cna nawi\u0105za\u0107 po\u0142\u0105czenia"
         },
         "step": {
             "hassio_confirm": {

homeassistant/components/adguard/translations/pt-BR.json

@@ -4,9 +4,6 @@
             "existing_instance_updated": "Configura\u00e7\u00e3o existente atualizada.",
             "single_instance_allowed": "Apenas uma \u00fanica configura\u00e7\u00e3o do AdGuard Home \u00e9 permitida."
         },
-        "error": {
-            "connection_error": "Falhou ao conectar."
-        },
         "step": {
             "hassio_confirm": {
                 "description": "Deseja configurar o Home Assistant para se conectar ao AdGuard Home fornecido pelo complemento Hass.io: {addon} ?",

homeassistant/components/adguard/translations/pt.json

@@ -1,8 +1,5 @@
 {
     "config": {
-        "error": {
-            "connection_error": "Falha na liga\u00e7\u00e3o"
-        },
         "step": {
             "hassio_confirm": {
                 "title": "AdGuard Home via Hass.io add-on"

homeassistant/components/adguard/translations/ru.json

@@ -5,13 +5,12 @@
             "single_instance_allowed": "\u041d\u0430\u0441\u0442\u0440\u043e\u0439\u043a\u0430 \u0443\u0436\u0435 \u0432\u044b\u043f\u043e\u043b\u043d\u0435\u043d\u0430. \u0412\u043e\u0437\u043c\u043e\u0436\u043d\u043e \u0434\u043e\u0431\u0430\u0432\u0438\u0442\u044c \u0442\u043e\u043b\u044c\u043a\u043e \u043e\u0434\u043d\u0443 \u043a\u043e\u043d\u0444\u0438\u0433\u0443\u0440\u0430\u0446\u0438\u044e."
         },
         "error": {
-            "cannot_connect": "\u041d\u0435 \u0443\u0434\u0430\u043b\u043e\u0441\u044c \u043f\u043e\u0434\u043a\u043b\u044e\u0447\u0438\u0442\u044c\u0441\u044f.",
-            "connection_error": "\u041e\u0448\u0438\u0431\u043a\u0430 \u043f\u043e\u0434\u043a\u043b\u044e\u0447\u0435\u043d\u0438\u044f."
+            "cannot_connect": "\u041d\u0435 \u0443\u0434\u0430\u043b\u043e\u0441\u044c \u043f\u043e\u0434\u043a\u043b\u044e\u0447\u0438\u0442\u044c\u0441\u044f."
         },
         "step": {
             "hassio_confirm": {
-                "description": "\u0412\u044b \u0443\u0432\u0435\u0440\u0435\u043d\u044b, \u0447\u0442\u043e \u0445\u043e\u0442\u0438\u0442\u0435 \u043d\u0430\u0441\u0442\u0440\u043e\u0438\u0442\u044c \u043f\u043e\u0434\u043a\u043b\u044e\u0447\u0435\u043d\u0438\u0435 \u043a AdGuard Home (\u0440\u0430\u0441\u0448\u0438\u0440\u0435\u043d\u0438\u0435 \u0434\u043b\u044f Hass.io \"{addon}\")?",
-                "title": "AdGuard Home (\u0440\u0430\u0441\u0448\u0438\u0440\u0435\u043d\u0438\u0435 \u0434\u043b\u044f Hass.io)"
+                "description": "\u0412\u044b \u0443\u0432\u0435\u0440\u0435\u043d\u044b, \u0447\u0442\u043e \u0445\u043e\u0442\u0438\u0442\u0435 \u043d\u0430\u0441\u0442\u0440\u043e\u0438\u0442\u044c \u043f\u043e\u0434\u043a\u043b\u044e\u0447\u0435\u043d\u0438\u0435 \u043a AdGuard Home (\u0434\u043e\u043f\u043e\u043b\u043d\u0435\u043d\u0438\u0435 \u0434\u043b\u044f Hass.io \"{addon}\")?",
+                "title": "AdGuard Home (\u0434\u043e\u043f\u043e\u043b\u043d\u0435\u043d\u0438\u0435 \u0434\u043b\u044f Hass.io)"
             },
             "user": {
                 "data": {

homeassistant/components/adguard/translations/sl.json

@@ -4,9 +4,6 @@
             "existing_instance_updated": "Posodobljena obstoje\u010da konfiguracija.",
             "single_instance_allowed": "Dovoljena je samo ena konfiguracija AdGuard Home."
         },
-        "error": {
-            "connection_error": "Povezava ni uspela."
-        },
         "step": {
             "hassio_confirm": {
                 "description": "\u017delite konfigurirati Home Assistant-a za povezavo z AdGuard Home, ki ga ponuja Hass.io add-on {addon} ?",

homeassistant/components/adguard/translations/sv.json

@@ -4,9 +4,6 @@
             "existing_instance_updated": "Uppdaterade existerande konfiguration.",
             "single_instance_allowed": "Endast en enda konfiguration av AdGuard Home \u00e4r till\u00e5ten."
         },
-        "error": {
-            "connection_error": "Det gick inte att ansluta."
-        },
         "step": {
             "hassio_confirm": {
                 "description": "Vill du konfigurera Home Assistant f\u00f6r att ansluta till AdGuard Home som tillhandah\u00e5lls av Hass.io Add-on: {addon}?",

homeassistant/components/adguard/translations/zh-Hans.json

@@ -3,9 +3,6 @@
         "abort": {
             "existing_instance_updated": "\u66f4\u65b0\u4e86\u73b0\u6709\u914d\u7f6e\u3002"
         },
-        "error": {
-            "connection_error": "\u8fde\u63a5\u5931\u8d25\u3002"
-        },
         "step": {
             "user": {
                 "data": {

homeassistant/components/adguard/translations/zh-Hant.json

@@ -5,8 +5,7 @@
             "single_instance_allowed": "\u50c5\u80fd\u8a2d\u5b9a\u4e00\u7d44\u8a2d\u5099\u3002"
         },
         "error": {
-            "cannot_connect": "\u9023\u7dda\u5931\u6557",
-            "connection_error": "\u9023\u7dda\u5931\u6557\u3002"
+            "cannot_connect": "\u9023\u7dda\u5931\u6557"
         },
         "step": {
             "hassio_confirm": {

homeassistant/components/ads/light.py

@@ -68,10 +68,9 @@ class AdsLight(AdsEntity, LightEntity):
     @property
     def supported_features(self):
         """Flag supported features."""
-        support = 0
         if self._ads_var_brightness is not None:
-            support = SUPPORT_BRIGHTNESS
-        return support
+            return SUPPORT_BRIGHTNESS
+        return 0
 
     @property
     def is_on(self):

homeassistant/components/advantage_air/strings.json

@@ -1,6 +1,5 @@
 {
   "config": {
-    "flow_title": "Advantage Air Setup",
     "error": {
       "cannot_connect": "[%key:common::config_flow::error::cannot_connect%]"
     },
@@ -17,6 +16,5 @@
         "title": "Connect"
       }
     }
-  },
-  "title": "Advantage Air"
-}
+  }
+}

homeassistant/components/advantage_air/translations/ca.json

@@ -6,7 +6,6 @@
         "error": {
             "cannot_connect": "Ha fallat la connexi\u00f3"
         },
-        "flow_title": "Configuraci\u00f3 d'Advantage Air",
         "step": {
             "user": {
                 "data": {
@@ -17,6 +16,5 @@
                 "title": "Connecta"
             }
         }
-    },
-    "title": "Advantage Air"
+    }
 }

homeassistant/components/advantage_air/translations/cs.json

@@ -6,16 +6,15 @@
         "error": {
             "cannot_connect": "Nepoda\u0159ilo se p\u0159ipojit"
         },
-        "flow_title": "Nastaven\u00ed Advantage Air",
         "step": {
             "user": {
                 "data": {
                     "ip_address": "IP adresa",
                     "port": "Port"
                 },
+                "description": "P\u0159ipojte se k API va\u0161eho n\u00e1st\u011bnn\u00e9ho tabletu Advantage Air.",
                 "title": "P\u0159ipojit"
             }
         }
-    },
-    "title": "Advantage Air"
+    }
 }

homeassistant/components/advantage_air/translations/en.json

@@ -6,7 +6,6 @@
         "error": {
             "cannot_connect": "Failed to connect"
         },
-        "flow_title": "Advantage Air Setup",
         "step": {
             "user": {
                 "data": {
@@ -17,6 +16,5 @@
                 "title": "Connect"
             }
         }
-    },
-    "title": "Advantage Air"
+    }
 }

homeassistant/components/advantage_air/translations/es.json

@@ -6,7 +6,6 @@
         "error": {
             "cannot_connect": "No se pudo conectar"
         },
-        "flow_title": "Configuraci\u00f3n de Advantage Air",
         "step": {
             "user": {
                 "data": {
@@ -17,6 +16,5 @@
                 "title": "Conectar"
             }
         }
-    },
-    "title": "Advantage Air"
+    }
 }

homeassistant/components/advantage_air/translations/et.json

@@ -6,7 +6,6 @@
         "error": {
             "cannot_connect": "\u00dchendus nurjus"
         },
-        "flow_title": "Advantage Air-i seadistamine",
         "step": {
             "user": {
                 "data": {
@@ -17,6 +16,5 @@
                 "title": "\u00dchenda"
             }
         }
-    },
-    "title": ""
+    }
 }

homeassistant/components/advantage_air/translations/fr.json

@@ -0,0 +1,20 @@
+{
+    "config": {
+        "abort": {
+            "already_configured": "L'appareil est d\u00e9j\u00e0 configur\u00e9"
+        },
+        "error": {
+            "cannot_connect": "\u00c9chec de connexion"
+        },
+        "step": {
+            "user": {
+                "data": {
+                    "ip_address": "Adresse IP",
+                    "port": "Port"
+                },
+                "description": "Connectez-vous \u00e0 l'API de votre tablette murale Advantage Air.",
+                "title": "Connecter"
+            }
+        }
+    }
+}

homeassistant/components/advantage_air/translations/it.json

@@ -6,7 +6,6 @@
         "error": {
             "cannot_connect": "Impossibile connettersi"
         },
-        "flow_title": "Configurazione di Advantage Air",
         "step": {
             "user": {
                 "data": {
@@ -17,6 +16,5 @@
                 "title": "Connetti"
             }
         }
-    },
-    "title": "Advantage Air"
+    }
 }

homeassistant/components/advantage_air/translations/lb.json

@@ -0,0 +1,20 @@
+{
+    "config": {
+        "abort": {
+            "already_configured": "Apparat ass scho konfigur\u00e9iert"
+        },
+        "error": {
+            "cannot_connect": "Feeler beim verbannen"
+        },
+        "step": {
+            "user": {
+                "data": {
+                    "ip_address": "IP Adresse",
+                    "port": "Port"
+                },
+                "description": "Mat der API vun dengem Advantage Air Tablet verbannen",
+                "title": "Verbannen"
+            }
+        }
+    }
+}

homeassistant/components/advantage_air/translations/nl.json

@@ -1,13 +1,16 @@
 {
     "config": {
+        "abort": {
+            "already_configured": "Apparaat is al geconfigureerd"
+        },
         "step": {
             "user": {
                 "data": {
                     "port": "Poort"
                 },
+                "description": "Maak verbinding met de API van uw Advantage Air-tablet voor wandmontage.",
                 "title": "Verbind"
             }
         }
-    },
-    "title": "Advantage Air"
+    }
 }

homeassistant/components/advantage_air/translations/no.json

@@ -6,7 +6,6 @@
         "error": {
             "cannot_connect": "Tilkobling mislyktes"
         },
-        "flow_title": "[VOID] oppsett",
         "step": {
             "user": {
                 "data": {
@@ -17,6 +16,5 @@
                 "title": "Koble til"
             }
         }
-    },
-    "title": ""
+    }
 }

homeassistant/components/advantage_air/translations/pl.json

@@ -6,7 +6,6 @@
         "error": {
             "cannot_connect": "Nie mo\u017cna nawi\u0105za\u0107 po\u0142\u0105czenia"
         },
-        "flow_title": "Konfiguracja Advantage Air",
         "step": {
             "user": {
                 "data": {
@@ -17,6 +16,5 @@
                 "title": "Po\u0142\u0105czenie"
             }
         }
-    },
-    "title": "Advantage Air"
+    }
 }

homeassistant/components/advantage_air/translations/ru.json

@@ -6,17 +6,15 @@
         "error": {
             "cannot_connect": "\u041d\u0435 \u0443\u0434\u0430\u043b\u043e\u0441\u044c \u043f\u043e\u0434\u043a\u043b\u044e\u0447\u0438\u0442\u044c\u0441\u044f."
         },
-        "flow_title": "\u041d\u0430\u0441\u0442\u0440\u043e\u0439\u043a\u0430 Advantage Air",
         "step": {
             "user": {
                 "data": {
                     "ip_address": "IP-\u0430\u0434\u0440\u0435\u0441",
                     "port": "\u041f\u043e\u0440\u0442"
                 },
-                "description": "\u041f\u043e\u0434\u043a\u043b\u044e\u0447\u0438\u0442\u0435\u0441\u044c \u043a API \u0412\u0430\u0448\u0435\u0433\u043e \u043d\u0430\u0441\u0442\u0435\u043d\u043d\u043e\u0433\u043e \u043f\u043b\u0430\u043d\u0448\u0435\u0442\u0430 Advantage Air.",
+                "description": "\u041f\u043e\u0434\u043a\u043b\u044e\u0447\u0435\u043d\u0438\u0435 \u043a API \u0412\u0430\u0448\u0435\u0433\u043e \u043d\u0430\u0441\u0442\u0435\u043d\u043d\u043e\u0433\u043e \u043f\u043b\u0430\u043d\u0448\u0435\u0442\u0430 Advantage Air.",
                 "title": "\u041d\u0430\u0441\u0442\u0440\u043e\u0439\u043a\u0430 \u043f\u043e\u0434\u043a\u043b\u044e\u0447\u0435\u043d\u0438\u044f"
             }
         }
-    },
-    "title": "Advantage Air"
+    }
 }

homeassistant/components/advantage_air/translations/zh-Hans.json

@@ -1,5 +1,8 @@
 {
     "config": {
+        "error": {
+            "cannot_connect": "\u8fde\u63a5\u5931\u8d25"
+        },
         "step": {
             "user": {
                 "data": {

homeassistant/components/advantage_air/translations/zh-Hant.json

@@ -6,7 +6,6 @@
         "error": {
             "cannot_connect": "\u9023\u7dda\u5931\u6557"
         },
-        "flow_title": "Advantage Air \u8a2d\u5b9a",
         "step": {
             "user": {
                 "data": {
@@ -17,6 +16,5 @@
                 "title": "\u9023\u63a5"
             }
         }
-    },
-    "title": "Advantage Air"
+    }
 }

homeassistant/components/agent_dvr/strings.json

@@ -1,5 +1,4 @@
 {
-  "title": "Agent DVR",
   "config": {
     "step": {
       "user": {

homeassistant/components/agent_dvr/translations/ca.json

@@ -5,8 +5,7 @@
         },
         "error": {
             "already_in_progress": "El flux de configuraci\u00f3 ja est\u00e0 en curs",
-            "cannot_connect": "Ha fallat la connexi\u00f3",
-            "device_unavailable": "Dispositiu no est\u00e0 disponible"
+            "cannot_connect": "Ha fallat la connexi\u00f3"
         },
         "step": {
             "user": {
@@ -17,6 +16,5 @@
                 "title": "Configuraci\u00f3 de Agent DVR"
             }
         }
-    },
-    "title": "Agent DVR"
+    }
 }