EFeru/hoverboard-firmware-hack-FOC
1
0
Fork 1
mirror of https://github.com/EFeru/hoverboard-firmware-hack-FOC.git synced 2025-08-04 18:14:28 +02:00
Code Issues Packages Projects Releases Wiki Activity

Updated Variant PPM (markdown)

Candas1
2023-02-14 08:33:47 +01:00
parent 961625a7ac
commit 843e847a32
1 changed files with 1 additions and 1 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
Variant-PPM.md

@@ -35,6 +35,6 @@ If the board is [beeping](https://github.com/EmanuelFeru/hoverboard-firmware-hac
* Make sure you use the PPM port on your receiver
* Make sure you are using the sensor cable(left=CONTROL_PPM_LEFT or right=CONTROL_PPM_RIGHT) selected in config.h
* On some boards the wire colors might differ, try the blue wire
* You might have a defective input, because of a fried resistor or MCU pin (e.g. [issue](https://github.com/EFeru/hoverboard-firmware-hack-FOC/issues/244)), you can configure the firmware to work on the other cable
* You might have a defective MCU input, a missing 101 smd resistor or with too high resistance (e.g. [issue](https://github.com/EFeru/hoverboard-firmware-hack-FOC/issues/244)), you can configure the firmware to work on the other cable
If you get unwanted movements, check the wiring section.