Merge branch 'release/v3.1.0'

* develop: (21 commits)
  Use stable docs
  Version bump to 2.11.2 (issues #500, #533, #732, #731, #737, #733, #438, #722, #52, #725)
  Update project configuration template
  Use stable docs
  Implement firmware merging with base firmware for Nordic nRF51 development platform // Resolve #500 , Resolve #533
  Fix firmware uploading to Atmel SAMD21-XPRO board using ARM mbed framework // Resolve #732
  Add firmware merging process for nordicnrf51 // Issue #533, #500
  Add OpenOCD as an alternative upload method for atmelsam platform // Issue #732
  Sync flags parser with PlatformIO 3.0 branch // Resolve #738
  Update ``udev`` rules for the new STM32F407DISCOVERY boards // Resolve #731
  Add explanation about "Failed to find MSBuild toolsets directory"
  Add support for local "--echo" for Serial Port Monitor // Resolve #733
  Update history
  Improve support for Microchip PIC32 development platform and ChipKIT boards // Resolve #438
  Fix Project Generator for ESP8266 and ARM mbed based projects
  Switch to gcc-built LwIP library for espressif platform
  Push 2.11.2.dev2
  Fix linking process for microchippic32 platfrom // Issue #438
  Improve Project Generator for PlatformIO IDE (fixes incorrect linter errors)

.coveragerc

@@ -0,0 +1,21 @@
+# Copyright 2014-present PlatformIO <contact@platformio.org>
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#    http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+[report]
+# Regexes for lines to exclude from consideration
+exclude_lines =
+    pragma: no cover
+    def __repr__
+    raise AssertionError
+    raise NotImplementedError

.github/ISSUE_TEMPLATE.md

@@ -0,0 +1,56 @@
+What kind of issue is this?
+
+- [ ] Question. This issue tracker is not the place for questions. If you want to ask how to do
+      something, or to understand why something isn't working the way you expect it to, use
+      our Community Forums https://community.platformio.org
+
+- [ ] PlatformIO IDE. All issues related to PlatformIO IDE should be reported to appropriate repository
+      https://github.com/platformio/platformio-atom-ide/issues
+
+- [ ] Development Platform. All issues related to Development Platform should be reported to appropriate repository. Search it using link below
+      https://github.com/platformio?query=platform-
+
+- [ ] Feature Request. Start by telling us what problem you’re trying to solve. Often a solution
+      already exists! Don’t send pull requests to implement new features without first getting our
+      support. Sometimes we leave features out on purpose to keep the project small.
+
+- [ ] PlatformIO Core. If you’ve found a bug, please provide an information below.
+
+*You can erase any parts of this template not applicable to your Issue.*
+
+------------------------------------------------------------------
+
+### Configuration
+
+**Operating system**:
+
+**PlatformIO Version** (`platformio --version`):
+
+### Description of problem
+
+
+#### Steps to Reproduce
+
+1.
+2.
+3.
+
+### Actual Results
+
+
+### Expected Results
+
+
+### If problems with PlatformIO Build System:
+
+**The content of `platformio.ini`:**
+```ini
+Insert here...
+```
+
+**Source file to reproduce issue:**
+```cpp
+Insert here...
+```
+
+### Additional info

.gitignore

@@ -2,8 +2,10 @@
 *.pyc
 .pioenvs
 .tox
-.sconsign.dblite
-examples/ide-eclipse/.metadata
-examples/ide-eclipse/RemoteSystemsTempFiles
 docs/_build
 dist
+build
+.cache
+coverage.xml
+.coverage
+htmlcov

.gitmodules

@@ -1,6 +1,3 @@
-[submodule "examples/atmelavr-and-arduino/arduino-external-libs/lib/Adafruit-PCD8544-Nokia-5110-LCD-library"]
-	path = examples/atmelavr-and-arduino/arduino-external-libs/lib/Adafruit-PCD8544-Nokia-5110-LCD-library
-	url = https://github.com/adafruit/Adafruit-PCD8544-Nokia-5110-LCD-library.git
-[submodule "examples/atmelavr-and-arduino/arduino-external-libs/lib/Adafruit-GFX-Library"]
-	path = examples/atmelavr-and-arduino/arduino-external-libs/lib/Adafruit-GFX-Library
-	url = https://github.com/adafruit/Adafruit-GFX-Library.git
+[submodule "examples"]
+	path = examples
+	url = https://github.com/platformio/platformio-examples.git

.isort.cfg

@@ -1,3 +1,3 @@
 [settings]
 line_length=79
-known_third_party=click,requests,serial,SCons,pytest,bottle
+known_third_party=bottle,click,lockfile,pytest,requests,semantic_version,serial,SCons

.pylintrc

@@ -1,29 +1,9 @@
-[MASTER]
-
-# Specify a configuration file.
-#rcfile=
-
-# Python code to execute, usually for sys.path manipulation such as
-# pygtk.require().
-#init-hook=
-
-# Profiled execution.
-profile=no
-
-# Add files or directories to the blacklist. They should be base names, not
-# paths.
-ignore=CVS
-
-# Pickle collected data for later comparisons.
-persistent=yes
-
-# List of plugins (as comma separated values of python modules names) to load,
-# usually to register additional checkers.
-load-plugins=
-
-
 [MESSAGES CONTROL]
 
+# Only show warnings with the listed confidence levels. Leave empty to show
+# all. Valid levels: HIGH, INFERENCE, INFERENCE_FAILURE, UNDEFINED
+confidence=
+
 # Enable the message, report, category or checker with the given id(s). You can
 # either give multiple identifier separated by comma (,) or put this option
 # multiple time. See also the "--disable" option for examples.
@@ -38,244 +18,6 @@ load-plugins=
 # --enable=similarities". If you want to run only the classes checker, but have
 # no Warning level messages displayed, use"--disable=all --enable=classes
 # --disable=W"
-disable=C0103,C0111,E0611,F0401,I0011,R0801,R0903,R0922
+# disable=import-star-module-level,old-octal-literal,oct-method,print-statement,unpacking-in-except,parameter-unpacking,backtick,old-raise-syntax,old-ne-operator,long-suffix,dict-view-method,dict-iter-method,metaclass-assignment,next-method-called,raising-string,indexing-exception,raw_input-builtin,long-builtin,file-builtin,execfile-builtin,coerce-builtin,cmp-builtin,buffer-builtin,basestring-builtin,apply-builtin,filter-builtin-not-iterating,using-cmp-argument,useless-suppression,range-builtin-not-iterating,suppressed-message,no-absolute-import,old-division,cmp-method,reload-builtin,zip-builtin-not-iterating,intern-builtin,unichr-builtin,reduce-builtin,standarderror-builtin,unicode-builtin,xrange-builtin,coerce-method,delslice-method,getslice-method,setslice-method,input-builtin,round-builtin,hex-method,nonzero-method,map-builtin-not-iterating
 
-
-[REPORTS]
-
-# Set the output format. Available formats are text, parseable, colorized, msvs
-# (visual studio) and html. You can also give a reporter class, eg
-# mypackage.mymodule.MyReporterClass.
-output-format=text
-
-# Put messages in a separate file for each module / package specified on the
-# command line instead of printing them on stdout. Reports (if any) will be
-# written in a file name "pylint_global.[txt|html]".
-files-output=no
-
-# Tells whether to display a full report or only the messages
-reports=yes
-
-# Python expression which should return a note less than 10 (10 is the highest
-# note). You have access to the variables errors warning, statement which
-# respectively contain the number of errors / warnings messages and the total
-# number of statements analyzed. This is used by the global evaluation report
-# (RP0004).
-evaluation=10.0 - ((float(5 * error + warning + refactor + convention) / statement) * 10)
-
-# Add a comment according to your evaluation note. This is used by the global
-# evaluation report (RP0004).
-comment=no
-
-# Template used to display messages. This is a python new-style format string
-# used to format the message information. See doc for all details
-#msg-template=
-msg-template={path}:{line}: [{msg_id}({symbol}), {obj}] {msg}
-
-
-[BASIC]
-
-# Required attributes for module, separated by a comma
-required-attributes=
-
-# List of builtins function names that should not be used, separated by a comma
-bad-functions=map,filter,apply,input
-
-# Regular expression which should only match correct module names
-module-rgx=(([a-z_][a-z0-9_]*)|([A-Z][a-zA-Z0-9]+))$
-
-# Regular expression which should only match correct module level names
-const-rgx=(([A-Z_][A-Z0-9_]*)|(__.*__))$
-
-# Regular expression which should only match correct class names
-class-rgx=[A-Z_][a-zA-Z0-9]+$
-
-# Regular expression which should only match correct function names
-function-rgx=[a-z_][a-z0-9_]{2,30}$
-
-# Regular expression which should only match correct method names
-method-rgx=[a-z_][a-z0-9_]{2,30}$
-
-# Regular expression which should only match correct instance attribute names
-attr-rgx=[a-z_][a-z0-9_]{2,30}$
-
-# Regular expression which should only match correct argument names
-argument-rgx=[a-z_][a-z0-9_]{2,30}$
-
-# Regular expression which should only match correct variable names
-variable-rgx=[a-z_][a-z0-9_]{2,30}$
-
-# Regular expression which should only match correct attribute names in class
-# bodies
-class-attribute-rgx=([A-Za-z_][A-Za-z0-9_]{2,30}|(__.*__))$
-
-# Regular expression which should only match correct list comprehension /
-# generator expression variable names
-inlinevar-rgx=[A-Za-z_][A-Za-z0-9_]*$
-
-# Good variable names which should always be accepted, separated by a comma
-good-names=i,j,k,ex,Run,_
-
-# Bad variable names which should always be refused, separated by a comma
-bad-names=foo,bar,baz,toto,tutu,tata
-
-# Regular expression which should only match function or class names that do
-# not require a docstring.
-no-docstring-rgx=__.*__
-
-# Minimum line length for functions/classes that require docstrings, shorter
-# ones are exempt.
-docstring-min-length=-1
-
-
-[FORMAT]
-
-# Maximum number of characters on a single line.
-max-line-length=80
-
-# Regexp for a line that is allowed to be longer than the limit.
-ignore-long-lines=^\s*(# )?<?https?://\S+>?$
-
-# Allow the body of an if to be on the same line as the test if there is no
-# else.
-single-line-if-stmt=no
-
-# List of optional constructs for which whitespace checking is disabled
-no-space-check=trailing-comma,dict-separator
-
-# Maximum number of lines in a module
-max-module-lines=1000
-
-# String used as indentation unit. This is usually " " (4 spaces) or "\t" (1
-# tab).
-indent-string='    '
-
-
-[MISCELLANEOUS]
-
-# List of note tags to take in consideration, separated by a comma.
-notes=FIXME,XXX,TODO
-
-
-[SIMILARITIES]
-
-# Minimum lines number of a similarity.
-min-similarity-lines=4
-
-# Ignore comments when computing similarities.
-ignore-comments=yes
-
-# Ignore docstrings when computing similarities.
-ignore-docstrings=yes
-
-# Ignore imports when computing similarities.
-ignore-imports=no
-
-
-[TYPECHECK]
-
-# Tells whether missing members accessed in mixin class should be ignored. A
-# mixin class is detected if its name ends with "mixin" (case insensitive).
-ignore-mixin-members=yes
-
-# List of classes names for which member attributes should not be checked
-# (useful for classes with attributes dynamically set).
-ignored-classes=SQLObject
-
-# When zope mode is activated, add a predefined set of Zope acquired attributes
-# to generated-members.
-zope=no
-
-# List of members which are set dynamically and missed by pylint inference
-# system, and so shouldn't trigger E0201 when accessed. Python regular
-# expressions are accepted.
-generated-members=REQUEST,acl_users,aq_parent
-
-
-[VARIABLES]
-
-# Tells whether we should check for unused import in __init__ files.
-init-import=no
-
-# A regular expression matching the beginning of the name of dummy variables
-# (i.e. not used).
-dummy-variables-rgx=_$|dummy
-
-# List of additional names supposed to be defined in builtins. Remember that
-# you should avoid to define new builtins when possible.
-additional-builtins=
-
-
-[CLASSES]
-
-# List of interface methods to ignore, separated by a comma. This is used for
-# instance to not check methods defines in Zope's Interface base class.
-ignore-iface-methods=isImplementedBy,deferred,extends,names,namesAndDescriptions,queryDescriptionFor,getBases,getDescriptionFor,getDoc,getName,getTaggedValue,getTaggedValueTags,isEqualOrExtendedBy,setTaggedValue,isImplementedByInstancesOf,adaptWith,is_implemented_by
-
-# List of method names used to declare (i.e. assign) instance attributes.
-defining-attr-methods=__init__,__new__,setUp
-
-# List of valid names for the first argument in a class method.
-valid-classmethod-first-arg=cls
-
-# List of valid names for the first argument in a metaclass class method.
-valid-metaclass-classmethod-first-arg=mcs
-
-
-[DESIGN]
-
-# Maximum number of arguments for function / method
-max-args=5
-
-# Argument names that match this expression will be ignored. Default to name
-# with leading underscore
-ignored-argument-names=_.*
-
-# Maximum number of locals for function / method body
-max-locals=15
-
-# Maximum number of return / yield for function / method body
-max-returns=6
-
-# Maximum number of branch for function / method body
-max-branches=12
-
-# Maximum number of statements in function / method body
-max-statements=50
-
-# Maximum number of parents for a class (see R0901).
-max-parents=7
-
-# Maximum number of attributes for a class (see R0902).
-max-attributes=7
-
-# Minimum number of public methods for a class (see R0903).
-min-public-methods=2
-
-# Maximum number of public methods for a class (see R0904).
-max-public-methods=20
-
-
-[IMPORTS]
-
-# Deprecated modules which should not be used, separated by a comma
-deprecated-modules=regsub,TERMIOS,Bastion,rexec
-
-# Create a graph of every (i.e. internal and external) dependencies in the
-# given file (report RP0402 must not be disabled)
-import-graph=
-
-# Create a graph of external dependencies in the given file (report RP0402 must
-# not be disabled)
-ext-import-graph=
-
-# Create a graph of internal dependencies in the given file (report RP0402 must
-# not be disabled)
-int-import-graph=
-
-
-[EXCEPTIONS]
-
-# Exceptions that will emit a warning when being caught. Defaults to
-# "Exception"
-overgeneral-exceptions=Exception
+disable=locally-disabled,missing-docstring,invalid-name,too-few-public-methods,redefined-variable-type,import-error,similarities,unsupported-membership-test,unsubscriptable-object,ungrouped-imports,cyclic-import

.style.yapf

@@ -0,0 +1,3 @@
+[style]
+blank_line_before_nested_class_or_def = true
+allow_multiline_lambdas = true

.travis.yml

@@ -1,15 +1,42 @@
 language: python
-python:
-    - "2.7"
 
-env:
-    - TOX_ENV=docs
-    - TOX_ENV=lint
-    - TOX_ENV=py26
-    - TOX_ENV=py27
+matrix:
+  include:
+    - os: linux
+      sudo: false
+      python: 2.7
+      env: TOX_ENV=docs
+    - os: linux
+      sudo: false
+      python: 2.7
+      env: TOX_ENV=lint
+    - os: linux
+      sudo: required
+      python: 2.7
+      env: TOX_ENV=py27
+    - os: osx
+      language: generic
+      env: TOX_ENV=py27
 
 install:
-    - pip install tox
+  - git submodule update --init --recursive
+  - if [[ "$TRAVIS_OS_NAME" == "osx" ]]; then sudo pip install -U tox; else pip install -U tox; fi
+
+  # temporary hook to fix issue with gcc-pic32
+  - if [[ "$TOX_ENV" == "py27" ]] && [[ "$TRAVIS_OS_NAME" == "linux" ]]; then sudo apt-get install -qq lib32z1 lib32ncurses5 lib32bz2-1.0; fi
 
 script:
-    - tox -e $TOX_ENV
+  - tox -e $TOX_ENV
+
+after_success:
+  - if [[ "$TOX_ENV" == "py27" ]] && [[ "$TRAVIS_OS_NAME" == "linux" ]]; then tox -e coverage; fi
+  - if [[ "$TOX_ENV" == "py27" ]] && [[ "$TRAVIS_OS_NAME" == "linux" ]]; then bash <(curl -s https://codecov.io/bash); fi
+
+notifications:
+  email: false
+
+  slack:
+    rooms:
+      secure: JD6VGfN4+SLU2CwDdiIOr1VgwD+zbYUCE/srwyGuHavnjIkPItkl6T6Bn8Y4VrU6ysbuKotfdV2TAJJ82ivFbY8BvZBc7FBcYp/AGQ4FaCCV5ySv8RDAcQgdE12oaGzMdODiLqsB85f65zOlAFa+htaXyEiRTcotn6Y2hupatrI=
+    on_failure: always
+    on_success: change

CONTRIBUTING.md

@@ -0,0 +1,21 @@
+Contributing
+------------
+
+To get started, <a href="https://www.clahub.com/agreements/platformio/platformio">sign the Contributor License Agreement</a>.
+
+1. Fork the repository on GitHub.
+2. Make a branch off of ``develop``
+3. Run ``pip install tox``
+4. Go to the root of project where is located ``tox.ini`` and run ``tox -e develop``
+5. Activate current development environment:
+
+   * Windows: ``.tox\develop\Scripts\activate``
+   * Bash/ZSH: ``source .tox/develop/bin/activate``
+   * Fish: ``source .tox/bin/activate.fish``
+
+6. Make changes to code, documentation, etc.
+7. Lint source code ``tox -e lint``
+8. Run the tests ``tox -e py27``
+9. Build documentation ``tox -e docs`` (creates a directory _build under docs where you can find the html)
+10. Commit changes to your forked repository
+11. Submit a Pull Request on GitHub.

LICENSE

@@ -1,21 +1,174 @@
-The MIT License (MIT)
+Apache License
+Version 2.0, January 2004
+http://www.apache.org/licenses/
 
-Copyright (c) 2014-2015 Ivan Kravets
+TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION
 
-Permission is hereby granted, free of charge, to any person obtaining a copy
-of this software and associated documentation files (the "Software"), to deal
-in the Software without restriction, including without limitation the rights
-to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-copies of the Software, and to permit persons to whom the Software is
-furnished to do so, subject to the following conditions:
+1. Definitions.
 
-The above copyright notice and this permission notice shall be included in all
-copies or substantial portions of the Software.
+"License" shall mean the terms and conditions for use, reproduction,
+and distribution as defined by Sections 1 through 9 of this document.
 
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
-SOFTWARE.
+"Licensor" shall mean the copyright owner or entity authorized by
+the copyright owner that is granting the License.
+
+"Legal Entity" shall mean the union of the acting entity and all
+other entities that control, are controlled by, or are under common
+control with that entity. For the purposes of this definition,
+"control" means (i) the power, direct or indirect, to cause the
+direction or management of such entity, whether by contract or
+otherwise, or (ii) ownership of fifty percent (50%) or more of the
+outstanding shares, or (iii) beneficial ownership of such entity.
+
+"You" (or "Your") shall mean an individual or Legal Entity
+exercising permissions granted by this License.
+
+"Source" form shall mean the preferred form for making modifications,
+including but not limited to software source code, documentation
+source, and configuration files.
+
+"Object" form shall mean any form resulting from mechanical
+transformation or translation of a Source form, including but
+not limited to compiled object code, generated documentation,
+and conversions to other media types.
+
+"Work" shall mean the work of authorship, whether in Source or
+Object form, made available under the License, as indicated by a
+copyright notice that is included in or attached to the work
+(an example is provided in the Appendix below).
+
+"Derivative Works" shall mean any work, whether in Source or Object
+form, that is based on (or derived from) the Work and for which the
+editorial revisions, annotations, elaborations, or other modifications
+represent, as a whole, an original work of authorship. For the purposes
+of this License, Derivative Works shall not include works that remain
+separable from, or merely link (or bind by name) to the interfaces of,
+the Work and Derivative Works thereof.
+
+"Contribution" shall mean any work of authorship, including
+the original version of the Work and any modifications or additions
+to that Work or Derivative Works thereof, that is intentionally
+submitted to Licensor for inclusion in the Work by the copyright owner
+or by an individual or Legal Entity authorized to submit on behalf of
+the copyright owner. For the purposes of this definition, "submitted"
+means any form of electronic, verbal, or written communication sent
+to the Licensor or its representatives, including but not limited to
+communication on electronic mailing lists, source code control systems,
+and issue tracking systems that are managed by, or on behalf of, the
+Licensor for the purpose of discussing and improving the Work, but
+excluding communication that is conspicuously marked or otherwise
+designated in writing by the copyright owner as "Not a Contribution."
+
+"Contributor" shall mean Licensor and any individual or Legal Entity
+on behalf of whom a Contribution has been received by Licensor and
+subsequently incorporated within the Work.
+
+2. Grant of Copyright License. Subject to the terms and conditions of
+this License, each Contributor hereby grants to You a perpetual,
+worldwide, non-exclusive, no-charge, royalty-free, irrevocable
+copyright license to reproduce, prepare Derivative Works of,
+publicly display, publicly perform, sublicense, and distribute the
+Work and such Derivative Works in Source or Object form.
+
+3. Grant of Patent License. Subject to the terms and conditions of
+this License, each Contributor hereby grants to You a perpetual,
+worldwide, non-exclusive, no-charge, royalty-free, irrevocable
+(except as stated in this section) patent license to make, have made,
+use, offer to sell, sell, import, and otherwise transfer the Work,
+where such license applies only to those patent claims licensable
+by such Contributor that are necessarily infringed by their
+Contribution(s) alone or by combination of their Contribution(s)
+with the Work to which such Contribution(s) was submitted. If You
+institute patent litigation against any entity (including a
+cross-claim or counterclaim in a lawsuit) alleging that the Work
+or a Contribution incorporated within the Work constitutes direct
+or contributory patent infringement, then any patent licenses
+granted to You under this License for that Work shall terminate
+as of the date such litigation is filed.
+
+4. Redistribution. You may reproduce and distribute copies of the
+Work or Derivative Works thereof in any medium, with or without
+modifications, and in Source or Object form, provided that You
+meet the following conditions:
+
+(a) You must give any other recipients of the Work or
+  Derivative Works a copy of this License; and
+
+(b) You must cause any modified files to carry prominent notices
+  stating that You changed the files; and
+
+(c) You must retain, in the Source form of any Derivative Works
+  that You distribute, all copyright, patent, trademark, and
+  attribution notices from the Source form of the Work,
+  excluding those notices that do not pertain to any part of
+  the Derivative Works; and
+
+(d) If the Work includes a "NOTICE" text file as part of its
+  distribution, then any Derivative Works that You distribute must
+  include a readable copy of the attribution notices contained
+  within such NOTICE file, excluding those notices that do not
+  pertain to any part of the Derivative Works, in at least one
+  of the following places: within a NOTICE text file distributed
+  as part of the Derivative Works; within the Source form or
+  documentation, if provided along with the Derivative Works; or,
+  within a display generated by the Derivative Works, if and
+  wherever such third-party notices normally appear. The contents
+  of the NOTICE file are for informational purposes only and
+  do not modify the License. You may add Your own attribution
+  notices within Derivative Works that You distribute, alongside
+  or as an addendum to the NOTICE text from the Work, provided
+  that such additional attribution notices cannot be construed
+  as modifying the License.
+
+You may add Your own copyright statement to Your modifications and
+may provide additional or different license terms and conditions
+for use, reproduction, or distribution of Your modifications, or
+for any such Derivative Works as a whole, provided Your use,
+reproduction, and distribution of the Work otherwise complies with
+the conditions stated in this License.
+
+5. Submission of Contributions. Unless You explicitly state otherwise,
+any Contribution intentionally submitted for inclusion in the Work
+by You to the Licensor shall be under the terms and conditions of
+this License, without any additional terms or conditions.
+Notwithstanding the above, nothing herein shall supersede or modify
+the terms of any separate license agreement you may have executed
+with Licensor regarding such Contributions.
+
+6. Trademarks. This License does not grant permission to use the trade
+names, trademarks, service marks, or product names of the Licensor,
+except as required for reasonable and customary use in describing the
+origin of the Work and reproducing the content of the NOTICE file.
+
+7. Disclaimer of Warranty. Unless required by applicable law or
+agreed to in writing, Licensor provides the Work (and each
+Contributor provides its Contributions) on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
+implied, including, without limitation, any warranties or conditions
+of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A
+PARTICULAR PURPOSE. You are solely responsible for determining the
+appropriateness of using or redistributing the Work and assume any
+risks associated with Your exercise of permissions under this License.
+
+8. Limitation of Liability. In no event and under no legal theory,
+whether in tort (including negligence), contract, or otherwise,
+unless required by applicable law (such as deliberate and grossly
+negligent acts) or agreed to in writing, shall any Contributor be
+liable to You for damages, including any direct, indirect, special,
+incidental, or consequential damages of any character arising as a
+result of this License or out of the use or inability to use the
+Work (including but not limited to damages for loss of goodwill,
+work stoppage, computer failure or malfunction, or any and all
+other commercial damages or losses), even if such Contributor
+has been advised of the possibility of such damages.
+
+9. Accepting Warranty or Additional Liability. While redistributing
+the Work or Derivative Works thereof, You may choose to offer,
+and charge a fee for, acceptance of support, warranty, indemnity,
+or other liability obligations and/or rights consistent with this
+License. However, in accepting such obligations, You may act only
+on Your own behalf and on Your sole responsibility, not on behalf
+of any other Contributor, and only if You agree to indemnify,
+defend, and hold each Contributor harmless for any liability
+incurred by, or claims asserted against, such Contributor by reason
+of your accepting any such warranty or additional liability.

Makefile

@@ -0,0 +1,23 @@
+
+lint:
+	pylint --rcfile=./.pylintrc ./platformio
+
+isort:
+	isort -rc ./platformio
+	isort -rc ./tests
+
+yapf:
+	yapf --recursive --in-place platformio/
+
+before-commit: isort yapf lint
+
+clean-docs:
+	rm -rf docs/_build
+
+clean: clean-docs
+	find . -name \*.pyc -delete
+	find . -name __pycache__ -delete
+	rm -rf .cache
+	rm -rf build
+	rm -rf htmlcov
+	rm -f .coverage

README.rst

@@ -7,67 +7,87 @@ PlatformIO
 .. image:: https://ci.appveyor.com/api/projects/status/dku0h2rutfj0ctls/branch/develop?svg=true
     :target: https://ci.appveyor.com/project/ivankravets/platformio
     :alt: AppVeyor.CI Build Status
-.. image:: https://circleci.com/gh/platformio/platformio/tree/develop.svg?style=svg
-    :target: https://circleci.com/gh/platformio/platformio/tree/develop
-    :alt: Circle.CI Build Status
-.. image:: https://gemnasium.com/platformio/platformio.png
-    :target: https://gemnasium.com/platformio/platformio
-    :alt: Dependency Status
+.. image:: https://codecov.io/gh/platformio/platformio/branch/develop/graph/badge.svg
+  :target: https://codecov.io/gh/platformio/platformio
+.. image:: https://requires.io/github/platformio/platformio/requirements.svg?branch=develop
+    :target: https://requires.io/github/platformio/platformio/requirements/?branch=develop
+    :alt: Requirements Status
 .. image:: https://img.shields.io/pypi/v/platformio.svg
     :target: https://pypi.python.org/pypi/platformio/
     :alt: Latest Version
-.. image:: https://img.shields.io/pypi/dm/platformio.svg
-    :target: https://pypi.python.org/pypi/platformio/
-    :alt: Downloads
 .. image:: https://img.shields.io/pypi/l/platformio.svg
     :target: https://pypi.python.org/pypi/platformio/
     :alt:  License
-.. image:: https://badges.gitter.im/Join%20Chat.svg
-   :alt: Join the chat at https://gitter.im/platformio/platformio
-   :target: https://gitter.im/platformio/platformio
-.. image:: https://www.openhub.net/p/platformio/widgets/project_thin_badge.gif
-   :target: https://www.openhub.net/p/platformio
+.. image:: https://img.shields.io/PlatformIO/Community.png
+   :alt: Community Forums
+   :target: https://community.platformio.org
+.. image:: https://img.shields.io/PlatformIO/Plus.png?color=orange
+   :alt: PlatformIO Plus: Professional solutions for an awesome open source PlatformIO ecosystem
+   :target: https://pioplus.com
 
-`Website + Library Search <http://platformio.org>`_ |
-`Documentation <http://docs.platformio.org>`_ |
-`Project Examples <https://github.com/platformio/platformio/tree/develop/examples>`_ |
-`Blog <http://www.ikravets.com/category/computer-life/platformio>`_ |
-`Reddit <http://www.reddit.com/r/platformio/>`_ |
-`Twitter <https://twitter.com/PlatformIO_Org>`_
+**Quick Links:** `Home Page <http://platformio.org>`_ |
+`PlatformIO Plus <https://pioplus.com>`_ |
+`PlatformIO IDE <http://platformio.org/platformio-ide>`_ |
+`Project Examples <https://github.com/platformio/platformio-examples/tree/develop>`_ |
+`Docs <http://docs.platformio.org>`_ |
+`Donate <http://platformio.org/donate>`_ |
+`Contact Us <http://platformio.org/contact>`_
+
+**Social:** `Twitter <https://twitter.com/PlatformIO_Org>`_ |
+`Facebook <https://www.facebook.com/platformio>`_ |
+`Hackaday <https://hackaday.io/project/7980-platformio>`_ |
+`Bintray <https://bintray.com/platformio>`_ |
+`Community <https://community.platformio.org>`_ |
 
 .. image:: https://raw.githubusercontent.com/platformio/platformio/develop/docs/_static/platformio-logo.png
     :target: http://platformio.org
 
-`PlatformIO <http://platformio.org>`_ is a cross-platform code builder
-and the missing library manager (Ready for embedded development, IDE and
-Continuous integration, Arduino and MBED compatible).
+`PlatformIO <http://platformio.org>`_ is an open source ecosystem for IoT
+development. Cross-platform build system and library manager. Continuous and
+IDE integration. Arduino, ESP8266 and ARM mbed compatible
 
-*Atmel AVR & SAM, Espressif, Freescale Kinetis, Nordic nRF51, NXP LPC,
-Silicon Labs EFM32, ST STM32, TI MSP430 & Tiva, Teensy, Arduino, mbed,
-libOpenCM3, etc.*
+* **PlatformIO IDE** - The next-generation integrated development environment for IoT.
+  C/C++ Intelligent Code Completion and Smart Code Linter for the super-fast coding.
+  Multi-projects workflow with Multiple Panes. Themes Support with dark and light colors.
+  Built-in Terminal with PlatformIO CLI tool and support for the powerful Serial Port Monitor.
+  All advanced instruments without leaving your favourite development environment.
+* **Development Platforms** - Embedded and Desktop development platforms with
+  pre-built toolchains, debuggers, uploaders and frameworks which work under
+  popular host OS: Mac, Windows, Linux (+ARM)
+* **Embedded Boards** - Rapid Embedded Programming, IDE and Continuous
+  Integration in a few steps with PlatformIO thanks to built-in project
+  generator for the most popular embedded boards and IDE
+* **Library Manager** - Hundreds Popular Libraries are organized into single
+  Web 2.0 platform: list by categories, keywords, authors, compatible
+  platforms and frameworks; learn via examples; be up-to-date with the latest
+  version.
 
-* `Get Started <http://platformio.org/#!/get-started>`_
-* `Web 2.0 Library Search <http://platformio.org/#!/lib>`_
-* `Development Platforms <http://platformio.org/#!/platforms>`_
-* `Frameworks <http://platformio.org/#!/frameworks>`_
-* `Embedded Boards Explorer <http://platformio.org/#!/boards>`_
-* `Library Manager <http://docs.platformio.org/en/latest/librarymanager/index.html>`_
-* `User Guide <http://docs.platformio.org/en/latest/userguide/index.html>`_
-* `Continuous Integration <http://docs.platformio.org/en/latest/ci/index.html>`_
-* `IDE Integration <http://docs.platformio.org/en/latest/ide.html>`_
-* `Articles about us <http://docs.platformio.org/en/latest/articles.html>`_
-* `FAQ <http://docs.platformio.org/en/latest/faq.html>`_
-* `Release History <http://docs.platformio.org/en/latest/history.html>`_
+*Atmel AVR & SAM, Espressif, Freescale Kinetis, Intel ARC32, Lattice iCE40,
+Microchip PIC32, Nordic nRF51, NXP LPC, Silicon Labs EFM32, ST STM32,
+TI MSP430 & Tiva, Teensy, Arduino, mbed, libOpenCM3, etc.*
 
-You have **no need** to install any *IDE* or compile any tool chains. *PlatformIO*
-has pre-built different development platforms and pre-configured settings for
-the most popular embedded boards. For further details, please
-refer to `What is PlatformIO? <http://docs.platformio.org/en/latest/faq.html#what-is-platformio>`_
+.. image:: https://raw.githubusercontent.com/platformio/platformio/develop/docs/_static/platformio-demo-wiring.gif
+    :target: http://platformio.org
+
+* `PlatformIO Plus and professional solutions <https://pioplus.com>`_
+* `PlatformIO IDE <http://platformio.org/platformio-ide>`_
+* `Get Started <http://platformio.org/get-started>`_
+* `Library Search and Registry <http://platformio.org/lib>`_
+* `Development Platforms <http://platformio.org/platforms>`_
+* `Frameworks <http://platformio.org/frameworks>`_
+* `Embedded Boards Explorer <http://platformio.org/boards>`_
+* `Library Manager <http://docs.platformio.org/en/stable/librarymanager/index.html>`_
+* `User Guide <http://docs.platformio.org/en/stable/userguide/index.html>`_
+* `Continuous Integration <http://docs.platformio.org/en/stable/ci/index.html>`_
+* `IDE Integration <http://docs.platformio.org/en/stable/ide.html>`_
+* `Articles about us <http://docs.platformio.org/en/stable/articles.html>`_
+* `FAQ <http://docs.platformio.org/en/stable/faq.html>`_
+* `Release Notes <http://docs.platformio.org/en/stable/history.html>`_
 
 Use whenever. *Run everywhere.*
 -------------------------------
 *PlatformIO* is written in pure *Python* and **doesn't depend** on any
-additional libraries/tools from an operation system. It allows you to use
+additional libraries/tools from an operating system. It allows you to use
 *PlatformIO* beginning from *PC (Mac, Linux, Win)* and ending with credit-card
 sized computers (`Raspberry Pi <http://www.raspberrypi.org>`_,
 `BeagleBone <http://beagleboard.org>`_,
@@ -76,17 +96,17 @@ sized computers (`Raspberry Pi <http://www.raspberrypi.org>`_,
 Embedded Development. *Easier Than Ever.*
 -----------------------------------------
 *PlatformIO* is well suited for embedded development and has pre-configured
-settings for most popular `Embedded Boards <http://platformio.org/#!/boards>`_.
+settings for most popular `Embedded Boards <http://platformio.org/boards>`_.
 
 * Colourful `command-line output <https://raw.githubusercontent.com/platformio/platformio/develop/examples/platformio-examples.png>`_
-* `IDE Integration <http://docs.platformio.org/en/latest/ide.html>`_ with
-  *Arduino, Eclipse, Energia, Qt Creator, Sublime Text, Vim, Visual Studio*
-* `Continuous Integration <http://docs.platformio.org/en/latest/ci/index.html>`_
+* `IDE Integration <http://docs.platformio.org/en/stable/ide.html>`_ with
+  *Arduino, Atom, Eclipse, Emacs, Energia, Qt Creator, Sublime Text, Vim, Visual Studio*
+* Cloud compiling and `Continuous Integration <http://docs.platformio.org/en/stable/ci/index.html>`_
   with *AppVeyor, Circle CI, Drone, Shippable, Travis CI*
-* Built-in `Serial Port Monitor <http://docs.platformio.org/en/latest/userguide/cmd_serialports.html#platformio-serialports-monitor>`_ and configurable
-  `build -flags/-options <http://docs.platformio.org/en/latest/projectconf.html#build-flags>`_
+* Built-in `Serial Port Monitor <http://docs.platformio.org/en/stable/userguide/cmd_serialports.html#platformio-serialports-monitor>`_ and configurable
+  `build -flags/-options <http://docs.platformio.org/en/stable/projectconf.html#build-flags>`_
 * Automatic **firmware uploading**
-* Pre-built tool chains, frameworks for the popular `Hardware Platforms <http://platformio.org/#!/platforms>`_
+* Pre-built tool chains, frameworks for the popular `Hardware Platforms <http://platformio.org/platforms>`_
 
 .. image:: https://raw.githubusercontent.com/platformio/platformio-web/develop/app/images/platformio-embedded-development.png
     :target: http://platformio.org
@@ -97,10 +117,10 @@ The Missing Library Manager. *It's here!*
 *PlatformIO Library Manager* is the missing library manager for development
 platforms which allows you to organize and have up-to-date external libraries.
 
-* Friendly `Command-Line Interface <http://docs.platformio.org/en/latest/librarymanager/index.html>`_
-* Modern `Web 2.0 Library Search <http://platformio.org/#!/lib>`_
+* Friendly `Command-Line Interface <http://docs.platformio.org/en/stable/librarymanager/index.html>`_
+* Modern `Web 2.0 Library Search <http://platformio.org/lib>`_
 * Open Source `Library Registry API <https://github.com/platformio/platformio-api>`_
-* Library Crawler based on `library.json <http://docs.platformio.org/en/latest/librarymanager/config.html>`_
+* Library Crawler based on `library.json <http://docs.platformio.org/en/stable/librarymanager/config.html>`_
   specification
 * Library **dependency management**
 * Automatic library updating
@@ -109,7 +129,7 @@ platforms which allows you to organize and have up-to-date external libraries.
     :target: http://platformio.org
     :alt:  PlatformIO Library Manager Architecture
 
-Smart Code Builder. *Fast and Reliable.*
+Smart Build System. *Fast and Reliable.*
 ----------------------------------------
 *PlatformIO Code Builder* is built-on a next-generation software construction
 tool named `SCons <http://www.scons.org/>`_. Think of *SCons* as an improved,
@@ -119,50 +139,62 @@ cross-platform substitute for the classic *Make* utility.
 * Reliable detection of *build changes*
 * Improved support for *parallel builds*
 * Ability to share *built files in a cache*
-* Lookup for external libraries which are installed via `Library Manager <http://docs.platformio.org/en/latest/librarymanager/index.html>`_
+* Lookup for external libraries which are installed via `Library Manager <http://docs.platformio.org/en/stable/librarymanager/index.html>`_
 
 .. image:: https://raw.githubusercontent.com/platformio/platformio-web/develop/app/images/platformio-scons-builder.png
     :target: http://platformio.org
-    :alt:  PlatformIO Code Builder Architecture
+    :alt:  PlatformIO Build System Architecture
 
 Single source code. *Multiple platforms.*
 -----------------------------------------
-*PlatformIO* allows developer to compile the same code with different
-development platforms using the *Only One Command*
-`platformio run <http://docs.platformio.org/en/latest/userguide/cmd_run.html>`_.
+*PlatformIO* allows the developer to compile the same code with different
+development platforms using only *One Command*
+`platformio run <http://docs.platformio.org/en/stable/userguide/cmd_run.html>`_.
 This happens due to
-`Project Configuration File (platformio.ini) <http://docs.platformio.org/en/latest/projectconf.html>`_
+`Project Configuration File (platformio.ini) <http://docs.platformio.org/en/stable/projectconf.html>`_
 where you can setup different environments with specific options (platform
 type, firmware uploading settings, pre-built framework, build flags and many
 more).
 
 It has support for the most popular embedded platforms:
 
-* `Atmel AVR <http://platformio.org/#!/platforms/atmelavr>`_
-* `Atmel SAM <http://platformio.org/#!/platforms/atmelsam>`_
-* `Espressif <http://platformio.org/#!/platforms/espressif>`_
-* `Freescale Kinetis <http://platformio.org/#!/platforms/freescalekinetis>`_
-* `Nordic nRF51 <http://platformio.org/#!/platforms/nordicnrf51>`_
-* `NXP LPC <http://platformio.org/#!/platforms/nxplpc>`_
-* `ST STM32 <http://platformio.org/#!/platforms/ststm32>`_
-* `Silicon Labs EFM32 <http://platformio.org/#!/platforms/siliconlabsefm32>`_
-* `Teensy <http://platformio.org/#!/platforms/teensy>`_
-* `TI MSP430 <http://platformio.org/#!/platforms/timsp430>`_
-* `TI TIVA C <http://platformio.org/#!/platforms/titiva>`_
+* `Atmel AVR <http://platformio.org/platforms/atmelavr>`_
+* `Atmel SAM <http://platformio.org/platforms/atmelsam>`_
+* `Espressif <http://platformio.org/platforms/espressif>`_
+* `Freescale Kinetis <http://platformio.org/platforms/freescalekinetis>`_
+* `Intel ARC32 <http://platformio.org/platforms/intel_arc32>`_
+* `Lattice iCE40 <http://platformio.org/platforms/lattice_ice40>`_
+* `Microchip PIC32 <http://platformio.org/platforms/microchippic32>`_
+* `Nordic nRF51 <http://platformio.org/platforms/nordicnrf51>`_
+* `NXP LPC <http://platformio.org/platforms/nxplpc>`_
+* `ST STM32 <http://platformio.org/platforms/ststm32>`_
+* `Silicon Labs EFM32 <http://platformio.org/platforms/siliconlabsefm32>`_
+* `Teensy <http://platformio.org/platforms/teensy>`_
+* `TI MSP430 <http://platformio.org/platforms/timsp430>`_
+* `TI TIVA C <http://platformio.org/platforms/titiva>`_
 
 Frameworks:
 
-* `Arduino <http://platformio.org/#!/frameworks/arduino>`_
-* `CMSIS <http://platformio.org/#!/frameworks/cmsis>`_
-* `libOpenCM3 <http://platformio.org/#!/frameworks/libopencm3>`_
-* `Energia <http://platformio.org/#!/frameworks/energia>`_
-* `SPL <http://platformio.org/#!/frameworks/spl>`_
-* `mbed <http://platformio.org/#!/frameworks/mbed>`_
+* `Arduino <http://platformio.org/frameworks/arduino>`_
+* `CMSIS <http://platformio.org/frameworks/cmsis>`_
+* `Energia <http://platformio.org/frameworks/energia>`_
+* `libOpenCM3 <http://platformio.org/frameworks/libopencm3>`_
+* `mbed <http://platformio.org/frameworks/mbed>`_
+* `Simba <http://platformio.org/frameworks/simba>`_
+* `SPL <http://platformio.org/frameworks/spl>`_
+* `WiringPi <http://platformio.org/frameworks/wiringpi>`_
 
+For further details, please refer to `What is PlatformIO? <http://docs.platformio.org/en/stable/faq.html#what-is-platformio>`_
 
-Licence
+Contributing
+------------
+
+See `contributing guidelines <https://github.com/platformio/platformio/blob/develop/CONTRIBUTING.md>`_.
+
+License
 -------
 
-Copyright (C) 2014-2015 Ivan Kravets
+Copyright 2014-present PlatformIO <contact@platformio.org>
 
-Licenced under the MIT Licence.
+The PlatformIO is licensed under the permissive Apache 2.0 license,
+so you can use it in both commercial and personal projects with confidence.

appveyor.yml

@@ -1,21 +1,21 @@
 build: off
 environment:
-  global:
-    WITH_COMPILER: "cmd /E:ON /V:ON /C .\\scripts\\appveyor\\run_with_compiler.cmd"
+
   matrix:
     - TOXENV: "py27"
-      TOXPYTHON: "C:\\Python27-x64\\python.exe"
-      WINDOWS_SDK_VERSION: "v7.0"
-      PYTHON_HOME: "C:\\Python27-x64"
-      PYTHON_VERSION: "2.7"
-      PYTHON_ARCH: "64"
-init:
-  - "ECHO %TOXENV%"
-  - ps: "ls C:\\Python*"
+
 install:
-  - "git submodule update --init --recursive"
-  - "powershell scripts\\appveyor\\install.ps1"
+  - cmd: git submodule update --init --recursive
+  - cmd: SET PATH=%PATH%;C:\Python27\Scripts;C:\MinGW\bin
+  - cmd: pip install tox
+
 test_script:
-  - "%PYTHON_HOME%\\Scripts\\tox --version"
-  - "%PYTHON_HOME%\\Scripts\\pip --version"
-  - "%WITH_COMPILER% %PYTHON_HOME%\\Scripts\\tox"
+  - cmd: tox
+
+notifications:
+  - provider: Slack
+    incoming_webhook:
+      secure: E9H0SU0Ju7WLDvgxsV8cs3J62T3nTTX7QkEjsczN0Sto/c9hWkVfhc5gGWUkxhlD975cokHByKGJIdwYwCewqOI+7BrcT8U+nlga4Uau7J8=
+    on_build_success: false
+    on_build_failure: true
+    on_build_status_changed: true

circle.yml

@@ -1,20 +0,0 @@
-machine:
-    python:
-        version: 2.7
-    environment:
-        TOX_ENV: docs
-        TOX_ENV: lint
-        TOX_ENV: py26
-        TOX_ENV: py27
-
-checkout:
-    post:
-        - git submodule update --init
-
-dependencies:
-    pre:
-        - pip install tox
-
-test:
-    override:
-        - tox -e $TOX_ENV

docs/_static/extra.css

@@ -0,0 +1,330 @@
+/**
+ * Copyright 2014-present PlatformIO <contact@platformio.org>
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *    http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+header,
+nav {
+  display: block;
+}
+
+#pionav {
+  display: none;
+}
+
+.container {
+  padding-right: 15px;
+  padding-left: 15px;
+  margin-right: auto;
+  margin-left: auto;
+}
+
+@media (min-width: 992px) {
+  #pionav {
+    display: block !important;
+  }
+  body {
+    padding-top: 50px;
+  }
+  .wy-nav-side {
+    top: 50px;
+  }
+
+  .container {
+    width: 970px;
+  }
+}
+@media (min-width: 1200px) {
+  .container {
+    width: 1150px;
+  }
+}
+.container-fluid {
+  padding-right: 15px;
+  padding-left: 15px;
+  margin-right: auto;
+  margin-left: auto;
+}
+
+.container:before,
+.container:after,
+.container-fluid:before,
+.container-fluid:after,
+.nav:before,
+.nav:after,
+.navbar:before,
+.navbar:after,
+.navbar-header:before,
+.navbar-header:after {
+  display: table;
+  content: " ";
+}
+.container:after,
+.container-fluid:after,
+.nav:after,
+.navbar:after,
+.navbar-header:after {
+  clear: both;
+}
+
+.nav {
+  padding-left: 0;
+  margin-bottom: 0;
+  list-style: none;
+}
+.nav > li {
+  position: relative;
+  display: block;
+}
+.nav > li > a {
+  position: relative;
+  display: block;
+  padding: 10px 15px;
+  font-size: 14px;
+}
+.nav > li > a:hover,
+.nav > li > a:focus {
+  text-decoration: none;
+  background-color: #eee;
+}
+.nav > li > a > img {
+  max-width: none;
+}
+.nav > li > a > i {
+  margin-right: 5px;
+}
+
+.navbar {
+  position: relative;
+  min-height: 50px;
+  margin-bottom: 20px;
+  border: 1px solid transparent;
+}
+@media (min-width: 768px) {
+  .navbar {
+    border-radius: 4px;
+  }
+}
+@media (min-width: 768px) {
+  .navbar-header {
+    float: left;
+  }
+}
+
+@media (min-width: 768px) {
+  .navbar-fixed-top {
+    padding-right: 0;
+    padding-left: 0;
+  }
+}
+.navbar-fixed-top {
+  max-height: 340px;
+}
+.container > .navbar-header,
+.container-fluid > .navbar-header {
+  margin-right: -15px;
+  margin-left: -15px;
+}
+@media (min-width: 768px) {
+  .container > .navbar-header,
+  .container-fluid > .navbar-header {
+    margin-right: 0;
+    margin-left: 0;
+  }
+}
+
+.navbar-fixed-top {
+  position: fixed;
+  right: 0;
+  left: 0;
+  z-index: 1030;
+}
+@media (min-width: 768px) {
+  .navbar-fixed-top {
+    border-radius: 0;
+  }
+}
+.navbar-fixed-top {
+  top: 0;
+  border-width: 0 0 1px;
+}
+.navbar-fixed-bottom {
+  bottom: 0;
+  margin-bottom: 0;
+  border-width: 1px 0 0;
+}
+.navbar-brand {
+  float: left;
+  height: 50px;
+  padding: 15px 15px;
+  font-size: 18px;
+  line-height: 20px;
+}
+.navbar-brand:hover,
+.navbar-brand:focus {
+  text-decoration: none;
+}
+.navbar-brand > img {
+  display: block;
+}
+@media (min-width: 768px) {
+  .navbar > .container .navbar-brand,
+  .navbar > .container-fluid .navbar-brand {
+    margin-left: -15px;
+  }
+}
+
+.navbar-nav {
+  margin: 7.5px -15px;
+}
+.navbar-nav > li > a {
+  padding-top: 10px;
+  padding-bottom: 10px;
+  line-height: 20px;
+}
+@media (min-width: 768px) {
+  .navbar-nav {
+    float: left;
+    margin: 0;
+  }
+  .navbar-nav > li {
+    float: left;
+  }
+  .navbar-nav > li > a {
+    padding-top: 15px;
+    padding-bottom: 15px;
+  }
+}
+
+@media (min-width: 768px) {
+  .navbar-left {
+    float: left !important;
+  }
+  .navbar-right {
+    float: right !important;
+    margin-right: -15px;
+  }
+  .navbar-right ~ .navbar-right {
+    margin-right: 0;
+  }
+}
+
+.navbar-inverse {
+  background-color: #222;
+  border-color: #080808;
+}
+.navbar-inverse .navbar-brand {
+  color: #9d9d9d;
+}
+.navbar-inverse .navbar-brand:hover,
+.navbar-inverse .navbar-brand:focus {
+  color: #fff;
+  background-color: transparent;
+}
+.navbar-inverse .navbar-text {
+  color: #9d9d9d;
+}
+.navbar-inverse .navbar-nav > li > a {
+  color: #9d9d9d;
+}
+.navbar-inverse .navbar-nav > li > a:hover,
+.navbar-inverse .navbar-nav > li > a:focus {
+  color: #fff;
+  background-color: transparent;
+}
+.navbar-inverse .navbar-nav > .active > a,
+.navbar-inverse .navbar-nav > .active > a:hover,
+.navbar-inverse .navbar-nav > .active > a:focus {
+  color: #fff;
+  background-color: #080808;
+}
+
+.navbar-header .navbar-brand {
+  color: #e0e0e0;
+}
+
+/* Misc */
+
+.wy-side-scroll .wy-side-nav-search .icon,
+.wy-side-scroll .wy-side-nav-search .version {
+  display: none;
+  visibility: none;
+}
+
+@media (min-width: 768px) {
+  .wy-side-scroll {
+    padding-bottom: 50px;
+  }
+}
+
+.navbar-header .navbar-brand {
+  color: #e0e0e0;
+  background: url("../_static/platformio-logo-xs.png") no-repeat;
+  background-position: 5px 0;
+  padding-left: 50px;
+  font-weight: 500;
+}
+
+.navbar .github-corner {
+  display: none;
+}
+
+.navbar .github-corner svg {
+  fill: #fff;
+  color: #080808;
+  position: absolute;
+  top: -1px;
+  right: 0;
+  border: 0;
+  width: 50px;
+  height: 50px;
+  transform: scale(1, 1);
+}
+
+@media screen and (min-width: 992px) {
+  .navbar .github-corner {
+    display: block;
+  }
+}
+
+.navbar-inverse .navbar-nav > li.nav-pioplus > a,
+.navbar-inverse .navbar-nav > li.nav-pioplus > a:visited
+{
+  color: #ff6600;
+}
+
+.navbar-inverse .navbar-nav > li.nav-pioplus > a:hover {
+  color: #ff9900;
+}
+
+.top-banner {
+  display: block;
+  padding: 10px 20px;
+  font-weight: bold;
+  font-size: 14px;
+  color: #fff;
+  text-align: center;
+  background-color: #0275d8;
+}
+
+.top-banner:hover {
+  color: #fff;
+  text-decoration: none;
+  background-color: #025ebb;
+}
+
+.top-banner:visited {
+  color: #fff;
+  text-decoration: none;
+}

docs/_templates/footer.html

@@ -0,0 +1,63 @@
+{% extends "!footer.html" %}
+
+{% block extrafooter %}
+<link rel="stylesheet" href="{{ pathto('_static/extra.css', 1) }}" type="text/css" />
+<header id="pionav" class="navbar navbar-inverse navbar-fixed-top">
+  <a href="https://github.com/platformio" target="_blank" class="github-corner">
+    <svg viewBox="0 0 250 250">
+      <path d="M0,0 L115,115 L130,115 L142,142 L250,250 L250,0 Z"></path>
+      <path d="M128.3,109.0 C113.8,99.7 119.0,89.6 119.0,89.6 C122.0,82.7 120.5,78.6 120.5,78.6 C119.2,72.0 123.4,76.3 123.4,76.3 C127.3,80.9 125.5,87.3 125.5,87.3 C122.9,97.6 130.6,101.9 134.4,103.2" fill="currentColor" style="transform-origin: 130px 106px;" class="octo-arm"></path>
+      <path d="M115.0,115.0 C114.9,115.1 118.7,116.5 119.8,115.4 L133.7,101.6 C136.9,99.2 139.9,98.4 142.2,98.6 C133.8,88.0 127.5,74.4 143.8,58.0 C148.5,53.4 154.0,51.2 159.7,51.0 C160.3,49.4 163.2,43.6 171.4,40.1 C171.4,40.1 176.1,42.5 178.8,56.2 C183.1,58.6 187.2,61.8 190.9,65.4 C194.5,69.0 197.7,73.2 200.1,77.6 C213.8,80.2 216.3,84.9 216.3,84.9 C212.7,93.1 206.9,96.0 205.4,96.6 C205.1,102.4 203.0,107.8 198.3,112.5 C181.9,128.9 168.3,122.5 157.7,114.1 C157.9,116.9 156.7,120.9 152.7,124.9 L141.0,136.5 C139.8,137.7 141.6,141.9 141.8,141.8 Z" fill="currentColor" class="octo-body"></path>
+    </svg>
+  </a>
+  <div class="container container-fluid">
+    <div class="navbar-header">
+      <a class="navbar-brand" href="http://platformio.org">PlatformIO</a>
+    </div>
+
+    <nav role="navigation">
+      <div>
+        <ul class="nav navbar-nav">
+          <li><a href="http://platformio.org/get-started"><i class="fa fa-rocket fa-lg"></i>Get Started</a></li>
+          <li><a href="http://platformio.org/platformio-ide"><i class="fa fa-cube fa-lg"></i>IDE</a></li>
+          <li><a href="http://platformio.org/platforms"><i class="fa fa-wrench fa-lg"></i>Development</a></li>
+          <li ><a href="http://platformio.org/lib"><i class="fa fa-code fa-lg"></i>Libraries</a></li>
+        </ul>
+
+        <ul class="nav navbar-nav navbar-right">
+          <li class="active"><a href="http://docs.platformio.org"><i class="fa fa-book fa-lg"></i>Docs</a></li>
+          <li><a href="https://community.platformio.org"><i class="fa fa-comments-o fa-lg"></i>Community</a></li>
+          <li class="nav-pioplus"><a href="https://pioplus.com"><i class="fa fa-cubes fa-lg"></i>Plus</a></li>
+        </ul>
+      </div>
+
+    </nav>
+  </div>
+</header>
+<script>
+(function() {
+  var runMyCode = function($) {
+    $(window).ready(function() {
+        if ($('#pionav').css('display') !== 'block') {
+            return;
+        }
+        function fixScroll() {
+            $(window).scrollTop($(window).scrollTop() - 50);
+        }
+        window.setTimeout(fixScroll, 50);
+        $(window).on('hashchange', function(e){fixScroll();});
+    });
+  };
+
+  var timer = function() {
+    if (window.jQuery) {
+      runMyCode(window.jQuery);
+    } else {
+      window.setTimeout(timer, 50);
+    }
+  };
+  timer();
+})();
+</script>
+{{ super() }}
+{% endblock %}

docs/articles.rst

@@ -1,21 +1,117 @@
+..  Copyright 2014-present PlatformIO <contact@platformio.org>
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+       http://www.apache.org/licenses/LICENSE-2.0
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+
 .. _articles:
 
 Articles about us
 =================
 
 .. note::
-	If you've written article about PlatformIO and would like it listed on
-	this page, `please edit this page <https://github.com/platformio/platformio/blob/develop/docs/articles.rst>`_.
+    If you've written article about PlatformIO and would like it listed on
+    this page, `please edit this page <https://github.com/platformio/platformio/blob/develop/docs/articles.rst>`_.
 
-Here are recent articles about PlatformIO:
+Here are recent articles/reviews about PlatformIO:
 
+2016
+^^^^
+
+* Sep 12, 2016 - **Pedro Minatel** - `OTA – Como programar o ESP8266 pelo WiFi no platformIO (OTA programming for ESP8266 via Wi-Fi using PlatformIO, Portuguese) <http://pedrominatel.com.br/esp8266/ota-como-programar-o-esp8266-pelo-wifi-no-platformio/>`_
+* Sep 2, 2016 - **Tinkerman** `ESP8266: Optimizing files for SPIFFS with Gulp <http://tinkerman.cat/optimizing-files-for-spiffs-with-gulp/>`_
+* Aug 28, 2016 - **Tom Parker** `Using the BBC micro:bit with PlatformIO <http://www.lshift.net/blog/2016/08/28/using-the-bbc-microbit-with-platformio/>`_
+* Aug 24, 2016 - **Primal Cortex** `Cloud based continuous integration and delivery for IOT using PlatformIO <https://primalcortex.wordpress.com/2016/08/24/cloud-based-continuous-integration-and-delivery-for-iot-using-platformio/>`_
+* Aug 18, 2016 - **Primal Cortex** - `Installing PlatformIO on Arch Linux <https://primalcortex.wordpress.com/2016/08/18/platformio/>`_
+* Jul 26, 2016 - **Embedded Systems Laboratory** - `แนะนำการใช้งาน PlatformIO IDE สำหรับบอร์ด Arduino และ ESP8266 (Get started with PlatformIO IDE for Arduino board and ESP8266, Thai) <http://cpre.kmutnb.ac.th/esl/learning/index.php?article=intro_platformio-ide>`_
+* Jul 15, 2016 - **Jaime** - `ESP8266 Mobile Rick Roll Captive Portal <https://hackaday.io/project/12709-esp8266-mobile-rick-roll-captive-portal>`_
+* Jul 5, 2016 - **Ivan Kravets, Ph.D.** - `Explore the new development instruments for Arduino with PlatformIO ecosystem <http://www.slideshare.net/ivankravets/explore-the-new-development-instruments-for-arduino-with-platformio-ecosystem>`_
+* Jul 5, 2016 - **Belinda** - `Monte Bianco Arduino Developer Summit <http://www.arduino.org/blog/arduino-developer-summit>`_
+* Jul 1, 2016 - **Tam Hanna** - `Mikrocontroller-Gipfel in den Alpen: Arduino Developer Summit, Tag eins (Microcontroller peaks in the Alps: Arduino Developer Summit, Day One, German) <http://www.heise.de/make/meldung/Mikrocontroller-Gipfel-in-den-Alpen-Arduino-Developer-Summit-Tag-eins-3252421.html>`_
+* Jun 14, 2016 - **Glyn Hudson** - `OpenEnergyMonitor Part 2/3: Firmware Continuous Test & Build <https://blog.openenergymonitor.org/2016/06/auto-build-continuous-test-firmware/>`_
+* Jun 13, 2016 - **Daniel Eichhorn** - `New Weather Station Demo on Github <http://blog.squix.org/2016/06/new-weather-station-demo-on-github.html>`_
+* Jun 12, 2016 - **Glyn Hudson** - `OpenEnergyMonitor Part 1/3: PlatformIO open-source embedded development ecosystem <https://blog.openenergymonitor.org/2016/06/platformio/>`_
+* Jun 12, 2016 - **Uli Wolf** - `Nutzung von PlatformIO im Atom Editor zur Entwicklung von Arduino Code (Use PlatformIO and Atom Editor to develop Arduino code, German) <https://wolf-u.li/5668/nutzung-von-platform-io-im-atom-editor-zur-entwicklung-von-arduino-code/>`_
+* Jun 3, 2016 - **Daniel Eichhorn** - `ESP8266: Continuous Delivery Pipeline – Push To Production <http://blog.squix.org/2016/06/esp8266-continuous-delivery-pipeline-push-to-production.html>`_
+* May 30, 2016 - **Ron Moerman** - `IoT Development with PlatformIO <https://electronicsworkbench.io/blog/platformio>`_
+* May 29, 2016 - **Chris Synan** - `Reverse Engineer RF Remote Controller for IoT! <http://www.instructables.com/id/Reverse-Engineer-RF-Remote-Controller-for-IoT/?ALLSTEPS>`_
+* May 26, 2016 - **Charlie Key** - `7 Best Developer Tools To Build Your NEXT Internet of Things Application <https://www.losant.com/blog/7-best-developer-tools-to-build-your-next-internet-of-things-application>`_
+* May 22, 2016 - **Pedro Minatel** - `Estação meteorológica com ESP8266 (Weather station with ESP8266, Portuguese) <http://pedrominatel.com.br/esp8266/estacao-meteorologica-com-esp8266/>`_
+* May 16, 2016 - **Pedro Minatel** - `Controle remoto WiFi com ESP8266 (WiFi remote control using ESP8266, Portuguese) <http://pedrominatel.com.br/esp8266/controle-remoto-wifi-com-esp8266/>`_
+* May 11, 2016 - **Jo Vandeginste** - `Using PlatformIO to compile for Jeelabs' Jeenode Micro <http://jovandeginste.github.io/2016/05/11/using-platformio-to-compile-for-jeelabs-jeenode-micro.html>`_
+* May 08, 2016 - **Radoslaw Bob** - `Touch controlled buzzer (Nodemcu ESP8266) <https://gettoknowthebob.wordpress.com/2016/05/08/touch-controlled-buzzer-nodemcu-esp8266/>`_
+* May 06, 2016 - **Jean Roux** - `The IoT building blocks I use for my home-automation projects <http://iotplay.blogspot.com/2016/05/the-components-i-use-for-my-projects.html>`_
+* May 05, 2016 - **Ivan Kravets, Ph.D. / Eclipse Virtual IoT Meetup** - `PlatformIO: a cross-platform IoT solution to build them all! <http://www.meetup.com/Virtual-IoT/events/229964142/>`_
+* May 01, 2016 - **Pedro Minatel** - `PlatformIO – Uma alternativa ao Arduino IDE (PlatformIO - An alternative to the Arduino IDE, Portuguese) <http://pedrominatel.com.br/ferramentas/platformio-uma-alternativa-ao-arduino-ide/>`_
+* Apr 23, 2016 - **Al Williams** - `Hackaday: Atomic Arduino (and Other) Development <http://hackaday.com/2016/04/23/atomic-arduino-and-other-development/>`_
+* Apr 16, 2016 - **Sathittham Sangthong** - `[PlatformIO] มาลองเล่น PlatformIO แทน Arduino IDE กัน (Let's play together with PlatformIO IDE [alternative to Arduino IDE], Thai) <http://www.sathittham.com/platformio/platformio-ide/>`_
+* Apr 15, 2016 - **Daniel Eichhorn** - `ESP8266: Offline Debugging with the Platformio Environment <http://blog.squix.org/2016/04/esp8266-offline-debugging-with.html>`_
+* Apr 11, 2016 - **Matjaz Trcek** - `Top 5 Arduino integrated development environments <https://codeandunicorns.com/top-5-arduino-integrated-development-environments-ide/>`_
+* Apr 06, 2016 - **Aleks** - `PlatformIO ausprobiert (Tried PlatformIO, German) <http://5volt-junkie.net/platformio/>`_
+* Apr 02, 2016 - **Diego Pinto** - `Você tem coragem de abandonar a IDE do Arduino? PlatformIO + Atom (Do you dare to leave the Arduino IDE? PlatformIO + Atom, Portuguese) <http://www.clubemaker.com.br/?rota=artigo/81>`_
+* Mar 30, 2016 - **Brandon Cannaday** - `Getting Started with PlatformIO and ESP8266 NodeMcu <https://www.losant.com/blog/getting-started-with-platformio-esp8266-nodemcu>`_
+* Mar 29, 2016 - **Pablo Peñalve** - `PlatformIO + Geany + Raspberry PI, Spanish <http://ret-catriel.blogspot.com/2016/03/framework-platformio-geany-raspberry-pi.html>`_
+* Mar 24, 2016 - **NAzT** - `PlatformIO และการปรับแต่ง เพื่อใช้สำหรับพัฒนา Arduino Library (PlatformIO and advanced development for Arduino Library, Thai) <http://cmmakerclub.com/2016/03/tools-2/config-platformio-for-arduino-framework-developer/>`_
+* Mar 16, 2016 - **Jakub Skořepa** - `Instalace PlatformIO (PlatformIO IDE Installation, Czech) <http://ok1kvk.cz/clanek/2016/instalace-platformio/>`_
+* Mar 12, 2016 - **Peter Marks** - `PlatformIO, the Arduino IDE for programmers <http://blog.marxy.org/2016/03/platformio-arduino-ide-for-programmers.html>`_
+* Mar 12, 2016 - **Richard Arthurs** - `Getting Started With PlatformIO <http://richarthurs.com/2016/03/12/platformio-review-and-first-thoughts/>`_
+* Mar 07, 2016 - **Joran Jessurun** - `Nieuwe wereld met PlatformIO (New world with PlatformIO, Dutch) <http://blog.wisclub.nl/#post178>`_
+* Mar 05, 2016 - **brichacek.net** - `PlatformIO – otevřený ekosystém pro vývoj IoT (PlatformIO – an open source ecosystem for IoT development, Czech) <http://blog.brichacek.net/platformio-otevreny-ekosystem-pro-vyvoj-iot/>`_
+* Mar 04, 2016 - **Ricardo Vega** - `Programa tu Arduino desde Atom (Program your Arduino from Atom, Spanish) <http://ricveal.com/blog/programa-arduino-desde-atom/>`_
+* Feb 28, 2016 - **Alex Bloggt** - `PlatformIO vorgestellt (Introduction to PlatformIO IDE, German) <https://alexbloggt.com/platformio-vorgestellt/>`_
+* Feb 25, 2016 - **NutDIY** - `PlatformIO Blink On Nodemcu Dev Kit V1.0 (Thai) <http://nutdiy.blogspot.com/2016/02/platformio-blink-on-nodemcu-dev-kit-v10.html>`_
+* Feb 23, 2016 - **Ptarmigan Labs** - `ESP8266 Over The Air updating – what are the options? <https://ptarmiganlabs.com/blog/2016/02/23/esp8266-over-the-air-updating-what-are-the-options/>`_
+* Feb 22, 2016 - **Grzegorz Hołdys** - `How to Integrate PlatformIO with Netbeans <http://www.instructables.com/id/How-to-Integrate-PlatformIO-With-Netbeans/>`_
+* Feb 19, 2016 - **Embedds** - `Develop easier with PlatformIO ecosystem <http://www.embedds.com/develop-easier-with-platformio-ecosystem/>`_
+* Feb 13, 2016 - **Robert Cudmore** - `Programming an arduino with PlatformIO <http://blog.cudmore.io/post/2016/02/13/Programming-an-arduino-with-platformio/>`_
+* Jan 24, 2016 - **Sergey Prilukin** - `How to use IntelliJ IDEA to develop and upload software for micro controllers like Arduino <http://jandevblog.blogspot.com/2016/01/how-to-use-intellij-idea-to-develop-and.html>`_
+* Jan 16, 2016 - **Dani Eichhorn** - `ESP8266 Arduino IDE Alternative: PlatformIO <http://blog.squix.ch/2016/01/esp8266-arduino-ide-alternative.html>`_
+* Jan 11, 2016 - **David Mills, Ph.D.** - `STM NUCLEOF401RE TIMER IO <http://webshed.org/wiki/STM_NUCLEOF401RE_TIMER_IO>`_
+* Jan 05, 2016 - **Julien Rodrigues** - `Internet Of Things: The IDE scandal <https://medium.com/@jrodrigues/internet-of-things-the-ide-scandal-5ddb8fc9d918>`_
+
+2015
+^^^^
+
+* Dec 22, 2015 - **Jan Penninkhof** - `Over-the-Air ESP8266 programming using PlatformIO <http://www.penninkhof.com/2015/12/1610-over-the-air-esp8266-programming-using-platformio/>`_
+* Dec 15, 2015 - **stastaka** - `PlatformIOでカスタムボードを使う (Use a custom board for PlatformIO, Japanese) <http://qiita.com/stastaka/items/a6a50dbbb2933bd78bdd>`_
+* Dec 08, 2015 - **Piotr Król** - `Using PlatformIO with TI MSP430 LunchPads <http://blog.3mdeb.com/2015/12/08/using-platformio-with-ti-msp430-lunchpads/>`_
+* Dec 01, 2015 - **Michał Seroczyński** - `Push Notification from Arduino Yún with motion sensor <http://www.ches.pl/push-from-yun-1/>`_
+* Dec 01, 2015 - **JetBrains CLion Blog** - `C++ Annotated: Fall 2015. Arduino Support in CLion using PlatformIO <http://blog.jetbrains.com/clion/2015/12/cpp-annotated-fall-2015/>`_
+* Dec 01, 2015 - **Tateno Yuichi** - `ESP8266 を CUI で開発する (Develop a ESP8266 in CUI, Japanese) <http://jaywiggins.com/platformio/arduino/avr/es8266/2015/09/30/platformio-investigation/>`_
+* Nov 29, 2015 - **Keith Hughes** - `Using PlatformIO for Embedded Projects <http://smartspacestuff.blogspot.com/2015/11/using-platformio-for-embedded-projects.html>`_
+* Nov 22, 2015 - **Michał Seroczyński** - `Using PlatformIO to get started with Arduino in CLion IDE <http://www.ches.pl/using-platformio-get-started-arduino-clion-ide/>`_
+* Nov 09, 2015 - **ÁLvaro García Gómez** - `Programar con Arduino "The good way" (Programming with Arduino "The good way", Spanish) <http://congdegnu.es/2015/11/09/programar-con-arduino-the-good-way/>`_
+* Nov 06, 2015 - **nocd5** - `PlatformIOでmbedをオフラインビルドしSTM32 Nucleoボードでmrubyを使う (Use mruby in the offline build for STM32 Nucleo board with mbed and PlatformIO, Japanese) <http://qiita.com/nocd5/items/d5fda776240f7e7c17eb>`_
+* Oct 21, 2015 - **Vittorio Zaccaria** - `Using a cheap STM32 Nucleo to teach remote sensor monitoring <http://www.vittoriozaccaria.net/blog/2015/10/21/using-a-cheap-stm32-nucleo-to-teach-remote-sensor-monitoring.html>`_
+* Oct 18, 2015 - **Nico Coetzee** - `First Arduino I2C Experience with PlatformIO <https://electronicventurer.wordpress.com/2015/10/18/first-arduino-i2c-experience/>`_
+* Oct 10, 2015 - **Floyd Hilton** - `Programming Arduino with Atom <http://floydhilton.com/software/career/2015/10/10/Arduino_with_Atom.html>`_
+* Oct 01, 2015 - **Mistan** - `Compile and Upload Arduino Sketch with PlatformIO for Raspberry Pi Running Arch Linux <http://tech.memoryimprintstudio.com/code-building-for-arduino-with-platformio-for-raspberry-pi-with-arch-linux/>`_
+* Sep 30, 2015 - **Jay Wiggins** - `PlatformIO Investigation <http://jaywiggins.com/platformio/arduino/avr/es8266/2015/09/30/platformio-investigation/>`_
+* Sep 01, 2015 - **Thomas P. Weldon, Ph.D.** - `Improvised MBED FRDM-K64F Eclipse/PlatformIO Setup and Software Installation <http://thomasweldon.com/tpw/courses/embeddsp/p00pcFrdmK64_eclipsePlatformioSetup.html>`_
+* Aug 08, 2015 - **Josh Glendenning** - `Armstrap Eagle and PlatformIO <http://isobit.io/2015/08/08/armstrap.html>`_
+* Aug 01, 2015 - **Russell Davis** - `PlatformIO on the Raspberry Pi <http://www.russelldavis.org/2015/08/01/platformio-on-the-raspberry-pi/>`_
+* Jul 25, 2015 - **DinoTools** - `Erste Schritte mit PlatformIO (Getting Started with PlatformIO, German) <https://www.dinotools.de/2015/07/25/erste-schritte-mit-platformio/>`_
 * Jul 20, 2015 - **Eli Fatsi** - `Arduino Development in Atom Editor <http://viget.com/extend/arduino-development-in-atom-editor>`_
-* Jun 02, 2015 - **Alejandro Guirao Rodriguez** - `Discovering PlatformIO: The RaspberryPi / Arduino combo kit is a winner option when prototyping an IoT-style project <http://lekum.org/posts/discovering-platformio.html>`_
+* Jul 14, 2015 - **ElbinarIO** - `Programar para Arduino y otros microcontroladores desde la linea de comandos (Program Arguino and other microcontrollers from the command line, Spanish) <http://elbinario.net/2015/07/14/programar-para-arduino-y-otros-microcontroladores-desde-la-linea-de-comandos/>`_
+* Jul 11, 2015 - **TrojanC** - `Learning Arduino GitHub Repository <http://www.trojanc.co.za/2015/07/11/learning-arduino-github-repository/>`_
+* Jul 07, 2015 - **Sho Hashimoto** - `PlatformIOでArduino開発する(Arduino development in PlatformIO, Japanese) <http://shokai.org/blog/archives/10250>`_
+* Jun 02, 2015 - **Alejandro Guirao Rodríguez** - `Discovering PlatformIO: The RaspberryPi / Arduino combo kit is a winner option when prototyping an IoT-style project <http://lekum.org/posts/discovering-platformio/index.html>`_
+* May 17, 2015 - **S.S** - `コマンドラインでArduino開発 : vim + platformio (Arduino development at the command line: VIM + PlatformIO, Japanese) <http://qiita.com/caad1229/items/7b5fb47f034ae6e0baf2>`_
 * May 11, 2015 - **IT Hare** - `From Web Developer to Embedded One: Interview with Ivan Kravets, The Guy Behind PlatformIO. Part II <http://ithare.com/from-web-developer-to-embedded-one-interview-with-ivan-kravets-the-guy-behind-platformio-part-ii/>`_
 * May 4, 2015 - **IT Hare** - `From Web Developer to Embedded One: Interview with Ivan Kravets, The Guy Behind PlatformIO. Part I <http://ithare.com/from-web-development-to-embedded-one-interview-with-ivan-kravets-the-guy-behind-platformio-part-i/>`_
-* April 17, 2015 - **Michael Ball** - `PlatformIO - A Cross-Platform Code Builder and Missing Library Manager <http://arduino-pi.blogspot.com.es/2015/04/platformio-cross-platform-code-builder.html>`_
-* March 23, 2015 - **Atmel** - `Cross-board and cross-vendor embedded development with PlatformIO <http://blog.atmel.com/2015/03/23/cross-board-and-cross-vendor-embedded-development-with-platformio/>`_
-* March 22, 2015 - **Mark VandeWettering** - `Discovered a new tool for embedded development: PlatformIO <http://brainwagon.org/2015/03/22/discovered-a-new-tool-for-embedded-development-platformio/>`_
-* October 7, 2014 - **Ivan Kravets** - `Integration of PlatformIO library manager to Arduino and Energia IDEs <http://www.ikravets.com/computer-life/platformio/2014/10/07/integration-of-platformio-library-manager-to-arduino-and-energia-ides>`_
-* June 20, 2014 - **Ivan Kravets** - `Building and debugging Atmel AVR (Arduino-based) project using Eclipse IDE+PlatformIO <http://www.ikravets.com/computer-life/programming/2014/06/20/building-and-debugging-atmel-avr-arduino-based-project-using-eclipse-ideplatformio>`_
-* June 17, 2014 - **Ivan Kravets** - `How was PlatformIO born or why I love Python World <http://www.ikravets.com/computer-life/programming/2014/06/17/how-was-platformio-born-or-why-i-love-python-world>`_
+* Apr 17, 2015 - **Michael Ball** - `PlatformIO - A Cross-Platform Code Builder and Missing Library Manager <http://arduino-pi.blogspot.com.es/2015/04/platformio-cross-platform-code-builder.html>`_
+* Mar 23, 2015 - **Atmel** - `Cross-board and cross-vendor embedded development with PlatformIO <http://blog.atmel.com/2015/03/23/cross-board-and-cross-vendor-embedded-development-with-platformio/>`_
+* Mar 22, 2015 - **Mark VandeWettering** - `Discovered a new tool for embedded development: PlatformIO <http://brainwagon.org/2015/03/22/discovered-a-new-tool-for-embedded-development-platformio/>`_
+* Feb 25, 2015 - **Hendrik Putzek** - `Use your favourite IDE together with Arduino <http://blog.putzek.com/2015/02/your-favourite-ide-with-arduino.html>`_
+
+2014
+^^^^
+
+* Oct 7, 2014 - **Ivan Kravets, Ph.D.** - `Integration of PlatformIO library manager to Arduino and Energia IDEs <http://www.ikravets.com/computer-life/platformio/2014/10/07/integration-of-platformio-library-manager-to-arduino-and-energia-ides>`_
+* Jun 20, 2014 - **Ivan Kravets, Ph.D.** - `Building and debugging Atmel AVR (Arduino-based) project using Eclipse IDE+PlatformIO <http://www.ikravets.com/computer-life/programming/2014/06/20/building-and-debugging-atmel-avr-arduino-based-project-using-eclipse-ideplatformio>`_
+* Jun 17, 2014 - **Ivan Kravets, Ph.D.** - `How was PlatformIO born or why I love Python World <http://www.ikravets.com/computer-life/programming/2014/06/17/how-was-platformio-born-or-why-i-love-python-world>`_

docs/ci/appveyor.rst

@@ -1,3 +1,14 @@
+..  Copyright 2014-present PlatformIO <contact@platformio.org>
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+       http://www.apache.org/licenses/LICENSE-2.0
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+
 .. _ci_appveyor:
 
 AppVeyor
@@ -22,6 +33,8 @@ containing the build results (showing success or failure), or by posting a
 message on an IRC channel. It can be configured to build project on a range of
 different :ref:`platforms`.
 
+.. contents::
+
 Integration
 -----------
 
@@ -31,155 +44,20 @@ Put ``appveyor.yml`` to the root directory of the GitHub repository.
 
     build: off
     environment:
-        global:
-            WITH_COMPILER: "cmd /E:ON /V:ON /C .\\scripts\\appveyor\\run_with_compiler.cmd"
-        matrix:
-            - PLATFORMIO_CI_SRC: "path\\to\\source\\file.c"
-              PLATFORMIO_CI_SRC: "path\\to\\source\\file.ino"
-              PLATFORMIO_CI_SRC: "path\\to\\source\\directory"
-              WINDOWS_SDK_VERSION: "v7.0"
-              PYTHON_HOME: "C:\\Python27-x64"
-              PYTHON_VERSION: "2.7"
-              PYTHON_ARCH: "64"
-        install:
-          - "git submodule update --init --recursive"
-          - "powershell scripts\\appveyor\\install.ps1"
-        before_test:
-          - cmd: SET PATH=%PATH%;%PYTHON_HOME%;%PYTHON_HOME%\Scripts
-        test_script:
-          - '%WITH_COMPILER% %PYTHON_HOME%\\Scripts\\platformio ci --board=TYPE_1 --board=TYPE_2 --board=TYPE_N'
 
+      matrix:
+        - PLATFORMIO_CI_SRC: "path\\to\\source\\file.c"
+        - PLATFORMIO_CI_SRC: "path\\to\\source\\file.ino"
+        - PLATFORMIO_CI_SRC: "path\\to\\source\\directory"
 
-Then create ``scripts/appveyor`` folder and put these 2 scripts (they are the
-same for the all projects, don't need to modify them):
+    install:
+        - cmd: git submodule update --init --recursive
+        - cmd: SET PATH=%PATH%;C:\Python27\Scripts
+        - cmd: pip install -U platformio
 
-1. ``scripts/appveyor/install.ps1``:
+    test_script:
+        - cmd: platformio ci --board=<ID_1> --board=<ID_2> --board=<ID_N>
 
-.. code-block:: PowerShell
-
-    $BASE_URL = "https://www.python.org/ftp/python/"
-    $GET_PIP_URL = "https://bootstrap.pypa.io/get-pip.py"
-    $GET_PIP_PATH = "C:\get-pip.py"
-
-
-    function DownloadPython ($python_version, $platform_suffix) {
-        $webclient = New-Object System.Net.WebClient
-        $filename = "python-" + $python_version + $platform_suffix + ".msi"
-        $url = $BASE_URL + $python_version + "/" + $filename
-
-        $basedir = $pwd.Path + "\"
-        $filepath = $basedir + $filename
-        if (Test-Path $filename) {
-            Write-Host "Reusing" $filepath
-            return $filepath
-        }
-
-        # Download and retry up to 5 times in case of network transient errors.
-        Write-Host "Downloading" $filename "from" $url
-        $retry_attempts = 3
-        for($i=0; $i -lt $retry_attempts; $i++){
-            try {
-                $webclient.DownloadFile($url, $filepath)
-                break
-            }
-            Catch [Exception]{
-                Start-Sleep 1
-            }
-       }
-       Write-Host "File saved at" $filepath
-       return $filepath
-    }
-
-
-    function InstallPython ($python_version, $architecture, $python_home) {
-        Write-Host "Installing Python" $python_version "for" $architecture "bit architecture to" $python_home
-        if (Test-Path $python_home) {
-            Write-Host $python_home "already exists, skipping."
-            return $false
-        }
-        if ($architecture -eq "32") {
-            $platform_suffix = ""
-        } else {
-            $platform_suffix = ".amd64"
-        }
-        $filepath = DownloadPython $python_version $platform_suffix
-        Write-Host "Installing" $filepath "to" $python_home
-        $args = "/qn /i $filepath TARGETDIR=$python_home"
-        Write-Host "msiexec.exe" $args
-        Start-Process -FilePath "msiexec.exe" -ArgumentList $args -Wait -Passthru
-        Write-Host "Python $python_version ($architecture) installation complete"
-        return $true
-    }
-
-
-    function InstallPip ($python_home) {
-        $pip_path = $python_home + "/Scripts/pip.exe"
-        $python_path = $python_home + "/python.exe"
-        if (-not(Test-Path $pip_path)) {
-            Write-Host "Installing pip..."
-            $webclient = New-Object System.Net.WebClient
-            $webclient.DownloadFile($GET_PIP_URL, $GET_PIP_PATH)
-            Write-Host "Executing:" $python_path $GET_PIP_PATH
-            Start-Process -FilePath "$python_path" -ArgumentList "$GET_PIP_PATH" -Wait -Passthru
-        } else {
-            Write-Host "pip already installed."
-        }
-    }
-
-    function InstallPackage ($python_home, $pkg) {
-        $pip_path = $python_home + "/Scripts/pip.exe"
-        & $pip_path install -U $pkg
-    }
-
-    function InstallScons ($python_home) {
-        Write-Host "Start installing Scons"
-        $pip_path = $python_home + "/Scripts/pip.exe"
-        & $pip_path install --egg "http://dl.platformio.org/scons.zip"
-        Write-Host "Scons installed"
-    }
-
-    function main () {
-        InstallPython $env:PYTHON_VERSION $env:PYTHON_ARCH $env:PYTHON_HOME
-        InstallPip $env:PYTHON_HOME
-        InstallPackage $env:PYTHON_HOME setuptools
-        InstallPackage $env:PYTHON_HOME platformio
-        InstallScons $env:PYTHON_HOME
-    }
-
-    main
-
-2. ``scripts/appveyor/run_with_compiler.cmd``:
-
-.. code-block:: guess
-
-    @ECHO OFF
-
-    SET COMMAND_TO_RUN=%*
-    SET WIN_SDK_ROOT=C:\Program Files\Microsoft SDKs\Windows
-
-    SET MAJOR_PYTHON_VERSION="%PYTHON_VERSION:~0,1%"
-    IF %MAJOR_PYTHON_VERSION% == "2" (
-        SET WINDOWS_SDK_VERSION="v7.0"
-    ) ELSE IF %MAJOR_PYTHON_VERSION% == "3" (
-        SET WINDOWS_SDK_VERSION="v7.1"
-    ) ELSE (
-        ECHO Unsupported Python version: "%MAJOR_PYTHON_VERSION%"
-        EXIT 1
-    )
-
-    IF "%PYTHON_ARCH%"=="64" (
-        ECHO Configuring Windows SDK %WINDOWS_SDK_VERSION% for Python %MAJOR_PYTHON_VERSION% on a 64 bit architecture
-        SET DISTUTILS_USE_SDK=1
-        SET MSSdk=1
-        "%WIN_SDK_ROOT%\%WINDOWS_SDK_VERSION%\Setup\WindowsSdkVer.exe" -q -version:%WINDOWS_SDK_VERSION%
-        "%WIN_SDK_ROOT%\%WINDOWS_SDK_VERSION%\Bin\SetEnv.cmd" /x64 /release
-        ECHO Executing: %COMMAND_TO_RUN%
-        call %COMMAND_TO_RUN% || EXIT 1
-    ) ELSE (
-        ECHO Using default MSVC build environment for 32 bit architecture
-        ECHO Executing: %COMMAND_TO_RUN%
-        call %COMMAND_TO_RUN% || EXIT 1
-    )
 
 For more details as for PlatformIO build process please look into :ref:`cmd_ci`
 command.
@@ -194,20 +72,16 @@ Examples
 
     build: off
     environment:
-        global:
-            WITH_COMPILER: "cmd /E:ON /V:ON /C .\\scripts\\appveyor\\run_with_compiler.cmd"
-        matrix:
-            - PLATFORMIO_CI_SRC: "examples\\Bluetooth\\PS3SPP\\PS3SPP.ino"
-              PLATFORMIO_CI_SRC: "examples\\pl2303\\pl2303_gps\\pl2303_gps.ino"
-              WINDOWS_SDK_VERSION: "v7.0"
-              PYTHON_HOME: "C:\\Python27-x64"
-              PYTHON_VERSION: "2.7"
-              PYTHON_ARCH: "64"
-        install:
-          - "git submodule update --init --recursive"
-          - "powershell scripts\\appveyor\\install.ps1"
-        before_test:
-          - cmd: SET PATH=%PATH%;%PYTHON_HOME%;%PYTHON_HOME%\Scripts
-          - cmd: git clone https://github.com/xxxajk/spi4teensy3.git c:\spi4teensy
-        test_script:
-          - '%WITH_COMPILER% %PYTHON_HOME%\\Scripts\\platformio ci --lib="." --lib="c:\spi4teensy" --board=uno --board=teensy31 --board=due'
+
+      matrix:
+        - PLATFORMIO_CI_SRC: "examples\\Bluetooth\\PS3SPP\\PS3SPP.ino"
+        - PLATFORMIO_CI_SRC: "examples\\pl2303\\pl2303_gps\\pl2303_gps.ino"
+
+    install:
+        - cmd: git submodule update --init --recursive
+        - cmd: SET PATH=%PATH%;C:\Python27\Scripts
+        - cmd: pip install -U platformio
+        - cmd: git clone https://github.com/xxxajk/spi4teensy3.git C:\spi4teensy
+
+    test_script:
+        - cmd: platformio ci --lib="." --lib="C:\\spi4teensy" --board=uno --board=teensy31 --board=due

docs/ci/circleci.rst

@@ -1,3 +1,14 @@
+..  Copyright 2014-present PlatformIO <contact@platformio.org>
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+       http://www.apache.org/licenses/LICENSE-2.0
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+
 .. _ci_circleci:
 
 Circle CI
@@ -21,52 +32,174 @@ containing the build results (showing success or failure), or by posting a
 message on an IRC channel. It can be configured to build project on a range of
 different :ref:`platforms`.
 
+.. contents::
+
 Integration
 -----------
 
-Put ``circle.yml`` to the root directory of the GitHub repository.
+Please make sure to read Circle CI `Getting Started <https://circleci.com/docs/getting-started>`_
+guide first.
+
+.. code-block:: yaml
+
+    dependencies:
+        pre:
+            # Install the latest stable PlatformIO
+            - sudo pip install -U platformio
+
+    test:
+        override:
+            - platformio ci path/to/test/file.c --board=<ID_1> --board=<ID_2> --board=<ID_N>
+            - platformio ci examples/file.ino --board=<ID_1> --board=<ID_2> --board=<ID_N>
+            - platformio ci path/to/test/directory --board=<ID_1> --board=<ID_2> --board=<ID_N>
+
+
+For more details as for PlatformIO build process please look into :ref:`cmd_ci`.
+
+Project as a library
+~~~~~~~~~~~~~~~~~~~~
+
+When project is written as a library (where own examples or testing code use
+it), please use ``--lib="."`` option for :ref:`cmd_ci` command
+
+.. code-block:: yaml
+
+    script:
+        - platformio ci --lib="." --board=<ID_1> --board=<ID_2> --board=<ID_N>
+
+Library dependecies
+~~~~~~~~~~~~~~~~~~~
+
+There 2 options to test source code with dependent libraries:
+
+Install dependent library using :ref:`librarymanager`
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+.. code-block:: yaml
+
+    dependencies:
+        pre:
+            # Install the latest stable PlatformIO
+            - sudo pip install -U platformio
+
+            # OneWire Library with ID=1 http://platformio.org/lib/show/1/OneWire
+            - platformio lib -g install 1
+
+    test:
+        override:
+            - platformio ci path/to/test/file.c --board=<ID_1> --board=<ID_2> --board=<ID_N>
+
+Manually download dependent library and include in build process via ``--lib`` option
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+.. code-block:: yaml
+
+    dependencies:
+        pre:
+            # Install the latest stable PlatformIO
+            - sudo pip install -U platformio
+
+            # download library to the temporary directory
+            - wget https://github.com/PaulStoffregen/OneWire/archive/master.zip -O /tmp/onewire_source.zip
+            - unzip /tmp/onewire_source.zip -d /tmp/
+
+    test:
+        override:
+            - platformio ci path/to/test/file.c --lib="/tmp/OneWire-master" --board=<ID_1> --board=<ID_2> --board=<ID_N>
+
+Custom Build Flags
+~~~~~~~~~~~~~~~~~~
+
+PlatformIO allows to specify own build flags using :envvar:`PLATFORMIO_BUILD_FLAGS` environment
 
 .. code-block:: yaml
 
     machine:
         environment:
-            PLATFORMIO_CI_SRC: path/to/source/file.c
-            PLATFORMIO_CI_SRC: path/to/source/file.ino
-            PLATFORMIO_CI_SRC: path/to/source/directory
+            PLATFORMIO_BUILD_FLAGS: -D SPECIFIC_MACROS -I/extra/inc
 
-    dependencies:
-        pre:
-            - sudo apt-get install python2.7-dev
-            - sudo python -c "$(curl -fsSL https://raw.githubusercontent.com/platformio/platformio/master/scripts/get-platformio.py)"
+
+For the more details, please follow to
+:ref:`available build flags/options <projectconf_build_flags>`.
+
+
+Advanced configuration
+~~~~~~~~~~~~~~~~~~~~~~
+
+PlatformIO allows to configure multiple build environments for the single
+source code using :ref:`projectconf`.
+
+Instead of ``--board`` option, please use :option:`platformio ci --project-conf`
+
+.. code-block:: yaml
 
     test:
         override:
-            - platformio ci --board=TYPE_1 --board=TYPE_2 --board=TYPE_N
-
-
-For more details as for PlatformIO build process please look into :ref:`cmd_ci`
-command.
+            - platformio ci path/to/test/file.c --project-conf=/path/to/platoformio.ini
 
 Examples
 --------
 
-1. Integration for `USB_Host_Shield_2.0 <https://github.com/felis/USB_Host_Shield_2.0>`_
-   project. The ``circle.yml`` configuration file:
+1. Custom build flags
 
 .. code-block:: yaml
 
-    machine:
-        environment:
-            PLATFORMIO_CI_SRC: examples/Bluetooth/PS3SPP/PS3SPP.ino
-            PLATFORMIO_CI_SRC: examples/pl2303/pl2303_gps/pl2303_gps.ino
-
     dependencies:
+        cache_directories:
+            - "~/.platformio"
+
         pre:
-            - sudo apt-get install python2.7-dev
-            - sudo python -c "$(curl -fsSL https://raw.githubusercontent.com/platformio/platformio/master/scripts/get-platformio.py)"
-            - wget https://github.com/xxxajk/spi4teensy3/archive/master.zip -O /tmp/spi4teensy3.zip
-            - unzip /tmp/spi4teensy3.zip -d /tmp
+            - sudo pip install -U platformio
+
+            # pre-install PlatformIO development platforms, they will be cached
+            - platformio platform install atmelavr atmelsam teensy
+
+            #
+            # Libraries from PlatformIO Library Registry:
+            #
+            # http://platformio.org/lib/show/416/TinyGPS
+            # http://platformio.org/lib/show/417/SPI4Teensy3
+            - platformio lib -g install 416 417
 
     test:
         override:
-            - platformio ci --lib="." --lib="/tmp/spi4teensy3-master" --board=uno --board=teensy31 --board=due
+            - platformio ci examples/acm/acm_terminal --board=uno --board=teensy31 --board=due --lib="."
+            - platformio ci examples/adk/adk_barcode --board=uno --board=teensy31 --board=due --lib="."
+            - platformio ci examples/adk/ArduinoBlinkLED --board=uno --board=teensy31 --board=due --lib="."
+            - platformio ci examples/adk/demokit_20 --board=uno --board=teensy31 --board=due --lib="."
+            # ...
+            - platformio ci examples/Xbox/XBOXUSB --board=uno --board=teensy31 --board=due --lib="."
+
+* Configuration file: https://github.com/ivankravets/USB_Host_Shield_2.0/blob/master/circle.yml
+* Build History: https://circleci.com/gh/ivankravets/USB_Host_Shield_2.0/tree/master
+
+2. Dependency on external libraries
+
+.. code-block:: yaml
+
+    dependencies:
+        pre:
+            # Install the latest stable PlatformIO
+            - sudo pip install -U platformio
+
+            # download dependent libraries
+            - wget https://github.com/jcw/jeelib/archive/master.zip -O /tmp/jeelib.zip
+            - unzip /tmp/jeelib.zip -d /tmp
+
+            - wget https://github.com/Rodot/Gamebuino/archive/master.zip  -O /tmp/gamebuino.zip
+            - unzip /tmp/gamebuino.zip -d /tmp
+
+    test:
+        override:
+            -  platformio ci examples/backSoon/backSoon.ino --lib="." --lib="/tmp/jeelib-master" --lib="/tmp/Gamebuino-master/libraries/tinyFAT" --board=uno --board=megaatmega2560
+            -  platformio ci examples/etherNode/etherNode.ino --lib="." --lib="/tmp/jeelib-master" --lib="/tmp/Gamebuino-master/libraries/tinyFAT" --board=uno --board=megaatmega2560
+            -  platformio ci examples/getDHCPandDNS/getDHCPandDNS.ino --lib="." --lib="/tmp/jeelib-master" --lib="/tmp/Gamebuino-master/libraries/tinyFAT" --board=uno --board=megaatmega2560
+            -  platformio ci examples/getStaticIP/getStaticIP.ino --lib="." --lib="/tmp/jeelib-master" --lib="/tmp/Gamebuino-master/libraries/tinyFAT" --board=uno --board=megaatmega2560
+            # ...
+            -  platformio ci examples/twitter/twitter.ino --lib="." --lib="/tmp/jeelib-master" --lib="/tmp/Gamebuino-master/libraries/tinyFAT" --board=uno --board=megaatmega2560
+            -  platformio ci examples/udpClientSendOnly/udpClientSendOnly.ino --lib="." --lib="/tmp/jeelib-master" --lib="/tmp/Gamebuino-master/libraries/tinyFAT" --board=uno --board=megaatmega2560
+            -  platformio ci examples/udpListener/udpListener.ino --lib="." --lib="/tmp/jeelib-master" --lib="/tmp/Gamebuino-master/libraries/tinyFAT" --board=uno --board=megaatmega2560
+            -  platformio ci examples/webClient/webClient.ino --lib="." --lib="/tmp/jeelib-master" --lib="/tmp/Gamebuino-master/libraries/tinyFAT" --board=uno --board=megaatmega2560
+
+* Configuration file: hhttps://github.com/ivankravets/ethercard/blob/master/circle.yaml
+* Build History: https://circleci.com/gh/ivankravets/ethercard/tree/master

docs/ci/drone.rst

@@ -1,3 +1,14 @@
+..  Copyright 2014-present PlatformIO <contact@platformio.org>
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+       http://www.apache.org/licenses/LICENSE-2.0
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+
 .. _ci_drone:
 
 Drone
@@ -20,6 +31,8 @@ the way it has been configured to do so — for example, by sending an email
 containing the build results (showing success or failure). It can be
 configured to build project on a range of different :ref:`platforms`.
 
+.. contents::
+
 Integration
 -----------
 
@@ -37,8 +50,8 @@ Please fill all fields for your project in the Drone control panel:
 
 .. code-block:: bash
 
-    python -c "$(curl -fsSL https://raw.githubusercontent.com/platformio/platformio/master/scripts/get-platformio.py)"
-    platformio ci --board=TYPE_1 --board=TYPE_2 --board=TYPE_N
+    pip install -U platformio
+    platformio ci --board=<ID_1> --board=<ID_2> --board=<ID_N>
 
 .. image:: ../_static/droneci-platformio-integration-1.png
 
@@ -62,7 +75,7 @@ Examples
 
 .. code-block:: bash
 
-    python -c "$(curl -fsSL https://raw.githubusercontent.com/platformio/platformio/master/scripts/get-platformio.py)"
+    pip install -U platformio
     wget https://github.com/xxxajk/spi4teensy3/archive/master.zip -O /tmp/spi4teensy3.zip
     unzip /tmp/spi4teensy3.zip -d /tmp
     platformio ci --lib="." --lib="/tmp/spi4teensy3-master" --board=uno --board=teensy31 --board=due

docs/ci/index.rst

@@ -1,3 +1,14 @@
+..  Copyright 2014-present PlatformIO <contact@platformio.org>
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+       http://www.apache.org/licenses/LICENSE-2.0
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+
 .. _ci:
 
 Continuous Integration

docs/ci/shippable.rst

@@ -1,3 +1,14 @@
+..  Copyright 2014-present PlatformIO <contact@platformio.org>
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+       http://www.apache.org/licenses/LICENSE-2.0
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+
 .. _ci_shippable:
 
 Shippable
@@ -24,6 +35,8 @@ containing the build results (showing success or failure), or by posting a
 message on an IRC channel. It can be configured to build project on a range of
 different :ref:`platforms`.
 
+.. contents::
+
 Integration
 -----------
 
@@ -42,10 +55,10 @@ GitHub repository.
         - PLATFORMIO_CI_SRC=path/to/source/directory
 
     install:
-        - python -c "$(curl -fsSL https://raw.githubusercontent.com/platformio/platformio/master/scripts/get-platformio.py)"
+        - pip install -U platformio
 
     script:
-        - platformio ci --board=TYPE_1 --board=TYPE_2 --board=TYPE_N
+        - platformio ci --board=<ID_1> --board=<ID_2> --board=<ID_N>
 
 
 For more details as for PlatformIO build process please look into :ref:`cmd_ci`
@@ -68,7 +81,7 @@ Examples
         - PLATFORMIO_CI_SRC=examples/pl2303/pl2303_gps/pl2303_gps.ino
 
     install:
-        - python -c "$(curl -fsSL https://raw.githubusercontent.com/platformio/platformio/master/scripts/get-platformio.py)"
+        - pip install -U platformio
         - wget https://github.com/xxxajk/spi4teensy3/archive/master.zip -O /tmp/spi4teensy3.zip
         - unzip /tmp/spi4teensy3.zip -d /tmp
 

docs/ci/travis.rst

@@ -1,8 +1,26 @@
+..  Copyright 2014-present PlatformIO <contact@platformio.org>
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+       http://www.apache.org/licenses/LICENSE-2.0
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+
 .. _ci_travis:
 
 Travis CI
 =========
 
+.. image:: ../_static/ci-travis-logo.png
+    :target: https://docs.travis-ci.com/user/integration/platformio/
+
+
+**Travis CI** `officially supports <https://docs.travis-ci.com/user/integration/platformio/>`_
+**PlatformIO for Embedded Builds.**
+
 `Travis CI <http://en.wikipedia.org/wiki/Travis_CI>`_ is an open-source hosted,
 distributed continuous integration service used to build and test projects
 hosted at `GitHub <http://en.wikipedia.org/wiki/GitHub>`_.
@@ -21,10 +39,17 @@ containing the build results (showing success or failure), or by posting a
 message on an IRC channel. It can be configured to build project on a range of
 different :ref:`platforms`.
 
+.. contents::
+
 Integration
 -----------
 
-Please put ``.travis.yml`` to the root directory of the GitHub repository.
+Please make sure to read Travis CI `Getting Started <http://docs.travis-ci.com/user/getting-started/>`_
+and `general build configuration <http://docs.travis-ci.com/user/customizing-the-build/>`_
+guides first.
+
+PlatformIO is written in Python and is recommended to be run within
+`Travis CI Python isolated environment <http://docs.travis-ci.com/user/languages/python/#Travis-CI-Uses-Isolated-virtualenvs>`_:
 
 .. code-block:: yaml
 
@@ -32,28 +57,110 @@ Please put ``.travis.yml`` to the root directory of the GitHub repository.
     python:
         - "2.7"
 
+    # Cache PlatformIO packages using Travis CI container-based infrastructure
+    sudo: false
+    cache:
+        directories:
+            - "~/.platformio"
+
     env:
-        - PLATFORMIO_CI_SRC=path/to/source/file.c
-        - PLATFORMIO_CI_SRC=path/to/source/file.ino
-        - PLATFORMIO_CI_SRC=path/to/source/directory
+        - PLATFORMIO_CI_SRC=path/to/test/file.c
+        - PLATFORMIO_CI_SRC=examples/file.ino
+        - PLATFORMIO_CI_SRC=path/to/test/directory
 
     install:
-        - python -c "$(curl -fsSL https://raw.githubusercontent.com/platformio/platformio/master/scripts/get-platformio.py)"
+        - pip install -U platformio
 
     script:
-        - platformio ci --board=TYPE_1 --board=TYPE_2 --board=TYPE_N
+        - platformio ci --board=<ID_1> --board=<ID_2> --board=<ID_N>
+
+Then perform steps 1, 2 and 4 from http://docs.travis-ci.com/user/getting-started/
+
+For more details as for PlatformIO build process please look into :ref:`cmd_ci`.
+
+Project as a library
+~~~~~~~~~~~~~~~~~~~~
+
+When project is written as a library (where own examples or testing code use
+it), please use ``--lib="."`` option for :ref:`cmd_ci` command
+
+.. code-block:: yaml
+
+    script:
+        - platformio ci --lib="." --board=<ID_1> --board=<ID_2> --board=<ID_N>
+
+Library dependencies
+~~~~~~~~~~~~~~~~~~~~
+
+There 2 options to test source code with dependent libraries:
+
+Install dependent library using :ref:`librarymanager`
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+.. code-block:: yaml
+
+    install:
+        - pip install -U platformio
+
+        #
+        # Libraries from PlatformIO Library Registry:
+        #
+        # http://platformio.org/lib/show/1/OneWire
+        - platformio lib -g install 1
+
+Manually download dependent library and include in build process via ``--lib`` option
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+.. code-block:: yaml
+
+    install:
+        - pip install -U platformio
+
+        # download library to the temporary directory
+        - wget https://github.com/PaulStoffregen/OneWire/archive/master.zip -O /tmp/onewire_source.zip
+        - unzip /tmp/onewire_source.zip -d /tmp/
+
+    script:
+        - platformio ci --lib="/tmp/OneWire-master" --board=<ID_1> --board=<ID_2> --board=<ID_N>
+
+Custom Build Flags
+~~~~~~~~~~~~~~~~~~
+
+PlatformIO allows to specify own build flags using :envvar:`PLATFORMIO_BUILD_FLAGS` environment
+
+.. code-block:: yaml
+
+    env:
+        - PLATFORMIO_CI_SRC=path/to/test/file.c PLATFORMIO_BUILD_FLAGS="-D SPECIFIC_MACROS_PER_TEST_ENV -I/extra/inc"
+        - PLATFORMIO_CI_SRC=examples/file.ino
+        - PLATFORMIO_CI_SRC=path/to/test/directory
+
+    install:
+        - pip install -U platformio
+        - export PLATFORMIO_BUILD_FLAGS="-D GLOBAL_MACROS_FOR_ALL_TEST_ENV"
 
 
-Then see step 1, 2, and step 4 here: http://docs.travis-ci.com/user/getting-started/
+For the more details, please follow to
+:ref:`available build flags/options <projectconf_build_flags>`.
 
-For more details as for PlatformIO build process please look into :ref:`cmd_ci`
-command.
+
+Advanced configuration
+~~~~~~~~~~~~~~~~~~~~~~
+
+PlatformIO allows to configure multiple build environments for the single
+source code using :ref:`projectconf`.
+
+Instead of ``--board`` option, please use :option:`platformio ci --project-conf`
+
+.. code-block:: yaml
+
+    script:
+        - platformio ci --project-conf=/path/to/platoformio.ini
 
 Examples
 --------
 
-1. Integration for `USB_Host_Shield_2.0 <https://github.com/felis/USB_Host_Shield_2.0>`_
-   project. The ``.travis.yml`` configuration file:
+1. Custom build flags
 
 .. code-block:: yaml
 
@@ -61,6 +168,12 @@ Examples
     python:
         - "2.7"
 
+    # Cache PlatformIO packages using Travis CI container-based infrastructure
+    sudo: false
+    cache:
+        directories:
+            - "~/.platformio"
+
     env:
         - PLATFORMIO_CI_SRC=examples/acm/acm_terminal
         - PLATFORMIO_CI_SRC=examples/Bluetooth/WiiIRCamera PLATFORMIO_BUILD_FLAGS="-DWIICAMERA"
@@ -69,15 +182,88 @@ Examples
         # - ...
 
     install:
-        - python -c "$(curl -fsSL https://raw.githubusercontent.com/platformio/platformio/master/scripts/get-platformio.py)"
+        - pip install -U platformio
 
-        # Libraries from PlatformIO Library Registry
-        # http://platformio.org/#!/lib/show/416/TinyGPS
-        # http://platformio.org/#!/lib/show/417/SPI4Teensy3
-        - platformio lib install 416 417
+        #
+        # Libraries from PlatformIO Library Registry:
+        #
+        # http://platformio.org/lib/show/416/TinyGPS
+        # http://platformio.org/lib/show/417/SPI4Teensy3
+        - platformio lib -g install 416 417
 
     script:
         - platformio ci --board=uno --board=teensy31 --board=due --lib="."
 
 * Configuration file: https://github.com/felis/USB_Host_Shield_2.0/blob/master/.travis.yml
 * Build History: https://travis-ci.org/felis/USB_Host_Shield_2.0
+
+2. Dependency on external libraries
+
+.. code-block:: yaml
+
+    language: python
+    python:
+        - "2.7"
+
+    # Cache PlatformIO packages using Travis CI container-based infrastructure
+    sudo: false
+    cache:
+        directories:
+            - "~/.platformio"
+
+    env:
+        - PLATFORMIO_CI_SRC=examples/backSoon/backSoon.ino
+        - PLATFORMIO_CI_SRC=examples/etherNode/etherNode.ino
+        # -
+
+    install:
+        - pip install -U platformio
+
+        - wget https://github.com/jcw/jeelib/archive/master.zip -O /tmp/jeelib.zip
+        - unzip /tmp/jeelib.zip -d /tmp
+
+        - wget https://github.com/Rodot/Gamebuino/archive/master.zip  -O /tmp/gamebuino.zip
+        - unzip /tmp/gamebuino.zip -d /tmp
+
+    script:
+        - platformio ci --lib="." --lib="/tmp/jeelib-master" --lib="/tmp/Gamebuino-master/libraries/tinyFAT" --board=uno --board=megaatmega2560
+
+* Configuration file: https://github.com/jcw/ethercard/blob/master/.travis.yml
+* Build History: https://travis-ci.org/jcw/ethercard
+
+3. Dynamic testing of the boards
+
+.. code-block:: yaml
+
+    language: python
+    python:
+        - "2.7"
+
+    # Cache PlatformIO packages using Travis CI container-based infrastructure
+    sudo: false
+    cache:
+        directories:
+            - "~/.platformio"
+
+    env:
+        - PLATFORMIO_CI_SRC=examples/TimeArduinoDue PLATFORMIO_CI_EXTRA_ARGS="--board=due"
+        - PLATFORMIO_CI_SRC=examples/TimeGPS
+        - PLATFORMIO_CI_SRC=examples/TimeNTP
+        - PLATFORMIO_CI_SRC=examples/TimeTeensy3 PLATFORMIO_CI_EXTRA_ARGS="--board=teensy31"
+        # - ...
+
+    install:
+        - pip install -U platformio
+        - rm -rf ./linux
+
+        #
+        # Libraries from PlatformIO Library Registry:
+        #
+        # http://platformio.org/lib/show/416/TinyGPS
+        - platformio lib -g install 416 421 422
+
+    script:
+        - platformio ci --lib="." --board=uno --board=teensy20pp $PLATFORMIO_CI_EXTRA_ARGS
+
+* Configuration file: https://github.com/ivankravets/Time/blob/master/.travis.yml
+* Build History: https://travis-ci.org/ivankravets/Time

docs/conf.py

@@ -45,7 +45,7 @@ master_doc = 'index'
 
 # General information about the project.
 project = u'PlatformIO'
-copyright = u'2014-2015, Ivan Kravets'
+copyright = u'2014-present, PlatformIO'
 
 # The version info for the project you're documenting, acts as replacement for
 # |version| and |release|, also used in various other places throughout the
@@ -69,7 +69,7 @@ release = platformio.__version__
 
 # List of patterns, relative to source directory, that match files and
 # directories to ignore when looking for source files.
-exclude_patterns = ['_build']
+exclude_patterns = ['_build', '**/*_extra.rst']
 
 # The reST default role (used for this markup: `text`) to use for all
 # documents.
@@ -119,12 +119,12 @@ html_theme = 'default'
 
 # The name of an image file (relative to this directory) to place at the top
 # of the sidebar.
-#html_logo = None
+#html_logo = '_static/platformio-logo.png'
 
 # The name of an image file (within the static path) to use as favicon of the
 # docs.  This file should be a Windows icon file (.ico) being 16x16 or 32x32
 # pixels large.
-#html_favicon = None
+html_favicon = '_static/favicon.ico'
 
 # Add any paths that contain custom static files (such as style sheets) here,
 # relative to this directory. They are copied after the builtin static files,
@@ -184,22 +184,22 @@ htmlhelp_basename = 'PlatformIOdoc'
 # -- Options for LaTeX output ---------------------------------------------
 
 latex_elements = {
-# The paper size ('letterpaper' or 'a4paper').
-#'papersize': 'letterpaper',
+    # The paper size ('letterpaper' or 'a4paper').
+    #'papersize': 'letterpaper',
 
-# The font size ('10pt', '11pt' or '12pt').
-#'pointsize': '10pt',
+    # The font size ('10pt', '11pt' or '12pt').
+    #'pointsize': '10pt',
 
-# Additional stuff for the LaTeX preamble.
-#'preamble': '',
+    # Additional stuff for the LaTeX preamble.
+    #'preamble': '',
 }
 
 # Grouping the document tree into LaTeX files. List of tuples
 # (source start file, target name, title,
 #  author, documentclass [howto, manual, or own class]).
 latex_documents = [
-  ('index', 'PlatformIO.tex', u'PlatformIO Documentation',
-   u'Ivan Kravets', 'manual'),
+    ('index', 'PlatformIO.tex', u'PlatformIO Documentation',
+     u'PlatformIO', 'manual'),
 ]
 
 # The name of an image file (relative to this directory) to place at the top of
@@ -229,7 +229,7 @@ latex_documents = [
 # (source start file, name, description, authors, manual section).
 man_pages = [
     ('index', 'platformio', u'PlatformIO Documentation',
-     [u'Ivan Kravets'], 1)
+     [u'PlatformIO'], 1)
 ]
 
 # If true, show URL addresses after external links.
@@ -242,9 +242,9 @@ man_pages = [
 # (source start file, target name, title, author,
 #  dir menu entry, description, category)
 texinfo_documents = [
-  ('index', 'PlatformIO', u'PlatformIO Documentation',
-   u'Ivan Kravets', 'PlatformIO', 'One line description of project.',
-   'Miscellaneous'),
+    ('index', 'PlatformIO', u'PlatformIO Documentation',
+     u'PlatformIO', 'PlatformIO', 'One line description of project.',
+     'Miscellaneous'),
 ]
 
 # Documents to append as an appendix to all manuals.

docs/demo.rst

@@ -0,0 +1,78 @@
+..  Copyright 2014-present PlatformIO <contact@platformio.org>
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+       http://www.apache.org/licenses/LICENSE-2.0
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+
+.. _demo:
+
+Demo & Projects
+===============
+
+.. contents::
+
+Project Examples
+----------------
+
+Pre-configured demo projects are located in `PlatformIO GitHub <https://github.com/platformio/platformio-examples/tree/develop>`_ repository.
+
+"Blink Project"
+---------------
+
+.. image:: _static/platformio-demo-wiring.gif
+
+Used in demo
+~~~~~~~~~~~~
+
+1. Source code of `Wiring Blink Example <https://github.com/platformio/platformio-examples/tree/develop/wiring-blink>`_
+2. :ref:`cmd_run` command
+3. :ref:`platformio run -t upload <cmd_run>` command.
+
+Platform Manager
+----------------
+
+.. image:: _static/platformio-demo-platforms.gif
+
+Used in demo
+~~~~~~~~~~~~
+
+1. :ref:`userguide_platform`
+2. :ref:`cmd_platform_list` command
+3. :ref:`platformio platform search avr <cmd_platform_search>` command
+4. :ref:`platformio platform show teensy <cmd_platform_show>` command
+5. :ref:`cmd_platform_update` command.
+
+Library Manager
+---------------
+
+.. image:: _static/platformio-demo-lib.gif
+
+Used in demo
+~~~~~~~~~~~~
+
+1. :ref:`cmd_lib`
+2. :ref:`platformio lib search 1-wire <cmd_lib_search>` command
+3. :ref:`platformio lib install 54 <cmd_lib_install>` command
+4. :ref:`platformio lib search -f mbed <cmd_lib_search>` command
+5. :ref:`platformio lib search -k rf <cmd_lib_search>` command
+6. :ref:`platformio lib search radiohead <cmd_lib_search>` command
+7. :ref:`platformio lib install 124 --version "1.40" <cmd_lib_install>` command
+8. :ref:`platformio lib show 124 <cmd_lib_show>` command
+9. :ref:`cmd_lib_update` command.
+
+Over-the-Air update for ESP8266
+-------------------------------
+
+.. image:: _static/platformio-demo-ota-esp8266.jpg
+    :target: https://www.youtube.com/watch?v=lXchL3hpDO4
+
+Used in demo
+~~~~~~~~~~~~
+
+1. :ref:`cmd_run` command
+2. :ref:`platformio run -t upload <cmd_run>` command.

docs/envvars.rst

@@ -1,3 +1,14 @@
+..  Copyright 2014-present PlatformIO <contact@platformio.org>
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+       http://www.apache.org/licenses/LICENSE-2.0
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+
 .. _envvars:
 
 Environment variables
@@ -18,119 +29,140 @@ General
 PlatformIO uses *General* environment variables for the common
 operations/commands.
 
-.. _envvar_CI:
-
-CI
-~~
+.. envvar:: CI
 
 PlatformIO handles ``CI`` variable which is setup by
 `Continuous Integration <http://en.wikipedia.org/wiki/Continuous_integration>`_
 (Travis, Circle and etc.) systems.
-Currently, PlatformIO uses it to disable prompts.
+PlatformIO uses it to disable prompts and progress bars. In other words,
+``CI=true`` automatically setup :envvar:`PLATFORMIO_DISABLE_PROGRESSBAR` to
+``true``.
 
-In other words, ``CI=true`` automatically setup
-:ref:`PLATFORMIO_SETTING_ENABLE_PROMPTS=false <envvar_PLATFORMIO_SETTING_ENABLE_PROMPTS>`.
+.. envvar:: PLATFORMIO_FORCE_COLOR
 
-.. _envvar_PLATFORMIO_HOME_DIR:
+Force to output color ANSI-codes even if the output is a ``pipe`` (not a ``tty``).
+The possible values are ``true`` and ``false``. Default is ``PLATFORMIO_FORCE_COLOR=false``.
 
-PLATFORMIO_HOME_DIR
-~~~~~~~~~~~~~~~~~~~
+.. envvar:: PLATFORMIO_DISABLE_PROGRESSBAR
+
+Disable progress bar for package/library downloader and uploader. This is
+useful when calling PlatformIO from subprocess and output is a ``pipe`` (not a ``tty``).
+The possible values are ``true`` and ``false``. Default is ``PLATFORMIO_DISABLE_PROGRESSBAR=false``.
+
+.. envvar:: PLATFORMIO_HOME_DIR
 
 Allows to override :ref:`projectconf` option :ref:`projectconf_pio_home_dir`.
 
-.. _envvar_PLATFORMIO_LIB_DIR:
-
-PLATFORMIO_LIB_DIR
-~~~~~~~~~~~~~~~~~~
+.. envvar:: PLATFORMIO_LIB_DIR
 
 Allows to override :ref:`projectconf` option :ref:`projectconf_pio_lib_dir`.
 
-.. _envvar_PLATFORMIO_SRC_DIR:
+.. envvar:: PLATFORMIO_LIBDEPS_DIR
 
-PLATFORMIO_SRC_DIR
-~~~~~~~~~~~~~~~~~~
+Allows to override :ref:`projectconf` option :ref:`projectconf_pio_libdeps_dir`.
+
+.. envvar:: PLATFORMIO_SRC_DIR
 
 Allows to override :ref:`projectconf` option :ref:`projectconf_pio_src_dir`.
 
-.. _envvar_PLATFORMIO_ENVS_DIR:
-
-PLATFORMIO_ENVS_DIR
-~~~~~~~~~~~~~~~~~~~
+.. envvar:: PLATFORMIO_ENVS_DIR
 
 Allows to override :ref:`projectconf` option :ref:`projectconf_pio_envs_dir`.
 
+.. envvar:: PLATFORMIO_DATA_DIR
 
-Builder
--------
+Allows to override :ref:`projectconf` option :ref:`projectconf_pio_data_dir`.
 
-.. _envvar_PLATFORMIO_BUILD_FLAGS:
+.. envvar:: PLATFORMIO_TEST_DIR
 
-PLATFORMIO_BUILD_FLAGS
-~~~~~~~~~~~~~~~~~~~~~~
+Allows to override :ref:`projectconf` option :ref:`projectconf_pio_test_dir`.
+
+
+Building
+--------
+
+.. envvar:: PLATFORMIO_BUILD_FLAGS
 
 Allows to set :ref:`projectconf` option :ref:`projectconf_build_flags`.
 
-.. _envvar_PLATFORMIO_SRC_BUILD_FLAGS:
+Examples:
 
-PLATFORMIO_SRC_BUILD_FLAGS
-~~~~~~~~~~~~~~~~~~~~~~~~~~
+.. code-block:: bash
+
+    # Unix:
+    export PLATFORMIO_BUILD_FLAGS=-DFOO
+    export PLATFORMIO_BUILD_FLAGS="-DFOO -DBAR=1 -DFLOAT_VALUE=1.23457e+07"
+    export PLATFORMIO_BUILD_FLAGS="'-DWIFI_PASS=\"My password\"' '-DWIFI_SSID=\"My ssid name\"'"
+
+    # Windows:
+    SET PLATFORMIO_BUILD_FLAGS=-DFOO
+    SET PLATFORMIO_BUILD_FLAGS=-DFOO -DBAR=1 -DFLOAT_VALUE=1.23457e+07
+    SET PLATFORMIO_BUILD_FLAGS='-DWIFI_PASS="My password"' '-DWIFI_SSID="My ssid name"'
+
+.. envvar:: PLATFORMIO_SRC_BUILD_FLAGS
 
 Allows to set :ref:`projectconf` option :ref:`projectconf_src_build_flags`.
 
-.. _envvar_PLATFORMIO_SRC_FILTER:
-
-PLATFORMIO_SRC_FILTER
-~~~~~~~~~~~~~~~~~~~~~
+.. envvar:: PLATFORMIO_SRC_FILTER
 
 Allows to set :ref:`projectconf` option :ref:`projectconf_src_filter`.
 
-.. _envvar_PLATFORMIO_EXTRA_SCRIPT:
-
-PLATFORMIO_EXTRA_SCRIPT
-~~~~~~~~~~~~~~~~~~~~~~~
+.. envvar:: PLATFORMIO_EXTRA_SCRIPT
 
 Allows to set :ref:`projectconf` option :ref:`projectconf_extra_script`.
 
+.. envvar:: PLATFORMIO_LIB_EXTRA_DIRS
+
+Allows to set :ref:`projectconf` option :ref:`projectconf_lib_extra_dirs`.
+
+
+Uploading
+---------
+
+.. envvar:: PLATFORMIO_UPLOAD_PORT
+
+Allows to set :ref:`projectconf` option :ref:`projectconf_upload_port`.
+
+.. envvar:: PLATFORMIO_UPLOAD_FLAGS
+
+Allows to set :ref:`projectconf` option :ref:`projectconf_upload_flags`.
+
+
 Settings
 --------
 
 Allows to override PlatformIO settings. You can manage them via
 :ref:`cmd_settings` command.
 
-
-PLATFORMIO_SETTING_AUTO_UPDATE_LIBRARIES
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.. envvar:: PLATFORMIO_SETTING_AUTO_UPDATE_LIBRARIES
 
 Allows to override setting :ref:`setting_auto_update_libraries`.
 
-PLATFORMIO_SETTING_AUTO_UPDATE_PLATFORMS
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.. envvar:: PLATFORMIO_SETTING_AUTO_UPDATE_PLATFORMS
 
 Allows to override setting :ref:`setting_auto_update_platforms`.
 
-PLATFORMIO_SETTING_CHECK_LIBRARIES_INTERVAL
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.. envvar:: PLATFORMIO_SETTING_CHECK_LIBRARIES_INTERVAL
 
 Allows to override setting :ref:`setting_check_libraries_interval`.
 
-PLATFORMIO_SETTING_CHECK_PLATFORMIO_INTERVAL
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.. envvar:: PLATFORMIO_SETTING_CHECK_PLATFORMIO_INTERVAL
 
 Allows to override setting :ref:`setting_check_platformio_interval`.
 
-PLATFORMIO_SETTING_CHECK_PLATFORMS_INTERVAL
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.. envvar:: PLATFORMIO_SETTING_CHECK_PLATFORMS_INTERVAL
 
 Allows to override setting :ref:`setting_check_platforms_interval`.
 
-.. _envvar_PLATFORMIO_SETTING_ENABLE_PROMPTS:
-
-PLATFORMIO_SETTING_ENABLE_PROMPTS
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Allows to override setting :ref:`setting_enable_prompts`.
-
-PLATFORMIO_SETTING_ENABLE_TELEMETRY
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.. envvar:: PLATFORMIO_SETTING_ENABLE_TELEMETRY
 
 Allows to override setting :ref:`setting_enable_telemetry`.
+
+.. envvar:: PLATFORMIO_SETTING_FORCE_VERBOSE
+
+Allows to override setting :ref:`setting_force_verbose`.
+
+
+.. envvar:: PLATFORMIO_SETTING_ENABLE_SSL
+
+Allows to override setting :ref:`setting_enable_ssl`.

docs/faq.rst

@@ -1,108 +1,164 @@
+..  Copyright 2014-present PlatformIO <contact@platformio.org>
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+       http://www.apache.org/licenses/LICENSE-2.0
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+
 .. _faq:
 
 Frequently Asked Questions
 ==========================
 
+.. note::
+   We have a big database with `Frequently Asked Questions in our Community Forums <https://community.platformio.org/c/faq>`_.
+   Please have a look at it.
+
 .. contents::
 
 General
 -------
 
-.. _faq_what_is_platformio:
-
 What is PlatformIO?
 ~~~~~~~~~~~~~~~~~~~
 
-`PlatformIO <http://platformio.org>`_ is a cross-platform code builder
-and the missing library manager.
+Please refer to :ref:`what_is_pio`
 
-PlatformIO is independent from the platform, in which it is running. In fact,
-the only requirement is Python, which exists pretty much everywhere. What this
-means is that PlatformIO projects can be easily moved from one computer to
-another, as well as that PlatformIO allows for the easy sharing of projects
-between team members, regardless of operating system they prefer to work with.
-Beyond that, PlatformIO can be run not only on commonly used desktops/laptops
-but also on the servers without X Window System. While PlatformIO itself is a
-console application, it can be used in combination with one's favorite
-:ref:`ide` or text editor such as :ref:`ide_arduino`, :ref:`ide_eclipse`,
-:ref:`ide_visualstudio`, :ref:`ide_vim`,  :ref:`ide_sublimetext`, etc.
+What is ``.pioenvs`` directory
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
-Alright, so PlatformIO can run on different operating systems. But more
-importantly, from development perspective at least, is a list of supported
-boards and MCUs. To keep things short: PlatformIO supports over 100
-:ref:`Embedded Boards <platforms>` and all major
-:ref:`Development Platforms <platforms>`.
+Please refer to :ref:`projectconf_pio_envs_dir`.
 
-PlatformIO allows users to:
+Command completion in Terminal
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
-* Decide which operation system they want to run development process on.
-  You can even use one OS at home and another at work.
-* Choose which editor to use for writing the code. It can be pretty simple
-  editor or powerful favorite :ref:`ide`.
-* Focus on the code development, significantly simplifying support for the
-  :ref:`platforms` and MCUs.
+Bash completion
+'''''''''''''''
 
+Bash completion support will complete subcommands and parameters. To enable
+Bash completion for `platformio` subcommands you need to put into your `.bashrc`:
 
-How does it work?
-~~~~~~~~~~~~~~~~~
+.. code-block:: bash
 
-Without going too deep into PlatformIO implementation details, work cycle of
-the project developed using PlatformIO is as follows:
+    eval "$(_PLATFORMIO_COMPLETE=source platformio)"
+    eval "$(_PLATFORMIO_COMPLETE=source pio)"
 
-* Users choose board(s) interested in :ref:`projectconf`
-* Based on this list of boards, PlatformIO downloads required toolchains and
-  installs them automatically.
-* Users develop code and PlatformIO makes sure that it is compiled, prepared
-  and uploaded to all the boards of interest.
+ZSH completion
+''''''''''''''
+
+To enable ``zsh`` completion please run these commands:
+
+.. code-block:: bash
+
+    autoload bashcompinit && bashcompinit
+    eval "$(_PLATFORMIO_COMPLETE=source platformio)"
+    eval "$(_PLATFORMIO_COMPLETE=source pio)"
+
+.. note::
+
+    For permanent command completion you need to place commands above to
+    ``~/.bashrc`` or ``~/.zshrc`` file.
+
+PlatformIO IDE
+--------------
+
+Please refer to :ref:`PlatformIO IDE Frequently Asked Questions <ide_atom_faq>`.
+
+Before/Pre and After/Post build actions
+---------------------------------------
+
+PlatformIO Build System has rich API that allows to attach different pre-/post
+actions (hooks). See features of :ref:`projectconf_extra_script` option for
+:ref:`projectconf`.
 
 .. _faq_troubleshooting:
 
 Troubleshooting
 ---------------
 
-.. _faq_troubleshooting_pioblocksprompt:
+Installation
+~~~~~~~~~~~~
 
-PlatformIO blocks command execution using user prompt
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+[Errno 1] Operation not permitted
+'''''''''''''''''''''''''''''''''
 
-If you are going to run *PlatformIO* from **subprocess**, you **MUST
-DISABLE** all prompts. It will allow you to avoid blocking.
-There are a few options:
+Answered in `issue #295 <https://github.com/platformio/platformio/issues/295#issuecomment-143772005>`_.
 
-- using :option:`platformio --force` option before each command
-- using environment variable :ref:`PLATFORMIO_SETTING_ENABLE_PROMPTS=No <envvar_PLATFORMIO_SETTING_ENABLE_PROMPTS>`
-- disable global setting ``enable_prompts`` via :ref:`cmd_settings` command
-- masking under Continuous Integration system via environment variable
-  :ref:`CI=true <envvar_CI>`.
+Windows AttributeError: 'module' object has no attribute 'packages'
+'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
 
+Answered in `issue #252 <https://github.com/platformio/platformio/issues/252#issuecomment-127072039>`_.
 
-Windows: ``UnicodeDecodeError: 'ascii' codec can't decode byte``
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.. _faq_troubleshooting_pionotfoundinpath:
+
+Program "platformio" not found in PATH
+''''''''''''''''''''''''''''''''''''''
+
+Where is ``platformio`` binary installed? Run this command in Terminal
+
+.. code-block:: bash
+
+    # for Unix
+    which platformio
+    echo $PATH
+ Windows OS
+    where platformio
+    echo %PATH%
+
+For example, ``which platformio`` is equal to ``/usr/local/bin/platformio``,
+then `PATH (wiki) <https://en.wikipedia.org/wiki/PATH_(variable)>`_
+should contain ``/usr/local/bin`` directory.
+
+**Unix Users**: You can make "symlinks" from ``platformio`` program to the
+``bin`` directory which is included in ``$PATH``. For example,
+see `issue #272 <https://github.com/platformio/platformio/issues/272#issuecomment-133626112>`_.
+
+Windows UnicodeDecodeError: 'ascii' codec can't decode byte
+'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
 
 Answered in `issue #143 <https://github.com/platformio/platformio/issues/143#issuecomment-88060906>`_.
 
-Serial does not work with panStampAVR board
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Answered in `issue #144 <https://github.com/platformio/platformio/issues/144#issuecomment-87388038>`_.
-
-
-PlatformIO: command not found || An error ``pkg_resources.DistributionNotFound``
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+PlatformIO: command not found || An error "pkg_resources.DistributionNotFound"
+''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
 
 Please upgrade *SetupTools* package:
 
 .. code-block:: bash
 
-    $ [sudo] pip uninstall setuptools
-    $ [sudo] pip install setuptools
+    [sudo] pip uninstall setuptools
+    [sudo] pip install setuptools
 
     # Then re-install PlatformIO
-    $ [sudo] pip uninstall platformio
-    $ [sudo] pip install platformio
+    [sudo] pip uninstall platformio
+    [sudo] pip install platformio
 
-ARM toolchain: ``cc1plus: error while loading shared libraries``
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Miscellaneous
+~~~~~~~~~~~~~
+
+Serial does not work with panStampAVR board
+'''''''''''''''''''''''''''''''''''''''''''
+
+Answered in `issue #144 <https://github.com/platformio/platformio/issues/144#issuecomment-87388038>`_.
+
+Building
+~~~~~~~~
+
+ARM toolchain: cc1plus: error while loading shared libraries
+''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
 
 See related answers for
 `error while loading shared libraries <https://github.com/platformio/platformio/issues?utf8=✓&q=error+while+loading+shared+libraries>`_.
+
+Archlinux: libncurses.so.5: cannot open shared object file
+''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
+
+Answered in `issue #291 <https://github.com/platformio/platformio/issues/291>`_.
+
+Monitoring a serial port breaks upload
+''''''''''''''''''''''''''''''''''''''
+
+Answered in `issue #384 <https://github.com/platformio/platformio/issues/384>`_.

docs/frameworks/cmsis.rst

@@ -1,3 +1,14 @@
+..  Copyright 2014-present PlatformIO <contact@platformio.org>
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+       http://www.apache.org/licenses/LICENSE-2.0
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+
 .. _framework_cmsis:
 
 Framework ``cmsis``
@@ -24,7 +35,7 @@ Boards
 
 .. note::
     * You can list pre-configured boards by :ref:`cmd_boards` command or
-      `PlatformIO Boards Explorer <http://platformio.org/#!/boards>`_
+      `PlatformIO Boards Explorer <http://platformio.org/boards>`_
     * For more detailed ``board`` information please scroll tables below by horizontal.
 
 Armstrap
@@ -94,3 +105,12 @@ ST
       - 32 MHz
       - 128 Kb
       - 16 Kb
+
+    * - ``nucleo_f401re``
+      - `ST Nucleo F401RE <https://developer.mbed.org/platforms/ST-Nucleo-F401RE/>`_
+      - STM32F401RET6
+      - 84 MHz
+      - 512 Kb
+      - 96 Kb
+
+.. include:: cmsis_extra.rst

docs/frameworks/cmsis_extra.rst

@@ -0,0 +1,25 @@
+..  Copyright 2014-present PlatformIO <contact@platformio.org>
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+       http://www.apache.org/licenses/LICENSE-2.0
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+
+Articles
+--------
+
+* Jan 11, 2016 - **David Mills, Ph.D.** - `STM NUCLEOF401RE TIMER IO <http://webshed.org/wiki/STM_NUCLEOF401RE_TIMER_IO>`_
+
+See more :ref:`articles`.
+
+Examples
+--------
+
+All project examples are located in PlatformIO repository
+`Examples for CMSIS framework <https://github.com/platformio/platformio-examples/tree/develop/stm32>`_.
+
+* `Blink <https://github.com/platformio/platformio-examples/tree/develop/stm32/stm32-cmsis-blink>`_

docs/frameworks/energia.rst

@@ -1,8 +1,19 @@
+..  Copyright 2014-present PlatformIO <contact@platformio.org>
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+       http://www.apache.org/licenses/LICENSE-2.0
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+
 .. _framework_energia:
 
 Framework ``energia``
 =====================
-Energia framework enables pretty much anyone to start easily creating microcontroller-based projects and applications. Its easy-to-use libraries and functions provide developers of all experience levels to start blinking LEDs, buzzing buzzers and sensing sensors more quickly than ever before.
+Energia Wiring-based framework enables pretty much anyone to start easily creating microcontroller-based projects and applications. Its easy-to-use libraries and functions provide developers of all experience levels to start blinking LEDs, buzzing buzzers and sensing sensors more quickly than ever before.
 
 For more detailed information please visit `vendor site <http://energia.nu/reference/>`_.
 
@@ -27,7 +38,7 @@ Boards
 
 .. note::
     * You can list pre-configured boards by :ref:`cmd_boards` command or
-      `PlatformIO Boards Explorer <http://platformio.org/#!/boards>`_
+      `PlatformIO Boards Explorer <http://platformio.org/boards>`_
     * For more detailed ``board`` information please scroll tables below by horizontal.
 
 TI
@@ -64,6 +75,13 @@ TI
       - 128 Kb
       - 1 Kb
 
+    * - ``lpmsp430fr4133``
+      - `TI LaunchPad w/ msp430fr4133 <http://www.ti.com/tool/msp-exp430fr4133>`_
+      - MSP430FR4133
+      - 16 MHz
+      - 16 Kb
+      - 2 Kb
+
     * - ``lpmsp430fr5739``
       - `TI FraunchPad w/ msp430fr5739 <http://www.ti.com/tool/msp-exp430fr5739>`_
       - MSP430FR5739
@@ -78,6 +96,13 @@ TI
       - 64 Kb
       - 1 Kb
 
+    * - ``lpmsp430fr6989``
+      - `TI LaunchPad w/ msp430fr6989 <http://www.ti.com/tool/msp-exp430fr6989>`_
+      - MSP430FR6989
+      - 16 MHz
+      - 128 Kb
+      - 2 Kb
+
     * - ``lpmsp430g2231``
       - `TI LaunchPad w/ msp430g2231 (1 MHz) <http://www.ti.com/ww/en/launchpad/launchpads-msp430-msp-exp430g2.html>`_
       - MSP430G2231

docs/frameworks/index.rst

@@ -1,3 +1,14 @@
+..  Copyright 2014-present PlatformIO <contact@platformio.org>
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+       http://www.apache.org/licenses/LICENSE-2.0
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+
 .. _frameworks:
 
 Frameworks
@@ -11,4 +22,6 @@ Frameworks
     energia
     libopencm3
     mbed
+    simba
     spl
+    wiringpi

docs/frameworks/libopencm3.rst

@@ -1,3 +1,14 @@
+..  Copyright 2014-present PlatformIO <contact@platformio.org>
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+       http://www.apache.org/licenses/LICENSE-2.0
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+
 .. _framework_libopencm3:
 
 Framework ``libopencm3``
@@ -27,7 +38,7 @@ Boards
 
 .. note::
     * You can list pre-configured boards by :ref:`cmd_boards` command or
-      `PlatformIO Boards Explorer <http://platformio.org/#!/boards>`_
+      `PlatformIO Boards Explorer <http://platformio.org/boards>`_
     * For more detailed ``board`` information please scroll tables below by horizontal.
 
 ST
@@ -64,6 +75,13 @@ ST
       - 128 Kb
       - 16 Kb
 
+    * - ``nucleo_f103rb``
+      - `ST Nucleo F103RB <https://developer.mbed.org/platforms/ST-Nucleo-F103RB/>`_
+      - STM32F103RBT6
+      - 72 MHz
+      - 128 Kb
+      - 20 Kb
+
 TI
 ~~
 
@@ -97,3 +115,5 @@ TI
       - 120 MHz
       - 1024 Kb
       - 256 Kb
+
+.. include:: libopencm3_extra.rst

docs/frameworks/libopencm3_extra.rst

@@ -0,0 +1,18 @@
+..  Copyright 2014-present PlatformIO <contact@platformio.org>
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+       http://www.apache.org/licenses/LICENSE-2.0
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+
+Examples
+--------
+
+All project examples are located in PlatformIO repository
+`Examples for libOpenCM3 framework <https://github.com/platformio/platformio-examples/tree/develop/stm32>`_.
+
+* `Blink <https://github.com/platformio/platformio-examples/tree/develop/stm32/stm32-opencm3-blink>`_

docs/frameworks/mbed.rst

@@ -1,3 +1,14 @@
+..  Copyright 2014-present PlatformIO <contact@platformio.org>
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+       http://www.apache.org/licenses/LICENSE-2.0
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+
 .. _framework_mbed:
 
 Framework ``mbed``
@@ -16,6 +27,9 @@ Platforms
     * - Name
       - Description
 
+    * - :ref:`platform_atmelsam`
+      - Atmel | SMART offers Flash- based ARM products based on the ARM Cortex-M0+, Cortex-M3 and Cortex-M4 architectures, ranging from 8KB to 2MB of Flash including a rich peripheral and feature mix.
+
     * - :ref:`platform_freescalekinetis`
       - Freescale Kinetis Microcontrollers is family of multiple hardware- and software-compatible ARM Cortex-M0+, Cortex-M4 and Cortex-M7-based MCU series. Kinetis MCUs offer exceptional low-power performance, scalability and feature integration.
 
@@ -31,14 +45,91 @@ Platforms
     * - :ref:`platform_ststm32`
       - The STM32 family of 32-bit Flash MCUs based on the ARM Cortex-M processor is designed to offer new degrees of freedom to MCU users. It offers a 32-bit product range that combines very high performance, real-time capabilities, digital signal processing, and low-power, low-voltage operation, while maintaining full integration and ease of development.
 
+    * - :ref:`platform_teensy`
+      - Teensy is a complete USB-based microcontroller development system, in a very small footprint, capable of implementing many types of projects. All programming is done via the USB port. No special programmer is needed, only a standard USB cable and a PC or Macintosh with a USB port.
+
 Boards
 ------
 
 .. note::
     * You can list pre-configured boards by :ref:`cmd_boards` command or
-      `PlatformIO Boards Explorer <http://platformio.org/#!/boards>`_
+      `PlatformIO Boards Explorer <http://platformio.org/boards>`_
     * For more detailed ``board`` information please scroll tables below by horizontal.
 
+96Boards
+~~~~~~~~
+
+.. list-table::
+    :header-rows:  1
+
+    * - Type ``board``
+      - Name
+      - Microcontroller
+      - Frequency
+      - Flash
+      - RAM
+
+    * - ``b96b_f446ve``
+      - `96Boards B96B-F446VE <https://developer.mbed.org/platforms/ST-B96B-F446VE/>`_
+      - STM32F446VET6
+      - 168 MHz
+      - 512 Kb
+      - 128 Kb
+
+Atmel
+~~~~~
+
+.. list-table::
+    :header-rows:  1
+
+    * - Type ``board``
+      - Name
+      - Microcontroller
+      - Frequency
+      - Flash
+      - RAM
+
+    * - ``samd21_xpro``
+      - `Atmel SAMD21-XPRO <https://developer.mbed.org/platforms/SAMD21-XPRO/>`_
+      - ATSAMD21J18A
+      - 48 MHz
+      - 256 Kb
+      - 32 Kb
+
+    * - ``saml21_xpro_b``
+      - `Atmel SAML21-XPRO-B <https://developer.mbed.org/platforms/SAML21-XPRO/>`_
+      - ATSAML21J18B
+      - 48 MHz
+      - 256 Kb
+      - 32 Kb
+
+    * - ``samr21_xpro``
+      - `Atmel ATSAMR21-XPRO <https://developer.mbed.org/platforms/SAMR21-XPRO/>`_
+      - ATSAMR21G18A
+      - 48 MHz
+      - 256 Kb
+      - 32 Kb
+
+BBC
+~~~
+
+.. list-table::
+    :header-rows:  1
+
+    * - Type ``board``
+      - Name
+      - Microcontroller
+      - Frequency
+      - Flash
+      - RAM
+
+    * - ``bbcmicrobit``
+      - `BBC micro:bit <https://developer.mbed.org/platforms/Microbit/>`_
+      - NRF51822
+      - 16 MHz
+      - 256 Kb
+      - 16 Kb
+
 CQ Publishing
 ~~~~~~~~~~~~~
 
@@ -79,6 +170,26 @@ Delta
       - 256 Kb
       - 32 Kb
 
+Elektor Labs
+~~~~~~~~~~~~
+
+.. list-table::
+    :header-rows:  1
+
+    * - Type ``board``
+      - Name
+      - Microcontroller
+      - Frequency
+      - Flash
+      - RAM
+
+    * - ``elektor_cocorico``
+      - `CoCo-ri-Co! <https://developer.mbed.org/platforms/CoCo-ri-Co/>`_
+      - LPC812
+      - 30 MHz
+      - 16 Kb
+      - 4 Kb
+
 Embedded Artists
 ~~~~~~~~~~~~~~~~
 
@@ -93,7 +204,7 @@ Embedded Artists
       - RAM
 
     * - ``lpc11u35``
-      - `Embedded Artists LPC11U35 QuickStart Board <https://developer.mbed.org/platforms/EA-LPC11U35/>`_
+      - `EA LPC11U35 QuickStart Board <https://developer.mbed.org/platforms/EA-LPC11U35/>`_
       - LPC11U35
       - 48 MHz
       - 64 Kb
@@ -168,6 +279,27 @@ Freescale
       - 128 Kb
       - 16 Kb
 
+    * - ``frdm_kl26z``
+      - `Freescale Kinetis FRDM-KL26Z <http://www.nxp.com/products/software-and-tools/hardware-development-tools/freedom-development-boards/freedom-development-platform-for-kinetis-kl16-and-kl26-mcus-up-to-128-kb-flash:FRDM-KL26Z>`_
+      - MKL26Z128VLH4
+      - 48 MHz
+      - 128 Kb
+      - 16 Kb
+
+    * - ``frdm_kl27z``
+      - `Freescale Kinetis FRDM-KL27Z <http://www.nxp.com/products/software-and-tools/hardware-development-tools/freedom-development-boards/freedom-development-platform-for-kinetis-kl17-and-kl27-mcus:FRDM-KL27Z>`_
+      - MKL27Z64VLH4
+      - 48 MHz
+      - 64 Kb
+      - 16 Kb
+
+    * - ``frdm_kl43z``
+      - `Freescale Kinetis FRDM-KL43Z <http://www.nxp.com/products/software-and-tools/hardware-development-tools/freedom-development-boards/freedom-development-platform-for-kinetis-kl43-kl33-kl27-kl17-and-kl13-mcus:FRDM-KL43Z>`_
+      - MKL43Z256VLH4
+      - 48 MHz
+      - 256 Kb
+      - 32 Kb
+
     * - ``frdm_kl46z``
       - `Freescale Kinetis FRDM-KL46Z <https://developer.mbed.org/platforms/FRDM-KL46Z/>`_
       - MKL46Z256VLL4
@@ -175,6 +307,46 @@ Freescale
       - 256 Kb
       - 32 Kb
 
+GHI Electronics
+~~~~~~~~~~~~~~~
+
+.. list-table::
+    :header-rows:  1
+
+    * - Type ``board``
+      - Name
+      - Microcontroller
+      - Frequency
+      - Flash
+      - RAM
+
+    * - ``oc_mbuino``
+      - `mBuino <https://developer.mbed.org/platforms/mBuino/>`_
+      - LPC11U24
+      - 50 MHz
+      - 32 Kb
+      - 10 Kb
+
+Generic
+~~~~~~~
+
+.. list-table::
+    :header-rows:  1
+
+    * - Type ``board``
+      - Name
+      - Microcontroller
+      - Frequency
+      - Flash
+      - RAM
+
+    * - ``bluepill_f103c8``
+      - `BluePill F103C8 <http://www.st.com/content/st_com/en/products/microcontrollers/stm32-32-bit-arm-cortex-mcus/stm32f1-series/stm32f103/stm32f103c8.html>`_
+      - STM32F103C8T6
+      - 72 MHz
+      - 64 Kb
+      - 20 Kb
+
 JKSoft
 ~~~~~~
 
@@ -188,13 +360,80 @@ JKSoft
       - Flash
       - RAM
 
-    * - ``wallBotBLE``
+    * - ``wallbot_ble``
       - `JKSoft Wallbot BLE <https://developer.mbed.org/platforms/JKSoft-Wallbot-BLE/>`_
       - NRF51822
       - 16 MHz
       - 128 Kb
       - 16 Kb
 
+Micromint
+~~~~~~~~~
+
+.. list-table::
+    :header-rows:  1
+
+    * - Type ``board``
+      - Name
+      - Microcontroller
+      - Frequency
+      - Flash
+      - RAM
+
+    * - ``lpc4330_m4``
+      - `Bambino-210E <https://developer.mbed.org/platforms/Micromint-Bambino-210E/>`_
+      - LPC4330
+      - 204 MHz
+      - 8192 Kb
+      - 264 Kb
+
+MikroElektronika
+~~~~~~~~~~~~~~~~
+
+.. list-table::
+    :header-rows:  1
+
+    * - Type ``board``
+      - Name
+      - Microcontroller
+      - Frequency
+      - Flash
+      - RAM
+
+    * - ``hexiwear``
+      - `Hexiwear <https://developer.mbed.org/platforms/Hexiwear/>`_
+      - MK64FN1M0VDC12
+      - 120 MHz
+      - 1024 Kb
+      - 256 Kb
+
+MultiTech
+~~~~~~~~~
+
+.. list-table::
+    :header-rows:  1
+
+    * - Type ``board``
+      - Name
+      - Microcontroller
+      - Frequency
+      - Flash
+      - RAM
+
+    * - ``mts_mdot_f405rg``
+      - `MultiTech mDot <https://developer.mbed.org/platforms/MTS-mDot-F411/>`_
+      - STM32F411RET6
+      - 100 MHz
+      - 512 Kb
+      - 128 Kb
+
+    * - ``mts_mdot_f411re``
+      - `MultiTech mDot F411 <https://developer.mbed.org/platforms/MTS-mDot-F411/>`_
+      - STM32F411RET6
+      - 100 MHz
+      - 512 Kb
+      - 128 Kb
+
 NGX Technologies
 ~~~~~~~~~~~~~~~~
 
@@ -228,6 +467,13 @@ NXP
       - Flash
       - RAM
 
+    * - ``lpc11c24``
+      - `NXP LPC11C24 <http://www.nxp.com/products/microcontrollers-and-processors/arm-processors/lpc-cortex-m-mcus/lpc-cortex-m0-plus-m0/lpc1100-cortex-m0-plus-m0/scalable-entry-level-32-bit-microcontroller-mcu-based-on-arm-cortex-m0-plus-m0-cores:LPC11C24FBD48>`_
+      - LPC11C24
+      - 48 MHz
+      - 32 Kb
+      - 8 Kb
+
     * - ``lpc11u24``
       - `NXP mbed LPC11U24 <https://developer.mbed.org/platforms/mbed-LPC11U24/>`_
       - LPC11U24
@@ -235,6 +481,34 @@ NXP
       - 32 Kb
       - 8 Kb
 
+    * - ``lpc11u24_301``
+      - `ARM mbed LPC11U24 (+CAN) <https://developer.mbed.org/handbook/mbed-NXP-LPC11U24>`_
+      - LPC11U24
+      - 48 MHz
+      - 32 Kb
+      - 8 Kb
+
+    * - ``lpc11u34_421``
+      - `NXP LPC11U34 <http://www.nxp.com/products/microcontrollers-and-processors/arm-processors/lpc-cortex-m-mcus/lpc-cortex-m0-plus-m0/lpc1100-cortex-m0-plus-m0/40kb-flash-8kb-sram-lqfp48-package:LPC11U34FBD48?lang_cd=en>`_
+      - LPC11U34
+      - 48 MHz
+      - 64 Kb
+      - 8 Kb
+
+    * - ``lpc11u37_501``
+      - `NXP LPC11U37 <http://www.nxp.com/products/microcontrollers-and-processors/arm-processors/lpc-cortex-m-mcus/lpc-cortex-m0-plus-m0/lpc1100-cortex-m0-plus-m0/128kb-flash-10kb-sram-lqfp48-package:LPC11U37FBD48?lang_cd=en>`_
+      - LPC11U37
+      - 48 MHz
+      - 128 Kb
+      - 10 Kb
+
+    * - ``lpc11u68``
+      - `LPCXpresso11U68 <https://developer.mbed.org/platforms/LPCXpresso11U68/>`_
+      - LPC11U68
+      - 50 MHz
+      - 256 Kb
+      - 36 Kb
+
     * - ``lpc1549``
       - `NXP LPCXpresso1549 <https://developer.mbed.org/platforms/LPCXpresso1549/>`_
       - LPC1549
@@ -247,7 +521,42 @@ NXP
       - LPC1768
       - 96 MHz
       - 512 Kb
+      - 64 Kb
+
+    * - ``lpc2368``
+      - `NXP LPC2368 <https://developer.mbed.org/platforms/mbed-LPC2368/>`_
+      - LPC2368
+      - 72 MHz
+      - 512 Kb
+      - 58 Kb
+
+    * - ``lpc2460``
+      - `NXP LPC2460 <http://www.nxp.com/products/microcontrollers-and-processors/arm-processors/lpc-arm7-arm9-mcus/lpc-arm7-mcus/lpc2100-200-300-400/flashless-16-bit-32-bit-microcontroller-ethernet-can-isp-iap-usb-2.0-device-host-otg-external-memory-interface:LPC2460FBD208>`_
+      - LPC2460
+      - 72 MHz
+      - 64 Kb
+      - 16 Kb
+
+    * - ``lpc812``
+      - `NXP LPC800-MAX <https://developer.mbed.org/platforms/NXP-LPC800-MAX/>`_
+      - LPC812
+      - 30 MHz
+      - 16 Kb
+      - 4 Kb
+
+    * - ``lpc824``
+      - `LPCXpresso824-MAX <https://developer.mbed.org/platforms/LPCXpresso824-MAX/>`_
+      - LPC824
+      - 30 MHz
       - 32 Kb
+      - 8 Kb
+
+    * - ``micronfcboard``
+      - `MicroNFCBoard <https://developer.mbed.org/platforms/MicroNFCBoard/>`_
+      - LPC11U34
+      - 48 MHz
+      - 64 Kb
+      - 10 Kb
 
 Nordic
 ~~~~~~
@@ -392,6 +701,20 @@ ST
       - 2048 Kb
       - 256 Kb
 
+    * - ``disco_f469ni``
+      - `ST 32F469IDISCOVERY <http://www.st.com/web/catalog/tools/FM116/CL1620/SC959/SS1532/LN1848/PF262395>`_
+      - STM32F469NIH6
+      - 180 MHz
+      - 1024 Kb
+      - 384 Kb
+
+    * - ``disco_f746ng``
+      - `ST 32F746GDISCOVERY <http://www.st.com/content/st_com/en/products/evaluation-tools/product-evaluation-tools/mcu-eval-tools/stm32-mcu-eval-tools/stm32-mcu-discovery-kits/32f746gdiscovery.html>`_
+      - STM32F746NGH6
+      - 216 MHz
+      - 1024 Kb
+      - 320 Kb
+
     * - ``disco_l053c8``
       - `ST 32L0538DISCOVERY <http://www.st.com/web/en/catalog/tools/PF260319>`_
       - STM32L053C8T6
@@ -399,6 +722,13 @@ ST
       - 64 Kb
       - 8 Kb
 
+    * - ``disco_l476vg``
+      - `ST 32L476GDISCOVERY <http://www.st.com/web/catalog/tools/FM116/CL1620/SC959/SS1532/LN1848/PF261635>`_
+      - STM32L476VGT6
+      - 80 MHz
+      - 1024 Kb
+      - 128 Kb
+
     * - ``nucleo_f030r8``
       - `ST Nucleo F030R8 <https://developer.mbed.org/platforms/ST-Nucleo-F030R8/>`_
       - STM32F030R8T6
@@ -406,6 +736,20 @@ ST
       - 64 Kb
       - 8 Kb
 
+    * - ``nucleo_f031k6``
+      - `ST Nucleo F031K6 <https://developer.mbed.org/platforms/ST-Nucleo-F031K6/>`_
+      - STM32F031K6T6
+      - 48 MHz
+      - 32 Kb
+      - 4 Kb
+
+    * - ``nucleo_f042k6``
+      - `ST Nucleo F042K6 <https://developer.mbed.org/platforms/ST-Nucleo-F042K6/>`_
+      - STM32F042K6T6
+      - 48 MHz
+      - 32 Kb
+      - 6 Kb
+
     * - ``nucleo_f070rb``
       - `ST Nucleo F070RB <https://developer.mbed.org/platforms/ST-Nucleo-F070RB/>`_
       - STM32F070RBT6
@@ -434,6 +778,13 @@ ST
       - 128 Kb
       - 20 Kb
 
+    * - ``nucleo_f207zg``
+      - `ST Nucleo F207ZG <https://developer.mbed.org/platforms/ST-Nucleo-F207ZG/>`_
+      - STM32F207ZGT6
+      - 120 MHz
+      - 1024 Kb
+      - 128 Kb
+
     * - ``nucleo_f302r8``
       - `ST Nucleo F302R8 <https://developer.mbed.org/platforms/ST-Nucleo-F302R8/>`_
       - STM32F302R8T6
@@ -441,6 +792,13 @@ ST
       - 64 Kb
       - 16 Kb
 
+    * - ``nucleo_f303k8``
+      - `ST Nucleo F303K8 <https://developer.mbed.org/platforms/ST-Nucleo-F303K8/>`_
+      - STM32F303K8T6
+      - 72 MHz
+      - 64 Kb
+      - 16 Kb
+
     * - ``nucleo_f303re``
       - `ST Nucleo F303RE <http://developer.mbed.org/platforms/ST-Nucleo-F303RE/>`_
       - STM32F303RET6
@@ -462,6 +820,13 @@ ST
       - 512 Kb
       - 96 Kb
 
+    * - ``nucleo_f410rb``
+      - `ST Nucleo F410RB <https://developer.mbed.org/platforms/ST-Nucleo-F410RB/>`_
+      - STM32F410RBT6
+      - 100 MHz
+      - 128 Kb
+      - 32 Kb
+
     * - ``nucleo_f411re``
       - `ST Nucleo F411RE <https://developer.mbed.org/platforms/ST-Nucleo-F411RE/>`_
       - STM32F411RET6
@@ -469,6 +834,55 @@ ST
       - 512 Kb
       - 128 Kb
 
+    * - ``nucleo_f429zi``
+      - `ST Nucleo F429ZI <https://developer.mbed.org/platforms/ST-Nucleo-F429ZI/>`_
+      - STM32F429ZIT6
+      - 180 MHz
+      - 2048 Kb
+      - 256 Kb
+
+    * - ``nucleo_f446re``
+      - `ST Nucleo F446RE <https://developer.mbed.org/platforms/ST-Nucleo-F446RE/>`_
+      - STM32F446RET6
+      - 180 MHz
+      - 512 Kb
+      - 128 Kb
+
+    * - ``nucleo_f446ze``
+      - `ST Nucleo F446ZE <https://developer.mbed.org/platforms/ST-Nucleo-F446ZE/>`_
+      - STM32F446ZET6
+      - 180 MHz
+      - 512 Kb
+      - 128 Kb
+
+    * - ``nucleo_f746zg``
+      - `ST Nucleo F746ZG <https://developer.mbed.org/platforms/ST-Nucleo-F446ZE/>`_
+      - STM32F746ZGT6
+      - 216 MHz
+      - 1024 Kb
+      - 320 Kb
+
+    * - ``nucleo_f767zi``
+      - `ST Nucleo F767ZI <https://developer.mbed.org/platforms/ST-Nucleo-F767ZI/>`_
+      - STM32F746ZGT6
+      - 216 MHz
+      - 2048 Kb
+      - 512 Kb
+
+    * - ``nucleo_l011k4``
+      - `ST Nucleo L011K4 <https://developer.mbed.org/platforms/ST-Nucleo-L011K4/>`_
+      - STM32L011K4T6
+      - 32 MHz
+      - 16 Kb
+      - 2 Kb
+
+    * - ``nucleo_l031k6``
+      - `ST Nucleo L031K6 <https://developer.mbed.org/platforms/ST-Nucleo-L031K6/>`_
+      - STM32L031K6T6
+      - 32 MHz
+      - 32 Kb
+      - 8 Kb
+
     * - ``nucleo_l053r8``
       - `ST Nucleo L053R8 <https://developer.mbed.org/platforms/ST-Nucleo-L053R8/>`_
       - STM32L053R8T6
@@ -476,6 +890,13 @@ ST
       - 64 Kb
       - 8 Kb
 
+    * - ``nucleo_l073rz``
+      - `ST Nucleo L073RZ <https://developer.mbed.org/platforms/ST-Nucleo-L073RZ/>`_
+      - STM32L073RZ
+      - 32 MHz
+      - 192 Kb
+      - 20 Kb
+
     * - ``nucleo_l152re``
       - `ST Nucleo L152RE <https://developer.mbed.org/platforms/ST-Nucleo-L152RE/>`_
       - STM32L152RET6
@@ -483,6 +904,20 @@ ST
       - 512 Kb
       - 80 Kb
 
+    * - ``nucleo_l432kc``
+      - `ST Nucleo L432KC <https://developer.mbed.org/platforms/ST-Nucleo-L432KC/>`_
+      - STM32L432KCU6
+      - 80 MHz
+      - 256 Kb
+      - 64 Kb
+
+    * - ``nucleo_l476rg``
+      - `ST Nucleo L476RG <https://developer.mbed.org/platforms/ST-Nucleo-L476RG/>`_
+      - STM32L476RGT6
+      - 80 MHz
+      - 1024 Kb
+      - 128 Kb
+
 SeeedStudio
 ~~~~~~~~~~~
 
@@ -496,19 +931,54 @@ SeeedStudio
       - Flash
       - RAM
 
-    * - ``seeedTinyBLE``
-      - `SeeedStudio Seeed Tiny BLE <http://developer.mbed.org/platforms/Seeed-Tiny-BLE/>`_
+    * - ``seeedArchBLE``
+      - `Seeed Arch BLE <https://developer.mbed.org/platforms/Seeed-Arch-BLE/>`_
+      - NRF51822
+      - 16 MHz
+      - 128 Kb
+      - 16 Kb
+
+    * - ``seeedArchGPRS``
+      - `Seeed Arch GPRS V2 <https://www.seeedstudio.com/Arch-GPRS-V2-p-2026.html>`_
+      - LPC11U37
+      - 48 MHz
+      - 128 Kb
+      - 10 Kb
+
+    * - ``seeedArchLink``
+      - `Seeed Arch Link <https://developer.mbed.org/platforms/Seeed-Arch-Link/>`_
       - NRF51822
       - 16 MHz
       - 256 Kb
       - 16 Kb
 
-    * - ``seeeduinoArchPro``
-      - `SeeedStudio Seeeduino-Arch-Pro <https://developer.mbed.org/platforms/Seeeduino-Arch-Pro/>`_
+    * - ``seeedArchMax``
+      - `Seeed Arch Max <https://developer.mbed.org/platforms/Seeed-Arch-Max/>`_
+      - STM32F407VET6
+      - 168 MHz
+      - 512 Kb
+      - 192 Kb
+
+    * - ``seeedArchPro``
+      - `Seeed Arch Pro <https://developer.mbed.org/platforms/Seeeduino-Arch-Pro/>`_
       - LPC1768
       - 96 MHz
       - 512 Kb
-      - 32 Kb
+      - 64 Kb
+
+    * - ``seeedTinyBLE``
+      - `Seeed Tiny BLE <http://developer.mbed.org/platforms/Seeed-Tiny-BLE/>`_
+      - NRF51822
+      - 16 MHz
+      - 256 Kb
+      - 16 Kb
+
+    * - ``xadow_m0``
+      - `Seeed Xadow M0 <https://developer.mbed.org/platforms/Seeed-Xadow-M0/>`_
+      - LPC11U35
+      - 48 MHz
+      - 64 Kb
+      - 10 Kb
 
 Silicon Labs
 ~~~~~~~~~~~~
@@ -544,6 +1014,13 @@ Silicon Labs
       - 256 Kb
       - 32 Kb
 
+    * - ``efm32pg_stk3401``
+      - `Silicon Labs SLSTK3401A (Pearl Gecko) <https://developer.mbed.org/platforms/EFM32-Pearl-Gecko/>`_
+      - EFM32PG1B200F256
+      - 40 MHz
+      - 256 Kb
+      - 32 Kb
+
     * - ``efm32wg_stk3800``
       - `Silicon Labs EFM32WG-STK3800 (Wonder Gecko) <https://developer.mbed.org/platforms/EFM32-Wonder-Gecko/>`_
       - EFM32WG990F256
@@ -558,6 +1035,26 @@ Silicon Labs
       - 32 Kb
       - 4 Kb
 
+Smeshlink
+~~~~~~~~~
+
+.. list-table::
+    :header-rows:  1
+
+    * - Type ``board``
+      - Name
+      - Microcontroller
+      - Frequency
+      - Flash
+      - RAM
+
+    * - ``xbed_lpc1768``
+      - `Smeshlink xbed LPC1768 <https://developer.mbed.org/platforms/xbed-LPC1768/>`_
+      - LPC1768
+      - 96 MHz
+      - 512 Kb
+      - 32 Kb
+
 Solder Splash Labs
 ~~~~~~~~~~~~~~~~~~
 
@@ -578,6 +1075,26 @@ Solder Splash Labs
       - 32 Kb
       - 8 Kb
 
+SolderSplash Labs
+~~~~~~~~~~~~~~~~~
+
+.. list-table::
+    :header-rows:  1
+
+    * - Type ``board``
+      - Name
+      - Microcontroller
+      - Frequency
+      - Flash
+      - RAM
+
+    * - ``lpc1347``
+      - `DipCortex M3 <https://developer.mbed.org/platforms/DipCortex-M3/>`_
+      - LPC1347
+      - 72 MHz
+      - 64 Kb
+      - 12 Kb
+
 Switch Science
 ~~~~~~~~~~~~~~
 
@@ -605,6 +1122,20 @@ Switch Science
       - 32 Kb
       - 4 Kb
 
+    * - ``ssci824``
+      - `Switch Science mbed LPC824 <https://developer.mbed.org/platforms/Switch-Science-mbed-LPC824/>`_
+      - LPC824
+      - 30 MHz
+      - 32 Kb
+      - 8 Kb
+
+    * - ``ty51822r3``
+      - `Switch Science mbed TY51822r3 <https://developer.mbed.org/platforms/Switch-Science-mbed-TY51822r3/>`_
+      - NRF51822
+      - 32 MHz
+      - 256 Kb
+      - 32 Kb
+
 Teensy
 ~~~~~~
 
@@ -619,7 +1150,7 @@ Teensy
       - RAM
 
     * - ``teensy31``
-      - `Teensy 3.1 <https://www.pjrc.com/store/teensy31.html>`_
+      - `Teensy 3.1 / 3.2 <https://www.pjrc.com/store/teensy31.html>`_
       - MK20DX256
       - 72 MHz
       - 256 Kb
@@ -643,4 +1174,26 @@ u-blox
       - LPC1768
       - 96 MHz
       - 512 Kb
-      - 32 Kb
+      - 64 Kb
+
+y5 design
+~~~~~~~~~
+
+.. list-table::
+    :header-rows:  1
+
+    * - Type ``board``
+      - Name
+      - Microcontroller
+      - Frequency
+      - Flash
+      - RAM
+
+    * - ``nrf51822_y5_mbug``
+      - `y5 nRF51822 mbug <https://developer.mbed.org/platforms/Y5-NRF51822-MBUG/>`_
+      - NRF51822
+      - 16 MHz
+      - 256 Kb
+      - 16 Kb
+
+.. include:: mbed_extra.rst

docs/frameworks/mbed_extra.rst

@@ -0,0 +1,32 @@
+..  Copyright 2014-present PlatformIO <contact@platformio.org>
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+       http://www.apache.org/licenses/LICENSE-2.0
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+
+Articles
+--------
+
+* Dec 15, 2015 - **stastaka** - `PlatformIOでカスタムボードを使う (Use a custom board for PlatformIO, Japanese) <http://qiita.com/stastaka/items/a6a50dbbb2933bd78bdd>`_
+* Nov 06, 2015 - **nocd5** - `PlatformIOでmbedをオフラインビルドしSTM32 Nucleoボードでmrubyを使う (Use mruby in the offline build for STM32 Nucleo board with mbed and PlatformIO, Japanese) <http://qiita.com/nocd5/items/d5fda776240f7e7c17eb>`_
+* Oct 21, 2015 - **Vittorio Zaccaria** - `Using a cheap STM32 Nucleo to teach remote sensor monitoring <http://www.vittoriozaccaria.net/blog/2015/10/21/using-a-cheap-stm32-nucleo-to-teach-remote-sensor-monitoring.html>`_
+* Sep 01, 2015 - **Thomas P. Weldon, Ph.D.** - `Improvised MBED FRDM-K64F Eclipse/PlatformIO Setup and Software Installation <http://thomasweldon.com/tpw/courses/embeddsp/p00pcFrdmK64_eclipsePlatformioSetup.html>`_
+
+See more :ref:`articles`.
+
+Examples
+--------
+
+All project examples are located in PlatformIO repository
+`Examples for MBED framework <https://github.com/platformio/platformio-examples/tree/develop/mbed>`_.
+
+* `Blink <https://github.com/platformio/platformio-examples/tree/develop/mbed/mbed-blink>`_
+* `DSP <https://github.com/platformio/platformio-examples/tree/develop/mbed/mbed-dsp>`_
+* `HTTP Client <https://github.com/platformio/platformio-examples/tree/develop/mbed/mbed-http-client>`_
+* `RTOS <https://github.com/platformio/platformio-examples/tree/develop/mbed/mbed-rtos>`_
+* `Serial <https://github.com/platformio/platformio-examples/tree/develop/mbed/mbed-serial>`_

docs/frameworks/simba.rst

@@ -0,0 +1,169 @@
+..  Copyright 2014-present PlatformIO <contact@platformio.org>
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+       http://www.apache.org/licenses/LICENSE-2.0
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+
+.. _framework_simba:
+
+Framework ``simba``
+===================
+Simba is an RTOS and build framework. It aims to make embedded programming easy and portable.
+
+For more detailed information please visit `vendor site <http://simba-os.readthedocs.org>`_.
+
+.. contents::
+
+Platforms
+---------
+.. list-table::
+    :header-rows:  1
+
+    * - Name
+      - Description
+
+    * - :ref:`platform_atmelavr`
+      - Atmel AVR 8- and 32-bit MCUs deliver a unique combination of performance, power efficiency and design flexibility. Optimized to speed time to market-and easily adapt to new ones-they are based on the industrys most code-efficient architecture for C and assembly programming.
+
+    * - :ref:`platform_atmelsam`
+      - Atmel | SMART offers Flash- based ARM products based on the ARM Cortex-M0+, Cortex-M3 and Cortex-M4 architectures, ranging from 8KB to 2MB of Flash including a rich peripheral and feature mix.
+
+    * - :ref:`platform_espressif8266`
+      - Espressif Systems is a privately held fabless semiconductor company. They provide wireless communications and Wi-Fi chips which are widely used in mobile devices and the Internet of Things applications.
+
+Boards
+------
+
+.. note::
+    * You can list pre-configured boards by :ref:`cmd_boards` command or
+      `PlatformIO Boards Explorer <http://platformio.org/boards>`_
+    * For more detailed ``board`` information please scroll tables below by horizontal.
+
+Adafruit
+~~~~~~~~
+
+.. list-table::
+    :header-rows:  1
+
+    * - Type ``board``
+      - Name
+      - Microcontroller
+      - Frequency
+      - Flash
+      - RAM
+
+    * - ``huzzah``
+      - `Adafruit HUZZAH ESP8266 <https://www.adafruit.com/products/2471>`_
+      - ESP8266
+      - 80 MHz
+      - 4096 Kb
+      - 80 Kb
+
+Arduino
+~~~~~~~
+
+.. list-table::
+    :header-rows:  1
+
+    * - Type ``board``
+      - Name
+      - Microcontroller
+      - Frequency
+      - Flash
+      - RAM
+
+    * - ``due``
+      - `Arduino Due (Programming Port) <http://www.arduino.org/products/boards/4-arduino-boards/arduino-due>`_
+      - SAM3X8E
+      - 84 MHz
+      - 512 Kb
+      - 32 Kb
+
+    * - ``megaatmega2560``
+      - `Arduino Mega or Mega 2560 ATmega2560 (Mega 2560) <http://www.arduino.org/products/boards/4-arduino-boards/arduino-mega-2560>`_
+      - ATMEGA2560
+      - 16 MHz
+      - 256 Kb
+      - 8 Kb
+
+    * - ``nanoatmega328``
+      - `Arduino Nano ATmega328 <http://www.arduino.org/products/boards/4-arduino-boards/arduino-nano>`_
+      - ATMEGA328P
+      - 16 MHz
+      - 32 Kb
+      - 2 Kb
+
+    * - ``uno``
+      - `Arduino Uno <http://www.arduino.org/products/boards/4-arduino-boards/arduino-uno>`_
+      - ATMEGA328P
+      - 16 MHz
+      - 32 Kb
+      - 2 Kb
+
+Espressif
+~~~~~~~~~
+
+.. list-table::
+    :header-rows:  1
+
+    * - Type ``board``
+      - Name
+      - Microcontroller
+      - Frequency
+      - Flash
+      - RAM
+
+    * - ``esp01``
+      - `Espressif Generic ESP8266 ESP-01 512k <http://www.esp8266.com/wiki/doku.php?id=esp8266-module-family>`_
+      - ESP8266
+      - 80 MHz
+      - 512 Kb
+      - 80 Kb
+
+    * - ``esp01_1m``
+      - `Espressif Generic ESP8266 ESP-01 1M <http://www.esp8266.com/wiki/doku.php?id=esp8266-module-family>`_
+      - ESP8266
+      - 80 MHz
+      - 1024 Kb
+      - 80 Kb
+
+    * - ``esp12e``
+      - `Espressif ESP8266 ESP-12E <http://www.esp8266.com/wiki/doku.php?id=esp8266-module-family>`_
+      - ESP8266
+      - 80 MHz
+      - 4096 Kb
+      - 80 Kb
+
+NodeMCU
+~~~~~~~
+
+.. list-table::
+    :header-rows:  1
+
+    * - Type ``board``
+      - Name
+      - Microcontroller
+      - Frequency
+      - Flash
+      - RAM
+
+    * - ``nodemcu``
+      - `NodeMCU 0.9 (ESP-12 Module) <http://www.nodemcu.com/>`_
+      - ESP8266
+      - 80 MHz
+      - 4096 Kb
+      - 80 Kb
+
+    * - ``nodemcuv2``
+      - `NodeMCU 1.0 (ESP-12E Module) <http://www.nodemcu.com/>`_
+      - ESP8266
+      - 80 MHz
+      - 4096 Kb
+      - 80 Kb
+
+.. include:: simba_extra.rst

docs/frameworks/simba_extra.rst

@@ -0,0 +1,18 @@
+..  Copyright 2014-present PlatformIO <contact@platformio.org>
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+       http://www.apache.org/licenses/LICENSE-2.0
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+
+Examples
+--------
+
+All project examples are located in PlatformIO repository
+`Examples for Simba framework <https://github.com/platformio/platformio-examples/tree/develop/examples/simba>`_.
+
+* `Blink <https://github.com/platformio/platformio-examples/tree/develop/simba/blink>`_

docs/frameworks/spl.rst

@@ -1,3 +1,14 @@
+..  Copyright 2014-present PlatformIO <contact@platformio.org>
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+       http://www.apache.org/licenses/LICENSE-2.0
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+
 .. _framework_spl:
 
 Framework ``spl``
@@ -24,7 +35,7 @@ Boards
 
 .. note::
     * You can list pre-configured boards by :ref:`cmd_boards` command or
-      `PlatformIO Boards Explorer <http://platformio.org/#!/boards>`_
+      `PlatformIO Boards Explorer <http://platformio.org/boards>`_
     * For more detailed ``board`` information please scroll tables below by horizontal.
 
 Armstrap
@@ -94,3 +105,12 @@ ST
       - 32 MHz
       - 128 Kb
       - 16 Kb
+
+    * - ``nucleo_f401re``
+      - `ST Nucleo F401RE <https://developer.mbed.org/platforms/ST-Nucleo-F401RE/>`_
+      - STM32F401RET6
+      - 84 MHz
+      - 512 Kb
+      - 96 Kb
+
+.. include:: spl_extra.rst

docs/frameworks/spl_extra.rst

@@ -0,0 +1,18 @@
+..  Copyright 2014-present PlatformIO <contact@platformio.org>
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+       http://www.apache.org/licenses/LICENSE-2.0
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+
+Examples
+--------
+
+All project examples are located in PlatformIO repository
+`Examples for SPL framework <https://github.com/platformio/platformio-examples/tree/develop/stm32>`_.
+
+* `Blink <https://github.com/platformio/platformio-examples/tree/develop/stm32/stm32-spl-blink>`_

docs/frameworks/wiringpi.rst

@@ -0,0 +1,75 @@
+..  Copyright 2014-present PlatformIO <contact@platformio.org>
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+       http://www.apache.org/licenses/LICENSE-2.0
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+
+.. _framework_wiringpi:
+
+Framework ``wiringpi``
+======================
+WiringPi is a GPIO access library written in C for the BCM2835 used in the Raspberry Pi. It's designed to be familiar to people who have used the Arduino "wiring" system.
+
+For more detailed information please visit `vendor site <http://wiringpi.com>`_.
+
+.. contents::
+
+Platforms
+---------
+.. list-table::
+    :header-rows:  1
+
+    * - Name
+      - Description
+
+    * - :ref:`platform_linux_arm`
+      - Linux ARM is a Unix-like and mostly POSIX-compliant computer operating system (OS) assembled under the model of free and open-source software development and distribution. Using host OS (Mac OS X, Linux ARM) you can build native application for Linux ARM platform.
+
+Boards
+------
+
+.. note::
+    * You can list pre-configured boards by :ref:`cmd_boards` command or
+      `PlatformIO Boards Explorer <http://platformio.org/boards>`_
+    * For more detailed ``board`` information please scroll tables below by horizontal.
+
+Raspberry Pi
+~~~~~~~~~~~~
+
+.. list-table::
+    :header-rows:  1
+
+    * - Type ``board``
+      - Name
+      - Microcontroller
+      - Frequency
+      - Flash
+      - RAM
+
+    * - ``raspberrypi_1b``
+      - `Raspberry Pi 1 Model B <https://www.raspberrypi.org>`_
+      - BCM2835
+      - 700 MHz
+      - 524288 Kb
+      - 524288 Kb
+
+    * - ``raspberrypi_2b``
+      - `Raspberry Pi 2 Model B <https://www.raspberrypi.org>`_
+      - BCM2836
+      - 900 MHz
+      - 1048576 Kb
+      - 1048576 Kb
+
+    * - ``raspberrypi_zero``
+      - `Raspberry Pi Zero <https://www.raspberrypi.org>`_
+      - BCM2835
+      - 1000 MHz
+      - 524288 Kb
+      - 524288 Kb
+
+.. include:: wiringpi_extra.rst

docs/frameworks/wiringpi_extra.rst

@@ -0,0 +1,19 @@
+..  Copyright 2014-present PlatformIO <contact@platformio.org>
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+       http://www.apache.org/licenses/LICENSE-2.0
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+
+Examples
+--------
+
+All project examples are located in PlatformIO repository
+`Examples for WiringPi framework <https://github.com/platformio/platformio-examples/tree/develop/raspberrypi>`_.
+
+* `Blink <https://github.com/platformio/platformio-examples/tree/develop/raspberrypi/wiringpi-blink>`_
+* `Serial <https://github.com/platformio/platformio-examples/tree/develop/raspberrypi/wiringpi-serial>`_

docs/history.rst

@@ -1 +1,12 @@
+..  Copyright 2014-present PlatformIO <contact@platformio.org>
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+       http://www.apache.org/licenses/LICENSE-2.0
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+
 .. include:: ../HISTORY.rst

docs/ide.rst

@@ -1,3 +1,14 @@
+..  Copyright 2014-present PlatformIO <contact@platformio.org>
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+       http://www.apache.org/licenses/LICENSE-2.0
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+
 .. _ide:
 
 IDE Integration
@@ -6,11 +17,12 @@ IDE Integration
 .. toctree::
     :maxdepth: 2
 
-    ide/arduino
     ide/atom
     ide/clion
+    ide/codeblocks
     ide/eclipse
-    ide/energia
+    ide/emacs
+    ide/netbeans
     ide/qtcreator
     ide/sublimetext
     ide/vim

docs/ide/_platformio_ide_extra.rst

@@ -0,0 +1,31 @@
+..  Copyright 2014-present PlatformIO <contact@platformio.org>
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+       http://www.apache.org/licenses/LICENSE-2.0
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+
+.. note::
+    We are proud to present our official `PlatformIO IDE <http://platformio.org/platformio-ide>`_ -
+    The next-generation integrated development environment for IoT.
+
+    * Cross-platform build system without external dependencies to the OS software:
+
+        - 300+ embedded boards
+        - 15+ development platforms
+        - 10+ frameworks
+
+    * C/C++ Intelligent code completion
+    * C/C++ Smart code linter for super-fast coding
+    * Library Manager for the hundreds popular libraries
+    * Multi-projects workflow with multiple panes
+    * Multiple panes
+    * Themes support with dark and light colors
+    * Serial Port Monitor
+    * Built-in Terminal with :ref:`PlatformIO CLI <userguide>` tool (``pio``, ``platformio``)
+
+    `Install PlatformIO IDE <http://platformio.org/platformio-ide>`_.

docs/ide/arduino.rst

@@ -1,31 +0,0 @@
-.. _ide_arduino:
-
-Arduino
-=======
-
-The open-source `Arduino Software (IDE) <http://arduino.cc/en/main/software>`_
-makes it easy to write code and upload it to the board. It runs on *Windows,
-Mac OS X, and Linux*. The environment is written in *Java* and based on
-*Processing* and other open-source software.
-
-This software can be used with:
-
-* :ref:`platform_atmelavr`
-* :ref:`platform_atmelsam`
-* :ref:`framework_arduino`
-
-Refer to the `Arduino Getting Started <http://arduino.cc/en/Guide/HomePage>`_
-page for Installation instructions.
-
-Integration
------------
-
-More detailed information is located in PlatformIO blog:
-`Integration of PlatformIO library manager to Arduino IDE <http://www.ikravets.com/computer-life/platformio/2014/10/07/integration-of-platformio-library-manager-to-arduino-and-energia-ides>`_.
-
-
-Screenshot
-----------
-
-.. image:: ../_static/ide-platformio-arduino.png
-    :target: http://www.ikravets.com/computer-life/platformio/2014/10/07/integration-of-platformio-library-manager-to-arduino-and-energia-ides

docs/ide/atom.rst

@@ -1,39 +1,502 @@
+..  Copyright 2014-present PlatformIO <contact@platformio.org>
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+       http://www.apache.org/licenses/LICENSE-2.0
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+
 .. _ide_atom:
 
-Atom
-====
+PlatformIO IDE for Atom
+=======================
 
-`Atom <https://atom.io>`_ is a text editor that's modern, approachable,
-yet hackable to the core—a tool you can customize to do anything but also use
-productively without ever touching a config file.
+PlatformIO IDE is the next-generation integrated development environment for IoT:
 
-This software can be used with:
+* Cross-platform build system without external dependencies to the OS software:
 
-* all available :ref:`platforms`
-* all available :ref:`frameworks`
+    - 300+ embedded boards
+    - 15+ development platforms
+    - 10+ frameworks
 
-Refer to the `Atom Documentation <https://atom.io/docs>`_
-page for more detailed information.
+* C/C++ Intelligent Code Completion
+* C/C++ Smart Code Linter for rapid professional development
+* Library Manager for the hundreds popular libraries
+* Multi-projects workflow with multiple panes
+* Themes support with dark and light colors
+* Serial Port Monitor
+* Built-in Terminal with :ref:`PlatformIO CLI <userguide>` tool (``pio``, ``platformio``)
+
+
+PlatformIO IDE is based on GitHub's `Atom <https://atom.io>`_ source
+code editor that's modern, approachable, yet hackable to the core; a tool you
+can customize to do anything but also use productively without ever touching a
+config file.
+
+.. image:: ../_static/ide-atom-platformio.png
+    :target: http://docs.platformio.org/en/stable/_images/ide-atom-platformio.png
 
 .. contents::
 
-Integration
+Installation
+------------
+
+PlatformIO IDE is the next-generation integrated development environment for IoT.
+It's built on top of `GitHub's Atom "hackable" text editor <https://atom.io>`_.
+If you have already Atom installed, please install `PlatformIO IDE for Atom package <https://atom.io/packages/platformio-ide>`_.
+
+.. note::
+    You don't need to install PlatformIO CLI separately to system.
+    PlatformIO CLI is built into PlatformIO IDE and you will be able to use it
+    within PlatformIO IDE Terminal.
+
+1. Python Interpreter
+~~~~~~~~~~~~~~~~~~~~~
+
+PlatformIO IDE is based on PlatformIO CLI which is written in
+`Python <https://www.python.org/downloads/>`_. Python is installed by default
+on the all popular OS except Windows.
+
+**Windows Users**, please `Download the latest Python 2.7.x <https://www.python.org/downloads/>`_
+and install it. **DON'T FORGET** to select ``Add python.exe to Path`` feature
+on the "Customize" stage, otherwise ``python`` command will not be available.
+
+.. image:: ../_static/python-installer-add-path.png
+
+.. _ide_atom_installation_clang:
+
+2. Clang for Intelligent Code Autocompletion
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+PlatformIO IDE uses `clang <http://clang.llvm.org>`_ for the Intelligent Code
+Autocompletion. To check that ``clang`` is available in your system, please
+open Terminal and run ``clang --version``. If ``clang`` is not installed,
+then install it and restart Atom:
+
+- **Mac OS X**: `Install the latest Xcode <https://developer.apple.com/xcode/download/>`_
+  along with the latest Command Line Tools
+  (they are installed automatically when you run ``clang`` in Terminal for the
+  first time, or manually by running ``xcode-select --install``
+- **Windows**: Download the latest `Clang for Windows <http://llvm.org/releases/download.html>`_.
+  Please select "Add LLVM to the system PATH" option on the installation step.
+
+  .. image:: ../_static/clang-installer-add-path.png
+
+  .. warning::
+      If you see ``Failed to find MSBuild toolsets directory`` error in
+      the installation console, please ignore it and press any key to close
+      this window. PlatformIO IDE uses only Clang completion engine that
+      should work after it without any problems.
+
+- **Linux**: Using package managers: ``apt-get install clang`` or ``yum install clang``.
+- **Other Systems**: Download the latest `Clang for the other systems <http://llvm.org/releases/download.html>`_.
+
+.. warning::
+    If some libraries are not visible in :ref:`ide_atom` and Code Completion or
+    Code Linting does not work properly, please perform  ``Menu: PlatformIO >
+    Rebuild C/C++ Project Index (Autocomplete, Linter)``
+
+3. IDE Installation
+~~~~~~~~~~~~~~~~~~~
+
+.. note::
+    If you don't have Atom installed yet, we propose to download
+    `PlatformIO IDE for Atom bundle <http://platformio.org/platformio-ide>`_
+    with built-in auto installer (optional).
+
+- Download and install the `latest official Atom text editor <https://atom.io>`_.
+- Open Atom Package Manager and install `platformio-ide <https://atom.io/packages/platformio-ide>`_
+   Atom package (be patient and let the installation complete)
+
+    - **Mac OS X**: ``Menu: Atom > Preferences > Install``
+    - **Windows**: ``Menu: File > Settings > Install``
+    - **Linux**: ``Menu: Edit > Preferences > Install``
+
+.. image:: ../_static/ide-atom-platformio-install.png
+
+.. _atom_ide_quickstart:
+
+Quick Start
 -----------
 
-Using `Atom Packages <https://atom.io/docs/v1.0.2/using-atom-atom-packages>`_
-please install `platomformio <https://atom.io/packages/platomformio>`_ package.
+This tutorial introduces you to the basics of PlatformIO IDE workflow and shows
+you a creation process of a simple "Blink" example. After finishing you will
+have a general understanding of how to work with projects in the IDE.
 
-Screenshot
+Launch
+~~~~~~
+
+After installation, you launch PlatformIO IDE by opening Atom. Once Atom is
+open, PlatformIO IDE auto installer will continue to install dependent packages
+and PlatformIO CLI. Please be patient and let the installation complete. In the
+final result PlatformIO IDE will ask you to reload Atom window to apply
+installed components. Please click on ``Reload Now``. After it PlatformIO IDE is
+ready for using. Happy coding!
+
+Setting Up the Project
+~~~~~~~~~~~~~~~~~~~~~~
+
+1. To create a new project choose
+   ``Menu: PlatformIO > Initialize new Project or update existing`` or press
+   the corresponding icon in the PlatformIO toolbar as shown in the image below:
+
+.. image:: ../_static/ide-atom-platformio-quick-start-1.png
+    :target: http://docs.platformio.org/en/stable/_images/ide-atom-platformio-quick-start-1.png
+
+2. In the "New Project Menu" choose desired boards (more than one board is
+   allowed) and select a project directory. Then press "Initialize" button:
+
+.. image:: ../_static/ide-atom-platformio-quick-start-2.png
+    :target: http://docs.platformio.org/en/stable/_images/ide-atom-platformio-quick-start-2.png
+
+3. If everything is fine, you should see the success message and project tree
+   in the left panel:
+
+.. image:: ../_static/ide-atom-platformio-quick-start-3.png
+    :target: http://docs.platformio.org/en/stable/_images/ide-atom-platformio-quick-start-3.png
+
+4. Now, let's create the first project source file: right-click on the folder
+   ``src`` and choose ``New File``:
+
+.. image:: ../_static/ide-atom-platformio-quick-start-4.png
+    :target: http://docs.platformio.org/en/stable/_images/ide-atom-platformio-quick-start-4.png
+
+Enter filename ``main.cpp``:
+
+.. image:: ../_static/ide-atom-platformio-quick-start-5.png
+    :target: http://docs.platformio.org/en/stable/_images/ide-atom-platformio-quick-start-5.png
+
+Copy the next source code to the just created file ``main.cpp``:
+
+.. code-block:: cpp
+
+    /**
+     * Blink
+     * Turns on an LED on for one second,
+     * then off for one second, repeatedly.
+     */
+    #include "Arduino.h"
+
+    void setup()
+    {
+      // initialize LED digital pin as an output.
+      pinMode(LED_BUILTIN, OUTPUT);
+    }
+
+    void loop()
+    {
+      // turn the LED on (HIGH is the voltage level)
+      digitalWrite(LED_BUILTIN, HIGH);
+      // wait for a second
+      delay(1000);
+      // turn the LED off by making the voltage LOW
+      digitalWrite(LED_BUILTIN, LOW);
+       // wait for a second
+      delay(1000);
+    }
+
+Process Project
+~~~~~~~~~~~~~~~
+
+PlatformIO IDE proposes different ways to process project (build, clean,
+upload firmware, run other targets) using:
+
+    - :ref:`atom_ide_platformio_toolbar`
+    - :ref:`atom_ide_platformio_menu`
+    - :ref:`ide_atom_building_targets` and hotkeys
+
+.. image:: ../_static/ide-atom-platformio-quick-start-6.png
+    :target: http://docs.platformio.org/en/stable/_images/ide-atom-platformio-quick-start-6.png
+
+5. Run ``Build`` and you should see green "success" result in the building
+   panel:
+
+.. image:: ../_static/ide-atom-platformio-quick-start-7.png
+    :target: http://docs.platformio.org/en/stable/_images/ide-atom-platformio-quick-start-7.png
+
+To upload firmware to the board run ``Upload``.
+
+6. What is more, you can run specific target or process project environment
+   using ``Menu: PlatformIO > Run other target...``
+   or call targets list from the status bar (bottom, left corner):
+
+.. image:: ../_static/ide-atom-platformio-quick-start-8.png
+    :target: http://docs.platformio.org/en/stable/_images/ide-atom-platformio-quick-start-8.png
+
+And select desired target:
+
+.. image:: ../_static/ide-atom-platformio-quick-start-9.png
+    :target: http://docs.platformio.org/en/stable/_images/ide-atom-platformio-quick-start-9.png
+
+7. To run built-in terminal interface choose ``Menu: PlatformIO > Terminal`` or
+   press the corresponding icon in the PlatformIO toolbar:
+
+.. image:: ../_static/ide-atom-platformio-quick-start-10.png
+    :target: http://docs.platformio.org/en/stable/_images/ide-atom-platformio-quick-start-10.png
+
+It provides you fast access to all set of powerful PlatformIO CLI commands:
+
+.. image:: ../_static/ide-atom-platformio-quick-start-11.png
+    :target: http://docs.platformio.org/en/stable/_images/ide-atom-platformio-quick-start-11.png
+
+8. To run built-in "Serial Monitor" choose ``Menu: PlatformIO > Serial Monitor``
+   or press the corresponding icon in the PlatformIO toolbar:
+
+.. image:: ../_static/ide-atom-platformio-quick-start-12.png
+    :target: http://docs.platformio.org/en/stable/_images/ide-atom-platformio-quick-start-12.png
+
+It has several settings to adjust your connection:
+
+.. image:: ../_static/ide-atom-platformio-quick-start-13.png
+    :target: http://docs.platformio.org/en/stable/_images/ide-atom-platformio-quick-start-13.png
+
+And allows you to communicate with your board in an easy way:
+
+.. image:: ../_static/ide-atom-platformio-quick-start-14.png
+    :target: http://docs.platformio.org/en/stable/_images/ide-atom-platformio-quick-start-14.png
+
+
+User Guide
 ----------
 
-Building
-^^^^^^^^
+.. _atom_ide_platformio_menu:
 
-.. image:: ../_static/ide-platformio-atom-1.gif
-    :target: https://atom.io/packages/platomformio
+Menu item ``PlatformIO``
+~~~~~~~~~~~~~~~~~~~~~~~~
 
-Uploading
-^^^^^^^^^
+`platformio-ide <https://atom.io/packages/platformio-ide>`_ package adds to Atom
+new menu item named ``Menu: PlatformIO`` (after ``Menu: Help`` item).
 
-.. image:: ../_static/ide-platformio-atom-2.gif
-    :target: https://atom.io/packages/platomformio
+.. image:: ../_static/ide-atom-platformio-menu-item.png
+
+.. _atom_ide_platformio_toolbar:
+
+PlatformIO Toolbar
+~~~~~~~~~~~~~~~~~~
+
+PlatformIO IDE Toolbar contains the quick access button to the popular commands.
+Each button contains hint (delay mouse on it).
+
+.. image:: ../_static/ide-atom-platformio-toolbar.png
+
+* PlatformIO: Build
+* PlatformIO: Upload
+* PlatformIO: Clean
+* ||
+* Initialize new PlatformIO Project or update existing...
+* Add/Open Project Folder...
+* Find in Project...
+* ||
+* Terminal
+* Library Manager
+* Serial Monitor
+* ||
+* Settings
+* PlatformIO Documentation
+
+.. _ide_atom_building_targets:
+
+Building / Uploading / Targets
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+* ``cmd-alt-b`` / ``ctrl-alt-b`` / ``f9`` builds project without auto-uploading.
+* ``cmd-alt-u`` / ``ctrl-alt-u`` builds and uploads (if no errors).
+* ``cmd-alt-c`` / ``ctrl-alt-c`` cleans compiled objects.
+* ``cmd-alt-t`` / ``ctrl-alt-t`` / ``f7`` run other targets (Upload using Programmer, Upload SPIFFS image, Update platforms and libraries).
+* ``cmd-alt-g`` / ``ctrl-alt-g`` / ``f4`` cycles through causes of build error.
+* ``cmd-alt-h`` / ``ctrl-alt-h`` / ``shift-f4`` goes to the first build error.
+* ``cmd-alt-v`` / ``ctrl-alt-v`` / ``f8`` toggles the build panel.
+* ``escape`` terminates build / closes the build window.
+
+More options ``Menu: PlatformIO > Settings > Build``.
+
+Intelligent Code Autocompletion
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+PlatformIO IDE uses `clang <http://clang.llvm.org>`_ for the Intelligent Code Autocompletion.
+To install it or check if it is already installed, please follow to step
+:ref:`ide_atom_installation_clang` from Installation guide.
+
+.. warning::
+    The libraries which are added/installed after initializing process will
+    not be reflected in code linter. You need ``Menu: PlatformIO >
+    Rebuild C/C++ Project Index (Autocomplete, Linter)``.
+
+.. _ide_atom_smart_code_linter:
+
+Smart Code Linter
+~~~~~~~~~~~~~~~~~
+
+PlatformIO IDE uses PlatformIO's pre-built GCC toolchains for Smart Code Linter
+and rapid professional development.
+The configuration data are located in ``.gcc-flags.json``. This file will be
+automatically created and preconfigured when you initialize project using
+``Menu: PlatformIO > Initialize new PlatformIO Project or update existing...``.
+
+.. warning::
+    If some libraries are not visible in :ref:`ide_atom` and Code Completion or
+    Code Linting does not work properly, please perform  ``Menu: PlatformIO >
+    Rebuild C/C++ Project Index (Autocomplete, Linter)``
+
+
+.. error::
+    If you have error like ``linter-gcc: Executable not found`` and
+    ``"***/.platformio/packages/toolchain-atmelavr/bin/avr-g++" not found``
+    please ``Menu: PlatformIO > Initialize new PlatformIO Project or update existing...``.
+
+Install Shell Commands
+~~~~~~~~~~~~~~~~~~~~~~
+
+To install ``platformio`` and ``pio`` shell commands please use ``Menu:
+PlatformIO > Install Shell Commands``. It will allow you to call PlatformIO from
+other process, terminal and etc.
+
+Known issues
+------------
+
+Smart Code Linter is disabled for Arduino files
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+:ref:`ide_atom_smart_code_linter` is disabled by default for Arduino files
+(``*.ino`` and ``.pde``) because they  are not valid C/C++ based
+source files:
+
+1. Missing includes such as ``#include <Arduino.h>``
+2. Function declarations are omitted.
+
+There are two solutions:
+
+.. contents::
+    :local:
+
+.. _ide_atom_knownissues_sclarduino_manually:
+
+Convert Arduino file to C++ manually
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+For example, we have the next ``Demo.ino`` file:
+
+.. code-block:: cpp
+
+    void setup () {
+        someFunction(13);
+    }
+
+    void loop() {
+        delay(1000);
+    }
+
+    void someFunction(int num) {
+    }
+
+Let's convert it to  ``Demo.cpp``:
+
+1. Add ``#include <Arduino.h>`` at the top of the source file
+2. Declare each custom function (excluding built-in, such as ``setup`` and ``loop``)
+   before it will be called.
+
+The final ``Demo.cpp``:
+
+.. code-block:: cpp
+
+    #include <Arduino.h>
+
+    void someFunction(int num);
+
+    void setup () {
+        someFunction(13);
+    }
+
+    void loop() {
+        delay(1000);
+    }
+
+    void someFunction(int num) {
+    }
+
+Force Arduino file as C++
+^^^^^^^^^^^^^^^^^^^^^^^^^
+
+To force Smart Code Linter to use Arduino files as C++ please
+
+1. Open ``.gcc-flags.json`` file from the Initialized/Imported project and add
+   ``-x c++`` flag at the beginning of the value of ``gccDefaultCppFlags`` field:
+
+.. code-block:: json
+
+    {
+      "execPath": "...",
+      "gccDefaultCFlags": "...",
+      "gccDefaultCppFlags": "-x c++ -fsyntax-only ...",
+      "gccErrorLimit": 15,
+      "gccIncludePaths": "...",
+      "gccSuppressWarnings": false
+    }
+
+2. Perform all steps from :ref:`ide_atom_knownissues_sclarduino_manually`
+   (without renaming to ``.cpp``).
+
+Arch Linux: PlatformIO IDE Terminal issue
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Please read this article `Installing PlatformIO on Arch Linux <https://primalcortex.wordpress.com/2016/08/18/platformio/>`_.
+
+.. _ide_atom_faq:
+
+Frequently Asked Questions
+--------------------------
+
+Keep build panel visible
+~~~~~~~~~~~~~~~~~~~~~~~~
+
+PlatformIO IDE hides build panel on success by default. Nevertheless, you can
+keep it visible all time. Please follow to
+``Menu: PlatformIO > Settings > Build`` and set ``Panel Visibility`` to
+``Keep Visible``.
+
+Key-bindings (toggle panel):
+
+* ``cmd+alt+v`` - Mac OS X
+* ``ctrl+alt+v`` - Windows/Linux
+
+Automatically save on build
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+If you want automatically save all edited files when triggering a build, please follow to
+``Menu: PlatformIO > Settings > Build`` and check ``Automatically save on build``.
+
+Jump to Declaration
+~~~~~~~~~~~~~~~~~~~
+
+Click on a function/include, press ``F3`` and you will be taken directly to
+the declaration for that function.
+
+Code Formatting
+~~~~~~~~~~~~~~~
+
+You need to install `atom-beautify <https://atom.io/packages/atom-beautify>`_
+package and `C/C++ Uncrustify Code Beautifier <http://sourceforge.net/projects/uncrustify/>`_.
+
+Articles / Manuals
+------------------
+
+* Aug 18, 2016 - **Primal Cortex** - `Installing PlatformIO on Arch Linux <https://primalcortex.wordpress.com/2016/08/18/platformio/>`_
+* Jul 26, 2016 - **Embedded Systems Laboratory** - `แนะนำการใช้งาน PlatformIO IDE สำหรับบอร์ด Arduino และ ESP8266 (Get started with PlatformIO IDE for Arduino board and ESP8266, Thai) <http://cpre.kmutnb.ac.th/esl/learning/index.php?article=intro_platformio-ide>`_
+* May 30, 2016 - **Ron Moerman** - `IoT Development with PlatformIO <https://electronicsworkbench.io/blog/platformio>`_
+* May 01, 2016 - **Pedro Minatel** - `PlatformIO – Uma alternativa ao Arduino IDE (PlatformIO - An alternative to the Arduino IDE, Portuguese) <http://pedrominatel.com.br/ferramentas/platformio-uma-alternativa-ao-arduino-ide/>`_
+* Apr 23, 2016 - **Al Williams** - `Hackaday: Atomic Arduino (and Other) Development <http://hackaday.com/2016/04/23/atomic-arduino-and-other-development/>`_
+* Apr 16, 2016 - **Sathittham Sangthong** - `[PlatformIO] มาลองเล่น PlatformIO แทน Arduino IDE กัน (Let's play together with PlatformIO IDE [alternative to Arduino IDE], Thai) <http://www.sathittham.com/platformio/platformio-ide/>`_
+* Apr 11, 2016 - **Matjaz Trcek** - `Top 5 Arduino integrated development environments <https://codeandunicorns.com/top-5-arduino-integrated-development-environments-ide/>`_
+* Apr 06, 2016 - **Aleks** - `PlatformIO ausprobiert (Tried PlatformIO, German) <http://5volt-junkie.net/platformio/>`_
+* Apr 02, 2016 - **Diego Pinto** - `Você tem coragem de abandonar a IDE do Arduino? PlatformIO + Atom (Do you dare to leave the Arduino IDE? PlatformIO + Atom, Portuguese) <http://www.clubemaker.com.br/?rota=artigo/81>`_
+* Mar 30, 2016 - **Brandon Cannaday** - `Getting Started with PlatformIO and ESP8266 NodeMcu <https://www.getstructure.io/blog/getting-started-with-platformio-esp8266-nodemcu>`_
+* Mar 12, 2016 - **Peter Marks** - `PlatformIO, the Arduino IDE for programmers <http://blog.marxy.org/2016/03/platformio-arduino-ide-for-programmers.html>`_
+* Mar 05, 2016 - **brichacek.net** - `PlatformIO – otevřený ekosystém pro vývoj IoT (PlatformIO – an open source ecosystem for IoT development, Czech) <http://blog.brichacek.net/platformio-otevreny-ekosystem-pro-vyvoj-iot/>`_
+* Mar 04, 2016 - **Ricardo Vega** - `Programa tu Arduino desde Atom (Program your Arduino from Atom, Spanish) <http://ricveal.com/blog/programa-arduino-desde-atom/>`_
+* Feb 28, 2016 - **Alex Bloggt** - `PlatformIO vorgestellt (Introduction to PlatformIO IDE, German) <https://alexbloggt.com/platformio-vorgestellt/>`_
+* Feb 25, 2016 - **NutDIY** - `PlatformIO Blink On Nodemcu Dev Kit V1.0 (Thai) <http://nutdiy.blogspot.com/2016/02/platformio-blink-on-nodemcu-dev-kit-v10.html>`_
+
+See a full list with :ref:`articles`.

docs/ide/clion.rst

@@ -1,3 +1,14 @@
+..  Copyright 2014-present PlatformIO <contact@platformio.org>
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+       http://www.apache.org/licenses/LICENSE-2.0
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+
 .. _ide_clion:
 
 CLion
@@ -9,43 +20,131 @@ initial version will support the GCC and Clang compilers and GDB debugger.
 Clion includes such features as a smart editor, code quality assurance,
 automated refactorings, project manager, integrated version control systems.
 
-This software can be used with:
-
-* all available :ref:`platforms`
-* all available :ref:`frameworks`
-
-Refer to the `CDT Documentation <https://www.jetbrains.com/clion/documentation/>`_
+Refer to the `CLion Documentation <https://www.jetbrains.com/clion/documentation/>`_
 page for more detailed information.
 
+.. image:: ../_static/ide-platformio-clion.png
+    :target: http://docs.platformio.org/en/stable/_static/ide-platformio-clion.png
+
 .. contents::
 
 Integration
 -----------
 
-Project Generator
-^^^^^^^^^^^^^^^^^
-
-Since PlatformIO 2.0 you can generate CLion compatible project using
-:option:`platformio init --ide` command. Please choose board type using
-:ref:`cmd_boards` command and run:
+Choose board ``ID`` using :ref:`cmd_boards` or `Embedded Boards Explorer <http://platformio.org/boards>`_
+command and generate project via :option:`platformio init --ide` command:
 
 .. code-block:: shell
 
-    platformio init --ide clion --board %TYPE%
+    platformio init --ide clion --board <ID>
 
-Then import this project from start menu or via ``File > Import Project>`` and
-specify root directory where is located :ref:`projectconf`.
+    # For example, generate project for Arduino UNO
+    platformio init --ide clion --board uno
+
+Then:
+
+1. Place source files (``*.c, *.cpp, *.h, *.hpp``) to ``src`` directory
+2. Import this project via ``Menu: File > Import Project``
+   and specify root directory where is located :ref:`projectconf`
+3. Open source file from ``src`` directory
+4. Build project (*DO NOT RUN*): ``Menu: Run > Build``.
 
 .. warning::
-    CLion is still in the development stage, so some of the features (like,
-    auto-complete) probably will not work with PlatformIO. See
-    `CLion issue #CPP-3977 <https://youtrack.jetbrains.com/issue/CPP-3977>`_.
 
-    Active discussion located in
-    `PlatformIO issue #132 <https://github.com/platformio/platformio/issues/132>`_.
+    See know issue: :ref:`ide_clion_knownissues_inopde_not_supported` and how
+    to resolve it.
 
-Screenshot
-----------
+There are 6 predefined targets for building (*NOT FOR RUNNING*, see marks on
+the screenshot below):
 
-.. image:: ../_static/ide-platformio-clion.png
-    :target: http://docs.platformio.org/en/latest/_static/ide-platformio-clion.png
+* ``PLATFORMIO_BUILD`` - Build project without auto-uploading
+* ``PLATFORMIO_UPLOAD`` - Build and upload (if no errors)
+* ``PLATFORMIO_CLEAN`` - Clean compiled objects
+* ``PLATFORMIO_PROGRAM`` - Build and upload using external programmer
+  (if no errors), see :ref:`atmelavr_upload_via_programmer`
+* ``PLATFORMIO_UPLOADFS`` - Upload files to file system SPIFFS,
+  see :ref:`platform_espressif_uploadfs`
+* ``PLATFORMIO_UPDATE`` - Update installed platforms and libraries via :ref:`cmd_update`
+* ``PLATFORMIO_REBUILD_PROJECT_INDEX`` - Rebuild C/C++ Index for the Project.
+  Allows to fix code completion and code linting issues.
+
+.. warning::
+    The libraries which are added, installed or used in the project
+    after generating process wont be reflected in IDE. To fix it please run
+    ``PLATFORMIO_REBUILD_PROJECT_INDEX`` target.
+
+Known issues
+------------
+
+.. _ide_clion_knownissues_inopde_not_supported:
+
+Arduino ``.ino`` files are not supported
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+CLion uses "CMake" tool for code completion and code linting. As result, it
+doesn't support Arduino files (``*.ino`` and ``.pde``) because they are
+not valid C/C++ based source files:
+
+1. Missing includes such as ``#include <Arduino.h>``
+2. Function declarations are omitted.
+
+Convert Arduino file to C++ manually
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+For example, we have the next ``Demo.ino`` file:
+
+.. code-block:: cpp
+
+    void function setup () {
+        someFunction(13);
+    }
+
+    void function loop() {
+        delay(1000);
+    }
+
+    void someFunction(int num) {
+    }
+
+Let's convert it to  ``Demo.cpp``:
+
+1. Add ``#include <Arduino.h>`` at the top of the source file
+2. Declare each custom function (excluding built-in, such as ``setup`` and ``loop``)
+   before it will be called.
+
+The final ``Demo.cpp``:
+
+.. code-block:: cpp
+
+    #include <Arduino.h>
+
+    void someFunction(int num);
+
+    void function setup () {
+        someFunction(13);
+    }
+
+    void function loop() {
+        delay(1000);
+    }
+
+    void someFunction(int num) {
+    }
+
+
+Articles / Manuals
+------------------
+
+* Dec 01, 2015 - **JetBrains CLion Blog** - `C++ Annotated: Fall 2015. Arduino Support in CLion using PlatformIO <http://blog.jetbrains.com/clion/2015/12/cpp-annotated-fall-2015/>`_
+* Nov 22, 2015 - **Michał Seroczyński** - `Using PlatformIO to get started with Arduino in CLion IDE <http://www.ches.pl/using-platformio-get-started-arduino-clion-ide/>`_
+* Nov 09, 2015 - **ÁLvaro García Gómez** - `Programar con Arduino "The good way" (Programming with Arduino "The good way", Spanish) <http://congdegnu.es/2015/11/09/programar-con-arduino-the-good-way/>`_
+
+See more :ref:`articles`.
+
+Examples
+--------
+
+"Blink" Project
+~~~~~~~~~~~~~~~
+
+Source code of `CLion "Blink" Project <https://github.com/platformio/platformio-examples/tree/develop/ide/clion>`_.

docs/ide/codeblocks.rst

@@ -0,0 +1,54 @@
+..  Copyright 2014-present PlatformIO <contact@platformio.org>
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+       http://www.apache.org/licenses/LICENSE-2.0
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+
+.. _ide_codeblocks:
+
+CodeBlocks
+==========
+
+Code::Blocks is a free, open-source cross-platform IDE that supports multiple
+compilers including GCC, Clang and Visual C++. It is developed in C++ using
+wxWidgets as the GUI toolkit. Using a plugin architecture, its capabilities
+and features are defined by the provided plugins. Currently, Code::Blocks is
+oriented towards C, C++, and Fortran.
+
+CodeBlocks IDE can be downloaded from `here <http://www.codeblocks.org/downloads>`_.
+
+.. image:: ../_static/ide-platformio-codeblocks.png
+    :target: http://docs.platformio.org/en/stable/_images/ide-platformio-codeblocks.png
+
+.. contents::
+
+Integration
+-----------
+
+Choose board ``ID`` using :ref:`cmd_boards` or `Embedded Boards Explorer <http://platformio.org/boards>`_
+command and generate project via :option:`platformio init --ide` command:
+
+.. code-block:: shell
+
+    platformio init --ide codeblocks --board <ID>
+
+    # For example, generate project for Arduino UNO
+    platformio init --ide codeblocks --board uno
+
+Then:
+
+1. Open this project via ``Menu: File > Open...``
+2. Add new files to ``src`` directory (``*.c, *.cpp, *.ino, etc.``) via
+   ``Menu: File > New > File...``
+3. Build project using ``Menu: Build > Build``
+4. Upload firmware using ``Menu: Build > Run``
+
+.. warning::
+    The libraries which are added, installed or used in the project
+    after generating process wont be reflected in IDE. To fix it you
+    need to reinitialize project using :ref:`cmd_init` (repeat it).

docs/ide/eclipse.rst

@@ -1,3 +1,14 @@
+..  Copyright 2014-present PlatformIO <contact@platformio.org>
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+       http://www.apache.org/licenses/LICENSE-2.0
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+
 .. _ide_eclipse:
 
 Eclipse
@@ -13,43 +24,82 @@ with syntax highlighting, folding and hyperlink navigation, source code
 refactoring and code generation, visual debugging tools, including memory,
 registers, and disassembly viewers.
 
-This software can be used with:
-
-* all available :ref:`platforms`
-* all available :ref:`frameworks`
-
 Refer to the `CDT Documentation <https://eclipse.org/cdt/documentation.php>`_
 page for more detailed information.
 
+.. image:: ../_static/ide-platformio-eclipse.png
+    :target: http://docs.platformio.org/en/stable/_static/ide-platformio-eclipse.png
+
 .. contents::
 
 Integration
 -----------
 
-Project Generator
-^^^^^^^^^^^^^^^^^
-
-Since PlatformIO 2.0 you can generate Eclipse compatible project using
-:option:`platformio init --ide` command. Please choose board type using
-:ref:`cmd_boards` command and run:
+Choose board ``ID`` using :ref:`cmd_boards` or `Embedded Boards Explorer <http://platformio.org/boards>`_
+command and generate project via :option:`platformio init --ide` command:
 
 .. code-block:: shell
 
-    platformio init --ide eclipse --board %TYPE%
+    platformio init --ide eclipse --board <ID>
 
-Then import this project via ``File > Import... > General > Existing Projects
-into Workspace > Next`` and specify root directory where is located
-:ref:`projectconf`.
+    # For example, generate project for Arduino UNO
+    platformio init --ide eclipse --board uno
 
-Manual Integration
-^^^^^^^^^^^^^^^^^^
+Then:
 
-More detailed information is located in PlatformIO blog: `Building and debugging Atmel AVR (Arduino-based) project using Eclipse IDE+PlatformIO <http://www.ikravets.com/computer-life/programming/2014/06/20/building-and-debugging-atmel-avr-arduino-based-project-using-eclipse-ideplatformio>`_.
+1. Import this project via
+   ``Menu: File > Import... > General > Existing Projects into Workspace > Next``
+   and specify root directory where is located :ref:`projectconf`
+2. Open source file from ``src`` directory (``*.c, *.cpp, *.ino, etc.``)
+3. Build project using ``Menu: Project > Build Project`` or pre-configured
+   Make Targets (see screenshot below):
 
-`More examples (TI MSP430, TI TIVA, etc.) <https://github.com/platformio/platformio/tree/develop/examples/ide-eclipse>`_
+   + ``PlatformIO: Build`` - Build project without auto-uploading
+   + ``PlatformIO: Clean`` - Clean compiled objects.
+   + ``PlatformIO: Upload`` - Build and upload (if no errors)
+   + ``PlatformIO: Upload using Programmer`` see :ref:`atmelavr_upload_via_programmer`
+   + ``PlatformIO: Upload SPIFFS image`` see :ref:`platform_espressif_uploadfs`
+   + ``PlatformIO: Update platforms and libraries`` - Update installed
+     platforms and libraries via :ref:`cmd_update`
+   + ``PlatformIO: Rebuild C/C++ Project Index`` - Rebuild C/C++ Index for the Project.
+     Allows to fix code completion and code linting issues.
 
-Screenshot
-----------
+If you have some problems with unresolved includes, defines, etc., then
 
-.. image:: ../_static/ide-platformio-eclipse.png
-    :target: http://www.ikravets.com/computer-life/programming/2014/06/20/building-and-debugging-atmel-avr-arduino-based-project-using-eclipse-ideplatformio
+1. Rebuild PlatformIO Project Index:
+   ``PlatformIO: Rebuild C/C++ Project Index`` target
+2. Rebuild Eclipse Project Index: ``Menu: Project > C/C++ Index > Rebuild``
+3. Refresh Project, right click on the project ``Project > Refresh`` (F5) or
+   restart Eclipse IDE.
+
+.. warning::
+    The libraries which are added, installed or used in the project
+    after generating process wont be reflected in IDE. To fix it please run
+    ``PlatformIO: Rebuild C/C++ Project Index`` target and right click on the
+    project and ``Project > Refresh`` (F5).
+
+Live Integration
+----------------
+
+Eclipse Virtual IoT Meetup: `PlatformIO: a cross-platform IoT solution to build them all! <http://www.meetup.com/Virtual-IoT/events/229964142/>`_
+
+.. image:: ../_static/ide-eclipse-virtualiot.jpg
+    :target: https://www.youtube.com/watch?v=6t7UbX812Yw
+
+Articles / Manuals
+------------------
+
+* May 05, 2016 - **Ivan Kravets, Ph.D. / Eclipse Virtual IoT Meetup** - `PlatformIO: a cross-platform IoT solution to build them all! <http://www.meetup.com/Virtual-IoT/events/229964142/>`_
+* Sep 01, 2015 - **Thomas P. Weldon, Ph.D.** - `Improvised MBED FRDM-K64F Eclipse/PlatformIO Setup and Software Installation <http://thomasweldon.com/tpw/courses/embeddsp/p00pcFrdmK64_eclipsePlatformioSetup.html>`_
+* Jul 11, 2015 - **TrojanC** - `Learning Arduino GitHub Repository <http://www.trojanc.co.za/2015/07/11/learning-arduino-github-repository/>`_
+* June 20, 2014 - **Ivan Kravets, Ph.D.** - `Building and debugging Atmel AVR (Arduino-based) project using Eclipse IDE+PlatformIO <http://www.ikravets.com/computer-life/programming/2014/06/20/building-and-debugging-atmel-avr-arduino-based-project-using-eclipse-ideplatformio>`_
+
+See a full list with :ref:`articles`.
+
+Examples
+--------
+
+"Blink" Project
+^^^^^^^^^^^^^^^
+
+Source code of `Eclipse "Blink" Project <https://github.com/platformio/platformio-examples/tree/develop/ide/eclipse>`_.

docs/ide/emacs.rst

@@ -0,0 +1,68 @@
+..  Copyright 2014-present PlatformIO <contact@platformio.org>
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+       http://www.apache.org/licenses/LICENSE-2.0
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+
+.. _ide_emacs:
+
+Emacs
+=====
+
+GNU Emacs is an extensible, customizable text editor - and more. At its core is
+an interpreter for Emacs Lisp, a dialect of the
+`Lisp programming language <http://en.wikipedia.org/wiki/Lisp_programming_language>`_
+with extensions to support text editing.
+
+Refer to the `Emacs Documentation <https://www.gnu.org/software/emacs/#Manuals>`_
+page for more detailed information.
+
+.. image:: ../_static/ide-platformio-emacs.png
+    :target: http://docs.platformio.org/en/stable/_static/ide-platformio-emacs.png
+
+.. contents::
+
+Integration
+-----------
+
+PlatformIO-Mode
+^^^^^^^^^^^^^^^
+
+An Emacs minor mode has been written to facilitate building and uploading from within Emacs.
+It can be installed from the MELPA repository using ``M-x package-install``.
+See the MELPA `Getting Started <https://melpa.org/#/getting-started>`_ page for more information.
+
+Setup instructions and an example config can be found at the `Github page <https://github.com/ZachMassia/platformio-mode>`_.
+
+Code completion can optionally be provided by installing `irony-mode <https://github.com/Sarcasm/irony-mode>`_
+
+
+Project Generator
+^^^^^^^^^^^^^^^^^
+
+Choose board ``ID`` using :ref:`cmd_boards` or `Embedded Boards Explorer <http://platformio.org/boards>`_
+command and generate project via :option:`platformio init --ide` command:
+
+.. code-block:: shell
+
+    platformio init --ide emacs --board <ID>
+
+
+There are 6 predefined targets for building.
+
+* ``platformio_build``  - Build project without auto-uploading.        (``C-c i b``)
+* ``platformio_clean``  - Clean compiled objects.                      (``C-c i c``)
+* ``platformio_upload`` - Build and upload (if no errors).             (``C-c i u``)
+* ``platformio_programmer_upload`` - Build and upload using external programmer (if no errors, see :ref:`atmelavr_upload_via_programmer`). (``C-c i p``)
+* ``platformio_spiffs_upload``  - Upload files to file system SPIFFS (see :ref:`platform_espressif_uploadfs`). (``C-c i s``)
+* ``platformio_update`` - Update installed platforms and libraries.    (``C-c i d``)
+
+.. warning::
+    The libraries which are added, installed or used in the project
+    after generating process wont be reflected in IDE. To fix it you
+    need to reinitialize project using :ref:`cmd_init` (repeat it).

docs/ide/energia.rst

@@ -1,30 +0,0 @@
-.. _ide_energia:
-
-Energia
-=======
-
-The open-source `Energia Software (IDE) <http://energia.nu>`_
-makes it easy to write code and upload it to the board. It runs on *Windows,
-Mac OS X, and Linux*. The environment is written in *Java* and based on
-*Processing* and other open-source software.
-
-This software can be used with:
-
-* :ref:`platform_timsp430`
-* :ref:`platform_titiva`
-* :ref:`framework_energia`
-
-Refer to the `Energia Getting Started <http://energia.nu/guide/>`_
-page for Installation instructions.
-
-Integration
------------
-
-More detailed information is located in PlatformIO blog:
-`Integration of PlatformIO library manager to Energia IDE <http://www.ikravets.com/computer-life/platformio/2014/10/07/integration-of-platformio-library-manager-to-arduino-and-energia-ides>`_.
-
-Screenshot
------------
-
-.. image:: ../_static/ide-platformio-energia.png
-    :target: http://www.ikravets.com/computer-life/platformio/2014/10/07/integration-of-platformio-library-manager-to-arduino-and-energia-ides

docs/ide/netbeans.rst

@@ -0,0 +1,64 @@
+..  Copyright 2014-present PlatformIO <contact@platformio.org>
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+       http://www.apache.org/licenses/LICENSE-2.0
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+
+.. _ide_netbeans:
+
+NetBeans
+========
+
+NetBeans is a Java-based integrated development environment (IDE). It provides
+out-of-the-box code analyzers and editors for working with the latest Java 8
+technologies--Java SE 8, Java SE Embedded 8, and Java ME Embedded 8. The IDE
+also has a range of new tools for HTML5/JavaScript, in particular for Node.js,
+KnockoutJS, and AngularJS; enhancements that further improve its support for
+Maven and Java EE with PrimeFaces; and improvements to PHP and C/C++ support.
+
+NetBeans IDE can be downloaded from `here <https://netbeans.org/downloads/>`_.
+Just make sure you download the C/C++ version (or if you already use NetBeans,
+install the C/C++ development plugins).
+
+.. image:: ../_static/ide-platformio-netbeans.png
+    :target: http://docs.platformio.org/en/stable/_images/ide-platformio-netbeans.png
+
+.. contents::
+
+Integration
+-----------
+
+Choose board ``ID`` using :ref:`cmd_boards` or `Embedded Boards Explorer <http://platformio.org/boards>`_
+command and generate project via :option:`platformio init --ide` command:
+
+.. code-block:: shell
+
+    platformio init --ide netbeans --board <ID>
+
+    # For example, generate project for Arduino UNO
+    platformio init --ide netbeans --board uno
+
+Then:
+
+1. Open this project via ``Menu: File > Open Project...``
+2. Add new files to ``src`` directory (``*.c, *.cpp, *.ino, etc.``) via
+   right-click on ``src`` folder in the "Projects" pane
+3. Build project using ``Menu: Run > Build Project``
+4. Upload firmware using ``Menu: Run > Run Project``
+
+.. warning::
+    The libraries which are added, installed or used in the project
+    after generating process wont be reflected in IDE. To fix it you
+    need to reinitialize project using :ref:`cmd_init` (repeat it).
+
+Articles / Manuals
+------------------
+
+* Feb 22, 2016 - **Grzegorz Hołdys** - `How to Integrate PlatformIO with Netbeans <http://www.instructables.com/id/How-to-Integrate-PlatformIO-With-Netbeans/>`_
+
+See the full list with :ref:`articles`.

docs/ide/qtcreator.rst

@@ -1,3 +1,14 @@
+..  Copyright 2014-present PlatformIO <contact@platformio.org>
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+       http://www.apache.org/licenses/LICENSE-2.0
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+
 .. _ide_qtcreator:
 
 Qt Creator
@@ -5,37 +16,79 @@ Qt Creator
 
 The `Qt Creator <https://github.com/qtproject/qt-creator>`_ is an open source cross-platform integrated development environment. The editor includes such features as syntax highlighting for various languages, project manager, integrated version control systems, rapid code navigation tools and code autocompletion.
 
-This software can be used with:
-
-* all available :ref:`platforms`
-* all available :ref:`frameworks`
-
 Refer to the `Qt-creator Manual <http://doc.qt.io/qtcreator/>`_
 page for more detailed information.
 
+.. image:: ../_static/ide-platformio-qtcreator-7.png
+    :target: http://docs.platformio.org/en/stable/_static/ide-platformio-qtcreator-7.png
+
 .. contents::
 
 Integration
 -----------
 
+.. note::
+    Please verify that folder where is located ``platformio`` program is added
+    to `PATH (wiki) <https://en.wikipedia.org/wiki/PATH_(variable)>`_ environment
+    variable. See FAQ: :ref:`faq_troubleshooting_pionotfoundinpath`.
+
 Project Generator
 ^^^^^^^^^^^^^^^^^
 
-Since PlatformIO 2.0 you can generate Qt Creator compatible project using
-:option:`platformio init --ide` command. Please choose board type using
-:ref:`cmd_boards` command and run:
+Choose board ``ID`` using :ref:`cmd_boards` or `Embedded Boards Explorer <http://platformio.org/boards>`_
+command and generate project via :option:`platformio init --ide` command:
 
 .. code-block:: shell
 
-    platformio init --ide qtcreator --board %TYPE%
+    platformio init --ide qtcreator --board <ID>
 
-Then import this project via ``File > New File or Project > Import Project``
-and specify root directory where is located :ref:`projectconf`.
+    # For example, generate project for Arduino UNO
+    platformio init --ide qtcreator --board uno
 
-After import, we need to delete default build and clean steps and configure project with PlatformIO source code builder (click on Projects label on left menu or ``Ctrl+5`` shortcut):
+Then:
+
+1. Import project via ``File > Open File or Project`` and select
+   ``platformio.pro`` from the folder where is located :ref:`projectconf`
+2. Select default desktop kit and click on ``Configure Project`` (``Projects``
+   mode, left panel)
+3. Set ``General > Build directory`` to the project directory where
+   is located :ref:`projectconf`
+4. Remove all items from ``Build Steps``, click on
+   ``Build Steps > Add Build Step > Custom Process Step`` and set:
+
+   * **Command**: ``platformio``
+   * **Arguments**: ``-f -c qtcreator run``
+   * **Working directory**: ``%{buildDir}``
+
+5. Remove all items from ``Clean Steps``, click on
+   ``Clean Steps > Add Clean Step > Custom Process Step`` and set:
+
+   * **Command**: ``platformio``
+   * **Arguments**: ``-f -c qtcreator run --target clean``
+   * **Working directory**: ``%{buildDir}``
+
+6. Update ``PATH`` in ``Build Environment > PATH > EDIT`` with the result of
+   this command (paste in Terminal):
+
+.. code-block:: shell
+
+    # Linux, Mac
+    echo $PATH
+
+    # Windows
+    echo %PATH%
+
+7. Switch to ``Edit`` mode (left panel) and open source file from ``src``
+   directory (``*.c, *.cpp, *.ino, etc.``)
+8. Build project: ``Menu: Build > Build All``.
 
 .. image:: ../_static/ide-platformio-qtcreator-3.png
-    :target: http://docs.platformio.org/en/latest/_static/ide-platformio-qtcreator-3.png
+    :target: http://docs.platformio.org/en/stable/_static/ide-platformio-qtcreator-3.png
+
+.. warning::
+    The libraries which are added, installed or used in the project
+    after generating process wont be reflected in IDE. To fix it you
+    need to reinitialize project using :ref:`cmd_init` (repeat it).
 
 Manual Integration
 ^^^^^^^^^^^^^^^^^^
@@ -46,16 +99,16 @@ Setup New Project
 First of all, let's create new project from Qt Creator Start Page: ``New Project`` or using ``Menu: File > New File or Project``, then select project with ``Empty Qt Project`` type (``Other Project > Empty Qt Project``), fill ``Name``, ``Create in``.
 
 .. image:: ../_static/ide-platformio-qtcreator-1.png
-    :target: http://docs.platformio.org/en/latest/_static/ide-platformio-qtcreator-1.png
+    :target: http://docs.platformio.org/en/stable/_static/ide-platformio-qtcreator-1.png
 
 On the next steps select any available kit and click Finish button.
 
 .. image:: ../_static/ide-platformio-qtcreator-2.png
 
-Secondly, we need to delete default build and clean steps and configure project with PlatformIO source code builder (click on Projects label on left menu or ``Ctrl+5`` shortcut):
+Secondly, we need to delete default build and clean steps and configure project with PlatformIO Build System (click on Projects label on left menu or ``Ctrl+5`` shortcut):
 
 .. image:: ../_static/ide-platformio-qtcreator-3.png
-    :target: http://docs.platformio.org/en/latest/_static/ide-platformio-qtcreator-3.png
+    :target: http://docs.platformio.org/en/stable/_static/ide-platformio-qtcreator-3.png
 
 Thirdly, change project file by adding path to directories with header files. Please edit project file to match the following contents:
 
@@ -72,7 +125,7 @@ Thirdly, change project file by adding path to directories with header files. Pl
     INCLUDEPATH += "$${HOMEDIR}/.platformio/packages/toolchain-atmelavr/avr/include"
 
 .. image:: ../_static/ide-platformio-qtcreator-4.png
-    :target: http://docs.platformio.org/en/latest/_static/ide-platformio-qtcreator-4.png
+    :target: http://docs.platformio.org/en/stable/_static/ide-platformio-qtcreator-4.png
 
 First program in Qt Creator
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~
@@ -83,7 +136,7 @@ Simple "Blink" project will consist from two files:
 Let's create new text file named ``main.c`` using ``Menu: New File or Project > General > Text File``:
 
 .. image:: ../_static/ide-platformio-qtcreator-5.png
-    :target: http://docs.platformio.org/en/latest/_static/ide-platformio-qtcreator-5.png
+    :target: http://docs.platformio.org/en/stable/_static/ide-platformio-qtcreator-5.png
 
 Copy the source code which is described below to file ``main.c``.
 
@@ -108,33 +161,35 @@ Copy the source code which is described below to file ``main.c``.
 3. Locate the project configuration file named ``platformio.ini`` at the root of the project directory and open it.
 
 .. image:: ../_static/ide-platformio-qtcreator-6.png
-    :target: http://docs.platformio.org/en/latest/_static/ide-platformio-qtcreator-6.png
+    :target: http://docs.platformio.org/en/stable/_static/ide-platformio-qtcreator-6.png
 
 Edit the content to match the code described below.
 
-.. code-block:: none
+.. code-block:: ini
 
-    #
-    # Project Configuration File
-    #
-    # A detailed documentation with the EXAMPLES is located here:
-    # http://docs.platformio.org/en/latest/projectconf.html
-    #
-
-    # A sign `#` at the beginning of the line indicates a comment
-    # Comment lines are ignored.
+    ; PlatformIO Project Configuration File
+    ;
+    ;   Build options: build flags, source filter, extra scripting
+    ;   Upload options: custom port, speed and extra flags
+    ;   Library options: dependencies, extra library storages
+    ;
+    ; Please visit documentation for the other options and examples
+    ; http://docs.platformio.org/en/stable/projectconf.html
 
     [env:arduino_uno]
     platform = atmelavr
     framework = arduino
     board = uno
 
-
 Conclusion
-----------
+~~~~~~~~~~
 
-Taking everything into account, we can build project with shortcut ``Ctrl+Shift+B`` or using ``Menu: Build > Build All``:
+Taking everything into account, we can build project with shortcut ``Ctrl+Shift+B`` or using ``Menu: Build > Build All``.
 
-.. image:: ../_static/ide-platformio-qtcreator-7.png
-    :target: http://docs.platformio.org/en/latest/_static/ide-platformio-qtcreator-7.png
+Examples
+--------
 
+"Blink" Project
+^^^^^^^^^^^^^^^
+
+Source code of `Qt Creator "Blink" Project <https://github.com/platformio/platformio-examples/tree/develop/ide/qtcreator>`_.

docs/ide/sublimetext.rst

@@ -1,3 +1,14 @@
+..  Copyright 2014-present PlatformIO <contact@platformio.org>
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+       http://www.apache.org/licenses/LICENSE-2.0
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+
 .. _ide_sublimetext:
 
 Sublime Text
@@ -5,36 +16,68 @@ Sublime Text
 
 The `Sublime Text <http://www.sublimetext.com/>`_ is a cross-platform text and source code editor, with a Python application programming interface (API). Sublime Text is proprietary software. Its functionality is extendable with plugins. Most of the extending packages have free-software licenses and are community-built and maintained. Sublime Text lacks graphical setting dialogues and is entirely configured by editing text files.
 
-This software can be used with:
-
-* all available :ref:`platforms`
-* all available :ref:`frameworks`
-
 Refer to the `Sublime Text Documentation <http://docs.sublimetext.info/en/latest>`_
 page for more detailed information.
 
+.. image:: ../_static/ide-sublime-text-deviot.gif
+    :target: https://github.com/gepd/Deviot
+
 .. contents::
 
 Integration
 -----------
 
+Deviot Plugin
+^^^^^^^^^^^^^
+
+We are glad to inform you about awesome Sublime Text plugin for IoT development
+named `Deviot <https://github.com/gepd/Deviot>`_. It is based on
+PlatformIO CLI and will automatically install it for you. Please visit `official
+Deviot page <https://github.com/gepd/Deviot>`_ for the further installation
+steps and documentation.
+
+.. image:: ../_static/ide-sublime-text-deviot.gif
+    :target: https://github.com/gepd/Deviot
+
 Project Generator
 ^^^^^^^^^^^^^^^^^
 
-Since PlatformIO 2.0 you can generate Sublime Text compatible project using
-:option:`platformio init --ide` command. Please choose board type using
-:ref:`cmd_boards` command and run:
+Choose board ``ID`` using :ref:`cmd_boards` or `Embedded Boards Explorer <http://platformio.org/boards>`_
+command and generate project via :option:`platformio init --ide` command:
 
 .. code-block:: shell
 
-    platformio init --ide sublimetext --board %TYPE%
+    platformio init --ide sublimetext --board <ID>
 
-Then import this project via ``Project > Open Project...`` and specify root
-directory where is located :ref:`projectconf`.
+    # For example, generate project for Arduino UNO
+    platformio init --ide sublimetext --board uno
+
+Then:
+
+1. Import project via ``Menu: Project > Open Project...`` and select
+   ``platformio.sublime-project`` from the folder where is located :ref:`projectconf`
+2. Select PlatformIO as build system: ``Menu: Tools > Build System > PlatformIO``
+3. Open source file from ``src`` directory (``*.c, *.cpp, *.ino, etc.``)
+4. Build project: ``Menu: Tools > Build``.
+
+Also, you can access to all pre-configured targets via
+``Menu: Tools > Builds With...`` (ST3)
+
++ ``PlatformIO - Build`` - Build project without auto-uploading
++ ``PlatformIO - Clean`` - Clean compiled objects.
++ ``PlatformIO - Upload`` - Build and upload (if no errors)
++ ``PlatformIO - Upload using Programmer`` see :ref:`atmelavr_upload_via_programmer`
++ ``PlatformIO - Upload SPIFFS image`` see :ref:`platform_espressif_uploadfs`
++ ``PlatformIO - Update platforms and libraries`` - Update installed platforms and libraries via :ref:`cmd_update`.
 
 Manual Integration
 ^^^^^^^^^^^^^^^^^^
 
+.. note::
+    Please verify that folder where is located ``platformio`` program is added
+    to `PATH (wiki) <https://en.wikipedia.org/wiki/PATH_(variable)>`_ environment
+    variable. See FAQ: :ref:`faq_troubleshooting_pionotfoundinpath`.
+
 Initial configuration
 ~~~~~~~~~~~~~~~~~~~~~
 
@@ -45,17 +88,17 @@ described below:
 .. code-block:: bash
 
     {
-        "cmd": ["platformio", "--force", "run"],
+        "cmd": ["platformio", "-f", "-c", "sublimetext", "run"],
         "working_dir": "${project_path:${folder}}",
         "variants":
         [
             {
                 "name": "Clean",
-                "cmd": ["platformio", "--force", "run", "--target", "clean"]
+                "cmd": ["platformio", "-f", "-c", "sublimetext", "run", "--target", "clean"]
             },
             {
                 "name": "Upload",
-                "cmd": ["platformio", "--force", "run", "--target", "upload"]
+                "cmd": ["platformio", "-f", "-c", "sublimetext", "run", "--target", "upload"]
             }
         ]
     }
@@ -121,17 +164,16 @@ Let's create new file named ``main.c`` using ``Menu: File > New File`` or shortc
 2. Project Configuration File named ``platformio.ini`` must be located in the project root directory.
 Copy the source code which is described below to it.
 
-.. code-block:: none
+.. code-block:: ini
 
-    #
-    # Project Configuration File
-    #
-    # A detailed documentation with the EXAMPLES is located here:
-    # http://docs.platformio.org/en/latest/projectconf.html
-    #
-
-    # A sign `#` at the beginning of the line indicates a comment
-    # Comment lines are ignored.
+    ; PlatformIO Project Configuration File
+    ;
+    ;   Build options: build flags, source filter, extra scripting
+    ;   Upload options: custom port, speed and extra flags
+    ;   Library options: dependencies, extra library storages
+    ;
+    ; Please visit documentation for the other options and examples
+    ; http://docs.platformio.org/en/stable/projectconf.html
 
     [env:arduino_uno]
     platform = atmelavr
@@ -139,8 +181,14 @@ Copy the source code which is described below to it.
     board = uno
 
 Conclusion
-----------
+~~~~~~~~~~
 
 Taking everything into account, we can open project directory in Sublime Text using ``Menu: File > Open Folder`` and build it with shortcut ``Ctrl+B`` (Windows/Linux) or ``Cmd+B`` (Mac), clean project with shortcut ``F11`` and upload firmware to target with shortcut ``F12``.
 
-.. image:: ../_static/ide-sublime-text-platformio-newproject-5.png
+Examples
+--------
+
+"Blink" Project
+^^^^^^^^^^^^^^^
+
+Source code of `Sublime Text "Blink" Project <https://github.com/platformio/platformio-examples/tree/develop/ide/sublimetext>`_.

docs/ide/vim.rst

@@ -1,3 +1,14 @@
+..  Copyright 2014-present PlatformIO <contact@platformio.org>
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+       http://www.apache.org/licenses/LICENSE-2.0
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+
 .. _ide_vim:
 
 VIM
@@ -7,14 +18,18 @@ VIM
 editor. Vim is designed for use both from a command-line interface and as a
 standalone application in a graphical user interface.
 
-This software can be used with:
+.. image:: ../_static/ide-platformio-vim.png
 
-* all available :ref:`platforms`
-* all available :ref:`frameworks`
+.. contents::
 
 Integration
 -----------
 
+.. note::
+    Please verify that folder where is located ``platformio`` program is added
+    to `PATH (wiki) <https://en.wikipedia.org/wiki/PATH_(variable)>`_ environment
+    variable. See FAQ: :ref:`faq_troubleshooting_pionotfoundinpath`.
+
 Recommended bundles:
 
 * Syntax highlight - `Arduino-syntax-file <https://github.com/vim-scripts/Arduino-syntax-file>`_
@@ -30,17 +45,45 @@ Put to the project directory ``Makefile`` wrapper with contents:
     #PATH := /usr/local/bin:$(PATH)
 
     all:
-        platformio --force run --target upload
+        platformio -f -c vim run
+
+    upload:
+        platformio -f -c vim run --target upload
 
     clean:
-        platformio --force run --target clean
+        platformio -f -c vim run --target clean
+
+    program:
+        platformio -f -c vim run --target program
+
+    uploadfs:
+        platformio -f -c vim run --target uploadfs
+
+    update:
+        platformio -f -c vim update
+
+
+Pre-defined targets:
+
++ ``Build`` - Build project without auto-uploading
++ ``Clean`` - Clean compiled objects.
++ ``Upload`` - Build and upload (if no errors)
++ ``Upload using Programmer`` see :ref:`atmelavr_upload_via_programmer`
++ ``Upload SPIFFS image`` see :ref:`platform_espressif_uploadfs`
++ ``Update platforms and libraries`` - Update installed platforms and libraries via :ref:`cmd_update`.
 
 
 Now, in VIM ``cd /path/to/this/project`` and press ``Ctrl+B`` or ``Cmd+B``
 (Mac). *PlatformIO* should compile your source code from the ``src`` directory,
 make firmware and upload it.
 
-Screenshot
-----------
+.. note::
+    If hotkey doesn't work for you, try to add this line
+    ``nnoremap <C-b> :make<CR>`` to ``~/.vimrc``
 
-.. image:: ../_static/ide-platformio-vim.png
+Articles / Manuals
+------------------
+
+* `コマンドラインでArduino開発 : vim + platformio (Arduino development at the command line: VIM + PlatformIO, Japanese) <http://qiita.com/caad1229/items/7b5fb47f034ae6e0baf2>`_
+
+See a full list with :ref:`articles`.

docs/ide/visualstudio.rst

@@ -1,3 +1,14 @@
+..  Copyright 2014-present PlatformIO <contact@platformio.org>
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+       http://www.apache.org/licenses/LICENSE-2.0
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+
 .. _ide_visualstudio:
 
 Visual Studio
@@ -5,32 +16,46 @@ Visual Studio
 
 The `Microsoft Visual Studio (Free) <http://visualstudio.com/free>`_ is an integrated development environment (IDE) from Microsoft. Visual Studio includes a code editor supporting IntelliSense (the code completion component) as well as code refactoring.
 
-This software can be used with:
-
-* all available :ref:`platforms`
-* all available :ref:`frameworks`
-
 Refer to the `Visual Studio Documentation <https://msdn.microsoft.com/library/vstudio>`_
 page for more detailed information.
 
+.. image:: ../_static/ide-vs-platformio-newproject-8.png
+    :target: http://docs.platformio.org/en/stable/_static/ide-vs-platformio-newproject-8.png
+
 .. contents::
 
 Integration
 -----------
 
+.. note::
+    Please verify that folder where is located ``platformio`` program is added
+    to `PATH (wiki) <https://en.wikipedia.org/wiki/PATH_(variable)>`_ environment
+    variable. See FAQ: :ref:`faq_troubleshooting_pionotfoundinpath`.
+
 Project Generator
 ^^^^^^^^^^^^^^^^^
 
-Since PlatformIO 2.0 you can generate Visual Studio compatible project using
-:option:`platformio init --ide` command. Please choose board type using
-:ref:`cmd_boards` command and run:
+Choose board ``ID`` using :ref:`cmd_boards` or `Embedded Boards Explorer <http://platformio.org/boards>`_
+command and generate project via :option:`platformio init --ide` command:
 
 .. code-block:: shell
 
-    platformio init --ide visualstudio --board %TYPE%
+    platformio init --ide sublimetext --board <ID>
 
-Then import this project via ``File->Open->Project/Solution`` and specify root
-directory where is located :ref:`projectconf`.
+    # For example, generate project for Arduino UNO
+    platformio init --ide visualstudio --board uno
+
+Then:
+
+1. Import this project via ``Menu: File > Open > Project/Solution``
+   and specify root directory where is located :ref:`projectconf`
+2. Open source file from ``src`` directory (``*.c, *.cpp, *.ino, etc.``)
+3. Build project: ``Menu: Build > Build Solution``.
+
+.. warning::
+    The libraries which are added, installed or used in the project
+    after generating process wont be reflected in IDE. To fix it you
+    need to reinitialize project using :ref:`cmd_init` (repeat it).
 
 Manual Integration
 ^^^^^^^^^^^^^^^^^^
@@ -42,7 +67,7 @@ First of all, let's create new project from Visual Studio Start Page: ``Start >
 
 .. image:: ../_static/ide-vs-platformio-newproject.png
 
-Secondly, we need to configure project with PlatformIO source code builder:
+Secondly, we need to configure project with PlatformIO Build System:
 
 .. image:: ../_static/ide-vs-platformio-newproject-2.png
 
@@ -68,14 +93,14 @@ First program in Visual Studio
 
 Simple "Blink" project will consist from two files:
 
-1. Main "C" source file named ``main.c`` must be located in the ``src`` directory.
-Let's create new file named ``main.c`` using ``Menu: File > New File`` or shortcut ``Ctrl+N``:
+1. Main "C++" source file named ``main.cpp`` must be located in the ``src`` directory.
+Let's create new file named ``main.cpp`` using ``Menu: File > New File`` or shortcut ``Ctrl+N``:
 
 .. image:: ../_static/ide-vs-platformio-newproject-6.png
 
-Copy the source code which is described below to file ``main.c``.
+Copy the source code which is described below to file ``main.cpp``.
 
-.. code-block:: c
+.. code-block:: cpp
 
     #include "Arduino.h"
     #define WLED    13  // Most Arduino boards already have an LED attached to pin 13 on the board itself
@@ -99,17 +124,16 @@ Copy the source code which is described below to file ``main.c``.
 
 Copy the source code which is described below to it.
 
-.. code-block:: none
+.. code-block:: ini
 
-    #
-    # Project Configuration File
-    #
-    # A detailed documentation with the EXAMPLES is located here:
-    # http://docs.platformio.org/en/latest/projectconf.html
-    #
-
-    # A sign `#` at the beginning of the line indicates a comment
-    # Comment lines are ignored.
+    ; PlatformIO Project Configuration File
+    ;
+    ;   Build options: build flags, source filter, extra scripting
+    ;   Upload options: custom port, speed and extra flags
+    ;   Library options: dependencies, extra library storages
+    ;
+    ; Please visit documentation for the other options and examples
+    ; http://docs.platformio.org/en/stable/projectconf.html
 
     [env:arduino_uno]
     platform = atmelavr
@@ -118,9 +142,36 @@ Copy the source code which is described below to it.
 
 
 Conclusion
-----------
+~~~~~~~~~~
 
-Taking everything into account, we can build project with shortcut ``Ctrl+Shift+B`` or using ``Menu: Build > Build Solution``:
+Taking everything into account, we can build project with shortcut ``Ctrl+Shift+B`` or using ``Menu: Build > Build Solution``.
 
-.. image:: ../_static/ide-vs-platformio-newproject-8.png
-    :target: http://docs.platformio.org/en/latest/_static/ide-vs-platformio-newproject-8.png
+Examples
+--------
+
+"Blink" Project
+^^^^^^^^^^^^^^^
+
+Source code of `Visual Studio "Blink" Project <https://github.com/platformio/platformio-examples/tree/develop/ide/visualstudio>`_.
+
+Known issues
+------------
+
+IntelliSense Errors
+^^^^^^^^^^^^^^^^^^^
+
+VS Studio does not allow to specify for project other toolchain which will
+be used by IntelliSense. In this case, IntelliSense does not understand
+GCC-specific definitions.
+
+However, these errors does not have any influence on PlatformIO Build
+System. It means that you can ignore them and rely on PlatformIO Build System
+messages which will be shown in output console after build.
+
+Nevertheless, you can provide an IntelliSense-friendly definition of problematic
+GCC constructs and make sure that the GCC will ignore such definitions or
+disable IntelliSense error reporting at all.
+See details in `issue #543 <https://github.com/platformio/platformio/issues/543>`_
+
+.. image:: ../_static/ide-vs-platformio-newproject-9.png
+    :target: http://docs.platformio.org/en/stable/_static/ide-vs-platformio-newproject-9.png