If we're on an x64 CPU that doesn't have the MOVBE extension, trying to
SwapAndStore a host register results in that register's value getting
clobbered with the swapped value. Jit64::stX and Jit64::stXx detect this
case, and if necessary, emit a MOV to a register that's fine to clobber.
This logic was broken by the merge of PR 12134. Jit64::stX and
Jit64::stXx were assuming that if RegCache::IsImm returns true for a
guest register, calling RegCache::Use or RegCache::BindOrImm for that
guest register would result in an immediate. However, PR 12134 made it
possible for a guest register to have both a host register and an
immediate in the register cache at the same time. When this happens,
RegCache::IsImm returns true, yet RegCache::Use and RegCache::BindForImm
return an RCOpArg whose Location returns a host register. (To make it
extra confusing, RCOpArg::IsImm calls RegCache::IsImm if the RCOpArg
came from RegCache, so RCOpArg::IsImm returns true!)
To fix this, in cases where Jit64::stX and Jit64::stXx explicitly need
an immediate to avoid having to emit an extra MOV, let's call
RegCache::Imm32 so that we're certain that we're getting an immediate.
This fixes an issue on older x64 CPUs that manifested as e.g. completely
broken graphics in Spyro: Enter the Dragonfly.
Recently came across a strange issue where Dolphin would hard crash in most games with this error:
```sh
/usr/include/c++/15.2.1/optional:1165: constexpr const _Tp* std::optional<_Tp>::operator->() const [with _Tp = InputCommon::ImagePixelData]: Assertion 'this->_M_is_engaged()' failed.
```
The culprit turned out to be accessing `host_key_image` which is an `std::optional` thay may return `std::nullopt`. I'm not sure why this issue started occuring for me since I've had no issue with my Dynamic Input Textures in the past? But this fixes a crash if the image fails to load.
Aside from being unnecessary, on Windows the flag prevents two instances
of Dolphin (one instance from before 2509-371 when the flag was
introduced and the other after) from running the same ROM
simultaneously.
Attempting to do so generated the false error `"[Rom]" is an invalid
GCM/ISO file, or is not a GC/Wii ISO.` followed by `Failed to init core`
and emulation shutdown on the second instance to start the game. Fixing
the incorrect error message is a task I'm deferring to another PR.
The problem didn't happen when both instances were 2509-371 or later,
but I ran into it while bisecting an issue and it'd be nice to avoid
that problem in the future.
We have an optimization where the guest carry flag is kept in the host
carry flag between certain back-to-back pairs of integer instructions.
If the second instruction falls back to the interpreter, then
FallBackToInterpreter should flush the carry flag to m_ppc_state,
otherwise the interpreter reads a stale carry flag and at some later
point Jit64 trips the "Attempt to modify flags while flags locked!"
assertion.
An alternative solution would be to not store the guest carry flag in
the host carry flag to begin with if we know the next instruction is
going to fall back to the interpreter, but knowing that in advance is
non-trivial. Since interpreter fallbacks aren't exactly intended to be
super optimized, I went for the flushing solution instead, which is how
JitArm64 already works. In most cases, the emitted code shouldn't even
differ between these two solutions.
Note that the problematic situation only happens if the first integer
instruction doesn't fall back to the interpreter but the second one
does. This used to be impossible because there's no "JIT disable"
setting that's granular enough to disable some integer instructions but
not all, but with the constant propagation PR, it's possible if constant
propagation is able to entirely evaluate the first instruction but not
the second.
Call `UseNoImm` instead of `Use` on parameter `a` of `MultiplyImmediate`
since `Ra` gets passed to `IMUL` which asserts that parameter is not an
immediate.
This fixes a build error when `-DENABLE_TESTS=ON` and `-DUSE_RETRO_ACHIEVEMENTS=OFF` are both set together, since AchievementManager is also behind an ifdef.
This is a follow-up to 0f1ecf41f9. Our policy is to use three-character
game INIs for settings unless a game has multiple releases and the
setting shouldn't be applied to all of them.
SAHE69.ini was simply renamed to SAH.ini. RL6E69.ini was deleted
entirely, because RL6.ini already exists and contains the same setting.
There was a LINUX check added in b3bdad4, but this should be removed as this change applies to all Qt supported platforms. Simply put, GuiPrivate CMake files were introduced in Qt 6.9 and are now enforced in Qt 6.10 and are not platform-dependent.
Having it be static leads to a race condition if two different threads
call RunOnCPUThread with wait_for_completion set to true. (There's
currently nobody calling RunOnCPUThread from anything other than the
host thread, so this hasn't led to any consequences yet.)
This is an Android port of 7ed61c50a1. It looks like we don't have
descriptions for any of the RetroAchievements settings in the Android
GUI, so I haven't added descriptions for these two new settings either.
LoginDialog sets these to gone when a login starts or fails. Whether we
use gone or invisible needs to be consistent between LoginDialog and the
XML file, otherwise we'll blank space that shows up or disappears when
login starts or fails.
The cpp-ipc dependency was included in #13870; it was overlooked that
`install()` commands in the library would lead to ancillary files being
installed along side Dolphin on Linux.
`EXCLUDE_FROM_ALL` is now set in the `add_subdirectory()` call to
prevent cpp-ipc from being part of the installation.
In particular, the following files should no longer be seen in the build
logs or in the final builds:
```
-- Installing: /app/include/libipc
-- Installing: /app/include/libipc/condition.h
-- Installing: /app/include/libipc/buffer.h
-- Installing: /app/include/libipc/export.h
-- Installing: /app/include/libipc/def.h
-- Installing: /app/include/libipc/rw_lock.h
-- Installing: /app/include/libipc/shm.h
-- Installing: /app/include/libipc/mutex.h
-- Installing: /app/include/libipc/pool_alloc.h
-- Installing: /app/include/libipc/ipc.h
-- Installing: /app/include/libipc/semaphore.h
-- Installing: /app/lib/libipc.a
-- Installing: /app/share/cpp-ipc/cpp-ipc-targets.cmake
-- Installing: /app/share/cpp-ipc/cpp-ipc-targets-release.cmake
-- Installing: /app/share/cpp-ipc/cpp-ipc-config.cmake
-- Installing: /app/share/cpp-ipc/cppIpcConfigVersion.cmake
```
In 405baed805, we made the assumption that whether OpenAndroidContent
is able to create a new file depends on the open mode, the document
provider, and the positions of the celestial bodies. However, I'm
fairly sure that it can't create files at all as currently implemented.
First, ContentResolver.openFileDescriptor is documented as throwing
FileNotFoundException if the file doesn't exist. Now, the SAF
documentation is notoriously unreliable on matters like these, and
document providers can do whatever they want anyway, so we can't
actually trust this to mean that FileNotFoundException will always
be thrown if the file doesn't exist. But second, the Dolphin function
ContentHandler.unmangle is also unable to handle files that don't
already exist (unless the passed-in URI isn't mangled to begin with,
but to the best of my knowledge, there's no way to get a non-mangled URI
for a file that doesn't exist (unless you make assumptions about how the
document provider's URI scheme works, which we don't do in Dolphin)).
Summed up, it looks a lot like OpenAndroidContent can't create files,
or at the very least can't do so reliably.
Therefore I'm making DirectIOFile throw an assertion and return false
in situations where it's being asked to create a file under SAF. For
reference, there's no code in Dolphin that actually tries to create a
file under SAF. In all instances where we use SAF to write to files, the
file is created by the system file picker before it returns the URI of
the file to us.
What does this change gain us? First, if someone in the future tries to
use DirectIOFile to create a file under SAF, they'll be immediately
informed that this isn't supported rather than discovering it doesn't
work and chalking it up to SAF being bad for unpredictable reasons.
Second, we get rid of a call to File::Exists, which is a notable
performance improvement for game list scanning due to SAF and Dolphin's
"unmangling" being bad for reasons that unfortunately are entirely
predictable to those of us who have stared into the SAF void.
I've tested that game list scanning and game conversion still works.
These settings were recently changed with 113c86f1b4 to be floats instead of ints.
This commit also changes the Android UI to use the direct convergence value instead of the percentage to match the Qt UI.
When BindToRegister is called, the register cache marks the relevant
guest register as no longer containing an immediate. However, subfcx was
calling GetImm after BindToRegister. This led to a lot of panic alerts
after 2995aa5be4 added an assert to GetImm to check that the passed-in
register is an immediate.
Both before and after 2995aa5be4, the actual value of the immediate
wasn't overwritten by BindForRegister, only the fact that the register
is an immediate. Because of this, the emitted code happened to work
correctly.
If the build is an Android build, identify it as such in the AchievementManager user agent so that android builds can be tracked separately for debug purposes.
We were previously excluding this folder from Android builds because it
didn't contain any files that were used on Android. However, we now have
an OSD font file that we do want to use on Android, and there's also a
few PNG files that will be needed by the RetroAchievements integration.
In terms of file size, this is what gets added:
OSD font: 48.1 KiB
RetroAchievements graphics: 3.5 KiB
Unused graphics: 116.8 KiB
We're still excluding Sys/Themes/, which is 1.1 MiB and entirely unused.
Like Jit64, JitArm64 now keeps track of the location of a guest register
using three booleans: Whether it is in ppcState, whether it is in a host
register, and whether it is a known immediate. The RegType enum remains
only for the purpose of keeping track of what format FPRs are stored in
in host registers.
Like the previous commit did for Jit64, JitArm64 can now handle the
combination of a value simultaneously being in a host register and being
a known immediate.
Unlike with Jit64, I've put the codegen-affecting changes in this commit
and the move away from the RegType enum in a follow-up commit. This is
in part because the design of JitArm64 made it easy to implement the
codegen-affecting changes without combining it with a big bang
refactorization, and in part because we need to keep RegType around for
keeping track of different float formats in Arm64FPRCache, complicating
the refactorization a bit.
They're now stored in ConstantPropagation instead.
I've also removed the LocationType enum. The location of each guest
register is now tracked using three booleans: Whether it is in ppcState,
whether it is in a host register, and whether it is a known immediate.
The first two of these booleans are stored in the register cache, and
the last one is stored in ConstantPropagation. This new model allows us
to handle the combination of a value simultaneously being in a host
register and being a known immediate. It also keeps track of which
registers are dirty, which was previously kept track of in X64CachedReg.
The old model maps to the new model as follows:
default host_reg immediate
Default true false false
Discarded false false false
Bound (!dirty) true false
Immediate false false true
SpeculativeImmediate true false true
[previously unrepresentable] (!dirty) true true
This commit makes the JIT set/clear the individual registers of
ConstantPropagation immediately instead of at the end of the
instruction. This is needed to prevent Jit64::ComputeRC, which reads
from a register written to earlier during the same instruction, from
reading back stale register values from ConstantPropagation in the next
commit.
To find out whether a host register needs to be unlocked, FlushRegisters
checks if the guest register is known to be a zero immediate. This works
right now, but it will stop working correctly once we gain the ability
to have a guest register be a known immediate and be in a host register
at the same time, because a register that's known to be a zero immediate
may have had a host register allocated prior to the call to
FlushRegisters. Instead, we should check whether the register is
RegType::Register after we're done calling BindForRead.
Restructuring things in this way brings two immediate benefits:
* Code is deduplicated between Jit64 and JitArm64.
* Materializing an immediate value in a register no longer results in us
forgetting what the immediate value was.
As a more long-term benefit, this lets us also run constant propagation
as part of PPCAnalyst, which could let us do cool stuff in the future
like statically determining whether a conditional branch will be taken.
But I have nothing concrete planned for that right now.
Sliders can trigger change listeners very rapidly, so let's add some
rate limiting so dragging a slider doesn't cause the whole UI to lag.
(Now the input overlay looks laggy when dragging a slider, though.)
In the dialog where you can choose what controller the input overlay
should be controlling, there's an OK button. If you change controller
but don't press OK, your selection will be saved, but the input overlay
won't refresh to show the new controller unless you perform some other
action that would cause it to refresh. This is not good UX.
This commit changes the behavior not only of this dialog but also other
dialogs spawned by EmulationActivity so that everything is properly
updated when dismissing a dialog, as if you had pressed OK.
warning: definition of implicit copy constructor for 'BitField<2, 2, ColorChannel>' is deprecated because it has a user-declared copy assignment operator [-Wdeprecated-copy]
Redundant access specifier has the same accessibility as the previous access specifier.
this line:
- --filesystem=xdg-run/app/com.discordapp.Discord:create
specifically targets the flatpak version of discord, so anyone using the native package wouldnt get rich presence
Fusion is one of the built-in styles that Qt ships with, and that is
generally supported in all platforms and handles custom color palettes
properly.
The color palettes have been borrowed from the Dolphin Memory Engine
buddy application.
The new styles are:
- **Fusion Light**
- **Fusion Dark Gray**
- **Fusion Dark**
A demo of each style on Windows:
| System | Light | Dark | Fusion Light | Fusion Dark Gray | Fusion Dark |
| ------ | ----- | ---- | ------------ | ---------------- | ----------- |
| <img width="1920" height="1080" alt="Dolphin Emulator System style" src="https://github.com/user-attachments/assets/7f55a19d-d9a1-43d1-a435-1e1d5b29abe2" /> | <img width="1920" height="1080" alt="Dolphin Emulator Light style" src="https://github.com/user-attachments/assets/4c70f2f9-16b8-4777-b72b-55b2dffcd1e4" /> | <img width="1920" height="1080" alt="Dolphin Emulator Dark style" src="https://github.com/user-attachments/assets/5e669477-d2a5-4d19-b2c5-a2ed9bb1e6fe" /> | <img width="1920" height="1080" alt="Dolphin Emulator Light Fusion style" src="https://github.com/user-attachments/assets/b1f95c47-0691-4809-bd74-99e913c17684" /> | <img width="1920" height="1080" alt="Dolphin Emulator Dark Gray Fusion style" src="https://github.com/user-attachments/assets/c9d30aa3-f941-4fc5-806f-d3fbd2cae0cc" /> | <img width="1920" height="1080" alt="Dolphin Emulator Dark Fusion style" src="https://github.com/user-attachments/assets/123d2125-e126-4e8c-aa42-793ded8ffacc" /> |
> [!NOTE]
> Notice that the **Light** and **Dark** styles remain available only on
> Windows due to limitations on how styles in the various platforms
> handle (or mishandle) custom color palettes.
> [!IMPORTANT]
> Due to [`KDE-511547`](https://bugs.kde.org/show_bug.cgi?id=511547),
> after having used Breeze (default style in Plasma systems), top tool
> bars in tools areas will lose their correct background color; a
> restart will be required in order to get the updated color in the main
> window.
>
> UPDATE: The issue has been fixed upstream and should be available in
> KDE Plama 6.5.3 and newer.
extractNativeLibs is deprecated. Native lib packaging is already controlled by
packaging.jniLibs.useLegacyPackaging (which we already have), so the manifest override is unnecessary.
The core no longer cares which thread is the host thread.
Cleaning up Android's HostThreadLock is left for another PR, in part
because the HostThreadLock in NativeConfig.cpp still serves a purpose,
and in part to make any issues easier to bisect.
By letting threads other than the host thread use things like
CPUThreadGuard, we can do a significant cleanup in AchievementsManager
in a later commit of this pull request.
Note: Some functions still can't be called from the CPU thread (or
threads the CPU thread might block on, like the GPU thread), but can
be called from any other thread.
The bug in CVE-2025-0665 causes crashes on Android 11 and above, as the default fdsan behavior was changed to abort when a violation is found.
While curl 8.17.0 is the latest release, we can't upgrade to it right now due to mbedtls 2.28.0 (which we are currently using) being incompatible with it.
Co-Authored-By: OatmealDome <OatmealDome@users.noreply.github.com>
Tapping outside the System Update dialog would previously close it and leave the update in a partially canceled, inconsistent state. This change disables outside-touch dismissal to avoid accidental interruptions and ensure the process completes cleanly.
If bind was called more than once for a SwitchSettingViewHolder, the
line `binding.settingSwitch.isChecked = setting.isChecked` would
accidentally trigger the listener registered during the previous bind
call.
Trigraphs support is generally disabled by default, but some compilers
(e.g. GCC) may still warn when one hypothetical trigraph is encountered.
For example, one of these warnings was introduced as part of #14067:
```
.../Source/Core/DolphinQt/MainWindow.cpp:1433:77: warning: trigraph ??) ignored, use -trigraphs to enable [-Wtrigraphs]
1433 | this, tr("Select a File"), dialog_path, tr("All Save States (*.sav *.s??);; All Files (*)"));
|
.../Source/Core/DolphinQt/MainWindow.cpp:1445:77: warning: trigraph ??) ignored, use -trigraphs to enable [-Wtrigraphs]
1445 | this, tr("Select a File"), dialog_path, tr("All Save States (*.sav *.s??);; All Files (*)"));
|
```
The warning is generally not interesting and has been disabled now.
We can now route Android analytics through Common::HttpAnalyticsBackend, drop the Volley sender, and keep the JNI layer limited to only transfer metadata since https://bugs.dolphin-emu.org/issues/11772 has been fixed.
Push and wait on WorkQueueThread items using PushBlocking. Previously we
created a Common::Event sync_event on the caller's stack, called Wait on
it, then had the WorkQueueThread call Set on the sync_event once the
thread was done.
In addition to being simpler the new way avoids a use-after-free that
could happen in convoluted and unlikely yet possible thread scheduling
sequences.
One such case can be triggered as follows:
* Set your audio backend to Cubeb
* In CubebStream::SetVolume set a breakpoint at the call to Wait and at
the call to cubeb_stream_set_volume.
* Start a game.
* Continue until the Cubeb Worker thread hits the
cubeb_stream_set_volume breakpoint and Emuthread hits the Wait
breakpoint, freezing each thread when it hits its breakpoint.
* Unfreeze Cubeb Worker.
* In Event::Set set a breakpoint at the end of the scope containing the
lock_guard such that the guard has been constructed but not destructed
when the breakpoint is hit.
* Continue until that breakpoint is hit by Cubeb Worker. If other
threads hit it first keep going.
* Freeze Cubeb Worker.
* For convenience remove the breakpoint in Event::Set so other threads
don't trigger it.
* In CubebStream::SetRunning set a breakpoint at the call to Wait.
* Unfreeze Emuthread and continue until the breakpoint is hit.
* In Cubeb Worker go to Event::Set and examine the values of m_mutex's
member variables. In Visual Studio Debug these are locking_thread_id
== 0xcccccc01 and ownership_levels == 0xcccccccc. This is the result
of Visual Studio overwriting the memory used on the stack by
sync_event in CubebStream::SetVolume with cc bytes to represent
uninitialized memory on the stack (since that function already
returned), and then allocating enough memory on the stack when calling
AudioCommon::SetSoundStreamRunning and then CubebStream::SetRunning
that it overwrote one byte of the memory formerly occupied by
locking_thread_id.
* If you unfreeze Cubeb Worker at this point it will trigger the lock
guard's destructor which will then try to unlock m_mutex. Since
m_mutex is no longer in scope this is a use-after-free, and in VS
debug triggers a debug assert due to locking_thread_id not matching
the current thread id.
Displays a different message at game launch if RetroAchievements fails specifically due to an invalid or expired API token, instructing the player to log back in with the game closed.
When the interpreter calls MSRUpdated, we should update the membase
variable. Not because the interpreter itself needs it, but because the
JIT needs it if it's falling back to the interpreter for an instruction
that sets the MSR.
Additionally, the JIT's FallBackToInterpreter needs to read back the new
membase value afterwards.
This fixes games crashing on JitArm64 if mtmsr is set to fall back to
interpreter. I was unable to reproduce the issue on Jit64, presumably
due to a fortunate series of coincidences (instructions that set MSR are
always followed by an exception exit, and
PowerPCManager::CheckExternalExceptions was always calling
JitInterface::UpdateMembase, and Jit64::WriteExceptionExit was always
calling Jit64::EmitUpdateMembase.)
In a few places in Dolphin, we're using BottomSheetDialogFragments.
These unhelpfully tend to start out in a "collapsed" state when in
landscape mode (presumably depending on factors like screen size). The
user then has to manually expand them before they can meaningfully
interact with them.
We've been automatically setting BottomSheetDialogFragments to the
expanded state if the device Dolphin is running on doesn't support
touch, since with d-pad navigation it's impossible to expand these
sheets. But I think we should set them to expanded on devices that
support touch too. I haven't encountered a single case where you can do
anything useful with any of Dolphin's BottomSheetDialogFragments while
they're collapsed, so the user always has to expand sheets manually if
they start out collapsed. And just because a device supports touch
doesn't necessarily mean you're interacting with it through the touch
screen right now - you could be using a gamepad, for instance.
Remove "env, " from "return env, GetControlPointer..." since the left
side of a comma operator has no effect.
This was presumably a copy/paste error from the function above it.
This is a hassle-free BBA option intended for local play with multiple
Dolphin instances running *in the same system*. After selecting
**Broadband Adapter (IPC)** in the **SP1** slot in the GameCube section
in the settings, games that support LAN play will be able to discover
each other, without requiring third-party software or relatively complex
TAP setups.
The implementation is based on cpp-ipc, a high-performance inter-process
communication library that uses shared memory as transport layer.
Supported platforms are:
- [x] Linux
- [x] Windows
- [ ] macOS (cpp-ipc does not support this platform)
- [ ] FreeBSD (cpp-ipc does not support this platform)
- [ ] Android (cpp-ipc needs some adjustments; while it could work,
launching two Dolphin instances within the same Android system may be
both challenging and impractical)
PauseAndLock is now only called with do_lock=true, and unpause_on_unlock
only ever was used when do_lock is false (which is now handled in
RestoreStateAndUnlock instead), so both parameters are unnecessary.
Replace calls of PauseAndLock(do_lock=false) with new function
RestoreStateAndUnlock for clarity.
Callers of PauseAndLock ignored the return value when do_lock is
false, so RestoreStateAndUnlock doesn't need to return anything.
RestoreStateAndUnlock was only called with control_adjacent=true. Remove
the parameter and unconditionally call the function that was gated
behind it being true.
CPUManager::PauseAndLock is now only called with do_lock=true, and
unpause_on_unlock only ever was used when do_lock is false (which is now
handled in RestoreStateAndUnlock instead), so both parameters are
unnecessary.
Replace call of CPUManager::PauseAndLock(do_lock=false) with new
function RestoreStateAndUnlock for clarity.
Callers of Core::PauseAndLock ignore the return value when do_lock is
false, so in that case was_unpaused in Core::PauseAndLock doesn't need
to be set and so RestoreStateAndUnlock doesn't need to return anything.
Make s_have_fake_cpu_thread a class member instead. In addition to
getting rid of a bit of static state, this simplifies refactoring in an
upcoming commit.
OProfile is not used at all these days, most major distributions do not ship it anymore (Debian, Fedora, and Alpine to name the few I've checked) and following a discussion on Discord, nobody is apparently using it, most devs not even being aware of it. This removes an optional dependency from Dolphin.
Allow loading a custom font by naming it OSD_Font.ttf and placing the file in the User/Load folder, to load that font instead. Useful for future testing.
Don't log a warning in GetPropertyHelper when the property isn't
present. The function returns an optional, so any callers that want to
log a warning when nullopt is returned can do so themselves.
This prevents plugged-in devices (an Xbox One controller in my case)
from spamming the message "W[COMMON]: CM_Get_DevNode_Property returned:
37" twice per second (that value being CR_NO_SUCH_VALUE).
Added some new visibility toggles so players can choose what to show (or hide) during their RetroAchievements runs:
Toggle for the Speedrun Leaderboards timer
Toggle for Achievement Challenge badges
Check if the return value of std::filesystem::remove_all is -1 rather
than 0; the former is the specified return value if there's an error
while 0 just means the directory already didn't exist (which is the end
result we want).
Previously error messages such as the following were possible:
E[COMMON]: DeleteDirRecursively: [path]/User/RedirectSession/ failed The
operation completed successfully.
Also adds a period in the error string to make it look nicer.
Rename m_session to m_last_value_session to better reflect its meaning
and distinguish it from m_current_value_session which will be introduced
in another commit.
macOS does not support `SO_PRIORITY` on sockets, but it does apparently
support configuring sockets with a priority flag via a parameter called
`SO_NET_SERVICE_TYPE`. It doesn't appear to be especially well
documented, but it seems to exist as far back as 10.11 (El Capitan).
This patch sets QoSSession to treat connections as
"responsive multimedia audio/video", which some docs appear to describe
as "low delay tolerant, low-medium, loss tolerant, elastic flow,
variable packet interval, rate and size".
Preserve the configured logging verbosity unless the user actually
changes it, rather than capping it to LINFO on release builds.
Rename LogManager::m_level to m_effective_level and distinguish between
the config and effective level in various function/variable names.
Make m_effective_level atomic to prevent data races when setting the
effective log level from the config changed callback.
USBDevicePicker: Modify USBDeviceAddToWhitelistDialog to be more generic, and use it for a new "More Options..." selection in Bluetooth Passthrough adapters
The `QtUtils::AdjustSizeWithinScreen()` function now centers the
widget on their parent window after the widget's size is adjusted. This
is required in some desktop environments (generally on Linux systems) to
ensure that the just-resized widget remains aligned with its parent
window.
The creation of the **Cheats Manager** dialog is now deferred to first
show, as creating it within the main window's constructor prevents the
dialog from knowing the real position of its parent window, which is
only properly calculated on first show.
For the same reasons, the analytics prompt is now shown only when the
application is ready (i.e. when the main window has been shown).
| Before | After |
| ------ | ----- |
| <img width="1920" height="1080" alt="[Dolphin Emulator] Misplaced analytics prompt" title="[Dolphin Emulator] Misplaced analytics prompt" src="https://github.com/user-attachments/assets/c3e43b3b-cf79-4398-b531-7de6068c583e" /> | <img width="1920" height="1080" alt="[Dolphin Emulator] Centered analytics prompt" title="[Dolphin Emulator] Centered analytics prompt" src="https://github.com/user-attachments/assets/a10d06d9-7438-4032-b96c-dfcb48826349" /> |
| <img width="1920" height="1080" alt="[Dolphin Emulator] Misplaced Settings dialog" title="[Dolphin Emulator] Misplaced Settings dialog" src="https://github.com/user-attachments/assets/f35b10ee-4f07-48d4-86f9-2537ad5ca7ca" /> | <img width="1920" height="1080" alt="[Dolphin Emulator] Centered Settings dialog" title="[Dolphin Emulator] Centered Settings dialog" src="https://github.com/user-attachments/assets/33e37237-77a4-44f6-a0e2-b709f65b672b" /> |
| <img width="1920" height="1080" alt="[Dolphin Emulator] Misplaced Cheats Manager dialog" title="[Dolphin Emulator] Misplaced Cheats Manager dialog" src="https://github.com/user-attachments/assets/1fbd3836-5639-4d5a-b57e-e2e21f21c9db" /> | <img width="1920" height="1080" alt="[Dolphin Emulator] Centered Cheats Manager dialog" title="[Dolphin Emulator] Centered Cheats Manager dialog" src="https://github.com/user-attachments/assets/3f2b1b50-de16-49b7-bac4-c444c6cab0bc" /> |
Avoid creating and then destroying a leaderboard list when game is null,
as doing so causes an access to uninitialized memory due to a bug in
rcheevos.
This can be triggered by starting a game with an invalid or expired
login token.
Without cache emulation, these instructions are functionally identical.
In the interpreter, their only difference is related to HID registers checks, which the JIT already doesn't do for `dcbz`.
A loop with `dcbz_l` is used in the SDK function `LCEnable`, which is called frequently in some games.
When opening a file dialog to set the location of a custom path, use the
corresponding user path as the starting location instead of the current
custom path.
When no custom path was set the dialog would be opened with a blank path
which causes Windows (not sure about other platforms) to open the dialog
at the same location where the last dialog was closed, or at the current
working directory if no previous dialog had been opened.
If a nonempty custom path has been set then it has also set the
corresponding user path, so the behavior in that case is unchanged.
`MaxAnisotropy = 0` is no longer the safest setting because it forces 1x
even if the game asks for more.
`ForceFiltering` was replaced by `ForceTextureFiltering` in
afe9d5b098. The one remaining occurrence
was merged later.
`ForceTextureFiltering` is an int option and shouldn't be set to False.
Just Dance 3, Just Dance: Best of, and Just Dance: Greatest Hits look
fine on AMD GPUs without manual texture sampling. On Nvidia GPUs they
have a single stripe that I think doesn't warrant forcing manual texture
sampling for everyone.
The NES games I tried worked fine with anisotropic filtering, it just
doesn't do anything.
Various games don't actually have any issue with anisotropic filtering
as long as it's not forced. The only game I could find that actually
requires the default aniso setting is Spider-Man: Shattered Dimensions.
Boogie SuperStar works fine with any texture filtering setting.
Adds `DocumentsContract.Root.FLAG_SUPPORTS_IS_CHILD` to the list of the flags in order to show up for third-party apps for easier file syncing with local/cloud file server providers
Adds `DocumentsContract.Root.FLAG_LOCAL_ONLY` to the list of the flags in order to show up for third-party apps for easier file syncing with local/cloud file server providers
The callback mechanism AchievementManager had until now only supported
one caller registering a callback, and it didn't have any
synchronization. This isn't a problem for DolphinQt, but the PR to add
Android support for RetroAchievements exposes these problems. Let's
replace it with HookableEvent, which can handle all of this.
The instruction implementations that were shifting the size by 4 would
emit an incorrect instruction when given a size of 64. The correct
implementation is to count the number of leading or trailing zeroes in
the size parameter, which is what IntLog2 does.
No callers are affected by this, as they all use sizes other than 64.
Actually, some of these instructions are even invalid with a size of 64,
but I'm changing them anyway for consistency with the others.
When dragging the selection, the mismatch between signal
(itemSelectionChanged) and data consumed (currentRow) seemed to cause
the description to lag behind by one row.
We should attempt to use not only mirrored versions of the immediate as
an ORR base, but also the immediate itself. This lets us emit certain
64-bit constants using fewer instructions.
Improves the accuracy of FMADDS and other single precision FMA operations
This is accomplished by using an error-free transformation
It also thoroughly explains the quirks and difficulty of these operations
This fixes Mario Strikers and is necessary for fully fixing 1080 Avalanche
For single precision inputs it should be equivalent to a 32-bit FMA
Aside from allowing users to persistently set the window to their
desired size, this is also necessary to allow saving of the splitter
positions in FIFOAnalyzer to work correctly.
Make MainWindow::m_fifo_window a unique_ptr to ensure its destructor is
triggered when MainWindow is destroyed.
FIFOPlayerWindow doesn't set MainWindow as its parent in order to
prevent raising MainWindow when focusing FIFOPlayerWindow. This avoids
MainWindow covering up RenderWidget when, e.g., trying to use the object
range feature to pinpoint the index of a particular object.
As a consequence, unlike most QObjects FIFOPlayerWindow wasn't destroyed
when its parent widget was since it didn't have one.
IsolateWasOverwritten and IsolateNotOverwritten share the same basic
logic and have almost exactly the same code, with the only difference
being the comparison function used to keep or discard branches. To avoid
unnecessary code duplication and ensure that the functions stay in sync
after any future changes, create a helper function that takes the
comparison function as a parameter and have IsolateWasOverwritten and
IsolateNotOverwritten call that helper.
Show "(off)" instead of "" when the default post-processing effect is
selected. This also indirectly fixes issues with keyboard navigation of
the post-processing effect combobox when the default is selected,
resolving https://bugs.dolphin-emu.org/issues/13863.
m_post_processing_effect was previously using the ConfigStringChoice
constructor that assumes the text and data of each option are identical.
This is true for all the other effects, but since "(off)" has the config
value of "" this assumption was failing for it, causing the combobox to
be blank.
Previous changes to the patch allowlist format were not reflected in AchievementManager; this corrects that and re-enables patches and codes in hardcore mode.
Equivalent to a negation, no need to materialize the zero.
Before:
0x52800015 mov w21, #0x0 ; =0
0x6b1802b6 subs w22, w21, w24
After:
0x6b1803f6 negs w22, w24
This case can be handled as a move. It also generates a constant carry
flag.
Before:
0x52800013 mov w19, #0x0 ; =0
0x6b1302b3 subs w19, w21, w19
After:
0x2a1503f3 mov w19, w21
In certain cases, the platform can be "wayland-egl", "wayland-xcomposite", and other values for which I haven't found a full list yet. Instead of matching only "wayland", we now look for "wayland" anywhere in the `QT_QPA_PLATFORM` string in a case-insensitive manner.
Acknowledgements:
`CaseInsensitiveContains`' implementation was heavily inspired by GNU's non-standard glibc `strcasestr` function, which can be found here licensed under GPLv2 or later: https://ftp.gnu.org/gnu/libc/
Host_RequestFullscreen and Host_UpdateMainFrame have been removed, and
Host_RequestRenderWindowSize has been used by DolphinQt since 80699096
and by Android since e8739156.
Remove Host_RefreshDSPDebuggerWindow (which hasn't done anything since
DolphinWX was removed in 44b22c90) and DSP::Host::UpdateDebugger (which
only called Host_RefreshDSPDebuggerWindow).
Remove Host_UpdateMainFrame(). The only non-empty call happened in
DolphinNoGUI which called s_update_main_frame_event.Set(), but
DolphinNoGUI never waits on that event.
Compared to the former, the latter invalidates the icache, which is
something that is likely desired for patches (especially if they are
applied while the game is running).
Invalidate icache only if target address has a different value. Take separate arguements,
instead of a struct, to allow easier usage elsewhere. Overload with u8,
u16 and u32 values for the same reason.
Keep the BalloonTip open when the BalloonTip's arrow prevents the cursor
from being inside the spawning ToolTipWidget, which triggers the
ToolTipWidget's leaveEvent and would previously close the BalloonTip.
When that happens track the cursor until it either leaves the
ToolTipWidget's bounding box or leaves the BalloonTip and goes back to
the ToolTipWidget, and respectively close the BalloonTip or leave it
open.
When 9d9b6d8 changed our target SDK version to Android 16, it made
Android 16 stop calling onBackPressed and stop delivering KEYCODE_BACK
events. Dolphin's code isn't ready for that yet.
Android lets us opt out of this new behavior for now, so let's do so.
But the opt-out will presumably stop working once we start targeting
Android 17, so we're going to have to update Dolphin's code within the
next one or two years to support the replacement API.
Number of instructions stays the same, but we remove the false
dependency on the input registers.
Before:
0x7a1b037a sbcs w26, w27, w27
After:
0x5a9f23fa csetm w26, lo
Another instance where we needlessly materialized constant zero in a
register. We can just write the carry flag directly.
Before:
0x5280001a mov w26, #0x0 ; =0
0x1a1f035a adc w26, w26, wzr
After:
0x1a9f37fa cset w26, hs
Dual Core is primarily known as one of the first troubleshooting steps when emulation or NetPlay misbehave.
I believe(?) the original intent with having it on by default was likely to support users with weaker machines. However, I believe it would be a lot more reasonable for users to manually enable dual core if they really need the performance boost, rather than it is for them to have come ask us in support channel why their cleanly-installed Dolphin is not emulating their games properly.
Instead, this creates a fragile first impression where a clean install of Dolphin is already set up in a way that leads to inexplicable crashes, subtle timing bugs, and NetPlay desyncs.
Note: This changes only applies to the Desktop application, since mobile devices *do* really need the performance boost.
For thread safety, we shouldn't return any pointers or references that
can be used to mutate the state of the PPCSymbolDB. This should be the
final part of making PPCSymbolDB thread safe unless I've missed
something.
9395238 added locking in some PPCSymbolDB functions that access member
variables, but far from all. To ensure thread safety, this commit adds
the missing locking.
9395238 added a mutex to PPCSymbolDB, and made functions return with an
"empty" result if called while the mutex is locked. This new behavior
has the potential to affect not only less important call sites like the
symbol printing mentioned in a comment, but also the JIT deciding if it
should HLE a function.
A later commit in this pull request decreases the amount of lock
contention, reducing the performance impact of this commit.
This lets us get rid of the Reset call in ProcessInputPayload, which was
causing us some threading headaches (see 74ed5e5532). Instead we handle
disconnection in the same way as the libusb implementation does.
We can register a BroadcastReceiver to have Android tell us when a GC
adapter gets connected instead of having a loop where we continuously
call SleepCurrentThread(1000) and poll the current status. When waiting
for a GC adapter to connect, this both reduces power usage and improves
responsiveness.
Note that I made openAdapter get the UsbDevice that's been stored by the
hotplug code instead of having openAdapter find the UsbDevice on its own
like before. This is only because I want to ensure that the UsbDevice
being tracked for disconnection is the same as the UsbDevice actually
being used, in case the user has multiple adapters connected.
Aims to fix https://bugs.dolphin-emu.org/issues/13686.
I'm using a less efficient approach for Jit64 than for JitArm64. In
JitArm64, I'm flushing in the slow access code, but in Jit64, I'm
flushing before the split between the slow access code and the fast
access code, because Jit64 doesn't keep register mappings around for
when it's time to emit the slow access code. But the flushing code is
only emitted when there are memory breakpoints with conditions, so I'd
say that this is a performance loss we can live with.
The next commit will add another piece of code that depends on this
assumption that we've been making. Good opportunity to document it.
In practice, all callers of EmitBackpatchRoutine are locking X30.
When Android sends Dolphin to the background, emulation *must* pause,
otherwise emulation continues running and continues outputting audio to
the user. RetroAchievements mustn't be allowed to override it.
The SetDisc function calls AchievementManager::LoadGame with the game's
volume. Calling AchievementManager::LoadGame again afterwards with
nullptr prevents RetroAchievements from working.
Use ToolTipWidget::SetDescription insead of QWidget::setTooltip to put
the description in the BalloonTip with the title, instead of having the
description be in a separate standard tooltip.
It is useful enough for the Code widget to be enabled the first time
debugging is enabled, but it should not be re-enabled every time the
setting is toggled off and then back on. This also ensures that the
interface is consistent if debugging is enabled without using the
checkbox.
Dolphin never emulated the AHBPROT register before, but the default
value when reading from unimplemented MMIO registers used to be -1,
which happened to match what AHBPROT reads as when all restrictions are
disabled. In 6f25e20c6a I changed the
default to 0 to match observed hardware behavior in the memory range of
the command processor. This broke libogc's DI_Init() which checks
AHBPROT for full hardware access (presumably to ensure that bypassing
IPC for Video DVDs will work).
Fix a copy-paste error causing MemoryWidget's splitter to load the wrong
state data when creating the MemoryWidget.
For me this caused the side panel to be scrunched up every time I
started Dolphin, but the exact effects probably depend on the state of
your MemoryWidget and CodeWidget.
Fix two bugs that occurred when viewing a memory range starting shortly
before 0xffffffff.
Bug 1: When there was at least one visible memory address at or after
0x0 none of the values would be displayed even when some of the
addresses were valid. This happened because the loop condition in
GetValues immediately returned false since m_address_range.first >
m_address_range.second, causing m_values to be empty. This in turn led
every address to be considered INVALID_MEMORY in UpdateColumns.
Bug 2: When m_address_range.second was equal to 0xffffffff GetValues
would enter an infinite loop. This happened because address would
overflow to 0 after printing the last value in the table, causing the
loop condition address <= m_address_range.second to be true forever.
Require ReadArray and WriteArray to be called with a trivially copyable
type.
ReadArray and WriteArray call std::fread and std::fwrite respectively.
These functions trigger undefined behavior when the objects are not
trivially copyable, so this adds that requirement to the callers.
Fix creation of a ".sav" file in the current working directory on
emulation shutdown when a slot is set to "Advance Game Port" and the
"GBA Cartridge Path" is empty.
Fixes https://bugs.dolphin-emu.org/issues/12975.
Fix some common anti-patterns with these data structures.
- You can dereference the iterator returned by `find` to access the
underlying value directly, without an extra `operator[]`/`at`.
- Rather than checking for an element before insertion/deletion, you can
just do the operation and if needed check the return value to
determine if the insertion/deletion succeeded.
Unlike custom banners which work as an override, this mechanism works as
a fallback. The use case is if you have games you don't really play but
want to keep around for testing purposes without filling up your NAND
with lots of saves. For ease of use, the directory structure is the same
but only title/$title_hi/$title_lo/data/banner.bin files are
relevant.
Fix the input string failing to validate when the "Hex Byte
String" input type is selected and either the user adds a 0x prefix or
the "Hex" box is checked (or both).
The latter failure was particularly troublesome because when "Hex Byte
String" is selected the "Hex" checkbox is disabled. Users would have to
switch to a data type that enabled the box, toggle it, then switch back
to "Hex Byte String" to fix it.
Fix these errors by not adding a prefix when the "Hex" box is checked,
and removing the "0x" prefix from the user's input if present.
Fix validation failing when the user has checked the Hex box and also
includes a "0x" or "-0x" prefix in their input.
Previously an extra "0x" would be inserted, causing the user's input of
"0x13" to become "0x0x13" which would then fail to validate.
Separate LibUSB logic into LibUSBBluetoothAdapter class.
Submit transfers on thread with proper timing.
Throttle before ACL input for reduced input latency.
Immediately send IPC replies for outgoing data.
Continuously submit libusb transfers to fill HCI/ACL input queues.
Simplify endpoint handling and state saving.
Other cleanups.
Remove the redundant s_populate_mutex and only use
ControllerInterface::m_devices_population_mutex instead to prevent a
deadlock caused by locking them in opposite orders.
The device population functions in the win32 InputBackend previously
locked s_populate_mutex first before calling various functions that
locked m_devices_population_mutex. This normally worked but
ControllerInterface::RefreshDevices locks m_devices_population_mutex
first and then calls HandleWindowChange which then locked
s_populate_mutex, potentially causing the deadlock.
Fix this by using PlatformPopulateDevices to lock
m_devices_population_mutex before running the code that was previously
protected by s_populate_mutex. The functions in question lock
m_devices_population_mutex anyway, so this shouldn't meaningfully
increase contention on the lock.
Reproduction steps:
* Let Dolphin finish startup.
* In Win32.cpp::OnDevicesChanged set a breakpoint on the call to
PlatformPopulateDevices. When the breakpoint is triggered the function
will have locked s_populate_mutex, but since PlatformPopulateDevices
won't have run yet m_devices_population_mutex will still be unlocked.
* Unplug a device from your computer.
* Wait for the breakpoint to trigger. (At this point you can plug the
device back in).
* Freeze the ntdll.dll!TppWorkerThread() that triggered the breakpoint.
* Resume Dolphin and start a game.
* Core::EmuThread will call ControllerInterface::ChangeWindow which
calls RefreshDevices. It locks m_devices_population_mutex, then calls
InputBackend::HandleWindowChange, which tries to lock
s_populate_mutex.
* Unfreeze ntdll.dll!TppWorkerThread().
At this point EmuThread and TppWorkerThread are deadlocked. The UI is
still responsive since the Host thread is unaffected, but trying to stop
the game or close Dolphin normally will fail since EmuThread is unable
to stop.
When selecting cars, this game crashes with GFX FIFO: Unknown Opcode. This is solved by disabling Dual Core, as the error message suggests.
There is no information about this on the Wiki, just a link to a gameplay on YouTube.
This is my first PR here and one of the first ones on GitHub. Due to personal issues I don't have much free time to dedicate to this, but I'm doing my best to get everything right.
Cleanup loading code and reduce amount of signals.
On boot. allow previously loaded map to be kept, if its filename matches. Useful for restarting a game with a large symbol map.
Instead of creating many 128 KiB mappings, we can create a few large
mappings. On my Windows PC, this speeds up GameCube (FakeVMEM) game boot
times by about 200 ms and Wii game boot times by about 60 ms. Loading
savestates is also faster, by about 45 ms for GameCube (FakeVMEM) games
and 5 ms for Wii games. The impact is presumably smaller on other OSes
because Windows is particularly slow at creating mappings.
Notes are separate from function symbols, and can be searched separately.
Unlike functions, notes of different length can overlap each other.
In the instruction window, a note will always display over the function symbol.
Add a missing ClInclude line in DolphinQt.vcxproj for
NonAutodismissibleMenu.h. Missing the ClInclude doesn't break
compilation, but prevents various IntelliSense features in Visual
Studio from working properly with the file.
Emit the dataChanged signal when adding or removing tags from a game.
This both updates the contents of the game's Tags column immediately
(instead of having to wait for the context menu to be closed), and
updates the sorting if games are being sorted by the Tags column.
Use NonAutodismissibleMenu for MenuBar's Options, JIT, and
Tools->"Connect Wii Remotes" menus, as well as for the Tags menu in
GameList's context menu.
NonAutodismissibleMenu allows users to check or uncheck multiple
checkable menu items without closing the menu between selections.
Delete old Updater.log file from GetExeDirectory().
The log was moved to GetUserPath(D_LOGS_IDX) in 5.0-14529, but users
looking to make a bug report might find the old one instead so let's
delete it to prevent any confusion.
The bean menu in this game does not react when the analog control stick
is moved perfectly to the right (0 degress). This happens when the
analog stick is mapped to digital inputs.
Currently, Dolphin contains a hardcoded controller hack to work around
this issue. With this patch, it should no longer be needed; see #13177.
Prior to this change, any game unrecognized by RetroAchievements would ultimately result in the game being "Closed" by AchievementManager. As a result, if any game was run while in this state without any other closing being done, AchievementManager would simply load it like a new game, despite memory already being accessed.
However, testing and documentation determined that the rcheevos client doesn't actually complain when it fails to hash a game; it just runs this as "Unidentified Game" with RA ID = 0. As such, this change utilizes that in AchievementManager to differentiate between no software running and unidentified software running.
As a result of this, now LoadGame needs to be called for every piece of runnable software, supported format or otherwise. If a supported format is not available, LoadGame can now be called with a nullptr to ensure that rcheevos still properly sets up an unidentified game.
The memory copy algorithm (only needed for RetroAchievements devs) was broken for Gamecube as it assumed EXRAM size was zero when in reality it's using ARAM. For the time being, we do not need to use or access ARAM so instead this sets that value to zero for Gamecube titles.
Without this, there was a bug where if you turned the device's screen
off and on again while in the advanced mapping dialog, the input
indicators would stop updating. This is because turning the screen on
again causes devices to refresh, which causes all devices to be
recreated, leaving the AdvancedMappingControlViewHolders stuck
referencing controls belonging to devices that are no longer being
updated.
This makes sure view holders get proper widths when they use
layout_width="match_parent". This becomes quite noticeable for
AdvancedMappingControlAdapter in the next commit, but I'm also
making the change for other adapters while I'm at it.
Remove window hints clearing the flag Qt::WindowContextHelpButtonHint,
which is already off by default in Qt 6.
In Qt 5 this flag was set by default for QDialogs, and on Windows put a
? button in the corner of the title bar allowing users to activate Qt's
QWhatsThis help system for a given widget. Since we don't set that text
the ? button was useless and so we hid it manually.
Google Play is now blocking distribution for Android TV unless we
explicitly set the android.hardware.microphone hardware feature as
android:required="false", because it's inferring
android.hardware.microphone from the android.permission.RECORD_AUDIO we
added for Wii Speak emulation, with android:required defaulting to true.
I was under the belief that setting android:required="false" on
android.permission.RECORD_AUDIO would solve this, but looking closer at
the definition of <uses-permission>, it doesn't actually support
android:required attributes, so that presumably has no effect.
Google Play is now blocking distribution for Android TV unless we
explicitly set the android.hardware.microphone hardware feature as
android:required="false", because it's inferring
android.hardware.microphone from the android.permission.RECORD_AUDIO we
added for Wii Speak emulation, with android:required defaulting to true.
I was under the belief that setting android:required="false" on
android.permission.RECORD_AUDIO would solve this, but looking closer at
the definition of <uses-permission>, it doesn't actually support
android:required attributes, so that presumably has no effect.
This can reduce audio latency according to
https://developer.android.com/ndk/guides/audio/opensl/opensl-prog-notes#perform.
Previously we were using the hardcoded values of 48000 Hz and 256 frames
per buffer. The sample rate we use with this change is 48000 Hz on all
devices I'm aware of, but the buffer size does vary across devices.
Terminology note: The old code used the term "sample" to refer to what
Android refers to as a "frame". "Frame" is a clearer term to use for
this, so I've changed OpenSLESStream's terminology. One frame consists
of one sample per channel.
Not sure if we're ever going to want to have more than one of these at
the same time, but these global variables are a code smell nonetheless.
I'm also deleting the existing member variables because they were
unused.
Refactors the PatchAllowlistTest to streamline the experience for developers. Instead of a textual description of what needs to change in ApprovedInis.json for RetroAchievements compatibility, the test will now generate a replacement file and instruct the coder where to copy it in their local branch, and what to update APPROVED_LIST_HASH to. The result should be easier and more instructive for developers to make changes, while still maintaining that allowed codes cannot be added or modified without recompiling Dolphin.
As ApprovedInis.json no longer needs to be user-readable for this process, it no longer contains titles or pretty formatting and as such is updated in this commit, hash included.
This was causing deadlocks when a game didn't load (including if RetroAchievements does not yet support it) because it was attempting to close the queue the the callback was currently running on, forcing LoadGameCallback to wait for LoadGameCallback to finish. However, it appears that recent changes to the queue have independently resolved the reason CloseGame was being called here in the first place.
Fix the UI hanging for several seconds when opening the Controllers
window.
Move the scan for Bluetooth adapters onto a separate thread so the Host
thread doesn't have to wait for it.
Only automatically scan for adapters once, when opening the Controllers
window for the first time. Add a Refresh button to let the user refresh
the adapter list afterward.
If you already have a mapping set in the advanced mapping dialog and
want to change it, the easiest way to do it is to press Clear and then
select the new mapping from the list. But pressing Clear causes the
dialog to close, forcing you to open it again, which is inconvenient.
This commit makes it so the Clear button doesn't close the dialog.
This feature allows overriding the frequency of the Vertical Blank Interrupt. For many games, this means that their gameplay speed will change without affecting audio, which would be useful by itself (e.g. grinding in RPGs).
However, there are games that use delta time for their game logic, which allows them to be played at >60 FPS at the same gameplay speed!
Some games aren't dynamic though, and require a patch to adjust their game speed variable.
On real hardware, stswi and stswx don't trigger any of the special
behavior for uncached unaligned writes that was implemented in 543ed8a.
This is confirmed by a hwtest (a new commit in
https://github.com/dolphin-emu/hwtests/pull/42).
This change fixes Dolphin's stswi and stswx implementations so they stop
triggering the special behavior, bringing them back to the behavior they
had before 543ed8a. No games are known to be affected, but Extrems has
reported that it affects homebrew they've made.
This message can be sent a lot when polling inputs from a keyboard. HIDv5.cpp doesn't log INTRMSG in such a way. If needed, log messages can be added into specific devices instead.
Prince of Persia: Sands of Time exhibits screen tearing on FMVs in Dolphin. Tested the setting (suggested by Amphitryon) on PC and Android and can confirm the tearing previously seen is gone with EarlyXFBOutput disabled.
1. Fix Wii Speak SAMPLER_MUTE register:
The register should be 12 (i.e. 0x0c) instead of 0xc0.
2. Fix Wii Speak buffer memcpy size parameter:
It seems to fix random echoes and reduce noises when nobody is speaking.
3. Change the isochronous transfer timing:
It is based on empirical testing.
Based on @noahpistilli (Sketch) PR:
https://github.com/dolphin-emu/dolphin/pull/12567
Fixed the Windows support and the heisenbug caused by uninitialized
members.
Config system integration finalized.
The clone of system memory used by AchievementManager during achievement development for the sake of thread decoupling was only copying MEM1; this grabs MEM2 as well if it exists.
Within AchievementManager, CloseGame being called when LoadGame fails was causing m_queue.Cancel to be called within a lock when Cancel itself locks until it is empty, causing a deadlock. This is resolved by cancelling the queues outside of the lock when they are safe to wait for resolutions.
A new class that derives from `QMenu` has been introduced. Menus of this
`NonAutodismissibleMenu` type will stay visible when a _checkable_
action is triggered.
This is convenient in menus that feature a series of check boxes that
toggle visibility of third components (e.g. the **List Columns** menu),
allowing the user to toggle several actions at once.
For now, the new type is used in the top menu bar.
Verify a touchpad is present before polling it for input. Without this
check the Debug log is spammed with the message "error: Parameter
'touchpad' is invalid" if you have a controller without a touchpad.
One would think every touchpad supports at least 1 finger, but in case
there's some weird edge case check the finger count to be sure.
This fixes a memory leak that would occur when the Android frontend
calls LogManager::Init more than once in order to reload settings.
Note that the log window listener is now owned by LogManager instead of
by the frontend, making it consistent with the other log listeners.
Old cruft from when the Android code was loading INI files manually.
We don't have any handling for failing to load settings anymore.
This change also updates related comments to reflect how things actually
work nowadays.
Add a method to detect console ID from an input file and instruct rcheevos to load as Gamecube or Wii accordingly. Also, hash .wads upon loading, to support achievements on WiiWare titles.
Probably a copy-paste error from layout-ldrtl/list_item_setting.xml.
This error made it so a long setting name could overlap with the
checkbox next to it if Dolphin was running with right-to-left layout.
The incorrect ID was apparently also causing the app:lintVitalRelease
build task to fail. I guess we're not running that build task, because I
only heard of this from someone building Dolphin locally.
Results in a "MSVC_RUNTIME_LIBRARY value 'MultiThreadedDLL' not known for this ASM compiler" otherwise, and zstd doesn't support the relevant ASM code for MSVC anyway.
There's no guarantee that directory initialization has completed by this
point, so we can't safely use NativeLibrary.
I'm making this change because of a crash being reported in Google Play
Console. The exact way it's crashing is mysterious to me, so I'm not
sure if this commit fixes the crash, but I think this commit is
a reasonable change to make even if it doesn't fix the crash. Backtrace
from Google Play Console:
#00 pc 0x0000000000469074 /data/app/~~m0kqybFNfeqnDenQFc53XQ==/org.dolphinemu.dolphinemu-Mtaw0lU8DVUQbte2ZjBp3w==/lib/arm64/libmain.so (std::__ndk1::pair<std::__ndk1::basic_string<char, std::__ndk1::char_traits<char>, std::__ndk1::allocator<char>> const, std::__ndk1::basic_string<char, std::__ndk1::char_traits<char>, std::__ndk1::allocator<char>>>::pair[abi:nn180000]<char const* const&, char const* const&, 0>(char const* const&, char const* const&)) (BuildId: 64cfebf5b574b6729ebc51799aa94ccc3238cbcc)
#01 pc 0x0000000000468e9c /data/app/~~m0kqybFNfeqnDenQFc53XQ==/org.dolphinemu.dolphinemu-Mtaw0lU8DVUQbte2ZjBp3w==/lib/arm64/libmain.so (std::__ndk1::pair<std::__ndk1::__tree_iterator<std::__ndk1::__value_type<std::__ndk1::basic_string<char, std::__ndk1::char_traits<char>, std::__ndk1::allocator<char>>, std::__ndk1::basic_string<char, std::__ndk1::char_traits<char>, std::__ndk1::allocator<char>>>, std::__ndk1::__tree_node<std::__ndk1::__value_type<std::__ndk1::basic_string<char, std::__ndk1::char_traits<char>, std::__ndk1::allocator<char>>, std::__ndk1::basic_string<char, std::__ndk1::char_traits<char>, std::__ndk1::allocator<char>>>, void*>*, long>, bool> std::__ndk1::__tree<std::__ndk1::__value_type<std::__ndk1::basic_string<char, std::__ndk1::char_traits<char>, std::__ndk1::allocator<char>>, std::__ndk1::basic_string<char, std::__ndk1::char_traits<char>, std::__ndk1::allocator<char>>>, std::__ndk1::__map_value_compare<std::__ndk1::basic_string<char, std::__ndk1::char_traits<char>, std::__ndk1::allocator<char>>, std::__ndk1::__value_type<std::__ndk1::basic_string<char, std::__ndk1::char_traits<char>, std::__ndk1::allocator<char>>, std::__ndk1::basic_string<char, std::__ndk1::char_traits<char>, std::__ndk1::allocator<char>>>, std::__ndk1::less<std::__ndk1::basic_string<char, std::__ndk1::char_traits<char>, std::__ndk1::allocator<char>>>, true>, std::__ndk1::allocator<std::__ndk1::__value_type<std::__ndk1::basic_string<char, std::__ndk1::char_traits<char>, std::__ndk1::allocator<char>>, std::__ndk1::basic_string<char, std::__ndk1::char_traits<char>, std::__ndk1::allocator<char>>>>>::__emplace_unique_impl<char const* const&, char const* const&>(char const* const&, char const* const&)) (BuildId: 64cfebf5b574b6729ebc51799aa94ccc3238cbcc)
#02 pc 0x0000000000462f08 /data/app/~~m0kqybFNfeqnDenQFc53XQ==/org.dolphinemu.dolphinemu-Mtaw0lU8DVUQbte2ZjBp3w==/lib/arm64/libmain.so (Common::Log::LogManager::GetLogTypes()) (BuildId: 64cfebf5b574b6729ebc51799aa94ccc3238cbcc)
#03 pc 0x000000000044339c /data/app/~~m0kqybFNfeqnDenQFc53XQ==/org.dolphinemu.dolphinemu-Mtaw0lU8DVUQbte2ZjBp3w==/lib/arm64/libmain.so (Java_org_dolphinemu_dolphinemu_NativeLibrary_GetLogTypeNames+56) (BuildId: 64cfebf5b574b6729ebc51799aa94ccc3238cbcc)
#04 pc 0x000000000031456c /data/misc/apexdata/com.android.art/dalvik-cache/arm64/boot.oat (art_jni_trampoline+108)
#05 pc 0x0000000000781508 /apex/com.android.art/lib64/libart.so (nterp_helper+152)
#06 pc 0x00000000002d94d4 /data/app/~~m0kqybFNfeqnDenQFc53XQ==/org.dolphinemu.dolphinemu-Mtaw0lU8DVUQbte2ZjBp3w==/base.apk (org.dolphinemu.dolphinemu.features.settings.ui.SettingsFragmentPresenter.<clinit>+16)
[...]
Previously, PerformanceTracker registered a callback to be updated on
emulation state changes. PerformanceTrackers live in a global variable
(g_perf_metrics) within libvideocommon. The callback was stored in a
global variable in libcore. This created a race condition at shutdown
between these libraries, when the PerfTracker's destructor tried to
unregister the callback.
Notify the PerfTracker directly from libcore, without callbacks, since
Core.cpp already references g_perf_metrics explicitly. Also rename
Core::CallOnStateChangedCallbacks to NotifyStateChanged to better
reflect what it's doing.
Extracted games contain a boot.bin file that contains the disc header.
These boot.bin files are considered valid volumes by Dolphin, since
Dolphin only checks the disc header to determine if something is a valid
GC/Wii disc. Running them doesn't make any sense, though.
boot.bin files used to not be scanned by Dolphin due to their file
extension, but .bin was added to the list of file extensions to scan for
in 494e2c0. To stop them from showing up in the game list, let's update
the ShouldHideFromGameList mechanism.
Different threads are adding and calling callbacks, so this should have
some locking. This is both to ensure thread safety when accessing
`s_callbacks` and to ensure that there won't be situations where a
callback gets called after it's removed.
`s_callback_guards` is also accessed from multiple threads and has
therefore been made atomic.
a1691a4 made it so analytics start events can only be generated when
starting the main activity. However, some users launch Dolphin's
emulation activity from a separate frontend application, bypassing
Dolphin's main activity. This change adjusts the logic so that start
events can be generated if any activity is started after 6 hours of
inactivity. This more closely matches the behavior we had before
a1691a4, while still ensuring duplicate start events aren't generated.
I've also fixed the inconsistent indentation in ActivityTracker.kt.
Require callers of Config::AddConfigChangedCallback and
CPUThreadConfigCallback::AddConfigChangedCallback to handle the returned
ConfigChangedCallbackIDs to hopefully prevent future issues with
callbacks getting called after their associated objects have been
destroyed.
Use a single lambda as a callback which calls InitCustomPaths and
RefreshConfig instead of having separate callbacks for each of them.
This fixes the callback for InitCustomPaths not being removed on
shutdown; the callback for the lambda (previously for RefreshConfig) is
already removed in Shutdown().
Prevent SetHardcoreMode from being called after m_client is set to
nullptr. rc_client_set_hardcore_enabled() checks for nullptr so this
didn't cause any problems, but better not to rely on that.
Also prevents multiple SetHardcoreMode callbacks from piling up when
repeatedly toggling Config::RA_ENABLED.
Remove ConfigChangedCallback in MainWindow's destructor to prevent the
callback from accessing the destroyed MainWindow afterward.
After MainWindow is destroyed UICommon::Shutdown calls
LogManager::Shutdown which ultimately triggers any remaining callbacks.
This resulted in calling MainWindow::OnHardcoreChanged, which crashed in
debug builds and didn't have any obvious effect in release builds.
Fixing an oversight: this was causing the debugger to be disabled if achievements were disabled but hardcore mode was still enabled in the .ini. This fix properly checks for hardcore state via AchievementManager which takes both settings into account.
I've been playing Rock Band 3 recently and have experienced a bug where
sometimes if you disconnect and reconnect a USB microphone, the game
won't pick up on it connecting, not even it you disconnect and reconnect
it again. An investigation into what's going on inside Dolphin shows
that when the game triggers a call to OH0::DeviceOpen after the device
has been reinserted, Dolphin doesn't open the device because it's
already present in m_opened_devices.
Removing the device from m_opened_devices after calling OH0::TriggerHook
in OH0::OnDeviceChange resolves this specific issue in my testing. Doing
this matches us removing the device from m_opened_devices after calling
OH0::TriggerHook in OH0::DeviceClose, but I haven't looked at exactly
what real IOS does.
I have been able to reproduce a much rarer issue that has the same
symptoms on the surface but where OH0::DeviceOpen gets past its
m_opened_devices check. I'm currently not sure what the cause of this
remaining issue is.
If the build folder is created from an older commit and this flag is not set, the last value set for this flag will be used instead.
This is currently happening on our macOS build machine, causing macOS 10.15 to still be used as the deployment target.
71f654c added a new platform in the middle of the C++ platform enum
without updating the corresponding Android code, making the Android code
incorrectly treat Wii discs as WAD files, WAD files as DOL/ELF files,
and so on. This commit fixes the problem.
To be able to add the new Triforce entry into the Platform enum without
it leading to the UI getting an additional tab, I'm splitting the enum
into Platform and PlatformTab. Platform now exactly matches the C++
enum (previously it excluded ELFOrDOL), and PlatformTab has the same
content as the old Platform.
RetroAchievements disables pausing too frequently when running but there's no sense of doing this if RetroAchievements does not currently have a game running.
Some games open two USB interfaces, e.g. /dev/usb/oh0 and /dev/usb/hid.
This was causing us to run two scanning threads at once, using up more
CPU time for scanning than we need to.
We have identified that a failed RetroAchievements game load (most easily done when closing a game before the server can finish responding) can leave data behind that causes problems. As such, refactored CloseGame to always delete data even if there wasn't a game loaded when it was called, and call it on the failure paths of LoadGameCallback.
Instead of having USBScanner create "hooks" as it scans for devices,
let's have USBScanner present a list of devices to USBHost and have
USBHost diff the new device list with its old device list to create the
hook calls instead. This gets rid of some complex edge cases that the
next commit otherwise would have to deal with, in particular regarding
toggling determinism and adding new USBHosts to a USBScanner.
Note: After adding the missing locking of m_devices_mutex, I had to move
the locking of m_hooks_mutex to avoid a random deadlock between the CPU
thread and USB scanning thread. (Either that or I would have to lock
m_devices_mutex before m_hooks_mutex.)
This gets rid of the ugly direct access to USBScanner::m_devices that
was introduced by the previous commit.
This also fixes a potential thread safety issue.
USB_HIDv4::TriggerDeviceChangeReply loops through m_devices and calls
GetDeviceEntry for each device. If USB_HIDv4::TriggerDeviceChangeReply
is called after a new device is added to m_devices but before hooks are
dispatched, GetDeviceEntry crashes, because the hook that's supposed to
update m_device_ids hasn't run yet. With this commit, this issue can no
longer happen, because USBHost::m_devices_mutex doesn't get unlocked in
between updating m_devices and dispatching the hooks.
dolphin-start event was being generated twice for the normal
end-user case, as can be seen in analytics data for some years.
The problem occured when:
* Android reaped the process hosting the dolphin activity
(e.g. for power/memory saving).
and
* Dolphin activity was in "stopped" state for > 6 hours before
being switched back to.
Under above conditions, both calls to ReportStartToAnalytics
would be performed, as dolphin thought it was being launched anew,
and also thought it had been asleep for > 6 hours.
fixes https://bugs.dolphin-emu.org/issues/13675
Due to requests from RA Devs, updating the AchievementManager LoadGameCallback to still set MemoryPeeker (and set m_system) if the load game response is NO_GAME_LOADED, so that the memory inspector et al continue function properly on unidentified hashes. Without this, no memory is loaded and the memory inspector will show all zeroes.
If the development system is started for a game with an unrecognized hash, RA_Integration opens a dialog for connecting the hash with a title. That dialog is prepopulated by the results of GameTitleEstimateHandler.
Displays an additional message when an achievement unlocks that isn't on the site yet (either hasn't yet been uploaded or modified from remote) i.e. achievements the "player" is actively developing.
Update several INI GameSettings for Blue Tongue Entertainment games
Add comments & more Nick games fixes
Adds comments to all FMV fixes and adds even more fixes for Nick games
When you use TimePlayed, you have to provide a game ID either when
creating the object or when calling GetTimePlayed on it. If you don't
provide a game ID when creating the object, function calls that don't
take a game ID will silently fail, except for Reload. This isn't very
obvious, and there's no strong benefit to storing the game ID inside
TimePlayed anyway (it just lets TimePlayed skip calling EscapeFileName),
so this commit removes the TimePlayed constructor that takes a game ID
and instead makes the functions that need game IDs always take a game ID
argument.
It was being done manually, which a TODO comment advised against.
Using generic_string() from std::filesystem::path solves this.
Fix encoding issue using generic_wstring instead.
Fix overlays stacking on top of each other or not moving to the edge of
the screen when enabling or disabling overlays while emulation is
active.
This change only applies when Config::GFX_MOVABLE_PERFORMANCE_METRICS is
False.
This lets you use PS3 Rock Band controllers with Wii Rock Band and
Guitar Hero games.
A normal user will probably never have any reason to disable this
behavior, but I figured maybe there's some person out there who would
like to disable it. (For instance, I know there's a mod for RB3 that's
trying to implement the same kind of cross-console controller
compatibility, and that can only be tested if the behavior I'm adding is
disabled.) So the behavior is controlled by an INI-only setting.
The game sets up a fifo breakpoint callback that just writes a flag to
memory. The hang occurs right after calling GXEnableBreakPt(). It is a
busy loop that repeatedly compares the same register without reloading
it from memory. I guess the developers forgot to make the variable
atomic and never noticed because on hardware the breakpoint is hit
immediately so the flag is already set when it is loaded for the first
(and only) time. This patch grows the loop by one instruction to include
the flag load in the loop.
Removed VolumeChanged signal, as ConfigChanged will trigger what is needed.
Only applies UpdateSoundStream to things that can change during emulation.
Settings::SetVolume might no longer be used, but left it in.
Gecko codes in Dolphin feature a dedicated field for the creator of the
cheat code. When saved into the INI file, the code name and the creator
name are concatenated, and then inserted in the `[Gecko]` section:
```ini
[Gecko]
$<cheat code name> [<creator>]
<code line 1>
<code line 2>
<code line 3>
<...>
$<other cheat code name> [<creator>]
<code line 1>
<code line 2>
<code line 3>
<...>
```
On the other hand, enabled codes are listed under the `[Gecko_Enabled]`
section, but in this case the creator name is omitted from the line:
```ini
[Gecko_Enabled]
$<cheat code name>
$<other cheat code name>
```
Having the creator name in the `[Gecko]` section but not in the
`[Gecko_Enabled]` section is arguably not ideal, but this is legacy
behavior in Dolphin.
The **Cheat Code Editor** dialog is not acknowledging this subtle
behavior in Dolphin: the cheat code name and the creator name *can* be
both inserted in the name field. This issue manifests as an inconsistent
state where a Gecko code that *appears* to be enabled has no effect when
the game is launched.
As part of this fix, the creator name (if present) is now moved into the
dedicated creator field before the code is stored internally.
Test plan:
- Right-click on any game and open the **Properties** dialog.
- Switch to the **Gecko Codes** tab.
- Press the **Add New Code...** button.
- In the **Cheat Code Editor** dialog:
- Enter `This is a test [Jane Doe]` in the **Name:** field.
- Enter `01234567 00000000` in the **Code:** field.
- Press **Save**.
- Observe that the newly added code is now in the list, and *appears* to
be enabled.
- Close the **Properties** dialog.
- Right-click on the same game and open the **Properties** dialog again.
**Without** the fix, the newly added code, while still on the list, has
been inadvertently disabled (it was never really enabled!).
**With** the fix, the newly added code is the list and remains enabled.
This fixes https://bugs.dolphin-emu.org/issues/13695.
Fix the following bug:
* Have a moveable ImGui overlay enabled, such as the Statistics window.
* Pause the game.
* Click and hold on the overlay's title bar as if you were going to move
it. Because the screen isn't updating while the game is paused, you
won't be able to actually move the overlay.
* Press the Frame Advance hotkey several times until it stops
responding.
At this point emulation hotkeys are no longer responsive. This can be
resolved by selecting Play from the toolbar or menu, or selecting Frame
Advance from the menu a couple times, but it's annoying and not obvious
what's gone wrong or how to fix it.
Why the bug is happening:
* Doing a framestep while clicking on the overlay title bar causes ImGui
to set IO.WantCaptureKeyboard to true, indicating that ImGui is
requesting Dolphin ignore any keyboard events while the overlay is
being interacted with.
* Dolphin complies with this request, causing
Host_UIBlocksControllerState to return true and thus setting the input
gate to ignore input.
* IO.WantCaptureKeyboard is only updated when ImGui::NewFrame() is
called, which only happens at the end of each present. It thus remains
true indefinitely since the game paused after the last framestep, and
so Dolphin ignores any hotkeys such as the framestep or play keys.
The fix:
Ignore IO.WantCaptureKeyboard when the game is paused. ImGui can't
meaningfully capture input anyway when the game is paused, so this
shouldn't cause any problems elsewhere.
Once async presentation is implemented we'll want to revert this change,
both because it'll become unnecessary and because ImGui will be able to
do stuff while paused and so suppressing emulation hotkeys will actually
be useful.
This is an Android continuation of bc95c00. We now call
InputDetector::Update immediately after receiving an input event from
Android instead of periodically calling it in a sleep loop. This
improves detection of very short inputs, which are especially likely to
occur for volume buttons on phones (or at least on my phone) if you
don't intentionally keep them held down.
bbf72e7 made a change where you can pass `false` to certain MemChecks
functions to get them to skip performing an "update" step. It was then
up to the caller to call the Update function later.
This commit changes the implementation so that, instead of the caller
passing in a boolean that controls whether a function calls Update, the
function now returns an object that on destruction will call Update.
Callers that are fine with Update being called right away can skip
storing the object in a variable and thereby call Update immediately,
and callers that want to call Update later can keep the object around.
This new design reduces the risk that someone will forget calling
Update.
Refactors the AR/Gecko/Patch code approval process to verify from every possible game ini, not just the base game ID. This fixes codes on specific revisions or codes general to any region.
Found via `codespell -q 3 -S "./Externals,./Data/Sys/wiitdb-??.txt,*.po,*.pot" -L andf,asnd,bootup,brocken,bufferin,clen,collet,datas,delt,diety,extint,fpr,inout,inport,interm,nd,nin,ontop,pixelx,re-use,re-used,sav,stateman,strat,transer,wil`
Found via `codespell -q 3 -S "./Externals,./Data/Sys/wiitdb-??.txt,*.po,*.pot" -L andf,asnd,bootup,brocken,bufferin,clen,collet,datas,delt,diety,extint,fpr,inout,inport,interm,nd,nin,ontop,pixelx,re-use,re-used,sav,stateman,strat,transer,wil`
As the PS2 version is the only one with proper 16:9 widescreen, this cheat brings widescreen to the Gamecube version. This cheat has been tested on the NTSC version, but is stated to be region free.
In PPCTables.cpp, the code is currently unused so I was unable to test it.
In CustomPipeline.cpp, a pointer to member function cannot be used due to 16.4.5.2.1 of the C++ Standard regarding "addressable functions". https://eel.is/c++draft/namespace.std#6
In Fs.cpp and DirectoryBlob.cpp, these examples used projections in a previous iteration of this commit, but no longer do. Still, they remain in this commit because the PR they would actually belong to is already merged.
In LabelMap.cpp, the code is currently unused so I was unable to test it.
In WiiUtils.cpp, the magic value `1u` was replaced by the constant value `DiscIO::PARTITION_UPDATE`.
Found via `codespell -q 3 -S "./Externals,./Data/Sys/wiitdb-??.txt,*.po,*.pot" -L andf,asnd,bootup,bufferin,clen,collet,datas,delt,fpr,inout,inport,interm,pixelx,re-use,re-used,sav,stateman,strat,wil`
Clamp overlays to the render window (with some padding), reset their
positions when the render window changes sizes, and add a setting to
enable moving the overlays (off by default, .ini only for now).
This adds the option to configure real Wiimotes by specifying their Bluetooth addresses in
the configuration file. This allows off-brand Wiimotes to work without using the
Bluetooth Passthrough option, if you know their Bluetooth addresses beforehand.
Despite correctly setting the LAP to `0x9e8b00` in `WiimoteScannerLinux::FindWiimotes`
while scanning, which is indeed enough to make off-brand / knock-off Wiimotes respond to a
Bluetooth Inquiry, some (several? all?) bluetooth adapters seem to override and ignore
this given LAP value when performing the Inquiry, and actually use the `0x9e8b33` value as
if a null pointer have been given to `hci_inquiry`, as inspection of USB/Bluetooth packets
by Wireshark indicate. Off-brand Wiimotes don't respond to inquiries with this LAP.
If one happens to know the Bluetooth address of their Wiimote (for example, by checking
`BluetoothPassthrough.LinkKeys` after using Bluetooth Passthrough, or other means such as
directly using `libusb` to force the adapter to use the correct LAP in the Inquiry), then
it's enough to add those addresses to the vector of found Wiimotes.
Since this a niche use case and I only happen to know and have tested in Linux, this
change only affects the `WiimoteScannerLinux` backend. It's likely that it could be added
to other backends, but I'm unfamiliar with these.
If no addresses are given or this config section does not exist, behavior is completely
unchanged.
Introduce a new "Enable Time Tracking" checkbox in the InterfacePane UI. The checkbox is dynamically enabled or disabled based on the emulation state, preventing changes while emulation is active.
Creates TimePlayed class and implemented constructors, AddTime, GetTimePlayed, and Reload methods. Updates CMakeLists.txt and DolphinLib.props as appropriate.
I think someone confused these with the actual token and bounding box
registers in PE, which were added later. In CP they never did anything
and it's suspicious that they have the same addresses as their PE
counterparts. On real hardware they always read as zero.
Move ImGui::End() calls out of if(ImGui::Begin()) blocks.
Quoting from ImGui::Begin's function comment in imgui.cpp:
"You always need to call ImGui::End() even if false is returned."
In practice this didn't cause problems because the windows don't have
title bars and thus can't be collapsed, and so the block containing
::End would always run, but let's do it the right way.
Instead of having UserDataImportWarningDialog set an
`onResultDismiss` callback that examines `mustRestartApp`, and having
UserDataActivity set `mustRestartApp`, just have UserDataActivity set
the callback directly.
This approach is no more data-race-y than the previous approach, and it
simplifies the code. (The behavior of restarting the app when the task
finishes is specific to the user data import flow, and there is no
reason for TaskViewModel to be directly aware of it.)
You can encode a shifted 12-bit immediate in a SUB instruction on ARM64.
We exploit this to avoid materializing the immediate.
This approach saves an instruction if it does not need to be
materialized in a register afterwards. Otherwise, we just materialize
it later and the total number of instructions stays the same.
Before:
0x52a00218 mov w24, #0x100000 ; =1048576
0xcb180379 sub x25, x27, x24
After:
0xd1440379 sub x25, x27, #0x100, lsl #12 ; =0x100000
You can encode a 12-bit immediate in a SUB instruction on ARM64. We can
exploit this to avoid materializing the immediate.
This approach saves an instruction if it does not need to be
materialized in a register afterwards. Otherwise, we just materialize
it later and the total number of instructions stays the same.
Before:
0x5280003a mov w26, #0x1 ; =1
0xcb1a033b sub x27, x25, x26
After:
0xd100073b sub x27, x25, #0x1
While we cannot always avoid materializing immediates, we can still
inspect the most significant bit and potentially skip sign extension.
This can sometimes save an instruction.
Before:
0x5280003a mov w26, #0x1 ; =1
0x93407f5b sxtw x27, w26
0xcb38c37b sub x27, x27, w24, sxtw
After:
0x5280003a mov w26, #0x1 ; =1
0xcb38c35b sub x27, x26, w24, sxtw
Before:
0x52a20018 mov w24, #0x10000000 ; =268435456
0x93407f79 sxtw x25, w27
0xcb38c339 sub x25, x25, w24, sxtw
After:
0x52a20018 mov w24, #0x10000000 ; =268435456
0x93407f79 sxtw x25, w27
0xcb180339 sub x25, x25, x24
You can encode a shifted 12-bit immediate in an ADD instruction on
ARM64. If the negated constant fits in this range, we can exploit this
to avoid materializing the immediate.
This approach saves an instruction if it does not need to be
materialized in a register afterwards. Otherwise, we just materialize
it later and the total number of instructions stays the same.
Before:
0x52bff01a mov w26, #-0x800000 ; =-8388608
0x93407f1b sxtw x27, w24
0xcb3ac37b sub x27, x27, w26, sxtw
After:
0x93407f1b sxtw x27, w24
0x9160037b add x27, x27, #0x800, lsl #12 ; =0x800000
You can encode a 12-bit immediate in an ADD instruction on ARM64. If the
negated constant fits in this range, we can exploit this to avoid
materializing the immediate.
This approach saves an instruction if it does not need to be
materialized in a register afterwards. Otherwise, we just materialize
it later and the total number of instructions stays the same.
Before:
0x12800019 mov w25, #-0x1 ; =-1
0x93407f5b sxtw x27, w26
0xcb39c37b sub x27, x27, w25, sxtw
After:
0x93407f5b sxtw x27, w26
0x9100077b add x27, x27, #0x1
You can encode a shifted 12-bit immediate in a SUB instruction on ARM64.
Constants in this range do not need to be sign extended, so we can
exploit this to avoid materializing the immediate.
This approach saves an instruction if it does not need to be
materialized in a register afterwards. Otherwise, we just materialize
it later and the total number of instructions stays the same.
Before:
0x52a00099 mov w25, #0x40000 ; =262144
0x93407f7a sxtw x26, w27
0xcb39c35a sub x26, x26, w25, sxtw
After:
0x93407f7a sxtw x26, w27
0xd141035a sub x26, x26, #0x40, lsl #12 ; =0x40000
You can encode a 12-bit immediate in a SUB instruction on ARM64.
Constants in this range do not need to be sign extended, so we can
exploit this to avoid materializing the immediate.
This approach saves an instruction if it does not need to be
materialized in a register afterwards. Otherwise, we just materialize
it later and the total number of instructions stays the same.
Before:
0x52800416 mov w22, #0x20 ; =32
0x93407f78 sxtw x24, w27
0xcb36c318 sub x24, x24, w22, sxtw
After:
0x93407f78 sxtw x24, w27
0xd1008318 sub x24, x24, #0x20
A number of settings in the `debugger` group were wrongly using a newly
constructed `QSettings` object instead of the singleton object that
`GetQSettings()` provides.
This made the application create a spurious, extra configuration file in
the user directory:
```
~/.config/Dolphin Emulator/dolphin-emu.conf
```
Notice that, by default, the application configuration files are stored
in `~/.config/dolphin-emu`; not in `~/.config/Dolphin Emulator`.
Adding a community-requested list of Gecko and Action Replay codes to the allowlist. Many of these codes were from the wiki and are being added to Dolphin's repo for the first time.
Change the displayed controls in the TAS Input window when the
controller's extension (including MotionPlus) is changed.
This previously required restarting Dolphin after the attachment was
changed, as the controls were never updated after the WiiTASInputWindow
was created at Dolphin startup.
When I wrote 71e9766519, there was an interaction I didn't take into
account: When setting eq, SetCRFieldBit assumes that all bits in the
passed-in host register except the least significant bit are 0. But if
we use EON or ORN, all bits except the least significant bit get set to
1. This can cause eq to end up unset when it should be set.
This commit fixes the issue.
crandc is unaffected by the issue because the "1" bits get ANDed with
"0" bits from the first operand.
Note that in practice, we never have both bits_1_to_31_are_set and
negate at once, so while it looks like this commit adds an extra AND
instruction in some cases, those cases don't happen in practice, meaning
this fix shouldn't affect performance.
QCheckBox::toggled and other similar signals are used to save changes and to update widget status (such as enabled).. OnConfigChanged needs to load new values and trigger widget updates, but the new value shouldn't trigger a save. A save is unnecessary (the config has the correct values and the UI is being updated to those values) and it'd trigger another ConfigChanged signal. This commit blocks the save without blocking the signal entirely.
The computed value is only used when the register is equal to zero, so
we can fully precompute it and materialize the constant instead. In
other words, we change from
```
return reg == 0 ? (reg | 1ULL << 63) : reg;
```
to
```
return reg == 0 ? 1ULL << 63 : reg;
```
The number of instructions remains the same, but we eliminate an
unnecessary dependency on the register value.
Before:
0xb241037a orr x26, x27, #0x8000000000000000
0xeb1f037f cmp x27, xzr
0x9a9a137b csel x27, x27, x26, ne
After:
0xd2f0001a mov x26, #-0x8000000000000000 ; =-9223372036854775808
0xeb1f037f cmp x27, xzr
0x9a9a137b csel x27, x27, x26, ne
In NandPaths.cpp, the `std::initializer_list<char>` of illegal characters has been turned into a `char[]` (similar to the one in GameList.cpp).
The reverse iteration in ResourcePack.cpp seemed to provide no benefits, and doing without it it seemed to have no ill effects.
The new `Common::Contains` and `Common::ContainsSubrange` function objects mirror C++23's `std::ranges::contains` and `std::ranges::contains_subrange`, respectively.
Recently there was some issues in TASVideos trying to sync a Donkey Kong Country Returns TAS. It eventually was synced by directly using the config from the TAS author. The exact setting which caused the desync was narrowed down to being in SYSCONF, with the country code. The TAS author lives in the US, so the country code matched the US country code, while the person attempting to sync the TAS did not live in the US.
Adding SYSCONF country code to the DTM should avoid this being an issue for future Dolphin versions.
When the input register and carry flags are known, we can always
precompute the result.
We still materialize the immediate when the condition register
needs to be updated, but this seems to be a general problem. I might
look into that one day, but for now this'll do.
- ConstantFalse
Before:
0x52800119 mov w25, #0x8 ; =8
0x2a1903fa mov w26, w25
After:
N/A
- ConstantTrue
Before:
0x52800119 mov w25, #0x8 ; =8
0x1100073a add w26, w25, #0x1
After:
N/A
Same optimization we did for subfex. Skip loading the carry flag into a
temporary register first when we're dealing with zero.
Before:
0x394bd3b8 ldrb w24, [x29, #0x2f4]
0x2a1803f9 mov w25, w24
After:
0x394bd3b9 ldrb w25, [x29, #0x2f4]
When both the input register and the carry flag are constants, the
result can be precomputed.
Before:
0x52800016 mov w22, #0x0 ; =0
0x2a3603f6 mvn w22, w22
After:
The result is either -1 or 0 depending on the state of the carry flag.
This can be done with a csetm instruction.
Before:
0x1280001a mov w26, #-0x1 ; =-1
0x1a1f035a adc w26, w26, wzr
After:
0x5a9f23fa csetm w26, lo
When the immediate is zero, we can load the carry flag from memory
directly to the destination register.
Before:
0x394bd3b8 ldrb w24, [x29, #0x2f4]
0x2a1803f9 mov w25, w24
After:
0x394bd3b9 ldrb w25, [x29, #0x2f4]
To my knowledge, all of the GameCube versions of *Metroid Prime* and *Metroid Prime 2: [Dark] Echoes* only support 4:3, not 16:9 .
Currently, Dolphin's widescreen heuristic will fail to detect this and will erratically switch between 4:3 and 16:9 when Aspect Ratio is set to Auto.
These changes prevent the erratic aspect ratio switching by manually declaring that the game is solely 4:3.
Resolves duplicate OSD messages for Loading and Found custom textures.
VideoBackend initialization results in HiresTexture::Init being called.
We already call HiresTexture::Update when OnNewTitleLoad is called.
Thus we can remove HiresTextures::Init completely as it is redundant.
All valid PPC imm masks (except for all zeroes and all ones) are also
valid AArch64 imm masks. This lets us optimize things a little.
Note that because I'm now ANDing rS before rotating it, its AND mask
is rotated left. All AArch64 imm masks can be rotated by any amount and
still be valid AArch64 imm masks.
No games seem to use this, so this isn't useful as a performance
optimization, but it's required for correctness because the (sh == 0)
case of our implementation doesn't handle zero masks.
In JitRegCache.cpp, the lambda predicate were replaced by a pointer to member function because ranges algorithms are able to invoke those.
In ConvertDialog.cpp, the `std::mem_fn` helper was removed because ranges algorithms are able to handle pointers to member functions as predicates.
In BoundingBox.cpp, the lambda predicate was returning the bool element unchanged, so `std::identity` was a better fit.
In WiimoteReal.cpp, JitRegCache.cpp, lambda predicates were replaced by pointers to member functions because ranges algorithms are able invoke those.
In ConvertDialog.cpp, the `std::mem_fn` helper was removed because ranges algorithms are able to handle pointers to member functions as predicates.
In DITSpecification.cpp, MaterialAsset.cpp, and ShaderAsset.cpp, lambda predicates were replaced by pointers to member functions because ranges algorithms are able invoke those.
In NetPlayClient.cpp, the non-trivial `NetPlay::Player` elements were being passed by value in `NetPlayClient::DoAllPlayersHaveGame()`. This has been fixed.
In WIABlob.cpp, the second example's predicate was returning the `std::optional` by value instead of implicitly converting it to a bool. This has been fixed.
Creates a layer outside the game config layer system and passes it to the created gfx widows, so as to not interfere with the global config system.
Supports multiple game properties being open at once.
Supports editing while a game is playing, but the options only save and update the active game when the window is closed.
Right-clicking will remove a property from the game ini.
New code adds a test failure if there's a Patches/Gecko/AR_Retroachievements_Verified code that doesn't appear to actually exist in the file. This will catch if the allowed patch is formatted wrong, which I found happening several times already due to not realizing that the patch author's name would need to be omitted.
Prefer BLENDVPD over VBLENDVPD if the latter doesn't save any
instructions.
VBLENDVPD allows separate source and destination registers, which can
eliminate a MOVAPD/MOVSD. However, on Intel since Skylake, VBLENDVPD
takes additional uops to execute compared to BLENDVPD (according to
https://uops.info). On AMD and older Intel microarchitectures there is no
difference.
Some generators (like Unix Makefiles and Xcode) copy an app's Info.plist at configure time.
This causes a problem when we need to generate the Info.plist at build time, like how we
currently do it with ScmRevGen. Instead of generating the Info.plist directly in ScmRevGen,
provide an Info.plist without any version information to CMake at configure time, have
ScmRevGen generate a separate plist file with the version information at build time, and
then merge the two together to create the final Info.plist.
Now that patches and codes are enabled on a case by case basis, remove patcher code blocking codes entirely in hardcore mode, and reword the warning to be more accurate.
This apparently didn't compile on macOS six years ago before c++20, but
it should be fine by now.
While I'm at it, make the constants upper case per convention.
The value being stored must be loaded into a register. In the case of an
immediate value, this means it must be materialized. The value is
eventually byteswapped before performing the store.
This can be simplified for the value 0 for two reasons:
- ARM64 has a dedicated zero register, so does not need to be
materialized.
- Byteswapping zero is still zero, so we can skip this step.
We could skip byteswapping for other values by immediately materializing
the byteswapped value in a register, but the benefits are not so clear
there (if the value needs to be materialized anyway, it is better to do
it up front).
Before:
0x5280001b mov w27, #0x0 ; =0
0xb9404fba ldr w26, [x29, #0x4c]
0x12881862 mov w2, #-0x40c4 ; =-16580
0x0b020342 add w2, w26, w2
0x5ac00b61 rev w1, w27
0xb8226b81 str w1, [x28, x2]
After:
0xb9404fbb ldr w27, [x29, #0x4c]
0x12881862 mov w2, #-0x40c4 ; =-16580
0x0b020362 add w2, w27, w2
0xb8226b9f str wzr, [x28, x2]
Unlike on x64, inverting EQ or GT in SetCRFieldBit saves us one
instruction. Also unlike on x64, inverting SO or LT in GetCRFieldBit
requires an extra instruction (just like in SetCRFieldBit). Due to this,
replacing an invert in GetCRFieldBit with an invert in SetCRFieldBit
when possible is either equally good or better - never worse.
MUL and SUB can be combined in one instruction.
Before:
0x1b1a7c01 mul w1, w0, w26
0x4b010318 sub w24, w24, w1
After:
0x1b1ae018 msub w24, w0, w26, w24
`std::erase` is a replacement for the remove-erase idiom.
Changes to `OpenModeToAndroid` inadvertently revealed that the prior implementation had UB (potentially deleting the end iterator). This is now fixed.
When we boot the core, it needs to have a valid surface to draw graphics
to. Our Kotlin code does wait for a valid surface to exist before it
calls NativeLibrary.Run, but there's a chance for the surface to be
deleted before Run locks s_surface_lock. If that happens, the core boots
without a valid surface, which presumably would cause a crash. (I
haven't been able to reproduce the problem myself.)
Storing the log type names in a map results in them getting re-sorted by
their keys, which doesn't quite give us the sorting we want. In
particular, the Achievements category ended up being sorted at R (for
RetroAchivements) instead of at A. Every use of the map is just
iterating through it, so there's no real reason why it has to be a map
anyway.
Normally, the asserts added in 34b0a6ea90 are only triggered when
something actually went wrong in Dolphin. But there is one exception:
In FallBackToInterpreter, we flush all registers regardless of whether
they're discarded. This is fine as long as none of the discarded
registers are inputs to the instruction that the interpreter will run.
To avoid false positive asserts, this change adds a parameter to Flush
that controls whether to skip the asserts for discarded registers.
Additionally, an assert for discarded registers is added to
Arm64FPRCache::Flush. (Previously JitArm64 asserted for GPRs (and CRs)
only, whereas Jit64 asserted both for GPRs and FPRs. I most likely
didn't think of FPRs when writing 34b0a6ea90.)
2024-04-01 16:24:26 +02:00
2625 changed files with 525407 additions and 722216 deletions
If you downloaded Android Studio, install it with the default options and open the project located in `dolphin/Source/Android`
Install Android Studio with the default options if you do not already have it.
## Setting Up Android Studio
1.Wait for background tasks to complete on the bottom of the window.
2.Launch the Android SDK Manager by clicking on its icon in Android Studio's main toolbar:
![Android Studio Package Icon][package-icon]
3. Install or update the SDK Platform. Choose the API level as defined in the app module's [build.gradle](Source/Android/app/build.gradle#L7) file.
4. Install a CMake version as defined in the app module's [build.gradle](Source/Android/app/build.gradle#L99) file. The option won't appear until you select `Show Package Details`.
5. Select `Build Variants` on the left side of the window to choose the build variant and ABI you would like to compile for the `:app` module.
6. Select the green hammer icon in the main toolbar to build and create the apk in `Source/Android/app/build/outputs/apk`
1.Open the `Source/Android` project in Android Studio, let any background tasks finish, and Android Studio will automatically download the required SDK components and tooling.
2.Use the hammer icon or **Build > Assemble 'app' Run Configuration** to compile the `:app` module, then choose **Build > Generate App Bundles or APKs > Generate APKs** to produce the APK in `Source/Android/app/build/outputs/apk`.
## Import the Dolphin code style
The project maintains a custom IntelliJ/Android Studio style file to keep Java and Kotlin formatting consistent.
* Go to **File > Settings > Editor > Code Style** (or **Android Studio > Settings > Editor > Code Style** on macOS).
* Click the gear icon and choose **Import Scheme**.
* Select `Source/Android/code-style-java.xml` from the repository.
* Ensure that Dolphin-Java is selected.
## Format code before opening a pull request
Before committing or submitting a pull request, reformat any Java or Kotlin files you modified:
* Use **Code > Reformat Code** (or press `Ctrl+Alt+L`/`⌥⌘L` on macOS) with the Dolphin code style selected.
* Re-run formatting after edits to keep spacing, imports, and wrapping consistent with the rest of the project.
## Compiling from the Command-Line
For command-line users, any task may be executed with `cd Source/Android` followed by `gradlew <task-name>`. In particular, `gradlew assemble` builds debug and release versions of the application (which are placed in `Source/Android/app/build/outputs/apk`).
set(USE_SYSTEM_${upperlib}""CACHESTRING"Use system ${library} instead of bundled. ON - Always use system and fail if unavailable, OFF - Always use bundled, AUTO - Use system if available, otherwise use bundled, blank - Delegate to USE_SYSTEM_LIBS. Default is blank.")
message(FATAL_ERROR"OProfile not found. Can't build profiling support.")
message(FATAL_ERROR"Couldn't find libudev. Can't build hardware database.\nDisable ENABLE_HWDB if you wish to build without hardware database support")
This guide is for developers who wish to contribute to the Dolphin codebase. It will detail how to properly style and format code to fit this project. This guide also offers suggestions on specific functions and other varia that may be used in code.
This guide is for developers who wish to contribute to the Dolphin codebase. It details how to properly style and format code for this project. This guide also offers suggestions on specific functions and other elements that may be used in code.
Following this guide and formatting your code as detailed will likely get your pull request merged much faster than if you don't (assuming the written code has no mistakes in itself).
Following this guide and formatting your code as detailed will likely get your pull request merged much faster than if you don't (assuming the code itself has no mistakes).
This project uses clang-format (stable branch) to check for common style issues. In case of conflicts between this guide and clang-format rules, the latter should be followed instead of this guide.
This project uses clang-format 19.1 to check for common style issues. In case of conflicts between this guide and clang-format rules, the latter should be followed instead of this guide.
## <a name="intro-formatting-issues"></a>Checking and fixing formatting issues
@@ -49,7 +49,7 @@ In most cases, clang-format can and **should** be used to automatically reformat
- Formatting issues can be checked for before committing with a lint script that is included with the codebase. To enable it as a pre-commit hook (assuming you are in the repository root):
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
OatmealDome
JosJuice
Admiral H. Curtiss
JMC47
Jordan Woyak
Anarky
Sintendo
Craig Carnell
Joshua Vandaële
Dentomologist
LillyJadeKatrin
Tillmann Karras
Biendeo
Jason E. Hale
Martino Fontana
iwubcode
cristian64
Naim2000
Simonx22
da pwo
OatmealDome
AndrewGDX
TellowKrinkle
VampireFlower
iTrooz
Sepalani
Mateus B. Cassiano
cobalt2727
TryTwo
fizzlepicklepop
dreamsyntax
Xphalnos
Matthieu Speder
Sam Belliveau
Farmerbilly27
Ryan McGrath
Matheus Willder
JordanTheToaster
Marocco2
Geotale
Pokechu22
Alex Harrison
AGuy27
CrossVR
Maxim Cournoyer
Amphitryon
oltolm
ITotalJustice
Noah Pistilli
Shawn Rast
Dr. Dystopia
Javier Martinez
CostPerUnit
icup321
Sketch
fothugiyo
y21
Alfred Wingate
fireworksordie
Filippo Tarpini
fox8091
Mihai Brodschi
xperia64
Sanjay Govind
Zopolis4
Shawn Hoffman
Nitch2024
vyuuui
rsgnz
Luz Paz
Sander Sweers
mitaclaw
MackdannyTwitch
Nejsplitter
Florin9doi
Thales MG
Aep
Aneesh Maganti
Niel Lebeck
Ryan Gabel
Xphalnos
Toni
Maxim Cournoyer
Brad Smith
Daniel Peukert
Ferdi265
CasualPokePlayer
Nystrata
Charlese2
Gamer64
Amber Brault