Add filename and line number back to esp log

Previously security eFuses were only burnt if the flash was not encrypted
yet.
To enhance robustness of the security eFuse settings their correct setup
should be verified on each bootup. Else it would be possible for an
already encrypted ESP to be reflashed with firmware containing updated,
more restrictive eFuse settings without them ever being applied.
Additionally this change enables easy, secure use of ESPs with host sidee
flash preencryption. Flash preencryption by the host computer performing
the programming procedure can speed up the programming process by a great
deal since the flash no longer needs to be read, erased and written again
by the bootloader self-encryption routines. Additionally it avoids
bricking of ESPs through interruption of the self-ecnryption procedure.
Without this change the host would have to set up all fuses in the ESP
correctly by itself, duplicating the fuse configuration code already
present in the bootloader and creating additional maintenance burden for
the host software if anything about the fuse setup logic changes.
This commit changes the security eFuse configuration logic to always burn
any configured security eFuses on bootup, regardless of current flash
encryption status.

.codespellrc

@@ -0,0 +1,4 @@
+[codespell]
+skip = build,*.yuv,components/fatfs/src/*,alice.txt,*.rgb,components/wpa_supplicant/*,components/esp_wifi/*,*.pem,components/newlib/COPYING.*,docs/sphinx-known-warnings.txt
+ignore-words-list = ser,dout,rsource,fram,inout,shs,ans,aci,unstall,unstalling,hart,wheight,wel,ot,fane,assertIn,registr,oen,parms
+write-changes = true

.flake8

@@ -1,165 +0,0 @@
-[flake8]
-
-select =
-    # Full lists are given in order to suppress all errors from other plugins
-    # Full list of pyflakes error codes:
-    F401,           # module imported but unused
-    F402,           # import module from line N shadowed by loop variable
-    F403,           # 'from module import *' used; unable to detect undefined names
-    F404,           # future import(s) name after other statements
-    F405,           # name may be undefined, or defined from star imports: module
-    F406,           # 'from module import *' only allowed at module level
-    F407,           # an undefined __future__ feature name was imported
-    F601,           # dictionary key name repeated with different values
-    F602,           # dictionary key variable name repeated with different values
-    F621,           # too many expressions in an assignment with star-unpacking
-    F622,           # two or more starred expressions in an assignment (a, *b, *c = d)
-    F631,           # assertion test is a tuple, which are always True
-    F701,           # a break statement outside of a while or for loop
-    F702,           # a continue statement outside of a while or for loop
-    F703,           # a continue statement in a finally block in a loop
-    F704,           # a yield or yield from statement outside of a function
-    F705,           # a return statement with arguments inside a generator
-    F706,           # a return statement outside of a function/method
-    F707,           # an except: block as not the last exception handler
-    F721, F722,     #    doctest syntax error syntax error in forward type annotation
-    F811,           # redefinition of unused name from line N
-    F812,           # list comprehension redefines name from line N
-    F821,           # undefined name name
-    F822,           # undefined name name in __all__
-    F823,           # local variable name referenced before assignment
-    F831,           # duplicate argument name in function definition
-    F841,           # local variable name is assigned to but never used
-    F901,           # raise NotImplemented should be raise NotImplementedError
-
-    # Full list of pycodestyle violations:
-    E101,           # indentation contains mixed spaces and tabs
-    E111,           # indentation is not a multiple of four
-    E112,           # expected an indented block
-    E113,           # unexpected indentation
-    E114,           # indentation is not a multiple of four (comment)
-    E115,           # expected an indented block (comment)
-    E116,           # unexpected indentation (comment)
-    E121,           # continuation line under-indented for hanging indent
-    E122,           # continuation line missing indentation or outdented
-    E123,           # closing bracket does not match indentation of opening bracket's line
-    E124,           # closing bracket does not match visual indentation
-    E125,           # continuation line with same indent as next logical line
-    E126,           # continuation line over-indented for hanging indent
-    E127,           # continuation line over-indented for visual indent
-    E128,           # continuation line under-indented for visual indent
-    E129,           # visually indented line with same indent as next logical line
-    E131,           # continuation line unaligned for hanging indent
-    E133,           # closing bracket is missing indentation
-    E201,           # whitespace after '('
-    E202,           # whitespace before ')'
-    E203,           # whitespace before ':'
-    E211,           # whitespace before '('
-    E221,           # multiple spaces before operator
-    E222,           # multiple spaces after operator
-    E223,           # tab before operator
-    E224,           # tab after operator
-    E225,           # missing whitespace around operator
-    E226,           # missing whitespace around arithmetic operator
-    E227,           # missing whitespace around bitwise or shift operator
-    E228,           # missing whitespace around modulo operator
-    E231,           # missing whitespace after ',', ';', or ':'
-    E241,           # multiple spaces after ','
-    E242,           # tab after ','
-    E251,           # unexpected spaces around keyword / parameter equals
-    E261,           # at least two spaces before inline comment
-    E262,           # inline comment should start with '# '
-    E265,           # block comment should start with '# '
-    E266,           # too many leading '#' for block comment
-    E271,           # multiple spaces after keyword
-    E272,           # multiple spaces before keyword
-    E273,           # tab after keyword
-    E274,           # tab before keyword
-    E275,           # missing whitespace after keyword
-    E301,           # expected 1 blank line, found 0
-    E302,           # expected 2 blank lines, found 0
-    E303,           # too many blank lines
-    E304,           # blank lines found after function decorator
-    E305,           # expected 2 blank lines after end of function or class
-    E306,           # expected 1 blank line before a nested definition
-    E401,           # multiple imports on one line
-    E402,           # module level import not at top of file
-    E501,           # line too long (82 > 79 characters)
-    E502,           # the backslash is redundant between brackets
-    E701,           # multiple statements on one line (colon)
-    E702,           # multiple statements on one line (semicolon)
-    E703,           # statement ends with a semicolon
-    E704,           # multiple statements on one line (def)
-    E711,           # comparison to None should be 'if cond is None:'
-    E712,           # comparison to True should be 'if cond is True:' or 'if cond:'
-    E713,           # test for membership should be 'not in'
-    E714,           # test for object identity should be 'is not'
-    E721,           # do not compare types, use 'isinstance()'
-    E722,           # do not use bare except, specify exception instead
-    E731,           # do not assign a lambda expression, use a def
-    E741,           # do not use variables named 'l', 'O', or 'I'
-    E742,           # do not define classes named 'l', 'O', or 'I'
-    E743,           # do not define functions named 'l', 'O', or 'I'
-    E901,           # SyntaxError or IndentationError
-    E902,           # IOError
-    W191,           # indentation contains tabs
-    W291,           # trailing whitespace
-    W292,           # no newline at end of file
-    W293,           # blank line contains whitespace
-    W391,           # blank line at end of file
-    W503,           # line break before binary operator
-    W504,           # line break after binary operator
-    W505,           # doc line too long (82 > 79 characters)
-    W601,           # .has_key() is deprecated, use 'in'
-    W602,           # deprecated form of raising exception
-    W603,           # '<>' is deprecated, use '!='
-    W604,           # backticks are deprecated, use 'repr()'
-    W605,           # invalid escape sequence 'x'
-    W606,           # 'async' and 'await' are reserved keywords starting with Python 3.7
-
-    # Full list of flake8 violations
-    E999,           # failed to compile a file into an Abstract Syntax Tree for the plugins that require it
-
-    # Full list of mccabe violations
-    C901            # complexity value provided by the user
-
-ignore =
-    E221,           # multiple spaces before operator
-    E231,           # missing whitespace after ',', ';', or ':'
-    E241,           # multiple spaces after ','
-    W503,           # line break before binary operator
-    W504            # line break after binary operator
-
-max-line-length = 160
-
-show_source = True
-
-statistics = True
-
-exclude =
-    .git,
-    __pycache__,
-    # submodules
-        components/bootloader/subproject/components/micro-ecc/micro-ecc,
-        components/bt/host/nimble/nimble,
-        components/cmock/CMock,
-        components/json/cJSON,
-        components/mbedtls/mbedtls,
-        components/openthread/openthread,
-        components/unity/unity,
-        components/spiffs/spiffs,
-    # autogenerated scripts
-        components/protocomm/python/constants_pb2.py,
-        components/protocomm/python/sec0_pb2.py,
-        components/protocomm/python/sec1_pb2.py,
-        components/protocomm/python/sec2_pb2.py,
-        components/protocomm/python/session_pb2.py,
-        components/wifi_provisioning/python/wifi_ctrl_pb2.py,
-        components/wifi_provisioning/python/wifi_scan_pb2.py,
-        components/wifi_provisioning/python/wifi_config_pb2.py,
-        components/wifi_provisioning/python/wifi_constants_pb2.py,
-        components/esp_local_ctrl/python/esp_local_ctrl_pb2.py,
-
-per-file-ignores =
-    # Sphinx conf.py files use star imports to setup config variables
-        docs/conf_common.py: F405

.github/ISSUE_TEMPLATE/01_build_install_bug.yml

@@ -95,6 +95,26 @@ body:
       render: plain
     validations:
       required: false
+  - type: textarea
+    id: diag
+    attributes:
+      label: Diagnostic report archive.
+      description: |
+        Diagnostic report for ESP-IDF created using [idf.py diag](https://docs.espressif.com/projects/esp-idf/en/latest/esp32/api-guides/tools/idf-diag.html) or [esp-idf-diag](https://github.com/espressif/esp-idf-diag). The `idf.py diag` command is available beginning with ESP-IDF version 5.5. For older versions, you may want to consider using the `esp-idf-diag` command.
+
+        In your project directory, execute the following command:
+
+        Using `idf.py diag`
+           1. idf.py diag
+
+        Using `esp-idf-diag`
+           1. pip install esp-idf-diag
+           2. esp-idf-diag create
+
+        Once the report is generated, the tool will guide you with the next steps.
+      placeholder: Please attach the diagnostic report zip file here.
+    validations:
+      required: false
   - type: textarea
     id: more-info
     attributes:

.github/ISSUE_TEMPLATE/02_runtime_bug.yml

@@ -123,6 +123,26 @@ body:
       render: plain
     validations:
       required: false
+  - type: textarea
+    id: diag
+    attributes:
+      label: Diagnostic report archive.
+      description: |
+        Diagnostic report for ESP-IDF created using [idf.py diag](https://docs.espressif.com/projects/esp-idf/en/latest/esp32/api-guides/tools/idf-diag.html) or [esp-idf-diag](https://github.com/espressif/esp-idf-diag). The `idf.py diag` command is available beginning with ESP-IDF version 5.5. For older versions, you may want to consider using the `esp-idf-diag` command.
+
+        In your project directory, execute the following command:
+
+        Using `idf.py diag`
+           1. idf.py diag
+
+        Using `esp-idf-diag`
+           1. pip install esp-idf-diag
+           2. esp-idf-diag create
+
+        Once the report is generated, the tool will guide you with the next steps.
+      placeholder: Please attach the diagnostic report zip file here.
+    validations:
+      required: false
   - type: textarea
     id: more-info
     attributes:

.github/dangerjs/.gitignore

@@ -1,5 +0,0 @@
-# Transpiled JavaScript (if any)
-dist
-
-# Installed dependencies
-node_modules

.github/dangerjs/README.md

@@ -1,47 +0,0 @@
-# DangerJS pull request automatic review tool - GitHub
-
-## Implementation
-The main development is done in Espressif Gitlab project.
-Espressif [GitHub project espressif/esp-idf](https://github.com/espressif/esp-idf) is only a public mirror. 
-
-Therefore, all changes and updates to DangerJS files (`.github/dangerjs`) must be made via MR in the **Gitlab** repository by Espressif engineer. 
-
-When adding a new Danger rule or updating existing one, might be a good idea to test it on the developer's fork of GitHub project. This way, the new feature can be tested using a GitHub action without concern of damaging Espressif's GitHub repository.
-
-Danger for Espressif GitHub is implemented in TypeScript. This makes the code more readable and robust than plain JavaScript. 
-Compilation to JavaScript code (using `tsc`) is not necessary; Danger handles TypeScript natively.
-
-A good practice is to store each Danger rule in a separate module, and then import these modules into the main Danger file `.github/dangerjs/dangerfile.ts` (see how this is done for currently present modules when adding a new one).
-
-If the Danger module (new check/rule) uses an external NPM module (e.g. `axios`), be sure to add this dependency to `.github/dangerjs/package.json` and also update `.github/dangerjs/package-lock.json`.
-
-In the GitHub action, `danger` is not installed globally (nor are its dependencies) and the `npx` call is used to start the `danger` checks in CI.
-
-
-## Adding new Danger rule
-For local development you can use following strategy
-
-#### Install dependencies
-```sh
-cd .github/dangerjs
-npm install
-```
-(If the IDE still shows compiler/typing errors, reload the IDE window.)
-
-#### Add new code as needed or make updates
-
-#### Test locally
-Danger rules can be tested locally (without running the GitHub action pipeline). 
-To do this, you have to first export the ENV variables used by Danger in the local terminal:
-
-```sh
-export GITHUB_TOKEN='**************************************'
-```
-
-Then you can call Danger by:
-```sh
-cd .github/dangerjs
-
-danger pr https://github.com/espressif/esp-idf/pull/<number_of_pull_request> 
-```
-The result will be displayed in your terminal.

.github/dangerjs/dangerfile.ts

@@ -1,48 +0,0 @@
-import { DangerResults } from "danger";
-declare const results: DangerResults;
-declare const message: (message: string, results?: DangerResults) => void;
-declare const markdown: (message: string, results?: DangerResults) => void;
-
-// Import modules with danger rules
-// (Modules with checks are stored in ".github/dangerjs/<module_name>.ts". To import them, use path relative to "dangerfile.ts")
-import prCommitsTooManyCommits from "./prCommitsTooManyCommits";
-import prDescription from "./prDescription";
-import prTargetBranch from "./prTargetBranch";
-import prInfoContributor from "./prInfoContributor";
-import prCommitMessage from "./prCommitMessage";
-
-async function runDangerRules(): Promise<void> {
-    // Message to contributor about review and merge process
-    const prInfoContributorMessage: string = await prInfoContributor();
-    markdown(prInfoContributorMessage);
-
-    // Run danger checks
-    prCommitsTooManyCommits();
-    prDescription();
-    prTargetBranch();
-    prCommitMessage();
-
-    // Add success log if no issues
-    const dangerFails: number = results.fails.length;
-    const dangerWarns: number = results.warnings.length;
-    const dangerInfos: number = results.messages.length;
-    if (!dangerFails && !dangerWarns && !dangerInfos) {
-        return message("Good Job! All checks are passing!");
-    }
-
-    // Add retry link
-    addRetryLink();
-}
-
-runDangerRules();
-
-function addRetryLink(): void {
-    const serverUrl: string | undefined = process.env.GITHUB_SERVER_URL;
-    const repoName: string | undefined = process.env.GITHUB_REPOSITORY;
-    const runId: string | undefined = process.env.GITHUB_RUN_ID;
-
-    const retryLinkUrl: string = `${serverUrl}/${repoName}/actions/runs/${runId}`;
-    const retryLink: string = `<sub>:repeat: You can re-run automatic PR checks by retrying the <a href="${retryLinkUrl}">DangerJS action</a></sub>`;
-
-    markdown(retryLink);
-}

.github/dangerjs/package.json

@@ -1,18 +0,0 @@
-{
-    "name": "dangerjs-github",
-    "description": "GitHub PR reviewing with DangerJS",
-    "main": "dangerfile.ts",
-    "keywords": [],
-    "author": "",
-    "license": "ISC",
-    "dependencies": {
-        "axios": "^1.3.3",
-        "danger": "^11.2.3",
-        "request": "^2.88.2",
-        "sync-request": "^6.1.0",
-        "typescript": "^5.0.3"
-    },
-    "devDependencies": {
-        "@types/node": "^18.15.11"
-    }
-}

.github/dangerjs/prCommitMessage.ts

@@ -1,67 +0,0 @@
-import { DangerDSLType, DangerResults } from "danger";
-declare const danger: DangerDSLType;
-declare const warn: (message: string, results?: DangerResults) => void;
-
-interface Commit {
-    message: string;
-}
-
-/**
- * Check if commit messages are sufficiently descriptive (not too short).
- *
- * Search for commit messages that appear to be automatically generated or temporary messages and report them.
- *
- * @dangerjs WARN
- */
-export default function (): void {
-    const prCommits: Commit[] = danger.git.commits;
-
-    const detectRegexes: RegExp[] = [
-        /^Merge pull request #\d+ from .*/i, // Automatically generated message by GitHub
-        /^Merged .+:.+ into .+/i, // Automatically generated message by GitHub
-        /^Automatic merge by GitHub Action/i, // Automatically generated message by GitHub
-        /^Merge branch '.*' of .+ into .+/i, // Automatically generated message by GitHub
-        /^Create\s[a-zA-Z0-9_.-]+(\.[a-zA-Z0-9]{1,4})?(?=\s|$)/, // Automatically generated message by GitHub using UI
-        /^Delete\s[a-zA-Z0-9_.-]+(\.[a-zA-Z0-9]{1,4})?(?=\s|$)/, // Automatically generated message by GitHub using UI
-        /^Update\s[a-zA-Z0-9_.-]+(\.[a-zA-Z0-9]{1,4})?(?=\s|$)/, // Automatically generated message by GitHub using UI
-        /^Initial commit/i, // Automatically generated message by GitHub
-        /^WIP.*/i, // Message starts with prefix "WIP"
-        /^Cleaned.*/i, // Message starts "Cleaned", , probably temporary
-        /^Test:.*/i, // Message starts with "test" prefix, probably temporary
-        /clean ?up/i, // Message contains "clean up", probably temporary
-        /^[^A-Za-z0-9\s].*/, // Message starts with special characters
-    ];
-
-    let partMessages: string[] = [];
-
-    for (const commit of prCommits) {
-        const commitMessage: string = commit.message;
-        const commitMessageTitle: string = commit.message.split("\n")[0];
-
-        // Check if the commit message matches any regex from "detectRegexes"
-        if (detectRegexes.some((regex) => commitMessage.match(regex))) {
-            partMessages.push(
-                `- the commit message \`${commitMessageTitle}\` appears to be a temporary or automatically generated message`
-            );
-            continue;
-        }
-
-        // Check if the commit message is not too short
-        const shortCommitMessageThreshold: number = 20; // commit message is considered too short below this number of characters
-        if (commitMessage.length < shortCommitMessageThreshold) {
-            partMessages.push(
-                `- the commit message \`${commitMessageTitle}\` may not be sufficiently descriptive`
-            );
-        }
-    }
-
-    // Create report
-    if (partMessages.length) {
-        partMessages.sort();
-        let dangerMessage = `\nSome issues found for the commit messages in this MR:\n${partMessages.join(
-            "\n"
-        )}
-		\nPlease consider updating these commit messages.`;
-        warn(dangerMessage);
-    }
-}

.github/dangerjs/prCommitsTooManyCommits.ts

@@ -1,19 +0,0 @@
-import { DangerDSLType, DangerResults } from "danger";
-declare const danger: DangerDSLType;
-declare const message: (message: string, results?: DangerResults) => void;
-
-/**
- * Check if pull request has not an excessive numbers of commits (if squashed)
- *
- * @dangerjs INFO
- */
-export default function (): void {
-    const tooManyCommitThreshold: number = 2; // above this number of commits, squash commits is suggested
-    const prCommits: number = danger.github.commits.length;
-
-    if (prCommits > tooManyCommitThreshold) {
-        return message(
-            `You might consider squashing your ${prCommits} commits (simplifying branch history).`
-        );
-    }
-}

.github/dangerjs/prDescription.ts

@@ -1,19 +0,0 @@
-import { DangerDSLType, DangerResults } from "danger";
-declare const danger: DangerDSLType;
-declare const warn: (message: string, results?: DangerResults) => void;
-
-/**
- * Check if pull request has has a sufficiently accurate description
- *
- * @dangerjs WARN
- */
-export default function (): void {
-    const prDescription: string = danger.github.pr.body;
-    const shortPrDescriptionThreshold: number = 100; // Description is considered too short below this number of characters
-
-    if (prDescription.length < shortPrDescriptionThreshold) {
-        return warn(
-            "The PR description looks very brief, please check if more details can be added."
-        );
-    }
-}

.github/dangerjs/prInfoContributor.ts

@@ -1,58 +0,0 @@
-import { DangerDSLType } from "danger";
-declare const danger: DangerDSLType;
-
-interface Contributor {
-    login?: string;
-}
-
-const authorLogin = danger.github.pr.user.login;
-const messageKnownContributor: string = `
-***
-👋 **Hi ${authorLogin}**, thank you for your another contribution to \`espressif/esp-idf\` project!
-
-If the change is approved and passes the tests in our internal git repository, it will appear in this public Github repository on the next sync.
-***
-`;
-
-const messageFirstContributor: string = `
-***
-👋 **Welcome ${authorLogin}**, thank you for your first contribution to \`espressif/esp-idf\` project!
-
-📘 Please check [Contributions Guide](https://docs.espressif.com/projects/esp-idf/en/latest/esp32/contribute/index.html#contributions-guide) for the contribution checklist, information regarding code and documentation style, testing and other topics.
-
-🖊️ Please also make sure you have **read and signed** the [Contributor License Agreement for espressif/esp-idf project](https://cla-assistant.io/espressif/esp-idf).
-
-#### Pull request review and merge process you can expect
-Espressif develops the ESP-IDF project in an internal repository (Gitlab). We do welcome contributions in the form of bug reports, feature requests and pull requests via this public GitHub repository.
-
-1. An internal issue has been created for the PR, we assign it to the relevant engineer
-2. They review the PR and either approve it or ask you for changes or clarifications
-3. Once the Github PR is approved, we synchronize it into our internal git repository
-4. In the internal git repository we do the final review, collect approvals from core owners and make sure all the automated tests are passing
-    - At this point we may do some adjustments to the proposed change, or extend it by adding tests or documentation.
-5. If the change is approved and passes the tests it is merged into the \`master\` branch
-6. On next sync from the internal git repository merged change will appear in this public Github repository
-
-***
-`;
-
-/**
- * Check whether the author of the pull request is known or a first-time contributor, and add a message to the PR with information about the review and merge process.
- */
-export default async function (): Promise<string> {
-    const contributors = await danger.github.api.repos.listContributors({
-        owner: danger.github.thisPR.owner,
-        repo: danger.github.thisPR.repo,
-    });
-
-    const contributorsData: Contributor[] = contributors.data;
-    const knownContributors: (string | undefined)[] = contributorsData.map(
-        (contributor: Contributor) => contributor.login
-    );
-
-    if (knownContributors.includes(authorLogin)) {
-        return messageKnownContributor;
-    } else {
-        return messageFirstContributor;
-    }
-}

.github/dangerjs/prTargetBranch.ts

@@ -1,19 +0,0 @@
-import { DangerDSLType, DangerResults } from "danger";
-declare const danger: DangerDSLType;
-declare const fail: (message: string, results?: DangerResults) => void;
-
-/**
- * Check if the target branch is "master"
- *
- * @dangerjs FAIL
- */
-export default function (): void {
-    const prTargetBranch: string = danger.github?.pr?.base?.ref;
-
-    if (prTargetBranch !== "master") {
-        return fail(`
-        The target branch for this pull request should be \`master\`.\n
-        If you would like to add this feature to the release branch, please state this in the PR description and we will consider backporting it.
-        `);
-    }
-}

.github/dangerjs/tsconfig.json

@@ -1,17 +0,0 @@
-{
-    "compilerOptions": {
-        "module": "commonjs",
-        "moduleResolution": "node",
-        "esModuleInterop": true,
-        "target": "es6",
-        "noImplicitAny": true,
-        "noUnusedParameters": true,
-        "strictNullChecks": true,
-        "sourceMap": true,
-        "removeComments": true,
-        "outDir": "./dist"
-    },
-    "include": [
-        "./*.ts"
-    ]
-}

.github/dependabot.yml

@@ -1,15 +0,0 @@
-version: 2
-updates:
-  - package-ecosystem: "all"
-    directory: "/"
-    schedule:
-      interval: "weekly"
-    ignore:
-      - directory: ".gitlab/dangerjs"
-        patterns:
-          - "package-lock.json"
-      - directory: ".github/dangerjs"
-        patterns:
-          - "package-lock.json"
-    # Disable "version updates" (keep only "security updates")
-    open-pull-requests-limit: 0

.github/workflows/dangerjs.yml

@@ -9,28 +9,19 @@ permissions:
   contents: write
 
 jobs:
-  danger-check:
+  pull-request-style-linter:
     runs-on: ubuntu-latest
-    defaults:
-      run:
-        working-directory: .github/dangerjs
     steps:
     - name: Check out PR head
-      uses: actions/checkout@v3
+      uses: actions/checkout@v4
       with:
         ref: ${{ github.event.pull_request.head.sha }}
 
-    - name: Setup NodeJS environment
-      uses: actions/setup-node@v3
-      with:
-        node-version: 18
-        cache: npm
-        cache-dependency-path: .github/dangerjs/package-lock.json
-
-    - name: Install DangerJS dependencies
-      run: npm install
-
-    - name: Run DangerJS
-      run: npx danger ci --failOnErrors -v
+    - name: DangerJS pull request linter
+      uses: espressif/shared-github-dangerjs@v1
       env:
         GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+      with:
+        instructions-gitlab-mirror: 'true'
+        instructions-contributions-file: 'CONTRIBUTING.md'
+        instructions-cla-link: 'https://cla-assistant.io/espressif/esp-idf'

.github/workflows/issue_comment.yml

@@ -12,7 +12,7 @@ jobs:
     name: Sync Issue Comments to Jira
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v2
+      - uses: actions/checkout@v3
       - name: Sync issue comments to JIRA
         uses: espressif/github-actions/sync_issues_to_jira@master
         env:

.github/workflows/new_issues.yml

@@ -12,7 +12,7 @@ jobs:
     name: Sync issues to Jira
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v2
+      - uses: actions/checkout@v3
       - name: Sync GitHub issues to Jira project
         uses: espressif/github-actions/sync_issues_to_jira@master
         env:

.github/workflows/new_prs.yml

@@ -15,7 +15,7 @@ jobs:
     name: Sync PRs to Jira
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v2
+      - uses: actions/checkout@v3
       - name: Sync PRs to Jira project
         uses: espressif/github-actions/sync_issues_to_jira@master
         with:

.github/workflows/pr_approved.yml

@@ -11,7 +11,7 @@ jobs:
         (github.event.label.name == 'PR-Sync-Rebase')  ||
         (github.event.label.name == 'PR-Sync-Update')
     steps:
-      - uses: actions/checkout@v2
+      - uses: actions/checkout@v3
       - name: Sync approved PRs to internal codebase
         uses: espressif/github-actions/github_pr_to_internal_pr@master
         env:

.github/workflows/pre_commit_check.yml

@@ -14,7 +14,7 @@ jobs:
       SKIP: "cleanup-ignore-lists"  # Comma-separated string of ignored pre-commit check IDs
     steps:
       - name: Checkout
-        uses: actions/checkout@v2
+        uses: actions/checkout@v3
       - name: Fetch head and base refs
         # This is necessary for pre-commit to check the changes in the PR branch
         run: |
@@ -40,3 +40,5 @@ jobs:
             echo ""
             exit 1
           fi
+          # Run pre-commit for PowerShell scripts check
+          pre-commit run --hook-stage manual check-powershell-scripts --from-ref base_ref --to-ref pr_ref --show-diff-on-failure

.github/workflows/vulnerability_scan.yml

@@ -0,0 +1,35 @@
+name: Vulnerability scan
+
+on:
+  schedule:
+    - cron: '0 0 * * *'
+  workflow_dispatch:
+
+jobs:
+  vulnerability-scan:
+    strategy:
+      # We don't want to run all jobs in parallel, because this would
+      # overload NVD and we would get 503
+      max-parallel: 1
+      matrix:
+        # References/branches which should be scanned for vulnerabilities are
+        # defined in the VULNERABILITY_SCAN_REFS variable as json list.
+        # For example: ['master', 'release/v5.2', 'release/v5.1', 'release/v5.0', 'release/v4.4']
+        ref: ${{ fromJSON(vars.VULNERABILITY_SCAN_REFS) }}
+    name: Vulnerability scan
+    runs-on: ubuntu-latest
+    steps:
+      - name: Checkout repository
+        uses: actions/checkout@v4
+        with:
+          submodules: recursive
+          ref: ${{ matrix.ref }}
+
+      - name: Vulnerability scan
+        env:
+          SBOM_CHECK_LOCAL_DB: ${{ vars.SBOM_CHECK_LOCAL_DB }}
+          SBOM_MATTERMOST_WEBHOOK: ${{ secrets.SBOM_MATTERMOST_WEBHOOK }}
+          NVDAPIKEY: ${{ secrets.NVDAPIKEY }}
+        uses: espressif/esp-idf-sbom-action@master
+        with:
+          ref: ${{ matrix.ref }}

.gitignore

@@ -24,18 +24,6 @@ GPATH
 # cache dir
 .cache/
 
-# Components Unit Test Apps files
-components/**/build/
-components/**/build_*_*/
-components/**/sdkconfig
-components/**/sdkconfig.old
-
-# Example project files
-examples/**/build/
-examples/**/build_esp*_*/
-examples/**/sdkconfig
-examples/**/sdkconfig.old
-
 # Doc build artifacts
 docs/_build/
 docs/doxygen_sqlite3.db
@@ -44,16 +32,23 @@ docs/doxygen_sqlite3.db
 docs/_static/DejaVuSans.ttf
 docs/_static/NotoSansSC-Regular.otf
 
+# Components Unit Test Apps files
+components/**/build/
+components/**/build_*_*/
+components/**/sdkconfig
+components/**/sdkconfig.old
+
+# Example project files
+examples/**/build/
+examples/**/build_*_*/
+examples/**/sdkconfig
+examples/**/sdkconfig.old
+
 # Unit test app files
-tools/unit-test-app/sdkconfig
-tools/unit-test-app/sdkconfig.old
 tools/unit-test-app/build
 tools/unit-test-app/build_*_*/
-tools/unit-test-app/output
-tools/unit-test-app/test_configs
-
-# Unit Test CMake compile log folder
-log_ut_cmake
+tools/unit-test-app/sdkconfig
+tools/unit-test-app/sdkconfig.old
 
 # test application build files
 tools/test_apps/**/build/
@@ -61,7 +56,8 @@ tools/test_apps/**/build_*_*/
 tools/test_apps/**/sdkconfig
 tools/test_apps/**/sdkconfig.old
 
-TEST_LOGS
+TEST_LOGS/
+build_summary_*.xml
 
 # gcov coverage reports
 *.gcda
@@ -100,9 +96,13 @@ dependencies.lock
 managed_components
 
 # pytest log
+pytest-embedded/
+# legacy one
 pytest_embedded_log/
-list_job_*.txt
-size_info.txt
+list_job*.txt
+size_info*.txt
+XUNIT_RESULT*.xml
+.manifest_sha
 
 # clang config (for LSP)
 .clangd

.gitlab-ci.yml

@@ -3,8 +3,8 @@ workflow:
     # Disable those non-protected push triggered pipelines
     - if: '$CI_COMMIT_REF_NAME != "master" && $CI_COMMIT_BRANCH !~ /^release\/v/ && $CI_COMMIT_TAG !~ /^v\d+\.\d+(\.\d+)?($|-)/ && $CI_COMMIT_TAG !~ /^qa-test/ && $CI_PIPELINE_SOURCE == "push"'
       when: never
-    # when running merged result pipelines, it would create a temp commit id. use $CI_MERGE_REQUEST_SOURCE_BRANCH_SHA instead of $CI_COMMIT_SHA.
-    # Please use PIPELINE_COMMIT_SHA at all places that require a commit sha
+    # when running merged result pipelines, CI_COMMIT_SHA represents the temp commit it created.
+    # Please use PIPELINE_COMMIT_SHA at all places that require a commit sha of the original commit.
     - if: $CI_OPEN_MERGE_REQUESTS != null
       variables:
         PIPELINE_COMMIT_SHA: $CI_MERGE_REQUEST_SOURCE_BRANCH_SHA
@@ -18,14 +18,18 @@ workflow:
 # Place the default settings in `.gitlab/ci/common.yml` instead
 
 include:
+  - '.gitlab/ci/danger.yml'
   - '.gitlab/ci/common.yml'
   - '.gitlab/ci/rules.yml'
   - '.gitlab/ci/upload_cache.yml'
   - '.gitlab/ci/docs.yml'
   - '.gitlab/ci/static-code-analysis.yml'
+  - '.gitlab/ci/pre_commit.yml'
   - '.gitlab/ci/pre_check.yml'
   - '.gitlab/ci/build.yml'
   - '.gitlab/ci/integration_test.yml'
   - '.gitlab/ci/host-test.yml'
-  - '.gitlab/ci/target-test.yml'
   - '.gitlab/ci/deploy.yml'
+  - '.gitlab/ci/post_deploy.yml'
+  - '.gitlab/ci/retry_failed_jobs.yml'
+  - '.gitlab/ci/test-win.yml'

.gitlab/CODEOWNERS

@@ -47,12 +47,10 @@
 * @esp-idf-codeowners/other
 
 /.*                                   @esp-idf-codeowners/tools
-/.github/dangerjs/                    @esp-idf-codeowners/ci @esp-idf-codeowners/tools
-/.github/dependabot.yml               @esp-idf-codeowners/ci
+/.codespellrc                         @esp-idf-codeowners/ci
 /.github/workflows/                   @esp-idf-codeowners/ci
 /.gitlab-ci.yml                       @esp-idf-codeowners/ci
 /.gitlab/ci/                          @esp-idf-codeowners/ci
-/.gitlab/dangerjs/                    @esp-idf-codeowners/ci @esp-idf-codeowners/tools
 /.pre-commit-config.yaml              @esp-idf-codeowners/ci
 /.readthedocs.yml                     @esp-idf-codeowners/docs
 /.vale.ini                            @esp-idf-codeowners/docs
@@ -61,12 +59,14 @@
 /CONTRIBUTING.md                      @esp-idf-codeowners/docs
 /Kconfig                              @esp-idf-codeowners/build-config
 /README*.md                           @esp-idf-codeowners/docs
+/ROADMAP*.md                          @esp-idf-codeowners/docs
 /SUPPORT_POLICY*.md                   @esp-idf-codeowners/docs
 /add_path.sh                          @esp-idf-codeowners/tools
 /conftest.py                          @esp-idf-codeowners/ci
 /export.*                             @esp-idf-codeowners/tools
 /install.*                            @esp-idf-codeowners/tools
 /pytest.ini                           @esp-idf-codeowners/ci
+/ruff.toml                            @esp-idf-codeowners/tools
 /sdkconfig.rename                     @esp-idf-codeowners/build-config
 /sonar-project.properties             @esp-idf-codeowners/ci
 
@@ -87,6 +87,8 @@
 /components/esp_bootloader_format/    @esp-idf-codeowners/system @esp-idf-codeowners/app-utilities
 /components/esp_coex/                 @esp-idf-codeowners/wifi @esp-idf-codeowners/bluetooth @esp-idf-codeowners/ieee802154
 /components/esp_common/               @esp-idf-codeowners/system
+/components/esp_driver_*/             @esp-idf-codeowners/peripherals
+/components/esp_driver_sdmmc/         @esp-idf-codeowners/peripherals @esp-idf-codeowners/storage
 /components/esp_eth/                  @esp-idf-codeowners/network
 /components/esp_event/                @esp-idf-codeowners/system
 /components/esp_gdbstub/              @esp-idf-codeowners/debugging
@@ -96,6 +98,7 @@
 /components/esp_https_ota/            @esp-idf-codeowners/app-utilities
 /components/esp_https_server/         @esp-idf-codeowners/app-utilities
 /components/esp_hw_support/           @esp-idf-codeowners/system @esp-idf-codeowners/peripherals
+/components/esp_hw_support/lowpower/  @esp-idf-codeowners/power-management
 /components/esp_lcd/                  @esp-idf-codeowners/peripherals
 /components/esp_local_ctrl/           @esp-idf-codeowners/app-utilities
 /components/esp_mm/                   @esp-idf-codeowners/peripherals
@@ -104,22 +107,27 @@
 /components/esp_partition/            @esp-idf-codeowners/storage
 /components/esp_phy/                  @esp-idf-codeowners/bluetooth @esp-idf-codeowners/wifi @esp-idf-codeowners/ieee802154
 /components/esp_pm/                   @esp-idf-codeowners/power-management @esp-idf-codeowners/bluetooth @esp-idf-codeowners/wifi @esp-idf-codeowners/system
-/components/esp_psram/                @esp-idf-codeowners/peripherals @esp-idf-codeowners/system
+/components/esp_psram/                @esp-idf-codeowners/peripherals
+/components/esp_psram/system_layer/   @esp-idf-codeowners/peripherals @esp-idf-codeowners/system
 /components/esp_ringbuf/              @esp-idf-codeowners/system
 /components/esp_rom/                  @esp-idf-codeowners/system @esp-idf-codeowners/bluetooth @esp-idf-codeowners/wifi
+/components/esp_security/             @esp-idf-codeowners/security
 /components/esp_system/               @esp-idf-codeowners/system
+/components/esp_tee/                  @esp-idf-codeowners/security
 /components/esp_timer/                @esp-idf-codeowners/system
 /components/esp-tls/                  @esp-idf-codeowners/app-utilities
+/components/esp_vfs_*/                @esp-idf-codeowners/storage
+/components/esp_vfs_console/          @esp-idf-codeowners/storage @esp-idf-codeowners/system
 /components/esp_wifi/                 @esp-idf-codeowners/wifi
 /components/espcoredump/              @esp-idf-codeowners/debugging
 /components/esptool_py/               @esp-idf-codeowners/tools
 /components/fatfs/                    @esp-idf-codeowners/storage
-/components/fatfs/**/*.py             @esp-idf-codeowners/tools
 /components/freertos/                 @esp-idf-codeowners/system
 /components/hal/                      @esp-idf-codeowners/peripherals
+/components/hal/test_apps/crypto/     @esp-idf-codeowners/peripherals @esp-idf-codeowners/security
 /components/heap/                     @esp-idf-codeowners/system
 /components/http_parser/              @esp-idf-codeowners/app-utilities
-/components/idf_test/                 @esp-idf-codeowners/ci
+/components/idf_test/                 @esp-idf-codeowners/peripherals @esp-idf-codeowners/system
 /components/ieee802154/               @esp-idf-codeowners/ieee802154
 /components/json/                     @esp-idf-codeowners/app-utilities
 /components/linux/                    @esp-idf-codeowners/system
@@ -137,6 +145,7 @@
 /components/protocomm/                @esp-idf-codeowners/app-utilities/provisioning
 /components/pthread/                  @esp-idf-codeowners/system
 /components/riscv/                    @esp-idf-codeowners/system
+/components/rt/                       @esp-idf-codeowners/system
 /components/sdmmc/                    @esp-idf-codeowners/storage
 /components/soc/                      @esp-idf-codeowners/peripherals @esp-idf-codeowners/system
 /components/spi_flash/                @esp-idf-codeowners/peripherals
@@ -144,7 +153,7 @@
 /components/tcp_transport/            @esp-idf-codeowners/network
 /components/touch_element/            @esp-idf-codeowners/peripherals
 /components/ulp/                      @esp-idf-codeowners/system
-/components/unity/                    @esp-idf-codeowners/ci
+/components/unity/                    @esp-idf-codeowners/peripherals @esp-idf-codeowners/system
 /components/usb/                      @esp-idf-codeowners/peripherals/usb
 /components/vfs/                      @esp-idf-codeowners/storage
 /components/wear_levelling/           @esp-idf-codeowners/storage
@@ -152,18 +161,25 @@
 /components/wpa_supplicant/           @esp-idf-codeowners/wifi @esp-idf-codeowners/app-utilities/mbedtls
 /components/xtensa/                   @esp-idf-codeowners/system
 
-/docs/                                  @esp-idf-codeowners/docs
-/docs/en/api-guides/jtag-debugging/     @esp-idf-codeowners/debugging
-/docs/**/api-reference/bluetooth/       @esp-idf-codeowners/bluetooth
-/docs/**/api-reference/network/         @esp-idf-codeowners/network @esp-idf-codeowners/wifi
-/docs/**/api-reference/peripherals/     @esp-idf-codeowners/peripherals
-/docs/**/api-reference/peripherals/usb* @esp-idf-codeowners/peripherals @esp-idf-codeowners/peripherals/usb
-/docs/**/api-reference/protocols/       @esp-idf-codeowners/network @esp-idf-codeowners/app-utilities
-/docs/**/api-reference/provisioning/    @esp-idf-codeowners/app-utilities/provisioning
-/docs/**/api-reference/storage/         @esp-idf-codeowners/storage
-/docs/**/api-reference/system/          @esp-idf-codeowners/system
-/docs/**/security/                      @esp-idf-codeowners/security
-/docs/**/migration-guides/              @esp-idf-codeowners/docs @esp-idf-codeowners/all-maintainers
+/docs/                                      @esp-idf-codeowners/docs
+/docs/docs_not_updated/                     @esp-idf-codeowners/all-maintainers
+/docs/**/api-guides/tools/                  @esp-idf-codeowners/tools
+/docs/en/api-guides/core_dump.rst           @esp-idf-codeowners/debugging
+/docs/**/api-guides/wifi*                   @esp-idf-codeowners/wifi
+/docs/**/api-guides/esp-wifi-mesh.rst       @esp-idf-codeowners/wifi
+/docs/en/api-guides/jtag-debugging/         @esp-idf-codeowners/debugging
+/docs/**/api-reference/bluetooth/           @esp-idf-codeowners/bluetooth
+/docs/**/api-reference/network/             @esp-idf-codeowners/network @esp-idf-codeowners/wifi
+/docs/**/api-reference/peripherals/         @esp-idf-codeowners/peripherals
+/docs/**/api-reference/peripherals/usb*     @esp-idf-codeowners/peripherals @esp-idf-codeowners/peripherals/usb
+/docs/**/api-reference/peripherals/usb*/    @esp-idf-codeowners/peripherals @esp-idf-codeowners/peripherals/usb
+/docs/**/api-reference/protocols/           @esp-idf-codeowners/network @esp-idf-codeowners/app-utilities
+/docs/**/api-reference/provisioning/        @esp-idf-codeowners/app-utilities/provisioning
+/docs/**/api-reference/storage/             @esp-idf-codeowners/storage
+/docs/**/api-reference/system/              @esp-idf-codeowners/system
+/docs/**/security/                          @esp-idf-codeowners/security
+/docs/**/migration-guides/                  @esp-idf-codeowners/docs @esp-idf-codeowners/all-maintainers
+/docs/**/contribute/install-pre-commit-hook.rst @esp-idf-codeowners/ci @esp-idf-codeowners/tools
 
 /examples/README.md           @esp-idf-codeowners/docs @esp-idf-codeowners/ci
 /examples/**/*.py             @esp-idf-codeowners/ci @esp-idf-codeowners/tools
@@ -174,6 +190,8 @@
 /examples/cxx/                @esp-idf-codeowners/system
 /examples/ethernet/           @esp-idf-codeowners/network
 /examples/get-started/        @esp-idf-codeowners/system
+/examples/ieee802154/         @esp-idf-codeowners/ieee802154
+/examples/lowpower/           @esp-idf-codeowners/power-management @esp-idf-codeowners/system
 /examples/mesh/               @esp-idf-codeowners/wifi
 /examples/network/            @esp-idf-codeowners/network @esp-idf-codeowners/wifi
 /examples/openthread/         @esp-idf-codeowners/ieee802154
@@ -191,6 +209,7 @@
 
 /tools/                       @esp-idf-codeowners/tools
 /tools/ble/                   @esp-idf-codeowners/app-utilities
+/tools/bt/                    @esp-idf-codeowners/bluetooth
 /tools/catch/                 @esp-idf-codeowners/ci
 /tools/ci/                    @esp-idf-codeowners/ci
 /tools/cmake/                 @esp-idf-codeowners/build-config
@@ -202,13 +221,19 @@
 /tools/ldgen/                 @esp-idf-codeowners/build-config
 /tools/mass_mfg/              @esp-idf-codeowners/app-utilities
 /tools/mocks/                 @esp-idf-codeowners/system
-/tools/test_apps/README.md    @esp-idf-codeowners/docs @esp-idf-codeowners/ci
+
+/tools/test_apps/                    @esp-idf-codeowners/ci
+/tools/test_apps/README.md           @esp-idf-codeowners/docs @esp-idf-codeowners/ci
 
 ## Note: owners here should be the same as the owners for the same example subdir, above
 /tools/test_apps/build_system/       @esp-idf-codeowners/build-config
+/tools/test_apps/configs/            @esp-idf-codeowners/system
 /tools/test_apps/linux_compatible/   @esp-idf-codeowners/system
+/tools/test_apps/peripherals/        @esp-idf-codeowners/peripherals
+/tools/test_apps/phy/                @esp-idf-codeowners/bluetooth @esp-idf-codeowners/wifi @esp-idf-codeowners/ieee802154
 /tools/test_apps/protocols/          @esp-idf-codeowners/network @esp-idf-codeowners/app-utilities
 /tools/test_apps/security/           @esp-idf-codeowners/security
+/tools/test_apps/storage/            @esp-idf-codeowners/storage
 /tools/test_apps/system/             @esp-idf-codeowners/system
 
 /tools/test_apps/**/*.py             @esp-idf-codeowners/ci @esp-idf-codeowners/tools

.gitlab/ci/README.md

@@ -145,11 +145,11 @@ check if there's a suitable `.if-<if-anchor-you-need>` anchor
 1. if there is, create a rule following [`rules` Template Naming Rules](#rules-template-naming-rules).For detail information, please refer to [GitLab Documentation `rules-if`](https://docs.gitlab.com/ee/ci/yaml/README.html#rulesif). Here's an example.
 
     ```yaml
-    .rules:patterns:python-files:
+    .rules:patterns:clang_tidy:
       rules:
         - <<: *if-protected
         - <<: *if-dev-push
-          changes: *patterns-python-files
+          changes: *patterns-c-files
     ```
 
 2. if there isn't

.gitlab/ci/build.yml

@@ -1,7 +1,7 @@
 .build_template:
   stage: build
   extends:
-    - .after_script:build:ccache
+    - .after_script:build:ccache-show-stats:upload-failed-job-logs
   image: $ESP_ENV_IMAGE
   tags:
     - build
@@ -12,17 +12,16 @@
     IDF_CCACHE_ENABLE: "1"
   dependencies: []
 
-.build_cmake_template:
+.build_cmake_clang_template:
   extends:
     - .build_template
     - .before_script:build
-    - .after_script:build:ccache
+    - .after_script:build:ccache-show-stats
   dependencies: # set dependencies to null to avoid missing artifacts issue
   needs:
     - job: fast_template_app
       artifacts: false
-    - job: mr_variables
-      optional: true  # only MR pipelines would have this
+    - pipeline_variables
   artifacts:
     paths:
       # The other artifacts patterns are defined under tools/ci/artifacts_handler.py
@@ -33,30 +32,13 @@
       # keep the size info to help track the binary size
       - size_info.txt
       - "**/build*/size.json"
+    expire_in: 1 week
     when: always
-    expire_in: 4 days
-  script:
-    # CI specific options start from "--parallel-count xxx". could ignore when running locally
-    - run_cmd python tools/ci/ci_build_apps.py $TEST_DIR -v
-      -t $IDF_TARGET
-      --copy-sdkconfig
-      --parallel-count ${CI_NODE_TOTAL:-1}
-      --parallel-index ${CI_NODE_INDEX:-1}
-      --extra-preserve-dirs
-        examples/bluetooth/esp_ble_mesh/ble_mesh_console
-        examples/bluetooth/hci/controller_hci_uart_esp32
-        examples/wifi/iperf
-      --modified-components ${MR_MODIFIED_COMPONENTS}
-      --modified-files ${MR_MODIFIED_FILES}
-    - upload_artifacts_to_s3
-
-.build_cmake_clang_template:
-  extends:
-    - .build_cmake_template
   variables:
     IDF_TOOLCHAIN: clang
     TEST_BUILD_OPTS_EXTRA: ""
-    TEST_DIR: tools/test_apps/system/cxx_pthread_bluetooth
+    TEST_DIR: tools/test_apps/system/clang_build_test
+    PYTEST_IGNORE_COLLECT_IMPORT_ERROR: "1"
   script:
     # CI specific options start from "--parallel-count xxx". could ignore when running locally
     - run_cmd python tools/ci/ci_build_apps.py $TEST_DIR -v
@@ -67,278 +49,11 @@
       --modified-components ${MR_MODIFIED_COMPONENTS}
       --modified-files ${MR_MODIFIED_FILES}
       $TEST_BUILD_OPTS_EXTRA
-    - upload_artifacts_to_s3
-
-.build_pytest_template:
-  extends:
-    - .build_cmake_template
-  script:
-    # CI specific options start from "--parallel-count xxx". could ignore when running locally
-    - run_cmd python tools/ci/ci_build_apps.py $TEST_DIR -v
-      -t $IDF_TARGET
-      -m \"not host_test\"
-      --pytest-apps
-      --parallel-count ${CI_NODE_TOTAL:-1}
-      --parallel-index ${CI_NODE_INDEX:-1}
-      --collect-app-info "list_job_${CI_JOB_NAME_SLUG}.txt"
-      --modified-components ${MR_MODIFIED_COMPONENTS}
-      --modified-files ${MR_MODIFIED_FILES}
-    - upload_artifacts_to_s3
-
-.build_pytest_no_jtag_template:
-  extends:
-    - .build_cmake_template
-  script:
-    # CI specific options start from "--parallel-count xxx". could ignore when running locally
-    - run_cmd python tools/ci/ci_build_apps.py $TEST_DIR -v
-      -t $IDF_TARGET
-      -m \"not host_test and not jtag\"
-      --pytest-apps
-      --parallel-count ${CI_NODE_TOTAL:-1}
-      --parallel-index ${CI_NODE_INDEX:-1}
-      --collect-app-info "list_job_${CI_JOB_NAME_SLUG}.txt"
-      --modified-components ${MR_MODIFIED_COMPONENTS}
-      --modified-files ${MR_MODIFIED_FILES}
-    - upload_artifacts_to_s3
-
-.build_pytest_jtag_template:
-  extends:
-    - .build_cmake_template
-  script:
-    # CI specific options start from "--parallel-count xxx". could ignore when running locally
-    - run_cmd python tools/ci/ci_build_apps.py $TEST_DIR -v
-      -t $IDF_TARGET
-      -m \"not host_test and jtag\"
-      --pytest-apps
-      --parallel-count ${CI_NODE_TOTAL:-1}
-      --parallel-index ${CI_NODE_INDEX:-1}
-      --collect-app-info "list_job_${CI_JOB_NAME_SLUG}.txt"
-      --modified-components ${MR_MODIFIED_COMPONENTS}
-      --modified-files ${MR_MODIFIED_FILES}
-    - upload_artifacts_to_s3
-
-build_pytest_examples_esp32:
-  extends:
-    - .build_pytest_no_jtag_template
-    - .rules:build:example_test-esp32
-  parallel: 6
-  variables:
-    IDF_TARGET: esp32
-    TEST_DIR: examples
-
-build_pytest_examples_esp32s2:
-  extends:
-    - .build_pytest_no_jtag_template
-    - .rules:build:example_test-esp32s2
-  parallel: 3
-  variables:
-    IDF_TARGET: esp32s2
-    TEST_DIR: examples
-
-build_pytest_examples_esp32s3:
-  extends:
-    - .build_pytest_no_jtag_template
-    - .rules:build:example_test-esp32s3
-  parallel: 4
-  variables:
-    IDF_TARGET: esp32s3
-    TEST_DIR: examples
-
-build_pytest_examples_esp32c3:
-  extends:
-    - .build_pytest_no_jtag_template
-    - .rules:build:example_test-esp32c3
-  parallel: 4
-  variables:
-    IDF_TARGET: esp32c3
-    TEST_DIR: examples
-
-build_pytest_examples_esp32c2:
-  extends:
-    - .build_pytest_no_jtag_template
-    - .rules:build:example_test-esp32c2
-  parallel: 2
-  variables:
-    IDF_TARGET: esp32c2
-    TEST_DIR: examples
-
-build_pytest_examples_esp32c6:
-  extends:
-    - .build_pytest_no_jtag_template
-    - .rules:build:example_test-esp32c6
-  parallel: 2
-  variables:
-    IDF_TARGET: esp32c6
-    TEST_DIR: examples
-
-build_pytest_examples_esp32h2:
-  extends:
-    - .build_pytest_no_jtag_template
-    - .rules:build:example_test-esp32h2
-  parallel: 2
-  variables:
-    IDF_TARGET: esp32h2
-    TEST_DIR: examples
-
-build_pytest_examples_jtag:  # for all targets
-  extends:
-    - .build_pytest_jtag_template
-    - .rules:build:example_test
-  variables:
-    IDF_TARGET: all
-    TEST_DIR: examples
-
-build_pytest_components_esp32:
-  extends:
-    - .build_pytest_template
-    - .rules:build:component_ut-esp32
-  parallel: 5
-  variables:
-    IDF_TARGET: esp32
-    TEST_DIR: components
-
-build_pytest_components_esp32s2:
-  extends:
-    - .build_pytest_template
-    - .rules:build:component_ut-esp32s2
-  parallel: 4
-  variables:
-    IDF_TARGET: esp32s2
-    TEST_DIR: components
-
-build_pytest_components_esp32s3:
-  extends:
-    - .build_pytest_template
-    - .rules:build:component_ut-esp32s3
-  parallel: 4
-  variables:
-    IDF_TARGET: esp32s3
-    TEST_DIR: components
-
-build_pytest_components_esp32c3:
-  extends:
-    - .build_pytest_template
-    - .rules:build:component_ut-esp32c3
-  parallel: 4
-  variables:
-    IDF_TARGET: esp32c3
-    TEST_DIR: components
-
-build_pytest_components_esp32c2:
-  extends:
-    - .build_pytest_template
-    - .rules:build:component_ut-esp32c2
-  parallel: 3
-  variables:
-    IDF_TARGET: esp32c2
-    TEST_DIR: components
-
-build_pytest_components_esp32c6:
-  extends:
-    - .build_pytest_template
-    - .rules:build:component_ut-esp32c6
-  parallel: 3
-  variables:
-    IDF_TARGET: esp32c6
-    TEST_DIR: components
-
-build_pytest_components_esp32h2:
-  extends:
-    - .build_pytest_template
-    - .rules:build:component_ut-esp32h2
-  parallel: 4
-  variables:
-    IDF_TARGET: esp32h2
-    TEST_DIR: components
-
-build_only_components_apps:
-  extends:
-    - .build_cmake_template
-    - .rules:build:component_ut
-  parallel: 5
-  script:
-    - set_component_ut_vars
-    # CI specific options start from "--parallel-count xxx". could ignore when running locally
-    - run_cmd python tools/ci/ci_build_apps.py $COMPONENT_UT_DIRS -v
-      -t all
-      --parallel-count ${CI_NODE_TOTAL:-1}
-      --parallel-index ${CI_NODE_INDEX:-1}
-      --modified-components ${MR_MODIFIED_COMPONENTS}
-      --modified-files ${MR_MODIFIED_FILES}
-    - upload_artifacts_to_s3
-
-build_pytest_test_apps_esp32:
-  extends:
-    - .build_pytest_template
-    - .rules:build:custom_test-esp32
-  variables:
-    IDF_TARGET: esp32
-    TEST_DIR: tools/test_apps
-
-build_pytest_test_apps_esp32s2:
-  extends:
-    - .build_pytest_template
-    - .rules:build:custom_test-esp32s2
-  variables:
-    IDF_TARGET: esp32s2
-    TEST_DIR: tools/test_apps
-
-build_pytest_test_apps_esp32s3:
-  extends:
-    - .build_pytest_template
-    - .rules:build:custom_test-esp32s3
-  parallel: 2
-  variables:
-    IDF_TARGET: esp32s3
-    TEST_DIR: tools/test_apps
-
-build_pytest_test_apps_esp32c3:
-  extends:
-    - .build_pytest_template
-    - .rules:build:custom_test-esp32c3
-  variables:
-    IDF_TARGET: esp32c3
-    TEST_DIR: tools/test_apps
-
-build_pytest_test_apps_esp32c2:
-  extends:
-    - .build_pytest_template
-    - .rules:build:custom_test-esp32c2
-  variables:
-    IDF_TARGET: esp32c2
-    TEST_DIR: tools/test_apps
-
-build_pytest_test_apps_esp32c6:
-  extends:
-    - .build_pytest_template
-    - .rules:build:custom_test-esp32c6
-  variables:
-    IDF_TARGET: esp32c6
-    TEST_DIR: tools/test_apps
-
-build_pytest_test_apps_esp32h2:
-  extends:
-    - .build_pytest_template
-    - .rules:build:custom_test-esp32h2
-  variables:
-    IDF_TARGET: esp32h2
-    TEST_DIR: tools/test_apps
-
-build_only_tools_test_apps:
-  extends:
-    - .build_cmake_template
-    - .rules:build:custom_test
-  parallel: 9
-  script:
-    # CI specific options start from "--parallel-count xxx". could ignore when running locally
-    - run_cmd python tools/ci/ci_build_apps.py tools/test_apps -v
-      -t all
-      --parallel-count ${CI_NODE_TOTAL:-1}
-      --parallel-index ${CI_NODE_INDEX:-1}
-      --modified-components ${MR_MODIFIED_COMPONENTS}
-      --modified-files ${MR_MODIFIED_FILES}
-    - upload_artifacts_to_s3
+    - python tools/ci/artifacts_handler.py upload
 
+######################
+# build_template_app #
+######################
 .build_template_app_template:
   extends:
     - .build_template
@@ -350,12 +65,12 @@ build_only_tools_test_apps:
     BUILD_LOG_CMAKE: "${LOG_PATH}/cmake_@t_@w.txt"
     BUILD_COMMAND_ARGS: ""
   artifacts:
-    when: always
     paths:
       - log_template_app/*
       - size_info.txt
       - build_template_app/**/size.json
     expire_in: 1 week
+    when: always
   script:
     # Set the variable for 'esp-idf-template' testing
     - ESP_IDF_TEMPLATE_GIT=${ESP_IDF_TEMPLATE_GIT:-"https://github.com/espressif/esp-idf-template.git"}
@@ -374,100 +89,48 @@ fast_template_app:
     - .build_template_app_template
     - .rules:build:target_test
   stage: pre_check
+  tags: [fast_run, shiny]
   variables:
     BUILD_COMMAND_ARGS: "-p"
 #------------------------------------------------------------------------------
 
-build_examples_cmake_esp32:
+#######################
+# gnu_static_analyzer #
+#######################
+gcc_static_analyzer:
   extends:
-    - .build_cmake_template
-    - .rules:build:example_test-esp32
-  parallel: 8
+    - .build_template_app_template
+    - .rules:build:target_test
+  stage: pre_check
+  tags: [build, shiny]
   variables:
-    IDF_TARGET: esp32
-    TEST_DIR: examples
-
-build_examples_cmake_esp32s2:
-  extends:
-    - .build_cmake_template
-    - .rules:build:example_test-esp32s2
-  parallel: 7
-  variables:
-    IDF_TARGET: esp32s2
-    TEST_DIR: examples
-
-build_examples_cmake_esp32s3:
-  extends:
-    - .build_cmake_template
-    - .rules:build:example_test-esp32s3
-  parallel: 11
-  variables:
-    IDF_TARGET: esp32s3
-    TEST_DIR: examples
-
-build_examples_cmake_esp32c2:
-  extends:
-    - .build_cmake_template
-    - .rules:build:example_test-esp32c2
-  parallel: 7
-  variables:
-    IDF_TARGET: esp32c2
-    TEST_DIR: examples
-
-build_examples_cmake_esp32c3:
-  extends:
-    - .build_cmake_template
-    - .rules:build:example_test-esp32c3
-  parallel: 9
-  variables:
-    IDF_TARGET: esp32c3
-    TEST_DIR: examples
-
-build_examples_cmake_esp32c6:
-  extends:
-    - .build_cmake_template
-    - .rules:build:example_test-esp32c6
-  parallel: 11
-  variables:
-    IDF_TARGET: esp32c6
-    TEST_DIR: examples
-
-build_examples_cmake_esp32h2:
-  extends:
-    - .build_cmake_template
-    - .rules:build:example_test-esp32h2
-  parallel: 9
-  variables:
-    IDF_TARGET: esp32h2
-    TEST_DIR: examples
-
-build_examples_cmake_esp32p4:
-  extends:
-    - .build_cmake_template
-    - .rules:build:example_test-esp32p4
-  parallel: 4
-  variables:
-    IDF_TARGET: esp32p4
-    TEST_DIR: examples
+    CI_CCACHE_DISABLE: 1
+    ANALYZING_APP: "examples/get-started/hello_world"
+  script:
+    - echo "CONFIG_COMPILER_STATIC_ANALYZER=y" >> ${ANALYZING_APP}/sdkconfig.defaults
+    - python -m idf_build_apps build -v -p ${ANALYZING_APP} -t all
 
+########################################
+# Clang Build Apps Without Tests Cases #
+########################################
 build_clang_test_apps_esp32:
   extends:
     - .build_cmake_clang_template
-    - .rules:build:custom_test-esp32
+    - .rules:build
   variables:
     IDF_TARGET: esp32
 
 build_clang_test_apps_esp32s2:
   extends:
     - .build_cmake_clang_template
-    - .rules:build:custom_test-esp32s2
+    - .rules:build
   variables:
     IDF_TARGET: esp32s2
 
 build_clang_test_apps_esp32s3:
   extends:
     - .build_cmake_clang_template
-    - .rules:build:custom_test-esp32s3
+    - .rules:build
   variables:
     IDF_TARGET: esp32s3
 
@@ -475,81 +138,106 @@ build_clang_test_apps_esp32s3:
   extends:
     - .build_cmake_clang_template
   variables:
-    # For RISCV clang generates '.linker-options' sections of type 'llvm_linker_options' in asm files.
-    # See (https://llvm.org/docs/Extensions.html#linker-options-section-linker-options).
-    # Binutils gas ignores them with warning.
-    # TODO: LLVM-112, Use integrated assembler.
-    TEST_BUILD_OPTS_EXTRA: "--ignore-warning-str 'Warning: unrecognized section type'"
+    # https://reviews.llvm.org/D90108.
+    # GNU 'as' lets .weak override .globl since binutils-gdb
+    # https://github.com/bminor/binutils-gdb/commit/5ca547dc2399a0a5d9f20626d4bf5547c3ccfddd (1996)
+    # while MC lets the last directive win (PR38921).
+    # For RISCV chips we use integrated assembler by default, so suppress this warning to pass CI pipeline.
+    TEST_BUILD_OPTS_EXTRA: "--ignore-warning-str 'changed binding to STB_WEAK'"
 
 build_clang_test_apps_esp32c3:
   extends:
     - .build_clang_test_apps_riscv
-    - .rules:build:custom_test-esp32c3
+    - .rules:build
   variables:
     IDF_TARGET: esp32c3
 
 build_clang_test_apps_esp32c2:
   extends:
     - .build_clang_test_apps_riscv
-    - .rules:build:custom_test-esp32c2
+    - .rules:build
   variables:
     IDF_TARGET: esp32c2
 
 build_clang_test_apps_esp32c6:
   extends:
     - .build_clang_test_apps_riscv
-    - .rules:build:custom_test-esp32c6
-  # TODO: c6 builds fail in master due to missing headers
-  allow_failure: true
+    - .rules:build
   variables:
     IDF_TARGET: esp32c6
 
+build_clang_test_apps_esp32c5:
+  extends:
+    - .build_clang_test_apps_riscv
+    - .rules:build
+  variables:
+    IDF_TARGET: esp32c5
+
+build_clang_test_apps_esp32h2:
+  extends:
+    - .build_clang_test_apps_riscv
+    - .rules:build
+  variables:
+    IDF_TARGET: esp32h2
+
+build_clang_test_apps_esp32p4:
+  extends:
+    - .build_clang_test_apps_riscv
+    - .rules:build
+  variables:
+    IDF_TARGET: esp32p4
+
+######################
+# Build System Tests #
+######################
 .test_build_system_template:
   stage: host_test
   extends:
     - .build_template
     - .rules:build:check
+  dependencies: # set dependencies to null to avoid missing artifacts issue
   needs:
     - job: fast_template_app
       artifacts: false
       optional: true
+  artifacts:
+    reports:
+      junit: XUNIT_RESULT.xml
+    paths:
+      - XUNIT_RESULT.xml
+      - test_build_system
+    expire_in: 1 week
+    when: always
   script:
     - ${IDF_PATH}/tools/ci/test_configure_ci_environment.sh
     - cd ${IDF_PATH}/tools/test_build_system
-    - retry_failed git clone $KNOWN_FAILURE_CASES_REPO known_failure_cases
-    - pytest --parallel-count ${CI_NODE_TOTAL:-1} --parallel-index ${CI_NODE_INDEX:-1}
-      --work-dir ${CI_PROJECT_DIR}/test_build_system --junitxml=${CI_PROJECT_DIR}/XUNIT_RESULT.xml
-      --ignore-result-files known_failure_cases/known_failure_cases.txt
+    - python ${IDF_PATH}/tools/ci/get_known_failure_cases_file.py
+    - pytest
+      --cleanup-idf-copy
+      --parallel-count ${CI_NODE_TOTAL:-1}
+      --parallel-index ${CI_NODE_INDEX:-1}
+      --work-dir ${CI_PROJECT_DIR}/test_build_system
+      --junitxml ${CI_PROJECT_DIR}/XUNIT_RESULT.xml
+      --ignore-result-files ${KNOWN_FAILURE_CASES_FILE_NAME}
 
 pytest_build_system:
   extends: .test_build_system_template
   parallel: 3
-  artifacts:
-    paths:
-      - XUNIT_RESULT.xml
-      - test_build_system
-    when: always
-    expire_in: 2 days
-    reports:
-      junit: XUNIT_RESULT.xml
 
 pytest_build_system_macos:
   extends:
     - .test_build_system_template
     - .before_script:build:macos
+    - .after_script:build:macos:upload-failed-job-logs:ccache-show-stats
     - .rules:build:macos
   tags:
     - macos_shell
   parallel: 3
-  artifacts:
-    paths:
-      - XUNIT_RESULT.xml
-      - test_build_system
-    when: always
-    expire_in: 2 days
-    reports:
-      junit: XUNIT_RESULT.xml
-
+  variables:
+    PYENV_VERSION: "3.9"
+    # CCACHE_DIR: "/cache/idf_ccache". On macOS, you cannot write to this folder due to insufficient permissions.
+    CCACHE_DIR: "" # ccache will use "$HOME/Library/Caches/ccache".
+    CCACHE_MAXSIZE: "5G" # To preserve the limited Macbook storage. CCACHE automatically prunes old caches to fit the set limit.
 build_docker:
   extends:
     - .before_script:minimal
@@ -580,6 +268,57 @@ build_template_app:
     - .build_template_app_template
     - .rules:build
   stage: host_test
+  dependencies: # set dependencies to null to avoid missing artifacts issue
   needs:
     - job: fast_template_app
       artifacts: false
+
+####################
+# Dynamic Pipeline #
+####################
+generate_build_child_pipeline:
+  extends:
+    - .build_template
+  tags: [fast_run, shiny]
+  dependencies: # set dependencies to null to avoid missing artifacts issue
+  needs:
+    - pipeline_variables
+    - job: baseline_manifest_sha
+      optional: true
+  artifacts:
+    paths:
+      - build_child_pipeline.yml
+      - test_related_apps.txt
+      - non_test_related_apps.txt
+    expire_in: 1 week
+    when: always
+  variables:
+    PYTEST_IGNORE_COLLECT_IMPORT_ERROR: "1"
+  script:
+    # requires basic pytest dependencies
+    - run_cmd bash install.sh --enable-pytest
+    - run_cmd python tools/ci/dynamic_pipelines/scripts/generate_build_child_pipeline.py
+
+build_child_pipeline:
+  stage: build
+  needs:
+    - job: fast_template_app
+      optional: true
+      artifacts: false
+    - pipeline_variables
+    - generate_build_child_pipeline
+  variables:
+    IS_MR_PIPELINE: $IS_MR_PIPELINE
+    MR_MODIFIED_COMPONENTS: $MR_MODIFIED_COMPONENTS
+    MR_MODIFIED_FILES: $MR_MODIFIED_FILES
+    PARENT_PIPELINE_ID: $CI_PIPELINE_ID
+    BUILD_AND_TEST_ALL_APPS: $BUILD_AND_TEST_ALL_APPS
+    REPORT_EXIT_CODE: $REPORT_EXIT_CODE
+  # https://gitlab.com/gitlab-org/gitlab/-/issues/214340
+  inherit:
+    variables: false
+  trigger:
+    include:
+      - artifact: build_child_pipeline.yml
+        job: generate_build_child_pipeline
+    strategy: depend

.gitlab/ci/common.yml

@@ -6,12 +6,13 @@ stages:
   - pre_check
   - build
   - assign_test
+  - build_doc
   - target_test
   - host_test
-  - build_doc
   - test_deploy
   - deploy
   - post_deploy
+  - retry_failed_jobs
 
 variables:
 # System environment
@@ -20,16 +21,27 @@ variables:
   MAKEFLAGS: "-j5 --no-keep-going"
 
 # GitLab-CI environment
-
-  # XXX_ATTEMPTS variables (https://docs.gitlab.com/ee/ci/runners/configure_runners.html#job-stages-attempts) are not defined here.
-  # Use values from  "CI / CD Settings" - "Variables".
-
-  # GIT_STRATEGY is not defined here.
-  # Use an option from  "CI / CD Settings" - "General pipelines".
-
+  # Thanks to pack-objects cache, clone strategy should behave faster than fetch
+  #   so we pick "clone" as default git strategy
+  # Shiny runners by default remove the CI_PROJECT_DIR every time at the beginning of one job
+  #   and clone with a --depth=1
+  # Brew runners will fetch from locally mirror first, and cache the local CI_PROJECT_DIR
+  # In conclusion
+  # - set GIT_STRATEGY: "clone" to shiny runners
+  # - set GIT_STRATEGY: "fetch" to brew runners
+  GIT_STRATEGY: clone
   # we will download archive for each submodule instead of clone.
   # we don't do "recursive" when fetch submodule as they're not used in CI now.
   GIT_SUBMODULE_STRATEGY: none
+  # since we're using merged-result pipelines, the last commit should work for most cases
+  GIT_DEPTH: 1
+  # --no-recurse-submodules: we use cache for submodules
+  # --prune --prune-tags: in case remote branch or tag is force pushed
+  GIT_FETCH_EXTRA_FLAGS: "--no-recurse-submodules --prune --prune-tags"
+  # we're using .cache folder for caches
+  GIT_CLEAN_FLAGS: -ffdx -e .cache/
+  LATEST_GIT_TAG: v5.5-dev
+
   SUBMODULE_FETCH_TOOL: "tools/ci/ci_fetch_submodule.py"
   # by default we will fetch all submodules
   # jobs can overwrite this variable to only fetch submodules they required
@@ -39,23 +51,15 @@ variables:
   IDF_SKIP_CHECK_SUBMODULES: 1
 
   IDF_PATH: "$CI_PROJECT_DIR"
-  BATCH_BUILD: "1"
   V: "0"
   CHECKOUT_REF_SCRIPT: "$CI_PROJECT_DIR/tools/ci/checkout_project_ref.py"
-  PYTHON_VER: 3.8.17
 
   # Docker images
-  ESP_ENV_IMAGE: "$CI_DOCKER_REGISTRY/esp-env-v5.3:1"
-  ESP_IDF_DOC_ENV_IMAGE: "$CI_DOCKER_REGISTRY/esp-idf-doc-env-v5.3:1-1"
-  QEMU_IMAGE: "${CI_DOCKER_REGISTRY}/qemu-v5.3:1-20230522"
-  TARGET_TEST_ENV_IMAGE: "$CI_DOCKER_REGISTRY/target-test-env-v5.3:1"
-
+  ESP_ENV_IMAGE: "${CI_DOCKER_REGISTRY}/esp-env-v6.0:1"
+  ESP_IDF_DOC_ENV_IMAGE: "${CI_DOCKER_REGISTRY}/esp-idf-doc-env-v6.0:1-1"
+  TARGET_TEST_ENV_IMAGE: "${CI_DOCKER_REGISTRY}/target-test-env-v6.0:1"
   SONARQUBE_SCANNER_IMAGE: "${CI_DOCKER_REGISTRY}/sonarqube-scanner:5"
-
-  PRE_COMMIT_IMAGE: "$CI_DOCKER_REGISTRY/esp-idf-pre-commit:1"
-
-  # target test repo parameters
-  TEST_ENV_CONFIG_REPO: "https://gitlab-ci-token:${BOT_TOKEN}@${CI_SERVER_HOST}:${CI_SERVER_PORT}/qa/ci-test-runner-configs.git"
+  PRE_COMMIT_IMAGE: "${CI_DOCKER_REGISTRY}/esp-idf-pre-commit:1"
 
   # cache python dependencies
   PIP_CACHE_DIR: "$CI_PROJECT_DIR/.cache/pip"
@@ -66,7 +70,7 @@ variables:
   CI_PYTHON_CONSTRAINT_BRANCH: ""
 
   # Update the filename for a specific ESP-IDF release. It is used only with CI_PYTHON_CONSTRAINT_BRANCH.
-  CI_PYTHON_CONSTRAINT_FILE: "espidf.constraints.v5.2.txt"
+  CI_PYTHON_CONSTRAINT_FILE: "espidf.constraints.v6.0.txt"
 
   # Set this variable to repository name of a Python tool you wish to install and test in the context of ESP-IDF CI.
   # Keep the variable empty when not used.
@@ -77,13 +81,33 @@ variables:
   # This is used only if CI_PYTHON_TOOL_REPO is not empty.
   CI_PYTHON_TOOL_BRANCH: ""
 
+  # Set this variable to Clang toolchain distro URL to be used.
+  # NOTE: We have separate toolchains for Xtensa and RISCV, therefore jobs for one arch will fail.
+  # This is OK as far as we use CI_CLANG_DISTRO_URL for pre-release tests purposes only.
+  # Keep the variable empty when not used.
+  CI_CLANG_DISTRO_URL: ""
+
+  # Set this variable to specify the file name for the known failure cases.
+  KNOWN_FAILURE_CASES_FILE_NAME: "master.txt"
+
   IDF_CI_BUILD: 1
 
+  # ccache settings
+  # some settings need to set in .gitlab-ci.yml as it takes effect while start-up the job
+  # https://ccache.dev/manual/latest.html#_configuring_ccache
+
+  # host mapping volume to share ccache between runner concurrent jobs
+  CCACHE_DIR: "/cache/idf_ccache"
+  CCACHE_MAXSIZE: "50G"
+
+  FF_USE_NEW_BASH_EVAL_STRATEGY: "true"
+
 ################################################
 # `before_script` and `after_script` Templates #
 ################################################
 .common_before_scripts: &common-before_scripts |
   source tools/ci/utils.sh
+
   is_based_on_commits $REQUIRED_ANCESTOR_COMMITS
 
   if [[ -n "$IDF_DONT_USE_MIRRORS" ]]; then
@@ -117,31 +141,48 @@ variables:
     export IDF_MIRROR_PREFIX_MAP=
   fi
 
-  # install latest python packages
-  # target test jobs
-  if [[ "${CI_JOB_STAGE}" == "target_test" ]]; then
-    run_cmd bash install.sh --enable-ci --enable-pytest
-  elif [[ "${CI_JOB_STAGE}" == "build_doc" ]]; then
-    run_cmd bash install.sh --enable-ci --enable-docs
-  elif [[ "${CI_JOB_STAGE}" == "build" ]]; then
-    run_cmd bash install.sh --enable-ci --enable-pytest
-  else
-    if ! echo "${CI_JOB_NAME}" | egrep ".*pytest.*"; then
+  if [[ "${CI_JOB_STAGE}" != "target_test" ]]; then
+    section_start "running_install_sh" "Running install.sh"
+    if [[ "${CI_JOB_STAGE}" == "build_doc" ]]; then
+      run_cmd bash install.sh --enable-ci --enable-docs
+    elif [[ "${CI_JOB_STAGE}" == "build" ]]; then
       run_cmd bash install.sh --enable-ci
     else
-      run_cmd bash install.sh --enable-ci --enable-pytest
+      if ! echo "${CI_JOB_NAME}" | egrep ".*pytest.*"; then
+        run_cmd bash install.sh --enable-ci
+      else
+        run_cmd bash install.sh --enable-ci --enable-pytest --enable-test-specific
+      fi
     fi
+    section_end "running_install_sh"
+  else
+    section_start "install_python_env" "Install Python environment"
+    run_cmd python tools/idf_tools.py install-python-env --features ci,pytest,test-specific
+    section_end "install_python_env"
   fi
 
-  # Install esp-clang if necessary
-  if [[ "$IDF_TOOLCHAIN" == "clang" ]]; then
+  if [[ ! -z "$INSTALL_EXTRA_TOOLS" ]]; then
+    section_start "installing_optional_tools" "Install optional tools ${INSTALL_EXTRA_TOOLS}"
+    $IDF_PATH/tools/idf_tools.py --non-interactive install $INSTALL_EXTRA_TOOLS
+    section_end "installing_optional_tools"
+  fi
+
+  # Install esp-clang if necessary (esp-clang is separately installed)
+  if [[ "$IDF_TOOLCHAIN" == "clang" && -z "$CI_CLANG_DISTRO_URL" ]]; then
     $IDF_PATH/tools/idf_tools.py --non-interactive install esp-clang
   fi
 
+  if [[ "${CI_JOB_STAGE}" == "target_test" ]]; then
+    section_start "IDF_SKIP_TOOLS_CHECK" "Skip required tools check"
+    export IDF_SKIP_TOOLS_CHECK=1
+    section_end "IDF_SKIP_TOOLS_CHECK"
+  fi
+  section_start "source_export" "Source export.sh"
   source ./export.sh
+  section_end "source_export"
 
-  # Custom clang
-  if [[ ! -z "$CI_CLANG_DISTRO_URL" ]]; then
+  # Custom clang toolchain
+  if [[ "$IDF_TOOLCHAIN" == "clang" && ! -z "$CI_CLANG_DISTRO_URL" ]]; then
     echo "Using custom clang from ${CI_CLANG_DISTRO_URL}"
     wget $CI_CLANG_DISTRO_URL
     ARCH_NAME=$(basename $CI_CLANG_DISTRO_URL)
@@ -165,9 +206,16 @@ variables:
     rm -rf ${CI_PYTHON_TOOL_REPO}
   fi
 
+  info "setup tools and python venv done"
+
 .show_ccache_statistics: &show_ccache_statistics |
   # Show ccache statistics if enabled globally
-  test "$CI_CCACHE_STATS" == 1 && test -n "$(which ccache)" && ccache --show-stats || true
+  test "$CI_CCACHE_STATS" == 1 && test -n "$(which ccache)" && ccache --show-stats -vv || true
+
+.upload_failed_job_log_artifacts: &upload_failed_job_log_artifacts |
+  if [ $CI_JOB_STATUS = "failed" ]; then
+    python tools/ci/artifacts_handler.py upload --type logs
+  fi
 
 .before_script:minimal:
   before_script:
@@ -175,13 +223,29 @@ variables:
 
 .before_script:build:macos:
   before_script:
+    # macos is running shell executor, which means it would use
+    # the system installed /usr/local/bin/python3 by default.
+    # Ensure pyenv and PYENV_VERSION installed
+    - eval "$(pyenv init -)"
     - *common-before_scripts
     # On macOS, these tools need to be installed
     - export IDF_TOOLS_PATH="${HOME}/.espressif_runner_${CI_RUNNER_ID}_${CI_CONCURRENT_ID}"
-    - $IDF_PATH/tools/idf_tools.py --non-interactive install cmake ninja
+    # remove idf-env.json, since it may contains enabled "features"
+    - rm -f $IDF_TOOLS_PATH/idf-env.json
     # This adds tools (compilers) and the version-specific Python environment to PATH
     - *setup_tools_and_idf_python_venv
     - fetch_submodules
+  variables:
+    INSTALL_EXTRA_TOOLS: cmake ninja
+
+.after_script:build:macos:upload-failed-job-logs:ccache-show-stats:
+  after_script:
+    # macos is running shell executor, which means it would use
+    # the system installed /usr/local/bin/python3 by default.
+    # Ensure pyenv and PYENV_VERSION installed
+    - eval "$(pyenv init -)"
+    - *upload_failed_job_log_artifacts
+    - *show_ccache_statistics
 
 .before_script:build:
   before_script:
@@ -192,10 +256,116 @@ variables:
     - export EXTRA_CFLAGS=${PEDANTIC_CFLAGS}
     - export EXTRA_CXXFLAGS=${PEDANTIC_CXXFLAGS}
 
-.after_script:build:ccache:
+.after_script:build:ccache-show-stats:
   after_script:
     - *show_ccache_statistics
 
+.after_script:build:ccache-show-stats:upload-failed-job-logs:
+  after_script:
+    - *show_ccache_statistics
+    - *upload_failed_job_log_artifacts
+
+##############################
+# Git Strategy Job Templates #
+##############################
+.git_init: &git_init |
+  mkdir -p "${CI_PROJECT_DIR}"
+  cd "${CI_PROJECT_DIR}"
+  git init
+
+.git_fetch_from_mirror_url_if_exists: &git_fetch_from_mirror_url_if_exists |
+  # check if set mirror
+  if [ -n "${LOCAL_GITLAB_HTTPS_HOST:-}" ] && [ -n "${ESPCI_TOKEN:-}" ]; then
+    MIRROR_REPO_URL="https://bot:${ESPCI_TOKEN}@${LOCAL_GITLAB_HTTPS_HOST}/${CI_PROJECT_PATH}"
+  elif [ -n "${LOCAL_GIT_MIRROR:-}" ]; then
+    MIRROR_REPO_URL="${LOCAL_GIT_MIRROR}/${CI_PROJECT_PATH}"
+  fi
+
+  # fetch from mirror first if set
+  if [ -n "${MIRROR_REPO_URL:-}" ]; then
+    if git remote -v | grep origin; then
+      git remote set-url origin "${MIRROR_REPO_URL}"
+    else
+      git remote add origin "${MIRROR_REPO_URL}"
+    fi
+    # mirror url may fail with authentication issue
+    git fetch origin --no-recurse-submodules || true
+  fi
+
+  # set remote url to CI_REPOSITORY_URL
+  if git remote -v | grep origin; then
+    git remote set-url origin "${CI_REPOSITORY_URL}"
+  else
+    git remote add origin "${CI_REPOSITORY_URL}"
+  fi
+
+.git_checkout_ci_commit_sha: &git_checkout_ci_commit_sha |
+  git checkout $CI_COMMIT_SHA
+  git clean ${GIT_CLEAN_FLAGS}
+
+# git diff requires two commits, with different CI env var
+#
+# By default, we use git strategy "clone" with depth 1 to speed up the clone process.
+# But for jobs requires running `git diff`, we need to fetch more commits to get the correct diffs.
+#
+# Since there's no way to get the correct git_depth before the job starts,
+# we can't set `GIT_DEPTH` in the job definition.
+#
+# Set git strategy to "none" and fetch manually instead.
+.before_script:fetch:git_diff:
+  variables:
+    GIT_STRATEGY: none
+  before_script:
+    - *git_init
+    - *git_fetch_from_mirror_url_if_exists
+    - |
+      # Store the diff output in a temporary file
+      TEMP_FILE=$(mktemp)
+      # merged results pipelines, by default
+      if [[ -n $CI_MERGE_REQUEST_SOURCE_BRANCH_SHA ]]; then
+        git fetch origin $CI_MERGE_REQUEST_DIFF_BASE_SHA --depth=1 ${GIT_FETCH_EXTRA_FLAGS}
+        git fetch origin $CI_MERGE_REQUEST_SOURCE_BRANCH_SHA --depth=1 ${GIT_FETCH_EXTRA_FLAGS}
+        git diff --name-only $CI_MERGE_REQUEST_DIFF_BASE_SHA $CI_MERGE_REQUEST_SOURCE_BRANCH_SHA > "$TEMP_FILE"
+        GIT_DIFF_OUTPUT=$(cat "$TEMP_FILE")
+        git fetch origin $CI_COMMIT_SHA --depth=1 ${GIT_FETCH_EXTRA_FLAGS}
+      # merge request pipelines, when the mr got conflicts
+      elif [[ -n $CI_MERGE_REQUEST_DIFF_BASE_SHA ]]; then
+        git fetch origin $CI_MERGE_REQUEST_DIFF_BASE_SHA --depth=1 ${GIT_FETCH_EXTRA_FLAGS}
+        git fetch origin $CI_COMMIT_SHA --depth=1 ${GIT_FETCH_EXTRA_FLAGS}
+        git diff --name-only $CI_MERGE_REQUEST_DIFF_BASE_SHA $CI_COMMIT_SHA > "$TEMP_FILE"
+        GIT_DIFF_OUTPUT=$(cat "$TEMP_FILE")
+      # other pipelines, like the protected branches pipelines
+      elif [[ "$CI_COMMIT_BEFORE_SHA" != "0000000000000000000000000000000000000000" ]]; then
+        git fetch origin $CI_COMMIT_BEFORE_SHA --depth=1 ${GIT_FETCH_EXTRA_FLAGS}
+        git fetch origin $CI_COMMIT_SHA --depth=1 ${GIT_FETCH_EXTRA_FLAGS}
+        git diff --name-only $CI_COMMIT_BEFORE_SHA $CI_COMMIT_SHA > "$TEMP_FILE"
+        GIT_DIFF_OUTPUT=$(cat "$TEMP_FILE")
+      else
+        # pipeline source could be web, scheduler, etc.
+        git fetch origin $CI_COMMIT_SHA --depth=2 ${GIT_FETCH_EXTRA_FLAGS}
+        git diff --name-only $CI_COMMIT_SHA~1 $CI_COMMIT_SHA > "$TEMP_FILE"
+        GIT_DIFF_OUTPUT=$(cat "$TEMP_FILE")
+      fi
+    - *git_checkout_ci_commit_sha
+    - *common-before_scripts
+    - *setup_tools_and_idf_python_venv
+    - add_gitlab_ssh_keys
+
+# target test runners may locate in different places
+# for runners set git mirror, we fetch from the mirror first, then fetch the HEAD commit
+.before_script:fetch:target_test:
+  variables:
+    GIT_STRATEGY: none
+  before_script:
+    - *git_init
+    - *git_fetch_from_mirror_url_if_exists
+    - git fetch origin "${CI_COMMIT_SHA}" --depth=1 ${GIT_FETCH_EXTRA_FLAGS}
+    - *git_checkout_ci_commit_sha
+    - *common-before_scripts
+    - *setup_tools_and_idf_python_venv
+    - add_gitlab_ssh_keys
+    # no submodules
+
 #############
 # `default` #
 #############
@@ -203,11 +373,15 @@ default:
   cache:
     # pull only for most of the use cases since it's cache dir.
     # Only set "push" policy for "upload_cache" stage jobs
-    - key: pip-cache
+    - key: pip-cache-${LATEST_GIT_TAG}
+      fallback_keys:
+        - pip-cache
       paths:
         - .cache/pip
       policy: pull
-    - key: submodule-cache
+    - key: submodule-cache-${LATEST_GIT_TAG}
+      fallback_keys:
+        - submodule-cache
       paths:
         - .cache/submodule_archives
       policy: pull
@@ -216,6 +390,12 @@ default:
     - *setup_tools_and_idf_python_venv
     - add_gitlab_ssh_keys
     - fetch_submodules
+# gitlab bug, setting them here doesn't work
+# - expire_in: https://gitlab.com/gitlab-org/gitlab/-/issues/404563
+# - when: https://gitlab.com/gitlab-org/gitlab/-/issues/440672
+#  artifacts:
+#    expire_in: 1 week
+#    when: always
   retry:
     max: 2
     when:

.gitlab/ci/danger.yml

@@ -0,0 +1,17 @@
+# External DangerJS
+include:
+  - project: espressif/shared-ci-dangerjs
+    ref: master
+    file: danger.yaml
+
+run-danger-mr-linter:
+  stage: pre_check
+  variables:
+    GIT_STRATEGY: none # no repo checkout
+    ENABLE_CHECK_AREA_LABELS: 'true'
+    ENABLE_CHECK_DOCS_TRANSLATION: 'true'
+    ENABLE_CHECK_UPDATED_CHANGELOG: 'false'
+  before_script: []
+  cache: []
+  tags:
+    - dangerjs

.gitlab/ci/default-build-test-rules.yml

@@ -7,10 +7,16 @@
 #
 # This file should ONLY be used during bringup. Should be reset to empty after the bringup process
 extra_default_build_targets:
- - esp32p4
+  - esp32c5
+  - esp32c61
+  - esp32h21
+  - esp32h4
 
 bypass_check_test_targets:
- - esp32p4
+  - esp32h21
+  - esp32h4
+  - esp32c5
+
 #
 # These lines would
 # - enable the README.md check for esp32c6. Don't forget to add the build jobs in .gitlab/ci/build.yml

.gitlab/ci/dependencies/dependencies.yml

@@ -5,6 +5,7 @@
   - esp32c3
   - esp32c2
   - esp32c6
+  - esp32c5
   - esp32h2
   - esp32p4
 
@@ -65,104 +66,6 @@
   included_in:
     - build:check
 
-# ---------------
-# Build Test Jobs
-# ---------------
-"build:{0}-{1}":
-  matrix:
-    - *target_test
-    - *all_targets
-  labels:
-    - build
-  patterns:
-    - build_components
-    - build_system
-    - build_target_test
-    - downloadable-tools
-  included_in:
-    - "build:{0}"
-    - build:target_test
-
-####################
-# Target Test Jobs #
-####################
-"test:{0}-{1}":
-  matrix:
-    - *target_test
-    - *all_targets
-  labels: # For each rule, use labels <test_type> and <test_type>-<target>
-    - "{0}"
-    - "{0}_{1}"
-    - target_test
-  patterns: # For each rule, use patterns <test_type> and build-<test_type>
-    - "{0}"
-    - "build-{0}"
-  included_in: # Parent rules
-    - "build:{0}"
-    - "build:{0}-{1}"
-    - build:target_test
-
-# -------------
-# Special Cases
-# -------------
-
-# To reduce the specific runners' usage.
-# Do not create these jobs by default patterns on development branches
-# Can be triggered by labels or related changes
-"test:{0}-{1}-{2}":
-  matrix:
-    - *target_test
-    - *all_targets
-    - - wifi      # pytest*wifi*
-      - ethernet  # pytest*ethernet*
-      - sdio      # pytest*sdio*
-      - usb       # USB Device & Host tests
-      - adc       # pytest*adc*
-      - i154
-      - flash_multi
-      - ecdsa
-      - nvs_encr_hmac
-  patterns:
-    - "{0}-{1}-{2}"
-    - "{0}-{2}"
-    - "target_test-{2}"
-  labels:
-    - "{0}_{1}"
-    - "{0}"
-    - target_test
-  included_in:
-    - "build:{0}-{1}"
-    - "build:{0}"
-    - build:target_test
-
-# For example_test*flash_encryption_wifi_high_traffic jobs
-# set `INCLUDE_NIGHTLY_RUN` variable when triggered on development branches
-"test:example_test-{0}-include_nightly_run-rule":
-  matrix:
-    - - esp32
-      - esp32c3
-  specific_rules:
-    - "if-example_test-ota-include_nightly_run-rule"
-  included_in:
-    - "build:example_test-{0}"
-    - "build:example_test"
-    - build:target_test
-
-# For i154 runners
-"test:example_test-i154":
-  patterns:
-    - "example_test-i154"
-    - "target_test-i154"
-  labels:
-    - target_test
-    - example_test
-  included_in:
-    - "build:example_test-esp32s3"
-    - "build:example_test-esp32c6"
-    - "build:example_test-esp32h2"
-    - "build:example_test"
-    - build:target_test
-
 "test:host_test":
   labels:
     - host_test
@@ -181,3 +84,11 @@
 "labels:nvs_coverage": # host_test
   labels:
     - nvs_coverage
+
+"labels:windows_pytest_build_system":
+  labels:
+    - windows
+  specific_rules:
+    - if-schedule-test-build-system-windows
+  patterns:
+    - build_system

.gitlab/ci/deploy.yml

@@ -1,8 +1,7 @@
 .deploy_job_template:
   stage: deploy
   image: $ESP_ENV_IMAGE
-  tags:
-    - deploy
+  tags: [ deploy ]
 
 # Check this before push_to_github
 check_submodule_sync:
@@ -10,11 +9,11 @@ check_submodule_sync:
     - .deploy_job_template
     - .rules:test:submodule
   stage: test_deploy
-  tags:
-    - github_sync
+  tags: [ brew, github_sync ]
   retry: 2
   variables:
-    GIT_STRATEGY: clone
+    # for brew runners, we always set GIT_STRATEGY to fetch
+    GIT_STRATEGY: fetch
     SUBMODULES_TO_FETCH: "none"
     PUBLIC_IDF_URL: "https://github.com/espressif/esp-idf.git"
   dependencies: []
@@ -35,6 +34,12 @@ push_to_github:
     - .rules:push_to_github
   needs:
     - check_submodule_sync
+  tags: [ brew, github_sync ]
+  variables:
+    # for brew runners, we always set GIT_STRATEGY to fetch
+    GIT_STRATEGY: fetch
+    # github also need full record of commits
+    GIT_DEPTH: 0
   script:
     - add_github_ssh_keys
     - git remote remove github &>/dev/null || true
@@ -47,6 +52,9 @@ deploy_update_SHA_in_esp-dockerfiles:
     - .before_script:minimal
     - .rules:protected-no_label-always
   dependencies: []
+  variables:
+    GIT_DEPTH: 2
+  tags: [ shiny, build ]
   script:
     - 'curl --header "PRIVATE-TOKEN: ${ESPCI_SCRIPTS_TOKEN}" -o create_MR_in_esp_dockerfile.sh $GITLAB_HTTP_SERVER/api/v4/projects/1260/repository/files/create_MR_in_esp_dockerfile%2Fcreate_MR_in_esp_dockerfile.sh/raw\?ref\=master'
     - chmod +x create_MR_in_esp_dockerfile.sh

.gitlab/ci/docs.yml

@@ -37,25 +37,16 @@
 .if-dev-push: &if-dev-push
   if: '$CI_COMMIT_REF_NAME != "master" && $CI_COMMIT_BRANCH !~ /^release\/v/ && $CI_COMMIT_TAG !~ /^v\d+\.\d+(\.\d+)?($|-)/ && $CI_COMMIT_TAG !~ /^qa-test/ && ($CI_PIPELINE_SOURCE == "push" || $CI_PIPELINE_SOURCE == "merge_request_event")'
 
-.if-schedule: &if-schedule
-  if: '$CI_PIPELINE_SOURCE == "schedule"'
-
 .doc-rules:build:docs-full:
   rules:
     - <<: *if-qa-test-tag
       when: never
-    - <<: *if-schedule
+    - <<: *if-protected
     - <<: *if-label-build_docs
     - <<: *if-label-docs_full
     - <<: *if-dev-push
       changes: *patterns-docs-full
 
-.doc-rules:build:docs-full-prod:
-  rules:
-    - <<: *if-qa-test-tag
-      when: never
-    - <<: *if-protected-no_label
-
 .doc-rules:build:docs-partial:
   rules:
     - <<: *if-qa-test-tag
@@ -92,13 +83,20 @@ check_docs_lang_sync:
   stage: build_doc
   tags:
     - build_docs
+  needs:
+    - job: fast_template_app
+      artifacts: false
+      optional: true
   script:
+    - if [ -n "${BREATHE_ALT_INSTALL_URL_PY39}" ]; then
+        pip uninstall -y breathe && pip install -U ${BREATHE_ALT_INSTALL_URL_PY39};
+      fi
     - cd docs
     - build-docs -t $DOCTGT -bs $DOC_BUILDERS -l $DOCLANG build
   parallel:
     matrix:
       - DOCLANG: ["en", "zh_CN"]
-        DOCTGT: ["esp32", "esp32s2", "esp32s3", "esp32c3", "esp32c2", "esp32c6", "esp32h2", "esp32p4"]
+        DOCTGT: ["esp32", "esp32s2", "esp32s3", "esp32c3", "esp32c2", "esp32c6", "esp32c61", "esp32c5","esp32h2", "esp32h21", "esp32p4"]
 
 check_docs_gh_links:
   image: $ESP_IDF_DOC_ENV_IMAGE
@@ -115,23 +113,6 @@ build_docs_html_full:
   extends:
     - .build_docs_template
     - .doc-rules:build:docs-full
-  needs:
-    - job: fast_template_app
-      artifacts: false
-      optional: true
-  artifacts:
-    when: always
-    paths:
-      - docs/_build/*/*/*.txt
-      - docs/_build/*/*/html/*
-    expire_in: 4 days
-  variables:
-    DOC_BUILDERS: "html"
-
-build_docs_html_full_prod:
-  extends:
-    - .build_docs_template
-    - .doc-rules:build:docs-full-prod
   artifacts:
     when: always
     paths:
@@ -145,10 +126,6 @@ build_docs_html_partial:
   extends:
     - .build_docs_template
     - .doc-rules:build:docs-partial
-  needs:
-    - job: fast_template_app
-      artifacts: false
-      optional: true
   artifacts:
     when: always
     paths:
@@ -164,44 +141,21 @@ build_docs_html_partial:
       - DOCLANG: "zh_CN"
         DOCTGT: "esp32p4"
 
-build_docs_pdf:
-  extends:
-    - .build_docs_template
-    - .doc-rules:build:docs-full
-  needs:
-    - job: fast_template_app
-      artifacts: false
-      optional: true
-  artifacts:
-    when: always
-    paths:
-      - docs/_build/*/*/latex/*
-    expire_in: 4 days
-  variables:
-    DOC_BUILDERS: "latex"
-
-build_docs_pdf_prod:
-  extends:
-    - .build_docs_template
-    - .doc-rules:build:docs-full-prod
-  artifacts:
-    when: always
-    paths:
-      - docs/_build/*/*/latex/*
-    expire_in: 4 days
-  variables:
-    DOC_BUILDERS: "latex"
-
 .deploy_docs_template:
   image: $ESP_IDF_DOC_ENV_IMAGE
   variables:
     DOCS_BUILD_DIR: "${IDF_PATH}/docs/_build/"
     PYTHONUNBUFFERED: 1
+    # ensure all tags are fetched, need to know the latest/stable tag for the docs
+    GIT_STRATEGY: clone
+    GIT_DEPTH: 0
   stage: test_deploy
   tags:
     - deploy
     - shiny
   script:
+    # ensure all tags are fetched, need to know the latest/stable tag for the docs
+    - git fetch --tags --prune
     - add_doc_server_ssh_keys $DOCS_DEPLOY_PRIVATEKEY $DOCS_DEPLOY_SERVER $DOCS_DEPLOY_SERVER_USER
     - export GIT_VER=$(git describe --always ${PIPELINE_COMMIT_SHA} --)
     - deploy-docs
@@ -220,8 +174,6 @@ deploy_docs_preview:
       optional: true
     - job: build_docs_html_full
       optional: true
-    - job: build_docs_pdf
-      optional: true
   variables:
     TYPE: "preview"
     # older branches use DOCS_DEPLOY_KEY, DOCS_SERVER, DOCS_SERVER_USER, DOCS_PATH for preview server so we keep these names for 'preview'
@@ -236,12 +188,12 @@ deploy_docs_production:
   # The DOCS_PROD_* variables used by this job are "Protected" so these branches must all be marked "Protected" in Gitlab settings
   extends:
     - .deploy_docs_template
-    - .doc-rules:build:docs-full-prod
+  rules:
+    - <<: *if-protected-no_label
   stage: post_deploy
   dependencies:  # set dependencies to null to avoid missing artifacts issue
   needs: # ensure runs after push_to_github succeeded
-    - build_docs_html_full_prod
-    - build_docs_pdf_prod
+    - build_docs_html_full
     - job: push_to_github
       artifacts: false
   variables:
@@ -256,7 +208,8 @@ deploy_docs_production:
 check_doc_links:
   extends:
     - .build_docs_template
-    - .doc-rules:build:docs-full-prod
+  rules:
+    - <<: *if-protected-no_label
   stage: post_deploy
   needs:
     - job: deploy_docs_production

.gitlab/ci/host-test.yml

@@ -13,14 +13,28 @@
     - job: upload-submodules-cache
       optional: true
       artifacts: false
-    - job: mr_variables
-      optional: true  # only MR pipelines would have this
+    - pipeline_variables
+  artifacts:
+    expire_in: 1 week
+    when: always
 
-test_nvs_on_host:
-  extends: .host_test_template
+check_public_headers:
+  extends:
+    - .host_test_template
+    - .rules:build:check
   script:
-    - cd components/nvs_flash/test_nvs_host
-    - make test
+    - IDF_TARGET=esp32 python tools/ci/check_public_headers.py --jobs 4 --prefix xtensa-esp32-elf-
+    - IDF_TARGET=esp32s2 python tools/ci/check_public_headers.py --jobs 4 --prefix xtensa-esp32s2-elf-
+    - IDF_TARGET=esp32s3 python tools/ci/check_public_headers.py --jobs 4 --prefix xtensa-esp32s3-elf-
+    - IDF_TARGET=esp32c3 python tools/ci/check_public_headers.py --jobs 4 --prefix riscv32-esp-elf-
+    - IDF_TARGET=esp32c2 python tools/ci/check_public_headers.py --jobs 4 --prefix riscv32-esp-elf-
+    - IDF_TARGET=esp32c6 python tools/ci/check_public_headers.py --jobs 4 --prefix riscv32-esp-elf-
+    - IDF_TARGET=esp32c5 python tools/ci/check_public_headers.py --jobs 4 --prefix riscv32-esp-elf-
+    - IDF_TARGET=esp32h2 python tools/ci/check_public_headers.py --jobs 4 --prefix riscv32-esp-elf-
+    - IDF_TARGET=esp32p4 python tools/ci/check_public_headers.py --jobs 4 --prefix riscv32-esp-elf-
+    - IDF_TARGET=esp32c61 python tools/ci/check_public_headers.py --jobs 4 --prefix riscv32-esp-elf-
+    - IDF_TARGET=esp32h21 python tools/ci/check_public_headers.py --jobs 4 --prefix riscv32-esp-elf-
+    - IDF_TARGET=esp32h4 python tools/ci/check_public_headers.py --jobs 4 --prefix riscv32-esp-elf-
 
 test_nvs_coverage:
   extends:
@@ -28,11 +42,10 @@ test_nvs_coverage:
     - .rules:labels:nvs_coverage
   artifacts:
     paths:
-      - components/nvs_flash/test_nvs_host/coverage_report
-    expire_in: 1 week
+      - components/nvs_flash/host_test/nvs_host_test/coverage_report
   script:
-    - cd components/nvs_flash/test_nvs_host
-    - make coverage_report
+    - cd components/nvs_flash/host_test/nvs_host_test
+    - idf.py build coverage
   # the 'long' host tests take approx 11 hours on our current runners. Adding some margin here for possible CPU contention
   timeout: 18 hours
 
@@ -51,23 +64,6 @@ test_ldgen_on_host:
   variables:
     LC_ALL: C.UTF-8
 
-test_reproducible_build:
-  extends: .host_test_template
-  script:
-    - ./tools/ci/test_reproducible_build.sh
-  artifacts:
-    when: on_failure
-    paths:
-      - "**/sdkconfig"
-      - "**/build*/*.bin"
-      - "**/build*/*.elf"
-      - "**/build*/*.map"
-      - "**/build*/flasher_args.json"
-      - "**/build*/*.bin"
-      - "**/build*/bootloader/*.bin"
-      - "**/build*/partition_table/*.bin"
-    expire_in: 1 week
-
 test_spiffs_on_host:
   extends: .host_test_template
   script:
@@ -100,18 +96,9 @@ test_gdbstub_on_host:
     - cd components/esp_gdbstub/test_gdbstub_host
     - make test
 
-test_idf_py:
-  extends: .host_test_template
-  variables:
-    LC_ALL: C.UTF-8
-  script:
-    - cd ${IDF_PATH}/tools/test_idf_py
-    - ./test_idf_py.py
-    - ./test_hints.py
-
 # Test for create virtualenv. It must be invoked from Python, not from virtualenv.
 # Use docker image system python without any extra dependencies
-test_idf_tools:
+test_cli_installer:
   extends:
     - .host_test_template
     - .before_script:minimal
@@ -120,17 +107,19 @@ test_idf_tools:
     paths:
       - tools/tools.new.json
       - tools/test_idf_tools/test_python_env_logs.txt
-    expire_in: 1 week
   image:
     name: $ESP_ENV_IMAGE
     entrypoint: [""]  # use system python3. no extra pip package installed
   script:
     # Tools must be downloaded for testing
-    - python3 ${IDF_PATH}/tools/idf_tools.py download required qemu-riscv32 qemu-xtensa
+    # We could use "idf_tools.py download all", but we don't want to install clang because of its huge size
+    - python3 ${IDF_PATH}/tools/idf_tools.py download required qemu-riscv32 qemu-xtensa cmake
     - cd ${IDF_PATH}/tools/test_idf_tools
     - python3 -m pip install jsonschema
     - python3 ./test_idf_tools.py -v
     - python3 ./test_idf_tools_python_env.py
+    # It runs at the end because it modifies dependencies
+    - IDF_TEST_MAY_BREAK_DEPENDENCIES=1 python3 ./test_idf_tools.py -v TestSystemDependencies.test_commands_when_nodeps
 
 .test_efuse_table_on_host_template:
   extends: .host_test_template
@@ -140,7 +129,6 @@ test_idf_tools:
     when: on_failure
     paths:
       - components/efuse/${IDF_TARGET}/esp_efuse_table.c
-    expire_in: 1 week
   script:
     - cd ${IDF_PATH}/components/efuse/
     - ./efuse_table_gen.py -t "${IDF_TARGET}" ${IDF_PATH}/components/efuse/${IDF_TARGET}/esp_efuse_table.csv
@@ -183,7 +171,6 @@ test_logtrace_proc:
     paths:
       - tools/esp_app_trace/test/logtrace/output
       - tools/esp_app_trace/test/logtrace/.coverage
-    expire_in: 1 week
   script:
     - cd ${IDF_PATH}/tools/esp_app_trace/test/logtrace
     - ./test.sh
@@ -195,50 +182,47 @@ test_sysviewtrace_proc:
     paths:
       - tools/esp_app_trace/test/sysview/output
       - tools/esp_app_trace/test/sysview/.coverage
-    expire_in: 1 week
   script:
     - cd ${IDF_PATH}/tools/esp_app_trace/test/sysview
     - ./test.sh
 
-test_mkdfu:
-  extends: .host_test_template
-  variables:
-    LC_ALL: C.UTF-8
-  script:
-    - cd ${IDF_PATH}/tools/test_mkdfu
-    - ./test_mkdfu.py
-
-test_sbom:
-  extends:
-    - .host_test_template
-    - .rules:patterns:sbom
-  script:
-    - cd ${IDF_PATH}/tools/test_sbom
-    - pytest
-
-test_autocomplete:
+test_tools:
   extends:
     - .host_test_template
   artifacts:
-    when: on_failure
     paths:
       - ${IDF_PATH}/*.out
-    expire_in: 1 week
-  script:
-    - ${IDF_PATH}/tools/ci/test_autocomplete.py
-
-test_detect_python:
-  extends:
-    - .host_test_template
+      - ${IDF_PATH}/XUNIT_*.xml
+    reports:
+      junit: ${IDF_PATH}/XUNIT_*.xml
+  variables:
+    LC_ALL: C.UTF-8
+    INSTALL_EXTRA_TOOLS: "qemu-xtensa qemu-riscv32"  # for test_idf_qemu.py
   script:
+    - stat=0
+    - cd ${IDF_PATH}/tools/ci/test_autocomplete
+    - pytest --noconftest test_autocomplete.py --junitxml=${IDF_PATH}/XUNIT_AUTOCOMP.xml                  || stat=1
+    - cd ${IDF_PATH}/tools/test_idf_py
+    - pytest --noconftest test_idf_py.py       --junitxml=${IDF_PATH}/XUNIT_IDF_PY.xml                    || stat=1
+    - pytest --noconftest test_hints.py        --junitxml=${IDF_PATH}/XUNIT_HINTS.xml                     || stat=1
+    - pytest --noconftest test_idf_qemu.py     --junitxml=${IDF_PATH}/XUNIT_IDF_PY_QEMU.xml               || stat=1
+    - cd ${IDF_PATH}/tools/test_bsasm
+    - pytest --noconftest test_bsasm.py        --junitxml=${IDF_PATH}/XUNIT_BSASM.xml                     || stat=1
+    - cd ${IDF_PATH}/tools/test_mkdfu
+    - pytest --noconftest test_mkdfu.py        --junitxml=${IDF_PATH}/XUNIT_MKDFU.xml                     || stat=1
+    - cd ${IDF_PATH}/tools/test_idf_size
+    - pytest --noconftest test_idf_size.py     --junitxml=${IDF_PATH}/XUNIT_IDF_SIZE.xml                  || stat=1
+    - cd ${IDF_PATH}/tools/test_idf_diag
+    - pytest --noconftest test_idf_diag.py     --junitxml=${IDF_PATH}/XUNIT_IDF_DIAG.xml                  || stat=1
     - cd ${IDF_PATH}
-    - shellcheck -s sh tools/detect_python.sh
-    - shellcheck -s bash tools/detect_python.sh
-    - shellcheck -s dash tools/detect_python.sh
+    - shellcheck -s sh tools/detect_python.sh                                                             || stat=1
+    - shellcheck -s bash tools/detect_python.sh                                                           || stat=1
+    - shellcheck -s dash tools/detect_python.sh                                                           || stat=1
     - "bash -c '. tools/detect_python.sh && echo Our Python: ${ESP_PYTHON?Python is not set}'"
     - "dash -c '. tools/detect_python.sh && echo Our Python: ${ESP_PYTHON?Python is not set}'"
     - "zsh -c '. tools/detect_python.sh && echo Our Python: ${ESP_PYTHON?Python is not set}'"
     - "fish -c 'source tools/detect_python.fish && echo Our Python: $ESP_PYTHON'"
+    - exit "$stat"
 
 test_split_path_by_spaces:
   extends: .host_test_template
@@ -255,6 +239,7 @@ test_mqtt_on_host:
 
 test_transport_on_host:
   extends: .host_test_template
+  allow_failure: true # IDFCI-2781 [v5.5, v5.4] test_transport_on_host fails on ubuntu 24.04
   script:
     - cd ${IDF_PATH}/components/tcp_transport/host_test
     - idf.py build
@@ -295,60 +280,160 @@ test_pytest_qemu:
   extends:
     - .host_test_template
     - .before_script:build
-  image: $QEMU_IMAGE
   artifacts:
-    when: always
     paths:
       - XUNIT_RESULT.xml
-      - pytest_embedded_log/
+      - pytest-embedded/
+      - "**/build*/*.bin"
     reports:
       junit: XUNIT_RESULT.xml
-    expire_in: 1 week
-  allow_failure: true # IDFCI-1752
   parallel:
     matrix:
-      - IDF_TARGET: [esp32, esp32c3]
+      - IDF_TARGET: "esp32"
+        INSTALL_EXTRA_TOOLS: "qemu-xtensa"
+        # Skip Clang + Xtensa tests due to bootloader size issue
+        IDF_TOOLCHAIN: [gcc]
+      - IDF_TARGET: "esp32c3"
+        INSTALL_EXTRA_TOOLS: "qemu-riscv32"
+        IDF_TOOLCHAIN: [gcc, clang]
   script:
-    - run_cmd python tools/ci/ci_build_apps.py . -vv
+    - run_cmd python tools/ci/ci_build_apps.py . -v
       --target $IDF_TARGET
       --pytest-apps
       -m qemu
       --collect-app-info "list_job_${CI_JOB_NAME_SLUG}.txt"
       --modified-components ${MR_MODIFIED_COMPONENTS}
       --modified-files ${MR_MODIFIED_FILES}
-    - retry_failed git clone $KNOWN_FAILURE_CASES_REPO known_failure_cases
+    - python tools/ci/get_known_failure_cases_file.py
     - run_cmd pytest
       --target $IDF_TARGET
+      --log-cli-level DEBUG
       -m qemu
       --embedded-services idf,qemu
       --junitxml=XUNIT_RESULT.xml
-      --ignore-result-files known_failure_cases/known_failure_cases.txt
+      --ignore-result-files ${KNOWN_FAILURE_CASES_FILE_NAME}
       --app-info-filepattern \"list_job_*.txt\"
+      --qemu-extra-args \"-global driver=timer.$IDF_TARGET.timg,property=wdt_disable,value=true\"
 
 test_pytest_linux:
   extends:
     - .host_test_template
     - .before_script:build
   artifacts:
-    when: always
     paths:
       - XUNIT_RESULT.xml
-      - pytest_embedded_log/
+      - pytest-embedded/
+      - "**/build*/build_log.txt"
     reports:
       junit: XUNIT_RESULT.xml
-    expire_in: 1 week
   script:
-    - run_cmd python tools/ci/ci_build_apps.py components examples tools/test_apps -vv
+    - run_cmd python tools/ci/ci_build_apps.py components examples tools/test_apps -v
       --target linux
       --pytest-apps
       -m host_test
       --collect-app-info "list_job_${CI_JOB_NAME_SLUG}.txt"
       --modified-components ${MR_MODIFIED_COMPONENTS}
       --modified-files ${MR_MODIFIED_FILES}
-    - retry_failed git clone $KNOWN_FAILURE_CASES_REPO known_failure_cases
+    - python tools/ci/get_known_failure_cases_file.py
     - run_cmd pytest
       --target linux
       -m host_test
+      --embedded-services idf
       --junitxml=XUNIT_RESULT.xml
-      --ignore-result-files known_failure_cases/known_failure_cases.txt
+      --ignore-result-files ${KNOWN_FAILURE_CASES_FILE_NAME}
       --app-info-filepattern \"list_job_*.txt\"
+
+test_pytest_macos:
+  extends:
+    - .host_test_template
+    - .before_script:build:macos
+  tags:
+    - macos_shell
+  artifacts:
+    paths:
+      - XUNIT_RESULT.xml
+      - pytest-embedded/
+      - "**/build*/build_log.txt"
+    reports:
+      junit: XUNIT_RESULT.xml
+  variables:
+    PYENV_VERSION: "3.9"
+    PYTEST_IGNORE_COLLECT_IMPORT_ERROR: "1"
+  script:
+    - run_cmd python tools/ci/ci_build_apps.py components examples tools/test_apps -v
+      --target linux
+      --pytest-apps
+      -m \"host_test and macos_shell\"
+      --collect-app-info "list_job_${CI_JOB_NAME_SLUG}.txt"
+      --modified-components ${MR_MODIFIED_COMPONENTS}
+      --modified-files ${MR_MODIFIED_FILES}
+    - python tools/ci/get_known_failure_cases_file.py
+    - run_cmd pytest
+      --target linux
+      -m \"host_test and macos_shell\"
+      --junitxml=XUNIT_RESULT.xml
+      --ignore-result-files ${KNOWN_FAILURE_CASES_FILE_NAME}
+      --app-info-filepattern \"list_job_*.txt\"
+
+test_idf_pytest_plugin:
+  extends:
+    - .host_test_template
+    - .rules:patterns:idf-pytest-plugin
+  variables:
+    SUBMODULES_TO_FETCH: "none"
+  artifacts:
+    reports:
+      junit: XUNIT_RESULT.xml
+  script:
+    - cd ${IDF_PATH}/tools/ci/dynamic_pipelines/tests/test_report_generator
+    - python -m unittest test_report_generator.py
+    - cd ${IDF_PATH}/tools/ci/idf_pytest
+    - pytest --junitxml=${CI_PROJECT_DIR}/XUNIT_RESULT.xml
+
+test_idf_build_apps_load_soc_caps:
+  extends: .host_test_template
+  script:
+    - python tools/ci/check_soc_headers_load_in_idf_build_apps.py
+
+test_nvs_gen_check:
+  extends: .host_test_template
+  artifacts:
+    paths:
+      - XUNIT_RESULT.xml
+      - components/nvs_flash/nvs_partition_tool
+    reports:
+      junit: XUNIT_RESULT.xml
+  variables:
+    LC_ALL: C.UTF-8
+  script:
+    - cd ${IDF_PATH}/components/nvs_flash/nvs_partition_tool
+    - pytest --noconftest test_nvs_gen_check.py --junitxml=XUNIT_RESULT.xml
+
+test_esp_rom:
+  extends: .host_test_template
+  artifacts:
+    paths:
+      - XUNIT_RESULT.xml
+    reports:
+      junit: XUNIT_RESULT.xml
+  script:
+    - cd ${IDF_PATH}/components/esp_rom/
+    - pytest --noconftest test_esp_rom.py --junitxml=XUNIT_RESULT.xml
+
+make_sure_soc_caps_compatible_in_idf_build_apps:
+    extends:
+      - .host_test_template
+      - .rules:dev-push
+    artifacts:
+      paths:
+        - new.json
+        - base.json
+      when: always
+    when: manual
+    script:
+      - python tools/ci/idf_build_apps_dump_soc_caps.py new.json
+      - git fetch --depth=1 origin $CI_MERGE_REQUEST_DIFF_BASE_SHA
+      - git checkout -f $CI_MERGE_REQUEST_DIFF_BASE_SHA
+      - git checkout $CI_COMMIT_SHA -- tools/ci/idf_build_apps_dump_soc_caps.py
+      - python tools/ci/idf_build_apps_dump_soc_caps.py base.json
+      - diff new.json base.json

.gitlab/ci/integration_test.yml

@@ -8,7 +8,7 @@
   - "tools/**/*"
   - ".gitlab-ci.yml"
   - ".gitlab/ci/common.yml"
-  - ".gitlab/ci/integration-test.yml"
+  - ".gitlab/ci/integration_test.yml"
   - ".gitmodules"
   - "CMakeLists.txt"
   - "install.sh"
@@ -22,6 +22,10 @@
     - if: '$CI_PIPELINE_SOURCE != "merge_request_event"'
     - if: '$CI_PIPELINE_SOURCE == "merge_request_event"'
       changes: *patterns-integration_test
+    # support trigger by ci labels
+    - if: '$CI_MERGE_REQUEST_LABELS =~ /^(?:[^,\n\r]+,)*target_test(?:,[^,\n\r]+)*$/i'
+    - if: '$CI_MERGE_REQUEST_LABELS =~ /^(?:[^,\n\r]+,)*integration_test(?:,[^,\n\r]+)*$/i'
+    - if: '$CI_MERGE_REQUEST_LABELS =~ /^(?:[^,\n\r]+,)*build(?:,[^,\n\r]+)*$/i'
 
 gen_integration_pipeline:
   extends:
@@ -30,8 +34,7 @@ gen_integration_pipeline:
   image: ${CI_INTEGRATION_ASSIGN_ENV}
   stage: assign_test
   cache: []
-  tags:
-    - assign_test
+  tags: [fast_run, shiny]
   variables:
     SUBMODULES_TO_FETCH: "none"
     GIT_LFS_SKIP_SMUDGE: 1
@@ -43,6 +46,7 @@ gen_integration_pipeline:
     paths:
       - idf-integration-ci/child_pipeline/
     expire_in: 2 weeks
+    when: always
   script:
     - add_gitlab_ssh_keys
     - retry_failed git clone ${CI_GEN_INTEGRATION_PIPELINE_REPO} idf-integration-ci

.gitlab/ci/post_deploy.yml

@@ -0,0 +1,24 @@
+generate_failed_jobs_report:
+  stage: post_deploy
+  tags: [build, shiny]
+  image: $ESP_ENV_IMAGE
+  when: always
+  dependencies: []  # Do not download artifacts from the previous stages
+  artifacts:
+    expire_in: 1 week
+    when: always
+    paths:
+      - job_report.html
+  script:
+    - python tools/ci/dynamic_pipelines/scripts/generate_report.py --report-type job
+
+sync_support_status:
+  stage: post_deploy
+  extends:
+    - .rules:sync_support_status
+  needs:
+    - push_to_github
+  image: $ESP_ENV_IMAGE
+  tags: [ brew, github_sync ]
+  script:
+    - curl --fail --request POST --form token="$IDF_STATUS_TRIG_TOKEN" --form ref="$IDF_STATUS_BRANCH" --form "variables[UPLOAD_TO_S3]=true" "$IDF_STATUS_TRIG_URL"

.gitlab/ci/pre_check.yml

@@ -3,56 +3,7 @@
   image: $ESP_ENV_IMAGE
   tags:
     - host_test
-  dependencies: []
-
-.check_pre_commit_template:
-  extends:
-    - .pre_check_template
-    - .before_script:minimal
-  image: $PRE_COMMIT_IMAGE
-
-check_pre_commit_master_release:
-  extends:
-    - .check_pre_commit_template
-    - .rules:protected
-  script:
-    - fetch_submodules
-    - git diff-tree --no-commit-id --name-only -r $PIPELINE_COMMIT_SHA | xargs pre-commit run --files
-
-check_pre_commit_MR:
-  extends:
-    - .check_pre_commit_template
-    - .rules:mr
-  script:
-    - fetch_submodules
-    - python ${CI_PROJECT_DIR}/tools/ci/ci_get_mr_info.py files ${CI_MERGE_REQUEST_SOURCE_BRANCH_NAME} | xargs pre-commit run --files
-
-check_MR_style_dangerjs:
-  extends:
-    - .pre_check_template
-  image: node:18.15.0-alpine3.16
-  variables:
-    DANGER_GITLAB_API_TOKEN: ${ESPCI_TOKEN}
-    DANGER_GITLAB_HOST: ${GITLAB_HTTP_SERVER}
-    DANGER_GITLAB_API_BASE_URL: ${GITLAB_HTTP_SERVER}/api/v4
-    DANGER_JIRA_USER: ${DANGER_JIRA_USER}
-    DANGER_JIRA_PASSWORD: ${DANGER_JIRA_PASSWORD}
-  cache:
-    # pull only for most of the use cases since it's cache dir.
-    # Only set "push" policy for "upload_cache" stage jobs
-    key:
-      files:
-        - .gitlab/dangerjs/package-lock.json
-    paths:
-      - .gitlab/dangerjs/node_modules/
-    policy: pull
-  before_script:
-    - cd .gitlab/dangerjs
-    - npm install --no-progress --no-update-notifier  # Install danger dependencies
-  script:
-    - npx danger ci --failOnErrors -v
-  rules:
-    - if: '$CI_PIPELINE_SOURCE == "merge_request_event"'
+  dependencies: # set dependencies to null to avoid missing artifacts issue
 
 check_version:
   # Don't run this for feature/bugfix branches, so that it is possible to modify
@@ -60,6 +11,13 @@ check_version:
   extends:
     - .pre_check_template
     - .rules:protected
+  tags: [ brew, github_sync ]
+  variables:
+    # need a full clone to get the latest tag
+    # the --shallow-since=$(git log -1 --format=%as $LATEST_GIT_TAG) option is not accurate
+    GIT_STRATEGY: fetch
+    SUBMODULES_TO_FETCH: "none"
+    GIT_DEPTH: 0
   script:
     - export IDF_PATH=$PWD
     - tools/ci/check_idf_version.sh
@@ -67,7 +25,8 @@ check_version:
 check_api_usage:
   extends: .pre_check_template
   script:
-    - tools/ci/check_examples_rom_header.sh
+    - python -m pip install ast-grep-cli # use ast-grep to describe customized lint rules
+    - ast-grep scan
     - tools/ci/check_api_violation.sh
     - tools/ci/check_examples_extra_component_dirs.sh
 
@@ -85,6 +44,9 @@ check_blobs:
     - IDF_TARGET=esp32c2 $IDF_PATH/components/esp_wifi/test_md5/test_md5.sh
     - IDF_TARGET=esp32c3 $IDF_PATH/components/esp_wifi/test_md5/test_md5.sh
     - IDF_TARGET=esp32c6 $IDF_PATH/components/esp_wifi/test_md5/test_md5.sh
+    - IDF_TARGET=esp32c5 $IDF_PATH/components/esp_wifi/test_md5/test_md5.sh
+    - IDF_TARGET=esp32c61 $IDF_PATH/components/esp_wifi/test_md5/test_md5.sh
+    - IDF_TARGET=esp32_host $IDF_PATH/components/esp_wifi/test_md5/test_md5.sh
     # Check if Coexistence library header files match between IDF and the version used when compiling the libraries
     - IDF_TARGET=esp32 $IDF_PATH/components/esp_coex/test_md5/test_md5.sh
     - IDF_TARGET=esp32s2 $IDF_PATH/components/esp_coex/test_md5/test_md5.sh
@@ -93,23 +55,11 @@ check_blobs:
     - IDF_TARGET=esp32c3 $IDF_PATH/components/esp_coex/test_md5/test_md5.sh
     - IDF_TARGET=esp32c6 $IDF_PATH/components/esp_coex/test_md5/test_md5.sh
     - IDF_TARGET=esp32h2 $IDF_PATH/components/esp_coex/test_md5/test_md5.sh
+    - IDF_TARGET=esp32c5 $IDF_PATH/components/esp_coex/test_md5/test_md5.sh
+    - IDF_TARGET=esp32c61 $IDF_PATH/components/esp_coex/test_md5/test_md5.sh
     # Check if Wi-Fi, PHY, BT blobs contain references to specific symbols
     - bash $IDF_PATH/tools/ci/check_blobs.sh
 
-check_public_headers:
-  extends:
-    - .pre_check_template
-    - .rules:build:check
-  script:
-    - IDF_TARGET=esp32 python tools/ci/check_public_headers.py --jobs 4 --prefix xtensa-esp32-elf-
-    - IDF_TARGET=esp32s2 python tools/ci/check_public_headers.py --jobs 4 --prefix xtensa-esp32s2-elf-
-    - IDF_TARGET=esp32s3 python tools/ci/check_public_headers.py --jobs 4 --prefix xtensa-esp32s3-elf-
-    - IDF_TARGET=esp32c3 python tools/ci/check_public_headers.py --jobs 4 --prefix riscv32-esp-elf-
-    - IDF_TARGET=esp32c2 python tools/ci/check_public_headers.py --jobs 4 --prefix riscv32-esp-elf-
-    - IDF_TARGET=esp32c6 python tools/ci/check_public_headers.py --jobs 4 --prefix riscv32-esp-elf-
-    - IDF_TARGET=esp32h2 python tools/ci/check_public_headers.py --jobs 4 --prefix riscv32-esp-elf-
-    - IDF_TARGET=esp32p4 python tools/ci/check_public_headers.py --jobs 4 --prefix riscv32-esp-elf-
-
 check_chip_support_components:
   extends:
     - .pre_check_template
@@ -122,7 +72,7 @@ check_chip_support_components:
     expire_in: 1 week
   script:
     - python tools/ci/check_soc_headers_leak.py
-    - find ${IDF_PATH}/components/soc/*/include/soc/ -name "*_struct.h" -print0 | xargs -0 -n1 ./tools/ci/check_soc_struct_headers.py
+    - find ${IDF_PATH}/components/soc/**/include/soc/ ${IDF_PATH}/components/soc/**/register/soc/ -name "*_struct.h" -print0 | xargs -0 -n1 ./tools/ci/check_soc_struct_headers.py
     - tools/ci/check_esp_memory_utils_headers.sh
 
 check_esp_err_to_name:
@@ -148,25 +98,29 @@ check_esp_system:
 
 # For release tag pipelines only, make sure the tag was created with 'git tag -a' so it will update
 # the version returned by 'git describe'
+# Don't forget to update the env var `LATEST_GIT_TAG` in .gitlab/ci/common.yml
 check_version_tag:
   extends:
     - .pre_check_template
     - .rules:tag:release
+  tags: [ brew, github_sync ]
+  variables:
+    # need a full clone to get the latest tag
+    # the --shallow-since=$(git log -1 --format=%as $LATEST_GIT_TAG) option is not accurate
+    GIT_STRATEGY: fetch
+    SUBMODULES_TO_FETCH: "none"
+    GIT_DEPTH: 0
   script:
     - (git cat-file -t $CI_COMMIT_REF_NAME | grep tag) || (echo "ESP-IDF versions must be annotated tags." && exit 1)
 
-check_artifacts_expire_time:
-  extends: .pre_check_template
-  script:
-    # check if we have set expire time for all artifacts
-    - python tools/ci/check_artifacts_expire_time.py
-
 check_test_scripts_build_test_rules:
   extends:
     - .pre_check_template
     - .before_script:build
+  variables:
+    PYTEST_IGNORE_COLLECT_IMPORT_ERROR: "1"
   script:
-    # required pytest related packages
+    # requires basic pytest dependencies
     - run_cmd bash install.sh --enable-pytest
     - python tools/ci/check_build_test_rules.py check-test-scripts examples/ tools/test_apps components
 
@@ -179,22 +133,89 @@ check_configure_ci_environment_parsing:
     - cd tools/ci
     - python -m unittest ci_build_apps.py
 
-mr_variables:
+pipeline_variables:
   extends:
     - .pre_check_template
-    - .rules:mr
-    - .before_script:minimal
-  tags:
-    - build
+    - .before_script:fetch:git_diff
+  tags: [fast_run, shiny]
   script:
-    - echo "MR_MODIFIED_FILES=$(python tools/ci/ci_get_mr_info.py files ${CI_MERGE_REQUEST_SOURCE_BRANCH_NAME} | xargs)" >> mr.env
-    - echo "MR_MODIFIED_COMPONENTS=$(python tools/ci/ci_get_mr_info.py components ${CI_MERGE_REQUEST_SOURCE_BRANCH_NAME} | xargs)" >> mr.env
-    - >
-      if echo "$CI_MERGE_REQUEST_LABELS" | egrep "(^|,)BUILD_AND_TEST_ALL_APPS(,|$)"; then
-        echo "BUILD_AND_TEST_ALL_APPS=1" >> mr.env
+    # MODIFIED_FILES is a list of files that changed, could be used everywhere
+    - MODIFIED_FILES=$(echo "$GIT_DIFF_OUTPUT" | xargs)
+    - echo "MODIFIED_FILES=$MODIFIED_FILES" >> pipeline.env
+    - echo "REPORT_EXIT_CODE=0" >> pipeline.env
+    # MR_MODIFIED_FILES and MR_MODIFIED_COMPONENTS are semicolon separated lists that is used in MR only
+    # for non MR pipeline, these are empty lists
+    - |
+      if [ $IS_MR_PIPELINE == "0" ]; then
+        echo "MR_MODIFIED_FILES=\"\"" >> pipeline.env
+        echo "MR_MODIFIED_COMPONENTS=\"\"" >> pipeline.env
+      else
+        MR_MODIFIED_FILES=$(echo "$GIT_DIFF_OUTPUT" | tr '\n' ';')
+        echo "MR_MODIFIED_FILES=\"$MR_MODIFIED_FILES\"" >> pipeline.env
+
+        MR_MODIFIED_COMPONENTS=$(run_cmd python tools/ci/ci_get_mr_info.py components --modified-files $MODIFIED_FILES | tr '\n' ';')
+        echo "MR_MODIFIED_COMPONENTS=\"$MR_MODIFIED_COMPONENTS\"" >> pipeline.env
       fi
-    - cat mr.env
+    - |
+      if echo "$CI_MERGE_REQUEST_LABELS" | egrep "(^|,)BUILD_AND_TEST_ALL_APPS(,|$)"; then
+        echo "BUILD_AND_TEST_ALL_APPS=1" >> pipeline.env
+      fi
+    # run full pipeline if testing constraint branch
+    - |
+      if [ -n "$CI_PYTHON_CONSTRAINT_BRANCH" ]; then
+        echo "BUILD_AND_TEST_ALL_APPS=1" >> pipeline.env
+      fi
+    - python tools/ci/ci_process_description.py
+    - cat pipeline.env
+    - python tools/ci/artifacts_handler.py upload --type modified_files_and_components_report
   artifacts:
     reports:
-      dotenv: mr.env
-    expire_in: 4 days
+      dotenv: pipeline.env
+    paths:
+      - pipeline.env
+    expire_in: 1 week
+    when: always
+
+baseline_manifest_sha:
+  extends:
+    - .pre_check_template
+    - .rules:dev-push
+  tags: [fast_run, shiny]
+  script:
+    - |
+      # merged results pipelines, by default
+      # diff between target-branch-head and merged-result-head
+      if [ -n "$CI_MERGE_REQUEST_TARGET_BRANCH_SHA" ]; then
+        git fetch origin $CI_MERGE_REQUEST_TARGET_BRANCH_SHA --depth=1
+        git checkout FETCH_HEAD
+        idf-build-apps dump-manifest-sha \
+          --manifest-files $(find . -name ".build-test-rules.yml" | xargs) \
+          --output .manifest_sha
+      # merge request pipelines, when the mr got conflicts
+      # diff between diff-base-sha and merge-request-head
+      elif [ -n "$CI_MERGE_REQUEST_DIFF_BASE_SHA" ]; then
+        git fetch origin $CI_MERGE_REQUEST_DIFF_BASE_SHA --depth=1
+        git checkout FETCH_HEAD
+        idf-build-apps dump-manifest-sha \
+          --manifest-files $(find . -name ".build-test-rules.yml" | xargs) \
+          --output .manifest_sha
+      # other pipelines, like the protected branches pipelines
+      # not triggered in this job
+      fi
+  artifacts:
+    paths:
+      - .manifest_sha
+    expire_in: 1 week
+    when: always
+
+redundant_pass_job:
+  stage: pre_check
+  tags: [shiny, fast_run]
+  image: $ESP_ENV_IMAGE
+  dependencies: null
+  before_script: []
+  cache: []
+  extends: []
+  script:
+    - echo "This job is redundant to ensure the 'retry_failed_jobs' job can exist and not be skipped"
+  when: always

.gitlab/ci/pre_commit.yml

@@ -0,0 +1,80 @@
+.check_pre_commit_template:
+  extends:
+    - .before_script:minimal
+  stage: pre_check
+  image: $PRE_COMMIT_IMAGE
+  tags: [cache, shiny]
+  needs:
+    - pipeline_variables
+  variables:
+    # cache pre_commit
+    PRE_COMMIT_HOME: "$CI_PROJECT_DIR/.cache/pre-commit"
+  script:
+    - fetch_submodules
+    - pre-commit run --files $MODIFIED_FILES
+    - pre-commit run --hook-stage post-commit validate-sbom-manifest
+
+check_pre_commit_upload_cache:
+  extends:
+    - .check_pre_commit_template
+  rules:
+    - if: '($CI_COMMIT_REF_NAME == "master" || $CI_COMMIT_BRANCH =~ /^release\/v/) && $CI_PIPELINE_SOURCE == "push"'
+  cache:
+    - key: pre_commit-cache-${LATEST_GIT_TAG}
+      paths:
+        - .cache/pre-commit
+      policy: pull-push
+    - key: submodule-cache-${LATEST_GIT_TAG}
+      paths:
+        - .cache/submodule_archives
+      policy: pull
+
+check_pre_commit:
+  extends:
+    - .check_pre_commit_template
+  rules:
+    - if: '($CI_COMMIT_REF_NAME == "master" || $CI_COMMIT_BRANCH =~ /^release\/v/) && $CI_PIPELINE_SOURCE == "push"'
+      when: never
+    - when: on_success
+  cache:
+    - key: pre_commit-cache-${LATEST_GIT_TAG}
+      paths:
+        - .cache/pre-commit
+      policy: pull
+    - key: submodule-cache-${LATEST_GIT_TAG}
+      paths:
+        - .cache/submodule_archives
+      policy: pull
+
+check_powershell:
+  extends:
+    - .before_script:minimal
+  stage: pre_check
+  image: docker:latest
+  services:
+    - docker:dind
+  tags:
+    - dind
+    - amd64
+  needs:
+    - pipeline_variables
+  variables:
+    # cache pre_commit
+    PRE_COMMIT_HOME: "$CI_PROJECT_DIR/.cache/pre-commit"
+  rules:
+    - changes:
+        - "*.ps1"
+  script:
+    - apk add python3
+    - apk add py3-pip
+    - pip install pre-commit --break-system-packages
+    - pre-commit run --hook-stage manual check-powershell-scripts --files $MODIFIED_FILES
+  cache:
+    - key: pre_commit-cache-${LATEST_GIT_TAG}
+      paths:
+        - .cache/pre-commit
+      policy: pull
+    - key: submodule-cache-${LATEST_GIT_TAG}
+      paths:
+        - .cache/submodule_archives
+      policy: pull

.gitlab/ci/retry_failed_jobs.yml

@@ -0,0 +1,15 @@
+retry_failed_jobs:
+  stage: retry_failed_jobs
+  tags: [shiny, fast_run]
+  allow_failure: true
+  image: $ESP_ENV_IMAGE
+  dependencies: null
+  before_script: []
+  cache: []
+  extends: []
+  script:
+    - echo "Retrieving and retrying all failed jobs for the pipeline..."
+    - python tools/ci/python_packages/gitlab_api.py retry_failed_jobs $CI_MERGE_REQUEST_PROJECT_ID --pipeline_id $CI_PIPELINE_ID
+  when: manual
+  needs:
+    - redundant_pass_job

.gitlab/ci/static-code-analysis.yml

@@ -6,8 +6,8 @@ clang_tidy_check:
   artifacts:
     paths:
       - clang_tidy_reports/
+    expire_in: 1 week
     when: always
-    expire_in: 1 day
   variables:
     IDF_TOOLCHAIN: clang
   script:
@@ -16,100 +16,84 @@ clang_tidy_check:
       --limit-file tools/ci/static-analysis-rules.yml
       --xtensa-include-dir
 
-check_pylint:
-  extends:
-    - .pre_check_template
-    - .rules:patterns:python-files
-  artifacts:
-    when: always
-    reports:
-      codequality: pylint.json
-    expire_in: 1 week
-  script:
-    - |
-      if [ -n "$CI_MERGE_REQUEST_IID" ]; then
-        export files=$(python ${CI_PROJECT_DIR}/tools/ci/ci_get_mr_info.py files ${CI_MERGE_REQUEST_SOURCE_BRANCH_NAME} | grep ".py$");
-      else
-        export files=$(find . -iname "*.py" -print);
-      fi
-    - if [ -z "$files" ]; then echo "No python files found"; exit 0; fi
-    - run_cmd pylint --exit-zero --load-plugins=pylint_gitlab --output-format=gitlab-codeclimate:pylint.json $files
-
-# build stage
-# Sonarqube related jobs put here for this reason:
-# Here we have two jobs. code_quality_check and code_quality_report.
 #
-# code_quality_check will analyze the code changes between your MR and
-# code repo stored in sonarqube server. The analysis result is only shown in
-# the comments under this MR and won't be transferred to the server.
+## build stage
+## Sonarqube related jobs put here for this reason:
+## Here we have two jobs. code_quality_check and code_quality_report.
+##
+## code_quality_check will analyze the code changes between your MR and
+## code repo stored in sonarqube server. The analysis result is only shown in
+## the comments under this MR and won't be transferred to the server.
+##
+## code_quality_report will analyze and transfer both of the newly added code
+## and the analysis result to the server.
+##
+## Put in the front to ensure that the newly merged code can be stored in
+## sonarqube server ASAP, in order to avoid reporting unrelated code issues
+#.sonar_scan_template:
+#  stage: build
+#  extends: .pre_check_template
+#  # full clone since this image does not support fetch --shallow-since-cutoff
+#  # shiny runners are used for full clone
+#  tags: [build, shiny]
+#  image: $SONARQUBE_SCANNER_IMAGE
+#  before_script:
+#    - source tools/ci/utils.sh
+#    - export PYTHONPATH="$CI_PROJECT_DIR/tools:$CI_PROJECT_DIR/tools/ci/python_packages:$PYTHONPATH"
+#    - fetch_submodules
+#    # Exclude the submodules, all paths ends with /**
+#    - submodules=$(get_all_submodules)
+#    # get all exclude paths specified in tools/ci/sonar_exclude_list.txt | ignore lines start with # | xargs | replace all <space> to <comma>
+#    - custom_excludes=$(cat $CI_PROJECT_DIR/tools/ci/sonar_exclude_list.txt | grep -v '^#' | xargs | sed -e 's/ /,/g')
+#    # Exclude the report dir as well
+#    - export EXCLUSIONS="$custom_excludes,$submodules"
+#    - export SONAR_SCANNER_OPTS="-Xmx2048m"
+#  variables:
+#    GIT_DEPTH: 0
+#    REPORT_PATTERN: clang_tidy_reports/**/*.txt
+#  artifacts:
+#    paths:
+#      - $REPORT_PATTERN
+#    expire_in: 1 week
+#    when: always
+#  dependencies:  # Here is not a hard dependency relationship, could be skipped when only python files changed. so we do not use "needs" here.
+#    - clang_tidy_check
 #
-# code_quality_report will analyze and transfer both of the newly added code
-# and the analysis result to the server.
+#code_quality_check:
+#  extends:
+#    - .sonar_scan_template
+#    - .rules:patterns:static-code-analysis-preview
+#  allow_failure: true  # it's using exit code to indicate the code analysis result,
+#                       # we don't want to block ci when critical issues founded
+#  script:
+#    - export CI_MERGE_REQUEST_COMMITS=$(python ${CI_PROJECT_DIR}/tools/ci/ci_get_mr_info.py commits --src-branch ${CI_COMMIT_REF_NAME} | tr '\n' ',')
+#    # test if this branch have merge request, if not, exit 0
+#    - test -n "$CI_MERGE_REQUEST_IID" || exit 0
+#    - test -n "$CI_MERGE_REQUEST_COMMITS" || exit 0
+#    - sonar-scanner
+#      -Dsonar.analysis.mode=preview
+#      -Dsonar.branch.name=$CI_MERGE_REQUEST_SOURCE_BRANCH_NAME
+#      -Dsonar.cxx.clangtidy.reportPath=$REPORT_PATTERN
+#      -Dsonar.exclusions=$EXCLUSIONS
+#      -Dsonar.gitlab.ci_merge_request_iid=$CI_MERGE_REQUEST_IID
+#      -Dsonar.gitlab.commit_sha=$CI_MERGE_REQUEST_COMMITS
+#      -Dsonar.gitlab.merge_request_discussion=true
+#      -Dsonar.gitlab.ref_name=$CI_MERGE_REQUEST_SOURCE_BRANCH_NAME
+#      -Dsonar.host.url=$SONAR_HOST_URL
+#      -Dsonar.login=$SONAR_LOGIN
 #
-# Put in the front to ensure that the newly merged code can be stored in
-# sonarqube server ASAP, in order to avoid reporting unrelated code issues
-.sonar_scan_template:
-  stage: build
-  extends: .pre_check_template
-  image:
-    name: $SONARQUBE_SCANNER_IMAGE
-  before_script:
-    - source tools/ci/utils.sh
-    - export PYTHONPATH="$CI_PROJECT_DIR/tools:$CI_PROJECT_DIR/tools/ci/python_packages:$PYTHONPATH"
-    - fetch_submodules
-    # Exclude the submodules, all paths ends with /**
-    - submodules=$(get_all_submodules)
-    # get all exclude paths specified in tools/ci/sonar_exclude_list.txt | ignore lines start with # | xargs | replace all <space> to <comma>
-    - custom_excludes=$(cat $CI_PROJECT_DIR/tools/ci/sonar_exclude_list.txt | grep -v '^#' | xargs | sed -e 's/ /,/g')
-    # Exclude the report dir as well
-    - export EXCLUSIONS="$custom_excludes,$submodules"
-    - export SONAR_SCANNER_OPTS="-Xmx2048m"
-  variables:
-    GIT_DEPTH: 0
-    REPORT_PATTERN: clang_tidy_reports/*.txt
-  artifacts:
-    when: always
-    paths:
-      - $REPORT_PATTERN
-    expire_in: 1 week
-  dependencies:  # Here is not a hard dependency relationship, could be skipped when only python files changed. so we do not use "needs" here.
-    - clang_tidy_check
-
-code_quality_check:
-  extends:
-    - .sonar_scan_template
-    - .rules:patterns:static-code-analysis-preview
-  allow_failure: true  # since now it's using exit code to indicate the code analysis result,
-                       # we don't want to block ci when critical issues founded
-  script:
-    - export CI_MERGE_REQUEST_COMMITS=$(python ${CI_PROJECT_DIR}/tools/ci/ci_get_mr_info.py commits ${CI_COMMIT_REF_NAME} | tr '\n' ',')
-    # test if this branch have merge request, if not, exit 0
-    - test -n "$CI_MERGE_REQUEST_IID" || exit 0
-    - test -n "$CI_MERGE_REQUEST_COMMITS" || exit 0
-    - sonar-scanner
-      -Dsonar.analysis.mode=preview
-      -Dsonar.branch.name=$CI_MERGE_REQUEST_SOURCE_BRANCH_NAME
-      -Dsonar.cxx.clangtidy.reportPath=$REPORT_PATTERN
-      -Dsonar.exclusions=$EXCLUSIONS
-      -Dsonar.gitlab.ci_merge_request_iid=$CI_MERGE_REQUEST_IID
-      -Dsonar.gitlab.commit_sha=$CI_MERGE_REQUEST_COMMITS
-      -Dsonar.gitlab.merge_request_discussion=true
-      -Dsonar.gitlab.ref_name=$CI_MERGE_REQUEST_SOURCE_BRANCH_NAME
-      -Dsonar.host.url=$SONAR_HOST_URL
-      -Dsonar.login=$SONAR_LOGIN
-
-code_quality_report:
-  extends:
-    - .sonar_scan_template
-    - .rules:protected
-  allow_failure: true  # since now it's using exit code to indicate the code analysis result,
-                       # we don't want to block ci when critical issues founded
-  script:
-    - sonar-scanner
-      -Dsonar.branch.name=$CI_COMMIT_REF_NAME
-      -Dsonar.cxx.clangtidy.reportPath=$REPORT_PATTERN
-      -Dsonar.exclusions=$EXCLUSIONS
-      -Dsonar.gitlab.commit_sha=$PIPELINE_COMMIT_SHA
-      -Dsonar.gitlab.ref_name=$CI_COMMIT_REF_NAME
-      -Dsonar.host.url=$SONAR_HOST_URL
-      -Dsonar.login=$SONAR_LOGIN
+#code_quality_report:
+#  extends:
+#    - .sonar_scan_template
+#    - .rules:protected
+#  allow_failure: true  # it's using exit code to indicate the code analysis result,
+#                       # we don't want to block ci when critical issues founded
+#  script:
+#    - sonar-scanner
+#      -Dsonar.branch.name=$CI_COMMIT_REF_NAME
+#      -Dsonar.cxx.clangtidy.reportPath=$REPORT_PATTERN
+#      -Dsonar.exclusions=$EXCLUSIONS
+#      -Dsonar.gitlab.commit_sha=$PIPELINE_COMMIT_SHA
+#      -Dsonar.gitlab.ref_name=$CI_COMMIT_REF_NAME
+#      -Dsonar.host.url=$SONAR_HOST_URL
+#      -Dsonar.login=$SONAR_LOGIN

.gitlab/ci/test-win.yml

@@ -0,0 +1,97 @@
+# Host tests
+.host_test_win_template:
+  extends: .rules:test:host_test
+  stage: host_test
+  image: $ESP_ENV_IMAGE
+  tags:
+    - windows-build
+  dependencies: # set dependencies to null to avoid missing artifacts issue
+  # run host_test jobs immediately, only after upload cache
+  needs:
+    - job: upload-pip-cache
+      optional: true
+      artifacts: false
+    - job: upload-submodules-cache
+      optional: true
+      artifacts: false
+  before_script: []
+  after_script: []
+
+test_cli_installer_win:
+  extends:
+    - .host_test_win_template
+    - .rules:labels:windows_pytest_build_system
+  artifacts:
+    when: on_failure
+    paths:
+      - tools/tools.new.json
+      - tools/test_idf_tools/test_python_env_logs.txt
+    expire_in: 1 week
+  variables:
+    IDF_PATH: "$CI_PROJECT_DIR"
+  timeout: 3h
+  script:
+    # Tools must be downloaded for testing
+    - python ${IDF_PATH}\tools\idf_tools.py download required qemu-riscv32 qemu-xtensa cmake
+    - cd ${IDF_PATH}\tools\test_idf_tools
+    - python -m pip install jsonschema
+    - python .\test_idf_tools.py
+    - python .\test_idf_tools_python_env.py
+
+test_tools_win:
+  extends:
+    - .host_test_win_template
+    - .rules:labels:windows_pytest_build_system
+  artifacts:
+    paths:
+      - ${IDF_PATH}/*.out
+      - ${IDF_PATH}/XUNIT_*.xml
+    reports:
+      junit: ${IDF_PATH}/XUNIT_*.xml
+    expire_in: 1 week
+    when: always
+  variables:
+    LC_ALL: C.UTF-8
+    PYTHONPATH: "$PYTHONPATH;$IDF_PATH\\tools;$IDF_PATH\\tools\\esp_app_trace;$IDF_PATH\\components\\partition_table;$IDF_PATH\\tools\\ci\\python_packages"
+  script:
+    - python -m pip install jsonschema
+    - .\install.ps1 --enable-ci --enable-pytest
+    - .\export.ps1
+    - python "${SUBMODULE_FETCH_TOOL}" -s "all"
+    - cd ${IDF_PATH}/tools/test_idf_py
+    - pytest --noconftest test_idf_py.py       --junitxml=${IDF_PATH}/XUNIT_IDF_PY.xml
+    - pytest --noconftest test_hints.py        --junitxml=${IDF_PATH}/XUNIT_HINTS.xml
+
+# Build tests
+.test_build_system_template_win:
+  stage: host_test
+  variables:
+  # Enable ccache for all build jobs. See configure_ci_environment.sh for more ccache related settings.
+    IDF_CCACHE_ENABLE: "1"
+    PYTHONPATH: "$PYTHONPATH;$IDF_PATH\\tools;$IDF_PATH\\tools\\esp_app_trace;$IDF_PATH\\components\\partition_table;$IDF_PATH\\tools\\ci\\python_packages"
+  before_script: []
+  after_script: []
+  timeout: 4 hours
+  script:
+    - .\install.ps1 --enable-ci --enable-pytest
+    - . .\export.ps1
+    - python "${SUBMODULE_FETCH_TOOL}" -s "all"
+    - cd ${IDF_PATH}\tools\test_build_system
+    - pytest --parallel-count ${CI_NODE_TOTAL} --parallel-index ${CI_NODE_INDEX} --junitxml=${CI_PROJECT_DIR}\XUNIT_RESULT.xml
+
+pytest_build_system_win:
+  extends:
+    - .test_build_system_template_win
+    - .rules:labels:windows_pytest_build_system
+  parallel: 2
+  needs: []
+  tags:
+    - windows-build
+  artifacts:
+    paths:
+      - XUNIT_RESULT.xml
+      - test_build_system
+    expire_in: 2 days
+    reports:
+      junit: XUNIT_RESULT.xml
+    when: always

.gitlab/ci/upload_cache.yml

@@ -10,12 +10,12 @@ upload-pip-cache:
   extends:
     - .upload_cache_template
     - .before_script:minimal
-    - .rules:patterns:python-cache
+    - .rules:upload-python-cache
   tags:
     - $GEO
     - cache
   cache:
-    key: pip-cache
+    key: pip-cache-${LATEST_GIT_TAG}
     paths:
       - .cache/pip
     policy: push
@@ -30,12 +30,12 @@ upload-submodules-cache:
   extends:
     - .upload_cache_template
     - .before_script:minimal
-    - .rules:patterns:submodule
+    - .rules:upload-submodule-cache
   tags:
     - $GEO
     - cache
   cache:
-    key: submodule-cache
+    key: submodule-cache-${LATEST_GIT_TAG}
     paths:
       - .cache/submodule_archives
     policy: push
@@ -48,27 +48,3 @@ upload-submodules-cache:
   parallel:
     matrix:
       - GEO: [ 'shiny',  'brew' ]
-
-upload-danger-npm-cache:
-  stage: upload_cache
-  image: node:18.15.0-alpine3.16
-  extends:
-    - .rules:patterns:dangerjs
-  tags:
-    - $GEO
-    - cache
-  cache:
-    key:
-      files:
-        - .gitlab/dangerjs/package-lock.json
-    paths:
-      - .gitlab/dangerjs/node_modules/
-    policy: push
-  before_script:
-    - echo "Skip before scripts ...."
-  script:
-    - cd .gitlab/dangerjs
-    - npm install --no-progress --no-update-notifier
-  parallel:
-    matrix:
-      - GEO: [ 'shiny', 'brew' ]

.gitlab/dangerjs/aiGenerateGitMessage.js

@@ -1,172 +0,0 @@
-const {
-    minimumSummaryChars,
-    maximumSummaryChars,
-    maximumBodyLineChars,
-    allowedTypes,
-} = require("./mrCommitsConstants.js");
-const { gptStandardModelTokens } = require("./mrCommitsConstants.js");
-
-const { ChatPromptTemplate } = require("langchain/prompts");
-const { SystemMessagePromptTemplate } = require("langchain/prompts");
-const { LLMChain } = require("langchain/chains");
-const { ChatOpenAI } = require("langchain/chat_models/openai");
-const openAiTokenCount = require("openai-gpt-token-counter");
-
-module.exports = async function () {
-    let outputDangerMessage = `\n\nPerhaps you could use an AI-generated suggestion for your commit message. Here is one `;
-
-    let mrDiff = await getMrGitDiff(danger.git.modified_files);
-    const mrCommitMessages = getCommitMessages(danger.gitlab.commits);
-    const inputPrompt = getInputPrompt();
-    const inputLlmTokens = getInputLlmTokens(
-        inputPrompt,
-        mrDiff,
-        mrCommitMessages
-    );
-    console.log(`Input tokens for LLM: ${inputLlmTokens}`);
-
-    if (inputLlmTokens >= gptStandardModelTokens) {
-        mrDiff = ""; // If the input mrDiff is larger than 16k model, don't use mrDiff, use only current commit messages
-        outputDangerMessage += `(based only on your current commit messages, git-diff of this MR is too big (${inputLlmTokens} tokens) for the AI models):\n\n`;
-    } else {
-        outputDangerMessage += `(based on your MR git-diff and your current commit messages):\n\n`;
-    }
-
-    // Generate AI commit message
-    let generatedCommitMessage = "";
-    try {
-        const rawCommitMessage = await createAiGitMessage(
-            inputPrompt,
-            mrDiff,
-            mrCommitMessages
-        );
-        generatedCommitMessage = postProcessCommitMessage(rawCommitMessage);
-    } catch (error) {
-        console.error("Error in generating AI commit message: ", error);
-        outputDangerMessage +=
-            "\nCould not generate commit message due to an error.\n";
-    }
-
-    // Append closing statements ("Closes https://github.com/espressif/esp-idf/issues/XXX") to the generated commit message
-    let closingStatements = extractClosingStatements(mrCommitMessages);
-    if (closingStatements.length > 0) {
-        generatedCommitMessage += "\n\n" + closingStatements;
-    }
-
-    // Add the generated git message, format to the markdown code block
-    outputDangerMessage += `\n\`\`\`\n${generatedCommitMessage}\n\`\`\`\n`;
-    outputDangerMessage +=
-        "\n**NOTE: AI-generated suggestions may not always be correct, please review the suggestion before using it.**"; // Add disclaimer
-    return outputDangerMessage;
-};
-
-async function getMrGitDiff(mrModifiedFiles) {
-    const fileDiffs = await Promise.all(
-        mrModifiedFiles.map((file) => danger.git.diffForFile(file))
-    );
-    return fileDiffs.map((fileDiff) => fileDiff.diff.trim()).join(" ");
-}
-
-function getCommitMessages(mrCommits) {
-    return mrCommits.map((commit) => commit.message);
-}
-
-function getInputPrompt() {
-    return `You are a helpful assistant that creates suggestions for single git commit message, that user can use to describe all the changes in their merge request.
-    Use git diff: {mrDiff} and users current commit messages: {mrCommitMessages} to get the changes made in the commit.
-
-    Output should be git commit message following the conventional commit format.
-
-    Output only git commit message in desired format, without comments and other text.
-
-    Do not include the closing statements ("Closes https://....") in the output.
-
-    Here are the strict rules you must follow:
-
-    - Avoid mentioning any JIRA tickets (e.g., "Closes JIRA-123").
-    - Be specific. Don't use vague terms (e.g., "some checks", "add new ones", "few changes").
-    - The commit message structure should be:  <type><(scope/component)>: <summary>
-    - Types allowed: ${allowedTypes.join(", ")}
-    - If 'scope/component' is used, it must start with a lowercase letter.
-    - The 'summary' must NOT end with a period.
-    - The 'summary' must be between ${minimumSummaryChars} and ${maximumSummaryChars} characters long.
-
-    If a 'body' of commit message is used:
-
-    - Each line must be no longer than ${maximumBodyLineChars} characters.
-    - It must be separated from the 'summary' by a blank line.
-
-    Examples of correct commit messages:
-
-        - With scope and body:
-            fix(freertos): Fix startup timeout issue
-
-            This is a text of commit message body...
-            - adds support for wifi6
-            - adds validations for logging script
-
-        - Without scope and body:
-            ci: added target test job for ESP32-Wifi6`;
-}
-
-function getInputLlmTokens(inputPrompt, mrDiff, mrCommitMessages) {
-    const mrCommitMessagesTokens = openAiTokenCount(mrCommitMessages.join(" "));
-    const gitDiffTokens = openAiTokenCount(mrDiff);
-    const promptTokens = openAiTokenCount(inputPrompt);
-    return mrCommitMessagesTokens + gitDiffTokens + promptTokens;
-}
-
-async function createAiGitMessage(inputPrompt, mrDiff, mrCommitMessages) {
-    const chat = new ChatOpenAI({ engine: "gpt-3.5-turbo", temperature: 0 });
-    const chatPrompt = ChatPromptTemplate.fromPromptMessages([
-        SystemMessagePromptTemplate.fromTemplate(inputPrompt),
-    ]);
-    const chain = new LLMChain({ prompt: chatPrompt, llm: chat });
-
-    const response = await chain.call({
-        mrDiff: mrDiff,
-        mrCommitMessages: mrCommitMessages,
-    });
-    return response.text;
-}
-
-function postProcessCommitMessage(rawCommitMessage) {
-    // Split the result into lines
-    let lines = rawCommitMessage.split("\n");
-
-    // Format each line
-    for (let i = 0; i < lines.length; i++) {
-        let line = lines[i].trim();
-
-        // If the line is longer than maximumBodyLineChars, split it into multiple lines
-        if (line.length > maximumBodyLineChars) {
-            let newLines = [];
-            while (line.length > maximumBodyLineChars) {
-                let lastSpaceIndex = line.lastIndexOf(
-                    " ",
-                    maximumBodyLineChars
-                );
-                newLines.push(line.substring(0, lastSpaceIndex));
-                line = line.substring(lastSpaceIndex + 1);
-            }
-            newLines.push(line);
-            lines[i] = newLines.join("\n");
-        }
-    }
-
-    // Join the lines back into a single string with a newline between each one
-    return lines.join("\n");
-}
-
-function extractClosingStatements(mrCommitMessages) {
-    let closingStatements = [];
-    mrCommitMessages.forEach((message) => {
-        const lines = message.split("\n");
-        lines.forEach((line) => {
-            if (line.startsWith("Closes")) {
-                closingStatements.push(line);
-            }
-        });
-    });
-    return closingStatements.join("\n");
-}

.gitlab/dangerjs/configParameters.js

@@ -1,56 +0,0 @@
-let outputStatuses = [];
-
-/**
- * Logs the status of a rule with padded formatting and stores it in the `outputStatuses` array.
- * If the rule already exists in the array, its status is updated.
- * @param message The name of the rule
- * @param status The output (exit) status of the rule
- */
-function recordRuleExitStatus(message, status) {
-    // Check if the rule already exists in the array
-    const existingRecord = outputStatuses.find(
-        (rule) => rule.message === message
-    );
-
-    if (existingRecord) {
-        // Update the status of the existing rule
-        existingRecord.status = status;
-    } else {
-        // If the rule doesn't exist, add it to the array
-        outputStatuses.push({ message, status });
-    }
-}
-
-/**
- * Displays all the rule output statuses stored in the `outputStatuses` array.
- * Filters out any empty lines, sorts them alphabetically, and prints the statuses
- * with a header and separator.
- * These statuses are later displayed in CI job tracelog.
- */
-function displayAllOutputStatuses() {
-    const lineLength = 100;
-    const sortedStatuses = outputStatuses.sort((a, b) =>
-        a.message.localeCompare(b.message)
-    );
-
-    const formattedLines = sortedStatuses.map((statusObj) => {
-        const paddingLength =
-            lineLength - statusObj.message.length - statusObj.status.length;
-        const paddedMessage = statusObj.message.padEnd(
-            statusObj.message.length + paddingLength,
-            "."
-        );
-        return `${paddedMessage} ${statusObj.status}`;
-    });
-
-    console.log(
-        "DangerJS checks (rules) output states:\n" + "=".repeat(lineLength + 2)
-    );
-    console.log(formattedLines.join("\n"));
-    console.log("=".repeat(lineLength + 2));
-}
-
-module.exports = {
-    displayAllOutputStatuses,
-    recordRuleExitStatus,
-};

.gitlab/dangerjs/dangerfile.js

@@ -1,51 +0,0 @@
-const { displayAllOutputStatuses } = require("./configParameters.js");
-
-/*
- * Modules with checks are stored in ".gitlab/dangerjs/<module_name>". To import them, use path relative to "dangerfile.js"
- */
-async function runChecks() {
-    // Checks for merge request title
-    require("./mrTitleNoDraftOrWip.js")();
-
-    // Checks for merge request description
-    require("./mrDescriptionLongEnough.js")();
-    require("./mrDescriptionReleaseNotes.js")();
-    await require("./mrDescriptionJiraLinks.js")();
-
-    // Checks for documentation
-    await require("./mrDocsTranslation.js")();
-
-    // Checks for MR commits
-    require("./mrCommitsTooManyCommits.js")();
-    await require("./mrCommitsCommitMessage.js")();
-    require("./mrCommitsEmail.js")();
-
-    // Checks for MR code
-    require("./mrSizeTooLarge.js")();
-
-    // Checks for MR area labels
-    await require("./mrAreaLabels.js")();
-
-    // Checks for Source branch name
-    require("./mrSourceBranchName.js")();
-
-    // Show DangerJS individual checks statuses - visible in CI job tracelog
-    displayAllOutputStatuses();
-
-    // Add success log if no issues
-    if (
-        results.fails.length === 0 &&
-        results.warnings.length === 0 &&
-        results.messages.length === 0
-    ) {
-        return message("🎉 Good Job! All checks are passing!");
-    }
-}
-
-runChecks();
-
-// Add retry link
-const retryLink = `${process.env.DANGER_GITLAB_HOST}/${process.env.CI_PROJECT_PATH}/-/jobs/${process.env.CI_JOB_ID}`;
-markdown(
-    `***\n#### :repeat: You can enforce automatic MR checks by retrying the [DangerJS job](${retryLink})\n***`
-);

.gitlab/dangerjs/mrAreaLabels.js

@@ -1,27 +0,0 @@
-const { recordRuleExitStatus } = require("./configParameters.js");
-
-/**
- * Check if MR has area labels (light blue labels)
- *
- * @dangerjs WARN
- */
-module.exports = async function () {
-    const ruleName = "Merge request area labels";
-    const projectId = 103; // ESP-IDF
-    const areaLabelColor = /^#d2ebfa$/i; // match color code (case-insensitive)
-    const projectLabels = await danger.gitlab.api.Labels.all(projectId); // Get all project labels
-    const areaLabels = projectLabels
-        .filter((label) => areaLabelColor.test(label.color))
-        .map((label) => label.name); // Filter only area labels
-    const mrLabels = danger.gitlab.mr.labels; // Get MR labels
-
-    if (!mrLabels.some((label) => areaLabels.includes(label))) {
-        recordRuleExitStatus(ruleName, "Failed");
-        return warn(
-            `Please add some [area labels](${process.env.DANGER_GITLAB_HOST}/espressif/esp-idf/-/labels) to this MR.`
-        );
-    }
-
-    // At this point, the rule has passed
-    recordRuleExitStatus(ruleName, "Passed");
-};

.gitlab/dangerjs/mrCommitsCommitMessage.js

@@ -1,165 +0,0 @@
-const {
-    minimumSummaryChars,
-    maximumSummaryChars,
-    maximumBodyLineChars,
-    allowedTypes,
-} = require("./mrCommitsConstants.js");
-const { recordRuleExitStatus } = require("./configParameters.js");
-
-/**
- * Check that commit messages are based on the Espressif ESP-IDF project's rules for git commit messages.
- *
- * @dangerjs WARN
- */
-module.exports = async function () {
-    const ruleName = "Commit messages style";
-    const mrCommits = danger.gitlab.commits;
-    const lint = require("@commitlint/lint").default;
-
-    const lintingRules = {
-        // rule definition: [(0-1 = off/on), (always/never = must be/mustn't be), (value)]
-        "body-max-line-length": [1, "always", maximumBodyLineChars], // Max length of the body line
-        "footer-leading-blank": [1, "always"], // Always have a blank line before the footer section
-        "footer-max-line-length": [1, "always", maximumBodyLineChars], // Max length of the footer line
-        "subject-max-length": [1, "always", maximumSummaryChars], // Max length of the "Summary"
-        "subject-min-length": [1, "always", minimumSummaryChars], // Min length of the "Summary"
-        "scope-case": [1, "always", "lower-case"], // "scope/component" must start with lower-case
-        "subject-full-stop": [1, "never", "."], // "Summary" must not end with a full stop (period)
-        "subject-empty": [1, "never"], // "Summary" is mandatory
-        "type-case": [1, "always", "lower-case"], // "type/action" must start with lower-case
-        "type-empty": [1, "never"], // "type/action" is mandatory
-        "type-enum": [1, "always", allowedTypes], // "type/action" must be one of the allowed types
-        "body-leading-blank": [1, "always"], // Always have a blank line before the body section
-    };
-
-    // Switcher for AI suggestions (for poor messages)
-    let generateAISuggestion = false;
-
-    // Search for the messages in each commit
-    let issuesAllCommitMessages = [];
-
-    for (const commit of mrCommits) {
-        const commitMessage = commit.message;
-        const commitMessageTitle = commit.title;
-
-        let issuesSingleCommitMessage = [];
-        let reportSingleCommitMessage = "";
-
-        // Check if the commit message contains any Jira ticket references
-        const jiraTicketRegex = /[A-Z0-9]+-[0-9]+/g;
-        const jiraTicketMatches = commitMessage.match(jiraTicketRegex);
-        if (jiraTicketMatches) {
-            const jiraTicketNames = jiraTicketMatches.join(", ");
-            issuesSingleCommitMessage.push(
-                `- probably contains Jira ticket reference (\`${jiraTicketNames}\`). Please remove Jira tickets from commit messages.`
-            );
-        }
-
-        // Lint commit messages with @commitlint (Conventional Commits style)
-        const result = await lint(commit.message, lintingRules);
-
-        for (const warning of result.warnings) {
-            // Custom messages for each rule with terminology used by Espressif conventional commits guide
-            switch (warning.name) {
-                case "subject-max-length":
-                    issuesSingleCommitMessage.push(
-                        `- *summary* appears to be too long`
-                    );
-                    break;
-                case "type-empty":
-                    issuesSingleCommitMessage.push(
-                        `- *type/action* looks empty`
-                    );
-                    break;
-                case "type-case":
-                    issuesSingleCommitMessage.push(
-                        `- *type/action* should start with a lowercase letter`
-                    );
-
-                    break;
-                case "scope-empty":
-                    issuesSingleCommitMessage.push(
-                        `- *scope/component* looks empty`
-                    );
-                    break;
-                case "scope-case":
-                    issuesSingleCommitMessage.push(
-                        `- *scope/component* should be lowercase without whitespace, allowed special characters are \`_\` \`/\` \`.\` \`,\` \`*\` \`-\` \`.\``
-                    );
-                    break;
-                case "subject-empty":
-                    issuesSingleCommitMessage.push(`- *summary* looks empty`);
-                    generateAISuggestion = true;
-                    break;
-                case "subject-min-length":
-                    issuesSingleCommitMessage.push(
-                        `- *summary* looks too short`
-                    );
-                    generateAISuggestion = true;
-                    break;
-                case "subject-case":
-                    issuesSingleCommitMessage.push(
-                        `- *summary* should start with a capital letter`
-                    );
-                    break;
-                case "subject-full-stop":
-                    issuesSingleCommitMessage.push(
-                        `- *summary* should not end with a period (full stop)`
-                    );
-                    break;
-                case "type-enum":
-                    issuesSingleCommitMessage.push(
-                        `- *type/action* should be one of [${allowedTypes
-                            .map((type) => `\`${type}\``)
-                            .join(", ")}]`
-                    );
-                    break;
-
-                default:
-                    issuesSingleCommitMessage.push(`- ${warning.message}`);
-            }
-        }
-
-        if (issuesSingleCommitMessage.length) {
-            reportSingleCommitMessage = `- the commit message \`"${commitMessageTitle}"\`:\n${issuesSingleCommitMessage
-                .map((message) => `  ${message}`) // Indent each issue by 2 spaces
-                .join("\n")}`;
-            issuesAllCommitMessages.push(reportSingleCommitMessage);
-        }
-    }
-
-    // Create report
-    if (issuesAllCommitMessages.length) {
-        issuesAllCommitMessages.sort();
-        const basicTips = [
-            `- correct format of commit message should be: \`<type/action>(<scope/component>): <summary>\`, for example \`fix(esp32): Fixed startup timeout issue\``,
-            `- allowed types are: \`${allowedTypes}\``,
-            `- sufficiently descriptive message summary should be between ${minimumSummaryChars} to ${maximumSummaryChars} characters and start with upper case letter`,
-            `- avoid Jira references in commit messages (unavailable/irrelevant for our customers)`,
-            `- follow this [commit messages guide](${process.env.DANGER_GITLAB_HOST}/espressif/esp-idf/-/wikis/dev-proc/Commit-messages)`,
-        ];
-        let dangerMessage = `\n**Some issues found for the commit messages in this MR:**\n${issuesAllCommitMessages.join(
-            "\n"
-        )}
-			\n***
-			\n**Please consider updating these commit messages** - here are some basic tips:\n${basicTips.join(
-                "\n"
-            )}
-            \n \`TIP:\` You can install commit-msg pre-commit hook (\`pre-commit install -t pre-commit -t commit-msg\`) to run this check when committing.
-            \n***
-            `;
-
-        if (generateAISuggestion) {
-            // Create AI generated suggestion for git commit message based of gitDiff and current commit messages
-            const AImessageSuggestion =
-                await require("./aiGenerateGitMessage.js")();
-            dangerMessage += AImessageSuggestion;
-        }
-
-        recordRuleExitStatus(ruleName, "Failed");
-        return warn(dangerMessage);
-    }
-
-    // At this point, the rule has passed
-    recordRuleExitStatus(ruleName, "Passed");
-};

.gitlab/dangerjs/mrCommitsConstants.js

@@ -1,16 +0,0 @@
-module.exports = {
-    gptStandardModelTokens: 4096,
-    minimumSummaryChars: 20,
-    maximumSummaryChars: 72,
-    maximumBodyLineChars: 100,
-    allowedTypes: [
-        "change",
-        "ci",
-        "docs",
-        "feat",
-        "fix",
-        "refactor",
-        "remove",
-        "revert",
-    ],
-};

.gitlab/dangerjs/mrCommitsEmail.js

@@ -1,23 +0,0 @@
-const { recordRuleExitStatus } = require("./configParameters.js");
-
-/**
- * Check if the author is accidentally making a commit using a personal email
- *
- * @dangerjs INFO
- */
-module.exports = function () {
-    const ruleName = 'Commits from outside Espressif';
-    const mrCommitAuthorEmails = danger.gitlab.commits.map(commit => commit.author_email);
-    const mrCommitCommitterEmails = danger.gitlab.commits.map(commit => commit.committer_email);
-	const emailPattern = /.*@espressif\.com/;
-	const filteredEmails = [...mrCommitAuthorEmails, ...mrCommitCommitterEmails].filter((email) => !emailPattern.test(email));
-	if (filteredEmails.length) {
-        recordRuleExitStatus(ruleName, "Failed");
-		return message(
-			`Some of the commits were authored or committed by developers outside Espressif: ${filteredEmails.join(', ')}. Please check if this is expected.`
-		);
-	}
-
-    // At this point, the rule has passed
-	recordRuleExitStatus(ruleName, 'Passed');
-};

.gitlab/dangerjs/mrCommitsTooManyCommits.js

@@ -1,22 +0,0 @@
-const { recordRuleExitStatus } = require("./configParameters.js");
-
-/**
- * Check if MR has not an excessive numbers of commits (if squashed)
- *
- * @dangerjs INFO
- */
-module.exports = function () {
-	const ruleName = 'Number of commits in merge request';
-    const tooManyCommitThreshold = 2; // above this number of commits, squash commits is suggested
-    const mrCommits = danger.gitlab.commits;
-
-    if (mrCommits.length > tooManyCommitThreshold) {
-        recordRuleExitStatus(ruleName, "Passed (with suggestions)");
-        return message(
-            `You might consider squashing your ${mrCommits.length} commits (simplifying branch history).`
-        );
-    }
-
-    // At this point, the rule has passed
-	recordRuleExitStatus(ruleName, 'Passed');
-};

.gitlab/dangerjs/mrDescriptionJiraLinks.js

@@ -1,238 +0,0 @@
-const { recordRuleExitStatus } = require("./configParameters.js");
-
-/** Check that there are valid JIRA links in MR description.
- *
- * This check extracts the "Related" section from the MR description and
- * searches for JIRA ticket references in the format "Closes [JIRA ticket key]".
- *
- * It then extracts the closing GitHub links from the corresponding JIRA tickets and
- * checks if the linked GitHub issues are still in open state.
- *
- * Finally, it checks if the required GitHub closing links are present in the MR's commit messages.
- *
- */
-module.exports = async function () {
-	const ruleName = 'Jira ticket references';
-    const axios = require("axios");
-    const mrDescription = danger.gitlab.mr.description;
-    const mrCommitMessages = danger.gitlab.commits.map(
-        (commit) => commit.message
-    );
-    const jiraTicketRegex = /[A-Z0-9]+-[0-9]+/;
-
-    let partMessages = []; // Create a blank field for future records of individual issues
-
-    // Parse section "Related" from MR Description
-    const sectionRelated = extractSectionRelated(mrDescription);
-
-    if (
-        !sectionRelated.header || // No section Related in MR description or ...
-        !jiraTicketRegex.test(sectionRelated.content) // no Jira links in section Related
-    ) {
-        recordRuleExitStatus(ruleName, 'Passed (with suggestions)');
-        return message(
-            "Please consider adding references to JIRA issues in the `Related` section of the MR description."
-        );
-    }
-
-    // Get closing (only) JIRA tickets
-    const jiraTickets = findClosingJiraTickets(sectionRelated.content);
-
-    for (const ticket of jiraTickets) {
-        ticket.jiraUIUrl = `https://jira.espressif.com:8443/browse/${ticket.ticketName}`;
-
-        if (!ticket.correctFormat) {
-            partMessages.push(
-                `- closing ticket \`${ticket.record}\` seems to be in the wrong format (or inaccessible to Jira DangerBot).. The correct format is for example \`- Closes JIRA-123\`.`
-            );
-        }
-
-        // Get closing GitHub issue links from JIRA tickets
-        const closingGithubLink = await getGitHubClosingLink(ticket.ticketName);
-        if (closingGithubLink) {
-            ticket.closingGithubLink = closingGithubLink;
-        } else if (closingGithubLink === null) {
-            partMessages.push(
-                `- the Jira issue number [\`${ticket.ticketName}\`](${ticket.jiraUIUrl}) seems to be invalid (please check if the ticket number is correct)`
-            );
-            continue; // Handle unreachable JIRA tickets; skip the following checks
-        } else {
-            continue; // Jira ticket have no GitHub closing link; skip the following checks
-        }
-
-        // Get still open GitHub issues
-        const githubIssueStatusOpen = await isGithubIssueOpen(
-            ticket.closingGithubLink
-        );
-        ticket.isOpen = githubIssueStatusOpen;
-        if (githubIssueStatusOpen === null) {
-            // Handle unreachable GitHub issues
-            partMessages.push(
-                `- the GitHub issue [\`${ticket.closingGithubLink}\`](${ticket.closingGithubLink}) does not seem to exist on GitHub (referenced from JIRA ticket [\`${ticket.ticketName}\`](${ticket.jiraUIUrl}) )`
-            );
-            continue; // skip the following checks
-        }
-
-        // Search in commit message if there are all GitHub closing links (from Related section) for still open GH issues
-        if (ticket.isOpen) {
-            if (
-                !mrCommitMessages.some((item) =>
-                    item.includes(`Closes ${ticket.closingGithubLink}`)
-                )
-            ) {
-                partMessages.push(
-                    `- please add \`Closes ${ticket.closingGithubLink}\` to the commit message`
-                );
-            }
-        }
-    }
-
-    // Create report / DangerJS check feedback if issues with Jira links found
-    if (partMessages.length) {
-        createReport();
-    }
-
-    // At this point, the rule has passed
-	recordRuleExitStatus(ruleName, 'Passed');
-
-    // ---------------------------------------------------------------
-
-    /**
-     * This function takes in a string mrDescription which contains a Markdown-formatted text
-     * related to a Merge Request (MR) in a GitLab repository. It searches for a section titled "Related"
-     * and extracts the content of that section. If the section is not found, it returns an object
-     * indicating that the header and content are null. If the section is found but empty, it returns
-     * an object indicating that the header is present but the content is null. If the section is found
-     * with content, it returns an object indicating that the header is present and the content of the
-     * "Related" section.
-     *
-     * @param {string} mrDescription - The Markdown-formatted text related to the Merge Request.
-     * @returns {{
-     *  header: string | boolean | null,
-     * 	content: string | null
-     * 	}} - An object containing the header and content of the "Related" section, if present.
-     */
-
-    function extractSectionRelated(mrDescription) {
-        const regexSectionRelated = /## Related([\s\S]*?)(?=## |$)/;
-        const sectionRelated = mrDescription.match(regexSectionRelated);
-        if (!sectionRelated) {
-            return { header: null, content: null }; // Section "Related" is missing
-        }
-
-        const content = sectionRelated[1].replace(/(\r\n|\n|\r)/gm, ""); // Remove empty lines
-        if (!content.length) {
-            return { header: true, content: null }; // Section "Related" is present, but empty
-        }
-
-        return { header: true, content: sectionRelated[1] }; // Found section "Related" with content
-    }
-
-    /**
-     * Finds all JIRA tickets that are being closed in the given sectionRelatedcontent.
-     * The function searches for lines that start with - Closes and have the format Closes [uppercase letters]-[numbers].
-     * @param {string} sectionRelatedcontent - A string that contains lines with mentions of JIRA tickets
-     * @returns {Array} An array of objects with ticketName property that has the correct format
-     */
-
-    function findClosingJiraTickets(sectionRelatedcontent) {
-        let closingTickets = [];
-        const lines = sectionRelatedcontent.split("\n");
-        for (const line of lines) {
-            if (!line.startsWith("- Closes")) {
-                continue; // Not closing-type ticket, skip
-            }
-
-            const correctJiraClosingLinkFormat = new RegExp(
-                `^- Closes ${jiraTicketRegex.source}$`
-            );
-            const matchedJiraTicket = line.match(jiraTicketRegex);
-            if (matchedJiraTicket) {
-                if (!correctJiraClosingLinkFormat.test(line)) {
-                    closingTickets.push({
-                        record: line,
-                        ticketName: matchedJiraTicket[0],
-                        correctFormat: false,
-                    });
-                } else {
-                    closingTickets.push({
-                        record: line,
-                        ticketName: matchedJiraTicket[0],
-                        correctFormat: true,
-                    });
-                }
-            }
-        }
-        return closingTickets;
-    }
-
-    /**
-     * This function takes a JIRA issue key and retrieves the description from JIRA's API.
-     * It then searches the description for a GitHub closing link in the format "Closes https://github.com/owner/repo/issues/123".
-     * If a GitHub closing link is found, it is returned. If no GitHub closing link is found, it returns null.
-     * @param {string} jiraIssueKey - The key of the JIRA issue to search for the GitHub closing link.
-     * @returns {Promise<string|null>} - A promise that resolves to a string containing the GitHub closing link if found,
-     * or null if not found.
-     */
-    async function getGitHubClosingLink(jiraIssueKey) {
-        let jiraDescription = "";
-
-        // Get JIRA ticket description content
-        try {
-            const response = await axios({
-                url: `https://jira.espressif.com:8443/rest/api/latest/issue/${jiraIssueKey}`,
-                auth: {
-                    username: process.env.DANGER_JIRA_USER,
-                    password: process.env.DANGER_JIRA_PASSWORD,
-                },
-            });
-            jiraDescription = response.data.fields.description
-                ? response.data.fields.description
-                : ""; // if the Jira ticket has an unfilled Description, the ".description" property is missing in API response - in that case set "jiraDescription" to an empty string
-        } catch (error) {
-            return null;
-        }
-
-        // Find GitHub closing link in description
-        const regexClosingGhLink =
-            /Closes\s+(https:\/\/github.com\/\S+\/\S+\/issues\/\d+)/;
-        const closingGithubLink = jiraDescription.match(regexClosingGhLink);
-
-        if (closingGithubLink) {
-            return closingGithubLink[1];
-        } else {
-            return false; // Jira issue has no GitHub closing link in description
-        }
-    }
-
-    /**
-     * Check if a GitHub issue linked in a merge request is still open.
-     *
-     * @param {string} link - The link to the GitHub issue.
-     * @returns {Promise<boolean>} A promise that resolves to a boolean indicating if the issue is open.
-     * @throws {Error} If the link is invalid or if there was an error fetching the issue.
-     */
-    async function isGithubIssueOpen(link) {
-        const parsedUrl = new URL(link);
-        const [owner, repo] = parsedUrl.pathname.split("/").slice(1, 3);
-        const issueNumber = parsedUrl.pathname.split("/").slice(-1)[0];
-
-        try {
-            const response = await axios.get(
-                `https://api.github.com/repos/${owner}/${repo}/issues/${issueNumber}`
-            );
-            return response.data.state === "open"; // return True if GitHub issue is open
-        } catch (error) {
-            return null; // GET request to issue fails
-        }
-    }
-
-    function createReport() {
-        partMessages.sort();
-        let dangerMessage = `Some issues found for the related JIRA tickets in this MR:\n${partMessages.join(
-            "\n"
-        )}`;
-        recordRuleExitStatus(ruleName, "Failed");
-        return warn(dangerMessage);
-    }
-};

.gitlab/dangerjs/mrDescriptionLongEnough.js

@@ -1,24 +0,0 @@
-const { recordRuleExitStatus } = require("./configParameters.js");
-
-/**
- * Check if MR Description has accurate description".
- *
- * @dangerjs WARN
- */
-module.exports = function () {
-    const ruleName = "Merge request sufficient description";
-    const mrDescription = danger.gitlab.mr.description;
-    const descriptionChunk = mrDescription.match(/^([^#]*)/)[1].trim(); // Extract all text before the first section header (i.e., the text before the "## Release notes")
-
-    const shortMrDescriptionThreshold = 50; // Description is considered too short below this number of characters
-
-    if (descriptionChunk.length < shortMrDescriptionThreshold) {
-        recordRuleExitStatus(ruleName, "Failed");
-        return warn(
-            "The MR description looks very brief, please check if more details can be added."
-        );
-    }
-
-    // At this point, the rule has passed
-    recordRuleExitStatus(ruleName, "Passed");
-};

.gitlab/dangerjs/mrDescriptionReleaseNotes.js

@@ -1,103 +0,0 @@
-const { recordRuleExitStatus } = require("./configParameters.js");
-
-/**
- * Check if MR Description contains mandatory section "Release notes"
- *
- * Extracts the content of the "Release notes" section from the GitLab merge request description.
- *
- * @dangerjs WARN (if section missing, is empty or wrong markdown format)
- */
-module.exports = function () {
-    const ruleName = 'Merge request Release Notes section';
-    const mrDescription = danger.gitlab.mr.description;
-    const wiki_link = `${process.env.DANGER_GITLAB_HOST}/espressif/esp-idf/-/wikis/rfc/How-to-write-release-notes-properly`;
-
-    const regexSectionReleaseNotes = /## Release notes([\s\S]*?)(?=## |$)/;
-    const regexValidEntry = /^\s*[-*+]\s+.+/;
-    const regexNoReleaseNotes = /no release note/i;
-
-    const sectionReleaseNotes = mrDescription.match(regexSectionReleaseNotes);
-    if (!sectionReleaseNotes) {
-        recordRuleExitStatus(ruleName, "Failed");
-        return warn(`The \`Release Notes\` section seems to be missing. Please check if the section header in MR description is present and in the correct markdown format ("## Release Notes").\n\nSee [Release Notes Format Rules](${wiki_link}).`);
-    }
-
-    const releaseNotesLines = sectionReleaseNotes[1].replace(/<!--[\s\S]*?-->/g, '')
-
-    const lines = releaseNotesLines.split("\n").filter(s => s.trim().length > 0);
-    let valid_entries_found = 0;
-    let no_release_notes_found = false;
-    let violations = [];
-
-    lines.forEach((line) => {
-        if (line.match(regexValidEntry)) {
-            valid_entries_found++;
-            const error_msg = check_entry(line);
-            if (error_msg) {
-                violations.push(error_msg);
-            }
-        } else if (line.match(regexNoReleaseNotes)) {
-            no_release_notes_found = true;
-        }
-    });
-
-    let error_output = [];
-    if (violations.length > 0) {
-        error_output = [...error_output, 'Invalid release note entries:', violations.join('\n')];
-    }
-    if (no_release_notes_found) {
-        if (valid_entries_found > 0) {
-            error_output.push('`No release notes` comment shows up when there is valid entry. Remove bullets before comments in release notes section.');
-        }
-    } else {
-        if (!valid_entries_found) {
-            error_output.push('The `Release Notes` section seems to have no valid entries. Add bullets before valid entries, or add `No release notes` comment to suppress this error if you mean to have no release notes.');
-        }
-    }
-
-    if (error_output.length > 0) {
-        // Paragraphs joined by double `\n`s.
-        error_output = [...error_output, `See [Release Notes Format Guide](${wiki_link}).`].join('\n\n');
-        recordRuleExitStatus(ruleName, "Failed");
-        return warn(error_output);
-    }
-
-    // At this point, the rule has passed
-	recordRuleExitStatus(ruleName, 'Passed');
-};
-
-function check_entry(entry) {
-    const entry_str = `- \`${entry}\``;
-    const indent = "  ";
-
-    if (entry.match(/no\s+release\s+note/i)) {
-        return [entry_str, `${indent}- \`No release notes\` comment shouldn't start with bullet.`].join('\n');
-    }
-
-    // Remove a leading escaping backslash of the special characters, https://www.markdownguide.org/basic-syntax/#characters-you-can-escape
-    const escapeCharRegex = /\\([\\`*_{}[\]<>()+#-.!|])/g;
-    entry = entry.replace(escapeCharRegex, '$1');
-
-    const regex = /^(\s*)[-*+]\s+\[([^\]]+)\]\s+(.*)$/;
-    const match = regex.exec(entry);
-    if (!match) {
-        return [entry_str, `${indent}- Please specify the [area] to which the change belongs (see guide). If this line is just a comment, remove the bullet.`].join('\n');
-    }
-
-    // area is in match[2]
-    const description = match[3].trim();
-    let violations = [];
-
-    if (match[1]) {
-        violations.push(`${indent}- Release note entry should start from the beginning of line. (Nested release note not allowed.)`);
-    }
-
-    if (!/^[A-Z0-9]/.test(description)) {
-        violations.push(`${indent}- Release note statement should start with a capital letter or digit.`);
-    }
-
-    if (violations.length > 0) {
-        return [entry_str, ...violations].join('\n');
-    }
-    return null;
-}

.gitlab/dangerjs/mrDocsTranslation.js

@@ -1,280 +0,0 @@
-const { recordRuleExitStatus } = require("./configParameters.js");
-
-/**
- * Check the documentation files in this MR.
- *
- * Generate an object with all docs/ files found in this MR with paths to their EN/CN versions.
- *
- * For common files (both language versions exist in this MR), compare the lines of both files.
- * Ignore if the CN file is only a single line file with an "include" reference to the EN version.
- *
- * For files that only have a CN version in this MR, add a message to the message that an EN file also needs to be created.
- *
- * For a file that only has an EN version in this MR, try loading its CN version from the target Gitlab branch.
- * If its CN version doesn't exist in the repository or it does exist,
- * but its contents are larger than just an "include" link to the EN version (it's a full-size file),
- * add a message to the report
- *
- * Create a compiled report with the docs/ files issues found and set its severity (WARN/INFO).
- * Severity is based on the presence of "needs translation: ??" labels in this MR
- *
- * @dangerjs WARN (if docs translation issues in the MR)
- * @dangerjs INFO (if docs translation issues in the MR and the user has already added translation labels).
- * Adding translation labels "needs translation: XX" automatically notifies the Documentation team
- *
- * @dangerjs WARN (if there are no docs issues in MR, but translation labels have been added anyway)
- *
- */
-module.exports = async function () {
-    const ruleName = 'Documentation translation';
-    let partMessages = []; // Create a blank field for future records of individual issues
-    const pathProject = "espressif/esp-idf";
-    const regexIncludeLink = /\.\.\sinclude::\s((\.\.\/)+)en\//;
-    const allMrFiles = [
-        ...danger.git.modified_files,
-        ...danger.git.created_files,
-        ...danger.git.deleted_files,
-    ];
-
-    const docsFilesMR = parseMrDocsFiles(allMrFiles); // Create single object of all doc files in MR with names, paths and groups
-
-    // Both versions (EN and CN) of document found changed in this MR
-    for (const file of docsFilesMR.bothFilesInMr) {
-        file.contentEn = await getContentFileInMR(file.fileEnPath); // Get content of English file
-        file.linesEn = file.contentEn.split("\n").length; // Get number of lines of English file
-
-        file.contentCn = await getContentFileInMR(file.fileCnPath); // Get content of Chinese file
-        file.linesCn = file.contentCn.split("\n").length; // Get number of lines of English file
-
-        // Compare number of lines in both versions
-        if (file.linesEn !== file.linesCn) {
-            // Check if CN file is only link to EN file
-            if (!regexIncludeLink.test(file.contentCn)) {
-                // if not just a link ...
-                partMessages.push(
-                    `- please synchronize the EN and CN version of \`${file.fileName}\`. [\`${file.fileEnPath}\`](${file.fileUrlRepoEN}) has ${file.linesEn} lines; [\`${file.fileCnPath}\`](${file.fileUrlRepoCN}) has ${file.linesCn} lines.`
-                );
-            }
-        }
-    }
-
-    // Only Chinese version of document found changed in this MR
-    for (const file of docsFilesMR.onlyCnFilesInMr) {
-        partMessages.push(
-            `- file \`${file.fileEnPath}\` doesn't exist in this MR or in the GitLab repo. Please add \`${file.fileEnPath}\` into this MR.`
-        );
-    }
-
-    // Only English version of document found in this MR
-    for (const file of docsFilesMR.onlyEnFilesInMr) {
-        const targetBranch = danger.gitlab.mr.target_branch;
-        file.contentCn = await getContentFileInGitlab(
-            file.fileCnPath,
-            targetBranch
-        ); // Try to fetch CN file from target branch of Gitlab repository and store content
-
-        if (file.contentCn) {
-            // File found on target branch in Gitlab repository
-            if (!regexIncludeLink.test(file.contentCn)) {
-                // File on Gitlab master is NOT just an ..include:: link to ENG version
-                file.fileUrlRepoMasterCN = `${process.env.DANGER_GITLAB_HOST}/${pathProject}/-/blob/${targetBranch}/${file.fileCnPath}`;
-                partMessages.push(
-                    `- file \`${file.fileCnPath}\` was not updated in this MR, but found unchanged full document (not just link to EN) in target branch of Gitlab repository [\`${file.fileCnPath}\`](${file.fileUrlRepoMasterCN}). Please update \`${file.fileCnPath}\` into this MR.`
-                );
-            }
-        } else {
-            // File failed to fetch, probably does not exist in the target branch
-            partMessages.push(
-                `- file \`${file.fileCnPath}\` probably doesn't exist in this MR or in the GitLab repo. Please add \`${file.fileCnPath}\` into this MR.`
-            );
-        }
-    }
-
-    // Create a report with found issues with documents in MR
-    createReport();
-
-    // At this point, the rule has passed
-	recordRuleExitStatus(ruleName, 'Passed');
-
-    /**
-     * Generates an object that represents the relationships between files in two different languages found in this MR.
-     *
-     * @param {string[]} docsFilesEN - An array of file paths for documents in English.
-     * @param {string[]} docsFilesCN - An array of file paths for documents in Chinese.
-     * @returns {Object} An object with the following properties:
-     * - bothFilesInMr: An array of objects that represent files that found in MR in both languages. Each object has the following properties:
-     *   - fileName: The name of the file.
-     *   - fileEnPath: The path to the file in English.
-     *   - fileCnPath: The path to the file in Chinese.
-     *   - fileUrlRepoEN: The URL link to MR branch path to the file in English.
-     *   - fileUrlRepoCN: The URL link to MR branch path to the file in Chinese.
-     * - onlyCnFilesInMr: An array of objects that represent files that only found in MR in English. Each object has the following properties:
-     *   - fileName: The name of the file.
-     *   - fileEnPath: The path to the file in English.
-     * 	 - fileCnPath: The FUTURE path to the file in Chinese.
-     *   - fileUrlRepoEN: The URL link to MR branch path to the file in English.
-     *   - fileUrlRepoCN: The URL link to MR branch path to the file in Chinese.
-     * - onlyEnFilesInMr: An array of objects that represent files that only found in MR in Chinese. Each object has the following properties:
-     *   - fileName: The name of the file.
-     *   - fileEnPath: The FUTURE path to the file in English.
-     *   - fileCnPath: The path to the file in Chinese.
-     *   - fileUrlRepoEN: The URL link to MR branch path to the file in English.
-     *   - fileUrlRepoCN: The URL link to MR branch path to the file in Chinese.
-     */
-    function parseMrDocsFiles(allMrFiles) {
-        const path = require("path");
-        const mrBranch = danger.gitlab.mr.source_branch;
-
-        const docsEnFilesMrPath = allMrFiles.filter((file) =>
-            file.startsWith("docs/en")
-        ); // Filter all English doc files in MR
-        const docsCnFilesMrPath = allMrFiles.filter((file) =>
-            file.startsWith("docs/zh_CN")
-        ); // Filter all Chinese doc files in MR
-
-        const docsEnFileNames = docsEnFilesMrPath.map((filePath) =>
-            path.basename(filePath)
-        ); // Get (base) file names for English docs
-        const docsCnFileNames = docsCnFilesMrPath.map((filePath) =>
-            path.basename(filePath)
-        ); // Get (base) file names for Chinese docs
-
-        const bothFileNames = docsEnFileNames.filter((fileName) =>
-            docsCnFileNames.includes(fileName)
-        ); // Get file names that are common to both English and Chinese docs
-        const onlyEnFileNames = docsEnFileNames.filter(
-            (fileName) => !docsCnFileNames.includes(fileName)
-        ); // Get file names that are only present in English version
-        const onlyCnFileNames = docsCnFileNames.filter(
-            (fileName) => !docsEnFileNames.includes(fileName)
-        ); // Get file names that are only present in Chinese version
-
-        return {
-            bothFilesInMr: bothFileNames.map((fileName) => {
-                const fileEnPath =
-                    docsEnFilesMrPath[docsEnFileNames.indexOf(fileName)];
-                const fileCnPath =
-                    docsCnFilesMrPath[docsCnFileNames.indexOf(fileName)];
-
-                return {
-                    fileName,
-                    fileEnPath,
-                    fileCnPath,
-                    fileUrlRepoEN: `${process.env.DANGER_GITLAB_HOST}/${pathProject}/-/blob/${mrBranch}/${fileEnPath}`,
-                    fileUrlRepoCN: `${process.env.DANGER_GITLAB_HOST}/${pathProject}/-/blob/${mrBranch}/${fileCnPath}`,
-                };
-            }),
-            onlyEnFilesInMr: onlyEnFileNames.map((fileName) => {
-                const fileEnPath =
-                    docsEnFilesMrPath[docsEnFileNames.indexOf(fileName)];
-                const fileCnPath = fileEnPath.replace("en", "zh_CN"); // Generate future CN file path
-
-                return {
-                    fileName,
-                    fileEnPath,
-                    fileCnPath,
-                    fileUrlRepoEN: `${process.env.DANGER_GITLAB_HOST}/${pathProject}/-/blob/${mrBranch}/${fileEnPath}`,
-                    fileUrlRepoCN: `${process.env.DANGER_GITLAB_HOST}/${pathProject}/-/blob/${mrBranch}/${fileCnPath}`,
-                };
-            }),
-            onlyCnFilesInMr: onlyCnFileNames.map((fileName) => {
-                const fileCnPath =
-                    docsCnFilesMrPath[docsCnFileNames.indexOf(fileName)];
-                const fileEnPath = fileCnPath.replace("zh_CN", "en"); // Generate future EN file path
-
-                return {
-                    fileName,
-                    fileEnPath,
-                    fileCnPath,
-                    fileUrlRepoEN: `${process.env.DANGER_GITLAB_HOST}/${pathProject}/-/blob/${mrBranch}/${fileEnPath}`,
-                    fileUrlRepoCN: `${process.env.DANGER_GITLAB_HOST}/${pathProject}/-/blob/${mrBranch}/${fileCnPath}`,
-                };
-            }),
-        };
-    }
-
-    /**
-     * Retrieves the contents of a file from GitLab using the GitLab API.
-     *
-     * @param {string} filePath - The path of the file to retrieve.
-     * @param {string} branch - The branch where the file is located.
-     * @returns {string|null} - The contents of the file, with any trailing new lines trimmed, or null if the file cannot be retrieved.
-     */
-    async function getContentFileInGitlab(filePath, branch) {
-        const axios = require("axios");
-
-        const encFilePath = encodeURIComponent(filePath);
-        const encBranch = encodeURIComponent(branch);
-        const urlApi = `${process.env.DANGER_GITLAB_API_BASE_URL}/projects/${danger.gitlab.mr.project_id}/repository/files/${encFilePath}/raw?ref=${encBranch}`;
-
-        try {
-            const response = await axios.get(urlApi, {
-                headers: {
-                    "Private-Token": process.env.DANGER_GITLAB_API_TOKEN,
-                },
-            });
-            return response.data.trim(); // Trim trailing  new line
-        } catch (error) {
-            return null;
-        }
-    }
-
-    /**
-     * Retrieves the contents of a file in a DangerJS merge request object.
-     *
-     * @param {string} filePath - The path of the file to retrieve.
-     * @returns {string|null} - The contents of the file, with any trailing new lines trimmed, or null if the file cannot be retrieved.
-     */
-    async function getContentFileInMR(filePath) {
-        try {
-            const content = await danger.git.diffForFile(filePath);
-            const fileContentAfter = content.after.trim(); // Trim trailing new lines
-            return fileContentAfter;
-        } catch (error) {
-            console.error(`Error while getting file content MR: ${error}`);
-            return null;
-        }
-    }
-
-    /**
-     * Creates a compiled report for found documentation issues in the current MR and alerts the Documentation team if there are any "needs translation" labels present.
-     *
-     * Report if documentation labels have been added by mistake.
-     */
-    function createReport() {
-        const mrLabels = danger.gitlab.mr.labels; // Get MR labels
-        const regexTranslationLabel = /needs translation:/i;
-
-        const translationLabelsPresent = mrLabels.some((label) =>
-            regexTranslationLabel.test(label)
-        ); // Check if any of MR labels are "needs translation: XX"
-
-        // No docs issues found in MR, but translation labels have been added anyway
-        if (!partMessages.length && translationLabelsPresent) {
-            recordRuleExitStatus(ruleName, "Failed");
-            return warn(
-                `Please remove the \`needs translation: XX\` labels. For documents that need to translate from scratch, Doc team will translate them in the future. For the current stage, we only focus on updating exiting EN and CN translation to make them in sync.`
-            );
-        }
-
-        // Docs issues found in this MR
-        partMessages.sort();
-        let dangerMessage = `Some of the documentation files in this MR seem to have translations issues:\n${partMessages.join(
-            "\n"
-        )}\n`;
-
-        if (partMessages.length) {
-            if (!translationLabelsPresent) {
-                dangerMessage += `
-				\nWhen synchronizing the EN and CN versions, please follow the [Documentation Code](https://docs.espressif.com/projects/esp-idf/zh_CN/latest/esp32/contribute/documenting-code.html#standardize-document-format). The total number of lines of EN and CN should be same.\n
-				\nIf you have difficulty in providing translation, you can contact Documentation team by adding <kbd>needs translation: CN</kbd> or <kbd>needs translation: EN</kbd> labels into this MR and retrying Danger CI job. The documentation team will be automatically notified and will help you with the translations before the merge.\n`;
-                recordRuleExitStatus(ruleName, "Failed");
-                return warn(dangerMessage); // no "needs translation: XX" labels in MR; report issues as warn
-            } else {
-				dangerMessage += `\nTranslation labels <kbd>needs translation: CN</kbd> or <kbd>needs translation: EN</kbd> were added - this will automatically notify the Documentation team to help you with translation issues.`;
-                recordRuleExitStatus(ruleName, 'Passed (with suggestions)');
-                return message(dangerMessage); // "needs translation: XX" labels were found in MR and Docs team was notified; report issues as info
-            }
-        }
-    }
-};

.gitlab/dangerjs/mrSizeTooLarge.js

@@ -1,22 +0,0 @@
-const { recordRuleExitStatus } = require("./configParameters.js");
-
-/**
- * Check if MR is too large (more than 1000 lines of changes)
- *
- * @dangerjs INFO
- */
-module.exports = async function () {
-    const ruleName = "Merge request size (number of changed lines)";
-    const bigMrLinesOfCodeThreshold = 1000;
-    const totalLines = await danger.git.linesOfCode();
-
-    if (totalLines > bigMrLinesOfCodeThreshold) {
-        recordRuleExitStatus(ruleName, "Passed (with suggestions)");
-        return message(
-            `This MR seems to be quite large (total lines of code: ${totalLines}), you might consider splitting it into smaller MRs`
-        );
-    }
-
-    // At this point, the rule has passed
-    recordRuleExitStatus(ruleName, "Passed");
-};

.gitlab/dangerjs/mrSourceBranchName.js

@@ -1,31 +0,0 @@
-const { recordRuleExitStatus } = require("./configParameters.js");
-
-/**
- * Throw Danger WARN if branch name contains more than one slash or uppercase letters
- *
- * @dangerjs INFO
- */
-module.exports = function () {
-    const ruleName = "Source branch name";
-    const sourceBranch = danger.gitlab.mr.source_branch;
-
-    // Check if the source branch name contains more than one slash
-    const slashCount = (sourceBranch.match(/\//g) || []).length;
-    if (slashCount > 1) {
-        recordRuleExitStatus(ruleName, "Failed");
-        return warn(
-            `The source branch name \`${sourceBranch}\` contains more than one slash. This can cause troubles with git sync. Please rename the branch.`
-        );
-    }
-
-    // Check if the source branch name contains any uppercase letters
-    if (sourceBranch !== sourceBranch.toLowerCase()) {
-        recordRuleExitStatus(ruleName, "Failed");
-        return warn(
-            `The source branch name \`${sourceBranch}\` contains uppercase letters. This can cause troubles on case-insensitive file systems (macOS). Please use only lowercase letters.`
-        );
-    }
-
-    // At this point, the rule has passed
-    recordRuleExitStatus(ruleName, "Passed");
-};

.gitlab/dangerjs/mrTitleNoDraftOrWip.js

@@ -1,31 +0,0 @@
-const { recordRuleExitStatus } = require("./configParameters.js");
-
-/**
- * Check if MR Title contains prefix "WIP: ...".
- *
- * @dangerjs WARN
- */
-module.exports = function () {
-    const ruleName = 'Merge request not in Draft or WIP state';
-    const mrTitle = danger.gitlab.mr.title;
-    const regexes = [
-        { prefix: "WIP", regex: /^WIP:/i },
-        { prefix: "W.I.P", regex: /^W\.I\.P/i },
-        { prefix: "[WIP]", regex: /^\[WIP/i },
-        { prefix: "[W.I.P]", regex: /^\[W\.I\.P/i },
-        { prefix: "(WIP)", regex: /^\(WIP/i },
-        { prefix: "(W.I.P)", regex: /^\(W\.I\.P/i },
-    ];
-
-    for (const item of regexes) {
-        if (item.regex.test(mrTitle)) {
-            recordRuleExitStatus(ruleName, "Failed");
-            return warn(
-                `Please remove the \`${item.prefix}\` prefix from the MR name before merging this MR.`
-            );
-        }
-    }
-
-    // At this point, the rule has passed
-    recordRuleExitStatus(ruleName, "Passed");
-};

.gitlab/dangerjs/package.json

@@ -1,12 +0,0 @@
-{
-    "name": "dangerjs-esp-idf",
-    "description": "Merge request automatic linter",
-    "main": "dangerfile.js",
-    "dependencies": {
-        "danger": "^11.2.3",
-        "axios": "^1.3.3",
-        "langchain": "^0.0.53",
-        "openai-gpt-token-counter": "^1.0.3",
-        "@commitlint/lint": "^13.1.0"
-    }
-}

.gitlab/merge_request_templates/Minimal_Template.md

@@ -13,3 +13,20 @@
 <!-- Either state release notes or write "No release notes" -->
 
 <!-- ## Breaking change notes --><!-- Optional -->
+
+<!-- ## Dynamic Pipeline Configuration
+```yaml
+Test Case Filters:
+    # Only run tests that match the given substring expression (modified files/components will be ignored):
+    # Please use a list of strings. 
+    # This will run the test cases filtered like `pytest -k "(<list_item_1>) or (<list_item_2>) or ...`
+    # The fast pipeline will fail at the final stage.
+    # For example:
+      - test_sdm and not sdmmc
+      - test_hello_world
+    # This example will include all tests containing 'test_hello_world' in the name,
+    # and include all tests containing 'test_sdm' but not 'sdmmc' in the name.
+``` --><!-- Optional -->
+
+<!-- Don't remove the next line - assigns the MR author as the assignee -->
+/assign me

.gitlab/merge_request_templates/Mixed Template.md

@@ -10,8 +10,7 @@ _This entire section can be deleted if all items are checked._
 * [ ] All related links, including JIRA, backport, submodule MR, are mentioned in the `Related` subsection.
 * [ ] Any GitHub issues are linked inside the git commit message and corresponding release notes
 * [ ] Add label for the area this MR is part of
-* [ ] For documentation updates, check if label `Docs` and `needs translation:CN` or `needs translation:EN`  have been added when the other language version still needs the update. Skip adding the label if the document is not yet translated.
-* [ ] Check if documents requiring translation fall under get-started section. If yes, add the labels mentioned above. Then the documentation team will assign a translator for you. Please inform the translator to prepare translation once your MR is ready to merge. The translation should be included in your MR to get it merged. For more information, see documentation workflow in Wiki.
+* [ ] For documentation updates, check if label `needs translation:CN` or `needs translation:EN` have been added when the other language version still needs the update. Don't add such labels if the document updated has never been translated before and requires translation from scratch.
 * [ ] Any necessary "needs backport" labels are added
 * [ ] Check if this is a breaking change. If it is, add notes to the `Breaking change notes` subsection below
 * [ ] Release note entry if this is a new public feature, or a fix for an issue introduced in the previous release.
@@ -42,7 +41,7 @@ _For other small/non-public changes, which are not expected to be in the release
 
 _Don't touch the subsection titles below, they will be parsed by scripts._
 
-## Release notes (Mandatory)
+## Release notes <!-- Mandatory -->
 
 _Changes made in this MR that should go into the **Release Notes** should be listed here. Please use **past tense** and *specify the area (see maintainers page of IDF internal wiki)*. If there is a subscope, include it and separate with slash (`/`). Minor changes can go to the descriptions above without a release notes entry._
 
@@ -61,3 +60,6 @@ _If there are any breaking changes, please mention it here. Talking about (1) wh
 _Please strictly follow the breaking change restriction, which means, if there is a breaking change but you are merging to non-major versions, you have to separate the breaking part out to another MR for a major version. The breaking change subsection is only accepted in MRs merging to major versions._
 
 * [VFS/UART] Now vfs_uart_set_rts_cts accept one more instance argument, to support configuration to different ports.
+
+<!-- Don't remove the next line - assigns the MR author as the assignee -->
+/assign me

.gitmodules

@@ -49,12 +49,13 @@
 [submodule "components/json/cJSON"]
 	path = components/json/cJSON
 	url = ../../DaveGamble/cJSON.git
-	sbom-version = 1.7.16
+	sbom-version = 1.7.18
 	sbom-cpe = cpe:2.3:a:cjson_project:cjson:{}:*:*:*:*:*:*:*
 	sbom-supplier = Person: Dave Gamble
 	sbom-url = https://github.com/DaveGamble/cJSON
 	sbom-description = Ultralightweight JSON parser in ANSI C
-	sbom-hash = cb8693b058ba302f4829ec6d03f609ac6f848546
+	sbom-hash = acc76239bee01d8e9c858ae2cab296704e52d916
+	sbom-cve-exclude-list = CVE-2024-31755 Resolved in v1.7.18
 
 [submodule "components/mbedtls/mbedtls"]
 	path = components/mbedtls/mbedtls
@@ -81,11 +82,11 @@
 [submodule "components/unity/unity"]
 	path = components/unity/unity
 	url = ../../ThrowTheSwitch/Unity.git
-	sbom-version = v2.4.3-51-g7d2bf62b7e6a
+	sbom-version = v2.6.0-RC1
 	sbom-supplier = Organization: ThrowTheSwitch community <http://www.throwtheswitch.org>
 	sbom-url = https://github.com/ThrowTheSwitch/Unity
 	sbom-description = Simple Unit Testing for C
-	sbom-hash = 7d2bf62b7e6afaf38153041a9d53c21aeeca9a25
+	sbom-hash = bf560290f6020737eafaa8b5cbd2177c3956c03f
 
 [submodule "components/bt/host/nimble/nimble"]
 	path = components/bt/host/nimble/nimble
@@ -120,10 +121,6 @@
 	path = components/openthread/lib
 	url = ../../espressif/esp-thread-lib.git
 
-[submodule "components/ieee802154/lib"]
-	path = components/ieee802154/lib
-	url = ../../espressif/esp-ieee802154-lib.git
-
 [submodule "components/bt/controller/lib_esp32h2/esp32h2-bt-lib"]
 	path = components/bt/controller/lib_esp32h2/esp32h2-bt-lib
 	url = ../../espressif/esp32h2-bt-lib.git
@@ -136,6 +133,10 @@
 	path = components/bt/controller/lib_esp32c6/esp32c6-bt-lib
 	url = ../../espressif/esp32c6-bt-lib.git
 
+[submodule "components/bt/controller/lib_esp32c5/esp32c5-bt-lib"]
+	path = components/bt/controller/lib_esp32c5/esp32c5-bt-lib
+	url = ../../espressif/esp32c5-bt-lib.git
+
 [submodule "components/heap/tlsf"]
 	path = components/heap/tlsf
 	url = ../../espressif/tlsf.git
@@ -143,3 +144,7 @@
 [submodule "components/esp_coex/lib"]
 	path = components/esp_coex/lib
 	url = ../../espressif/esp-coex-lib.git
+
+[submodule "components/bt/esp_ble_mesh/lib/lib"]
+	path = components/bt/esp_ble_mesh/lib/lib
+	url = ../../espressif/esp-ble-mesh-lib.git

.pre-commit-config.yaml

@@ -1,9 +1,37 @@
 # See https://pre-commit.com for more information
 # See https://pre-commit.com/hooks.html for more hooks
 
+default_stages: [pre-commit]
+
 repos:
+  - repo: https://github.com/astral-sh/ruff-pre-commit
+    rev: "v0.9.7"
+    hooks:
+      - id: ruff-format
+      - id: ruff
+        args: [ "--fix" ]
+  - repo: local
+    hooks:
+      - id: pytest-linter
+        name: Pytest Linter Check
+        entry: tools/ci/check_test_files.py
+        language: python
+        files: 'pytest_.*\.py$'
+        require_serial: true
+        additional_dependencies:
+          - pytest-embedded-idf[serial]~=1.16
+          - pytest-embedded-jtag~=1.16
+          - pytest-embedded-qemu~=1.16
+          - pytest-ignore-test-results~=0.3
+          - pytest-rerunfailures
+          - pytest-timeout
+          - idf-build-apps~=2.8
+          - python-gitlab
+          - minio
+          - click
+          - esp-idf-monitor
   - repo: https://github.com/pre-commit/pre-commit-hooks
-    rev: v4.0.1
+    rev: v4.5.0
     hooks:
       - id: trailing-whitespace
         # note: whitespace exclusions use multiline regex, see https://pre-commit.com/#regular-expressions
@@ -12,6 +40,7 @@ repos:
         # 2 - any file matching *test*/*expected* (for host tests, if possible use this naming pattern always)
         # 3 - any directory named 'testdata'
         # 4 - protobuf auto-generated files
+        # 5 - COPYING files
         exclude: &whitespace_excludes |
           (?x)^(
             .+\.(md|rst|map|bin)|
@@ -20,7 +49,10 @@ repos:
             .*_pb2.py|
             .*.pb-c.h|
             .*.pb-c.c|
-            .*.yuv
+            .*.yuv|
+            .*.rgb|
+            .*COPYING.*|
+            docs/sphinx-known-warnings\.txt
           )$
       - id: end-of-file-fixer
         exclude: *whitespace_excludes
@@ -34,20 +66,10 @@ repos:
       - id: no-commit-to-branch
         name: Do not use uppercase letters in the branch name
         args: ['--pattern', '^[^A-Z]*[A-Z]']
-  - repo: https://github.com/PyCQA/flake8
-    rev: 5.0.4
+  - repo: https://github.com/codespell-project/codespell
+    rev: v2.3.0
     hooks:
-      - id: flake8
-        args: ['--config=.flake8', '--tee', '--benchmark']
-  - repo: https://github.com/pycqa/isort
-    rev: 5.12.0  # python 3.8 compatible
-    hooks:
-      - id: isort
-        name: isort (python)
-        exclude: >
-          (?x)^(
-              .*_pb2.py
-          )$
+      - id: codespell
   - repo: local
     hooks:
       - id: check-executables
@@ -62,18 +84,6 @@ repos:
         language: python
         pass_filenames: false
         always_run: true
-      - id: check-kconfigs
-        name: Validate Kconfig files
-        entry: tools/ci/check_kconfigs.py
-        language: python
-        additional_dependencies:
-          - esp-idf-kconfig
-        files: '^Kconfig$|Kconfig.*$'
-      - id: check-deprecated-kconfigs-options
-        name: Check if any Kconfig Options Deprecated
-        entry: tools/ci/check_deprecated_kconfigs.py
-        language: python
-        files: 'sdkconfig\.ci$|sdkconfig\.rename$|sdkconfig.*$'
       - id: cmake-lint
         name: Check CMake Files Format
         entry: cmakelint --linelength=120 --spaces=4 --filter=-whitespace/indent
@@ -89,30 +99,24 @@ repos:
         always_run: true
         files: '\.gitlab/CODEOWNERS'
         pass_filenames: false
-      - id: check-rules-yml
-        name: Check rules.yml all rules have at lease one job applied, all rules needed exist
-        entry: tools/ci/check_rules_yml.py
-        language: python
-        files: '\.gitlab/ci/.+\.yml|\.gitlab-ci.yml|\.gitmodules'
-        pass_filenames: false
-        additional_dependencies:
-          - PyYAML == 5.3.1
       - id: check-generated-rules
         name: Check rules are generated (based on .gitlab/ci/dependencies/dependencies.yml)
         entry: tools/ci/generate_rules.py
         language: python
-        files: '\.gitlab/ci/dependencies/.+|\.gitlab/ci/.*\.yml'
+        files: '\.gitlab/ci/dependencies/.+|\.gitlab/ci/.*\.yml|.gitlab-ci.yml'
         pass_filenames: false
+        require_serial: true
         additional_dependencies:
           - PyYAML == 5.3.1
       - id: mypy-check
         name: Check type annotations in python files
         entry: tools/ci/check_type_comments.py
         additional_dependencies:
-          - 'mypy==0.940'
-          - 'mypy-extensions==0.4.3'
-          - 'types-setuptools==57.4.14'
-          - 'types-PyYAML==0.1.9'
+          - 'mypy'
+          - 'mypy-extensions'
+          - 'types-setuptools'
+          - 'types-PyYAML'
+          - 'types-requests'
         exclude: >
           (?x)^(
               .*_pb2.py
@@ -159,14 +163,20 @@ repos:
         require_serial: true
         additional_dependencies:
           - PyYAML == 5.3.1
-          - idf_build_apps~=1.0
-      - id: sort-build-test-rules-ymls
-        name: sort .build-test-rules.yml files
-        entry: tools/ci/check_build_test_rules.py sort-yaml
+          - idf-build-apps>=2.8,<3
+      - id: sort-yaml-files
+        name: sort yaml files
+        entry: tools/ci/sort_yaml.py
         language: python
-        files: '\.build-test-rules\.yml'
+        files: '\.build-test-rules\.yml$|known_generate_test_child_pipeline_warnings\.yml$'
+        additional_dependencies:
+          - ruamel.yaml
+      - id: sort-yaml-test
+        name: sort yaml test
+        entry: python -m unittest tools/ci/sort_yaml.py
+        language: python
+        files: 'tools/ci/sort_yaml\.py$'
         additional_dependencies:
-          - PyYAML == 5.3.1
           - ruamel.yaml
       - id: check-build-test-rules-path-exists
         name: check path in .build-test-rules.yml exists
@@ -177,35 +187,37 @@ repos:
         always_run: true
         pass_filenames: false
         require_serial: true
-      - id: submodule-sbom-hash-check
-        name: Check if sbom-hash values for submodules in .gitmodules match submodules checkout hash in git tree
-        entry: python tools/test_sbom/test_submodules.py
-        language: python
-        always_run: true
-        pass_filenames: false
       - id: cleanup-ignore-lists
         name: Remove non-existing patterns from ignore lists
         entry: tools/ci/cleanup_ignore_lists.py
         language: python
         always_run: true
         require_serial: true
+      - id: gitlab-yaml-linter
+        name: Check gitlab yaml files
+        entry: tools/ci/gitlab_yaml_linter.py
+        language: python
+        files: '\.gitlab-ci\.yml|\.gitlab/ci/.+\.yml|\.gitmodules'
+        pass_filenames: false
+        additional_dependencies:
+          - PyYAML == 5.3.1
   - repo: https://github.com/pre-commit/pre-commit-hooks
     rev: v4.0.1
     hooks:
       - id: file-contents-sorter
         files: 'tools\/ci\/(executable-list\.txt|mypy_ignore_list\.txt|check_copyright_ignore\.txt)'
   - repo: https://github.com/espressif/check-copyright/
-    rev: v1.0.3
+    rev: v1.1.1
     hooks:
       - id: check-copyright
         args: ['--ignore', 'tools/ci/check_copyright_ignore.txt', '--config', 'tools/ci/check_copyright_config.yaml']
   - repo: https://github.com/espressif/conventional-precommit-linter
-    rev: v1.2.1
+    rev: v1.7.0
     hooks:
       - id: conventional-precommit-linter
         stages: [commit-msg]
   - repo: https://github.com/espressif/astyle_py.git
-    rev: v1.0.2
+    rev: v1.0.5
     hooks:
       - id: astyle_py
         # If you are modifying astyle version, update tools/format.sh as well
@@ -221,3 +233,24 @@ repos:
       name: shellcheck dash (export.sh)
       args: ['--shell', 'dash', '-x']
       files: 'export.sh'
+  - repo: https://github.com/espressif/esp-pwsh-check
+    rev: v1.0.1
+    hooks:
+    - id: check-powershell-scripts
+      stages: [manual]
+  - repo: https://github.com/espressif/esp-idf-sbom.git
+    rev: v0.13.0
+    hooks:
+      - id: validate-sbom-manifest
+        stages: [post-commit]
+  - repo: https://github.com/sphinx-contrib/sphinx-lint
+    rev: v0.9.1
+    hooks:
+      - id: 'sphinx-lint'
+        name: Lint rST files in docs folder using Sphinx Lint
+        files: ^(docs/en|docs/zh_CN)/.*\.(rst|inc)$
+  - repo: https://github.com/espressif/esp-idf-kconfig.git
+    rev: v2.5.0
+    hooks:
+      - id: check-kconfig-files
+      - id: check-deprecated-kconfig-options

.pylintrc

@@ -1,641 +0,0 @@
-[MAIN]
-
-# Analyse import fallback blocks. This can be used to support both Python 2 and
-# 3 compatible code, which means that the block might have code that exists
-# only in one or another interpreter, leading to false positives when analysed.
-analyse-fallback-blocks=no
-
-# Clear in-memory caches upon conclusion of linting. Useful if running pylint
-# in a server-like mode.
-clear-cache-post-run=no
-
-# Load and enable all available extensions. Use --list-extensions to see a list
-# all available extensions.
-#enable-all-extensions=
-
-# In error mode, messages with a category besides ERROR or FATAL are
-# suppressed, and no reports are done by default. Error mode is compatible with
-# disabling specific errors.
-#errors-only=
-
-# Always return a 0 (non-error) status code, even if lint errors are found.
-# This is primarily useful in continuous integration scripts.
-#exit-zero=
-
-# A comma-separated list of package or module names from where C extensions may
-# be loaded. Extensions are loading into the active Python interpreter and may
-# run arbitrary code.
-extension-pkg-allow-list=
-
-# A comma-separated list of package or module names from where C extensions may
-# be loaded. Extensions are loading into the active Python interpreter and may
-# run arbitrary code. (This is an alternative name to extension-pkg-allow-list
-# for backward compatibility.)
-extension-pkg-whitelist=
-
-# Return non-zero exit code if any of these messages/categories are detected,
-# even if score is above --fail-under value. Syntax same as enable. Messages
-# specified are enabled, while categories only check already-enabled messages.
-fail-on=
-
-# Specify a score threshold under which the program will exit with error.
-fail-under=10
-
-# Interpret the stdin as a python script, whose filename needs to be passed as
-# the module_or_package argument.
-#from-stdin=
-
-# Files or directories to be skipped. They should be base names, not paths.
-ignore=CVS
-
-# Add files or directories matching the regular expressions patterns to the
-# ignore-list. The regex matches against paths and can be in Posix or Windows
-# format. Because '\\' represents the directory delimiter on Windows systems,
-# it can't be used as an escape character.
-ignore-paths=
-
-# Files or directories matching the regular expression patterns are skipped.
-# The regex matches against base names, not paths. The default value ignores
-# Emacs file locks
-ignore-patterns=^\.#
-
-# List of module names for which member attributes should not be checked
-# (useful for modules/projects where namespaces are manipulated during runtime
-# and thus existing member attributes cannot be deduced by static analysis). It
-# supports qualified module names, as well as Unix pattern matching.
-ignored-modules=
-
-# Python code to execute, usually for sys.path manipulation such as
-# pygtk.require().
-#init-hook=
-
-# Use multiple processes to speed up Pylint. Specifying 0 will auto-detect the
-# number of processors available to use, and will cap the count on Windows to
-# avoid hangs.
-jobs=1
-
-# Control the amount of potential inferred values when inferring a single
-# object. This can help the performance when dealing with large functions or
-# complex, nested conditions.
-limit-inference-results=100
-
-# List of plugins (as comma separated values of python module names) to load,
-# usually to register additional checkers.
-load-plugins=
-
-# Pickle collected data for later comparisons.
-persistent=yes
-
-# Minimum Python version to use for version dependent checks. Will default to
-# the version used to run pylint.
-py-version=3.8
-
-# Discover python modules and packages in the file system subtree.
-recursive=no
-
-# Add paths to the list of the source roots. Supports globbing patterns. The
-# source root is an absolute path or a path relative to the current working
-# directory used to determine a package namespace for modules located under the
-# source root.
-source-roots=
-
-# When enabled, pylint would attempt to guess common misconfiguration and emit
-# user-friendly hints instead of false-positive error messages.
-suggestion-mode=yes
-
-# Allow loading of arbitrary C extensions. Extensions are imported into the
-# active Python interpreter and may run arbitrary code.
-unsafe-load-any-extension=no
-
-# In verbose mode, extra non-checker-related info will be displayed.
-#verbose=
-
-
-[BASIC]
-
-# Naming style matching correct argument names.
-argument-naming-style=snake_case
-
-# Regular expression matching correct argument names. Overrides argument-
-# naming-style. If left empty, argument names will be checked with the set
-# naming style.
-#argument-rgx=
-
-# Naming style matching correct attribute names.
-attr-naming-style=snake_case
-
-# Regular expression matching correct attribute names. Overrides attr-naming-
-# style. If left empty, attribute names will be checked with the set naming
-# style.
-#attr-rgx=
-
-# Bad variable names which should always be refused, separated by a comma.
-bad-names=foo,
-          bar,
-          baz,
-          toto,
-          tutu,
-          tata
-
-# Bad variable names regexes, separated by a comma. If names match any regex,
-# they will always be refused
-bad-names-rgxs=
-
-# Naming style matching correct class attribute names.
-class-attribute-naming-style=any
-
-# Regular expression matching correct class attribute names. Overrides class-
-# attribute-naming-style. If left empty, class attribute names will be checked
-# with the set naming style.
-#class-attribute-rgx=
-
-# Naming style matching correct class constant names.
-class-const-naming-style=UPPER_CASE
-
-# Regular expression matching correct class constant names. Overrides class-
-# const-naming-style. If left empty, class constant names will be checked with
-# the set naming style.
-#class-const-rgx=
-
-# Naming style matching correct class names.
-class-naming-style=PascalCase
-
-# Regular expression matching correct class names. Overrides class-naming-
-# style. If left empty, class names will be checked with the set naming style.
-#class-rgx=
-
-# Naming style matching correct constant names.
-const-naming-style=UPPER_CASE
-
-# Regular expression matching correct constant names. Overrides const-naming-
-# style. If left empty, constant names will be checked with the set naming
-# style.
-#const-rgx=
-
-# Minimum line length for functions/classes that require docstrings, shorter
-# ones are exempt.
-docstring-min-length=-1
-
-# Naming style matching correct function names.
-function-naming-style=snake_case
-
-# Regular expression matching correct function names. Overrides function-
-# naming-style. If left empty, function names will be checked with the set
-# naming style.
-#function-rgx=
-
-# Good variable names which should always be accepted, separated by a comma.
-good-names=i,
-           j,
-           k,
-           ex,
-           Run,
-           _
-
-# Good variable names regexes, separated by a comma. If names match any regex,
-# they will always be accepted
-good-names-rgxs=
-
-# Include a hint for the correct naming format with invalid-name.
-include-naming-hint=no
-
-# Naming style matching correct inline iteration names.
-inlinevar-naming-style=any
-
-# Regular expression matching correct inline iteration names. Overrides
-# inlinevar-naming-style. If left empty, inline iteration names will be checked
-# with the set naming style.
-#inlinevar-rgx=
-
-# Naming style matching correct method names.
-method-naming-style=snake_case
-
-# Regular expression matching correct method names. Overrides method-naming-
-# style. If left empty, method names will be checked with the set naming style.
-#method-rgx=
-
-# Naming style matching correct module names.
-module-naming-style=snake_case
-
-# Regular expression matching correct module names. Overrides module-naming-
-# style. If left empty, module names will be checked with the set naming style.
-#module-rgx=
-
-# Colon-delimited sets of names that determine each other's naming style when
-# the name regexes allow several styles.
-name-group=
-
-# Regular expression which should only match function or class names that do
-# not require a docstring.
-no-docstring-rgx=^_
-
-# List of decorators that produce properties, such as abc.abstractproperty. Add
-# to this list to register other decorators that produce valid properties.
-# These decorators are taken in consideration only for invalid-name.
-property-classes=abc.abstractproperty
-
-# Regular expression matching correct type alias names. If left empty, type
-# alias names will be checked with the set naming style.
-#typealias-rgx=
-
-# Regular expression matching correct type variable names. If left empty, type
-# variable names will be checked with the set naming style.
-#typevar-rgx=
-
-# Naming style matching correct variable names.
-variable-naming-style=snake_case
-
-# Regular expression matching correct variable names. Overrides variable-
-# naming-style. If left empty, variable names will be checked with the set
-# naming style.
-#variable-rgx=
-
-
-[CLASSES]
-
-# Warn about protected attribute access inside special methods
-check-protected-access-in-special-methods=no
-
-# List of method names used to declare (i.e. assign) instance attributes.
-defining-attr-methods=__init__,
-                      __new__,
-                      setUp,
-                      asyncSetUp,
-                      __post_init__
-
-# List of member names, which should be excluded from the protected access
-# warning.
-exclude-protected=_asdict,_fields,_replace,_source,_make,os._exit
-
-# List of valid names for the first argument in a class method.
-valid-classmethod-first-arg=cls
-
-# List of valid names for the first argument in a metaclass class method.
-valid-metaclass-classmethod-first-arg=mcs
-
-
-[DESIGN]
-
-# List of regular expressions of class ancestor names to ignore when counting
-# public methods (see R0903)
-exclude-too-few-public-methods=
-
-# List of qualified class names to ignore when counting class parents (see
-# R0901)
-ignored-parents=
-
-# Maximum number of arguments for function / method.
-max-args=5
-
-# Maximum number of attributes for a class (see R0902).
-max-attributes=7
-
-# Maximum number of boolean expressions in an if statement (see R0916).
-max-bool-expr=5
-
-# Maximum number of branch for function / method body.
-max-branches=12
-
-# Maximum number of locals for function / method body.
-max-locals=15
-
-# Maximum number of parents for a class (see R0901).
-max-parents=7
-
-# Maximum number of public methods for a class (see R0904).
-max-public-methods=20
-
-# Maximum number of return / yield for function / method body.
-max-returns=6
-
-# Maximum number of statements in function / method body.
-max-statements=50
-
-# Minimum number of public methods for a class (see R0903).
-min-public-methods=2
-
-
-[EXCEPTIONS]
-
-# Exceptions that will emit a warning when caught.
-overgeneral-exceptions=builtins.BaseException,builtins.Exception
-
-
-[FORMAT]
-
-# Expected format of line ending, e.g. empty (any line ending), LF or CRLF.
-expected-line-ending-format=
-
-# Regexp for a line that is allowed to be longer than the limit.
-ignore-long-lines=^\s*(# )?<?https?://\S+>?$
-
-# Number of spaces of indent required inside a hanging or continued line.
-indent-after-paren=4
-
-# String used as indentation unit. This is usually "    " (4 spaces) or "\t" (1
-# tab).
-indent-string='    '
-
-# Maximum number of characters on a single line.
-max-line-length=160
-
-# Maximum number of lines in a module.
-max-module-lines=1000
-
-# Allow the body of a class to be on the same line as the declaration if body
-# contains single statement.
-single-line-class-stmt=no
-
-# Allow the body of an if to be on the same line as the test if there is no
-# else.
-single-line-if-stmt=no
-
-
-[IMPORTS]
-
-# List of modules that can be imported at any level, not just the top level
-# one.
-allow-any-import-level=
-
-# Allow explicit reexports by alias from a package __init__.
-allow-reexport-from-package=no
-
-# Allow wildcard imports from modules that define __all__.
-allow-wildcard-with-all=no
-
-# Deprecated modules which should not be used, separated by a comma.
-deprecated-modules=
-
-# Output a graph (.gv or any supported image format) of external dependencies
-# to the given file (report RP0402 must not be disabled).
-ext-import-graph=
-
-# Output a graph (.gv or any supported image format) of all (i.e. internal and
-# external) dependencies to the given file (report RP0402 must not be
-# disabled).
-import-graph=
-
-# Output a graph (.gv or any supported image format) of internal dependencies
-# to the given file (report RP0402 must not be disabled).
-int-import-graph=
-
-# Force import order to recognize a module as part of the standard
-# compatibility libraries.
-known-standard-library=
-
-# Force import order to recognize a module as part of a third party library.
-known-third-party=enchant
-
-# Couples of modules and preferred modules, separated by a comma.
-preferred-modules=
-
-
-[LOGGING]
-
-# The type of string formatting that logging methods do. `old` means using %
-# formatting, `new` is for `{}` formatting.
-logging-format-style=old
-
-# Logging modules to check that the string format arguments are in logging
-# function parameter format.
-logging-modules=logging
-
-
-[MESSAGES CONTROL]
-
-# Only show warnings with the listed confidence levels. Leave empty to show
-# all. Valid levels: HIGH, CONTROL_FLOW, INFERENCE, INFERENCE_FAILURE,
-# UNDEFINED.
-confidence=HIGH,
-           CONTROL_FLOW,
-           INFERENCE,
-           INFERENCE_FAILURE,
-           UNDEFINED
-
-# Disable the message, report, category or checker with the given id(s). You
-# can either give multiple identifiers separated by comma (,) or put this
-# option multiple times (only on the command line, not in the configuration
-# file where it should appear only once). You can also use "--disable=all" to
-# disable everything first and then re-enable specific checks. For example, if
-# you want to run only the similarities checker, you can use "--disable=all
-# --enable=similarities". If you want to run only the classes checker, but have
-# no Warning level messages displayed, use "--disable=all --enable=classes
-# --disable=W".
-disable=raw-checker-failed,
-        bad-inline-option,
-        locally-disabled,
-        file-ignored,
-        suppressed-message,
-        useless-suppression,
-        deprecated-pragma,
-        use-symbolic-message-instead,
-        missing-function-docstring, # Modified since here, include this line
-        missing-class-docstring,
-        missing-module-docstring,
-        wrong-import-order,
-        invalid-name,
-        too-few-public-methods,
-        too-many-locals,
-        ungrouped-imports,  # since we have isort in pre-commit
-        no-name-in-module,  # since we have flake8 to check this
-        too-many-instance-attributes,
-
-# Enable the message, report, category or checker with the given id(s). You can
-# either give multiple identifier separated by comma (,) or put this option
-# multiple time (only on the command line, not in the configuration file where
-# it should appear only once). See also the "--disable" option for examples.
-enable=c-extension-no-member
-
-
-[METHOD_ARGS]
-
-# List of qualified names (i.e., library.method) which require a timeout
-# parameter e.g. 'requests.api.get,requests.api.post'
-timeout-methods=requests.api.delete,requests.api.get,requests.api.head,requests.api.options,requests.api.patch,requests.api.post,requests.api.put,requests.api.request
-
-
-[MISCELLANEOUS]
-
-# List of note tags to take in consideration, separated by a comma.
-notes=FIXME,
-      XXX,
-      TODO
-
-# Regular expression of note tags to take in consideration.
-notes-rgx=
-
-
-[REFACTORING]
-
-# Maximum number of nested blocks for function / method body
-max-nested-blocks=5
-
-# Complete name of functions that never returns. When checking for
-# inconsistent-return-statements if a never returning function is called then
-# it will be considered as an explicit return statement and no message will be
-# printed.
-never-returning-functions=sys.exit,argparse.parse_error
-
-
-[REPORTS]
-
-# Python expression which should return a score less than or equal to 10. You
-# have access to the variables 'fatal', 'error', 'warning', 'refactor',
-# 'convention', and 'info' which contain the number of messages in each
-# category, as well as 'statement' which is the total number of statements
-# analyzed. This score is used by the global evaluation report (RP0004).
-evaluation=max(0, 0 if fatal else 10.0 - ((float(5 * error + warning + refactor + convention) / statement) * 10))
-
-# Template used to display messages. This is a python new-style format string
-# used to format the message information. See doc for all details.
-msg-template=
-
-# Set the output format. Available formats are text, parseable, colorized, json
-# and msvs (visual studio). You can also give a reporter class, e.g.
-# mypackage.mymodule.MyReporterClass.
-#output-format=
-
-# Tells whether to display a full report or only the messages.
-reports=no
-
-# Activate the evaluation score.
-score=yes
-
-
-[SIMILARITIES]
-
-# Comments are removed from the similarity computation
-ignore-comments=yes
-
-# Docstrings are removed from the similarity computation
-ignore-docstrings=yes
-
-# Imports are removed from the similarity computation
-ignore-imports=yes
-
-# Signatures are removed from the similarity computation
-ignore-signatures=yes
-
-# Minimum lines number of a similarity.
-min-similarity-lines=4
-
-
-[SPELLING]
-
-# Limits count of emitted suggestions for spelling mistakes.
-max-spelling-suggestions=4
-
-# Spelling dictionary name. No available dictionaries : You need to install
-# both the python package and the system dependency for enchant to work..
-spelling-dict=
-
-# List of comma separated words that should be considered directives if they
-# appear at the beginning of a comment and should not be checked.
-spelling-ignore-comment-directives=fmt: on,fmt: off,noqa:,noqa,nosec,isort:skip,mypy:
-
-# List of comma separated words that should not be checked.
-spelling-ignore-words=
-
-# A path to a file that contains the private dictionary; one word per line.
-spelling-private-dict-file=
-
-# Tells whether to store unknown words to the private dictionary (see the
-# --spelling-private-dict-file option) instead of raising a message.
-spelling-store-unknown-words=no
-
-
-[STRING]
-
-# This flag controls whether inconsistent-quotes generates a warning when the
-# character used as a quote delimiter is used inconsistently within a module.
-check-quote-consistency=no
-
-# This flag controls whether the implicit-str-concat should generate a warning
-# on implicit string concatenation in sequences defined over several lines.
-check-str-concat-over-line-jumps=no
-
-
-[TYPECHECK]
-
-# List of decorators that produce context managers, such as
-# contextlib.contextmanager. Add to this list to register other decorators that
-# produce valid context managers.
-contextmanager-decorators=contextlib.contextmanager
-
-# List of members which are set dynamically and missed by pylint inference
-# system, and so shouldn't trigger E1101 when accessed. Python regular
-# expressions are accepted.
-generated-members=
-
-# Tells whether to warn about missing members when the owner of the attribute
-# is inferred to be None.
-ignore-none=yes
-
-# This flag controls whether pylint should warn about no-member and similar
-# checks whenever an opaque object is returned when inferring. The inference
-# can return multiple potential results while evaluating a Python object, but
-# some branches might not be evaluated, which results in partial inference. In
-# that case, it might be useful to still emit no-member and other checks for
-# the rest of the inferred objects.
-ignore-on-opaque-inference=yes
-
-# List of symbolic message names to ignore for Mixin members.
-ignored-checks-for-mixins=no-member,
-                          not-async-context-manager,
-                          not-context-manager,
-                          attribute-defined-outside-init
-
-# List of class names for which member attributes should not be checked (useful
-# for classes with dynamically set attributes). This supports the use of
-# qualified names.
-ignored-classes=optparse.Values,thread._local,_thread._local,argparse.Namespace
-
-# Show a hint with possible names when a member name was not found. The aspect
-# of finding the hint is based on edit distance.
-missing-member-hint=yes
-
-# The minimum edit distance a name should have in order to be considered a
-# similar match for a missing member name.
-missing-member-hint-distance=1
-
-# The total number of similar names that should be taken in consideration when
-# showing a hint for a missing member.
-missing-member-max-choices=1
-
-# Regex pattern to define which classes are considered mixins.
-mixin-class-rgx=.*[Mm]ixin
-
-# List of decorators that change the signature of a decorated function.
-signature-mutators=
-
-
-[VARIABLES]
-
-# List of additional names supposed to be defined in builtins. Remember that
-# you should avoid defining new builtins when possible.
-additional-builtins=
-
-# Tells whether unused global variables should be treated as a violation.
-allow-global-unused-variables=yes
-
-# List of names allowed to shadow builtins
-allowed-redefined-builtins=
-
-# List of strings which can identify a callback function by name. A callback
-# name must start or end with one of those strings.
-callbacks=cb_,
-          _cb
-
-# A regular expression matching the name of dummy variables (i.e. expected to
-# not be used).
-dummy-variables-rgx=_+$|(_[a-zA-Z0-9_]*[a-zA-Z0-9]+?$)|dummy|^ignored_|^unused_
-
-# Argument names that match this expression will be ignored.
-ignored-argument-names=_.*|^ignored_|^unused_
-
-# Tells whether we should check for unused import in __init__ files.
-init-import=no
-
-# List of qualified module names which can have objects that can redefine
-# builtins.
-redefining-builtins-modules=six.moves,past.builtins,future.builtins,builtins,io

.readthedocs.yml

@@ -15,7 +15,7 @@ python:
   install:
     - requirements: docs/requirements.txt
 
-# We need to list all the submodules included in documenation build by DOxygen
+# We need to list all the submodules included in documentation build by Doxygen
 submodules:
   include:
     - components/mqtt/esp-mqtt

CMakeLists.txt

@@ -13,28 +13,14 @@ endif()
 # Add the following build specifications here, since these seem to be dependent
 # on config values on the root Kconfig.
 
-if(NOT BOOTLOADER_BUILD)
-
-    if(CONFIG_COMPILER_OPTIMIZATION_SIZE)
-        list(APPEND compile_options "-Os")
-        if(CMAKE_C_COMPILER_ID MATCHES "GNU")
-            list(APPEND compile_options "-freorder-blocks")
-        endif()
-    elseif(CONFIG_COMPILER_OPTIMIZATION_DEBUG)
-        list(APPEND compile_options "-Og")
-        if(CMAKE_C_COMPILER_ID MATCHES "GNU" AND NOT CONFIG_IDF_TARGET_LINUX)
-            list(APPEND compile_options "-fno-shrink-wrap")  # Disable shrink-wrapping to reduce binary size
-        endif()
-    elseif(CONFIG_COMPILER_OPTIMIZATION_NONE)
-        list(APPEND compile_options "-O0")
-    elseif(CONFIG_COMPILER_OPTIMIZATION_PERF)
-        list(APPEND compile_options "-O2")
-    endif()
-
-else()  # BOOTLOADER_BUILD
+if(BOOTLOADER_BUILD)
 
     if(CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_SIZE)
-        list(APPEND compile_options "-Os")
+        if(CMAKE_C_COMPILER_ID MATCHES "Clang")
+            list(APPEND compile_options "-Oz")
+        else()
+            list(APPEND compile_options "-Os")
+        endif()
         if(CMAKE_C_COMPILER_ID MATCHES "GNU")
             list(APPEND compile_options "-freorder-blocks")
         endif()
@@ -49,6 +35,37 @@ else()  # BOOTLOADER_BUILD
         list(APPEND compile_options "-O2")
     endif()
 
+elseif(ESP_TEE_BUILD)
+
+    if(CMAKE_C_COMPILER_ID MATCHES "Clang")
+        list(APPEND compile_options "-Oz")
+    else()
+        list(APPEND compile_options "-Os")
+        list(APPEND compile_options "-freorder-blocks")
+    endif()
+
+else()
+
+    if(CONFIG_COMPILER_OPTIMIZATION_SIZE)
+        if(CMAKE_C_COMPILER_ID MATCHES "Clang")
+            list(APPEND compile_options "-Oz")
+        else()
+            list(APPEND compile_options "-Os")
+        endif()
+        if(CMAKE_C_COMPILER_ID MATCHES "GNU")
+            list(APPEND compile_options "-freorder-blocks")
+        endif()
+    elseif(CONFIG_COMPILER_OPTIMIZATION_DEBUG)
+        list(APPEND compile_options "-Og")
+        if(CMAKE_C_COMPILER_ID MATCHES "GNU" AND NOT CONFIG_IDF_TARGET_LINUX)
+            list(APPEND compile_options "-fno-shrink-wrap")  # Disable shrink-wrapping to reduce binary size
+        endif()
+    elseif(CONFIG_COMPILER_OPTIMIZATION_NONE)
+        list(APPEND compile_options "-O0")
+    elseif(CONFIG_COMPILER_OPTIMIZATION_PERF)
+        list(APPEND compile_options "-O2")
+    endif()
+
 endif()
 
 if(CONFIG_COMPILER_CXX_EXCEPTIONS)
@@ -96,7 +113,7 @@ if(CMAKE_C_COMPILER_ID MATCHES "Clang")
     list(APPEND compile_options "-Wno-pointer-bool-conversion")
     # mbedTLS md5.c triggers this warning in md5_test_buf (false positive)
     list(APPEND compile_options "-Wno-string-concatenation")
-    # multiple cases of implict convertions between unrelated enum types
+    # multiple cases of implicit conversions between unrelated enum types
     list(APPEND compile_options "-Wno-enum-conversion")
     # When IRAM_ATTR is specified both in function declaration and definition,
     # it produces different section names, since section names include __COUNTER__.
@@ -121,8 +138,10 @@ if(CMAKE_C_COMPILER_ID MATCHES "Clang")
     list(APPEND compile_options "-Wno-c2x-extensions")
     # warning on xMPU_SETTINGS for esp32s2 has size 0 for C and 1 for C++
     list(APPEND compile_options "-Wno-extern-c-compat")
-    # warning: implicit truncation from 'int' to a one-bit wide bit-field changes value from 1 to -1
-    list(APPEND compile_options "-Wno-single-bit-bitfield-constant-conversion")
+    if(NOT (CONFIG_IDF_TARGET_LINUX AND CMAKE_HOST_SYSTEM_NAME STREQUAL "Darwin"))
+        # warning: implicit truncation from 'int' to a one-bit wide bit-field changes value from 1 to -1
+        list(APPEND compile_options "-Wno-single-bit-bitfield-constant-conversion")
+    endif()
 endif()
 # More warnings may exist in unit tests and example projects.
 
@@ -134,6 +153,10 @@ if(CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_DISABLE)
     list(APPEND compile_definitions "-DNDEBUG")
 endif()
 
+if(CONFIG_COMPILER_NO_MERGE_CONSTANTS)
+    list(APPEND compile_options "-fno-merge-constants")
+endif()
+
 if(CONFIG_COMPILER_STACK_CHECK_MODE_NORM)
     list(APPEND compile_options "-fstack-protector")
 elseif(CONFIG_COMPILER_STACK_CHECK_MODE_STRONG)
@@ -146,46 +169,8 @@ if(CONFIG_COMPILER_DUMP_RTL_FILES)
     list(APPEND compile_options "-fdump-rtl-expand")
 endif()
 
-if(NOT ${CMAKE_C_COMPILER_VERSION} VERSION_LESS 8.0.0)
-    if(CONFIG_COMPILER_HIDE_PATHS_MACROS)
-        list(APPEND compile_options "-fmacro-prefix-map=${CMAKE_SOURCE_DIR}=.")
-        list(APPEND compile_options "-fmacro-prefix-map=${IDF_PATH}=/IDF")
-    endif()
-
-    if(CONFIG_APP_REPRODUCIBLE_BUILD)
-        idf_build_set_property(DEBUG_PREFIX_MAP_GDBINIT "${BUILD_DIR}/prefix_map_gdbinit")
-
-        list(APPEND compile_options "-fdebug-prefix-map=${IDF_PATH}=/IDF")
-        list(APPEND compile_options "-fdebug-prefix-map=${PROJECT_DIR}=/IDF_PROJECT")
-        list(APPEND compile_options "-fdebug-prefix-map=${BUILD_DIR}=/IDF_BUILD")
-
-        # component dirs
-        idf_build_get_property(python PYTHON)
-        idf_build_get_property(idf_path IDF_PATH)
-        idf_build_get_property(component_dirs BUILD_COMPONENT_DIRS)
-
-        execute_process(
-            COMMAND ${python}
-                "${idf_path}/tools/generate_debug_prefix_map.py"
-                "${BUILD_DIR}"
-                "${component_dirs}"
-            OUTPUT_VARIABLE result
-            RESULT_VARIABLE ret
-        )
-        if(NOT ret EQUAL 0)
-            message(FATAL_ERROR "This is a bug. Please report to https://github.com/espressif/esp-idf/issues")
-        endif()
-
-        spaces2list(result)
-        list(LENGTH component_dirs length)
-        math(EXPR max_index "${length} - 1")
-        foreach(index RANGE ${max_index})
-            list(GET component_dirs ${index} folder)
-            list(GET result ${index} after)
-            list(APPEND compile_options "-fdebug-prefix-map=${folder}=${after}")
-        endforeach()
-    endif()
-endif()
+__generate_prefix_map(prefix_map_compile_options)
+list(APPEND compile_options ${prefix_map_compile_options})
 
 if(CONFIG_COMPILER_DISABLE_GCC12_WARNINGS)
     list(APPEND compile_options "-Wno-address"
@@ -199,10 +184,22 @@ if(CONFIG_COMPILER_DISABLE_GCC13_WARNINGS)
                                     "-Wno-dangling-reference")
 endif()
 
+if(CONFIG_COMPILER_DISABLE_GCC14_WARNINGS)
+    list(APPEND compile_options "-Wno-calloc-transposed-args")
+endif()
+
+if(CONFIG_COMPILER_DISABLE_DEFAULT_ERRORS)
+    if(NOT CMAKE_C_COMPILER_ID MATCHES "Clang")
+        idf_build_replace_option_from_property(COMPILE_OPTIONS "-Werror" "-Werror=all")
+    endif()
+endif()
+
 # GCC-specific options
 if(CMAKE_C_COMPILER_ID STREQUAL "GNU")
-    list(APPEND compile_options "-fstrict-volatile-bitfields"
-                                )
+    list(APPEND compile_options "-fstrict-volatile-bitfields")
+    if(CONFIG_COMPILER_STATIC_ANALYZER)
+        list(APPEND compile_options "-fanalyzer")
+    endif()
 endif()
 
 if(CONFIG_ESP_SYSTEM_USE_EH_FRAME)
@@ -210,20 +207,54 @@ if(CONFIG_ESP_SYSTEM_USE_EH_FRAME)
   list(APPEND link_options "-Wl,--eh-frame-hdr")
 endif()
 
+if(CONFIG_ESP_SYSTEM_USE_FRAME_POINTER)
+    list(APPEND compile_options "-fno-omit-frame-pointer")
+    if(CMAKE_C_COMPILER_ID MATCHES "GNU")
+        list(APPEND compile_options "-mno-omit-leaf-frame-pointer")
+    endif()
+endif()
+
 list(APPEND link_options "-fno-lto")
 
 if(CONFIG_IDF_TARGET_LINUX AND CMAKE_HOST_SYSTEM_NAME STREQUAL "Darwin")
+    # Not all versions of the MacOS linker support the -warn_commons flag.
+    # ld version 1053.12 (and above) have been tested to support it.
+    # Hence, we extract the version string from the linker output
+    # before including the flag.
+
+    # Get the ld version, capturing both stdout and stderr
+    execute_process(
+        COMMAND ${CMAKE_LINKER} -v
+        OUTPUT_VARIABLE LD_VERSION_OUTPUT
+        ERROR_VARIABLE LD_VERSION_ERROR
+        OUTPUT_STRIP_TRAILING_WHITESPACE
+        ERROR_STRIP_TRAILING_WHITESPACE
+    )
+
+    # Combine stdout and stderr
+    set(LD_VERSION_OUTPUT "${LD_VERSION_OUTPUT}\n${LD_VERSION_ERROR}")
+
+    # Extract the version string
+    string(REGEX MATCH "PROJECT:(ld|dyld)-([0-9]+)\\.([0-9]+)" LD_VERSION_MATCH "${LD_VERSION_OUTPUT}")
+    set(LD_VERSION_MAJOR_MINOR "${CMAKE_MATCH_2}.${CMAKE_MATCH_3}")
+
+    message(STATUS "Linker Version: ${LD_VERSION_MAJOR_MINOR}")
+
+    # Compare the version with 1053.12
+    if(LD_VERSION_MAJOR_MINOR VERSION_GREATER_EQUAL "1053.12")
+        list(APPEND link_options "-Wl,-warn_commons")
+    endif()
+
     list(APPEND link_options "-Wl,-dead_strip")
-    list(APPEND link_options "-Wl,-warn_commons")
 else()
     list(APPEND link_options "-Wl,--gc-sections")
     list(APPEND link_options "-Wl,--warn-common")
 endif()
 
 # SMP FreeRTOS user provided minimal idle hook. This allows the user to provide
-# their own copy of vApplicationMinimalIdleHook()
-if(CONFIG_FREERTOS_USE_MINIMAL_IDLE_HOOK)
-    list(APPEND link_options "-Wl,--wrap=vApplicationMinimalIdleHook")
+# their own copy of vApplicationPassiveIdleHook()
+if(CONFIG_FREERTOS_USE_PASSIVE_IDLE_HOOK)
+    list(APPEND link_options "-Wl,--wrap=vApplicationPassiveIdleHook")
 endif()
 
 # Placing jump tables in flash would cause issues with code that required
@@ -236,22 +267,15 @@ if(CMAKE_C_COMPILER_ID MATCHES "GNU")
 endif()
 
 if(CMAKE_C_COMPILER_ID MATCHES "Clang")
-    list(APPEND compile_options "-fno-use-cxa-atexit")
+    list(APPEND compile_options "-fno-use-cxa-atexit")  # TODO IDF-10934
+else()
+    list(APPEND cxx_compile_options "-fuse-cxa-atexit")
 endif()
 
 if(COMPILER_RT_LIB_NAME)
     list(APPEND link_options "-rtlib=${CONFIG_COMPILER_RT_LIB_NAME}")
 endif()
 
-# For the transition period from 32-bit time_t to 64-bit time_t,
-# auto-detect the size of this type and set corresponding variable.
-include(CheckTypeSize)
-check_type_size("time_t" TIME_T_SIZE)
-if(TIME_T_SIZE)
-    idf_build_set_property(TIME_T_SIZE ${TIME_T_SIZE})
-else()
-    message(FATAL_ERROR "Failed to determine sizeof(time_t)")
-endif()
 
 idf_build_set_property(COMPILE_OPTIONS "${compile_options}" APPEND)
 idf_build_set_property(C_COMPILE_OPTIONS "${c_compile_options}" APPEND)

COMPATIBILITY.md

@@ -52,47 +52,93 @@ Supported since ESP-IDF v4.2.
 
 | Release branch         | Recommended | Required |
 |------------------------|-------------|----------|
-| release/v4.2           | v4.2.3      | v4.2.3   |
-| release/v4.3           | v4.3.3      | v4.3.3   |
-| release/v4.4           | v4.4.6      | v4.4.1   |
-| release/v5.0           | v5.0.4      | v5.0     |
-| release/v5.1           | v5.1.2      | v5.1     |
-| release/v5.2 and above | v5.2        | v5.2     |
+| release/v4.2           | v4.2.3+     | v4.2     |
+| release/v4.3           | v4.3.3+     | v4.3     |
+| release/v4.4           | v4.4.6+     | v4.4     |
+| release/v5.0           | v5.0.4+     | v5.0     |
+| release/v5.1           | v5.1.2+     | v5.1     |
+| release/v5.2 and above | v5.2+       | v5.2     |
 
 ### ESP32-C3
 
-#### v0.2, v0.3
+#### v0.2 - v0.4
 
 Supported since ESP-IDF v4.3.
 
-#### v0.4
+#### v1.1
 
-To be added.
+| Release branch         | Recommended | Required |
+|------------------------|-------------|----------|
+| release/v4.2           | EOL         | EOL      |
+| release/v4.3           | v4.3.7+     | v4.3.7   |
+| release/v4.4           | v4.4.7+     | v4.4.7   |
+| release/v5.0           | v5.0.5+     | v5.0.5   |
+| release/v5.1           | v5.1.3+     | v5.1.3   |
+| release/v5.2 and above | v5.2+       | v5.2     |
 
 ### ESP32-S3
 
-#### v0.1
+#### v0.1, v0.2
 
 Supported since ESP-IDF v4.4.
 
-#### v0.2
-
-To be added.
-
 ### ESP32-C2 & ESP8684
 
-#### v1.0
+#### v1.0, v1.1
 
 Supported since ESP-IDF v5.0.
 
-#### v1.1
+#### v1.2
 
-To be added.
+| Release branch         | Recommended | Required |
+|------------------------|-------------|----------|
+| release/v5.0           | v5.0.7+     | v5.0     |
+| release/v5.1           | v5.1.4+     | v5.1     |
+| release/v5.2           | v5.2.2+     | v5.2     |
+| release/v5.3 and above | v5.3+       | v5.3     |
+
+#### v2.0
+
+| Release branch         | Recommended | Required |
+|------------------------|-------------|----------|
+| release/v5.0           | v5.0.8+     | v5.0.8   |
+| release/v5.1           | v5.1.5+     | v5.1.5*  |
+| release/v5.2           | v5.2.4+     | v5.2.4   |
+| release/v5.3           | v5.3.2+     | v5.3.2*  |
+| release/v5.4 and above | v5.4+       | v5.4     |
+
+Note: IDF v5.1.5 and v5.3.2 are compatible with C2 v2.0. However the chip revision check hasn't been updated on these releases. Enable `ESP32C2_REV2_DEVELOPMENT` config to bypass the outdated check.
+
+### ESP32-C6
+
+#### v0.0, v0.1
+
+Supported since ESP-IDF v5.1.
+
+#### v0.2
+
+| Release branch         | Recommended | Required |
+|------------------------|-------------|----------|
+| release/v5.1           | v5.1.5+     | v5.1     |
+| release/v5.2           | v5.2.4+     | v5.2     |
+| release/v5.3           | v5.3.2+     | v5.3     |
+| release/v5.4 and above | v5.4+       | v5.4     |
+
+### ESP32-H2
+
+#### v0.1, v0.2
+
+Supported since ESP-IDF v5.1.
 
 #### v1.2
 
-To be added.
-
+| Release branch         | Recommended | Required |
+|------------------------|-------------|----------|
+| release/v5.1           | v5.1.6+     | v5.1.6   |
+| release/v5.2           | v5.2.5+     | v5.2.5   |
+| release/v5.3           | v5.3.3+     | v5.3.3   |
+| release/v5.4           | v5.4.1+     | v5.4.1   |
+| release/v5.5 and above | v5.5+       | v5.5     |
 
 ## What If the ESP-IDF Version Is Lower than the `Required` Version?
 

COMPATIBILITY_CN.md

@@ -50,48 +50,95 @@
 
 #### v1.0
 
-| 发布分支               | 推荐版本    | 需求版本 |
+| 发布分支                | 推荐版本     | 需求版本 |
 |------------------------|-------------|----------|
-| release/v4.2           | v4.2.3      | v4.2.3   |
-| release/v4.3           | v4.3.3      | v4.3.3   |
-| release/v4.4           | v4.4.6      | v4.4.1   |
-| release/v5.0           | v5.0.4      | v5.0     |
-| release/v5.1           | v5.1.2      | v5.1     |
-| release/v5.2 及以上     | v5.2        | v5.2     |
+| release/v4.2           | v4.2.3+     | v4.2     |
+| release/v4.3           | v4.3.3+     | v4.3     |
+| release/v4.4           | v4.4.6+     | v4.4     |
+| release/v5.0           | v5.0.4+     | v5.0     |
+| release/v5.1           | v5.1.2+     | v5.1     |
+| release/v5.2 及以上     | v5.2+       | v5.2     |
 
 ### ESP32-C3
 
-#### v0.2 和 v0.3
+#### v0.2 - v0.4
 
 从 ESP-IDF v4.3 开始支持。
 
-#### v0.4
+#### v1.1
 
-待更新。
+| 发布分支                | 推荐版本      | 需求版本  |
+|------------------------|-------------|----------|
+| release/v4.2           | EOL         | EOL      |
+| release/v4.3           | v4.3.7+     | v4.3.7   |
+| release/v4.4           | v4.4.7+     | v4.4.7   |
+| release/v5.0           | v5.0.5+     | v5.0.5   |
+| release/v5.1           | v5.1.3+     | v5.1.3   |
+| release/v5.2 及以上     | v5.2+       | v5.2     |
 
 ### ESP32-S3
 
-#### v0.1
+#### v0.1, v0.2
 
 从 ESP-IDF v4.4 开始支持。
 
-#### v0.2
-
-待更新。
-
 ### ESP32-C2 & ESP8684
 
-#### v1.0
+#### v1.0, v1.1
 
 从 ESP-IDF v5.0 开始支持。
 
-#### v1.1
+#### v1.2
 
-待更新。
+| 发布分支                | 推荐版本      | 需求版本  |
+|------------------------|-------------|----------|
+| release/v5.0           | v5.0.7+     | v5.0     |
+| release/v5.1           | v5.1.4+     | v5.1     |
+| release/v5.2           | v5.2.2+     | v5.1     |
+| release/v5.3 及以上     | v5.3+       | v5.3     |
+
+#### v2.0
+
+| 发布分支                | 推荐版本      | 需求版本  |
+|------------------------|-------------|----------|
+| release/v5.0           | v5.0.8+     | v5.0.8   |
+| release/v5.1           | v5.1.5+     | v5.1.5*  |
+| release/v5.2           | v5.2.4+     | v5.2.4   |
+| release/v5.3           | v5.3.2+     | v5.3.2*  |
+| release/v5.4 及以上     | v5.4+       | v5.4     |
+
+提示: IDF v5.1.5 及 v5.3.2 与 C2 v2.0 兼容，但芯片版本检查尚未在这些发布版本更新。使能 `ESP32C2_REV2_DEVELOPMENT` 选项来跳过这些过时的检查。
+
+### ESP32-C6
+
+#### v0.0, v0.1
+
+从 ESP-IDF v5.1 开始支持。
+
+#### v0.2
+
+| 发布分支                | 推荐版本      | 需求版本  |
+|------------------------|-------------|----------|
+| release/v5.1           | v5.1.5+     | v5.1     |
+| release/v5.2           | v5.2.4+     | v5.2     |
+| release/v5.3           | v5.3.2+     | v5.3     |
+| release/v5.4 及以上     | v5.4+       | v5.4     |
+
+### ESP32-H2
+
+#### v0.1, v0.2
+
+从 ESP-IDF v5.1 开始支持。
 
 #### v1.2
 
-待更新。
+| 发布分支                | 推荐版本      | 需求版本  |
+|------------------------|-------------|----------|
+| release/v5.1           | v5.1.6+     | v5.1.6   |
+| release/v5.2           | v5.2.5+     | v5.2.5   |
+| release/v5.3           | v5.3.3+     | v5.3.3   |
+| release/v5.4           | v5.4.1+     | v5.4.1   |
+| release/v5.5 及以上     | v5.5+       | v5.5     |
 
 
 ## 如果 ESP-IDF 版本低于 `需求版本` 会出现什么情况？

Kconfig

@@ -22,7 +22,6 @@ mainmenu "Espressif IoT Development Framework Configuration"
 
     config IDF_ENV_BRINGUP
         bool
-        default "y" if IDF_TARGET_ESP32P4
         help
             - This option is ONLY used when doing new chip bringup.
             - This option will only enable necessary hw / sw settings for running
@@ -49,6 +48,10 @@ mainmenu "Espressif IoT Development Framework Configuration"
         bool
         default "y" if IDF_TOOLCHAIN="clang"
 
+    config IDF_TOOLCHAIN_GCC
+        bool
+        default "y" if IDF_TOOLCHAIN="gcc"
+
     config IDF_TARGET_ARCH_RISCV
         bool
         default "n"
@@ -76,10 +79,6 @@ mainmenu "Espressif IoT Development Framework Configuration"
         string
         default "$IDF_INIT_VERSION"
 
-    config IDF_TARGET_LINUX
-        bool
-        default "y" if IDF_TARGET="linux"
-
     config IDF_TARGET_ESP32
         bool
         default "y" if IDF_TARGET="esp32"
@@ -114,6 +113,14 @@ mainmenu "Espressif IoT Development Framework Configuration"
         select FREERTOS_UNICORE
         select IDF_TARGET_ARCH_RISCV
 
+    config IDF_TARGET_ESP32C5
+        bool
+        default "y" if IDF_TARGET="esp32c5"
+        select FREERTOS_UNICORE
+        select IDF_TARGET_ARCH_RISCV
+        # TODO: [ESPTOOL-1044] remove when stub supported
+        select IDF_ENV_BRINGUP
+
     config IDF_TARGET_ESP32P4
         bool
         default "y" if IDF_TARGET="esp32p4"
@@ -125,6 +132,28 @@ mainmenu "Espressif IoT Development Framework Configuration"
         select FREERTOS_UNICORE
         select IDF_TARGET_ARCH_RISCV
 
+    config IDF_TARGET_ESP32C61
+        bool
+        default "y" if IDF_TARGET="esp32c61"
+        select FREERTOS_UNICORE
+        select IDF_TARGET_ARCH_RISCV
+
+    config IDF_TARGET_ESP32H21
+        bool
+        default "y" if IDF_TARGET="esp32h21"
+        select FREERTOS_UNICORE
+        select IDF_TARGET_ARCH_RISCV
+        select IDF_ENV_FPGA
+        select IDF_ENV_BRINGUP
+
+    config IDF_TARGET_ESP32H4
+        bool
+        default "y" if IDF_TARGET="esp32h4"
+        select FREERTOS_UNICORE  # TODO: [ESP32H4] IDF-12319, need remove
+        select IDF_TARGET_ARCH_RISCV
+        select IDF_ENV_FPGA
+        select IDF_ENV_BRINGUP
+
     config IDF_TARGET_LINUX
         bool
         default "y" if IDF_TARGET="linux"
@@ -139,6 +168,10 @@ mainmenu "Espressif IoT Development Framework Configuration"
         default 0x000D if IDF_TARGET_ESP32C6
         default 0x0010 if IDF_TARGET_ESP32H2
         default 0x0012 if IDF_TARGET_ESP32P4
+        default 0x0017 if IDF_TARGET_ESP32C5
+        default 0x0014 if IDF_TARGET_ESP32C61
+        default 0x0019 if IDF_TARGET_ESP32H21
+        default 0x001C if IDF_TARGET_ESP32H4
         default 0xFFFF
 
 
@@ -310,8 +343,8 @@ mainmenu "Espressif IoT Development Framework Configuration"
             help
                 This option sets compiler optimization level (gcc -O argument) for the app.
 
-                - The "Debug" setting will add the -0g flag to CFLAGS.
-                - The "Size" setting will add the -0s flag to CFLAGS.
+                - The "Debug" setting will add the -Og flag to CFLAGS.
+                - The "Size" setting will add the -Os flag to CFLAGS (-Oz with Clang).
                 - The "Performance" setting will add the -O2 flag to CFLAGS.
                 - The "None" setting will add the -O0 flag to CFLAGS.
 
@@ -332,7 +365,7 @@ mainmenu "Espressif IoT Development Framework Configuration"
             config COMPILER_OPTIMIZATION_DEBUG
                 bool "Debug (-Og)"
             config COMPILER_OPTIMIZATION_SIZE
-                bool "Optimize for size (-Os)"
+                bool "Optimize for size (-Os with GCC, -Oz with Clang)"
             config COMPILER_OPTIMIZATION_PERF
                 bool "Optimize for performance (-O2)"
             config COMPILER_OPTIMIZATION_NONE
@@ -375,6 +408,21 @@ mainmenu "Espressif IoT Development Framework Configuration"
 
         endchoice # assertions
 
+        config COMPILER_ASSERT_NDEBUG_EVALUATE
+            bool "Enable the evaluation of the expression inside assert(X) when NDEBUG is set"
+            default y
+            help
+                When NDEBUG is set, assert(X) will not cause code to trigger an assertion.
+                With this option set, assert(X) will still evaluate the expression X, though
+                the result will never cause an assertion. This means that if X is a function
+                then the function will be called.
+
+                This is not according to the standard, which states that the assert(X) should
+                be replaced with ((void)0) if NDEBUG is defined.
+
+                In ESP-IDF v6.0 the default behavior will change to "no" to be in line with the
+                standard.
+
         choice COMPILER_FLOAT_LIB_FROM
             prompt "Compiler float lib source"
             default COMPILER_FLOAT_LIB_FROM_RVFPLIB if ESP_ROM_HAS_RVFPLIB
@@ -496,6 +544,15 @@ mainmenu "Espressif IoT Development Framework Configuration"
             help
                 Stack smashing protection.
 
+        config COMPILER_NO_MERGE_CONSTANTS
+            bool "Disable merging const sections"
+            depends on IDF_TOOLCHAIN_GCC
+            help
+                Disable merging identical constants (string/floating-point) across compilation units.
+                This helps in better size analysis of the application binary as the rodata section
+                distribution is more uniform across libraries. On downside, it may increase
+                the binary size and hence should be used during development phase only.
+
         config COMPILER_WARN_WRITE_STRINGS
             bool "Enable -Wwrite-strings warning flag"
             default "n"
@@ -522,6 +579,20 @@ mainmenu "Espressif IoT Development Framework Configuration"
 
                 This option can be enabled for RISC-V targets only.
 
+        config COMPILER_DISABLE_DEFAULT_ERRORS
+            bool "Disable errors for default warnings"
+            default "y"
+            help
+                Enable this option if you do not want default warnings to be considered as errors,
+                especially when updating IDF.
+
+                This is a temporary flag that could help to allow upgrade while having
+                some time to address the warnings raised by those default warnings.
+                Alternatives are:
+                1) fix code (preferred),
+                2) remove specific warnings,
+                3) do not consider specific warnings as error.
+
         config COMPILER_DISABLE_GCC12_WARNINGS
             bool "Disable new warnings introduced in GCC 12"
             default "n"
@@ -536,6 +607,13 @@ mainmenu "Espressif IoT Development Framework Configuration"
                 Enable this option if use GCC 13 or newer, and want to disable warnings which don't appear with
                 GCC 12.
 
+        config COMPILER_DISABLE_GCC14_WARNINGS
+            bool "Disable new warnings introduced in GCC 14"
+            default "n"
+            help
+                Enable this option if use GCC 14 or newer, and want to disable warnings which don't appear with
+                GCC 13.
+
         config COMPILER_DUMP_RTL_FILES
             bool "Dump RTL files during compilation"
             help
@@ -570,9 +648,44 @@ mainmenu "Espressif IoT Development Framework Configuration"
             default "gcc" if COMPILER_RT_LIB_GCCLIB
             default "" if COMPILER_RT_LIB_HOST
 
+        choice COMPILER_ORPHAN_SECTIONS
+            prompt "Orphan sections handling"
+            default COMPILER_ORPHAN_SECTIONS_WARNING
+            depends on !IDF_TARGET_LINUX
+            help
+                If the linker finds orphan sections, it attempts to place orphan sections after sections of the same
+                attribute such as code vs data, loadable vs non-loadable, etc.
+                That means that orphan sections could placed between sections defined in IDF linker scripts.
+                This could lead to corruption of the binary image. Configure the linker action here.
+
+            config COMPILER_ORPHAN_SECTIONS_WARNING
+                bool "Place with warning"
+                help
+                    Places orphan sections with a warning message.
+
+            config COMPILER_ORPHAN_SECTIONS_PLACE
+                bool "Place silently"
+                help
+                    Places orphan sections without a warning/error message.
+        endchoice
+
+        config COMPILER_STATIC_ANALYZER
+            bool "Enable compiler static analyzer"
+            default "n"
+            depends on IDF_TOOLCHAIN_GCC
+            help
+                Enable compiler static analyzer. This may produce false-positive results and increases compile time.
+
     endmenu # Compiler Options
 
     menu "Component config"
+        comment "!!! MINIMAL_BUILD is enabled !!!"
+        depends on "${IDF_MINIMAL_BUILD}"
+        comment "Only common components and those transitively required by the main component are listed"
+        depends on "${IDF_MINIMAL_BUILD}"
+        comment "If a component configuration is missing, please add it to the main component's requirements"
+        depends on "${IDF_MINIMAL_BUILD}"
+
         source "$COMPONENT_KCONFIGS_SOURCE_FILE"
     endmenu
 
@@ -590,4 +703,7 @@ mainmenu "Espressif IoT Development Framework Configuration"
             - CONFIG_ESPTOOLPY_FLASHFREQ_120M && CONFIG_ESPTOOLPY_FLASH_SAMPLE_MODE_DTR
             - CONFIG_SPIRAM_SPEED_120M && CONFIG_SPIRAM_MODE_OCT
             - CONFIG_BOOTLOADER_CACHE_32BIT_ADDR_QUAD_FLASH
-            - CONFIG_MBEDTLS_USE_CRYPTO_ROM_IMPL
+            - CONFIG_ESP_WIFI_EAP_TLS1_3
+            - CONFIG_ESP_WIFI_ENABLE_ROAMING_APP
+            - CONFIG_USB_HOST_EXT_PORT_RESET_ATTEMPTS
+            - CONFIG_LIBC_PICOLIBC

README.md

@@ -15,16 +15,18 @@ ESP-IDF is the development framework for Espressif SoCs supported on Windows, Li
 
 The following table shows ESP-IDF support of Espressif SoCs where ![alt text][preview] and ![alt text][supported] denote preview status and support, respectively. The preview support is usually limited in time and intended for beta versions of chips. Please use an ESP-IDF release where the desired SoC is already supported.
 
-|Chip         |         v4.3           |          v4.4          |          v5.0          |         v5.1           |         v5.2           |                                                            |
-|:----------- | :---------------------:| :---------------------:| :---------------------:| :--------------------: | :--------------------: | :----------------------------------------------------------|
-|ESP32        | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] |                                                            |
-|ESP32-S2     | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] |                                                            |
-|ESP32-C3     | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] |                                                            |
-|ESP32-S3     |                        | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] | [Announcement](https://www.espressif.com/en/news/ESP32_S3) |
-|ESP32-C2     |                        |                        | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] | [Announcement](https://www.espressif.com/en/news/ESP32-C2) |
-|ESP32-C6     |                        |                        |                        | ![alt text][supported] | ![alt text][supported] | [Announcement](https://www.espressif.com/en/news/ESP32_C6) |
-|ESP32-H2     |                        |                        |                        | ![alt text][supported] | ![alt text][supported] | [Announcement](https://www.espressif.com/en/news/ESP32_H2) |
-|ESP32-P4     |                        |                        |                        |                        | ![alt text][preview]   | [Announcement](https://www.espressif.com/en/news/ESP32-P4) |
+|Chip         |          v5.0          |         v5.1           |         v5.2           |         v5.3           |          v5.4           |                                                                     |
+|:----------- | :---------------------:| :--------------------: | :--------------------: | :--------------------: |  :--------------------: |:------------------------------------------------------------------- |
+|ESP32        | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] |  ![alt text][supported] |                                                                     |
+|ESP32-S2     | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] |  ![alt text][supported] |                                                                     |
+|ESP32-C3     | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] |  ![alt text][supported] |                                                                     |
+|ESP32-S3     | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] |  ![alt text][supported] |[Announcement](https://www.espressif.com/en/news/ESP32_S3)           |
+|ESP32-C2     | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] |  ![alt text][supported] |[Announcement](https://www.espressif.com/en/news/ESP32-C2)           |
+|ESP32-C6     |                        | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] |  ![alt text][supported] |[Announcement](https://www.espressif.com/en/news/ESP32_C6)           |
+|ESP32-H2     |                        | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] |  ![alt text][supported] |[Announcement](https://www.espressif.com/en/news/ESP32_H2)           |
+|ESP32-P4     |                        |                        |                        | ![alt text][supported] |  ![alt text][supported] |[Announcement](https://www.espressif.com/en/news/ESP32-P4)           |
+|ESP32-C5     |                        |                        |                        |                        |  ![alt text][preview]   |[Announcement](https://www.espressif.com/en/news/ESP32-C5)           |
+|ESP32-C61    |                        |                        |                        |                        |  ![alt text][preview]   |[Announcement](https://www.espressif.com/en/products/socs/esp32-c61) |
 
 [supported]: https://img.shields.io/badge/-supported-green "supported"
 [preview]: https://img.shields.io/badge/-preview-orange "preview"

README_CN.md

@@ -15,16 +15,18 @@ ESP-IDF 是乐鑫官方推出的物联网开发框架，支持 Windows、Linux
 
 下表总结了乐鑫芯片在 ESP-IDF 各版本中的支持状态，其中 ![alt text][supported] 代表已支持，![alt text][preview] 代表目前处于预览支持状态。预览支持状态通常有时间限制，而且仅适用于测试版芯片。请确保使用与芯片相匹配的 ESP-IDF 版本。
 
-|芯片         |         v4.3           |          v4.4          |          v5.0          |          v5.1          |          v5.2          |                                                                 |
-|:----------- | :---------------------:| :---------------------:| :---------------------:| :--------------------: | :--------------------: | :-------------------------------------------------------------- |
-|ESP32        | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] |                                                                 |
-|ESP32-S2     | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] |                                                                 |
-|ESP32-C3     | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] |                                                                 |
-|ESP32-S3     |                        | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] | [芯片发布公告](https://www.espressif.com/zh-hans/news/ESP32_S3) |
-|ESP32-C2     |                        |                        | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] | [芯片发布公告](https://www.espressif.com/zh-hans/news/ESP32-C2) |
-|ESP32-C6     |                        |                        |                        | ![alt text][supported] | ![alt text][supported] | [芯片发布公告](https://www.espressif.com/zh-hans/news/ESP32_C6) |
-|ESP32-H2     |                        |                        |                        | ![alt text][supported] | ![alt text][supported] | [芯片发布公告](https://www.espressif.com/zh-hans/news/ESP32_H2) |
-|ESP32-P4     |                        |                        |                        |                        | ![alt text][preview]   | [芯片发布公告](https://www.espressif.com/en/news/ESP32-P4)      |
+|芯片         |          v5.0          |          v5.1          |          v5.2          |          v5.3          |          v5.4          |                                                                           |
+|:----------- | :---------------------:| :--------------------: | :--------------------: | :--------------------: | :--------------------: | :------------------------------------------------------------------------ |
+|ESP32        | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] |                                                                           |
+|ESP32-S2     | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] |                                                                           |
+|ESP32-C3     | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] |                                                                           |
+|ESP32-S3     | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] | [芯片发布公告](https://www.espressif.com/zh-hans/news/ESP32_S3)           |
+|ESP32-C2     | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] | [芯片发布公告](https://www.espressif.com/zh-hans/news/ESP32-C2)           |
+|ESP32-C6     |                        | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] | [芯片发布公告](https://www.espressif.com/zh-hans/news/ESP32_C6)           |
+|ESP32-H2     |                        | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] | ![alt text][supported] | [芯片发布公告](https://www.espressif.com/zh-hans/news/ESP32_H2)           |
+|ESP32-P4     |                        |                        |                        | ![alt text][supported] | ![alt text][supported] | [芯片发布公告](https://www.espressif.com/zh-hans/news/ESP32-P4)           |
+|ESP32-C5     |                        |                        |                        |                        | ![alt text][preview]   | [芯片发布公告](https://www.espressif.com/zh-hans/news/ESP32-C5)           |
+|ESP32-C61    |                        |                        |                        |                        | ![alt text][preview]   | [芯片发布公告](https://www.espressif.com/zh-hans/products/socs/esp32-c61) |
 
 [supported]: https://img.shields.io/badge/-%E6%94%AF%E6%8C%81-green "supported"
 [preview]: https://img.shields.io/badge/-%E9%A2%84%E8%A7%88-orange "preview"
@@ -121,7 +123,7 @@ ESP-IDF 中的子模块采用相对路径（[详见 .gitmodules 文件](.gitmodu
 
 * 最新版的文档：https://docs.espressif.com/projects/esp-idf/ ，该文档是由本仓库 [docs 目录](docs) 构建得到。
 
-* [初学者指南：主要概念和资源](https://www.bilibili.com/video/BV1114y1r7du/) 
+* [初学者指南：主要概念和资源](https://www.bilibili.com/video/BV1114y1r7du/)
 
 * 可以前往 [esp32.com 论坛](https://esp32.com/) 提问，挖掘社区资源。
 

ROADMAP.md

@@ -0,0 +1,130 @@
+# ESP-IDF Project Roadmap 2025 
+
+* [中文版](./ROADMAP_CN.md)
+
+This document outlines the goals of ESP-IDF project and is shared for the convenience of our customers. It is important to clarify that this document is not a binding commitment to our customers. Instead, its primary purpose is to offer a clear roadmap and direction for the project's development. By openly sharing this information, we aim to enhance our customers' understanding, promote transparency and ensure alignment with the overarching objectives of the ESP-IDF project.
+
+## Project Overview
+
+### Project Goals
+
+In both minor and major releases, we integrate new chip support to enhance our product range. By expanding the chip matrix, we broaden the scope of our offerings, catering to a wider audience with diverse needs. This proactive approach ensures that our products remain at the forefront of technological advancements, consistently meeting and exceeding customer expectations.
+
+Furthermore, we prioritize bugfix releases for active branches, focusing on improving the stability and performance of products already in production. By addressing bugs promptly, we aim to enhance the overall user experience and provide tangible benefits to customers relying on our solutions. This proactive maintenance strategy reflects our commitment to delivering reliable, high-quality products to our valued customer base.
+
+Below are the main objectives that ESP-IDF project/teams would like to implement in 2025.
+
+-   New Chip Support
+
+    -   Add support for ESP32-C5
+    -   Add support for ESP32-C61
+
+-   More Minor/Major Releases
+
+    -   Release IDF v5.5 in the middle of 2025
+    -   Release IDF v6.0 at the end of 2025
+
+-   More Bugfix Releases
+
+    -   Release v5.0.8 and v5.0.9 before ESP-IDF v5.0 goes End of Life in May 2025
+    -   Release v5.1.6 and v5.1.7 before ESP-IDF v5.1 goes End of Life in December 2025
+    -   Do more bugfix releases for IDF v5.2 and IDF v5.3 before release/5.2 and release/5.3 enter maintenance period
+    -   Do more bug fixes releases for release/5.4 and release/5.5, and push the two releases to be more stable and production-ready
+
+-   Major Changes
+
+    -   We plan to upgrade MbedTLS to v4.x series in IDF v6.0. In addition, we will also be migrating to newer PSA crypto API as part of this upgrade. Please note that this may involve some breaking changes on the application side for the crypto API usage.
+
+Please note that support status of previous silicones could be found on [ESP-IDF Release and SoC Compatibility](https://github.com/espressif/esp-idf#esp-idf-release-and-soc-compatibility).
+
+### Roadmap Details
+
+The ESP-IDF project prioritizes consistent maintenance and updates to ensure our customers remain at the forefront of technological advancements. Our commitment to ongoing development ensures that customers continuously benefit from the latest innovations in the field.
+
+Moreover, we are dedicated to empowering our customers to leverage newly implemented features and enhanced functionalities through iterative improvements. Our steadfast commitment to pushing boundaries ensures that clients not only keep pace with evolving technology but also extract optimal value from the cutting-edge capabilities of our products.
+
+Below are the main roadmap details for functional areas inside ESP-IDF.
+
+-   New Chip Support
+
+    -   Add the initial support for the mass production version of ESP32-C5 in ESP-IDF v5.5, refer to [ESP32-C5 Support Status](https://github.com/espressif/esp-idf/issues/14021)
+    -   Add the initial support for the mass production version of ESP32-C61 in ESP-IDF v5.5, refer to [ESP32-C61 Support Status](https://developer.espressif.com/pages/chip-support-status/esp32c61/#esp-idf)
+
+-   Bugfix releases
+
+    -   Do bugfix releases v5.0.8 and v5.0.9 and stop maintaining ESP-IDF v5.0 in May 2025
+    -   Do bugfix releases v5.1.6 and v5.1.7 and stop maintaining ESP-IDF v5.1 in December 2025
+    -   Release bugfix IDF v5.2.4, IDF v5.2.5 and IDF v5.2.6 in 2025, and push release/5.2 to maintenance period from February 2025
+    -   Release bugfix IDF v5.3.3 and IDF v5.3.4 in 2025, and push release/5.3 to maintenance period from July 2025
+    -   Do more bug fixes releases for release/5.4 (IDF v5.4.1, IDF v5.4.2, IDF v5.4.3) and release/5.5 (IDF v5.5.1, IDF v5.5.2), and push releases to be more stable and more production-ready
+
+## ESP-IDF Planning information
+
+For the full list of ESP-IDF releases, please visit https://github.com/espressif/esp-idf/releases
+
+All the information provided here is subject to change without notice, due to business reasons and other factors.
+
+### ESP-IDF Major Releases
+
+```mermaid
+timeline
+
+        title ESP-IDF Major Releases
+        section 2025 Q1 <br> Major Release Planning
+          No version planned : N/A             
+        section 2025 Q2 <br> Major Release Planning
+          No version planned : N/A   
+        section 2025 Q3 <br> Major Release Planning
+          No version planned : N/A    
+        section 2025 Q4 <br> Major Release Planning
+          v6.0-beta1 : 2025/11/13
+          v6.0-beta2 : 2025/12/05
+          v6.0-RC1 : 2026/01/14   
+          v6.0-RC2 : 2026/02/06  
+          v6.0 : 2026/02/13   
+```
+  
+### ESP-IDF Minor Releases
+
+```mermaid
+timeline
+
+        title ESP-IDF Minor Releases
+        section 2025 Q1 <br> Minor Release Planning
+          No version planned : N/A               
+        section 2025 Q2 <br> Minor Release Planning
+          v5.5-beta1 : 2025/05/14
+          v5.5-beta2 : 2025/06/04    
+        section 2025 Q3 <br> Minor Release Planning
+          v5.5-RC1 : 2025/07/07  
+          v5.5-RC2 : 2025/07/28  
+          v5.5 : 2025/08/04       
+        section 2025 Q4 <br> Minor Release Planning
+          No version planned : N/A    
+```
+
+### ESP-IDF Bugfix Releases
+
+```mermaid
+timeline
+
+        title ESP-IDF Bugfix Releases
+        section 2025 Q1 <br> Bugfix Release Planning
+          v5.0.8 : 2025/01/14
+          v5.1.6 : 2025/02/18
+          v5.2.4 : 2025/02/23
+          v5.2.5 : 2025/02/28     
+          v5.4.1 : 2025/03/27
+          v5.3.3 : 2025/04/04                
+        section 2025 Q2 <br> Bugfix Release Planning
+          v5.0.9 : 2025/05/16
+          v5.4.2 : 2025/06/30 
+        section 2025 Q3 <br> Bugfix Release Planning
+          v5.3.4 : 2025/08/03
+          v5.2.6 : 2025/09/04
+          v5.5.1 : 2025/09/11   
+          v5.4.3 : 2025/10/08
+        section 2025 Q4 <br> Bugfix Release Planning
+          v5.5.2 : 2025/11/12
+          v5.1.7 : 2026/01/06   
+```

ROADMAP_CN.md

@@ -0,0 +1,130 @@
+# ESP-IDF 项目路线图 2025
+
+* [English Version](./ROADMAP.md)
+
+本文档概述了 ESP-IDF 项目的年度计划，方便客户据此规划自己的项目周期。需要说明的是该文档并不是我们对客户的约束性承诺。相反，其主要目的是为客户提供 ESP-IDF 项目开发的路线图和方向。通过公开这些信息，我们希望增进客户对 ESP-IDF 项目的理解，提高透明度，并确保与 ESP-IDF 项目的总体目标保持一致。
+
+## 项目总览
+
+### 项目目标
+
+在 ESP-IDF 的主要版本和次要版本中，我们一般会增加对新芯片的支持，以扩展我们的产品线。通过扩展芯片矩阵，拓宽我们的产品范围，并满足广泛受众的各种需求。这样便能保证我们的产品始终处于技术进步的前沿，不断满足客户的需求并超越客户的期望。
+
+此外，ESP-IDF 各活跃分支的 Bugfix 版本发布也是我们项目的重中之重，着力提升已量产产品的稳定性和性能。通过及时解决问题，我们期待提升用户的整体体验，切实惠及使用乐鑫解决方案的客户。通过积极维护 ESP-IDF 的各活跃分支，我们践行了对宝贵的客户群提供可靠、高质量产品的承诺。
+
+以下是 ESP-IDF 项目在 2025 年计划实现的主要目标。
+
+* 新芯片支持
+
+	* 增加对 ESP32-C5 芯片的支持
+	* 增加对 ESP32-C61 芯片的支持
+
+* 发布更多的次要和主要版本
+
+	* 在 2025 年中发布 IDF v5.5 
+	* 在 2025 年底发布 IDF v6.0
+
+* 发布更多 bugfix 版本
+
+	* 在 2025 年 5 月底 IDF v5.0 停止维护之前，发布 IDF v5.0.8 和 IDF v5.0.9
+	* 在 2025 年 12 月底 IDF v5.1 停止维护之前，发布 IDF v5.1.6 和 IDF v5.1.7
+	* 在 release/5.2 分支和 release/5.3 分支进入维护周期之前，发布更多 bugfix 版本
+	* release/5.4 分支和 release/5.5 分支发布更多 bugfix 版本，使这两个分支更加稳定和产品化
+
+* 重大变更
+
+	* 我们计划在 IDF v6.0 中将 MbedTLS 版本升级到 v4.x。另外，我们还会在升级中迁移到更新版的 PSA 加密 API，但请注意，这可能会导致应用程序端在使用加密 API 时出现一些非兼容性更新。
+
+请注意，获取之前芯片的支持状态，请参阅 [ESP-IDF 发布和 SoC 兼容性](https://github.com/espressif/esp-idf/blob/master/README_CN.md#esp-idf-与乐鑫芯片)。
+
+### 路线图细节
+
+ESP-IDF 项目重视持续维护和更新，确保我们的客户始终处于技术进步的前沿。我们承诺持续进行开发，并将该领域的最新创新成果呈现给客户。
+
+此外，我们也在给客户赋能，客户通过迭代改进便能接触到新开发的功能和更高的性能。我们在突破技术界限方面的坚定承诺，使客户不仅能接触到最新的技术，还能从我们产品的尖端功能中获取最大价值。
+
+以下是 ESP-IDF 路线图的主要信息。
+
+* 新芯片支持
+
+	* 在 ESP-IDF v5.4 中为 ESP32-C5 提供预览支持，并在 ESP-IDF v5.5 中为 ESP32-C5 提供完整支持，参考 [ESP32-C5 支持状态](https://github.com/espressif/esp-idf/issues/14021)
+	* 在 ESP-IDF v5.4 中增加对 ESP32-C61 早期样品的预览支持，并在 IDF v5.5 中增加对 ESP32-C61 量产版本的完整支持，参考 [ESP32-C61 支持状态](https://developer.espressif.com/pages/chip-support-status/esp32c61/#esp-idf)
+
+* Bugfix 版本发布
+
+	* 发布 Bugfix 版本 IDF v5.0.8 和 IDF v5.0.9，并在 2025 年 5 月底停止维护 ESP-IDF v5.0
+	* 发布 Bugfix 版本 IDF v5.1.6 和 IDF v5.1.7，并在 2025 年 12 月底停止维护 ESP-IDF v5.1
+	* 发布 Bugfix 版本 IDF v5.2.4，IDF v5.2.5 和 IDF v5.2.6，release/5.2 分支自 2025 年 2 月进入维护周期
+	* 发布 Bugfix 版本 IDF v5.3.3 和 IDF v5.3.4，release/5.3 分支自 2025 年 7 月进入维护周期
+	* release/5.4 分支发布更多 bugfix 版本，包括 IDF v5.4.1、IDF v5.4.2、IDF v5.4.3；release/5.5 分支发布更多 bugfix 版本，包括 IDF v5.5.1、IDF v5.5.2。通过发布这些 Bugfix 版本，使 release/5.4 分支和 release/5.5 分支更加稳定和产品化。
+
+## ESP-IDF 发布计划
+
+获取 ESP-IDF 的完整发布列表，请访问 https://github.com/espressif/esp-idf/releases
+
+此处提供的所有信息均可因业务原因及其他因素而在没有通知的情况下进行更改。
+
+### ESP-IDF 主要版本发布
+
+```mermaid
+timeline
+
+        title ESP-IDF Major Releases
+        section 2025 Q1 <br> Major Release Planning
+          No version planned : N/A             
+        section 2025 Q2 <br> Major Release Planning
+          No version planned : N/A     
+        section 2025 Q3 <br> Major Release Planning
+          No version planned : N/A   
+        section 2025 Q4 <br> Major Release Planning
+          v6.0-beta1 : 2025/11/13
+          v6.0-beta2 : 2025/12/05
+          v6.0-RC1 : 2026/01/14   
+          v6.0-RC2 : 2026/02/06  
+          v6.0 : 2026/02/13   
+```
+  
+### ESP-IDF 次要版本发布
+
+```mermaid
+timeline
+
+        title ESP-IDF Minor Releases
+        section 2025 Q1 <br> Minor Release Planning
+          No version planned : N/A                
+        section 2025 Q2 <br> Minor Release Planning
+          v5.5-beta1 : 2025/05/14
+          v5.5-beta2 : 2025/06/04    
+        section 2025 Q3 <br> Minor Release Planning
+          v5.5-RC1 : 2025/07/07  
+          v5.5-RC2 : 2025/07/28  
+          v5.5 : 2025/08/04       
+        section 2025 Q4 <br> Minor Release Planning
+          No version planned : N/A   
+```
+
+### ESP-IDF Bugfix 版本发布
+
+```mermaid
+timeline
+
+        title ESP-IDF Bugfix Releases
+        section 2025 Q1 <br> Bugfix Release Planning
+          v5.0.8 : 2025/01/14
+          v5.1.6 : 2025/02/18
+          v5.2.4 : 2025/02/23
+          v5.2.5 : 2025/02/28         
+          v5.4.1 : 2025/03/27
+          v5.3.3 : 2025/04/04                
+        section 2025 Q2 <br> Bugfix Release Planning
+          v5.0.9 : 2025/05/16
+          v5.4.2 : 2025/06/30 
+        section 2025 Q3 <br> Bugfix Release Planning
+          v5.3.4 : 2025/08/03
+          v5.2.6 : 2025/09/04
+          v5.5.1 : 2025/09/11   
+          v5.4.3 : 2025/10/08
+        section 2025 Q4 <br> Bugfix Release Planning
+          v5.5.2 : 2025/11/12
+          v5.1.7 : 2026/01/06   
+```

components/app_trace/CMakeLists.txt

@@ -9,6 +9,11 @@ set(srcs
     "app_trace_util.c"
     "host_file_io.c")
 
+if(CONFIG_ESP_DEBUG_STUBS_ENABLE)
+    list(APPEND srcs
+        "debug_stubs.c")
+endif()
+
 if(CONFIG_APPTRACE_GCOV_ENABLE)
     if("${CMAKE_C_COMPILER_ID}" STREQUAL "GNU")
         list(APPEND srcs
@@ -55,16 +60,15 @@ endif()
 
 if(CONFIG_HEAP_TRACING_TOHOST)
     list(APPEND srcs "heap_trace_tohost.c")
-    set_source_files_properties(heap_trace_tohost.c
-        PROPERTIES COMPILE_FLAGS
-        -Wno-frame-address)
+    if(CONFIG_IDF_TARGET_ARCH_XTENSA)
+        set_source_files_properties(heap_trace_tohost.c PROPERTIES COMPILE_FLAGS -Wno-frame-address)
+    endif()
 endif()
 
 idf_component_register(SRCS "${srcs}"
                        INCLUDE_DIRS "${include_dirs}"
                        PRIV_INCLUDE_DIRS "${priv_include_dirs}"
-                       # Requires "driver" for GPTimer in "SEGGER_SYSVIEW_Config_FreeRTOS.c"
-                       PRIV_REQUIRES soc driver
+                       PRIV_REQUIRES esp_driver_gptimer esp_driver_gpio esp_driver_uart
                        REQUIRES esp_timer
                        LDFRAGMENTS linker.lf)
 
@@ -117,16 +121,3 @@ if(CONFIG_APPTRACE_GCOV_ENABLE)
 else()
     target_link_libraries(${COMPONENT_LIB} INTERFACE $<TARGET_FILE:${app_trace}> c)
 endif()
-
-# This function adds a dependency on the given component if the component is included into the build.
-function(maybe_add_component component_name)
-    idf_build_get_property(components BUILD_COMPONENTS)
-    if(${component_name} IN_LIST components)
-        idf_component_get_property(lib_name ${component_name} COMPONENT_LIB)
-        target_link_libraries(${COMPONENT_LIB} PUBLIC ${lib_name})
-    endif()
-endfunction()
-
-if(CONFIG_APPTRACE_DEST_UART0 OR CONFIG_APPTRACE_DEST_UART1 OR CONFIG_APPTRACE_DEST_UART2)
-    maybe_add_component(driver)
-endif()

components/app_trace/Kconfig

@@ -14,6 +14,7 @@ menu "Application Level Tracing"
 
         config APPTRACE_DEST_NONE
             bool "None"
+
     endchoice
 
     config APPTRACE_DEST_UART
@@ -60,7 +61,7 @@ menu "Application Level Tracing"
     endchoice
 
     config APPTRACE_UART_TX_GPIO
-        int "UART TX on GPIO#"
+        int "UART TX on GPIO<num>"
         depends on APPTRACE_DEST_UART_NOUSB
         range 0 46
         default 12 if IDF_TARGET_ESP32
@@ -70,7 +71,7 @@ menu "Application Level Tracing"
             This GPIO is used for UART TX pin.
 
     config APPTRACE_UART_RX_GPIO
-        int "UART RX on GPIO#"
+        int "UART RX on GPIO<num>"
         depends on APPTRACE_DEST_UART_NOUSB
         range 0 46
         default 13 if IDF_TARGET_ESP32
@@ -206,14 +207,14 @@ menu "Application Level Tracing"
             depends on APPTRACE_ENABLE
             default n
             help
-                Enables supporrt for SEGGER SystemView tracing functionality.
+                Enables support for SEGGER SystemView tracing functionality.
 
         choice APPTRACE_SV_DEST
             prompt "SystemView destination"
             depends on APPTRACE_SV_ENABLE
             default APPTRACE_SV_DEST_JTAG
             help
-                SystemView witt transfer data trough defined interface.
+                SystemView will transfer data through the defined interface.
 
             config APPTRACE_SV_DEST_JTAG
                 bool "Data destination JTAG"
@@ -231,7 +232,7 @@ menu "Application Level Tracing"
 
         choice APPTRACE_SV_CPU
             prompt "CPU to trace"
-            depends on APPTRACE_SV_DEST_UART && !FREERTOS_UNICORE
+            depends on APPTRACE_SV_DEST_UART && !ESP_SYSTEM_SINGLE_CORE_MODE
             default APPTRACE_SV_DEST_CPU_0
             help
                 Define the CPU to trace by SystemView.
@@ -252,8 +253,8 @@ menu "Application Level Tracing"
         choice APPTRACE_SV_TS_SOURCE
             prompt "Timer to use as timestamp source"
             depends on APPTRACE_SV_ENABLE
-            default APPTRACE_SV_TS_SOURCE_CCOUNT if FREERTOS_UNICORE && !PM_ENABLE && !IDF_TARGET_ESP32C3
-            default APPTRACE_SV_TS_SOURCE_GPTIMER if !FREERTOS_UNICORE && !PM_ENABLE && !IDF_TARGET_ESP32C3
+            default APPTRACE_SV_TS_SOURCE_CCOUNT if ESP_SYSTEM_SINGLE_CORE_MODE && !PM_ENABLE && !IDF_TARGET_ESP32C3
+            default APPTRACE_SV_TS_SOURCE_GPTIMER if !ESP_SYSTEM_SINGLE_CORE_MODE && !PM_ENABLE && !IDF_TARGET_ESP32C3
             default APPTRACE_SV_TS_SOURCE_ESP_TIMER if PM_ENABLE || IDF_TARGET_ESP32C3
             help
                 SystemView needs to use a hardware timer as the source of timestamps
@@ -261,7 +262,7 @@ menu "Application Level Tracing"
 
             config APPTRACE_SV_TS_SOURCE_CCOUNT
                 bool "CPU cycle counter (CCOUNT)"
-                depends on FREERTOS_UNICORE && !PM_ENABLE && !IDF_TARGET_ESP32C3
+                depends on ESP_SYSTEM_SINGLE_CORE_MODE && !PM_ENABLE && !IDF_TARGET_ESP32C3
 
             config APPTRACE_SV_TS_SOURCE_GPTIMER
                 bool "General Purpose Timer (Timer Group)"

components/app_trace/app_trace.c

@@ -1,7 +1,7 @@
 /*
- * SPDX-FileCopyrightText: 2017-2021 Espressif Systems (Shanghai) CO LTD
+ * SPDX-FileCopyrightText: 2017-2024 Espressif Systems (Shanghai) CO LTD
  *
- * SPDX-License-Identifier: Apache-2.0
+ * SPDX-License-Identifier: Apache-2.0 OR MIT
  */
 
 #include <string.h>
@@ -26,8 +26,6 @@
 #define ESP_APPTRACE_MAX_VPRINTF_ARGS 256
 #define ESP_APPTRACE_HOST_BUF_SIZE 256
 
-#define ESP_APPTRACE_PRINT_LOCK 0
-
 const static char *TAG = "esp_apptrace";
 
 /** tracing module internal data */
@@ -77,7 +75,7 @@ esp_err_t esp_apptrace_init(void)
     return ESP_OK;
 }
 
-ESP_SYSTEM_INIT_FN(esp_apptrace_init, ESP_SYSTEM_INIT_ALL_CORES, 115)
+ESP_SYSTEM_INIT_FN(esp_apptrace_init, SECONDARY, ESP_SYSTEM_INIT_ALL_CORES, 115)
 {
     return esp_apptrace_init();
 }
@@ -90,7 +88,7 @@ void esp_apptrace_down_buffer_config(uint8_t *buf, uint32_t size)
         return;
     }
     // currently down buffer is supported for JTAG interface only
-    // TODO: one more argument should be added to this function to specify HW inteface: JTAG, UART0 etc
+    // TODO: one more argument should be added to this function to specify HW interface: JTAG, UART0 etc
     ch = &s_trace_channels[ESP_APPTRACE_DEST_JTAG];
     if (ch->hw != NULL) {
         if (ch->hw->down_buffer_config != NULL) {
@@ -196,7 +194,7 @@ esp_err_t esp_apptrace_read(esp_apptrace_dest_t dest, void *buf, uint32_t *size,
     *size = 0;
     uint8_t *ptr = ch->hw->get_down_buffer(ch->hw_data, &act_sz, &tmo);
     if (ptr && act_sz > 0) {
-        ESP_APPTRACE_LOGD("Read %d bytes from host", act_sz);
+        ESP_APPTRACE_LOGD("Read %" PRIu32 " bytes from host", act_sz);
         memcpy(buf, ptr, act_sz);
         res = ch->hw->put_down_buffer(ch->hw_data, ptr, &tmo);
         *size = act_sz;
@@ -329,7 +327,7 @@ int esp_apptrace_vprintf_to(esp_apptrace_dest_t dest, uint32_t user_tmo, const c
     }
 
     esp_apptrace_tmo_init(&tmo, user_tmo);
-    ESP_APPTRACE_LOGD("fmt %x", fmt);
+    ESP_APPTRACE_LOGD("fmt %p", fmt);
     while ((p = (uint8_t *)strchr((char *)p, '%')) && nargs < ESP_APPTRACE_MAX_VPRINTF_ARGS) {
         p++;
         if (*p != '%' && *p != 0) {
@@ -355,7 +353,7 @@ int esp_apptrace_vprintf_to(esp_apptrace_dest_t dest, uint32_t user_tmo, const c
         uint32_t arg = va_arg(ap, uint32_t);
         *(uint32_t *)pout = arg;
         pout += sizeof(uint32_t);
-        ESP_APPTRACE_LOGD("arg %x", arg);
+        ESP_APPTRACE_LOGD("arg %" PRIx32, arg);
     }
 
     int ret = ch->hw->put_up_buffer(ch->hw_data, p, &tmo);

components/app_trace/app_trace_membufs_proto.c

@@ -1,7 +1,7 @@
 /*
- * SPDX-FileCopyrightText: 2021-2022 Espressif Systems (Shanghai) CO LTD
+ * SPDX-FileCopyrightText: 2021-2024 Espressif Systems (Shanghai) CO LTD
  *
- * SPDX-License-Identifier: Apache-2.0
+ * SPDX-License-Identifier: Apache-2.0 OR MIT
  */
 
 #include <sys/param.h>
@@ -100,7 +100,7 @@ static esp_err_t esp_apptrace_membufs_swap(esp_apptrace_membufs_proto_data_t *pr
     if (proto->hw->host_data_pending() && hdr->block_sz > 0) {
         // TODO: add support for multiple blocks from host, currently there is no need for that
         uint8_t *p = proto->blocks[new_block_num].start + proto->blocks[new_block_num].sz;
-        ESP_APPTRACE_LOGD("Recvd %d bytes from host (@ 0x%x) [%x %x %x %x %x %x %x %x .. %x %x %x %x %x %x %x %x]",
+        ESP_APPTRACE_LOGD("Recvd %" PRIu16 " bytes from host (@ %p) [%x %x %x %x %x %x %x %x .. %x %x %x %x %x %x %x %x]",
             hdr->block_sz, proto->blocks[new_block_num].start,
             *(proto->blocks[new_block_num].start+0), *(proto->blocks[new_block_num].start+1),
             *(proto->blocks[new_block_num].start+2), *(proto->blocks[new_block_num].start+3),
@@ -109,7 +109,7 @@ static esp_err_t esp_apptrace_membufs_swap(esp_apptrace_membufs_proto_data_t *pr
             *(p-8), *(p-7), *(p-6), *(p-5), *(p-4), *(p-3), *(p-2), *(p-1));
         uint32_t sz = esp_apptrace_membufs_down_buffer_write_nolock(proto, (uint8_t *)(hdr+1), hdr->block_sz);
         if (sz != hdr->block_sz) {
-            ESP_APPTRACE_LOGE("Failed to write %d bytes to down buffer (%d %d)!", hdr->block_sz - sz, hdr->block_sz, sz);
+            ESP_APPTRACE_LOGE("Failed to write %" PRIu32 " bytes to down buffer (%" PRIu16 " %" PRIu32 ")!", hdr->block_sz - sz, hdr->block_sz, sz);
         }
         hdr->block_sz = 0;
     }
@@ -196,7 +196,7 @@ static uint32_t esp_apptrace_membufs_down_buffer_write_nolock(esp_apptrace_membu
     uint32_t total_sz = 0;
 
     while (total_sz < size) {
-        ESP_APPTRACE_LOGD("esp_apptrace_trax_down_buffer_write_nolock WRS %d-%d-%d %d", proto->rb_down.wr, proto->rb_down.rd,
+        ESP_APPTRACE_LOGD("esp_apptrace_trax_down_buffer_write_nolock WRS %" PRIu32 "-%" PRIu32 "-%" PRIu32 " %" PRIu32, proto->rb_down.wr, proto->rb_down.rd,
             proto->rb_down.cur_size, size);
         uint32_t wr_sz = esp_apptrace_rb_write_size_get(&proto->rb_down);
         if (wr_sz == 0) {
@@ -206,15 +206,15 @@ static uint32_t esp_apptrace_membufs_down_buffer_write_nolock(esp_apptrace_membu
         if (wr_sz > size - total_sz) {
             wr_sz = size - total_sz;
         }
-        ESP_APPTRACE_LOGD("esp_apptrace_trax_down_buffer_write_nolock wr %d", wr_sz);
+        ESP_APPTRACE_LOGD("esp_apptrace_trax_down_buffer_write_nolock wr %" PRIu32, wr_sz);
         uint8_t *ptr = esp_apptrace_rb_produce(&proto->rb_down, wr_sz);
         if (!ptr) {
             assert(false && "Failed to produce bytes to down buffer!");
         }
-        ESP_APPTRACE_LOGD("esp_apptrace_trax_down_buffer_write_nolock wr %d to 0x%x from 0x%x", wr_sz, ptr, data + total_sz + wr_sz);
+        ESP_APPTRACE_LOGD("esp_apptrace_trax_down_buffer_write_nolock wr %" PRIu32 " to %p from %p", wr_sz, ptr, data + total_sz + wr_sz);
         memcpy(ptr, data + total_sz, wr_sz);
         total_sz += wr_sz;
-        ESP_APPTRACE_LOGD("esp_apptrace_trax_down_buffer_write_nolock wr %d/%d", wr_sz, total_sz);
+        ESP_APPTRACE_LOGD("esp_apptrace_trax_down_buffer_write_nolock wr %" PRIu32 "/%" PRIu32 "", wr_sz, total_sz);
     }
     return total_sz;
 }
@@ -278,7 +278,7 @@ uint8_t *esp_apptrace_membufs_up_buffer_get(esp_apptrace_membufs_proto_data_t *p
     uint8_t *buf_ptr = NULL;
 
     if (size > ESP_APPTRACE_USR_DATA_LEN_MAX(proto)) {
-        ESP_APPTRACE_LOGE("Too large user data size %d!", size);
+        ESP_APPTRACE_LOGE("Too large user data size %" PRIu32 "!", size);
         return NULL;
     }
 
@@ -308,21 +308,21 @@ uint8_t *esp_apptrace_membufs_up_buffer_get(esp_apptrace_membufs_proto_data_t *p
 #endif
         if (ESP_APPTRACE_INBLOCK_MARKER(proto) + ESP_APPTRACE_USR_BLOCK_RAW_SZ(size) > ESP_APPTRACE_INBLOCK(proto)->sz) {
             #if CONFIG_APPTRACE_PENDING_DATA_SIZE_MAX > 0
-            ESP_APPTRACE_LOGD("Block full. Get %d bytes from PEND buffer", size);
+            ESP_APPTRACE_LOGD("Block full. Get %" PRIu32 " bytes from PEND buffer", size);
             buf_ptr = esp_apptrace_rb_produce(&proto->rb_pend, ESP_APPTRACE_USR_BLOCK_RAW_SZ(size));
             #endif
             if (buf_ptr == NULL) {
                 int pended_buf;
-                ESP_APPTRACE_LOGD(" full. Get %d bytes from pend buffer", size);
+                ESP_APPTRACE_LOGD(" full. Get %" PRIu32 " bytes from pend buffer", size);
                 buf_ptr = esp_apptrace_membufs_wait4buf(proto, ESP_APPTRACE_USR_BLOCK_RAW_SZ(size), tmo, &pended_buf);
                 if (buf_ptr && !pended_buf) {
-                    ESP_APPTRACE_LOGD("Got %d bytes from block", size);
+                    ESP_APPTRACE_LOGD("Got %" PRIu32 " bytes from block", size);
                     // update cur block marker
                     ESP_APPTRACE_INBLOCK_MARKER_UPD(proto, ESP_APPTRACE_USR_BLOCK_RAW_SZ(size));
                 }
             }
         } else {
-            ESP_APPTRACE_LOGD("Get %d bytes from  buffer", size);
+            ESP_APPTRACE_LOGD("Get %" PRIu32 " bytes from  buffer", size);
             // fit to curr  nlock
             buf_ptr = ESP_APPTRACE_INBLOCK(proto)->start + ESP_APPTRACE_INBLOCK_MARKER(proto);
             // update cur block marker
@@ -352,12 +352,12 @@ esp_err_t esp_apptrace_membufs_flush_nolock(esp_apptrace_membufs_proto_data_t *p
     int res = ESP_OK;
 
     if (ESP_APPTRACE_INBLOCK_MARKER(proto) < min_sz) {
-        ESP_APPTRACE_LOGI("Ignore flush request for min %d bytes. Bytes in  block: %d.", min_sz, ESP_APPTRACE_INBLOCK_MARKER(proto));
+        ESP_APPTRACE_LOGI("Ignore flush request for min %" PRIu32 " bytes. Bytes in  block: %" PRIu32, min_sz, ESP_APPTRACE_INBLOCK_MARKER(proto));
         return ESP_OK;
     }
     // switch  block while size of data (including that in pending buffer) is more than min size
     while (ESP_APPTRACE_INBLOCK_MARKER(proto) > min_sz) {
-        ESP_APPTRACE_LOGD("Try to flush %d bytes. Wait until block switch for %lld us", ESP_APPTRACE_INBLOCK_MARKER(proto), tmo->tmo);
+        ESP_APPTRACE_LOGD("Try to flush %" PRIu32 " bytes. Wait until block switch for %" PRIi64 " us", ESP_APPTRACE_INBLOCK_MARKER(proto), tmo->tmo);
         res = esp_apptrace_membufs_swap_waitus(proto, tmo);
         if (res != ESP_OK) {
             if (tmo->tmo != ESP_APPTRACE_TMO_INFINITE)

components/app_trace/app_trace_util.c

@@ -1,7 +1,7 @@
 /*
- * SPDX-FileCopyrightText: 2017-2021 Espressif Systems (Shanghai) CO LTD
+ * SPDX-FileCopyrightText: 2017-2024 Espressif Systems (Shanghai) CO LTD
  *
- * SPDX-License-Identifier: Apache-2.0
+ * SPDX-License-Identifier: Apache-2.0 OR MIT
  */
 //
 #include "freertos/FreeRTOS.h"
@@ -9,12 +9,14 @@
 #include "esp_app_trace_util.h"
 #include "sdkconfig.h"
 
+#define ESP_APPTRACE_PRINT_LOCK 0
+
 ///////////////////////////////////////////////////////////////////////////////
 ///////////////////////////////// Locks /////////////////////////////////////
 ///////////////////////////////////////////////////////////////////////////////
 
 #if ESP_APPTRACE_PRINT_LOCK
-static esp_apptrace_lock_t s_log_lock = {.irq_stat = 0, .portmux = portMUX_INITIALIZER_UNLOCKED};
+static esp_apptrace_lock_t s_log_lock = { .mux = portMUX_INITIALIZER_UNLOCKED };
 #endif
 
 int esp_apptrace_log_lock(void)
@@ -31,7 +33,7 @@ int esp_apptrace_log_lock(void)
 
 void esp_apptrace_log_unlock(void)
 {
- #if ESP_APPTRACE_PRINT_LOCK
+#if ESP_APPTRACE_PRINT_LOCK
     esp_apptrace_lock_give(&s_log_lock);
 #endif
 }
@@ -87,7 +89,7 @@ esp_err_t esp_apptrace_lock_give(esp_apptrace_lock_t *lock)
 uint8_t *esp_apptrace_rb_produce(esp_apptrace_rb_t *rb, uint32_t size)
 {
     uint8_t *ptr = rb->data + rb->wr;
-    // check for avalable space
+    // check for available space
     if (rb->rd <= rb->wr) {
         // |?R......W??|
         if (rb->wr + size >= rb->size) {

components/app_trace/debug_stubs.c

@@ -8,7 +8,8 @@
 // Currently one stub is used for GCOV functionality
 //
 
-#include "esp_private/dbg_stubs.h"
+#include "esp_private/startup_internal.h"
+#include "dbg_stubs.h"
 #include "esp_attr.h"
 
 /*
@@ -27,7 +28,7 @@ const static char *TAG = "esp_dbg_stubs";
 #define ESP_DBG_STUBS_CODE_BUF_SIZE         32
 #define ESP_DBG_STUBS_STACK_MIN_SIZE        2048
 
-#define DBG_STUB_TRAMP_ATTR					IRAM_ATTR
+#define DBG_STUB_TRAMP_ATTR                 IRAM_ATTR
 
 static struct {
     uint32_t    tramp_addr;
@@ -46,7 +47,7 @@ extern void esp_dbg_stubs_ll_init(void *stub_table_addr);
 static void * esp_dbg_stubs_data_alloc(uint32_t size)
 {
     ESP_LOGV(TAG, "%s %"PRIu32, __func__, size);
-	void *p = malloc(size);
+    void *p = malloc(size);
     ESP_LOGV(TAG, "%s EXIT %p", __func__, p);
     return p;
 }
@@ -92,3 +93,9 @@ esp_err_t esp_dbg_stub_entry_get(esp_dbg_stub_id_t id, uint32_t *entry)
 
     return ESP_OK;
 }
+
+ESP_SYSTEM_INIT_FN(init_dbg_stubs, SECONDARY, BIT(0), 140)
+{
+    esp_dbg_stubs_init();
+    return ESP_OK;
+}

components/app_trace/gcov/gcov_rtio.c

@@ -1,5 +1,5 @@
 /*
- * SPDX-FileCopyrightText: 2017-2023 Espressif Systems (Shanghai) CO LTD
+ * SPDX-FileCopyrightText: 2017-2024 Espressif Systems (Shanghai) CO LTD
  *
  * SPDX-License-Identifier: Apache-2.0
  */
@@ -14,14 +14,10 @@
 #include "soc/timer_periph.h"
 #include "esp_app_trace.h"
 #include "esp_freertos_hooks.h"
-#include "esp_private/dbg_stubs.h"
-#include "esp_ipc.h"
+#include "dbg_stubs.h"
+#include "esp_private/esp_ipc.h"
+#include "esp_attr.h"
 #include "hal/wdt_hal.h"
-#if CONFIG_IDF_TARGET_ESP32
-#include "esp32/rom/libc_stubs.h"
-#elif CONFIG_IDF_TARGET_ESP32S2
-#include "esp32s2/rom/libc_stubs.h"
-#endif
 
 #if CONFIG_APPTRACE_GCOV_ENABLE
 
@@ -80,11 +76,11 @@ void gcov_create_task(void *arg)
 		(void *)&s_gcov_task_running, configMAX_PRIORITIES - 1, NULL, 0);
 }
 
+static IRAM_ATTR
 void gcov_create_task_tick_hook(void)
 {
-    extern esp_err_t esp_ipc_start_gcov_from_isr(uint32_t cpu_id, esp_ipc_func_t func, void* arg);
     if (s_create_gcov_task) {
-        if (esp_ipc_start_gcov_from_isr(xPortGetCoreID(), &gcov_create_task, NULL) == ESP_OK) {
+        if (esp_ipc_call_nonblocking(xPortGetCoreID(), &gcov_create_task, NULL) == ESP_OK) {
             s_create_gcov_task = false;
         }
     }
@@ -106,12 +102,16 @@ static int esp_dbg_stub_gcov_entry(void)
 
 void gcov_rtio_init(void)
 {
-    uint32_t capabilities = 0;
+    uint32_t stub_entry = 0;
     ESP_EARLY_LOGV(TAG, "%s", __FUNCTION__);
-    esp_dbg_stub_entry_set(ESP_DBG_STUB_ENTRY_GCOV, (uint32_t)&esp_dbg_stub_gcov_entry);
-    if (esp_dbg_stub_entry_get(ESP_DBG_STUB_ENTRY_CAPABILITIES, &capabilities) == ESP_OK) {
-        esp_dbg_stub_entry_set(ESP_DBG_STUB_ENTRY_CAPABILITIES, capabilities | ESP_DBG_STUB_CAP_GCOV_TASK);
+    assert(esp_dbg_stub_entry_get(ESP_DBG_STUB_ENTRY_GCOV, &stub_entry) == ESP_OK);
+    if (stub_entry != 0) {
+        /* "__gcov_init()" can be called several times. We must avoid multiple tick hook registration */
+        return;
     }
+    esp_dbg_stub_entry_set(ESP_DBG_STUB_ENTRY_GCOV, (uint32_t)&esp_dbg_stub_gcov_entry);
+    assert(esp_dbg_stub_entry_get(ESP_DBG_STUB_ENTRY_CAPABILITIES, &stub_entry) == ESP_OK);
+    esp_dbg_stub_entry_set(ESP_DBG_STUB_ENTRY_CAPABILITIES, stub_entry | ESP_DBG_STUB_CAP_GCOV_TASK);
     esp_register_freertos_tick_hook(gcov_create_task_tick_hook);
 }
 

components/app_trace/heap_trace_tohost.c

@@ -1,13 +1,11 @@
 /*
- * SPDX-FileCopyrightText: 2015-2022 Espressif Systems (Shanghai) CO LTD
+ * SPDX-FileCopyrightText: 2015-2024 Espressif Systems (Shanghai) CO LTD
  *
  * SPDX-License-Identifier: Apache-2.0
  */
-#include <sdkconfig.h>
+#include "sdkconfig.h"
 
-#define HEAP_TRACE_SRCFILE /* don't warn on inclusion here */
 #include "esp_heap_trace.h"
-#undef HEAP_TRACE_SRCFILE
 #include "esp_heap_caps.h"
 #if CONFIG_APPTRACE_SV_ENABLE
 #include "esp_app_trace.h"
@@ -16,7 +14,7 @@
 
 #define STACK_DEPTH CONFIG_HEAP_TRACING_STACK_DEPTH
 
-#ifdef CONFIG_HEAP_TRACING_TOHOST
+#if CONFIG_HEAP_TRACING_TOHOST
 
 #if !CONFIG_APPTRACE_SV_ENABLE
 #error None of the heap tracing backends is enabled! You must enable SystemView compatible tracing to use this feature.

components/app_trace/host_file_io.c

@@ -122,7 +122,7 @@ static esp_err_t esp_apptrace_file_rsp_recv(esp_apptrace_dest_t dest, uint8_t *b
             ESP_EARLY_LOGE(TAG, "Failed to read (%d)!", ret);
             return ret;
         }
-        ESP_EARLY_LOGV(TAG, "%s read %d bytes", __FUNCTION__, rd_size);
+        ESP_EARLY_LOGV(TAG, "%s read %" PRIu32 " bytes", __FUNCTION__, rd_size);
         tot_rd += rd_size;
     }
 

components/app_trace/linker.lf

@@ -15,9 +15,9 @@ entries:
       SEGGER_SYSVIEW_FreeRTOS (noflash)
 
 [mapping:app_trace_driver]
-archive: libdriver.a
+archive: libesp_driver_gptimer.a
 entries:
     if APPTRACE_SV_TS_SOURCE_GPTIMER = y:
-      gptimer (noflash)
+      gptimer: gptimer_get_raw_count (noflash)
     else:
       * (default)

components/app_trace/port/port_uart.c

@@ -1,5 +1,5 @@
 /*
- * SPDX-FileCopyrightText: 2017-2021 Espressif Systems (Shanghai) CO LTD
+ * SPDX-FileCopyrightText: 2017-2024 Espressif Systems (Shanghai) CO LTD
  *
  * SPDX-License-Identifier: Apache-2.0
  */
@@ -218,6 +218,13 @@ static esp_err_t esp_apptrace_uart_init(esp_apptrace_uart_data_t *hw_data)
         hw_data->message_buff_overflow = false;
         hw_data->circular_buff_overflow = false;
 
+        assert((hw_data->port_num <= SOC_UART_NUM) && "Not possible to configure UART. Please check selected UART port");
+
+        int source_clk = UART_SCLK_DEFAULT;
+#if SOC_UART_LP_NUM > 0
+        if (hw_data->port_num >= SOC_UART_HP_NUM)
+            source_clk = LP_UART_SCLK_DEFAULT;
+#endif
 
         const uart_config_t uart_config = {
             .baud_rate = CONFIG_APPTRACE_UART_BAUDRATE,
@@ -225,7 +232,7 @@ static esp_err_t esp_apptrace_uart_init(esp_apptrace_uart_data_t *hw_data)
             .parity = UART_PARITY_DISABLE,
             .stop_bits = UART_STOP_BITS_1,
             .flow_ctrl = UART_HW_FLOWCTRL_DISABLE,
-            .source_clk = UART_SCLK_DEFAULT,
+            .source_clk = source_clk,
         };
         ESP_LOGI(TAG, "UART baud rate: %i", CONFIG_APPTRACE_UART_BAUDRATE);
         // We won't use a buffer for sending data.

components/app_trace/port/riscv/port.c

@@ -1,9 +1,10 @@
 /*
- * SPDX-FileCopyrightText: 2021-2022 Espressif Systems (Shanghai) CO LTD
+ * SPDX-FileCopyrightText: 2021-2024 Espressif Systems (Shanghai) CO LTD
  *
- * SPDX-License-Identifier: Apache-2.0
+ * SPDX-License-Identifier: Apache-2.0 OR MIT
  */
 
+#include "sdkconfig.h"
 #include "esp_cpu.h"
 #include "esp_log.h"
 #include "esp_app_trace_membufs_proto.h"
@@ -56,7 +57,13 @@ static bool esp_apptrace_riscv_host_data_pending(void);
 
 const static char *TAG = "esp_apptrace";
 
-static esp_apptrace_riscv_ctrl_block_t s_tracing_ctrl[portNUM_PROCESSORS];
+#if SOC_CACHE_INTERNAL_MEM_VIA_L1CACHE
+#define APPTRACE_DRAM_ATTR TCM_DRAM_ATTR
+#else
+#define APPTRACE_DRAM_ATTR
+#endif
+
+static APPTRACE_DRAM_ATTR esp_apptrace_riscv_ctrl_block_t s_tracing_ctrl[CONFIG_FREERTOS_NUMBER_OF_CORES];
 
 esp_apptrace_hw_t *esp_apptrace_jtag_hw_get(void **data)
 {
@@ -91,7 +98,7 @@ esp_apptrace_hw_t *esp_apptrace_jtag_hw_get(void **data)
 }
 
 /* Advertises apptrace control block address to host.
-   This function can be overriden with custom implementation,
+   This function can be overridden with custom implementation,
    e.g. OpenOCD flasher stub use own implementation of it. */
 __attribute__((weak)) int esp_apptrace_advertise_ctrl_block(void *ctrl_block_addr)
 {
@@ -102,7 +109,7 @@ __attribute__((weak)) int esp_apptrace_advertise_ctrl_block(void *ctrl_block_add
 }
 
 /* Returns up buffers config.
-   This function can be overriden with custom implementation,
+   This function can be overridden with custom implementation,
    e.g. OpenOCD flasher stub use own implementation of it. */
 __attribute__((weak)) void esp_apptrace_get_up_buffers(esp_apptrace_mem_block_t mem_blocks_cfg[2])
 {
@@ -158,13 +165,13 @@ static esp_err_t esp_apptrace_riscv_init(esp_apptrace_riscv_data_t *hw_data)
     ESP_APPTRACE_LOGI("Apptrace initialized on CPU%d. Tracing control block @ %p.", core_id, &s_tracing_ctrl[core_id]);
     s_tracing_ctrl[core_id].mem_blocks = hw_data->membufs.blocks;
     for (int i = 0; i < 2; i++) {
-        ESP_APPTRACE_LOGD("Mem buf[%d] %d bytes @ %p (%p/%p)", i,
+        ESP_APPTRACE_LOGD("Mem buf[%d] %" PRIu32 " bytes @ %p (%p/%p)", i,
             s_tracing_ctrl[core_id].mem_blocks[i].sz, s_tracing_ctrl[core_id].mem_blocks[i].start,
             &(s_tracing_ctrl[core_id].mem_blocks[i].start), &(s_tracing_ctrl[core_id].mem_blocks[i].sz));
     }
     // notify host about control block address
     int res = esp_apptrace_advertise_ctrl_block(&s_tracing_ctrl[core_id]);
-    assert(res == 0 && "Falied to send config to host!");
+    assert(res == 0 && "Failed to send config to host!");
 
     return ESP_OK;
 }
@@ -324,7 +331,7 @@ static esp_err_t esp_apptrace_riscv_buffer_swap_start(uint32_t curr_block_id)
         uint32_t acked_block = ESP_APPTRACE_RISCV_BLOCK_ID_GET(ctrl_reg);
         uint32_t host_to_read = ESP_APPTRACE_RISCV_BLOCK_LEN_GET(ctrl_reg);
         if (host_to_read != 0 || acked_block != (curr_block_id & ESP_APPTRACE_RISCV_BLOCK_ID_MSK)) {
-            ESP_APPTRACE_LOGD("[%d]: Can not switch %x %d %x %x/%lx", esp_cpu_get_core_id(), ctrl_reg, host_to_read, acked_block,
+            ESP_APPTRACE_LOGD("[%d]: Can not switch %" PRIx32 " %" PRIu32 " %" PRIx32 " %" PRIx32 "/%" PRIx32, esp_cpu_get_core_id(), ctrl_reg, host_to_read, acked_block,
                 curr_block_id & ESP_APPTRACE_RISCV_BLOCK_ID_MSK, curr_block_id);
             res = ESP_ERR_NO_MEM;
             goto _on_err;

components/app_trace/port/xtensa/port.c

@@ -1,7 +1,7 @@
 /*
- * SPDX-FileCopyrightText: 2015-2021 Espressif Systems (Shanghai) CO LTD
+ * SPDX-FileCopyrightText: 2015-2024 Espressif Systems (Shanghai) CO LTD
  *
- * SPDX-License-Identifier: Apache-2.0
+ * SPDX-License-Identifier: Apache-2.0 OR MIT
  */
 
 //
@@ -288,7 +288,7 @@ static inline void esp_apptrace_trax_select_memory_block(int block_num)
                         : TRACEMEM_CORE0_MUX_BLK_BITS(TRACEMEM_MUX_BLK1_NUM);
     block_bits |= block_num ? TRACEMEM_CORE1_MUX_BLK_BITS(TRACEMEM_MUX_BLK0_NUM)
                         : TRACEMEM_CORE1_MUX_BLK_BITS(TRACEMEM_MUX_BLK1_NUM);
-    ESP_EARLY_LOGV(TAG, "Select block %d @ %p (bits 0x%x)", block_num, s_trax_blocks[block_num], block_bits);
+    ESP_EARLY_LOGV(TAG, "Select block %d @ %p (bits 0x%" PRIx32 ")", block_num, s_trax_blocks[block_num], block_bits);
     DPORT_WRITE_PERI_REG(SENSITIVE_INTERNAL_SRAM_USAGE_2_REG, block_bits);
 #endif
 }
@@ -298,7 +298,7 @@ static inline void esp_apptrace_trax_memory_enable(void)
 #if CONFIG_IDF_TARGET_ESP32
         /* Enable trace memory on PRO CPU */
         DPORT_WRITE_PERI_REG(DPORT_PRO_TRACEMEM_ENA_REG, DPORT_PRO_TRACEMEM_ENA_M);
-#if CONFIG_FREERTOS_UNICORE == 0
+#if CONFIG_ESP_SYSTEM_SINGLE_CORE_MODE == 0
         /* Enable trace memory on APP CPU */
         DPORT_WRITE_PERI_REG(DPORT_APP_TRACEMEM_ENA_REG, DPORT_APP_TRACEMEM_ENA_M);
 #endif
@@ -498,7 +498,7 @@ static esp_err_t esp_apptrace_trax_buffer_swap_start(uint32_t curr_block_id)
         uint32_t acked_block = ESP_APPTRACE_TRAX_BLOCK_ID_GET(ctrl_reg);
         uint32_t host_to_read = ESP_APPTRACE_TRAX_BLOCK_LEN_GET(ctrl_reg);
         if (host_to_read != 0 || acked_block != (curr_block_id & ESP_APPTRACE_TRAX_BLOCK_ID_MSK)) {
-            ESP_APPTRACE_LOGD("HC[%d]: Can not switch %x %d %x %x/%lx", esp_cpu_get_core_id(), ctrl_reg, host_to_read, acked_block,
+            ESP_APPTRACE_LOGD("HC[%d]: Can not switch %" PRIx32 " %" PRIu32 " %" PRIx32 " %" PRIx32 "/%" PRIx32, esp_cpu_get_core_id(), ctrl_reg, host_to_read, acked_block,
                 curr_block_id & ESP_APPTRACE_TRAX_BLOCK_ID_MSK, curr_block_id);
             res = ESP_ERR_NO_MEM;
             goto _on_err;

components/app_trace/private_include/dbg_stubs.h

@@ -0,0 +1,69 @@
+/*
+ * SPDX-FileCopyrightText: 2017-2024 Espressif Systems (Shanghai) CO LTD
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+#ifndef ESP_DBG_STUBS_H_
+#define ESP_DBG_STUBS_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "esp_err.h"
+
+/**
+ * Debug stubs entries IDs
+ */
+typedef enum {
+    ESP_DBG_STUB_MAGIC_NUM,
+    ESP_DBG_STUB_TABLE_SIZE,
+    ESP_DBG_STUB_CONTROL_DATA,   ///< stubs descriptor entry
+    ESP_DBG_STUB_ENTRY_FIRST,
+    ESP_DBG_STUB_ENTRY_GCOV ///< GCOV entry
+    = ESP_DBG_STUB_ENTRY_FIRST,
+    ESP_DBG_STUB_ENTRY_CAPABILITIES,
+    ESP_DBG_STUB_ENTRY_MAX
+} esp_dbg_stub_id_t;
+
+#define ESP_DBG_STUB_MAGIC_NUM_VAL      0xFEEDBEEF
+#define ESP_DBG_STUB_CAP_GCOV_TASK      (1 << 0)
+
+/**
+ * @brief  Initializes debug stubs.
+ *
+ * @note   Must be called after esp_apptrace_init() if app tracing is enabled.
+ */
+void esp_dbg_stubs_init(void);
+
+/**
+ * @brief  Initializes application tracing module.
+ *
+ * @note   Should be called before any esp_apptrace_xxx call.
+ *
+ * @param id    Stub ID.
+ * @param entry Stub entry. Usually it is stub entry function address,
+ *              but can be any value meaningfull for OpenOCD command/code
+ *              such as capabilities
+ * @return ESP_OK on success, otherwise see esp_err_t
+ */
+esp_err_t esp_dbg_stub_entry_set(esp_dbg_stub_id_t id, uint32_t entry);
+
+/**
+ * @brief   Retrives the corresponding stub entry
+ *
+ * @param id    Stub ID.
+ * @param entry Stub entry. Usually it is stub entry function address,
+ *              but can be any value meaningfull for OpenOCD command/code
+ *              such as capabilities
+ *
+ * @return ESP_OK on success, otherwise see esp_err_t
+ */
+esp_err_t esp_dbg_stub_entry_get(esp_dbg_stub_id_t id, uint32_t *entry);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif // ESP_DBG_STUBS_H_

components/app_trace/project_include.cmake

@@ -5,21 +5,25 @@ function(idf_create_coverage_report report_dir)
     set(gcov_tool ${_CMAKE_TOOLCHAIN_PREFIX}gcov)
     idf_build_get_property(project_name PROJECT_NAME)
 
+    file(TO_NATIVE_PATH "${report_dir}" _report_dir)
+    file(TO_NATIVE_PATH "${project_dir}" _project_dir)
+    file(TO_NATIVE_PATH "${report_dir}/html/index.html" _index_path)
+
     add_custom_target(pre-cov-report
-        COMMENT "Generating coverage report in: ${report_dir}"
+        COMMENT "Generating coverage report in: ${_report_dir}"
         COMMAND ${CMAKE_COMMAND} -E echo "Using gcov: ${gcov_tool}"
-        COMMAND ${CMAKE_COMMAND} -E make_directory ${report_dir}/html
+        COMMAND ${CMAKE_COMMAND} -E make_directory ${_report_dir}/html
         )
 
     add_custom_target(lcov-report
         COMMENT "WARNING: lcov-report is deprecated. Please use gcovr-report instead."
-        COMMAND lcov --gcov-tool ${gcov_tool} -c -d ${CMAKE_CURRENT_BINARY_DIR} -o ${report_dir}/${project_name}.info
-        COMMAND genhtml -o ${report_dir}/html ${report_dir}/${project_name}.info
+        COMMAND lcov --gcov-tool ${gcov_tool} -c -d ${CMAKE_CURRENT_BINARY_DIR} -o ${_report_dir}/${project_name}.info
+        COMMAND genhtml -o ${_report_dir}/html ${_report_dir}/${project_name}.info
         DEPENDS pre-cov-report
         )
 
     add_custom_target(gcovr-report
-        COMMAND gcovr -r ${project_dir} --gcov-executable ${gcov_tool} -s --html-details ${report_dir}/html/index.html
+        COMMAND gcovr -r ${_project_dir} --gcov-executable ${gcov_tool} -s --html-details ${_index_path}
         WORKING_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}
         DEPENDS pre-cov-report
         )
@@ -29,7 +33,9 @@ endfunction()
 #
 # Clean coverage report.
 function(idf_clean_coverage_report report_dir)
+    file(TO_CMAKE_PATH "${report_dir}" _report_dir)
+
     add_custom_target(cov-data-clean
-        COMMENT "Clean coverage report in: ${report_dir}"
-        COMMAND ${CMAKE_COMMAND} -E remove_directory ${report_dir})
+        COMMENT "Clean coverage report in: ${_report_dir}"
+        COMMAND ${CMAKE_COMMAND} -E remove_directory ${_report_dir})
 endfunction()

components/app_trace/sys_view/SEGGER/SEGGER.h

@@ -10,7 +10,7 @@
 *                        The Embedded Experts                        *
 **********************************************************************
 *                                                                    *
-*            (c) 1995 - 2021 SEGGER Microcontroller GmbH             *
+*            (c) 1995 - 2024 SEGGER Microcontroller GmbH             *
 *                                                                    *
 *       www.segger.com     Support: support@segger.com               *
 *                                                                    *
@@ -49,7 +49,7 @@
 *                                                                    *
 **********************************************************************
 *                                                                    *
-*       SystemView version: 3.42                                    *
+*       SystemView version: 3.56                                    *
 *                                                                    *
 **********************************************************************
 ----------------------------------------------------------------------

components/app_trace/sys_view/SEGGER/SEGGER_RTT.h

@@ -8,7 +8,7 @@
 *                        The Embedded Experts                        *
 **********************************************************************
 *                                                                    *
-*            (c) 1995 - 2021 SEGGER Microcontroller GmbH             *
+*            (c) 1995 - 2024 SEGGER Microcontroller GmbH             *
 *                                                                    *
 *       www.segger.com     Support: support@segger.com               *
 *                                                                    *
@@ -47,7 +47,7 @@
 *                                                                    *
 **********************************************************************
 *                                                                    *
-*       SystemView version: 3.42                                    *
+*       SystemView version: 3.56                                    *
 *                                                                    *
 **********************************************************************
 ---------------------------END-OF-HEADER------------------------------
@@ -100,6 +100,10 @@ Revision: $Rev: 25842 $
       #define _CORE_HAS_RTT_ASM_SUPPORT 1
       #define _CORE_NEEDS_DMB           1
       #define RTT__DMB() __asm volatile ("dmb\n" : : :);
+    #elif (defined(__ARM_ARCH_8_1M_MAIN__))       // Cortex-M85
+      #define _CORE_HAS_RTT_ASM_SUPPORT 1
+      #define _CORE_NEEDS_DMB           1
+      #define RTT__DMB() __asm volatile ("dmb\n" : : :);
     #else
       #define _CORE_HAS_RTT_ASM_SUPPORT 0
     #endif
@@ -130,6 +134,10 @@ Revision: $Rev: 25842 $
       #define _CORE_HAS_RTT_ASM_SUPPORT 1
       #define _CORE_NEEDS_DMB           1
       #define RTT__DMB() __asm volatile ("dmb\n" : : :);
+    #elif (defined __ARM_ARCH_8_1M_MAIN__)        // Cortex-M85
+      #define _CORE_HAS_RTT_ASM_SUPPORT 1
+      #define _CORE_NEEDS_DMB           1
+      #define RTT__DMB() __asm volatile ("dmb\n" : : :);
     #elif ((defined __ARM_ARCH_7A__) || (defined __ARM_ARCH_7R__))  // Cortex-A/R 32-bit ARMv7-A/R
       #define _CORE_NEEDS_DMB           1
       #define RTT__DMB() __asm volatile ("dmb\n" : : :);
@@ -156,6 +164,10 @@ Revision: $Rev: 25842 $
       #define _CORE_HAS_RTT_ASM_SUPPORT 1
       #define _CORE_NEEDS_DMB           1
       #define RTT__DMB() __asm volatile ("dmb\n" : : :);
+    #elif (defined __ARM_ARCH_8_1M_MAIN__)        // Cortex-M85
+      #define _CORE_HAS_RTT_ASM_SUPPORT 1
+      #define _CORE_NEEDS_DMB           1
+      #define RTT__DMB() __asm volatile ("dmb\n" : : :);
     #elif ((defined __ARM_ARCH_7A__) || (defined __ARM_ARCH_7R__))  // Cortex-A/R 32-bit ARMv7-A/R
       #define _CORE_NEEDS_DMB           1
       #define RTT__DMB() __asm volatile ("dmb\n" : : :);
@@ -271,6 +283,7 @@ Revision: $Rev: 25842 $
 #ifndef SEGGER_RTT_ASM  // defined when SEGGER_RTT.h is included from assembly file
 #include <stdlib.h>
 #include <stdarg.h>
+#include <stdint.h>
 
 /*********************************************************************
 *
@@ -412,7 +425,7 @@ unsigned     SEGGER_RTT_ReadUpBufferNoLock      (unsigned BufferIndex, void* pDa
 unsigned     SEGGER_RTT_WriteDownBuffer         (unsigned BufferIndex, const void* pBuffer, unsigned NumBytes);
 unsigned     SEGGER_RTT_WriteDownBufferNoLock   (unsigned BufferIndex, const void* pBuffer, unsigned NumBytes);
 
-#define      SEGGER_RTT_HASDATA_UP(n)    (((SEGGER_RTT_BUFFER_UP*)((char*)&_SEGGER_RTT.aUp[n] + SEGGER_RTT_UNCACHED_OFF))->WrOff - ((SEGGER_RTT_BUFFER_UP*)((char*)&_SEGGER_RTT.aUp[n] + SEGGER_RTT_UNCACHED_OFF))->RdOff)   // Access uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly
+#define      SEGGER_RTT_HASDATA_UP(n)    (((SEGGER_RTT_BUFFER_UP*)((uintptr_t)&_SEGGER_RTT.aUp[n] + SEGGER_RTT_UNCACHED_OFF))->WrOff - ((SEGGER_RTT_BUFFER_UP*)((uintptr_t)&_SEGGER_RTT.aUp[n] + SEGGER_RTT_UNCACHED_OFF))->RdOff)   // Access uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly
 
 /*********************************************************************
 *

components/app_trace/sys_view/SEGGER/SEGGER_SYSVIEW.c

@@ -3,14 +3,14 @@
  *
  * SPDX-License-Identifier: BSD-1-Clause
  *
- * SPDX-FileContributor: 2023 Espressif Systems (Shanghai) CO LTD
+ * SPDX-FileContributor: 2023-2024 Espressif Systems (Shanghai) CO LTD
  */
 /*********************************************************************
 *                    SEGGER Microcontroller GmbH                     *
 *                        The Embedded Experts                        *
 **********************************************************************
 *                                                                    *
-*            (c) 1995 - 2021 SEGGER Microcontroller GmbH             *
+*            (c) 1995 - 2024 SEGGER Microcontroller GmbH             *
 *                                                                    *
 *       www.segger.com     Support: support@segger.com               *
 *                                                                    *
@@ -49,14 +49,14 @@
 *                                                                    *
 **********************************************************************
 *                                                                    *
-*       SystemView version: 3.42                                    *
+*       SystemView version: 3.56                                    *
 *                                                                    *
 **********************************************************************
 -------------------------- END-OF-HEADER -----------------------------
 
 File    : SEGGER_SYSVIEW.c
 Purpose : System visualization API implementation.
-Revision: $Rev: 28341 $
+Revision: $Rev: 29105 $
 
 Additional information:
   Packet format:
@@ -66,10 +66,10 @@ Additional information:
 
     Packets with IDs 24..31 are standard packets with extendible
     structure and contain a length field.
-    <ID><Lenght><Data><TimeStampDelta>
+    <ID><Length><Data><TimeStampDelta>
 
     Packet ID 31 is used for SystemView extended events.
-    <ID><Lenght><ID_EX><Data><TimeStampDelta>
+    <ID><Length><ID_EX><Data><TimeStampDelta>
 
     Packets with IDs >= 32 always contain a length field.
     <ID><Length><Data><TimeStampDelta>
@@ -150,6 +150,7 @@ Additional information:
 #include <string.h>
 #include <stdlib.h>
 #include <stdarg.h>
+#include <assert.h>
 #include "SEGGER_SYSVIEW_Int.h"
 #include "SEGGER_RTT.h"
 
@@ -188,7 +189,7 @@ Additional information:
 // Timestamps may be less than full 32-bits, in which case we need to zero
 // the unused bits to properly handle overflows.
 // Note that this is a quite common scenario, as a 32-bit time such as
-// SysTick might be scaled down to reduce bandwith
+// SysTick might be scaled down to reduce bandwidth
 // or a 16-bit hardware time might be used.
 #if SEGGER_SYSVIEW_TIMESTAMP_BITS < 32  // Eliminate unused bits in case hardware timestamps are less than 32 bits
   #define MAKE_DELTA_32BIT(Delta) Delta <<= 32 - SEGGER_SYSVIEW_TIMESTAMP_BITS; \
@@ -388,8 +389,6 @@ static U8                     _NumModules;
                                    pDest = pSysviewPointer;                         \
                                  };
 
-
-
 #if (SEGGER_SYSVIEW_USE_STATIC_BUFFER == 1)
 static U8 _aPacket[SEGGER_SYSVIEW_MAX_PACKET_SIZE];
 
@@ -432,6 +431,9 @@ static U8 _aPacket[SEGGER_SYSVIEW_MAX_PACKET_SIZE];
 static U8* _EncodeData(U8* pPayload, const char* pSrc, unsigned int NumBytes) {
   unsigned int  n;
   const U8*     p;
+
+  // Espressif doesn't support larger packages yet. Encode data length must be less than 255.
+  assert(NumBytes < 255);
   //
   n = 0;
   p = (const U8*)pSrc;
@@ -442,8 +444,8 @@ static U8* _EncodeData(U8* pPayload, const char* pSrc, unsigned int NumBytes) {
     *pPayload++ = (U8)NumBytes;
   } else {
     *pPayload++ = 255;
-    *pPayload++ = (NumBytes & 255);
     *pPayload++ = ((NumBytes >> 8) & 255);
+    *pPayload++ = (NumBytes & 255);
   }
   while (n < NumBytes) {
     *pPayload++ = *p++;
@@ -452,6 +454,38 @@ static U8* _EncodeData(U8* pPayload, const char* pSrc, unsigned int NumBytes) {
   return pPayload;
 }
 
+/*********************************************************************
+*
+*       _EncodeFloat()
+*
+*  Function description
+*    Encode a float value in variable-length format.
+*
+*  Parameters
+*    pPayload - Pointer to where value will be encoded.
+*    Value    - Value to be encoded.
+*
+*  Return value
+*    Pointer to the byte following the value, i.e. the first free
+*    byte in the payload and the next position to store payload
+*    content.
+*/
+static U8* _EncodeFloat(U8* pPayload, float Value) {
+   float Val = Value;
+   U8* pSysviewPointer;
+   U32* SysViewData;
+   pSysviewPointer = pPayload;
+   SysViewData = (U32*)&Val;
+   while((*SysViewData) > 0x7F) {
+     *pSysviewPointer++ = (U8)((*SysViewData) | 0x80);
+     (*SysViewData) >>= 7;
+   };
+   *pSysviewPointer++ = (U8)(*SysViewData);
+   pPayload = pSysviewPointer;
+
+   return pPayload;
+}
+
 /*********************************************************************
 *
 *       _EncodeStr()
@@ -475,38 +509,42 @@ static U8* _EncodeData(U8* pPayload, const char* pSrc, unsigned int NumBytes) {
 *    No more than 1 + Limit bytes will be encoded to the payload.
 */
 static U8 *_EncodeStr(U8 *pPayload, const char *pText, unsigned int Limit) {
-  unsigned int n;
-  unsigned int Len;
-  //
-  // Compute string len
-  //
-  Len = 0;
-  if (pText != NULL) {
-    while(*(pText + Len) != 0) {
-      Len++;
-    }
-    if (Len > Limit) {
-      Len = Limit;
-    }
-  }
-  //
-  // Write Len
-  //
-  if (Len < 255)  {
-    *pPayload++ = (U8)Len;
+  U8* pLen;
+  const char* sStart;
+
+  if (pText == NULL) {
+    *pPayload++ = (U8)0;
   } else {
-    *pPayload++ = 255;
-    *pPayload++ = (Len & 255);
-    *pPayload++ = ((Len >> 8) & 255);
+    sStart = pText; // Remember start of string.
+    //
+    // Save space to store count byte(s).
+    //
+    pLen = pPayload++;
+#if (SEGGER_SYSVIEW_MAX_STRING_LEN >= 255)  // Length always encodes in 3 bytes
+    pPayload += 2;
+#endif
+    //
+    // Limit string to maximum length and copy into payload buffer.
+    //
+    if (Limit > SEGGER_SYSVIEW_MAX_STRING_LEN) {
+      Limit = SEGGER_SYSVIEW_MAX_STRING_LEN;
+    }
+    while ((Limit-- > 0) && (*pText != '\0')) {
+      *pPayload++ = *pText++;
+    }
+    //
+    // Save string length to buffer.
+    //
+#if (SEGGER_SYSVIEW_MAX_STRING_LEN >= 255)  // Length always encodes in 3 bytes
+    Limit = (unsigned int)(pText - sStart);
+    *pLen++ = (U8)255;
+    *pLen++ = (U8)((Limit >> 8) & 255);
+    *pLen++ = (U8)(Limit & 255);
+#else   // Length always encodes in 1 byte
+    *pLen = (U8)(pText - sStart);
+#endif
   }
   //
-  // copy string
-  //
-  n = 0;
-  while (n < Len) {
-    *pPayload++ = *pText++;
-    n++;
-  }
   return pPayload;
 }
 
@@ -693,7 +731,6 @@ static void _SendSyncInfo(void) {
     for (n = 0; n < _NumModules; n++) {
       SEGGER_SYSVIEW_SendModule(n);
     }
-    SEGGER_SYSVIEW_SendModuleDescription();
   }
 }
 #endif  // (SEGGER_SYSVIEW_POST_MORTEM_MODE == 1)
@@ -1218,6 +1255,7 @@ static void _VPrintTarget(const char* sFormat, U32 Options, va_list* pParamList)
   unsigned int  FormatFlags;
   unsigned int  FieldWidth;
   U8*           pPayloadStart;
+  const char*   s;
 #if SEGGER_SYSVIEW_USE_STATIC_BUFFER == 0
   RECORD_START(SEGGER_SYSVIEW_INFO_SIZE + SEGGER_SYSVIEW_MAX_STRING_LEN + 1 + 2 * SEGGER_SYSVIEW_QUANTA_U32);
   SEGGER_SYSVIEW_LOCK();
@@ -1322,6 +1360,20 @@ static void _VPrintTarget(const char* sFormat, U32 Options, va_list* pParamList)
         v = va_arg(*pParamList, int);
         _PrintUnsigned(&BufferDesc, (unsigned int)v, 16u, NumDigits, FieldWidth, FormatFlags);
         break;
+      case 's':
+        s = va_arg(*pParamList, const char*);
+        if (s == NULL) {
+          s = "(null)";
+        }
+        do {
+          c = *s;
+          s++;
+          if (c == '\0') {
+            break;
+          }
+         _StoreChar(&BufferDesc, c);
+        } while (BufferDesc.Cnt < SEGGER_SYSVIEW_MAX_STRING_LEN);
+        break;
       case 'p':
         v = va_arg(*pParamList, int);
         _PrintUnsigned(&BufferDesc, (unsigned int)v, 16u, 8u, 8u, 0u);
@@ -1954,11 +2006,61 @@ void SEGGER_SYSVIEW_SendTaskInfo(const SEGGER_SYSVIEW_TASKINFO *pInfo) {
   ENCODE_U32(pPayload, SHRINK_ID(pInfo->TaskID));
   ENCODE_U32(pPayload, pInfo->StackBase);
   ENCODE_U32(pPayload, pInfo->StackSize);
-  ENCODE_U32(pPayload, 0); // Stack End, future use
+  ENCODE_U32(pPayload, pInfo->StackUsage);
   _SendPacket(pPayloadStart, pPayload, SYSVIEW_EVTID_STACK_INFO);
   RECORD_END();
 }
 
+/*********************************************************************
+*
+*       SEGGER_SYSVIEW_SendStackInfo()
+*
+*  Function description
+*    Send a Stack Info Packet, containing TaskId for identification,
+*    stack base, stack size and stack usage.
+*
+*
+*  Parameters
+*    pInfo - Pointer to stack information to send.
+*/
+void SEGGER_SYSVIEW_SendStackInfo(const SEGGER_SYSVIEW_STACKINFO *pInfo) {
+  U8* pPayload;
+  U8* pPayloadStart;
+  RECORD_START(SEGGER_SYSVIEW_INFO_SIZE + 4 * SEGGER_SYSVIEW_QUANTA_U32);
+  //
+  pPayload = pPayloadStart;
+  ENCODE_U32(pPayload, SHRINK_ID(pInfo->TaskID));
+  ENCODE_U32(pPayload, pInfo->StackBase);
+  ENCODE_U32(pPayload, pInfo->StackSize);
+  ENCODE_U32(pPayload, pInfo->StackUsage);
+
+  RECORD_END();
+}
+
+/*********************************************************************
+*
+*        SEGGER_SYSVIEW_SampleData()
+*
+*  Function description
+*    Send a Data Sample Packet, containing the data Id and the value.
+*
+*
+*  Parameters
+*    pInfo - Pointer to data sample struct to send.
+*/
+void SEGGER_SYSVIEW_SampleData(const SEGGER_SYSVIEW_DATA_SAMPLE *pInfo) {
+  U8* pPayload;
+  U8* pPayloadStart;
+  RECORD_START(SEGGER_SYSVIEW_INFO_SIZE + 2 * SEGGER_SYSVIEW_QUANTA_U32);
+  //
+  pPayload = pPayloadStart;
+  ENCODE_U32(pPayload, pInfo->ID);
+  pPayload = _EncodeFloat(pPayload, *(pInfo->pFloat_Value));
+  _SendPacket(pPayloadStart, pPayload, SYSVIEW_EVTID_DATA_SAMPLE);
+
+  RECORD_END();
+}
+
 /*********************************************************************
 *
 *       SEGGER_SYSVIEW_SendTaskList()
@@ -2448,6 +2550,63 @@ void SEGGER_SYSVIEW_NameResource(U32 ResourceId, const char* sName) {
   RECORD_END();
 }
 
+/*********************************************************************
+*
+*       SEGGER_SYSVIEW_RegisterData()
+*
+*  Function description
+*    Register data to sample the values via SystemView.
+*
+*    Register functions are usually set in the system description
+*    callback, to ensure it is only sent when the SystemView Application
+*    is connected.
+*
+*  Parameters
+*    pInfo - Struct containing all possible properties that can be sent via this registration event.
+*/
+void SEGGER_SYSVIEW_RegisterData(SEGGER_SYSVIEW_DATA_REGISTER* pInfo) {
+  U8* pPayload;
+  U8* pPayloadStart;
+  RECORD_START(SEGGER_SYSVIEW_INFO_SIZE + 8 * SEGGER_SYSVIEW_QUANTA_U32 + 1 + SEGGER_SYSVIEW_MAX_STRING_LEN);
+  //
+  pPayload = pPayloadStart;
+  ENCODE_U32(pPayload, SYSVIEW_EVTID_EX_REGISTER_DATA);
+  ENCODE_U32(pPayload, pInfo->ID);
+  pPayload = _EncodeStr(pPayload, pInfo->sName, SEGGER_SYSVIEW_MAX_STRING_LEN);
+
+  if (pInfo->sName != 0) {
+    ENCODE_U32(pPayload, pInfo->DataType);
+    ENCODE_U32(pPayload, pInfo->Offset);
+    ENCODE_U32(pPayload, pInfo->RangeMin);
+    ENCODE_U32(pPayload, pInfo->RangeMax);
+    pPayload = _EncodeFloat(pPayload, pInfo->ScalingFactor);
+    pPayload = _EncodeStr(pPayload, pInfo->sUnit, SEGGER_SYSVIEW_MAX_STRING_LEN);
+  } else if (pInfo->ScalingFactor != 0) {
+    ENCODE_U32(pPayload, pInfo->DataType);
+    ENCODE_U32(pPayload, pInfo->Offset);
+    ENCODE_U32(pPayload, pInfo->RangeMin);
+    ENCODE_U32(pPayload, pInfo->RangeMax);
+    pPayload = _EncodeFloat(pPayload, pInfo->ScalingFactor);
+  } else if (pInfo->RangeMax != 0) {
+    ENCODE_U32(pPayload, pInfo->DataType);
+    ENCODE_U32(pPayload, pInfo->Offset);
+    ENCODE_U32(pPayload, pInfo->RangeMin);
+    ENCODE_U32(pPayload, pInfo->RangeMax);
+  } else if (pInfo->RangeMin != 0) {
+    ENCODE_U32(pPayload, pInfo->DataType);
+    ENCODE_U32(pPayload, pInfo->Offset);
+    ENCODE_U32(pPayload, pInfo->RangeMin);
+  } else if (pInfo->Offset != 0) {
+    ENCODE_U32(pPayload, pInfo->DataType);
+    ENCODE_U32(pPayload, pInfo->Offset);
+  } else if (pInfo->DataType != 0) {
+    ENCODE_U32(pPayload, pInfo->DataType);
+  }
+
+  _SendPacket(pPayloadStart, pPayload, SYSVIEW_EVTID_EX);
+  RECORD_END();
+}
+
 /*********************************************************************
 *
 *       SEGGER_SYSVIEW_HeapDefine()
@@ -2820,9 +2979,6 @@ void SEGGER_SYSVIEW_RegisterModule(SEGGER_SYSVIEW_MODULE* pModule) {
     _NumModules++;
   }
   SEGGER_SYSVIEW_SendModule(0);
-  if (pModule->pfSendModuleDesc) {
-    pModule->pfSendModuleDesc();
-  }
   SEGGER_SYSVIEW_UNLOCK();
 }
 
@@ -2906,6 +3062,9 @@ void SEGGER_SYSVIEW_SendModule(U8 ModuleId) {
       _SendPacket(pPayloadStart, pPayload, SYSVIEW_EVTID_MODULEDESC);
       RECORD_END();
     }
+    if (pModule && pModule->pfSendModuleDesc) {
+      pModule->pfSendModuleDesc();
+    }
   }
 }
 
@@ -2986,6 +3145,39 @@ void SEGGER_SYSVIEW_PrintfHostEx(const char* s, U32 Options, ...) {
 #endif
 }
 
+/*********************************************************************
+*
+*       SEGGER_SYSVIEW_VPrintfHostEx()
+*
+*  Function description
+*    Print a string which is formatted on the host by the SystemView Application
+*    with Additional information.
+*
+*  Parameters
+*    s          - String to be formatted.
+*    Options    - Options for the string. i.e. Log level.
+*    pParamList - Pointer to the list of arguments for the format string
+*
+*  Additional information
+*    All format arguments are treated as 32-bit scalar values.
+*/
+void SEGGER_SYSVIEW_VPrintfHostEx(const char* s, U32 Options, va_list *pParamList) {
+#if SEGGER_SYSVIEW_PRINTF_IMPLICIT_FORMAT
+  int r;
+  va_list ParamListCopy;
+  va_copy(ParamListCopy, *pParamList);
+
+  r = _VPrintHost(s, Options, pParamList);
+
+  if (r == -1) {
+    _VPrintTarget(s, Options, &ParamListCopy);
+  }
+  va_end(ParamListCopy);
+#else
+  _VPrintHost(s, Options, pParamList);
+#endif
+}
+
 /*********************************************************************
 *
 *       SEGGER_SYSVIEW_PrintfHost()
@@ -3020,6 +3212,37 @@ void SEGGER_SYSVIEW_PrintfHost(const char* s, ...) {
 #endif
 }
 
+/*********************************************************************
+*
+*       SEGGER_SYSVIEW_VPrintfHost()
+*
+*  Function description
+*    Print a string which is formatted on the host by the SystemView Application.
+*
+*  Parameters
+*    s          - String to be formatted.
+*    pParamList - Pointer to the list of arguments for the format string
+*
+*  Additional information
+*    All format arguments are treated as 32-bit scalar values.
+*/
+void SEGGER_SYSVIEW_VPrintfHost(const char* s, va_list *pParamList) {
+#if SEGGER_SYSVIEW_PRINTF_IMPLICIT_FORMAT
+  int r;
+  va_list ParamListCopy;
+  va_copy(ParamListCopy, *pParamList);
+
+  r = _VPrintHost(s, SEGGER_SYSVIEW_LOG, pParamList);
+
+  if (r == -1) {
+    _VPrintTarget(s, SEGGER_SYSVIEW_LOG, &ParamListCopy);
+  }
+  va_end(ParamListCopy);
+#else
+  _VPrintHost(s, SEGGER_SYSVIEW_LOG, pParamList);
+#endif
+}
+
 /*********************************************************************
 *
 *       SEGGER_SYSVIEW_WarnfHost()
@@ -3055,6 +3278,38 @@ void SEGGER_SYSVIEW_WarnfHost(const char* s, ...) {
 #endif
 }
 
+/*********************************************************************
+*
+*       SEGGER_SYSVIEW_VWarnfHost()
+*
+*  Function description
+*    Print a warning string which is formatted on the host by
+*    the SystemView Application.
+*
+*  Parameters
+*    s          - String to be formatted.
+*    pParamList - Pointer to the list of arguments for the format string
+*
+*  Additional information
+*    All format arguments are treated as 32-bit scalar values.
+*/
+void SEGGER_SYSVIEW_VWarnfHost(const char* s, va_list *pParamList) {
+#if SEGGER_SYSVIEW_PRINTF_IMPLICIT_FORMAT
+  int r;
+  va_list ParamListCopy;
+  va_copy(ParamListCopy, *pParamList);
+
+  r = _VPrintHost(s, SEGGER_SYSVIEW_WARNING, pParamList);
+
+  if (r == -1) {
+    _VPrintTarget(s, SEGGER_SYSVIEW_WARNING, &ParamListCopy);
+  }
+  va_end(ParamListCopy);
+#else
+  _VPrintHost(s, SEGGER_SYSVIEW_WARNING, pParamList);
+#endif
+}
+
 /*********************************************************************
 *
 *       SEGGER_SYSVIEW_ErrorfHost()
@@ -3090,6 +3345,38 @@ void SEGGER_SYSVIEW_ErrorfHost(const char* s, ...) {
 #endif
 }
 
+/*********************************************************************
+*
+*       SEGGER_SYSVIEW_VErrorfHost()
+*
+*  Function description
+*    Print a warning string which is formatted on the host by
+*    the SystemView Application.
+*
+*  Parameters
+*    s          - String to be formatted.
+*    pParamList - Pointer to the list of arguments for the format string
+*
+*  Additional information
+*    All format arguments are treated as 32-bit scalar values.
+*/
+void SEGGER_SYSVIEW_VErrorfHost(const char* s, va_list *pParamList) {
+#if SEGGER_SYSVIEW_PRINTF_IMPLICIT_FORMAT
+  int r;
+  va_list ParamListCopy;
+  va_copy(ParamListCopy, *pParamList);
+
+  r = _VPrintHost(s, SEGGER_SYSVIEW_ERROR, pParamList);
+
+  if (r == -1) {
+    _VPrintTarget(s, SEGGER_SYSVIEW_ERROR, &ParamListCopy);
+  }
+  va_end(ParamListCopy);
+#else
+  _VPrintHost(s, SEGGER_SYSVIEW_ERROR, pParamList);
+#endif
+}
+
 /*********************************************************************
 *
 *       SEGGER_SYSVIEW_PrintfTargetEx()
@@ -3110,6 +3397,23 @@ void SEGGER_SYSVIEW_PrintfTargetEx(const char* s, U32 Options, ...) {
   va_end(ParamList);
 }
 
+/*********************************************************************
+*
+*       SEGGER_SYSVIEW_VPrintfTargetEx()
+*
+*  Function description
+*    Print a string which is formatted on the target before sent to
+*    the host with Additional information.
+*
+*  Parameters
+*    s          - String to be formatted.
+*    Options    - Options for the string. i.e. Log level.
+*    pParamList - Pointer to the list of arguments for the format string
+*/
+void SEGGER_SYSVIEW_VPrintfTargetEx(const char* s, U32 Options, va_list *pParamList) {
+  _VPrintTarget(s, Options, pParamList);
+}
+
 /*********************************************************************
 *
 *       SEGGER_SYSVIEW_PrintfTarget()
@@ -3129,6 +3433,22 @@ void SEGGER_SYSVIEW_PrintfTarget(const char* s, ...) {
   va_end(ParamList);
 }
 
+/*********************************************************************
+*
+*       SEGGER_SYSVIEW_VPrintfTarget()
+*
+*  Function description
+*    Print a string which is formatted on the target before sent to
+*    the host.
+*
+*  Parameters
+*    s          - String to be formatted.
+*    pParamList - Pointer to the list of arguments for the format string
+*/
+void SEGGER_SYSVIEW_VPrintfTarget(const char* s, va_list* pParamList) {
+  _VPrintTarget(s, SEGGER_SYSVIEW_LOG, pParamList);
+}
+
 /*********************************************************************
 *
 *       SEGGER_SYSVIEW_WarnfTarget()
@@ -3148,6 +3468,22 @@ void SEGGER_SYSVIEW_WarnfTarget(const char* s, ...) {
   va_end(ParamList);
 }
 
+/*********************************************************************
+*
+*       SEGGER_SYSVIEW_VWarnfTarget()
+*
+*  Function description
+*    Print a warning string which is formatted on the target before
+*    sent to the host.
+*
+*  Parameters
+*    s          - String to be formatted.
+*    pParamList - Pointer to the list of arguments for the format string
+*/
+void SEGGER_SYSVIEW_VWarnfTarget(const char* s, va_list* pParamList) {
+  _VPrintTarget(s, SEGGER_SYSVIEW_WARNING, pParamList);
+}
+
 /*********************************************************************
 *
 *       SEGGER_SYSVIEW_ErrorfTarget()
@@ -3166,6 +3502,22 @@ void SEGGER_SYSVIEW_ErrorfTarget(const char* s, ...) {
   _VPrintTarget(s, SEGGER_SYSVIEW_ERROR, &ParamList);
   va_end(ParamList);
 }
+
+/*********************************************************************
+*
+*       SEGGER_SYSVIEW_VErrorfTarget()
+*
+*  Function description
+*    Print an error string which is formatted on the target before
+*    sent to the host.
+*
+*  Parameters
+*    s          - String to be formatted.
+*    pParamList - Pointer to the list of arguments for the format string
+*/
+void SEGGER_SYSVIEW_VErrorfTarget(const char* s, va_list* pParamList) {
+  _VPrintTarget(s, SEGGER_SYSVIEW_ERROR, pParamList);
+}
 #endif // SEGGER_SYSVIEW_EXCLUDE_PRINTF
 
 /*********************************************************************

components/app_trace/sys_view/SEGGER/SEGGER_SYSVIEW.h

@@ -3,14 +3,14 @@
  *
  * SPDX-License-Identifier: BSD-1-Clause
  *
- * SPDX-FileContributor: 2023 Espressif Systems (Shanghai) CO LTD
+ * SPDX-FileContributor: 2023-2024 Espressif Systems (Shanghai) CO LTD
  */
 /*********************************************************************
 *                    SEGGER Microcontroller GmbH                     *
 *                        The Embedded Experts                        *
 **********************************************************************
 *                                                                    *
-*            (c) 1995 - 2021 SEGGER Microcontroller GmbH             *
+*            (c) 1995 - 2024 SEGGER Microcontroller GmbH             *
 *                                                                    *
 *       www.segger.com     Support: support@segger.com               *
 *                                                                    *
@@ -49,13 +49,13 @@
 *                                                                    *
 **********************************************************************
 *                                                                    *
-*       SystemView version: 3.42                                    *
+*       SystemView version: 3.56                                    *
 *                                                                    *
 **********************************************************************
 -------------------------- END-OF-HEADER -----------------------------
 File    : SEGGER_SYSVIEW.h
 Purpose : System visualization API.
-Revision: $Rev: 28237 $
+Revision: $Rev: 28768 $
 */
 
 #ifndef SEGGER_SYSVIEW_H
@@ -123,7 +123,7 @@ extern "C" {
 #define   SYSVIEW_EVTID_TIMER_EXIT        20
 #define   SYSVIEW_EVTID_STACK_INFO        21
 #define   SYSVIEW_EVTID_MODULEDESC        22
-
+#define   SYSVIEW_EVTID_DATA_SAMPLE       23
 #define   SYSVIEW_EVTID_INIT              24
 #define   SYSVIEW_EVTID_NAME_RESOURCE     25
 #define   SYSVIEW_EVTID_PRINT_FORMATTED   26
@@ -135,12 +135,13 @@ extern "C" {
 //
 // SystemView extended events. Sent with ID 31.
 //
-#define   SYSVIEW_EVTID_EX_MARK            0
-#define   SYSVIEW_EVTID_EX_NAME_MARKER     1
-#define   SYSVIEW_EVTID_EX_HEAP_DEFINE     2
-#define   SYSVIEW_EVTID_EX_HEAP_ALLOC      3
-#define   SYSVIEW_EVTID_EX_HEAP_ALLOC_EX   4
-#define   SYSVIEW_EVTID_EX_HEAP_FREE       5
+#define   SYSVIEW_EVTID_EX_MARK           0
+#define   SYSVIEW_EVTID_EX_NAME_MARKER    1
+#define   SYSVIEW_EVTID_EX_HEAP_DEFINE    2
+#define   SYSVIEW_EVTID_EX_HEAP_ALLOC     3
+#define   SYSVIEW_EVTID_EX_HEAP_ALLOC_EX  4
+#define   SYSVIEW_EVTID_EX_HEAP_FREE      5
+#define   SYSVIEW_EVTID_EX_REGISTER_DATA  6
 //
 // Event masks to disable/enable events
 //
@@ -167,7 +168,7 @@ extern "C" {
 #define   SYSVIEW_EVTMASK_TIMER_EXIT        (1 << SYSVIEW_EVTID_TIMER_EXIT)
 #define   SYSVIEW_EVTMASK_STACK_INFO        (1 << SYSVIEW_EVTID_STACK_INFO)
 #define   SYSVIEW_EVTMASK_MODULEDESC        (1 << SYSVIEW_EVTID_MODULEDESC)
-
+#define   SYSVIEW_EVTMASK_DATA_SAMPLE       (1 << SYSVIEW_EVTID_DATA_SAMPLE)
 #define   SYSVIEW_EVTMASK_INIT              (1 << SYSVIEW_EVTID_INIT)
 #define   SYSVIEW_EVTMASK_NAME_RESOURCE     (1 << SYSVIEW_EVTID_NAME_RESOURCE)
 #define   SYSVIEW_EVTMASK_PRINT_FORMATTED   (1 << SYSVIEW_EVTID_PRINT_FORMATTED)
@@ -202,8 +203,42 @@ typedef struct {
   U32          Prio;
   U32          StackBase;
   U32          StackSize;
+  U32          StackUsage;
 } SEGGER_SYSVIEW_TASKINFO;
 
+typedef struct {
+  U32          TaskID;
+  U32          StackBase;
+  U32          StackSize;
+  U32          StackUsage;
+} SEGGER_SYSVIEW_STACKINFO;
+
+typedef struct {
+  U32          ID;
+  union {
+    U32*   pU32_Value;
+    I32*   pI32_Value;
+    float* pFloat_Value;
+  };
+} SEGGER_SYSVIEW_DATA_SAMPLE;
+
+typedef enum {
+  SEGGER_SYSVIEW_TYPE_U32   = 0,
+  SEGGER_SYSVIEW_TYPE_I32   = 1,
+  SEGGER_SYSVIEW_TYPE_FLOAT = 2
+} SEGGER_SYSVIEW_DATA_TYPE;
+
+typedef struct {
+  U32                           ID;
+  SEGGER_SYSVIEW_DATA_TYPE      DataType;
+  I32                           Offset;
+  I32                           RangeMin;
+  I32                           RangeMax;
+  float                         ScalingFactor;
+  const char*                   sName;
+  const char*                   sUnit;
+}  SEGGER_SYSVIEW_DATA_REGISTER;
+
 typedef struct SEGGER_SYSVIEW_MODULE_STRUCT SEGGER_SYSVIEW_MODULE;
 
 struct SEGGER_SYSVIEW_MODULE_STRUCT {
@@ -247,8 +282,8 @@ EXTERN unsigned int SEGGER_SYSVIEW_InterruptId;
 */
 
 typedef struct {
-  U64  (*pfGetTime)      (void);
-  void (*pfSendTaskList) (void);
+  U64  (*pfGetTime)               (void);
+  void (*pfSendTaskList)          (void);
 } SEGGER_SYSVIEW_OS_API;
 
 /*********************************************************************
@@ -262,9 +297,13 @@ void SEGGER_SYSVIEW_Stop                          (void);
 void SEGGER_SYSVIEW_GetSysDesc                    (void);
 void SEGGER_SYSVIEW_SendTaskList                  (void);
 void SEGGER_SYSVIEW_SendTaskInfo                  (const SEGGER_SYSVIEW_TASKINFO* pInfo);
+void SEGGER_SYSVIEW_SendStackInfo                 (const SEGGER_SYSVIEW_STACKINFO* pInfo);
 void SEGGER_SYSVIEW_SendSysDesc                   (const char* sSysDesc);
 int  SEGGER_SYSVIEW_IsStarted                     (void);
 int  SEGGER_SYSVIEW_GetChannelID                  (void);
+
+void  SEGGER_SYSVIEW_SampleData                   (const SEGGER_SYSVIEW_DATA_SAMPLE *pInfo);
+
 // Checks whether tracing has been started
 U8 SEGGER_SYSVIEW_Started(void);
 
@@ -311,6 +350,7 @@ void SEGGER_SYSVIEW_HeapAllocEx                   (void* pHeap, void* pUserData,
 void SEGGER_SYSVIEW_HeapFree                      (void* pHeap, void* pUserData);
 
 void SEGGER_SYSVIEW_NameResource                  (U32 ResourceId, const char* sName);
+void SEGGER_SYSVIEW_RegisterData                  ( SEGGER_SYSVIEW_DATA_REGISTER* pInfo);
 
 int  SEGGER_SYSVIEW_SendPacket                    (U8* pPacket, U8* pPayloadEnd, unsigned int EventId);
 
@@ -341,13 +381,21 @@ void SEGGER_SYSVIEW_SendNumModules                (void);
 */
 #ifndef SEGGER_SYSVIEW_EXCLUDE_PRINTF // Define in project to avoid warnings about variable parameter list
 void SEGGER_SYSVIEW_PrintfHostEx                  (const char* s, U32 Options, ...);
+void SEGGER_SYSVIEW_VPrintfHostEx                 (const char* s, U32 Options, va_list* pParamList);
 void SEGGER_SYSVIEW_PrintfTargetEx                (const char* s, U32 Options, ...);
+void SEGGER_SYSVIEW_VPrintfTargetEx               (const char* s, U32 Options, va_list* pParamList);
 void SEGGER_SYSVIEW_PrintfHost                    (const char* s, ...);
+void SEGGER_SYSVIEW_VPrintfHost                   (const char* s, va_list* pParamList);
 void SEGGER_SYSVIEW_PrintfTarget                  (const char* s, ...);
+void SEGGER_SYSVIEW_VPrintfTarget                 (const char* s, va_list* pParamList);
 void SEGGER_SYSVIEW_WarnfHost                     (const char* s, ...);
+void SEGGER_SYSVIEW_VWarnfHost                    (const char* s, va_list* pParamList);
 void SEGGER_SYSVIEW_WarnfTarget                   (const char* s, ...);
+void SEGGER_SYSVIEW_VWarnfTarget                  (const char* s, va_list* pParamList);
 void SEGGER_SYSVIEW_ErrorfHost                    (const char* s, ...);
+void SEGGER_SYSVIEW_VErrorfHost                   (const char* s, va_list* pParamList);
 void SEGGER_SYSVIEW_ErrorfTarget                  (const char* s, ...);
+void SEGGER_SYSVIEW_VErrorfTarget                 (const char* s, va_list* pParamList);
 #endif
 
 void SEGGER_SYSVIEW_Print                         (const char* s);

components/app_trace/sys_view/SEGGER/SEGGER_SYSVIEW_ConfDefaults.h

@@ -3,14 +3,14 @@
  *
  * SPDX-License-Identifier: BSD-1-Clause
  *
- * SPDX-FileContributor: 2023 Espressif Systems (Shanghai) CO LTD
+ * SPDX-FileContributor: 2023-2024 Espressif Systems (Shanghai) CO LTD
  */
 /*********************************************************************
 *                    SEGGER Microcontroller GmbH                     *
 *                        The Embedded Experts                        *
 **********************************************************************
 *                                                                    *
-*            (c) 1995 - 2021 SEGGER Microcontroller GmbH             *
+*            (c) 1995 - 2024 SEGGER Microcontroller GmbH             *
 *                                                                    *
 *       www.segger.com     Support: support@segger.com               *
 *                                                                    *
@@ -49,7 +49,7 @@
 *                                                                    *
 **********************************************************************
 *                                                                    *
-*       SystemView version: 3.42                                    *
+*       SystemView version: 3.56                                    *
 *                                                                    *
 **********************************************************************
 -------------------------- END-OF-HEADER -----------------------------
@@ -72,6 +72,8 @@ Revision: $Rev: 26230 $
 #include "SEGGER_SYSVIEW_Conf.h"
 #include "SEGGER_RTT_Conf.h"
 
+#include "esp_assert.h"
+
 #ifdef __cplusplus
 extern "C" {
 #endif
@@ -370,12 +372,14 @@ extern "C" {
   #define SEGGER_SYSVIEW_MAX_STRING_LEN           128
 #endif
 
+ESP_STATIC_ASSERT(SEGGER_SYSVIEW_MAX_STRING_LEN < 255, "SEGGER Sysview string length must be less than 255.");
+
 /*********************************************************************
 *
 *       Define: SEGGER_SYSVIEW_SUPPORT_LONG_ID
 *
 *  Description
-*    It set, support enconding Evend Ids longer than 14 bit.
+*    It set, support encoding Evend Ids longer than 14 bit.
 *  Default
 *    1
 */
@@ -388,7 +392,7 @@ extern "C" {
 *       Define: SEGGER_SYSVIEW_SUPPORT_LONG_DATA
 *
 *  Description
-*    It set, support enconding event data longer than 14 bit.
+*    It set, support encoding event data longer than 14 bit.
 *  Default
 *    0
 */
@@ -517,7 +521,7 @@ extern "C" {
 *       Define: SEGGER_SYSVIEW_SYNC_PERIOD_SHIFT
 *
 *  Description
-*    Configure how frequently syncronization is sent in post-mortem
+*    Configure how frequently synchronization is sent in post-mortem
 *    mode.
 *  Default
 *    8: (1 << 8) = Every 256 Events.

components/app_trace/sys_view/SEGGER/SEGGER_SYSVIEW_Int.h

@@ -8,7 +8,7 @@
 *                        The Embedded Experts                        *
 **********************************************************************
 *                                                                    *
-*            (c) 1995 - 2021 SEGGER Microcontroller GmbH             *
+*            (c) 1995 - 2024 SEGGER Microcontroller GmbH             *
 *                                                                    *
 *       www.segger.com     Support: support@segger.com               *
 *                                                                    *
@@ -47,7 +47,7 @@
 *                                                                    *
 **********************************************************************
 *                                                                    *
-*       SystemView version: 3.42                                    *
+*       SystemView version: 3.56                                    *
 *                                                                    *
 **********************************************************************
 -------------------------- END-OF-HEADER -----------------------------

components/app_trace/sys_view/SEGGER/sbom.yml

@@ -0,0 +1,6 @@
+name: 'SystemView'
+version: '3.56'
+cpe: cpe:2.3:a:segger:systemview:{}:*:*:*:*:*:*:*
+supplier: 'Organization: Espressif Systems (Shanghai) CO LTD'
+originator: 'Organization: SEGGER Microcontroller GmbH'
+description: Real-time recording and visualization tool for embedded systems.

components/app_trace/sys_view/Sample/FreeRTOSV10.4/Config/esp/SEGGER_SYSVIEW_Config_FreeRTOS.c

@@ -3,7 +3,7 @@
  *
  * SPDX-License-Identifier: BSD-1-Clause
  *
- * SPDX-FileContributor: 2017-2022 Espressif Systems (Shanghai) CO LTD
+ * SPDX-FileContributor: 2017-2024 Espressif Systems (Shanghai) CO LTD
  */
 /*********************************************************************
 *                    SEGGER Microcontroller GmbH                     *
@@ -58,6 +58,7 @@ File    : SEGGER_SYSVIEW_Config_FreeRTOS.c
 Purpose : Sample setup configuration of SystemView with FreeRTOS.
 Revision: $Rev: 7745 $
 */
+#include <string.h>
 #include "sdkconfig.h"
 #include "freertos/FreeRTOS.h"
 #include "SEGGER_SYSVIEW.h"
@@ -156,15 +157,16 @@ static esp_apptrace_lock_t s_sys_view_lock = {.mux = portMUX_INITIALIZER_UNLOCKE
 *    Sends SystemView description strings.
 */
 static void _cbSendSystemDesc(void) {
-    char irq_str[32];
+    char irq_str[32] = "I#";
     SEGGER_SYSVIEW_SendSysDesc("N="SYSVIEW_APP_NAME",D="SYSVIEW_DEVICE_NAME",C="SYSVIEW_CORE_NAME",O=FreeRTOS");
-    snprintf(irq_str, sizeof(irq_str), "I#%d=SysTick", SYSTICK_INTR_ID);
+    strcat(itoa(SYSTICK_INTR_ID, irq_str + 2, 10), "=SysTick");
     SEGGER_SYSVIEW_SendSysDesc(irq_str);
     size_t isr_count = sizeof(esp_isr_names)/sizeof(esp_isr_names[0]);
     for (size_t i = 0; i < isr_count; ++i) {
         if (esp_isr_names[i] == NULL || (ETS_INTERNAL_INTR_SOURCE_OFF + i) == SYSTICK_INTR_ID)
             continue;
-        snprintf(irq_str, sizeof(irq_str), "I#%d=%s", ETS_INTERNAL_INTR_SOURCE_OFF + i, esp_isr_names[i]);
+        strcat(itoa(ETS_INTERNAL_INTR_SOURCE_OFF + i, irq_str + 2, 10), "=");
+        strncat(irq_str, esp_isr_names[i], sizeof(irq_str) - strlen(irq_str) - 1);
         SEGGER_SYSVIEW_SendSysDesc(irq_str);
     }
 }

components/app_trace/sys_view/esp/SEGGER_RTT_esp.c

@@ -35,7 +35,7 @@ static uint8_t s_down_buf[SYSVIEW_DOWN_BUF_SIZE];
 #if CONFIG_APPTRACE_SV_DEST_UART
 
 #define ESP_APPTRACE_DEST_SYSVIEW ESP_APPTRACE_DEST_UART
-#if CONFIG_APPTRACE_SV_DEST_CPU_0 || CONFIG_FREERTOS_UNICORE
+#if CONFIG_APPTRACE_SV_DEST_CPU_0 || CONFIG_ESP_SYSTEM_SINGLE_CORE_MODE
 #define APPTRACE_SV_DEST_CPU 0
 #else
 #define APPTRACE_SV_DEST_CPU 1
@@ -296,7 +296,7 @@ int SEGGER_RTT_ConfigDownBuffer(unsigned BufferIndex, const char* sName, void* p
  * linked whenever SystemView is used.
  */
 
-ESP_SYSTEM_INIT_FN(sysview_init, BIT(0), 120)
+ESP_SYSTEM_INIT_FN(sysview_init, SECONDARY, BIT(0), 120)
 {
     SEGGER_SYSVIEW_Conf();
     return ESP_OK;